| Datenblatt-Suchmaschine für elektronische Bauteile |
|
244L-P20-R Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
![]() DigiKey | SN74ALVTH162244LR | Rochester Electronics LLC | IC BUFF 2.3V/2.7V 48-SSOP |
| 33,670 | |
| TLP292-4(4LGBTRE | Toshiba America Electronic Components | OPTOISO 3.75KV 4CH TRANS 16-SO |
| 5,996 | ||
| TLP292-4(4LGBTRE | Toshiba America Electronic Components | OPTOISO 3.75KV 4CH TRANS 16-SO |
| 5,996 | ||
| TLP292-4(4LGBTRE | Toshiba America Electronic Components | OPTOISO 3.75KV 4CH TRANS 16-SO |
| 4,000 | ||
| KLCA32-44-LD | Kun Hung Electric Co Ltd | SWITCH SNAP ACTION DPST 10A 250V |
| 2,000 | ||
| 74FCT162244LBCPA | Rochester Electronics LLC | FAST CMOS 16 BIT BUFFER/LINE DR |
| 1,635 | ||
| 74FCT162244LBETPA | Rochester Electronics LLC | FAST CMOS 16 BIT BUFFER/LINE DR |
| 1,449 | ||
| CY8C3244LTI-123T | Infineon Technologies AG | IC MCU 8BIT 16KB FLASH 48QFN RoHS : Compliant |
| 1,310 | ||
| CY8C3244LTI-123T | Infineon Technologies AG | IC MCU 8BIT 16KB FLASH 48QFN RoHS : Compliant |
| 1,310 | ||
| CY8C3244LTI-123T | Infineon Technologies AG | IC MCU 8BIT 16KB FLASH 48QFN RoHS : Compliant |
| 1,310 | ||
TLP292-4(4LGBTPE![]() | Toshiba America Electronic Components | OPTOISO 3.75KV 4CH TRANS 16-SO RoHS : Compliant |
| 1,036 | ||
TLP292-4(4LGBTPE![]() | Toshiba America Electronic Components | OPTOISO 3.75KV 4CH TRANS 16-SO RoHS : Compliant |
| 1,036 | ||
| S32M244LCABWKHST | FLIP ELECTRONICS | SoC, CMOS, PQFP64 |
| 160 | ||
| ESQ-102-44-L-S | JRH ELECTRONICS | CONN SOCKET 2POS 0.1 GOLD PCB |
| 119 | ||
| ESQ-112-44-L-S | JRH ELECTRONICS | CONN SOCKET 12POS 0.1 GOLD PCB |
| 49 | ||
![]() Avnet Americas | POM-2244L-C33-R | PUI Audio | Microphone, Omnidirectional, 50 Hz to 16 kHz, 2 VDC to 10 VDC, 2.2 kohm, -44 dB, 200 ?A - Boxed Product (Development Kits) (Alt: POM-2244L-C33-R) RoHS : Compliant |
| 13,080 | |
| ESQ-102-44-L-D | Samtec Inc | - Bulk (Alt: ESQ-102-44-L-D) RoHS : Compliant |
| 0 | ||
| ESW-102-44-L-D-LL | Samtec Inc | Board Stackers & Spacers, Socket Strip, 18.67 mm, 4 Contacts, Solder, 2 Rows, 2.54 mm, ESW Series - Bulk (Alt: ESW-102-44-L-D-LL) RoHS : Compliant |
| 0 | ||
| ESW-112-44-L-D | Samtec Inc | Board Stackers & Spacers, Socket Strip, 2.54 mm, 24 Contacts, Solder, 2 Rows, 2.54 mm, ESW Series - Rail/Tube (Alt: ESW-112-44-L-D) RoHS : Compliant |
| 0 | ||
| ESQ-112-44-L-S | Samtec Inc | Board Stackers & Spacers, Socket Strip, 2.54 mm, 12 Contacts, Solder, 1 Rows, 2.54 mm, ESQ Series - Rail/Tube (Alt: ESQ-112-44-L-S) RoHS : Compliant |
| 0 | ||
| S32M244LCABWKHST | NXP Semiconductors | ARM MCU, S32M2 Family S32M24x Series Microcontrollers, ARM Cortex-M4F, 32 bit, 80 MHz, 512 KB - Trays (Alt: S32M244LCABWKHST) RoHS : Compliant |
| 0 | ||
| S32M244LCABWKHST | NXP Semiconductors | - Trays (Alt: S32M244LCABWKHST) RoHS : Compliant | 0 | |||
| ZL30244LFF7 | Microchip Technology Inc | - Tape and Reel (Alt: ZL30244LFF7) RoHS : Not Compliant |
| 0 | ||
| 54ACT244LMQB | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, W/3- - Rail/Tube (Alt: 54ACT244LMQB) RoHS : Not Compliant | 0 | |||
| ARC6-16-24.4-LU-LU-3-1 | Samtec Inc | - Bulk (Alt: ARC6-16-24.4-LU-LU-3-1) RoHS : Compliant |
| 0 | ||
| ARC6-08-24.4-LU-LD-2-1 | Samtec Inc | - Bulk (Alt: ARC6-08-24.4-LU-LD-2-1) RoHS : Compliant | 0 | |||
| CY8C3244LTI-123T | Infineon Technologies AG | MCU 8-Bit PSoC 8051 CISC 16KB Flash 2.5V/3.3V/5V 48-Pin QFN EP T/R - Tape and Reel (Alt: CY8C3244LTI-123T) RoHS : Compliant |
| 0 | ||
TLP292-4(4LGBTPE![]() | Toshiba America Electronic Components | - Tape and Reel (Alt: TLP292-4(4LGBTPE) RoHS : Compliant |
| 0 | ||
| 54AC244LMQB | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH - Rail/Tube (Alt: 54AC244LMQB) RoHS : Not Compliant | 0 | |||
| TLP292-4(4LGBTRE | Toshiba America Electronic Components | - Tape and Reel (Alt: TLP292-4(4LGBTRE) RoHS : Compliant |
| 0 | ||
![]() Newark | CY8C6244LQI-S4D92 | Infineon Technologies AG | PROGRAMMABLE SOC, 48MHZ, QFN-EP-68; RoHS : Compliant |
| 1,207 | |
| ESW-102-44-L-D | Samtec Inc | CONNECTOR, RCPT, 4POS, 2ROW, 2.54MM; RoHS : Compliant |
| 175 | ||
| S32M244LCABWKHST | NXP Semiconductors | MCU, 32BIT, 80MHZ, LQFP-EP-64; RoHS : Compliant |
| 160 | ||
| S32M244LCABWKHST | NXP Semiconductors | MCU, 32BIT, 80MHZ, LQFP-EP-64; RoHS : Compliant |
| 160 | ||
| ESQ-102-44-L-S | Samtec Inc | SOCKET, 2.54MM, VERTICAL THT, 2WAY; RoHS : Compliant |
| 90 | ||
| ESW-112-44-L-D | Samtec Inc | CONNECTOR, RCPT, 24POS, 2ROW, 2.54MM; RoHS : Compliant |
| 77 | ||
| ESQ-112-44-L-D | Samtec Inc | SOCKET, 2.54MM, VERTICAL THT, 24WAY; RoHS : Compliant |
| 76 | ||
| POM-2244L-C33-R | PUI Audio | MICROPHONE, ECM, OMNIDIRECTIONAL, 2K2; RoHS : Compliant |
| 60 | ||
| X1005244-LWA3SX10A2 | Kyocera AVX Components | RF ANTENNAS, 5.15-5.85GHZ, ADHESIVE; Antenna Type:GNSS / LTE / WiFi; Frequency Min:5.15GHz; Frequency Max:5.85GHz; Antenna Mounting:Adhesive; Gain:2dBi; VSWR:2; Input Power:-; Input Impedance:50ohm; Antenna Polarization:- RoHS Compliant: Yes RoHS : Compliant |
| 47 | ||
| ESW-112-44-L-S | Samtec Inc | CONNECTOR, RCPT, 12POS, 1ROW, 2.54MM; RoHS : Compliant |
| 41 | ||
| ESQ-122-44-L-D | Samtec Inc | SOCKET, 2.54MM, VERTICAL THT, 44WAY; RoHS : Compliant |
| 40 | ||
| X1005244-LWA3SX10A2 | Kyocera AVX Components | EXTERNAL ANTENNA, 2.3GHZ-2.69GHZ, 4.6DBI; RoHS : Compliant |
| 39 | ||
| ESQ-132-44-L-D | Samtec Inc | SOCKET, 2.54MM, VERTICAL THT, 64WAY; RoHS : Compliant |
| 38 | ||
| ESQ-112-44-L-S | Samtec Inc | SOCKET, 2.54MM, VERTICAL THT, 12WAY; RoHS : Compliant |
| 37 | ||
| ESQ-132-44-L-S | Samtec Inc | RCPT, PCB, BRD-TO-BRD, 2.54MM, 1ROWS; RoHS : Compliant |
| 26 | ||
![]() RS | 244L050 | Goodyear Belts | SYNCHRONOUS BELT, L SECTION, 13 MM WIDTH, 9.53 MM PITCH, 65 TEETH, 620 MM LENGT |
| 0 | |
| 34-244/L | Protective Industrial Products | MAXIFLEX ELITE, 18G BL. NYLON SHELL, MICROFOAM NITRILE DOT; 12 PAIR PER BX |
| 0 | ||
| 5244L1610 | Norgren | BARB FITTING, ADJS ELB 1/16-10-32, NKL PL BRASS |
| 0 | ||
| 5244L3210 | Norgren | BARB FITTING, ADJS ELB 3/32-10-32, NKL PL BRASS |
| 0 | ||
| 89006244LF | Amphenol FCi | 89006-244LF-METRAL HDR 1MX5R PF |
| 0 | ||
| 66900244LF | Amphenol FCi | 66900-244LF-QKE II FEMALE |
| 0 | ||
| VX244LGAXB | SMC Corporation of America | SOLENOID VALVE, 2 PORT, FOR VACUUM, DIR OPER, SS, 1/4", NO |
| 0 | ||
| 71600244LF | Amphenol FCi | QUICKIE |
| 0 | ||
| 71918244LF | Amphenol FCi | QUICKIE |
| 0 | ||
| 52601G244LF | Amphenol FCi | QUICKIE HEADER |
| 0 | ||
| 7731312244LF | Amphenol FCi | BERGSTIK |
| 0 | ||
| 9527850244LF | Amphenol FCi | BERGSTIK STR DR SMT - LG |
| 0 | ||
| 7731342244LF | Amphenol FCi | BERGSTIK |
| 0 | ||
| 7731711244LF | Amphenol FCi | BERGSTIK |
| 0 | ||
| 10127721244LF | Amphenol FCi | Wire to Board connector, Header, Dual row, Vertical Through hole, 24 positions |
| 0 | ||
![]() Microchip Technology Inc | ZL30244LFF7 | Microchip Technology Inc | Dual Channel Any-Rate Clk Multiplier, VFLGA, Projected EOL: 2046-04-25 - Contact for Pricing RoHS : Compliant | 0 | ||
| ZL30244LFG7 | Microchip Technology Inc | Dual Channel Any-Rate Clk Multiplier, VFLGA, Projected EOL: 2046-04-25 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Rochester Electronics | S32M244LCABWKHST | NXP Semiconductors | IC MCU ARM® Cortex®-M4F 32Bit 1 Core FLASH 512kB (512k x 8) 80MHz 64-QFP Tray RoHS : Compliant |
| 1,078 | |
| CY8C3244LTI-130 | Infineon Technologies AG | IC MCU 8051 8Bit 1 Core FLASH 16kB (16k x 8) 50MHz 68-QFN Tray RoHS : Compliant |
| 1,078 | ||
SN74ALVTH162244LR![]() | Texas Instruments | Bus Driver, ALVT Series, 16-Func, 4-Bit, True Output, BICMOS, PDSO48 RoHS : Compliant |
| 33,670 | ||
| A1244LLHLX-I1-T | Allegro MicroSystems LLC | Hall Effect Sensor, -8mT Min, 8mT Max, BICMOS, Plastic/epoxy, Rectangular, 3 Pin, Surface Mount RoHS : Compliant |
| 9,108 | ||
CY8C3244LTI-123![]() | Cypress Semiconductor | IC MCU 8051 8Bit 1 Core FLASH 16kB (16k x 8) 50MHz 48-QFN Tray RoHS : Compliant |
| 3,553 | ||
CY8C3244LTI-130![]() | Cypress Semiconductor | IC MCU 8051 8Bit 1 Core FLASH 16kB (16k x 8) 50MHz 68-QFN Tray RoHS : Compliant |
| 21 | ||
| CY8CTMA442-44LQI | Cypress Semiconductor | TRUE TOUCH MCU RoHS : Not Compliant |
| 3,079 | ||
| 74FCT162244LBCPA | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 1,635 | ||
| 74FCT162244LBCTPV | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 5,028 | ||
| 74FCT162244LBETPA | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 1,449 | ||
| 74FCT162244LBETPV | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 5,086 | ||
| 74FCT16244LBATPA | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 1,207 | ||
| 74FCT16244LBCTPA | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 1,426 | ||
| 74FCT166244LBCTPV | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 413 | ||
| 74FCT166244LCTPV | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 529 | ||
![]() Sager | ESQ-102-44-L-D | Samtec Inc | PC / 104 Connectors Elevated Socket Strip, 0.100 Pitch RoHS : Compliant |
| 175 | |
| ESW-102-44-L-D | Samtec Inc | PC / 104 Connectors .100 Elevated Socket Strip RoHS : Compliant |
| 175 | ||
| ESW-102-44-L-D-LL | Samtec Inc | PC / 104 Connectors .100 Elevated Socket Strip RoHS : Compliant |
| 144 | ||
| ESQ-102-44-L-S | Samtec Inc | PC / 104 Connectors Elevated Socket Strip, 0.100 Pitch RoHS : Compliant |
| 90 | ||
| ESW-112-44-L-D | Samtec Inc | PC / 104 Connectors .100 Elevated Socket Strip RoHS : Compliant |
| 77 | ||
| ESW-112-44-L-S | Samtec Inc | PC / 104 Connectors .100 Elevated Socket Strip RoHS : Compliant |
| 41 | ||
| ESQ-132-44-L-D | Samtec Inc | PC / 104 Connectors Elevated Socket Strip, 0.100 Pitch RoHS : Compliant |
| 38 | ||
| ESQ-112-44-L-S | Samtec Inc | PC / 104 Connectors Elevated Socket Strip, 0.100 Pitch RoHS : Compliant |
| 37 | ||
| VGB2GXXC-G9CG2-44L-XRL2 | Carling Technologies | Rocker Switches RoHS : Compliant | 0 | |||
| ARC6-16-24.4-LU-LU-3-1 | Samtec Inc | Specialized Cables AcceleRate Slim Cable Assembly, 0.635 mm Pitch RoHS : Compliant |
| 0 | ||
| ARC6-08-24.4-LU-LD-2-1 | Samtec Inc | ACCELERATE� SLIM CABLE ASSEMBLY RoHS : Compliant |
| 0 | ||
| E244L | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| DW-05-13-L-D-244-LL | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| ARC6-24-24.4-LU-LD-2-1 | Samtec Inc | ACCELERATE� SLIM CABLE ASSEMBLY RoHS : Compliant |
| 0 | ||
| ARC6-08-24.4-LU-LU-3-1 | Samtec Inc | Specialized Cables AcceleRate Slim Cable Assembly, 0.635 mm Pitch RoHS : Compliant |
| 0 | ||
![]() TME | BS-244L-B | axiomet | Laboratory connector: 4mm banana; socket; 60VDC; 24A; black; 28mm |
| 4,672 | |
| BS-244L-R | axiomet | Laboratory connector: 4mm banana; socket; 60VDC; 24A; red; 28mm |
| 1,162 | ||
| BS-244L-Y | axiomet | Laboratory connector: 4mm banana; socket; 60VDC; 24A; yellow; 28mm |
| 792 | ||
| 71918-244LF | Amphenol Corporation | Connector: IDC; male; PIN: 44; Quickie; straight; 2.54mm; UL94V-0 |
| 315 | ||
| CHOT 24.4 L | ILME UK Ltd | Enclosure for connectors: HDC; size 104.27; for cable; for latch |
| 0 | ||
| CHVT 24.4 L | ILME UK Ltd | Enclosure for connectors: HDC; size 104.27; for cable; for latch |
| 0 | ||
| ARC6-08-24.4-LU-LD-2-1 | Samtec Inc | Cable; PIN: 26; 619.76mm; Insulation: PVC; blue; gold-plated; 34AWG RoHS : Compliant |
| 0 | ||
| ARC6-24-24.4-LU-LD-2-1 | Samtec Inc | Cable; PIN: 74; 619.76mm; Insulation: PVC; blue; gold-plated; 34AWG RoHS : Compliant |
| 0 | ||
| CY8C6244LQI-S4D62 | Infineon Technologies AG | IC: microcontroller RoHS : Compliant |
| 0 | ||
| CY8C6244LQI-S4D12 | Infineon Technologies AG | IC: microcontroller RoHS : Compliant |
| 0 | ||
| TLP292-4(4LGBTPE(T | Toshiba America Electronic Components | Optocoupler; SMD; Ch: 4; Uinsul: 3.75kV; Uce: 80V; SO16; 50mA RoHS : Compliant |
| 0 | ||
| CY8C6244LQI-S4D82 | Infineon Technologies AG | IC: microcontroller RoHS : Compliant |
| 0 | ||
| CY8C4244LQI-443 | Infineon Technologies AG | IC: PSoC microcontroller; 48MHz; QFN40; 4kBSRAM,16kBFLASH RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | S1997F2244L8 | SOURIAU-SUNBANK |
| 0 | ||
| 1124-4L | HellermannTyton |
| 0 | |||
| WA23-244L | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| 1124-4LW24 | HellermannTyton |
| 0 | |||
| MDM-25SH244LH-A174 | ITT Interconnect Solutions |
| 0 | |||
![]() Richardson RFPD | X1005244-LWA3SX10A2 | Kyocera AVX Components | Antenna External 4.5dBi Gain 960MHz/2170MHz/2690MH RoHS : Compliant | 0 | ||
| MA244.LBIC.002 | Taoglas Antenna Solutions | Antenna Genesis -4.90dBi Gain 806MHz/960MHz/1518MH RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | DV402013244LF | INSTOCK | 1,204 | |||
| ESQ-102-44-L-D | Samtec Inc | INSTOCK RoHS : Compliant | 960 | |||
![]() Avnet Abacus | AOM-5244L-R | PUI Audio | (Alt: AOM-5244L-R) RoHS : Compliant | 0 | ||
| ESQ-102-44-L-D | Samtec Inc | (Alt: ESQ-102-44-L-D) RoHS : Compliant | 0 | |||
| 77313-122-44LF | Amphenol Corporation | Conn Unshrouded Header HDR 44 POS 254mm Solder ST ThruHole Poly Bag (Alt: 77313-122-44LF) RoHS : Compliant | 0 | |||
| ESW-102-44-L-S | Samtec Inc | (Alt: ESW-102-44-L-S) RoHS : Compliant | 0 | |||
| POM-2244L-C33-R | PUI Audio | Microphone Omnidirectional 50 Hz to 16 kHz 2 VDC to 10 VDC 22 kohm 44 dB 200 A (Alt: POM-2244L-C33-R) RoHS : Compliant | 0 | |||
| X1005244-LWA3SX10A2 | Kyocera AVX Components | (Alt: X1005244-LWA3SX10A2) RoHS : Compliant | 0 | |||
![]() Avnet Asia | CET00244L110021 | Amphenol Corporation | S SOCKET AMPHENOL CET00244L110021 SMT (Alt: CET00244L110021) RoHS : Compliant | 0 | ||
| TLP292-4(4LGBTPE(T | Toshiba America Electronic Components | (Alt: TLP292-4(4LGBTPE(T) RoHS : Compliant | 0 | |||
![]() Avnet Silica | S32M244LCABWKHST | NXP Semiconductors | ARM MCU S32M2 Family S32M24x Series Microcontrollers ARM CortexM4F 32 bit 80 MHz 512 KB (Alt: S32M244LCABWKHST) RoHS : Compliant | 0 | ||
![]() Braemac Americas-Symmetry | X1005244-LWA3SX10A2 | Kyocera AVX Components | 3-in-1 GNSS (Active) / LTE / Wi-Fi Dual Band External antenna, 1m RG174 & CFD-200 cable, SMA & RP-SMA connector RoHS : Compliant |
| 1 | |
| MA244.LBIC.002 | Taoglas Antenna Solutions | MA244 High Temperature Genesis 4in1 GNSS, 2*Cellular, Wi-Fi Adhesive Mount Low-Profile Antenna |
| 0 | ||
![]() EBV Elektronik | CY8C3244LTI-130 | Infineon Technologies AG | (Alt: SP005642079) RoHS : Compliant | 0 | ||
| CY8C4244LQI-443 | Infineon Technologies AG | Processor PSoC 4 RISC 32Bit 48MHz 40Pin QFN EP (Alt: SP005646537) RoHS : Compliant | 0 | |||
| S32M244LCABWKHST | NXP Semiconductors | ARM MCU S32M2 Family S32M24x Series Microcontrollers ARM CortexM4F 32 bit 80 MHz 512 KB (Alt: S32M244LCABWKHST) RoHS : Compliant | 0 | |||
| CY8C3244LTI-130T | Infineon Technologies AG | MCU 8Bit PSoC 8051 CISC 16KB Flash 25V33V5V 68Pin QFN EP TR (Alt: SP005642081) RoHS : Compliant | 0 | |||
| S32M244LCABWKHSR | NXP Semiconductors | (Alt: S32M244LCABWKHSR) RoHS : Compliant | 0 | |||
| CY8C6244LQI-S4D12 | Infineon Technologies AG | (Alt: SP005658461) RoHS : Compliant | 0 | |||
| CY8C6244LQI-S4D62 | Infineon Technologies AG | (Alt: SP005658463) RoHS : Compliant | 0 | |||
| CY8C6244LQQ-S4D92 | Infineon Technologies AG | (Alt: SP005650741) RoHS : Compliant | 0 | |||
| CY8C6244LQI-S4D92 | Infineon Technologies AG | MCU 32Bit PSoC6 ARM CortexM4FARM CortexM0 RISC 256KB Flash 17V to 36V QFN 68Pin Tray (Alt: SP005658467) RoHS : Compliant | 0 | |||
| TLP292-4(4LGBTPE(T | Toshiba America Electronic Components | Optocoupler 1CH Open CollectorOUT 3750Vrms 16Pin SOIC TR (Alt: TLP292-4(4LGBTPE(T) RoHS : Compliant | 0 | |||
![]() Flip Electronics | CY8C4244LQI-443 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 258 | |
| S32M244LCABWKHST | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 160 | ||
| CY8C3244LTI-123 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 3 | ||
![]() Maritex | U74HC244L-D20-T![]() | Unisonic Technologies Co Ltd | Specialty Drivers; U74HC244L-D20-T; UTC |
| 100 | |
![]() Master Electronics | ZL30244LFF7 | Microchip Technology Inc | 6-Input 6-Output Any-Rate Clock Multiplier & Freq Synth RoHS : Compliant |
| 0 | |
| ARC6-16-24.4-LU-LU-3-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ESQ-102-44-L-D | Samtec Inc | .100 PC/104™ Elevated Socket Strip RoHS : Compliant |
| 0 | ||
| ESQ-112-44-L-S | Samtec Inc | .100 PC/104™ Elevated Socket Strip RoHS : Compliant |
| 0 | ||
| ESQ-132-44-L-T-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ARC6-08-24.4-LU-LD-2-1 | Samtec Inc | ACCELERATE SLIM CABLE AS RoHS : Compliant |
| 0 | ||
| E244L | Thomas & Betts | Angle Coupling - Size 3 Inches - Bell Length 3.25 Inches - Angle 5 Degrees - Material Non-Metallic - Bell to Spigot. RoHS : Compliant |
| 0 | ||
| ESW-102-44-L-D-LL | Samtec Inc | .100 ELEVATED SOCKET ST RoHS : Compliant |
| 0 | ||
| ESW-112-44-L-D | Samtec Inc | .100 Elevated Socket Strip RoHS : Compliant |
| 0 | ||
| MRTD-12-24-L-24.4-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ESQ-132-44-L-D-LL-001 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-05-13-L-D-244-LL | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| ESW-132-44-L-D-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ARC6-24-24.4-LU-LD-2-1 | Samtec Inc | ACCELERATE SLIM CABLE AS RoHS : Compliant |
| 0 | ||
| ESQ-102-44-L-S | Samtec Inc | .100 PC/104™ Elevated Socket Strip RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3244LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50. SMC Plug to BNC Male Cable Using RG58 Coax, RoHS. PE3244LF is a SMC plug to BNC male cable using RG58 coax. This Pasternack SMC plug to BNC male cable assembly uses a 50 Ohm SMC for connector 1 and a 50 Ohm BNC for connector 2. Our plug SMC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3244LF SMC plug to BNC male cable assembly is constructed with RG58 coax. | 192 | ||
| PE3W03244LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to 7/16 DIN Male Right Angle Low Loss Cable 36 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable 36 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable 36 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS-36 can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS-36 can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W03244LF/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to 7/16 DIN Male Right Angle Low Loss Cable 60 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable 60 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable 60 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS-60 can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS-60 can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W03244LF/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to 7/16 DIN Male Right Angle Low Loss Cable 12 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable 12 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable 12 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS-12 can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS-12 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS-12 can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0244LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to Reverse Polarity TNC Female Cable Using LMR-240 Coax, LF Solder. PE3C0244LF is a reverse polarity TNC male to reverse polarity TNC female cable using LMR-240 coax. This Pasternack reverse polarity TNC male to reverse polarity TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity male TNC to reverse polarity female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0244LF TNC reverse polarity male to TNC reverse polarity female cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C3244LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm. TNC Male to N Female Cable Using PE-P300LL Coax, LF Solder. PE3C3244LF is a TNC male to N female cable using PE-P300LL coax. This Pasternack TNC male to N female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our male TNC to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3244LF TNC male to N female cable assembly is constructed with PE-P300LL coax. | 0 | |||
| PE3C1244LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Female to N Female Cable Using LMR-400 Coax, LF Solder, RoHS. PE3C1244LF is a N female to N female cable using LMR-400 coax. This Pasternack N female to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1244LF N female to N female cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W18244LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to C Male Cable Using RG213 Coax, LF Solder. PE3W18244LF is a 7/16 DIN male to C male cable using RG213 coax. This Pasternack 7/16 DIN male to C male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm C for connector 2. Our male 7/16 DIN to male C cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18244LF 7/16 DIN male to C male cable assembly is constructed with RG213 coax. | 0 | |||
| PE3W03244LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to 7/16 DIN Male Right Angle Low Loss Cable 24 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable 24 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable 24 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS-24 can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS-24 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS-24 can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W09244LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. 4.3-10 Male to Snap-On 4.3-10 Male Cable Using SPP-250-LLPL Coax with HeatShrink, LF Solder. PE3W09244LF/HS is a 4.3-10 male to 4.3-10 male cable using SPP-250-LLPL coax. This Pasternack 4.3-10 male to 4.3-10 male cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our male 4.3-10 to male 4.3-10 cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W09244LF/HS 4.3-10 male to 4.3-10 male cable assembly is constructed with SPP-250-LLPL coax. | 0 | |||
| PE3W02244LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. N Male to N Female Cable Using RG393 Coax with HeatShrink, LF Solder. PE3W02244LF/HS is a N male to N female cable using RG393 coax. This Pasternack N male to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02244LF/HS N male to N female cable assembly is constructed with RG393 coax. | 0 | |||
| PE3W03244LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to 7/16 DIN Male Right Angle Low Loss Cable 48 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable 48 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable 48 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS-48 can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS-48 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS-48 can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C1244LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Female to N Female Cable Using LMR-400 Coax with HeatShrink, LF Solder. PE3C1244LF/HS is a N female to N female cable using LMR-400 coax. This Pasternack N female to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1244LF/HS N female to N female cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W14244LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to BNC Female Bulkhead Cable Using Tinned RG405 Coax, LF Solder. PE3W14244LF is a BNC female bulkhead to BNC female bulkhead cable using RG405 Tinned coax. This Pasternack BNC female bulkhead to BNC female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our female BNC bulkhead to female BNC bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W14244LF BNC female bulkhead to BNC female bulkhead cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3W03244LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male to 7/16 DIN Male Right Angle Low Loss Cable Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
![]() Teledyne HiRel | 54F244LMQB | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS | 0 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |