| Datenblatt-Suchmaschine für elektronische Bauteile |
|
206HG-15AF5-R Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
![]() Avnet Americas | LI1206H151R-10 | Qnity Laird | - Tape and Reel (Alt: LI1206H151R-10) RoHS : Compliant |
| 12,000 | |
| F1206HI2000V063TM | AEM Inc | - Tape and Reel (Alt: F1206HI2000V063TM) RoHS : Not Compliant |
| 6,000 | ||
| F1206HI3500V032TM | AEM Inc | - Tape and Reel (Alt: F1206HI3500V032TM) RoHS : Not Compliant |
| 6,000 | ||
| SF-1206HV15M-2 | Bourns Inc | SMD Fuse, High Inrush Current Withstand, 15 A, 35 VDC, 1206 [3216 Metric], SF-1206HV-M - Tape and Reel (Alt: SF-1206HV15M-2) RoHS : Not Compliant |
| 6,000 | ||
| F1206HI4500V032TM | AEM Inc | - Tape and Reel (Alt: F1206HI4500V032TM) RoHS : Not Compliant |
| 6,000 | ||
| F1206HI7000V024TM | AEM Inc | - Tape and Reel (Alt: F1206HI7000V024TM) RoHS : Not Compliant |
| 6,000 | ||
| F1206HI1500V063TM | AEM Inc | - Tape and Reel (Alt: F1206HI1500V063TM) RoHS : Not Compliant |
| 6,000 | ||
| 67996-206HLF | Amphenol Corporation | Pin Header, Board-to-Board, 2.54 mm, 2 Rows, 6 Contacts, Through Hole, FCI BergStik 67996 - Bag (Alt: 67996-206HLF) RoHS : Compliant |
| 5,600 | ||
| F1206HC15A0TM | AEM Inc | Fuse, Surface Mount, 15 A, High Current, 35 V, 1206 [3216 Metric], SolidMatrix HC Series - Tape and Reel (Alt: F1206HC15A0TM) RoHS : Not Compliant |
| 3,000 | ||
| F1206HI4000V032TM | AEM Inc | - Tape and Reel (Alt: F1206HI4000V032TM) RoHS : Not Compliant |
| 3,000 | ||
| F1206HC25A0TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 25 A, 35 VDC, 1206 [3216 Metric], SolidMatrix HC - Tape and Reel (Alt: F1206HC25A0TM) RoHS : Not Compliant |
| 3,000 | ||
| F1206HA20V024TM | AEM Inc | - Tape and Reel (Alt: F1206HA20V024TM) RoHS : Not Compliant |
| 3,000 | ||
| 67997-206HLF | Amphenol Corporation | - Bag (Alt: 67997-206HLF) RoHS : Compliant |
| 1,600 | ||
| TMMH-142-06-H-D | Samtec Inc | Pin Header, Board-to-Board, 2 Rows, 84 Contacts, Through Hole, TMMH Series, Unshrouded, Straight - Bulk (Alt: TMMH-142-06-H-D) RoHS : Compliant |
| 6 | ||
| 390AS001NF1206H4 | Glenair Inc | - Bulk (Alt: 390AS001NF1206H4) RoHS : Not Compliant |
| 4 | ||
![]() Newark | SF-1206HV10M-2 | Bourns Inc | Fuse, 10A, High Inrush Withstand, 1206; |Bourns, Inc. SF-1206HV10M-2 RoHS : Compliant |
| 2,919 | |
| SF-1206HV10M-2 | Bourns Inc | Fuse, 10A, High Inrush Withstand, 1206; |Bourns, Inc. SF-1206HV10M-2 RoHS : Compliant |
| 2,919 | ||
| QF1206H3A00T | AEM Inc | Automotive Fuse, Slow Blow, 3A, 32Vdc; |Aem QF1206H3A00T RoHS : Compliant |
| 2,845 | ||
| QF1206H3A00T | AEM Inc | Automotive Fuse, Slow Blow, 3A, 32Vdc; |Aem QF1206H3A00T RoHS : Compliant |
| 2,845 | ||
| F1206HI3500V032TM | AEM Inc | Fuse, High Inrush, 3.5A, 32Vdc, 1206; |Aem F1206HI3500V032TM RoHS : Compliant |
| 2,545 | ||
| F1206HI3500V032TM | AEM Inc | Fuse, High Inrush, 3.5A, 32Vdc, 1206; |Aem F1206HI3500V032TM RoHS : Compliant |
| 2,545 | ||
| SF-1206HV10M-2 | Bourns Inc | Fuse, 10A, High Inrush Withstand, 1206; |Bourns, Inc. SF-1206HV10M-2 RoHS : Compliant |
| 2,440 | ||
| SF-1206HV10M-2 | Bourns Inc | Fuse, 10A, High Inrush Withstand, 1206; |Bourns, Inc. SF-1206HV10M-2 RoHS : Compliant |
| 2,440 | ||
| F1206HC15A0TM | AEM Inc | Fuse, High Current, 15A, 35Vdc, 1206; |Aem F1206HC15A0TM RoHS : Compliant |
| 1,895 | ||
| C1206H821J5GACT500 | KEMET Corporation | Capacitor, 820Pf, C0G/Np0, 50V, 1206; |Kemet C1206H821J5GACT500 RoHS : Compliant |
| 465 | ||
| C1206H821J5GACT500 | KEMET Corporation | Capacitor, 820Pf, C0G/Np0, 50V, 1206; |Kemet C1206H821J5GACT500 RoHS : Compliant |
| 465 | ||
C1206H161J2GACT500![]() | KEMET Corporation | Capacitor, 160Pf, C0G/Np0, 200V, 1206; |Kemet C1206H161J2GACT500 RoHS : Compliant |
| 424 | ||
C1206H161J2GACT500![]() | KEMET Corporation | Capacitor, 160Pf, C0G/Np0, 200V, 1206; |Kemet C1206H161J2GACT500 RoHS : Compliant |
| 424 | ||
| F1206HI2000V063TM | AEM Inc | Fuse, High Inrush, 2A, 63Vdc, 1206; |Aem F1206HI2000V063TM RoHS : Compliant |
| 36 | ||
| F1206HI2000V063TM | AEM Inc | Fuse, High Inrush, 2A, 63Vdc, 1206; |Aem F1206HI2000V063TM RoHS : Compliant |
| 36 | ||
![]() RS | FN9244EB-12-06HI | TE Connectivity | 12 AMP EXCELLENT PERFORMANCE IEC INLET FILTER WITH EARTH LINE CHOKE RoHS : Compliant |
| 120 | |
| FN9222B-12-06HI (801847) | TE Connectivity | IEC INLET, 1-PH, MEDICAL, 12A, FAST-ON, HOT INLET, NO RESISTOR, FN 9222 SERIES |
| 90 | ||
| V5.5MLA1206H | Littelfuse Inc | ML SERIES 9.3V 150A 0.4J 17.5V CLAMP 1206 CERAMIC TRANSIENT VOLTAGE SUPPRESSOR RoHS : Compliant |
| 23 | ||
| 5SJ4120-6HG40 | Siemens | CIRCUIT BREAKER 1 P 20A C CURVE DIN RAIL MOUNT UL489 TYPE HSJ 240VAC/60VDC RoHS : Compliant |
| 2 | ||
| P206-HA (PER.P206-HA) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 2 | ||
| WB19-0206H | Quest Technology International Inc | RACK, OPEN, WALL MOUNT, SWING FRAME,19 IN,2U/3.5IN, BLACK,15 LB CAP, STEEL, WB SERIES |
| 1 | ||
| F-206-H (PER.F206-HT) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| FX-206-H (PER.FX206-HA) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| FT-206-H (PER.CFT206-HA) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| LP-206-HA (PER.LP206-HA) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| PW-206-HA (PER.PW206-HA) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| F3X-206-H (PER.F3X206-HB) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| PAS-206-HT (PER.PAS206-HT) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| T-206-H-17/32 (PER.T206-HA) | PEER Bearing Company | PEER MOUNTED AGRICULTURE (MA) |
| 0 | ||
| FT-206-H-PBT (PER.TFT206-HA) | PEER Bearing Company | PEER MOUNTED AGRICULTURE (MA) |
| 0 | ||
![]() Microchip Technology Inc | DSPIC33CDV256MP206-H/M9VAO | Microchip Technology Inc | dsPIC33C 100MHz, 256K Flash, 24K RAM, 3-Phase FET Driver, LDO, 64-Pin, VGQFN, Projected EOL: 2051-07-14 RoHS : Compliant |
| 1,800 | |
| DSPIC33CH512MP206-H/PT | Microchip Technology Inc | dsPIC33 100MHz Dual Core, 64-Pin, 512KB Flash, TQFP, Projected EOL: 2045-11-27 RoHS : Compliant |
| 1,479 | ||
| DSPIC33CDV128MP206-H/M9VAO | Microchip Technology Inc | dsPIC33C 100MHz, 128K Flash, 24K RAM, 3-Phase FET Driver, LDO, 64-Pin, VGQFN, Projected EOL: 2051-09-04 RoHS : Compliant |
| 1,270 | ||
PIC24EP512GP206-H/PT![]() | Microchip Technology Inc | 70MIPS, 512KB Flash, 48KB RAM, OpAmps, PTG, 64-pins, up to 150C, TQFP, Projected EOL: 2040-11-13 RoHS : Compliant |
| 320 | ||
| PIC24EP128MC206-H/PT | Microchip Technology Inc | 16 Bit MCU, 128KB Flash, 16KB RAM, 60MHz, 64Pin, MCPWM,QEI, 3 OpAmp, 4 Comp, PTG, TQFP, Projected EOL: 2041-07-20 RoHS : Compliant |
| 0 | ||
| DSPIC33CK64MP206-H/PT | Microchip Technology Inc | dsPIC33C 100MHz, 64K Dual Panel Flash, 8K RAM, OpAmps, 12bit ADCs, PWM, TQFP, Projected EOL: 2045-11-28 RoHS : Compliant |
| 0 | ||
| DSPIC33CH64MP206-H/PT | Microchip Technology Inc | dsPIC33 100MHz Dual Core, 64-Pin 64KB Flash, TQFP, Projected EOL: 2046-10-07 RoHS : Compliant |
| 0 | ||
| DSPIC33CK128MP206-H/MR | Microchip Technology Inc | dsPIC33C 100MHz, 128K Dual Panel Flash, 16K RAM, OpAmps, 12bit ADCs, PWM, QFN, Projected EOL: 2045-11-28 RoHS : Compliant |
| 0 | ||
| DSPIC33CK256MP206-H/PT | Microchip Technology Inc | dsPIC33C 100MHz, 256K Dual Panel Flash, 24K RAM, OpAmps, 12bit ADCs, PWM, TQFP, Projected EOL: 2045-11-28 RoHS : Compliant |
| 0 | ||
| DSPIC33CK128MP206-H/PT | Microchip Technology Inc | dsPIC33C 100MHz, 128K Dual Panel Flash, 16K RAM, OpAmps, 12bit ADCs, PWM, TQFP, Projected EOL: 2045-11-28 RoHS : Compliant |
| 0 | ||
| DSPIC33CH256MP206-H/MR | Microchip Technology Inc | dsPIC33 100MHz Dual Core, 64-Pin, 256KB Flash, QFN, Projected EOL: 2045-11-27 RoHS : Compliant |
| 0 | ||
| DSPIC33EP128MC206-H/PT | Microchip Technology Inc | 16 Bit DSC, 128KB Flash, 16KB RAM, 60MHz, 64Pin, MCPWM,QEI, 3 OpAmp, 4 Comp, PTG, TQFP, Projected EOL: 2041-07-20 - Contact for Pricing RoHS : Compliant | 0 | |||
| DSPIC33CH512MP206-H/MR | Microchip Technology Inc | dsPIC33 100MHz Dual Core, 64-Pin, 512KB Flash, QFN, Projected EOL: 2045-11-27 RoHS : Compliant |
| 0 | ||
| DSPIC33EP256MC206-H/PT | Microchip Technology Inc | 16 Bit DSC, 256KB Flash, 32KB RAM, 60MHz, 64Pin, MCPWM,QEI, 3 OpAmp, 4 Comp, PTG, TQFP, Projected EOL: 2041-03-14 RoHS : Compliant |
| 0 | ||
| DSPIC33CDV256MP206-H/M9 | Microchip Technology Inc | dsPIC33C 100MHz, 256K Flash, 24K RAM, 3-Phase FET Driver, LDO, 64-Pin, VGQFN, Projected EOL: 2051-03-01 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 0206HPP188-BO | MISC. INDUSTRIAL HRD | 10,000 | |||
| M55155/206H02 | Staffall | 200 | ||||
| NAS1352-06H12P | NAS Screws | 40 | ||||
| NAS1352-06H12P | B&B Specialties Inc | 39 | ||||
| NAS1352-06H10P | NAS Screws | 11 | ||||
| NAS1352-06H6P | B&B Specialties Inc | 5 | ||||
| NAS1352-06H4P | NAS Screws | 5 | ||||
| NAS1352-06H8P | B&B Specialties Inc | 5 | ||||
![]() Rochester Electronics | PT78NR206H | Texas Instruments | Switching Regulator, Voltage-mode, 700kHz Switching Freq-Max, Hybrid RoHS : Compliant |
| 22 | |
| V18MLA1206H23 | Harris Semiconductor | Varistor, 0.4J, Surface Mount RoHS : Not Compliant |
| 222 | ||
![]() Sager | CUFBPR5206HBB1 | Panduit Corp | Wire Ducting & Raceways 52 RU Blanking Panel, Black RoHS : Compliant |
| 0 | |
| CW1K-3DE20-6H | IDEC Corporation | Keylock Switches KeySelectorSW 22MM 3position |
| 0 | ||
| CW4K-3EE20-6H | IDEC Corporation | Keylock Switches KeySelectorSW 22MM 3position |
| 0 | ||
| TW-02-06-H-D-605-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-12-06-H-D-485-SM-A-P | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
| TW-12-06-H-D-315-164 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TLW-122-06-H-S-LL | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| FN9233E-12-06HI | TE Connectivity | AC Power Entry Modules 12A Flange Hot Inlet W/Earth Line Choke RoHS : Compliant |
| 0 | ||
| FN9244EB-12-06HI | TE Connectivity | AC Power Entry Modules 12A IEC INLET FILTER PERFORM W/CHOKE MED RoHS : Compliant |
| 0 | ||
| FN9244U-12-06HI | TE Connectivity | AC Power Entry Modules 12A HI-PERFORM WIDER MOUNT FLANGES RoHS : Compliant |
| 0 | ||
| CUFBPR4206HBW1 | Panduit Corp | Wire Ducting & Raceways 42 RU Blanking Panel, White RoHS : Compliant |
| 0 | ||
| CW4K-3GE20-6H | IDEC Corporation | Keylock Switches KeySelectorSW 22MM 3position |
| 0 | ||
| TLW-112-06-H-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TLW-122-06-H-S | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TW-12-06-H-D-605-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() TME | PCF1206H-02-22R6DI | TT Electronics plc | Resistor: thin film; 22.6Ω; 3.05x1.55mm |
| 25,000 | |
| PCF1206H-02-825RDI | TT Electronics plc | Resistor: thin film; 825Ω; 3.05x1.55mm |
| 5,000 | ||
| 68000-206HLF | Amphenol Communications Solutions | Connector: pin strips; pin header; male; data; PIN: 6; THT; straight RoHS : Compliant |
| 4,333 | ||
| 78548-206HLF | Amphenol Corporation | Connector: pin strips; pin header; male; data; PIN: 6; soldering |
| 2,653 | ||
| 78208-206HLF | Amphenol Corporation | Connector: wire-board; male; data; PIN: 6; shrouded; 2.54mm; angled |
| 2,000 | ||
| 67996-206HLF | Amphenol Communications Solutions | Connector: pin strips; pin header; male; data; PIN: 6; THT; straight RoHS : Compliant |
| 1,767 | ||
| 68016-206HLF | Amphenol Corporation | Connector: pin strips; pin header; male; data; soldering; 3A |
| 200 | ||
| E72-06H-4-01 | Gloso Tech Inc | Fuse: fuse; automotive; 6A; 14VDC |
| 100 | ||
| 67997-206HLF | Amphenol Communications Solutions | Connector: pin strips; pin header; male; data; PIN: 6; THT; straight RoHS : Compliant |
| 9 | ||
| UCFL 206/H SKF | SKF | Bearing: rolling; bearing unit; 30mm; bearing steel |
| 1 | ||
| 103206HV | KING TONY | Interchangeable blade; for socket |
| 0 | ||
| 712-00206 HELATAPE TEX | HellermannTyton | Tape: textile; W: 19mm; L: 10m; Thk: 0.31mm; grey; 64N/cm; 10%; cotton |
| 0 | ||
| ADW1206HLW | Panasonic Electronic Components | Relay: electromagnetic; Ucoil: 6VDC; SPST-NO; Icontacts max: 16A |
| 0 | ||
| ADW1206HTW | Panasonic Electronic Components | Relay: electromagnetic; Ucoil: 6VDC; SPST-NO; Icontacts max: 16A RoHS : Compliant |
| 0 | ||
| DTS-20/22/0,6-H | Feryster | Inductor: wire; THT; 600mA; R: 280mΩ; -20÷50%; DTS-20; horizontal |
| 0 | ||
![]() Ameya Holding Limited | BH76206HFV-TR![]() | ROHM Semiconductor | Compact, Low Current consumption Single Output Video Drivers RoHS : Compliant |
| 300 | |
![]() ComSIT USA | V33MLA1206H | Littelfuse Inc | MULTILAYER TRANSIENT VOLTAGE SURGE SUPPRESSOR Varistor, 33V, 0.8J, Surface Mount RoHS : Compliant | 100,000 | ||
| V42MLA1206H | Littelfuse Inc | Varistor RoHS : Compliant | 60,000 | |||
| LI1206H121R10 | Qnity Laird | Ferrite Chip, 1 Function(s), 0.8A, 2 Pin(s) RoHS : Compliant | 27,202 | |||
| V14MLA1206H | Littelfuse Inc | MULTILAYER TRANSIENT VOLTAGE SURGE SUPPRESSOR Varistor, 14V, 0.05J, Surface Mount RoHS : Compliant | 17,500 | |||
| VJ1206H333KXABE31 | Vishay Intertechnologies | SURFACE MOUNT MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 10% +Tol, 10% -Tol, X8R, 15% TC, 0.033uF, Surface Mount, 1206 RoHS : Compliant | 6,000 | |||
| V56MLA1206H | Littelfuse Inc | MULTILAYER TRANSIENT VOLTAGE SURGE SUPPRESSOR Varistor, 56V, 1J, Surface Mount RoHS : Compliant | 2,500 | |||
| V68MLA1206H | Littelfuse Inc | SURFACE MOUNT MULTILAYER VARISTOR Varistor, 68V, 1J, Surface Mount RoHS : Compliant | 1,630 | |||
![]() Interstate Connecting Components | 67996-206HLF | Amphenol FCi | B/S II SR RoHS : Compliant |
| 51 | |
| 231-206-HSNF15-35PN | Glenair Inc | S9 38999 RECP 37#22D PIN | 0 | |||
| 231-206-HSNF17-6PN | Glenair Inc | S9 38999 RECP 6#12 PIN | 0 | |||
| BV008SRL36206HN | Amphenol PCD | backshell | 0 | |||
| 380AS105NF1206H4 | Glenair Inc | EMI BACKSHELL STRAIGHT SELF-LOCKING | 0 | |||
| 360FA002NF1206H | Glenair Inc | NON-ENVIRONMENTAL BS 90 DEG W STRAIN RELIEF | 0 | |||
| 290WS004Z1-1206H3 | Glenair Inc | GEO-MARINE ADAPTER/COVERS RoHS : Compliant | 0 | |||
| BE005SRL36206HN | Amphenol PCD | BACKSHELL | 0 | |||
| 390AS005NF1206H6 | Glenair Inc | 5015 EMI BS STR SZ12 Al/Cad | 0 | |||
| 380AB115B1206H | Glenair Inc | EMI/RFI NON-ENVIRO BS 45 DEG W STRAIN RELIEF RoHS : Not Compliant |
| 0 | ||
| 390DA002B1206H | Glenair Inc | 26482 sI EMI BS 90 DEG SZ12 CAD OD RoHS : Not Compliant |
| 0 | ||
| 68020-206HLF | Amphenol FCi | BERGSTIK II SR RIGHT-ANGLE RoHS : Compliant |
| 0 | ||
| 390FA001N1206H | Glenair Inc | 38999 sI&II EMI BS 90 DEG SZ12or13 CAD/eNi RoHS : Not Compliant |
| 0 | ||
| 78208-206HLF | Amphenol FCi | DFL-78208-206HLF RoHS : Compliant | 0 | |||
| 69167-206HLF | Amphenol FCi | FRICTION LATCH HDR-69167-206HL RoHS : Compliant | 0 | |||
![]() PEI Genesis | 71-533722-06H | Amphenol Corporation |
| 520 | ||
| 75-068232-06H | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 79257-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 13,453 | |
| 68001-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 5,972 | ||
| 68691-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 3,982 | ||
| 67997-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 2,996 | ||
| 78548-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 1,751 | ||
| 78208-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 1,320 | ||
| 68602-206HLF | Amphenol FCi | Cable Assembly |
| 336 | ||
| 68002-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 300 | ||
| 68020-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 273 | ||
| 68016-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 132 | ||
| 69190-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 66 | ||
| 67996-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 42 | ||
| AT206H | NKK Switches | LW ILLUM ROCKER BEZEL |
| 25 | ||
| M85049/142-06HU | Glenair Inc | SHRINK BOOTS - SHAPE MEMORY PRODUCTS RoHS : Compliant |
| 15 | ||
| 443DJ010NF1206-HK | Glenair Inc | ACCESSORIES - BANDING/CRIMP ADAPTER |
| 3 | ||
![]() PUI | 4172-06HB | 1,000 | ||||
![]() Richardson RFPD | LPF1206HP0512LTT | Kyocera AVX Components | High Performance Low Pass Filter RoHS : Compliant | 0 | ||
| 206H-034-00001N | Winchester Interconnect | IN SERIES ADAPTER RoHS : Compliant | 0 | |||
| MPP4204-206-HS | Microchip Technology Inc | Diode PIN Switch 25V 2-Pin Case 206 T/R RoHS : Compliant | 0 | |||
| H141206HLL | Amphenol PCTEL | ANTENNA UNIT RoHS : Compliant | 0 | |||
| FCP1206H472J-H1 | Knowles CDE | Cap Film 0.0047uF 50V PPS 5% (3.2 X 1.6 X 0.9mm) S RoHS : Compliant |
| 0 | ||
| FCP1206H682J-H1 | Knowles CDE | Cap Film 0.0068uF 50V PPS 5% (3.2 X 1.6 X 0.9mm) S RoHS : Compliant |
| 0 | ||
| FCP1206H332G-H1 | Knowles CDE | Cap Film 0.0033uF 50V PPS 2% (3.2 X 1.6 X 0.9mm) S RoHS : Compliant |
| 0 | ||
| MPP4201-206-HS | Microchip Technology Inc | Diode PIN Attenuator/Switch 70V 2-Pin Case 206 T/R RoHS : Compliant | 0 | |||
ADXL206HDZ![]() | Analog Devices Inc | Accelerometer Dual ±5g 5V 296mV/g to 328mV/g 8-Pin RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | SF-1206HV10M-2 | Bourns Inc | INSTOCK RoHS : Compliant | 19,500 | ||
| SF-1206HIA200M-2 | Bourns Inc | INSTOCK RoHS : Compliant | 15,600 | |||
| P1206H8661FB | Vishay Intertechnologies | INSTOCK RoHS : Not Compliant | 6,500 | |||
| V56MLA1206H | Littelfuse Inc | INSTOCK RoHS : Compliant | 4,927 | |||
| V68MLA1206H | Littelfuse Inc | INSTOCK RoHS : Compliant | 4,000 | |||
| P1206H8661FB | INSTOCK | 3,500 | ||||
| V5.5MLA1206H | INSTOCK | 2,450 | ||||
| SAA7206H/C2 | INSTOCK | 2,374 | ||||
| CC1206HNPO470J | TDK Corporation | INSTOCK | 2,000 | |||
| V14MLA1206H | Littelfuse Inc | INSTOCK RoHS : Compliant | 2,000 | |||
| V68MLA1206H | INSTOCK | 2,000 | ||||
| FCP1206H103JH2 | INSTOCK | 1,396 | ||||
| 30D206H050DC3AD3357 | Barker Microfarads (BMI) | INSTOCK | 625 | |||
| SF-1206HI075M-2 | Bourns Inc | INSTOCK RoHS : Compliant | 211 | |||
| V26MLA1206H | INSTOCK | 100 | ||||
![]() Avnet Abacus | SF-1206HIA200M-2 | Bourns Inc | - Tape and Reel (Alt: SF-1206HIA200M-2) RoHS : Compliant | 3,000 | ||
| F1206HI6000V024TM | AEM Inc | SMD Fuse High Inrush Current Withstand 6 A 24 VDC 1206 3216 Metric SolidMatrix HI (Alt: F1206HI6000V024TM) RoHS : Compliant | 3,000 | |||
| F1206HI0500V065TM | AEM Inc | SMD Fuse High Inrush Current Withstand 500 mA 65 VDC 1206 3216 Metric SolidMatrix HI - Tape and Reel (Alt: F1206HI0500V065TM) RoHS : Compliant | 3,000 | |||
| P-1206H6102BGTS | Vishay Intertechnologies | (Alt: P-1206H6102BGTS) RoHS : Compliant | 2,520 | |||
| P1206H2002DNT | Vishay Intertechnologies | - Tape and Reel (Alt: P1206H2002DNT) RoHS : Compliant | 0 | |||
| P1206H2372FBT | Vishay Intertechnologies | - Tape and Reel (Alt: P1206H2372FBT) RoHS : Not Compliant | 0 | |||
| P1206H4023FBW | Vishay Intertechnologies | - Tape and Reel (Alt: P1206H4023FBW) RoHS : Not Compliant | 0 | |||
| P1206H1332DBT | Vishay Intertechnologies | - Tape and Reel (Alt: P1206H1332DBT) RoHS : Not Compliant | 0 | |||
| P1206H1961FBT | Vishay Intertechnologies | - Tape and Reel (Alt: P1206H1961FBT) RoHS : Not Compliant | 0 | |||
| P1206H2003FNT | Vishay Intertechnologies | - Tape and Reel (Alt: P1206H2003FNT) RoHS : Compliant | 0 | |||
| P1206H3011FBT | Vishay Intertechnologies | - Tape and Reel (Alt: P1206H3011FBT) RoHS : Not Compliant | 0 | |||
| PTN1206H6191GBT1 | Vishay Intertechnologies | SMD Chip Resistor 619 kohm 2 400 mW 1206 3216 Metric Thin Film Precision PTN Series - Tape and Reel (Alt: PTN1206H6191GBT1) RoHS : Not Compliant | 0 | |||
| MCA1206HC1502FP100 | Vishay Intertechnologies | - Tape and Reel (Alt: MCA1206HC1502FP100) RoHS : Compliant | 0 | |||
| MCA1206HC2000FP100 | Vishay Intertechnologies | SMD Chip Resistor 200 Ohm 1 400 mW 1206 3216 Metric Thin Film Established Reliability - Tape and Reel (Alt: MCA1206HC2000FP100) RoHS : Compliant | 0 | |||
| MCA1206HC2211FP500 | Vishay Intertechnologies | - Tape and Reel (Alt: MCA1206HC2211FP500) RoHS : Compliant | 0 | |||
![]() Avnet Asia | F1206HI3500V032TM | AEM Inc | (Alt: F1206HI3500V032TM) RoHS : Compliant |
| 15,000 | |
| F1206HD30A0TM-NV3 | AEM Inc | (Alt: F1206HD30A0TM-NV3) RoHS : Compliant |
| 15,000 | ||
| F1206HI2500V032TM | AEM Inc | (Alt: F1206HI2500V032TM) RoHS : Compliant | 15,000 | |||
| F1206HI7000V024TM | AEM Inc | (Alt: F1206HI7000V024TM) RoHS : Compliant | 15,000 | |||
| F1206HC25A0TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 25 A, 35 VDC, 1206 [3216 Metric], SolidMatrix HC (Alt: F1206HC25A0TM) RoHS : Compliant | 12,000 | |||
| F1206HI2000V063TM | AEM Inc | (Alt: F1206HI2000V063TM) RoHS : Compliant | 3,000 | |||
| F1206HA12V024T | AEM Inc | (Alt: F1206HA12V024T) RoHS : Compliant |
| 3,000 | ||
| F1206HI6000V024TM | AEM Inc | (Alt: F1206HI6000V024TM) RoHS : Compliant | 3,000 | |||
| F1206HA15V024TM | AEM Inc | (Alt: F1206HA15V024TM) RoHS : Compliant |
| 3,000 | ||
| F1206HC15A0TM | AEM Inc | Fuse, Surface Mount, 15 A, High Current, 35 V, 1206 [3216 Metric], SolidMatrix HC Series (Alt: F1206HC15A0TM) RoHS : Compliant | 0 | |||
| 68002-206HLF | Amphenol Corporation | (Alt: 68002-206HLF) RoHS : Compliant | 0 | |||
| F1206HB15V024T | AEM Inc | (Alt: F1206HB15V024T) RoHS : Compliant | 0 | |||
| F1206HC10A0TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 10 A, 35 VDC, 1206 [3216 Metric], SolidMatrix HC (Alt: F1206HC10A0TM) RoHS : Compliant | 0 | |||
| F1206HI1500V063T | AEM Inc | (Alt: F1206HI1500V063T) RoHS : Compliant | 0 | |||
| F1206HI4000V032TM | AEM Inc | (Alt: F1206HI4000V032TM) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MPV2100-206-HS | Microchip Technology Inc | Diode VAR Cap Single 22V 09pF 2Pin Style 206 (Alt: MPV2100-206-HS) RoHS : Not Compliant | 0 | ||
| MPP4203-206-HS | Microchip Technology Inc | Diode PIN Switch 50V 2Pin Style 206 (Alt: MPP4203-206-HS) RoHS : Compliant | 0 | |||
| MPP4201-206-HS | Microchip Technology Inc | MSWMPP4201206HS (Alt: MPP4201-206-HS) RoHS : Compliant | 0 | |||
PIC24EP512GP206-H/PT![]() | Microchip Technology Inc | TQFP 16 Bit MCU 512KB Flash 48KB RAM 60 MHz 64 Pin OpAmps Comparators PTG (Alt: PIC24EP512GP206-H/PT) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AMCV-1206H-560-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AMCV-1206H-600-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-380-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-850-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-101-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-300-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-180-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-480-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | LI1206H151R-10 | Steward, Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 18,698 | |
| 68000-206HLF | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Compliant |
| 7,473 | ||
| LI1206H900R-00 | Steward, Inc | IN STOCK SHIP TODAY |
| 2,350 | ||
| V56MLA1206H | Littelfuse Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,300 | ||
| V14MLA1206H | Littelfuse Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,258 | ||
| PTN1206H1211BBT | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant | 1,536 | |||
| V14MLA1206H | Harris Semiconductor | IN STOCK SHIP TODAY RoHS : Unknown |
| 1,500 | ||
| CC1206HNP0471J-T/R | TDK Corporation | IN STOCK SHIP TODAY |
| 1,000 | ||
| CC1206HNP0221J-T/R | TDK Corporation | IN STOCK SHIP TODAY |
| 1,000 | ||
| CC1206HNP0300J | TDK Corporation | IN STOCK SHIP TODAY |
| 1,000 | ||
| LCB1206H-101 | ISI | IN STOCK SHIP TODAY | 698 | |||
| CC1206HX7R224KTR | TDK Corporation | IN STOCK SHIP TODAY RoHS : Unknown |
| 555 | ||
| CC1206HX7R224KT0K0N | TDK Corporation | IN STOCK SHIP TODAY |
| 555 | ||
| P1206H4871BBW | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant | 100 | |||
![]() DB Roberts | NAS1352-06H12P | Military Specifications |
| 500 | ||
![]() EBV Elektronik | MMDP-67206HV-15-E | Microchip Technology Inc | FIFO Mem Async Dual DepthWidth BiDir 16K X 9 28Pin FPAK (Alt: MMDP-67206HV-15-E) RoHS : Not Compliant | 0 | ||
PIC24EP512GP206-H/PT![]() | Microchip Technology Inc | TQFP 16 Bit MCU 512KB Flash 48KB RAM 60 MHz 64 Pin OpAmps Comparators PTG (Alt: PIC24EP512GP206-H/PT) RoHS : Compliant | 0 | |||
![]() Maritex | CA3206H1300 | Cvilux Corporation | Low profile PCB connector; pitch 1.27mm; 6-contacts; THT; female; side entry RoHS : Compliant |
| 1,196 | |
| FUT0430WQ206H-ZC-A0 | HU-NAN | Display TFT; LCD 4.3"; 480xRGBx272 pixels; resistive touch panel RTP; IPS; white LED backlight; 250 cd/m2; 40 pins |
| 49 | ||
![]() Master Electronics | SF-1206HV10M-2 | Bourns Inc | SMD High Current High Voltage Multilayer Fuse - 10A - 1206 - 35VDC - -55°C to 125°C - Tape&Reel RoHS : Compliant |
| 30,000 | |
| CW1K-3DE20-6H | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| CW4K-3EE20-6H | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| TW-02-06-H-D-605-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-12-06-H-D-350-SM-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-12-06-H-D-485-SM-A-P | Samtec Inc | Board Stackers & Spacers Pin Header 12.32 mm 24 Contacts Solder 2 Rows 2 mm TW Series RoHS : Compliant |
| 0 | ||
| TW-12-06-H-D-315-164 | Samtec Inc | Conn Board Stacker HDR 24 POS 2mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| TW-12-06-H-D-475-SM-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-22-06-H-D-445-SM-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TLW-122-06-H-S-LL | Samtec Inc | Conn Unshrouded HDR 22 POS 2.54mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| SF-1206HHA1000R-2 | Bourns Inc | Fuse Chip 10A 50V SMD Solder Pad 1206 3.2 X 1.65 X 1mm Automotive AEC-Q200 RoHS : Compliant |
| 0 | ||
| FN9233E-12-06HI | TE Connectivity | IEC Inlet AP Filter 250VAC 12A Faston Earth Li MOQ Reduction RoHS : Compliant |
| 0 | ||
| FN9244EB-12-06HI | TE Connectivity | IEC Inlet HP Filter 250VAC 12A <5uA Faston Ea MOQ Reduction RoHS : Compliant |
| 0 | ||
| FN9244U-12-06HI | TE Connectivity | IEC Inlet HP Filter 250VAC 12A Faston Wide Mou MOQ Reduction RoHS : Compliant |
| 0 | ||
| HTSW-142-06-H-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W10206/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm N Male to 75 Ohm F Male Cable 36 Inch Length Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm N male to 75 Ohm F male cable 36 inch length using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N male to 75 Ohm F male cable 36 inch length using 75 Ohm RG187 coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and F type cable connection on the other. Our type N to type F cable assemblies have a male gender on end 1 and male on end 2. PE3W10206/HS-36 can also be known as a N type plug to F type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type F plug cable assembly PE3W10206/HS-36 is built with RG187 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type F cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this type N male to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10206/HS-36 can also be used in the other direction and will be type F male to N type male cable assembly if the opposite connectivity is required. Type N plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type F cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm F male cable 36 inch length using 75 Ohm RG187 coax with heatshrink. |
| 5 | |
| PE3W10206/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 60 inches. 75 Ohm N Male to 75 Ohm F Male Cable 60 Inch Length Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm N male to 75 Ohm F male cable 60 inch length using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N male to 75 Ohm F male cable 60 inch length using 75 Ohm RG187 coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to F type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type F cable connection on the other. Our N type to type F cable assemblies have a male gender on end 1 and male on end 2. PE3W10206/HS-60 can also be known as a type N plug to F type plug cable assembly and will be shipped same-day as it is purchased. N type plug to type F plug cable assembly PE3W10206/HS-60 is built with RG187 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type F cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this type N male to type F male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10206/HS-60 can also be used in the other direction and will be type F male to N type male cable assembly if the opposite connectivity is required. Type N plug to F type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type F cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm F male cable 60 inch length using 75 Ohm RG187 coax with heatshrink. |
| 5 | ||
| PE3W10206/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 48 inches. 75 Ohm N Male to 75 Ohm F Male Cable 48 Inch Length Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm N male to 75 Ohm F male cable 48 inch length using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N male to 75 Ohm F male cable 48 inch length using 75 Ohm RG187 coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type F cable connection on the other. Our N type to F type cable assemblies have a male gender on end 1 and male on end 2. PE3W10206/HS-48 can also be known as a N type plug to type F plug cable assembly and will be shipped same-day as it is purchased. Type N plug to F type plug cable assembly PE3W10206/HS-48 is built with RG187 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type F cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this type N male to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10206/HS-48 can also be used in the other direction and will be type F male to N type male cable assembly if the opposite connectivity is required. Type N plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to F type cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm F male cable 48 inch length using 75 Ohm RG187 coax with heatshrink. |
| 5 | ||
| PE3W10206/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 75 Ohm N Male to 75 Ohm F Male Cable 24 Inch Length Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm N male to 75 Ohm F male cable 24 inch length using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N male to 75 Ohm F male cable 24 inch length using 75 Ohm RG187 coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and type F cable connection on the other. Our type N to F type cable assemblies have a male gender on end 1 and male on end 2. PE3W10206/HS-24 can also be known as a type N plug to type F plug cable assembly and will be shipped same-day as it is purchased. N type plug to F type plug cable assembly PE3W10206/HS-24 is built with RG187 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type F cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this type N male to type F male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10206/HS-24 can also be used in the other direction and will be F type male to N type male cable assembly if the opposite connectivity is required. Type N plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type F cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm F male cable 24 inch length using 75 Ohm RG187 coax with heatshrink. |
| 5 | ||
| PE3W10206/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm N Male to 75 Ohm F Male Cable 12 Inch Length Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm N male to 75 Ohm F male cable 12 inch length using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N male to 75 Ohm F male cable 12 inch length using 75 Ohm RG187 coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type F cable connection on the other. Our type N to F type cable assemblies have a male gender on end 1 and male on end 2. PE3W10206/HS-12 can also be known as a type N plug to type F plug cable assembly and will be shipped same-day as it is purchased. N type plug to type F plug cable assembly PE3W10206/HS-12 is built with RG187 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to F type cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this type N male to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10206/HS-12 can also be used in the other direction and will be type F male to type N male cable assembly if the opposite connectivity is required. N type plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to F type cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm F male cable 12 inch length using 75 Ohm RG187 coax with heatshrink. |
| 5 | ||
| PE3W07206/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to BNC Female Bulkhead Cable Using LMR-195 Coax with HeatShrink. PE3W07206/HS is a reverse polarity TNC male to BNC female bulkhead cable using LMR-195 coax. This Pasternack reverse polarity TNC male to BNC female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm BNC for connector 2. Our reverse polarity male TNC to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07206/HS TNC reverse polarity male to BNC female bulkhead cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W01206/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. MCX Jack to SMA Male Low Loss Cable 200 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-200CM can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-200CM can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01206/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. MCX Jack to SMA Male Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 24 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-24 can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-24 can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01206/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. MCX Jack to SMA Male Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-48 can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-48 can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01206/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MCX Jack to SMA Male Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W05206/HS | Pasternack Enterprises | 0 | ||||
| PE3W01206/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. MCX Jack to SMA Male Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 36 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 36 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-36 can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-36 can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W22206/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 10KV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. 1.0/2.3 Male Right Angle to 10KV Male Cable Using RG58 Coax with HeatShrink. PE3W22206/HS is a 1.0/2.3 male right angle to 10KV male cable using RG58 coax. This Pasternack 1.0/2.3 male right angle to 10KV male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 10KV for connector 2. 1.0/2.3 right angle to 10KV coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 1.0/2.3 right angle to male 10KV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22206/HS 1.0/2.3 male right angle to 10KV male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W01206/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. MCX Jack to SMA Male Low Loss Cable 100 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-100CM can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-100CM can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0206/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. Mini UHF Male to N Female Cable Using RG400 Coax with HeatShrink. PE3C0206/HS is a Mini UHF male to N female cable using RG400 coax. This Pasternack Mini UHF male to N female cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm N for connector 2. Our male Mini UHF to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0206/HS Mini UHF male to N female cable assembly is constructed with RG400 coax. | 0 | |||
![]() Vyrian | P1206H4321BBT | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 4320ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 12,931 | ||
| P1206H1332DBT | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 13300ohm, 200V, 0.5% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 8,936 | |||
| P1206H1005BGT | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 10000000ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 8,611 | |||
| AMCV-1206H-560-T | Abracon Corporation | Varistor, 1J, Surface Mount RoHS : Compliant | 8,381 | |||
| QLMP-K206-HH0ED | Broadcom Limited | 6,908 | ||||
| V5.5MLA1206HX3078 | Littelfuse Inc | Varistor, 5.5V, 0.4J, Surface Mount RoHS : Compliant | 810 | |||
| P1206H4321BBTA | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 4320ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 | 788 | |||
| P-1206H4221BBTS | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.4W, 4220ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 786 | |||
| DSPIC33EP256MC206-H/PT | Microchip Technology Inc | 16-Bit Size, 0-Ext Bit, 60MHz, CMOS, PQFP64 RoHS : Compliant | 771 | |||
| P-1206H4321BBTS | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.4W, 4320ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 729 | |||
| P1206H4221BBT100 | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 4220ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 701 | |||
| C1206H104J3GACT1K0 | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 25V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.1uF, Surface Mount, 1206 | 465 | |||
| AMCV-1206H-850-T | Abracon Corporation | Varistor, 85V, 1.2J, Surface Mount RoHS : Compliant | 455 | |||
| C1206H104J3GACT100 | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 25V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.1uF, Surface Mount, 1206 | 373 | |||
| C1206H104J3GACT500 | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 25V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.1uF, Surface Mount, 1206 | 296 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |