2B1W3-R Price, Verteiler, Stock

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to White FAKRA Plug Cable 12 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly SMA male to white FAKRA plug cable 12 inch length using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to white FAKRA plug cable 12 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and FAKRA cable connection on the other. Our low loss SMA to FAKRA cable assemblies have a male gender on end 1 and plug on end 2. This SMA to FAKRA cable is a male to plug coax assembly, PE39342B-12, can also be known as a low loss SMA plug to FAKRA male cable assembly and will be shipped same-day as it is purchased. SMA plug to FAKRA male cable assembly PE39342B-12 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to FAKRA plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39342B-12 can also be used in the other direction and will be FAKRA plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to FAKRA male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to white FAKRA plug cable 12 inch length using PE-C100-LSZH coax.

1 : $36.99
25 : $35.14
50 : $33.29
100 : $31.81

205

PE9852B-15

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-42, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Waveguide Standard Gain Horn Antenna Operating From 18 GHz to 26.5 GHz With a Nominal 15 dBi Gain With UG-597/U Square Cover Flange. Pasternack’s PE9852B-15 WR-42 waveguide horn is also known as a waveguide horn antenna. This WR-42 standard gain horn waveguide antenna has a nominal gain of 15 dBi. Our waveguide horn can operate at frequencies ranging from 18 to 26.5 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 15 dBi waveguide horn from Pasternack has an overall length of 2.37 inches, a width of 1.14 inches, and a weight of 0.09 lbs. Our antenna comes with a UG-597/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-42 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-42 waveguide horn antenna with 15 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,070.0
5 : $1,027.2
10 : $984.4
25 : $941.6

PEW42B100

Pasternack Enterprises

Key Specifications, Type of Bend: H-Bend, Waveguide Size 1: WR-42, Flange Size 1: UG-595/U, Waveguide Size 2: WR-42, Flange Size 2: UG-595/U, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Waveguide H-Bend with UG-595/U Flange Operating from 18 GHz to 26.5 GHz. PEW42B100 is a WR-42 waveguide bend that is a H-Bend type with a UG-595/U flange. Our WR-42 waveguide bend has a minimum frequency of 18 GHz and a maximum frequency of 26.5 GHz. WR42 waveguide bend PEW42B100 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This WR42 H-Bend waveguide with UG-595/U flange can ship worldwide the same day as it is purchased as with our other available RF parts.

1 : $575.0
10 : $552.0
25 : $529.0
100 : $506.0

PE9862B-10

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-229, Frequency, Min: 3.3 GHz, Frequency, Max: 4.9 GHz. WR-229 Standard Gain Horn Antenna Operating From 3.3 GHz to 4.9 GHz, 10 dBi Nominal Gain, CMR-229 Flange, ProLine. Pasternack’s PE9862B-10 WR-229 waveguide horn is also known as a waveguide horn antenna. This WR-229 standard gain horn waveguide antenna has a nominal gain of 10 dBi. Our waveguide horn can operate at frequencies ranging from 3.3 to 4.9 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 10 dBi waveguide horn from Pasternack has an overall length of 6 inches, a width of 3.44 inches, and a weight of 0.05 lbs. Our antenna comes with a cmr-229 flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-229 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-229 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,230.0
5 : $1,180.8
10 : $1,131.6
25 : $1,082.4

PE9852B-10

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-42, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Waveguide Standard Gain Horn Antenna Operating From 18 GHz to 26.5 GHz With a Nominal 10 dBi Gain With UG-597/U Square Cover Flange. Pasternack’s PE9852B-10 WR-42 waveguide horn is also known as a waveguide horn antenna. This WR-42 standard gain horn waveguide antenna has a nominal gain of 10 dBi. Our waveguide horn can operate at frequencies ranging from 18 to 26.5 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. Our antenna comes with a UG-597/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-42 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-42 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,290.0
5 : $1,238.4
10 : $1,186.8
25 : $1,135.2

PEW42B101

Pasternack Enterprises

Key Specifications, Type of Bend: E-Bend, Waveguide Size 1: WR-42, Flange Size 1: UG-595/U, Waveguide Size 2: WR-42, Flange Size 2: UG-595/U, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Instrumentation Grade Waveguide E-Bend with UG-595/U Flange Operating from 18 GHz to 26.5 GHz. PEW42B101 is a WR-42 waveguide bend that is a E-Bend type with a UG-595/U flange. This WR-42 E-Bend waveguide with UG-595/U flange from Pasternack is instrumentation grade. Our WR-42 instrumentation grade waveguide bend has a minimum frequency of 18 GHz and a maximum frequency of 26.5 GHz. WR-42 waveguide bend PEW42B101 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This instrumentation grade WR-42 E-Bend waveguide with UG-595/U flange can ship worldwide the same day as it is purchased as with our other available RF parts.

1 : $740.0
10 : $710.4
25 : $680.8
100 : $651.2

PE9862B-15

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-229, Frequency, Min: 3.3 GHz, Frequency, Max: 4.9 GHz. WR-229 Waveguide Standard Gain Horn Antenna, 3.3 GHz to 4.9 GHz Frequency Range, 15 dBi Gain, Flange. Pasternack’s PE9862B-15 WR-229 waveguide horn is also known as a waveguide horn antenna. This WR-229 standard gain horn waveguide antenna has a nominal gain of 15 dBi. Our waveguide horn can operate at frequencies ranging from 3.3 to 4.9 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 15 dBi waveguide horn from Pasternack has an overall length of 11.08 inches, a width of 6.12 inches, and a weight of 0.05 lbs. Our antenna comes with a cmr-229 flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-229 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-229 waveguide horn antenna with 15 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,400.0
5 : $1,344.0
10 : $1,288.0
25 : $1,232.0

PEW22B101

Pasternack Enterprises

Key Specifications, Type of Bend: E-Bend, Waveguide Size 1: WR-22, Flange Size 1: UG-383/U, Waveguide Size 2: WR-22, Flange Size 2: UG-383/U, Frequency, Min: 33 GHz, Frequency, Max: 50 GHz. WR-22 Waveguide E-Bend with UG-383/U Flange Operating from 33 GHz to 50 GHz. PEW22B101 is a WR-22 waveguide bend that is a E-Bend type with a UG-383/U flange. Our WR-22 waveguide bend has a minimum frequency of 33 GHz and a maximum frequency of 50 GHz. WR-22 waveguide bend PEW22B101 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This WR-22 E-Bend waveguide with UG-383/U flange can ship worldwide the same day as it is purchased as with our other available RF parts.

1 : $393.99
10 : $378.23
25 : $362.47
100 : $346.71

PE9862B-10-CPRG

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-229, Frequency, Min: 3.3 GHz, Frequency, Max: 4.9 GHz. WR-229 Waveguide Standard Gain Horn Antenna Operating From 3.3 GHz to 4.9 GHz With a Nominal 10 dB Gain With CPRG Flange. Pasternack’s PE9862B-10-CPRG WR-229 waveguide horn is also known as a waveguide horn antenna. This WR-229 standard gain horn waveguide antenna has a nominal gain of 10 dBi. Our waveguide horn can operate at frequencies ranging from 3.3 to 4.9 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 10 dBi waveguide horn from Pasternack has an overall length of 3.63 inches, a width of 2.68 inches, and a weight of 0.34 lbs. Our antenna comes with a cprg flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-229 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-229 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,790.0
5 : $1,754.2
10 : $1,718.4
25 : $1,682.6

PE9862B-15-CPRG

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-229, Frequency, Min: 3.3 GHz, Frequency, Max: 4.9 GHz. WR-229 Waveguide Standard Gain Horn Antenna Operating From 3.3 GHz to 4.9 GHz With a Nominal 15 dB Gain With CPRG Flange. Pasternack’s PE9862B-15-CPRG WR-229 waveguide horn is also known as a waveguide horn antenna. This WR-229 standard gain horn waveguide antenna has a nominal gain of 15 dBi. Our waveguide horn can operate at frequencies ranging from 3.3 to 4.9 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 15 dBi waveguide horn from Pasternack has an overall length of 6.31 inches, a width of 4.73 inches, and a weight of 0.81 lbs. Our antenna comes with a cprg flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-229 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-229 waveguide horn antenna with 15 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,030.0
5 : $1,989.4
10 : $1,948.8
25 : $1,908.2

PEW22B100

Pasternack Enterprises

Key Specifications, Type of Bend: H-Bend, Waveguide Size 1: WR-22, Flange Size 1: UG-383/U, Waveguide Size 2: WR-22, Flange Size 2: UG-383/U, Frequency, Min: 33 GHz, Frequency, Max: 50 GHz. WR-22 Waveguide H-Bend with UG-383/U Flange Operating from 33 GHz to 50 GHz. PEW22B100 is a WR-22 waveguide bend that is a H-Bend type with a UG-383/U flange. Our WR-22 waveguide bend has a minimum frequency of 33 GHz and a maximum frequency of 50 GHz. WR22 waveguide bend PEW22B100 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This WR-22 H-Bend waveguide with UG-383/U flange can ship worldwide the same day as it is purchased as with our other available RF parts.

1 : $285.99
10 : $274.55
25 : $263.11
100 : $251.67