252YR-R Price, Verteiler, Stock

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. TRB 3-Slot Solder/Clamp Plug to TRB 3-Lug Solder/Clamp Non-Isolated Bulkhead Jack M17-176-00002 .129 O.D. 24" Cable., Radio frequency assembly TRB 3-Slot solder/clamp plug to TRB 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 .129 O.D. 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Slot solder/clamp plug to TRB 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 .129 O.D. 24" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2252-24 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2252-24 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2252-24 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Slot solder/clamp plug to TRB 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 .129 O.D. 24" cable.

1 : $261.99
25 : $248.89
50 : $235.79
100 : $225.31

PE3C6252-60

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 60 inches. Plenum 7/16 DIN Male Right Angle to NEX10 Male Low PIM Cable 60 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male right angle to NEX10 male low PIM cable 60 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male right angle to NEX10 male low PIM cable 60 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-RA-LP 7/16 DIN to TC-250-NX10M-LP NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle TC-SPP250-716M-RA-LP 7/16 DIN cable connection on one end and TC-250-NX10M-LP NEX10 cable connection on the other. Our low PIM right angle TC-SPP250-716M-RA-LP 7/16 DIN to TC-250-NX10M-LP NEX10 cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-716M-RA-LP 7/16 DIN to TC-250-NX10M-LP NEX10 cable is a male to male coax assembly, PE3C6252-60, can also be known as a low PIM right angle TC-SPP250-716M-RA-LP 7/16 DIN plug to TC-250-NX10M-LP NEX10 plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-RA-LP 7/16 DIN plug to TC-250-NX10M-LP NEX10 plug cable assembly PE3C6252-60 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-RA-LP 7/16 DIN cable assembly is manufactured with right angle TC-SPP250-716M-RA-LP 7/16 DIN to TC-250-NX10M-LP NEX10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-RA-LP 7/16 DIN right angle male to TC-250-NX10M-LP NEX10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6252-60 can also be used in the other direction and will be TC-250-NX10M-LP NEX10 male to right angle TC-SPP250-716M-RA-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-RA-LP 7/16 DIN right angle plug to TC-250-NX10M-LP NEX10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-RA-LP 7/16 DIN to TC-250-NX10M-LP NEX10 cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-RA-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male right angle to NEX10 male low PIM cable 60 inch length using SPP-250-LLPL coax using Times Microwave parts.

1 : $161.99
25 : $153.89
50 : $145.79
100 : $139.31

PE3W25252

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to SMA Male Cable Using LMR-240-DB Coax. PE3W25252 is a TNC male right angle to SMA male cable using LMR-240-DB coax. This Pasternack TNC male right angle to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25252 TNC male right angle to SMA male cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems.

PE34252LF

Pasternack Enterprises

PE34252LF-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Female Bulkhead Cable 36 Inch Length Using PE-SR402AL Coax., Radio frequency assembly SMA male to SMA female bulkhead cable 36 inch length using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead cable 36 inch length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE34252LF-36, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE34252LF-36 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34252LF-36 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable 36 inch length using PE-SR402AL coax.

1 : $94.99
25 : $90.24
50 : $85.49
100 : $81.69

PE36525-24

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 24 inches. 1.85mm Male to 1.85mm Male Cable 24 Inch Length Using PE-SR405FL Coax., Radio frequency assembly 1.85mm male to 1.85mm male cable 24 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 24 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE36525-24, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE36525-24 is built with PE-SR405FL which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 24 inch length using PE-SR405FL coax.

1 : $319.99
25 : $303.99
50 : $287.99

PE3C1252

Pasternack Enterprises

PE3C8252-48

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 48 inches. 4.3-10 Male Right Angle to 7/16 DIN Male Right Angle Low PIM Cable 48 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to 7/16 DIN male right angle low PIM cable 48 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male right angle to 7/16 DIN male right angle low PIM cable 48 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.3-10 cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low PIM right angle 4.3-10 to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a male to male coax assembly, PE3C8252-48, can also be known as a low PIM right angle 4.3-10 plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C8252-48 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 right angle male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8252-48 can also be used in the other direction and will be right angle 7/16 DIN male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male right angle to 7/16 DIN male right angle low PIM cable 48 inch length using TFT-402 coax using Times Microwave components.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

PE3W12524

Pasternack Enterprises

PE3W25205

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to Jack Cable Using RG188-DS Coax. PE3W25205 is a SMA female bulkhead to FAKRA jack cable using RG188-DS coax. This Pasternack SMA female bulkhead to FAKRA jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm FAKRA for connector 2. Our female SMA bulkhead to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25205 SMA female bulkhead to FAKRA jack cable assembly is constructed with RG188-DS coax.

PE3W25250

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to MMCX Jack Cable Using PE-047SR Tan Coax. PE3W25250 is a SMA female bulkhead to MMCX jack cable using PE-047SR coax. This Pasternack SMA female bulkhead to MMCX jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MMCX for connector 2. Our female SMA bulkhead to jack MMCX cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W25250 SMA female bulkhead to MMCX jack cable assembly is constructed with PE-047SR coax.

PE3W25287

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMB Plug Right Angle Cable Using RG142 Coax. PE3W25287 is a SMA female bulkhead to SMB plug right angle cable using RG142 coax. This Pasternack SMA female bulkhead to SMB plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. SMA to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA bulkhead to plug SMB right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25287 SMA female bulkhead to SMB plug right angle cable assembly is constructed with RG142 coax.

PE3C2525/HS

Pasternack Enterprises

PE3W09252/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Reverse Polarity Push-On MCX Plug Right Angle Cable Using RG316 Coax with HeatShrink. PE3W09252/HS is a SMA male right angle to reverse polarity MCX plug right angle cable using RG316 coax. This Pasternack SMA male right angle to reverse polarity MCX plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. SMA right angle to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to reverse polarity plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09252/HS SMA male right angle to MCX reverse polarity plug right angle cable assembly is constructed with RG316 coax.

PE3W14252

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to TNC Female Bulkhead Cable Using PE-SR402FL Coax. PE3W14252 is a SMA male right angle to TNC female bulkhead cable using PE-SR402FL coax. This Pasternack SMA male right angle to TNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female TNC bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W14252 SMA male right angle to TNC female bulkhead cable assembly is constructed with PE-SR402FL coax.

TE Connectivity

2825212-1

TE Connectivity

VAL-U-LOK PIN HCS TN 22-18 LP Contact Mating Area Plating Material: Tin (Sn) Contact Type: Pin Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 22 – 18 AWG Operating Voltage: 600 VAC Tin (Sn) Pin Pre-Tin 22 – 18 AWG | Connector Contact | Part Number: 2825212-1 | Internal Number: 2825212-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.09
100 : $0.12
25 : $0.18
10 : $0.21
1 : $0.23

12,563

MSLPT5252AG3TR

TE Connectivity

TACT MINI GW 5.2X5.2X0.8 160GF SPST-NO Contact Current Rating: 50 mA Actuator Style: Flush, Top Actuator Operating Function: NO Contact Base Material: Stainless Steel Switch Contact Plating Material: Silver Tactile Switch | 50 mA Flush, Top Actuator Stainless Steel | Part Number: MSLPT5252AG3TR | Internal Number: 2337236-2 | TE Connectivity
RoHS : Compliant

2,500 : $0.53
1,000 : $0.54
500 : $0.56
250 : $0.57
100 : $0.58
50 : $0.6
25 : $0.61
10 : $0.63
1 : $0.64

11,333

2825261-6

TE Connectivity

6P VAL-U-LOK HCS VRT HDR W/P V0 PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 6 | PCB Header & Receptacle | Part Number: 2825261-6 | Internal Number: 2825261-6 | TE Connectivity
RoHS : Compliant

1,000 : $0.53
100 : $0.71
25 : $0.82
10 : $0.93
1 : $1.03

2,194

2842529-8

TE Connectivity

8P TB HDR VT (180) 2.50, GN Number of Positions: 8 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .98 in Centerline (Pitch): 2.5 mm Push-In PCB Terminal Blocks: Time Saving Connector | 8 Header Wire-to-Board .98" | Part Number: 2842529-8 | Internal Number: 2842529-8 | .98" | TE Connectivity
RoHS : Compliant

10,000 : $1.54
5,000 : $1.58
2,500 : $1.61
1,000 : $1.65
500 : $1.68
250 : $1.72
100 : $1.75
50 : $1.78
25 : $1.82
10 : $1.85
1 : $1.89

2,002

3627322520680K

TE Connectivity

3627 322520 68UH 10% Inductance: 68 µH Current Rating (Max): 80 mA DC Resistance: 5.5 Ω Passive Component Tolerance: 10 % Shielded: No Power Inductor | 68 µH 80 mA 5.5 Ω 10 % | Part Number: 3627322520680K | Internal Number: 2-2176636-3 | TE Connectivity
RoHS : Compliant

500 : $0.81
250 : $0.84
100 : $0.86
50 : $0.89
25 : $0.92
10 : $0.95
1 : $0.97

1,000

36273225204R7K

TE Connectivity

3627 322520 4R7 10% Inductance: 4.7 µH Current Rating (Max): 270 mA DC Resistance: 1.2 Ω Passive Component Tolerance: 10 % Shielded: No Power Inductor | 4.7 µH 270 mA 1.2 Ω 10 % | Part Number: 36273225204R7K | Internal Number: 2176636-9 | TE Connectivity
RoHS : Compliant

500 : $0.81
250 : $0.84
100 : $0.86
50 : $0.89
25 : $0.92
10 : $0.95
1 : $0.97

1,000

2-2825261-0

TE Connectivity

20P VAL-U-LOK HCS VRT HDR W/P V0 PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 20 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 20 | PCB Header & Receptacle | Part Number: 2-2825261-0 | Internal Number: 2-2825261-0 | TE Connectivity
RoHS : Compliant

1,000 : $1.24
100 : $1.67
25 : $1.94
10 : $2.2
1 : $2.42

403

202K142-25/225-0

TE Connectivity

202K142-25/225-0 Body Orientation: Straight Molded Part Shape Code: 202 Lipped: Yes Material Code: 25 Material Systems Code: 25 Heat Shrink Boot | Straight 202 25 | Part Number: 202K142-25/225-0 | Internal Number: 864607-000 | Alias Number: 7-1196733-0 | TE Connectivity
RoHS : Compliant

1 : $24.05

361

1571625-2

TE Connectivity

TACT,6X6,SMT,J-LEAD,50GF,T&R SPST-NO Contact Current Rating: 50 mA Actuator Style: Round Actuator Operating Function: NO Contact Base Material: Stainless Steel Switch Contact Plating Material: Silver Tactile Switch | 50 mA Round Actuator Stainless Steel | Part Number: 1571625-2 | Internal Number: 1571625-2 | TE Connectivity
RoHS : Compliant

5,000 : $1.0
2,500 : $1.02
1,000 : $1.05
500 : $1.07
250 : $1.1
100 : $1.12
50 : $1.15
25 : $1.17
10 : $1.19
1 : $1.22

357

1-2842528-2

TE Connectivity

12P Spring TB Plug 2.50, GN Number of Positions: 12 Terminal Block Connector Type: Plug Connector System: Wire-to-Board Centerline (Pitch): .98 in Centerline (Pitch): 2.5 mm Push-In PCB Terminal Blocks: Time Saving Connector | 12 Plug Wire-to-Board .98" | Part Number: 1-2842528-2 | Internal Number: 1-2842528-2 | .98" | TE Connectivity
RoHS : Compliant

1,000 : $6.17
500 : $6.35
250 : $6.54
100 : $6.73
50 : $6.92
25 : $7.1
10 : $7.29
1 : $7.48

200

AV2520M524Q04

TE Connectivity

AV25 DPM 3A MOVING RING POWER YELLOW 24V Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: Momentary Configuration (Pole-Throw): Double Pole - Single Throw Number of Actuators: Single Anti-Vandal Switch With Momentary Double Pole - Single Throw | Pushbutton Switch | Part Number: AV2520M524Q04 | Internal Number: 2-2317658-3 | TE Connectivity
RoHS : Compliant

50 : $44.58
25 : $47.2
10 : $49.82
1 : $52.44

AV2520E612Q04

TE Connectivity

AV25 DPM 3A MOVING RING GREEN 12V Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: Momentary Configuration (Pole-Throw): Double Pole - Single Throw Number of Actuators: Single Anti-Vandal Switch With Momentary Double Pole - Single Throw | Pushbutton Switch | Part Number: AV2520E612Q04 | Internal Number: 2-2317656-7 | TE Connectivity
RoHS : Compliant

50 : $42.71
25 : $45.22
10 : $47.73
1 : $50.24

AV2521E512Q04

TE Connectivity

AV25 DPL 3A MOVING RING YELLOW 12V Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: On Off Configuration (Pole-Throw): Double Pole - Single Throw Number of Actuators: Single Anti-Vandal Switch With On Off Double Pole - Single Throw | Pushbutton Switch | Part Number: AV2521E512Q04 | Internal Number: 3-2317656-5 | TE Connectivity
RoHS : Compliant

50 : $42.71
25 : $45.22
10 : $47.73
1 : $50.24

AV2520M624Q04

TE Connectivity

AV25 DPM 3A MOVING RING POWER GREEN 24V Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: Momentary Configuration (Pole-Throw): Double Pole - Single Throw Number of Actuators: Single Anti-Vandal Switch With Momentary Double Pole - Single Throw | Pushbutton Switch | Part Number: AV2520M624Q04 | Internal Number: 2-2317658-4 | TE Connectivity
RoHS : Compliant

50 : $44.58
25 : $47.2
10 : $49.82
1 : $52.44

382W042-25/225-0

TE Connectivity

382W042-25/225-0 Molded Part Shape: Y Shape Number of Branches: 3 Material Code: 25 Material Systems Code: 25 Adhesive Requirement: Adhesive Precoat Y Shape 3 25 | Heat Shrinkable Cable Breakout And Cable Transition | Part Number: 382W042-25/225-0 | Internal Number: 831991-000 | Alias Number: 4-1196496-1 | TE Connectivity
RoHS : Compliant

1 : $74.44

Teledyne HiRel

54ACT2525LMQB

Teledyne HiRel

CLOCK DRIVER, MINIMUM SKEW

54ACT2525FMQB

Teledyne HiRel

CLOCK DRIVER, MINIMUM SKEW

54ACT2525DMQB

Teledyne HiRel

CLOCK DRIVER, MINIMUM SKEW

Venkel Ltd.

MELFC0102-UE-8252DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�25PPM;82.5K;�0.5%
RoHS : Compliant

MELFC0204-TC-8252BT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;82.5K;�0.1%
RoHS : Compliant

HPTF0603-QN-8252DT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�10PPM;82.5K;�0.5%
RoHS : Compliant

RMPI322520CX-391JT

VENKEL LTD

Rect Min Power Inductor;322520;Choke;Std;390uH;�5%
RoHS : Compliant

RMPI322520CX-561KT

VENKEL LTD

Rect Min Power Inductor;322520;Choke;Std;560uH;�10%
RoHS : Compliant

RMPI322520GX-331JT

VENKEL LTD

Rect Min Power Inductor;322520;General;Std;330uH;�5%
RoHS : Compliant

PWCR0805-RK-8252FT

VENKEL LTD

Pulse Withstanding CR;0805;1/8W;�100PPM;82.5K;�1%
RoHS : Compliant

NL252018-1R5JT

VENKEL LTD

Wire Wound Chip Inductor;1008;1.5uH;�5%
RoHS : Compliant

NL252018-R12MT

VENKEL LTD

Wire Wound Chip Inductor;1008;0.12uH;�20%
RoHS : Compliant

NL252018-R33JT

VENKEL LTD

Wire Wound Chip Inductor;1008;0.33uH;�5%
RoHS : Compliant

NL322522-4R7MT

VENKEL LTD

Wire Wound Chip Inductor;3225;4.7uH;�20%
RoHS : Compliant

NL322522-R10MT

VENKEL LTD

Wire Wound Chip Inductor;3225;0.100uH;�20%
RoHS : Compliant

NL322522-R47MT

VENKEL LTD

Wire Wound Chip Inductor;3225;0.470uH;�20%
RoHS : Compliant

NL322522-R68JT

VENKEL LTD

Wire Wound Chip Inductor;3225;0.68uH;�5%
RoHS : Compliant

RMPI252012GE-1R0MT

VENKEL LTD

Rect Min Power Inductor;252012;General;Epoxy;1uH;�20%
RoHS : Compliant

Waytek, Inc.

145252-91

General Cable Technologies Corporation

22GA TXL Blue Cross-Link Automotive Wire XLPE -51C to 125C

500 : $0.0604
1,000 : $0.0532
3,000 : $0.0427
15,000 : $0.0388

121,500

72525

Delfingen Industry

Delfingen 72525 NU-GUARD SC-P 10 Self Closing SAE Braided Sleeving is black 9-10mm PET sleeving on a 1,250' spool. It features self-closing construction with at least 90 degree overlap, knitted monofilament and multifilament texture for abrasion resistance and drainage, and easy re-entry for harness rework without disconnecting components.

1,250 : $0.571
6,250 : $0.5221

17,500

72523

Delfingen Industry

Delfingen 72523 NU-GUARD SC-P 05 Self Closing SAE Braided Sleeving is black 1-5mm PET sleeving on a 2,000' spool. It features self-closing construction with at least 90 degree overlap, knitted monofilament and multifilament texture for abrasion resistance and drainage, and easy re-entry for harness rework without disconnecting components.

2,000 : $0.407
10,000 : $0.3722

14,000

72527

Delfingen Industry

Delfingen 72527 NU-GUARD SC-P 16 Self Closing SAE Braided Sleeving is black 14-16mm PET sleeving on a 700' spool. It features self-closing construction with at least 90 degree overlap, knitted monofilament and multifilament texture for abrasion resistance and drainage, and easy re-entry for harness rework without disconnecting components.

700 : $0.8896
3,500 : $0.8137

4,200

72528

Delfingen Industry

Delfingen 72528 NU-GUARD SC-P 29 Self Closing SAE Braided Sleeving is black 26-29mm PET sleeving on a 300' spool. It features self-closing construction with at least 90 degree overlap, knitted monofilament and multifilament texture for abrasion resistance and drainage, and easy re-entry for harness rework without disconnecting components.

300 : $1.3167
1,500 : $1.2043

2,700

72529

Delfingen Industry

Delfingen 72529 NU-GUARD SC-P 32 Self Closing SAE Braided Sleeving is black 30-32mm PET sleeving on a 250' spool. It features self-closing construction with at least 90 degree overlap, knitted monofilament and multifilament texture for abrasion resistance and drainage, and easy re-entry for harness rework without disconnecting components.

250 : $1.478
1,250 : $1.3518

1,750

T250XL0X2 111-25200

HellermannTyton

HellermannTyton T250XL0X2 heavy-duty cable tie is a 40" long high-strength tie built for securing large wire bundles, hoses, and tubing. Its one-piece self-locking design supports fast installation and dependable hold in demanding electrical, industrial, and harness-routing applications.

25 : $3.1494
50 : $2.6266
100 : $2.4792
200 : $2.3184
500 : $2.2247

775

TPS252525

Thomas & Betts

Thomas & Betts Harnessflex TPS252525 hinged tee fitting is a conduit branch fitting with .750" left, center, and right openings for corrugated loom routing. Its hinged tee design supports clean three-way harness branching while maintaining organized conduit protection in vehicle and equipment wiring applications.

1 : $5.7138
50 : $5.0932
100 : $4.6224
200 : $4.4726
500 : $4.3228
1,000 : $4.1516

290

174-S2-225-2

225A Manual Reset 3/8" Studs Surface Mount Circuit Breaker HI AMP TYPE III series17new

1 : $37.42
5 : $35.27
10 : $34.1
50 : $32.55
100 : $30.98

105

171-S2-225-2

225A Auto Reset 3/8" Studs Surface Mount Circuit Breaker HI AMP TYPE I Series17new

1 : $35.7
5 : $31.87
10 : $29.86
50 : $28.2
100 : $26.86
200 : $25.53

53252-3

Grote Industries Inc

Red Stop-Tail-Turn LED Light 4" Round 10 LED 12V .24V US 40 GROTE 53252-3