229N-R2 Price, Verteiler, Stock

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to BNC Female Cable 24 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly SMA male to BNC female cable 24 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to BNC female cable 24 inch length using RG178 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and female on end 2. PE3W02293/HS-24 can also be known as a SMA plug to BNC jack cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC jack cable assembly PE3W02293/HS-24 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02293/HS-24 can also be used in the other direction and will be BNC female to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC female cable 24 inch length using RG178 coax with heatshrink.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

PE3W02294/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Right Angle Cable Using LMR-400 Coax with HeatShrink. PE3W02294/HS is a TNC male to TNC male right angle cable using LMR-400 coax. This Pasternack TNC male to TNC male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02294/HS TNC male to TNC male right angle cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W04229

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using RG401 Coax. PE3W04229 is a N male to SMA male cable using RG401 coax. This Pasternack N male to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04229 N male to SMA male cable assembly is constructed with RG401 coax.

PE3W12293

Pasternack Enterprises

Key Specifications, Connector Series 1: C, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. C Female Bulkhead to TNC Female Cable Using LMR-195 Coax. PE3W12293 is a C female bulkhead to TNC female cable using LMR-195 coax. This Pasternack C female bulkhead to TNC female cable assembly uses a 50 Ohm C for connector 1 and a 50 Ohm TNC for connector 2. Our female C bulkhead to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12293 C female bulkhead to TNC female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W22913

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Female to SMB Plug Cable Using LMR-100 Coax. PE3W22913 is a SMA female to SMB plug cable using LMR-100A coax. This Pasternack SMA female to SMB plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. Our female SMA to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22913 SMA female to SMB plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W22995

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to N Female Bulkhead Cable Using PE-SR402AL Coax. PE3W22995 is a SMA male right angle to N female bulkhead cable using PE-SR402AL coax. This Pasternack SMA male right angle to N female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female N bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W22995 SMA male right angle to N female bulkhead cable assembly is constructed with PE-SR402AL coax.

PE3C8229-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. 4.1/9.5 Mini DIN Female to 7/16 DIN Male Low PIM Cable 200 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN female to 7/16 DIN male low PIM cable 200 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN female to 7/16 DIN male low PIM cable 200 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 7/16 DIN cable is a female to male coax assembly, PE3C8229-200CM, can also be known as a low PIM 4.1/9.5 mini DIN jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN jack to 7/16 DIN plug cable assembly PE3C8229-200CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8229-200CM can also be used in the other direction and will be 7/16 DIN male to 4.1/9.5 mini DIN female cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN female to 7/16 DIN male low PIM cable 200 cm length using TFT-402 coax using Times Microwave components.

1 : $97.99
25 : $93.09
50 : $88.19
100 : $84.27

PE3C8229-48

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 48 inches. 4.1/9.5 Mini DIN Female to 7/16 DIN Male Low PIM Cable 48 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN female to 7/16 DIN male low PIM cable 48 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN female to 7/16 DIN male low PIM cable 48 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 7/16 DIN cable is a female to male coax assembly, PE3C8229-48, can also be known as a low PIM 4.1/9.5 mini DIN jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN jack to 7/16 DIN plug cable assembly PE3C8229-48 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8229-48 can also be used in the other direction and will be 7/16 DIN male to 4.1/9.5 mini DIN female cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN female to 7/16 DIN male low PIM cable 48 inch length using TFT-402 coax using Times Microwave components.

1 : $83.99
25 : $79.79
50 : $75.59
100 : $72.23

PE3W05229

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to Mini SMP Female Right Angle Cable Using PE-SR047FL Coax. PE3W05229 is a Mini SMP female right angle to Mini SMP female right angle cable using PE-SR047FL coax. This Pasternack Mini SMP female right angle to Mini SMP female right angle cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm Mini SMP for connector 2. Mini SMP right angle to Mini SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP right angle to female Mini SMP right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W05229 Mini SMP female right angle to Mini SMP female right angle cable assembly is constructed with PE-SR047FL coax.

PE3W22941

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to SMA Female Right Angle Bulkhead Cable Using RG316 Coax. PE3W22941 is a MMCX plug right angle to SMA female right angle bulkhead cable using RG316 coax. This Pasternack MMCX plug right angle to SMA female right angle bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. MMCX right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to female SMA right anglebulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22941 MMCX plug right angle to SMA female right angle bulkhead cable assembly is constructed with RG316 coax.

PE3W22947LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using PE-P086HF Coax, LF Solder. PE3W22947LF is a N male to SMA male cable using PE-P086HF coax. This Pasternack N male to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22947LF N male to SMA male cable assembly is constructed with PE-P086HF coax.

PE3W22978

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMA Male to SSMC Plug Right Angle Cable Using RG316-DS Coax. PE3W22978 is a SMA male to SSMC plug right angle cable using RG316-DS coax. This Pasternack SMA male to SSMC plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMC for connector 2. SMA to SSMC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to plug SSMC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22978 SMA male to SSMC plug right angle cable assembly is constructed with RG316-DS coax.

PE-W229TR1002

Pasternack Enterprises

Key Specifications, Maximum Power: 5 Watt, Waveguide Size: WR-229, Minimum Frequency: 3.22 GHz, Maximum Frequency: 4.9 GHz. 5 Watts WR-229 Waveguide Load 3.22 GHz to 4.9 GHz, Brass with CPR-229F Flange. PE-W229TR1002 5 Watts waveguide load (also known as waveguide termination) has a WR-229 input. This Pasternack WR-229 waveguide load / termination is rated for a minimum frequency of 3.22 GHz and a maximum frequency of 4.9 GHz. Our WR-229 waveguide terminator has a maximum input power of 5 Watts. WR-229 waveguide load / termination PE-W229TR1002 has an average maximum VSWR of 1.2:1. This Pasternack WR-229 instrumentation grade waveguide termination / load is part of over 40,000 in-stock RF, microwave and millimeter wave components. Our WR-229 load ships same day as purchased worldwide as with our other RF parts.

1 : $630.0
5 : $604.8
10 : $579.6
25 : $554.4

PE3C2293/HS

Pasternack Enterprises

PE3C2295-72

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 72 inches. BNC Male to BNC Male Cable 72 Inch Length Using RG174 Coax., Radio frequency assembly BNC male to BNC male cable 72 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 72 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C2295-72, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C2295-72 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 72 inch length using RG174 coax.

Venkel Ltd.

TFCR0402-16W-C-2291FT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;2.29K;�1%
RoHS : Compliant

TFCR0402-16W-K-2290CT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�100PPM;229R;�0.25%
RoHS : Compliant

TFCR0603-10W-C-2293DT

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;229K ;�0.5%
RoHS : Compliant

TFCR0603-10W-E-2291DT

VENKEL LTD

Thin Film CR;0603;1/10W;�25PPM;2.29K;�0.5%
RoHS : Compliant

TFCR0603-10W-K-2292CT

VENKEL LTD

Thin Film CR;0603;1/10W;�100PPM;22.9K;�0.25%
RoHS : Compliant

TFCR0603-16W-E-2292BT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�25PPM;22.9K;�0.1%
RoHS : Compliant

TFCR0805-10W-C-2293CT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;229K ;�0.25%
RoHS : Compliant

TFCR0805-8W-C-2292CT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�50PPM;22.9K;�0.25%
RoHS : Compliant

TFCR0805-8W-E-2291DT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�25PPM;2.29K;�0.5%
RoHS : Compliant

UPTF0402-16W-N-2290AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�10PPM;229R;�0.05%
RoHS : Compliant

UPTF0402-16W-P-2290UT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�5PPM;229R;�0.01%
RoHS : Compliant

UPTF0603-16W-N-2291BT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;2.29K;�0.1%
RoHS : Compliant

UPTF0603-16W-N-2292UT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;22.9K;�0.01%
RoHS : Compliant

UPTF0603-16W-N-2293CT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;229K ;�0.25%
RoHS : Compliant

UPTF0603-16W-P-2290UT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;229R;�0.01%
RoHS : Compliant

Waytek, Inc.

131922-91AW

General Cable Technologies Corporation

12GA GXL Red Cross-Link Automotive Wire XLPE -51C to 125C

250 : $0.4487
500 : $0.366
1,000 : $0.2851
1,500 : $0.2575
3,000 : $0.2364

128,742

148522-91W

General Cable Technologies Corporation

16GA SXL Orange Cross-Link Automotive Wire XLPE -51C to 125C

500 : $0.1741
1,000 : $0.1481
2,000 : $0.1213
5,000 : $0.1109

57,000

BK/1A2294

Eaton Electronics

Fuse Clip for 46004

20 : $0.71
50 : $0.6182
100 : $0.5748
200 : $0.5361
500 : $0.483
1,000 : $0.4564

894

131922-91W

General Cable Technologies Corporation

12GA GXL Pink Cross-Link Automotive Wire XLPE -51C to 125C

250 : $0.4487
500 : $0.366
1,000 : $0.2851
1,500 : $0.2575
3,000 : $0.2364

500

22902-68

Eaton Electronics

6 Amp Mini Fuse Resistor 68 Ohm Bussmann 22902-68 46882 Vec RTMR 280 Style

1 : $11.48
10 : $11.07
50 : $10.67
100 : $10.13
200 : $9.79
500 : $9.43

22903-6

Eaton Electronics

6 AMP Mini Fuse Diode Bussmann 22903-6

1 : $14.04
10 : $13.28
50 : $11.84
100 : $11.54
200 : $11.16
500 : $10.85

19221-0229

Molex

6GA Tinned Eyelet 3/8" Stud
RoHS : Compliant

20 : $0.7337
50 : $0.6917
100 : $0.6403
200 : $0.6216
500 : $0.6029
1,000 : $0.5795

Win Source Electronics

TPS22910AYZVR

Texas Instruments

Power Switch 1-OUT 2A 0.0839Ohm 4-Pin DSBGA T/R / IC LOAD SWITCH 2A 4DSBAGA
RoHS : Compliant

1,465 : $0.205
1,175 : $0.2134
905 : $0.2217
630 : $0.2384
410 : $0.2467
190 : $0.2634

249,730

TPS22916CNYFPR

Texas Instruments

IC PWR SWITCH P-CHAN 1:1 4DSBGA
RoHS : Compliant

1,570 : $0.1912
1,175 : $0.2133
910 : $0.2207
660 : $0.228
425 : $0.2354
175 : $0.2868

191,540

TPS22919DCKT

Texas Instruments

IC PWR SWITCH N-CHAN 1:1 SC70-6 / Power Switch/Driver 1:1 N-Channel 1.5A SC-70-6
RoHS : Compliant

4,735 : $0.0634
3,790 : $0.066
2,920 : $0.0686
2,040 : $0.0737
1,315 : $0.0763
615 : $0.0814

106,170

MMSZ5229B-7-F

Diodes Incorporated

DIODE ZENER 4.3V 500MW SOD123 / Zener Diode Single 4.3V 5% 22Ohm 500mW 2-Pin SOD-123 T/R
RoHS : Compliant

25,000 : $0.0156
18,660 : $0.0174
14,495 : $0.0178
10,490 : $0.0186
6,805 : $0.019
2,795 : $0.0232

105,218

TPS22965NDSGR

Texas Instruments

IC PWR SWITCH N-CHAN 1:1 8WSON / Power Switch/Driver 1:1 N-Channel 6A 8-WSON (2x2)
RoHS : Compliant

600 : $0.5005
450 : $0.5583
350 : $0.5775
255 : $0.5968
165 : $0.616
70 : $0.7508

97,440

MIC2290YMLTR MLF8

Micrel Inc

390 : $0.8641
315 : $0.9
240 : $0.936
170 : $1.008
110 : $1.0441
55 : $1.116

92,880

BU4229G-TR

ROHM Semiconductor

Processor Supervisor 2.9V 1 Active Low/Open Drain 5-Pin SSOP T/R / IC DETECTOR VOLT 2.9V ODRN 5SSOP
RoHS : Compliant

2,585 : $0.1161
1,935 : $0.1295
1,495 : $0.134
1,085 : $0.1384
700 : $0.1429
290 : $0.1741

63,000

TPS22913CYZVR

Texas Instruments

IC LOAD SWITCH 2A 4DSBGA
RoHS : Compliant

795 : $0.3787
595 : $0.4224
460 : $0.437
335 : $0.4515
215 : $0.4661
90 : $0.5681

54,180

TPS22902BYFPR

Texas Instruments

IC LOAD SWITCH ULOW RDS 4DSBGA
RoHS : Compliant

1,015 : $0.2957
760 : $0.3298
590 : $0.3411
430 : $0.3525
275 : $0.3639
115 : $0.4435

34,800

TPS22965NQWDSGRQ1

Texas Instruments

IC PWR SWITCH N-CHAN 1:1 8WSON
RoHS : Compliant

480 : $0.6273
360 : $0.6997
280 : $0.7238
205 : $0.7479
130 : $0.7721
55 : $0.941

33,000

AON2290

Alpha & Omega Semiconductor

100V N-Channel MOSFET
RoHS : Compliant

1,345 : $0.2237
1,075 : $0.2328
830 : $0.2419
580 : $0.26
375 : $0.2691
175 : $0.2873

30,000

1-2295018-2

TE Connectivity

CONN RCPT USB3.1 TYPEC 24POS SMD / USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Receptacle Connector 24 Position Board Cutout, Surface Mount, Right Angle; Through Hole
RoHS : Compliant

69 : $4.3913
52 : $4.898
40 : $5.0669
29 : $5.2358
19 : $5.4047
8 : $6.587

15,880

FAN3229TMPX

onsemi

IC GATE DRVR LOW-SIDE 8MLP
RoHS : Compliant

28 : $12.0421
21 : $13.4316
17 : $13.8948
12 : $14.358
8 : $14.8211
4 : $18.0632

5,690

IRFS4229TRLPBF-MX

International Rectifier

171 : $1.976
128 : $2.204
99 : $2.28
72 : $2.356
47 : $2.4321
19 : $2.964

1,480

LTC6229HDD#PBF

Analog Devices Inc

IC OPAMP GP 1 CIRCUIT 10DFN / General Purpose Amplifier 1 Circuit Rail-to-Rail 10-DFN (3x3)
RoHS : Compliant

6 : $56.5015
5 : $63.0209
4 : $65.1941
3 : $67.3672
2 : $69.5404
1 : $84.7522

1,000

229N-R2 Verteiler

Link URL