 |
Datenblatt-Suchmaschine für elektronische Bauteile |
|
|
Datenblatt-Suchmaschine für elektronische Bauteile |
|
2010H-R68N-R Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
 Pasternack Enterprises US | PE3C2010-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.1/9.5 Mini DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ Low PIM, RF Cable Type: PE-SR402FLJ Low PIM, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 4.1/9.5 Mini DIN Male to 4.1/9.5 Mini DIN Female LSZH Jacketed Low PIM Cable 100 cm Length Using SR402FLJ Low PIM Coax with HeatShrink, RoHS., Radio frequency assembly 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female LSZH jacketed low PIM cable 100 cm length using SR402FLJ low PIM coax with heatshrink, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female LSZH jacketed low PIM cable 100 cm length using SR402FLJ low PIM coax with heatshrink, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.1/9.5 mini DIN cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable is a male to female coax assembly, PE3C2010-100CM, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN jack cable assembly PE3C2010-100CM is built with PE-SR402FLJ low PIM which is a formable coax type. The Pasternack low passive intermodulation formable 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2010-100CM can also be used in the other direction and will be 4.1/9.5 mini DIN female to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female LSZH jacketed low PIM cable 100 cm length using SR402FLJ low PIM coax with heatshrink, RoHS. |
| 22 | |
| PE3C2010 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.1/9.5 Mini DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ Low PIM, RF Cable Type: PE-SR402FLJ Low PIM, RF Cable Impedance: 50 Ohm. 4.1/9.5 Mini DIN Male to 4.1/9.5 Mini DIN Female LSZH Jacketed Low PIM Cable Using SR402FLJ Low PIM Coax with HeatShrink, RoHS., Radio frequency assembly 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female LSZH jacketed low PIM cable using SR402FLJ low PIM coax with heatshrink, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female LSZH jacketed low PIM cable using SR402FLJ low PIM coax with heatshrink, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 Mini DIN to 4.1/9.5 Mini DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 Mini DIN cable connection on one end and 4.1/9.5 Mini DIN cable connection on the other. Our low PIM 4.1/9.5 Mini DIN to 4.1/9.5 Mini DIN cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 Mini DIN to 4.1/9.5 Mini DIN cable is a male to female coax assembly, PE3C2010, can also be known as a low PIM 4.1/9.5 Mini DIN plug to 4.1/9.5 Mini DIN jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 Mini DIN plug to 4.1/9.5 Mini DIN jack cable assembly PE3C2010 is built with PE-SR402FLJ low PIM which is a formable coax type. The Pasternack low passive intermodulation formable 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 Mini DIN to 4.1/9.5 Mini DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 Mini DIN male to 4.1/9.5 Mini DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2010 can also be used in the other direction and will be 4.1/9.5 Mini DIN female to 4.1/9.5 Mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 Mini DIN plug to 4.1/9.5 Mini DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 Mini DIN to 4.1/9.5 Mini DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 Mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female LSZH jacketed low PIM cable using SR402FLJ low PIM coax with heatshrink, RoHS. | 22 | |||
| PE71S2010 | Pasternack Enterprises | Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Absorptive, Minimum Frequency: 70 MHz, Maximum Frequency: 26.5 GHz, Impedance: 50 Ohm, Maximum Input Power: 0.5 Watts, Maximum Insertion Loss: 5 dB, Minimum Isolation: 55 dB. Absorptive SPDT PIN Diode Switch Operating From 70 MHz to 26.5 GHz Up to +27 dBm and SMA. PE71S2010 PIN diode switch from Pasternack is a Absorptive design. Our RF Absorptive PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Absorptive switch has a minimum frequency of 70 MHz and a maximum frequency of 26.5 GHz. The Pasternack PIN diode Absorptive RF switch is rated at a switching speed of 100 ns and a maximum input power of 0.5 Watts (+27 dBm ). Insertion loss maximum of this SMA Absorptive switch is 5 dB with an isolation minimum of 55 dB. Absorptive PIN diode radio frequency switch PE71S2010 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Absorptive SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts. |
| 3 | ||
| PE80L2010 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 50 MHz, Maximum Frequency: 6 GHz, Maximum Insertion Loss: 2 dB, Design Type: High Power, Peak Power: 100 Watt. High Power Limiter, SMA, 100W Peak Power, 16.5 dBm Flat Leakage, 50 MHz to 6 GHz. The PE80L2010 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 100 watts. Our PE80L2010 is a high power coaxial RF power limiter with a maximum insertion loss of 2 dB. Pasternack SMA to SMA limiter has a minimum frequency of 50 MHz and a maximum frequency of 6 GHz. This high-quality radio frequency limiter is constructed of copper and has a typical leakage power of 16.5 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 1.5 dB. Our 100 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.5:1 and whereas the typical output VSWR is 2:1. Our PE80L2010 limiter supports a maximum average input power of 30 W. This high power limiter is 1.26 inches long, 0.71 inches wide, and 0.39 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE3W20104 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Male to Slide-On BMA Jack Bulkhead Cable Using PE-SR405FL Coax. PE3W20104 is a SMA male to BMA jack bulkhead cable using PE-SR405FL coax. This Pasternack SMA male to BMA jack bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BMA for connector 2. Our male SMA to jack BMA bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W20104 SMA male to BMA jack bulkhead cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE3W12010 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female Bulkhead to MMCX Plug Right Angle Cable Using RG316 Coax. PE3W12010 is a reverse polarity SMA female bulkhead to MMCX plug right angle cable using RG316 coax. This Pasternack reverse polarity SMA female bulkhead to MMCX plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MMCX for connector 2. SMA to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity female SMA bulkhead to plug MMCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12010 SMA reverse polarity female bulkhead to MMCX plug right angle cable assembly is constructed with RG316 coax. | 0 | |||
| PE7520-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: QMA, Connector-In Gender: Male, Connector-Out Series: QMA, Connector-Out Gender: Female. 10 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 2 Watts Up to 6 GHz. PE7520-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7520-10 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. Our fixed radio frequency attenuator with QMA connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7520-10 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, 5G cellular bands and DAS systems applications. The 10 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7520-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE3FCA720-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: MPO (w/o pins), Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. MPO/UPC Male (pins) to MPO/UPC Female (w/o pins), 16 Fiber, Type B, Multimode OM4, LSZH Jacket-10M. Pasternack’s PE3FCA720-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long patch cable assembly is equipped with MPO (w/ pins)/UPC key up to MPO (w/o pins)/UPC key up connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. As an OM4 fiber optic jumper, Pasternack’s PE3FCA720-10M is designed for ultra-high-speed, high-bandwidth data transmission, supporting greater distances and faster speeds than OM1 and OM3 fiber.The fiber optic jumper from Pasternack is suitable for applications such as 400G and 800G parallel optics interconnects in hyperscale data centers, high-density spine-leaf network backbone cabling applications, direct connectivity between MPO transceivers and patching infrastructure, trunk cabling for cassette-based fiber distribution systems, switch-to-switch and core network aggregation links and future-ready fiber deployments supporting next-generation optical migration. With the flexibility of custom lengths, the PE3FCA720-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 16-strand fiber optic patch cord can be found on its downloadable PDF datasheet. This PE3FCA720-10M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to MPO (w/o pins)/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W20108 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. SMA Male to 7/16 DIN Male Cable Using 53 Ohm RG55 Coax. PE3W20108 is a SMA male to 7/16 DIN male cable using RG55 coax. This Pasternack SMA male to 7/16 DIN male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male SMA to male 7/16 DIN cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W20108 SMA male to 7/16 DIN male cable assembly is constructed with RG55 coax. | 0 | |||
| PE3W20102 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. BNC Male to N Male Cable Using LMR-240 Coax. PE3W20102 is a BNC male to N male cable using LMR-240 coax. This Pasternack BNC male to N male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm N for connector 2. Our male BNC to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20102 BNC male to N male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W22010 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. 2.92mm Female 2 Hole Flange to 2.4mm Male Cable Using PE-047SR Tan Coax. PE3W22010 is a 2.92mm female 2 hole flange to 2.4mm male cable using PE-047SR coax. This Pasternack 2.92mm female 2 hole flange to 2.4mm male cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm 2.4mm for connector 2. Our female 2.92mm 2 hole flange to male 2.4mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W22010 2.92mm female 2 hole flange to 2.4mm male cable assembly is constructed with PE-047SR coax. | 0 | |||
| PE3W20100 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Thread, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. Reverse Thread SMA Male to SMA Male Cable Using RG400 Coax. PE3W20100 is a reverse thread SMA male to SMA male cable using RG400 coax. This Pasternack reverse thread SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse thread male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20100 SMA reverse thread male to SMA male cable assembly is constructed with RG400 coax. | 0 | |||
| PE88X2010 | Pasternack Enterprises | Key Specifications, Input Frequency, Min: 10 MHz, Input Frequency, Max: 1 GHz, Output Frequency, Min: 20 MHz, Output Frequency, Max: 2 GHz, Conversion Loss: 16 dB, Input VSWR, Max: 2, Output VSWR, MAX: 2. 2x Frequency Multiplier, 20 MHz to 2000 MHz Output Frequency, 12.0 dB Conversion Loss, SMA. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2010 from Pasternack has SMA conectors and are 50 Ohm. Our SMA frequency multiplier is manufactured for a minimum frequency input of 10 MHz and a maximum frequency input of 1 GHz. This SMA microwave frequency multiplier / doubler output minimum frequency is 20 MHz and output maximum frequency of 2 GHz. SMA frequency doubler / multiplier PE88X2010 from Pasternack is rated for a dBm P1dB and is just one part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock; Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. |
| 0 | ||
| PE3W20105 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to SMA Male Cable Using RG402 Coax. PE3W20105 is a BMA plug bulkhead to SMA male cable using RG402 coax. This Pasternack BMA plug bulkhead to SMA male cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm SMA for connector 2. Our plug BMA bulkhead to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20105 BMA plug bulkhead to SMA male cable assembly is constructed with RG402 coax. | 0 | |||
| PE3W20109 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. SMA Male Right Angle to BNC Male Cable Using 53 Ohm RG55 Coax. PE3W20109 is a SMA male right angle to BNC male cable using RG55 coax. This Pasternack SMA male right angle to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. SMA right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male BNC cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W20109 SMA male right angle to BNC male cable assembly is constructed with RG55 coax. | 0 | |||
 Teledyne HiRel | 5962-9220101MDA | Teledyne HiRel | PARITY GENERATOR/CHECKER, 9-BIT RoHS : Not Compliant | 0 | ||
| 5962-9220101M2A | Teledyne HiRel | PARITY GENERATOR/CHECKER, 9-BIT RoHS : Not Compliant | 0 | |||
| 5962-9220101MCA | Teledyne HiRel | PARITY GENERATOR/CHECKER, 9-BIT RoHS : Not Compliant | 0 | |||
| 5962-9320101QXA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 16-BIT, EDGE-TRIGGERED, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | C0603HQN201-0R5BNP | VENKEL LTD | High-Q NP0 Chip Capacitor;0603;HQN;200V;0.5pF;�0.1pF RoHS : Compliant | 0 | ||
| C1111HQN201-0R9BNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;200V;0.9pF;�0.1pF RoHS : Compliant | 0 | |||
| SWCR2010-WK-123MT | VENKEL LTD | Surge Withstanding CR;2010;3/4W;�100PPM;12K;�20% RoHS : Compliant | 0 | |||
| SWCR2010-WK-152KT | VENKEL LTD | Surge Withstanding CR;2010;3/4W;�100PPM;1.5K;�10% RoHS : Compliant | 0 | |||
| SWCR2010-WK-204MT | VENKEL LTD | Surge Withstanding CR;2010;3/4W;�100PPM;200K;�20% RoHS : Compliant | 0 | |||
| SWCR2010-WK-225JT | VENKEL LTD | Surge Withstanding CR;2010;3/4W;�100PPM;2.2M;�5% RoHS : Compliant | 0 | |||
| SWCR2010-WK-270JT | VENKEL LTD | Surge Withstanding CR;2010;3/4W;�100PPM;27R;�5% RoHS : Compliant | 0 | |||
| SWCR2010-WK-330MT | VENKEL LTD | Surge Withstanding CR;2010;3/4W;�100PPM;33R;�20% RoHS : Compliant | 0 | |||
| SWCR2010-WK-432JT | VENKEL LTD | Surge Withstanding CR;2010;3/4W;�100PPM;4.3K;�5% RoHS : Compliant | 0 | |||
| SWCR2010-WK-513JT | VENKEL LTD | Surge Withstanding CR;2010;3/4W;�100PPM;51K;�5% RoHS : Compliant | 0 | |||
| SWCR2010-WK-684KT | VENKEL LTD | Surge Withstanding CR;2010;3/4W;�100PPM;680K;�10% RoHS : Compliant | 0 | |||
| SWCR2010-WL-120MT | VENKEL LTD | Surge Withstanding CR;2010;3/4W;�200PPM;12R;�20% RoHS : Compliant | 0 | |||
| SWCR2010-WL-1R0KT | VENKEL LTD | Surge Withstanding CR;2010;3/4W;�200PPM;1R;�10% RoHS : Compliant | 0 | |||
| SWCR2010-WL-1R8MT | VENKEL LTD | Surge Withstanding CR;2010;3/4W;�200PPM;1.8R;�20% RoHS : Compliant | 0 | |||
| SWCR2010-WL-5R6KT | VENKEL LTD | Surge Withstanding CR;2010;3/4W;�200PPM;5.6R;�10% RoHS : Compliant | 0 | |||
 Vyrian | 827-22-010-10-020101 | Mill-max Mfg | Board Connector | 14,748 | ||
| 929852-01-06-30 | 3m Electronic Products Division | Board Connector, 12 Contact(s), 2 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Socket | 14,329 | |||
| 7448022010 | Wurth Elektronik | Single Phase EMI Filter, 250V, 50HzHz | 13,579 | |||
| 5962-01-089-1817 | Texas Instruments | NAND Gate, TTL, CDFP16 RoHS : Not Compliant | 9,125 | |||
| 5962-01-085-9246 | Texas Instruments | Standard SRAM, 256X4, 450ns, MOS, PDIP22 | 8,387 | |||
| 5962-01-050-6942 | Texas Instruments | OTP ROM, 1KX4, 60ns, TTL, PDIP18 RoHS : Not Compliant | 7,887 | |||
| 5962-01-077-8813 | Texas Instruments | Multiplexer, 1-Func, 8 Line Input, TTL, CDIP16 RoHS : Not Compliant | 7,294 | |||
| 5962-01-092-6322 | Texas Instruments | NOR Gate, TTL, CDIP14 RoHS : Not Compliant | 7,089 | |||
| 5962-01-085-3486 | Texas Instruments | Shift Register, 8-Bit, TTL, CDIP16 RoHS : Not Compliant | 6,423 | |||
| 5962-01-012-8153 | Texas Instruments | 6,326 | ||||
| 5962-01-006-3614 | Texas Instruments | Inverter, TTL, CDIP14 RoHS : Not Compliant | 5,865 | |||
| T2010042201-000 | TE Connectivity | Rectangular Connector, 4 Contact(s), Female RoHS : Compliant | 4,492 | |||
| 5962-01-034-3873 | Texas Instruments | Shift Register, 80-Bit, MOS, PDIP16 RoHS : Not Compliant | 4,145 | |||
| BK20104S121-T | TAIYO YUDEN | Ferrite Chip, 1 Function(s), 0.1A, 8 Pin(s) RoHS : Compliant | 741 | |||
DSPIC30F2010-30I/SP | Microchip Technology Inc | Digital Signal Processor, 16-Bit Size, 0-Ext Bit, 40MHz, CMOS, PDIP28 RoHS : Compliant | 286 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
German ▼ 
English
Chinese
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand