2053FCD-R Price, Verteiler, Stock

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 36 inches. Plenum N Male to N Male Right Angle Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum N male to N male right angle low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to N male right angle low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-NM-LP type N to TC-SPP250-NM-RA-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-NM-LP N type cable connection on one end and right angle TC-SPP250-NM-RA-LP type N cable connection on the other. Our low PIM TC-250-NM-LP type N to right angle TC-SPP250-NM-RA-LP N type cable assemblies have a male gender on end 1 and male on end 2. This TC-250-NM-LP type N to TC-SPP250-NM-RA-LP type N cable is a male to male coax assembly, PE3C6205-36, can also be known as a low PIM TC-250-NM-LP N type plug to right angle TC-SPP250-NM-RA-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-250-NM-LP type N plug to TC-SPP250-NM-RA-LP N type plug cable assembly PE3C6205-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-NM-LP N cable assembly is manufactured with TC-250-NM-LP type N to right angle TC-SPP250-NM-RA-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-NM-LP type N male to TC-SPP250-NM-RA-LP type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6205-36 can also be used in the other direction and will be right angle TC-SPP250-NM-RA-LP type N male to TC-250-NM-LP N type male cable assembly if the opposite connectivity is required. Low PIM TC-250-NM-LP type N plug to TC-SPP250-NM-RA-LP N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-NM-LP type N to TC-SPP250-NM-RA-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-NM-LP N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to N male right angle low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts.

1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09

389

PE3W12053-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated N Male to SMA Male Low Loss Cable 60 Inch Length Using LMR-200-FR Coax., Radio frequency assembly fire rated N male to SMA male low loss cable 60 inch length using LMR-200-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Fire rated N male to SMA male low loss cable 60 inch length using LMR-200-FR coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low loss N type to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W12053-60 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3W12053-60 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12053-60 can also be used in the other direction and will be SMA male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to SMA male low loss cable 60 inch length using LMR-200-FR coax.

1 : $85.59
25 : $81.31
50 : $77.03
100 : $73.61

PE3W12053-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. Fire Rated N Male to SMA Male Low Loss Cable 72 Inch Length Using LMR-200-FR Coax., Radio frequency assembly fire rated N male to SMA male low loss cable 72 inch length using LMR-200-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Fire rated N male to SMA male low loss cable 72 inch length using LMR-200-FR coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low loss type N to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W12053-72 can also be known as a low loss N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3W12053-72 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12053-72 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to SMA male low loss cable 72 inch length using LMR-200-FR coax.

1 : $86.69
25 : $82.36
50 : $78.02
100 : $74.55

PE3W12053-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated N Male to SMA Male Low Loss Cable 48 Inch Length Using LMR-200-FR Coax., Radio frequency assembly fire rated N male to SMA male low loss cable 48 inch length using LMR-200-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Fire rated N male to SMA male low loss cable 48 inch length using LMR-200-FR coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low loss type N to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W12053-48 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3W12053-48 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12053-48 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to SMA male low loss cable 48 inch length using LMR-200-FR coax.

1 : $82.39
25 : $78.27
50 : $74.15
100 : $70.86

PE2205-30

Pasternack Enterprises

Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Design: Coupler, Minimum Frequency: 7 GHz, Maximum Frequency: 12.4 GHz, Maximum Input Power: 50 Watt, Coupling Value: 30 dB. Directional 30 dB SMA Coupler From 7 GHz to 12.4 GHz Rated To 50 Watts. RF coupler part number PE2205-30 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 7 GHz and a maximum frequency of 12.4 GHz. Directional coupler part # PE2205-30 is constructed with a coupling value of 30 dB and a coupler directivity of 17 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.3 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.3 dB and a maximum VSWR of 1.3. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2205-30 directional 30 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $968.99
10 : $930.23
25 : $891.47

PE3205-36

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 36 inches. 7/16 DIN Male to 7/16 DIN Male Cable 36 Inch Length Using RG393 Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 36 inch length using RG393 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 36 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3205-36, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3205-36 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7.5 GHz maximum frequency 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 36 inch length using RG393 coax.

1 : $299.99
25 : $284.99
50 : $269.99

PE3W20530

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to 4.3-10 Male Cable Using LMR-240-FR Coax. PE3W20530 is a SMA female bulkhead to 4.3-10 male cable using LMR-240-FR coax. This Pasternack SMA female bulkhead to 4.3-10 male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our female SMA bulkhead to male 4.3-10 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20530 SMA female bulkhead to 4.3-10 male cable assembly is constructed with LMR-240-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C2053/HS

Pasternack Enterprises

PE3W02053

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. N Female Bulkhead to BNC Male Cable Using PE-C100-LSZH Coax. PE3W02053 is a N female bulkhead to BNC male cable using PE-C100-LSZH coax. This Pasternack N female bulkhead to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our female N bulkhead to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02053 N female bulkhead to BNC male cable assembly is constructed with PE-C100-LSZH coax.

PE3W20535

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm. 2.92mm Male Right Angle to SMA Female Bulkhead Cable Using PE-P047 Coax. PE3W20535 is a 2.92mm male right angle to SMA female bulkhead cable using PE-P047 coax. This Pasternack 2.92mm male right angle to SMA female bulkhead cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMA for connector 2. 2.92mm right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 2.92mm right angle to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20535 2.92mm male right angle to SMA female bulkhead cable assembly is constructed with PE-P047 coax.

PE34205-36

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Male Right Angle Cable 36 Inch Length Using RG174 Coax., Radio frequency assembly N male to N male right angle cable 36 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable 36 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our N type to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE34205-36, can also be known as a type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE34205-36 is built with RG174 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34205-36 can also be used in the other direction and will be right angle type N male to N type male cable assembly if the opposite connectivity is required. Type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 36 inch length using RG174 coax.

1 : $101.99
25 : $96.89
50 : $91.79
100 : $87.71

PE3W20537/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Water Blue FAKRA Jack to BNC Male Cable Using LMR-100A-UF Coax with HeatShrink. PE3W20537/HS is a FAKRA jack to BNC male cable using LMR-100A-UF coax. This Pasternack FAKRA jack to BNC male cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm BNC for connector 2. Our jack FAKRA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20537/HS FAKRA jack to BNC male cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20539LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Cable Using PE-SR405AL Coax with HeatShrink, LF Solder. PE3W20539LF/HS is a SMA male to SMA male right angle cable using PE-SR405AL coax. This Pasternack SMA male to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20539LF/HS SMA male to SMA male right angle cable assembly is constructed with PE-SR405AL coax.

PE3W00205-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to N Male Cable 36 Inch Length Using RG223 Coax., Radio frequency assembly SMA male right angle to N male cable 36 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to N male cable 36 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and type N cable connection on the other. Our right angle SMA to N type cable assembly has male gender on end 1 and male on end 2. PE3W00205-36 can also be known as a right angle SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to type N plug cable assembly PE3W00205-36 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W00205-36 RF cable are available on our downloadable PDF datasheet.PE3W00205-36 can also be used in the other direction and will be type N male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $106.99
25 : $101.64
50 : $96.29
100 : $92.01

PE3W20533

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. MMCX Plug to BNC Female 4 Hole Flange Cable Using RG188-DS Coax. PE3W20533 is a MMCX plug to BNC female 4 hole flange cable using RG188-DS coax. This Pasternack MMCX plug to BNC female 4 hole flange cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm BNC for connector 2. Our plug MMCX to female BNC 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20533 MMCX plug to BNC female 4 hole flange cable assembly is constructed with RG188-DS coax.

TE Connectivity

172053-2

TE Connectivity

MTEI CONN 2P REC ASSY Number of Positions: 2 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Retention: With Termination Method to Wire & Cable: Insulation Displacement (IDC) Standard Rectangular Connector | 2 Receptacle Connector Assembly With | Part Number: 172053-2 | Internal Number: 172053-2 | TE Connectivity
RoHS : Compliant

1,000 : $1.51
500 : $1.56
250 : $1.6
100 : $1.66
50 : $1.71
1 : $1.87

15,982

M902-2053

TE Connectivity

COMP NUT, 6/9/24SZ,CBL SZ .430-.570,HD10 Connector Backshell Product Type: Backshell Primary Product Material: PBT Number of Positions: 19 47 18 7 9 16 14 21 35 33 23 29 31 Sealable: No Operating Temperature Range: -40 – 273 °F Backshell PBT 19 | Deutsch Hd10 Backshell | Part Number: M902-2053 | Internal Number: M902-2053 | TE Connectivity
RoHS : Compliant

1 : $1.87

14,792

2-32053-1

TE Connectivity

PIDG SPD 22-16 COMM 22-18MIL 8 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: M4 #8 Spade Tongue Terminal 22 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Spade Tongue Terminal | Part Number: 2-32053-1 | Internal Number: 2-32053-1 | TE Connectivity
RoHS : Compliant

10,000 : $0.69
5,000 : $0.71
2,500 : $0.72
1,000 : $0.74
500 : $0.75
250 : $0.77
100 : $0.78
50 : $0.8
25 : $0.81
10 : $0.83
1 : $0.84

12,306

2238205-3

TE Connectivity

250 FASTON,FLAG,REC.,22-16 AWG,PTBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 22 – 16 AWG Wire Size: .4 – 1.3 mm² Wire Size: 700 – 2600 CMA Receptacle Uninsulated 22 – 16 AWG .4 – 1.3 mm² | Quick Disconnect | Part Number: 2238205-3 | Internal Number: 2238205-3 | TE Connectivity
RoHS : Compliant

2,500 : $0.11
1,000 : $0.13
500 : $0.14
250 : $0.14
100 : $0.16
50 : $0.18
25 : $0.2
10 : $0.23
1 : $0.31

10,178

32053

TE Connectivity

PIDG SPD 22-16 COMM 22-18MIL 8 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: #8 M4 Spade Tongue Terminal 22 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Spade Tongue Terminal | Part Number: 32053 | Internal Number: 32053 | Alias Number: 126360-000 | TE Connectivity
RoHS : Compliant

2,500 : $0.85
1,000 : $0.88
500 : $0.9
250 : $0.92
100 : $0.94
50 : $0.97
25 : $0.99
10 : $1.01
1 : $1.04

1,788

5120534-1

TE Connectivity

1FHP,64,30A/S,N,C,S10,12,13,15 PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 64 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5120534-1 | Internal Number: 5120534-1 | TE Connectivity
RoHS : Compliant

1,000 : $7.47
500 : $7.68
250 : $7.92
100 : $8.18
50 : $8.42
1 : $9.24

177

8-32053-1

TE Connectivity

PIDG SPD 22-16 COMM 22-18MIL 8 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: M4 #8 Spade Tongue Terminal 22 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Spade Tongue Terminal | Part Number: 8-32053-1 | Internal Number: 8-32053-1 | Alias Number: AMPS-8-0032053-1 | TE Connectivity
RoHS : Compliant

500 : $1.51
250 : $1.56
100 : $1.61
50 : $1.66
25 : $1.71
10 : $1.77
1 : $1.82

131

Venkel Ltd.

PWCR0603-QK-2053DT

VENKEL LTD

Pulse Withstanding CR;0603;1/10W;�100PPM;205K;�0.5%
RoHS : Compliant

HPTF1206-TN-2053FT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�10PPM;205K ;�1%
RoHS : Compliant

TFCR0805-10W-C-2053DT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;205K ;�0.5%
RoHS : Compliant

TFCR1206-8W-K-2053DT

VENKEL LTD

Thin Film CR;1206;1/8W;�100PPM;205K ;�0.5%
RoHS : Compliant

TFCR1210-4W-C-2053BT-1K

VENKEL LTD

Thin Film CR;1210;1/4W;�50PPM;205K ;�0.1%
RoHS : Compliant

TFCR2010-4W-K-2053BT

VENKEL LTD

Thin Film CR;2010;1/4W;�100PPM;205K ;�0.1%
RoHS : Compliant

UPTF0603-16W-N-2053DT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;205K ;�0.5%
RoHS : Compliant

CR2010-1W-2053FT

VENKEL LTD

Chip Resistor;2010;1W;205K;�1%
RoHS : Compliant

CRS0805-8W-2053FT

VENKEL LTD

Anti-Sulfuration CR;0805;1/8W;205K ;�1%
RoHS : Compliant

PWCR1206-VK-2053DT

VENKEL LTD

Pulse Withstanding CR;1206;1/2W;�100PPM;205K;�0.5%
RoHS : Compliant

PWCR1206-WK-2053FT

VENKEL LTD

Pulse Withstanding CR;1206;3/4W;�100PPM;205K;�1%
RoHS : Compliant

UPTF1206-8W-E-2053AT

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;25PPM;205K ;�0.05%
RoHS : Compliant

TFCR0402-16W-K-2053FT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�100PPM;205K ;�1%
RoHS : Compliant

TFCR0603-10W-E-2053DT

VENKEL LTD

Thin Film CR;0603;1/10W;�25PPM;205K;�0.5%
RoHS : Compliant

TFCR1206-8W-E-2053FT-1K

VENKEL LTD

Thin Film CR;1206;1/8W;�25PPM;205K ;�1%
RoHS : Compliant

Vyrian

MAL205356102E3

Vishay Intertechnologies

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 400V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount
RoHS : Compliant

18,000

5120534-2

TE Connectivity

Board Stacking Connector, 84 Contact(s), 2 Row(s), Male, Straight, 0.039 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Plug
RoHS : Compliant

11,486

LTC2053HDD#PBF

Analog Devices Inc

Instrumentation Amplifier, 1 Func, 20uV Offset-Max, 0.2MHz Band Width, CMOS, PDSO8
RoHS : Compliant

10,347

MCR03ERTF2053

ROHM Semiconductor

Fixed Resistor, Metal Glaze/thick Film, 0.1W, 205000ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0603
RoHS : Compliant

9,822

TPS2053BEVM-294

Texas Instruments

9,583

BQ2053FSN

Texas Instruments

9,551

LTC2053HMS8#PBF

Analog Devices Inc

Instrumentation Amplifier, 1 Func, 20uV Offset-Max, 0.2MHz Band Width, CMOS, PDSO8
RoHS : Compliant

8,954

LTC2053HMS8-TRPBF

Analog Devices Inc

6,495

D62053FN

Texas Instruments

5,288

CT205332

Micron Technology, Inc

5,211

BQ2053DSN

Texas Instruments

3,578

CS5205-3GDPR3

onsemi

Fixed Positive LDO Regulator, 3.3V, 1.3V Dropout, BIPolar, PSSO3
RoHS : Not Compliant

3,500

74547-2053

Molex

Interconnection Device
RoHS : Compliant

883

LTC2053IMS8-SYNC

Linear Technology

Instrumentation Amplifier, 1 Func, 20uV Offset-Max, PDSO8
RoHS : Not Compliant

721

25.160.2053.0

Wieland Electric

Strip Terminal Block, 30A, 1 Row(s), 1 Deck(s)

220

Waytek, Inc.

2053

Heyco

Heyco 2053 snap bushing is a nylon panel bushing sized for a .500" mounting hole to protect wire and cable as it passes through sheet metal or panel openings. Its snap-in design supports quick installation, abrasion protection, and cleaner wire routing in electrical and equipment applications.

100 : $0.0796
200 : $0.0736
500 : $0.0668
1,000 : $0.0618
5,000 : $0.0591

11,580

986332053

The Bosch Group

Mini Relay, CHange Over, 5-Pin SPDT, 30NO, 20NC, 12VDC w/Resistor | Like 75414

1 : $17.7937
5 : $16.0363
10 : $14.7182
50 : $14.2057
100 : $13.7663
200 : $13.327

Win Source Electronics

BU52053NVX-TR

ROHM Semiconductor

MAGNETIC SWITCH OMNIPOLAR 4SS0N
RoHS : Compliant

340 : $0.8825
255 : $0.9843
200 : $1.0182
145 : $1.0522
95 : $1.0861
40 : $1.3237

145,000

MIC5205-3.3YM5TR

Micrel Inc

1,445 : $0.2078
1,080 : $0.2318
835 : $0.2398
610 : $0.2478
395 : $0.2558
165 : $0.3117

109,770

DMC2053UVT-7

Diodes Incorporated

MOSFET BVDSS: 8V-24V TSOT26 T&R
RoHS : Compliant

405 : $0.7455
325 : $0.7758
250 : $0.8061
175 : $0.8667
115 : $0.897
55 : $0.9576

102,000

AP2205-33W5-7

Diodes Incorporated

IC REG LINEAR 3.3V 250MA SOT25 / Linear Voltage Regulator IC Positive Fixed 1 Output 250mA SOT-25
RoHS : Compliant

1,270 : $0.2364
950 : $0.2637
735 : $0.2728
535 : $0.2819
345 : $0.291
145 : $0.3546

15,000

MPXM2053GST1

Nexperia

SENS PRESSURE 7.25 PSI MAX MPAK

47 : $6.4737
38 : $6.7369
29 : $7.0001
20 : $7.5264
13 : $7.7895
7 : $8.3158

5,260

LTC2053IMS8

Linear Technology

Precision, Rail-to-Rail Input and Output, Zero-Drift Instrumentation Amplifier with Resistor-Programmable Gain
RoHS : Not Compliant

26 : $11.8182
19 : $13.1819
15 : $13.6364
11 : $14.091
7 : $14.5455
3 : $17.7273

5,000

LTC2053HMS8

Linear Technology

Precision, Rail-to-Rail Input and Output, Zero-Drift Instrumentation Amplifier with Resistor-Programmable Gain | IC OPAMP CHOPPER 1 CIRCUIT 8MSOP
RoHS : Not Compliant

23 : $14.9883
17 : $16.7177
13 : $17.2941
10 : $17.8706
7 : $18.4471
3 : $22.4823

5,000

LTC2053HMS8#TRPBF

Linear Technology

IC OPAMP CHOPPER 200KHZ 8MSOP
RoHS : Compliant

28 : $10.9642
21 : $12.2293
16 : $12.651
12 : $13.0727
8 : $13.4944
4 : $16.4463

4,760

LTC2053IMS8#PBF

Linear Technology

IC OPAMP CHOPPER 200KHZ 8MSOP
RoHS : Compliant

26 : $11.8182
19 : $13.1819
15 : $13.6364
11 : $14.091
7 : $14.5455
3 : $17.7273

4,740