2104W-R Price, Verteiler, Stock

2104W-R Verteiler

Verteiler

Teilenummer

Hersteller

Bauteilbeschribung

Price

Qty.
BuyNow

Ameya Holding Limited

XCVU9P-L2FLGC2104E5260

AMD Xilinx

1,580

SMP1321-040LF

Skyworks Solutions Inc

DIODE PIN 100V 150MA 0402
RoHS : Compliant

903

B82477G2104M

Infineon Technologies AG

600

CP2104-F03-GMR

Silicon Laboratories Inc

IC SGL USB-TO-UART BRIDGE 24QFN
RoHS : Compliant

GN2104R3BINE3

Semtech Corporation

MODULE RETIMER CDR

ComSIT USA

JZ305282104

MEI CHEUNG

AVAILABLE EU

866

CRCW1210412RFKEAHP

Vishay Intertechnologies

AVAILABLE EU
RoHS : Compliant

26,250

DMP2104LP7

Diodes Incorporated

AVAILABLE EU

313,293

Rutronik

CR32-104-JY

ASJ Holdings Limited

RC1206 100K 5% 0,25W TK100
RoHS : Compliant

20,000 : $0.0042
60,000 : $0.0033
100,000 : $0.0031
260,000 : $0.0031
780,000 : $0.003

140,000

IR2104SPBF

Infineon Technologies AG

Half Bridge Driver SOIC 8N
RoHS : Compliant

3,800 : $1.57
7,600 : $1.44
11,400 : $1.41
15,200 : $1.39
19,000 : $1.27

5,415

IRS2104SPBF

Infineon Technologies AG

Half Bridge Driver
RoHS : Compliant

95 : $0.7281
190 : $0.6709
285 : $0.6553
475 : $0.6449
760 : $0.5929

1,235

F339X121048MDA2B0

Vishay Intertechnologies

FF 1,0nF 480Vac 20% X1 P10 MKP
RoHS : Compliant

1,000 : $0.1029
2,000 : $0.0965
3,000 : $0.095
5,000 : $0.0934
10,000 : $0.0878

1,000

BFC233922104

Vishay Intertechnologies

FF 100nF 310Vac 20% X2 P10 MKP
RoHS : Compliant

750 : $0.123
1,500 : $0.1154
2,250 : $0.1135
3,750 : $0.1116
6,000 : $0.105

750

Chip-Germany GmbH

110 97B210 41

CAB

527

DB Roberts

RAS632-10-4ZI

PennEngineering (PEM)

Type RAS for sheet metal is a threaded right angle fastener that accepts standard unified or metric screws.

1 : $0.6273
100 : $0.5791
500 : $0.5067
1,000 : $0.4828
5,000 : $0.4681

26,522

MS21044C08

Military Specifications

1 : $1.4457
100 : $1.0159
500 : $0.7997
859 : $0.7997

859

2104

Heyco

SB 812-10 WHITE

57121-04808

Avdel

NEOSPEED RIV 3/16 MH STEEL

H3-50-421-044

Southco

The swinghandle nests into the housing for minimal protrusion and pops up to swing smoothly for easy latch actuation. Robust die-cast zinc construction provides durable corrosion-resistant performance with optional gasketing for indoor or outdoor use.

H3-60-121-044

Southco

2104-632-S-12

RAF Electronic Hardware

2104-440-AL-6

RAF Electronic Hardware

2104-632-B-28

RAF Electronic Hardware

12SWS2104

Essentra Components

SHOULDER WASHER, .310 ID, .500

62-10-402-10

Southco

2104-440-AL-22

RAF Electronic Hardware

HEX FEMALE STANDOFFS CLEAR ANODIZE

M2104-2545-S-12

RAF Electronic Hardware

PLATING CHRG 20/LOT

12104A

Essentra Components

METRIC THREADED CAPLDPE RED

2104-440-B-5

RAF Electronic Hardware

ECCO

0192210495

Molex

RoHS : Compliant

1 : $0.55

19221-0495

Molex

RoHS : Compliant

1 : $0.572

FDH Electronics

518321045

FDH Electronics

BJG Microwave C

195

512321041

W L Gore & Associates

BJG Microwave C

165

518321043

FDH Electronics

BJG Microwave C

123

E4041R2104355

Electro Adapter Inc

Backshells & Ac

732-8021-04 B

TE Connectivity

Connector Misc

100-210-4631-T

BJG Electronics

BJG Microwave C

590-59AD02-104

Honeywell Sensing and Control

Thermistor

1 : $263.28
5 : $263.28
10 : $219.4
25 : $177.208
50 : $177.208
100 : $161.663
250 : $148.626
500 : $148.626
1,000 : $148.626
2,500 : $148.626
10,000 : $148.626

440HJ030B2104-B

Glenair Inc

Backshells & Ac
RoHS : Not Compliant

DK-621-0433R-1S

TE Connectivity

Data Bus
RoHS : Not Compliant

1 : $1,367.436
5 : $1,274.729
10 : $1,139.53
25 : $1,122.522
50 : $1,122.522
100 : $1,106.015
250 : $1,074.414
500 : $1,044.569
1,000 : $1,030.26
2,500 : $1,030.26
10,000 : $1,030.26

311HS001NF2104E

Glenair Inc

Placeholder
RoHS : Not Compliant

D-621-0460

TE Connectivity

RF / Coaxial
RoHS : Not Compliant

D-621-0412-JD

TE Connectivity

Data Bus
RoHS : Compliant

1 : $336.136
5 : $313.347
10 : $280.113
25 : $275.933
50 : $275.933
100 : $271.875
250 : $264.107
500 : $256.771
1,000 : $253.253
2,500 : $253.253
10,000 : $253.253

262104

Amphenol RF

Connector

1355-072-1041

Aero-Electric Connector Inc

Cable Assembly

440HJ030M2104

Glenair Inc

Backshells & Ac

Flip Electronics

R7S921042VCBG#AC0

Renesas Electronics Corporation

Stock
RoHS : Compliant

1,607

R7S921047VCBG#AC0

Renesas Electronics Corporation

Stock
RoHS : Compliant

1,193

R7S921045VCBG#AC0

Renesas Electronics Corporation

Stock
RoHS : Compliant

980

CP2104X0993FGM

Silicon Laboratories Inc

Stock

800

R7S921040VCBG#AC0

Renesas Electronics Corporation

Stock
RoHS : Compliant

722

R7S921048VCBG#AC0

Renesas Electronics Corporation

Stock
RoHS : Compliant

654

R7S921046VCBG#AC0

Renesas Electronics Corporation

Stock
RoHS : Compliant

525

FXMA2104UMX

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.11

471

LPC2104FBD48/01,15

NXP Semiconductors

Stock
RoHS : Compliant

240

Maritex

JS-1121-04

Chyao Shiunn Electronic Industrial Ltd

Crimp terminal housing; pitch 3.96mm; 4-contacts; female; applicable wire AWG#18-22; 250V/7A

1,000 : $0.024
500 : $0.026
250 : $0.027
1 : $0.028

3,142

IR2104STRPBF

Infineon Technologies AG

Integrated Circuit Driver MOSFET half-bridge; CH:2; high-/low-side; 10-20V; -40+125 deg.C; SMD; SO8
RoHS : Compliant

2,500 : $0.545
1,000 : $0.634
100 : $0.847
25 : $0.972
1 : $1.023

2,490

DGD2104MS8-13

Diodes Incorporated

Gate Drivers; DGD2104MS8-13; DIODES; 2
RoHS : Compliant

1,000 : $0.304
500 : $0.33
100 : $0.399
30 : $0.481
10 : $0.57
1 : $0.757

1,680

C42Q2104K4FA405

Xiamen Faratronic Co Ltd

Polyester capacitor; 100nF; 305V; 10%; p=10mm; 13x12x6mm; -40+110C
RoHS : Compliant

1,000 : $0.049
500 : $0.049
100 : $0.051
1 : $0.107

1,571

321045

TE Connectivity

Ring Terminals; 321045; TE CONNECTIVITY; No; Copper; Tin; Free Hanging
RoHS : Compliant

1,000 : $0.343
500 : $0.373
100 : $0.424
10 : $0.529
1 : $0.6752

623

3210499

Phoenix Contact

Specialty Terminals; 3210499; PHOENIX CONTACT; 5.2 mm; 102 mm; 3; CB, CSA, UL, VDE
RoHS : Compliant

100 : $3.077
50 : $3.309
30 : $3.514
10 : $4.074
1 : $4.9513

177

DK-621-0411-P

TE Connectivity

Coaxial Connector Accessories; DK-621-0411-P; TE CONNECTIVITY; Straight; Solder
RoHS : Not Compliant

100 : $71.139
30 : $78.898
10 : $86.225
1 : $100.271

IRS2104STRPBF

Infineon Technologies AG

Gate Drivers; IRS2104STRPBF; INFINEON TECHNOLOGIES; Surface Mount; 600 mA; 8; 2
RoHS : Compliant

1,000 : $0.353
500 : $0.384
100 : $0.463
30 : $0.557
10 : $0.66
1 : $0.875

DK-621-0411-S

TE Connectivity

Coaxial Connector Accessories; DK-621-0411-S; TE CONNECTIVITY; Straight; Cable, Free Hanging; Solder
RoHS : Not Compliant

1,000 : $65.791
500 : $68.921
200 : $74.512
1 : $232.853

Pasternack Enterprises US

PE3C6210-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 48 inches. Plenum SMA Male to SMA Male Right Angle Low PIM Cable 48 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum SMA male to SMA male right angle low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum SMA male to SMA male right angle low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-SM-LP SMA to TC-SPP250-SM-RA-LP SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-SM-LP SMA cable connection on one end and right angle TC-SPP250-SM-RA-LP SMA cable connection on the other. Our low PIM TC-SPP250-SM-LP SMA to right angle TC-SPP250-SM-RA-LP SMA cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-SM-LP SMA to TC-SPP250-SM-RA-LP SMA cable is a male to male coax assembly, PE3C6210-48, can also be known as a low PIM TC-SPP250-SM-LP SMA plug to right angle TC-SPP250-SM-RA-LP SMA plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-SM-LP SMA plug to TC-SPP250-SM-RA-LP SMA plug cable assembly PE3C6210-48 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-SM-LP SMA cable assembly is manufactured with TC-SPP250-SM-LP SMA to right angle TC-SPP250-SM-RA-LP SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-SM-LP SMA male to TC-SPP250-SM-RA-LP SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6210-48 can also be used in the other direction and will be right angle TC-SPP250-SM-RA-LP SMA male to TC-SPP250-SM-LP SMA male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-SM-LP SMA plug to TC-SPP250-SM-RA-LP SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-SM-LP SMA to TC-SPP250-SM-RA-LP SMA cable assembly for quick shipment worldwide. Variations of TC-SPP250-SM-LP SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum SMA male to SMA male right angle low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts.

1 : $128.99
25 : $122.54
50 : $116.09
100 : $110.93

PE3W21044-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to SMA Male Cable 6 Inch Length Using PE-P086HF Coax, 18 GHz., Pasternack’s PE3W21044-6 SMA male to SMA male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W21044-6 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W21044-6 RF cable has an FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W21044-6 SMA plug to SMA plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a passivated stainless steel body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $47.31
25 : $44.94
50 : $42.58
100 : $40.69

PE3W12104LF/HS-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.370079 inches. Black FAKRA Jack to TNC Male Right Angle Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly black FAKRA jack to TNC male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Black FAKRA jack to TNC male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink, LF solder, FAKRA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and right angle TNC cable connection on the other. Our low loss FAKRA to right angle TNC cable assemblies have a jack gender on end 1 and male on end 2. This FAKRA to TNC cable is a jack to male coax assembly, PE3W12104LF/HS-100CM, can also be known as a low loss FAKRA female to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. FAKRA female to TNC plug cable assembly PE3W12104LF/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA jack to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12104LF/HS-100CM can also be used in the other direction and will be right angle TNC male to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to TNC cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this black FAKRA jack to TNC male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink, LF solder.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

PE3W21048LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. SMA Female 2 Hole Flange to Reverse Polarity BNC Male Cable Using RG402 Coax, LF Solder. PE3W21048LF is a SMA female 2 hole flange to reverse polarity BNC male cable using RG402 coax. This Pasternack SMA female 2 hole flange to reverse polarity BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our female SMA 2 hole flange to reverse polarity male BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W21048LF SMA female 2 hole flange to BNC reverse polarity male cable assembly is constructed with RG402 coax.

PE3W21044-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Male Cable 48 Inch Length Using PE-P086HF Coax, 18 GHz., Pasternack’s PE3W21044-48 SMA male to SMA male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W21044-48 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W21044-48 RF cable has an FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W21044-48 SMA plug to SMA plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a passivated stainless steel body with gold plating. Additional dimensions, specifications, and CAD drawings for this 48-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $96.97
25 : $92.12
50 : $87.27
100 : $83.39

PE3W12104/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Black FAKRA Jack to TNC Male Right Angle Cable Using LMR-100 Coax with HeatShrink. PE3W12104/HS is a FAKRA jack to TNC male right angle cable using LMR-100A coax. This Pasternack FAKRA jack to TNC male right angle cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm TNC for connector 2. FAKRA to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack FAKRA to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12104/HS FAKRA jack to TNC male right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W12104LF/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Black FAKRA Jack to TNC Male Right Angle Low Loss Cable Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly black FAKRA jack to TNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Black FAKRA jack to TNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder, FAKRA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and right angle TNC cable connection on the other. Our low loss FAKRA to right angle TNC cable assemblies have a jack gender on end 1 and male on end 2. This FAKRA to TNC cable is a jack to male coax assembly, PE3W12104LF/HS, can also be known as a low loss FAKRA female to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. FAKRA female to TNC plug cable assembly PE3W12104LF/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA jack to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12104LF/HS can also be used in the other direction and will be right angle TNC male to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to TNC cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this black FAKRA jack to TNC male right angle low loss cable using LMR-100 coax with heatshrink, LF solder.

PE3W21043LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MC-Card, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SSMA Male to MC-Card Plug Cable Using RG178 Coax with HeatShrink, LF Solder. PE3W21043LF/HS is a SSMA male to MC-Card plug cable using RG178 coax. This Pasternack SSMA male to MC-Card plug cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm MC-Card for connector 2. Our male SSMA to plug MC-Card cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21043LF/HS SSMA male to MC-Card plug cable assembly is constructed with RG178 coax.

PE3C2104/HS

Pasternack Enterprises

PE3W21049

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm. N Female to N Female Cable Using TCOM-600 Coax. PE3W21049 is a N female to N female cable using TCOM-600 coax. This Pasternack N female to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21049 N female to N female cable assembly is constructed with TCOM-600 coax.

PE3W21044/HS

Pasternack Enterprises

PE3W12104LF/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Black FAKRA Jack to TNC Male Right Angle Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly black FAKRA jack to TNC male right angle low loss cable 48 inch length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Black FAKRA jack to TNC male right angle low loss cable 48 inch length using LMR-100 coax with heatshrink, LF solder, FAKRA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and right angle TNC cable connection on the other. Our low loss FAKRA to right angle TNC cable assemblies have a jack gender on end 1 and male on end 2. This FAKRA to TNC cable is a jack to male coax assembly, PE3W12104LF/HS-48, can also be known as a low loss FAKRA female to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. FAKRA female to TNC plug cable assembly PE3W12104LF/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA jack to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12104LF/HS-48 can also be used in the other direction and will be right angle TNC male to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to TNC cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this black FAKRA jack to TNC male right angle low loss cable 48 inch length using LMR-100 coax with heatshrink, LF solder.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

PE3W21047/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. 10-32 Male Right Angle to TNC Female Bulkhead Cable Using RG174 Coax with HeatShrink. PE3W21047/HS is a 10-32 male right angle to TNC female bulkhead cable using RG174 coax. This Pasternack 10-32 male right angle to TNC female bulkhead cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm TNC for connector 2. 10-32 right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 10-32 right angle to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21047/HS 10-32 male right angle to TNC female bulkhead cable assembly is constructed with RG174 coax.

PE3W21044-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Cable 12 Inch Length Using PE-P086HF Coax, 18 GHz., Pasternack’s PE3W21044-12 SMA male to SMA male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W21044-12 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W21044-12 RF cable has an FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W21044-12 SMA plug to SMA plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a passivated stainless steel body with gold plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $54.4
25 : $51.68
50 : $48.96
100 : $46.78

PE3W21044-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using PE-P086HF Coax, 18 GHz., Pasternack’s PE3W21044-36 SMA male to SMA male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W21044-36 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W21044-36 RF cable has an FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W21044-36 SMA plug to SMA plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a passivated stainless steel body with gold plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $82.78
25 : $78.64
50 : $74.5
100 : $71.19