321613-R22K Price, Verteiler, Stock

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. White FAKRA Plug to FAKRA Jack Low Loss Cable 60 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly white FAKRA plug to FAKRA jack low loss cable 60 inch length using PE-C100-LSZH coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The White FAKRA plug to FAKRA jack low loss cable 60 inch length using PE-C100-LSZH coax, FAKRA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our low loss FAKRA to FAKRA cable assemblies have a plug gender on end 1 and jack on end 2. This FAKRA to FAKRA cable is a plug to jack coax assembly, PE3C6321-60, can also be known as a low loss FAKRA male to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA male to FAKRA female cable assembly PE3C6321-60 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA plug to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6321-60 can also be used in the other direction and will be FAKRA jack to FAKRA plug cable assembly if the opposite connectivity is required. Low loss FAKRA male to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this white FAKRA plug to FAKRA jack low loss cable 60 inch length using PE-C100-LSZH coax.

1 : $66.39
25 : $63.07
50 : $59.75
100 : $57.1

188

PE3216-48

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male to 7/16 DIN Male Cable 48 Inch Length Using RG142 Coax., Radio frequency assembly N male to 7/16 DIN male cable 48 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN male cable 48 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our type N to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE3216-48, can also be known as a N type plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN plug cable assembly PE3216-48 is built with RG142 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3216-48 can also be used in the other direction and will be 7/16 DIN male to N type male cable assembly if the opposite connectivity is required. N type plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male cable 48 inch length using RG142 coax.

1 : $149.99
25 : $142.49
50 : $134.99
100 : $128.99

112

PE3216LF-24

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male to 7/16 DIN Male Cable 24 Inch Length Using RG142 Coax, RoHS., Radio frequency assembly N male to 7/16 DIN male cable 24 inch length using RG142 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN male cable 24 inch length using RG142 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and 7/16 DIN cable connection on the other. Our type N to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE3216LF-24, can also be known as a type N plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. N type plug to 7/16 DIN plug cable assembly PE3216LF-24 is built with RG142 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3216LF-24 can also be used in the other direction and will be 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Type N plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male cable 24 inch length using RG142 coax, RoHS.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

112

PE3216LF-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to 7/16 DIN Male Cable 12 Inch Length Using RG142 Coax, RoHS., Radio frequency assembly N male to 7/16 DIN male cable 12 inch length using RG142 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN male cable 12 inch length using RG142 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our N type to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE3216LF-12, can also be known as a N type plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN plug cable assembly PE3216LF-12 is built with RG142 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this N type male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3216LF-12 can also be used in the other direction and will be 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Type N plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male cable 12 inch length using RG142 coax, RoHS.

1 : $139.99
25 : $132.99
50 : $125.99
100 : $120.39

112

PE3216LF-72

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 72 inches. N Male to 7/16 DIN Male Cable 72 Inch Length Using RG142 Coax, RoHS., Radio frequency assembly N male to 7/16 DIN male cable 72 inch length using RG142 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN male cable 72 inch length using RG142 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our N type to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE3216LF-72, can also be known as a type N plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. N type plug to 7/16 DIN plug cable assembly PE3216LF-72 is built with RG142 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3216LF-72 can also be used in the other direction and will be 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Type N plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male cable 72 inch length using RG142 coax, RoHS.

1 : $154.99
25 : $147.24
50 : $139.49
100 : $133.29

112

PEWGA3216

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-28, Frequency Band: Ka, Input Flange Size Equivalent: UG-599/U, VSWR, In Typ: 1.5:1, Input Power, Max (CW): 5 dBm, Saturated Output Power, Typ: 34 dBm, Gain, Typical: 35 dB, Minimum Frequency: 26.5 GHz, Maximum Frequency: 40 GHz, Body Material: Aluminum, Body Plating: Gold, Length: 1.5 in, Width: 1.5 in, Height: 1.7 in, Weight: 0.05 lbs, Current, DC Typ: 4,800 mA, Voltage, DC Typ: 6 V. WR-28 Waveguide Power Amplifier, Ka Band, 26.5 to 40 GHz, 35 dB Gain, 34 dBm Psat, UG-599/U Flange. The WR-28 waveguide power amplifier PEWGA3216 from Pasternack is part of our extensive RF power amplifier selection that we offer with global same-day shipping. The 4,800 mA WR-28 high frequency RF power amp is designed for high reliability for many applications with its WR-28 I/O waveguide ports that match UG-599/U waveguide flanges. Our WR-28 high reliability Ka band waveguide power amplifier has a typical VSWR of 1.5:1. Our radio frequency 5 dBm waveguide power amplifier is constructed for a minimum frequency of 26.5 GHz and a maximum frequency of 40 GHz. Pasternack's PEWGA3216 waveguide RF amp is housed in aluminum and plated with gold, which makes for a sturdy and reliable unit. This 40 GHz Ka band WR-28 waveguide power amplifier is rated for amplifying properly at extreme temperatures that can range from -10° degrees Celsius up to 45° degrees Celsius. Pasternack also stocks a wide selection of other radio frequency power amplifier products that ship same day from our certified facility for all your RF, microwave and millimeter wave amplifier component needs.

1 : $19,300.0
5 : $18,528.0
10 : $17,756.0
25 : $16,984.0

PE7321-6

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.6:1, Attenuation: 6 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 6 dB Fixed Attenuator, 7/16 DIN Female To N Female Directional Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 18 GHz. PE7321-6 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a female gender on side 1 and a type N female connector on side 2. The Pasternack PE7321-6 6 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7321-6 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $674.99
10 : $647.99
25 : $620.99

PE34321-6

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-034SR, RF Cable Type: PE-034SR, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 6 Inch Length Using PE-034SR Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 6 inch length using PE-034SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 6 inch length using PE-034SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE34321-6, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE34321-6 is built with PE-034SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34321-6 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 6 inch length using PE-034SR coax.

1 : $222.99
25 : $211.84
50 : $200.69

PE3573-216

Pasternack Enterprises

1 : $205.99
25 : $195.69
50 : $185.39
100 : $177.15

PE3C4321-6

Pasternack Enterprises

1 : $169.99
25 : $161.49
50 : $152.99
100 : $146.19

PE3C8321-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to N Female Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male to N female low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to N female low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM 7/16 DIN to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8321-60 can also be known as a low PIM 7/16 DIN plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8321-60 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 7/16 DIN male to type N female cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N jack cable assembly PE3C8321-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8321-60 can also be used in the other direction and will be a type N female to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements.

1 : $63.19
25 : $60.03
50 : $56.87
100 : $54.34

PE3C3216

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: Trimmed Lead, Connector Gender 2: Sexless, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 0, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75. SHV Plug to Unterminated Lead Cable Using 75 Ohm RG59 Coax. PE3C3216 is a SHV plug to Trimmed Lead sexless cable using RG59 coax. This Pasternack SHV plug to Trimmed Lead sexless cable assembly uses a 50 Ohm SHV for connector 1 and a Trimmed Lead for connector 2. Our plug SHV to sexless Trimmed Lead cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3C3216 SHV plug to Trimmed Lead sexless cable assembly is constructed with RG59 coax.

PE3W13216LF

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Cable Using LMR-LW195 Coax, LF Solder. PE3W13216LF is a BNC male to SMA male cable using LMR-LW195 coax. This Pasternack BNC male to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13216LF BNC male to SMA male cable assembly is constructed with LMR-LW195 coax, * LMR™ is a trademark of Times Microwave Systems.

Vyrian

RC3216J301CS

Samsung Electro-Mechanics

Fixed Resistor, Metal Glaze/thick Film, 0.25W, 300ohm, 200V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 1206
RoHS : Compliant

13,731

2321648

Phoenix Contact

Cable Assembly, 40 Conductor(s), 26AWG, 60V, Flexible Cord And Fixture Wire
RoHS : Compliant

9,204

LTC3216EDE-TRPBF

Analog Devices Inc

9,035

SAS3216 I/O CONTROLLER

Broadcom Limited

7,936

R33216FNSR

Texas Instruments

7,044

KTZ043216

Kingston Technology Company

6,358

BCM3216KFBG

Broadcom Limited

5,467

LMK5C33216ARGCR

Texas Instruments

RoHS : Compliant

5,155

QMGA-13216-TR1G

Broadcom Limited

5,060

3-1532165-3

TE Connectivity

D Microminiature Connector, 4 Contact(s), Receptacle
RoHS : Compliant

4,714

2321693

Phoenix Contact

Cable Assembly, 40 Conductor(s), 26AWG, 60V, Flexible Cord And Fixture Wire
RoHS : Compliant

4,233

MT4VR3216AG-840XX

Micron Technology Inc

Rambus DRAM Module, 32MX16, CMOS

2,948

232-166/039-000

WAGO Innovative Connections

Barrier Strip Terminal Block
RoHS : Compliant

684

M22759/32-16-96

Defense Logistics Agency

Wire And Cable, 1 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire

635

153216-2000-RB

3m Electronic Products Division

Board Connector, 16 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket

282

Win Source Electronics

RFECA3216060A1T

Walsin Technology Corporation

2.4GHZ CERAMIC CHIP ANTENNA

8,380 : $0.0358
6,270 : $0.0399
4,845 : $0.0413
3,515 : $0.0427
2,270 : $0.0441
935 : $0.0537

990,000

C3216X7S2A225K160AB

TDK Corporation

CAP CER 2.2UF 100V X7S 1206
RoHS : Compliant

3,050 : $0.0985
2,275 : $0.1099
1,760 : $0.1137
1,280 : $0.1175
825 : $0.1213
340 : $0.1478

464,300

C3216X7R1C106K160AC

TDK Corporation

CAP CER 10UF 16V X7R 1206
RoHS : Compliant

3,050 : $0.0985
2,275 : $0.1099
1,760 : $0.1137
1,280 : $0.1175
825 : $0.1213
340 : $0.1478

277,800

C3216X5R1E476MTJ00E

TDK Corporation

1,230 : $0.2442
985 : $0.2541
760 : $0.264
530 : $0.2839
345 : $0.2938
160 : $0.3136

256,770

SDCW3216-2-222TF

Sunlord

CMC 200MA 2LN 2.2K OHM SMD
RoHS : Compliant

5,425 : $0.0619
4,055 : $0.0691
3,135 : $0.0715
2,280 : $0.0738
1,470 : $0.0763
605 : $0.0928

227,719

C3216X7S2A225KT000N

TDK Corporation

2,005 : $0.1497
1,500 : $0.167
1,160 : $0.1728
845 : $0.1785
545 : $0.1843
225 : $0.2246

120,000

C3216X7R1C106KT000N

TDK Corporation

RoHS : Compliant

3,220 : $0.0932
2,580 : $0.097
1,985 : $0.1008
1,385 : $0.1084
895 : $0.1122
420 : $0.1197

120,000

C3216X7R1H475KT000E

TDK Corporation

4.7UF/50VDC +/-10% CERAMIC-X7R 1206

2,605 : $0.1152
1,950 : $0.1285
1,505 : $0.1329
1,095 : $0.1373
710 : $0.1418
290 : $0.1728

100,000

PBY321611T-601Y-N

YAGEO Corporation

RoHS : Compliant

3,025 : $0.0993
2,260 : $0.1107
1,750 : $0.1146
1,270 : $0.1184
820 : $0.1222
340 : $0.1489

81,006

C3216X7R1E475KT000N

TDK Corporation

Cap SMT Cer 4.7UF 25V 10% 1206 T/r

3,810 : $0.0788
2,845 : $0.0879
2,200 : $0.091
1,600 : $0.094
1,035 : $0.097
425 : $0.1182

50,000

MP3216DJ-LF-Z

Monolithic Power Systems

IC REG BOOST ADJ 750MA TSOT23-6
RoHS : Compliant

280 : $1.0834
210 : $1.2084
160 : $1.25
120 : $1.2917
75 : $1.3334
35 : $1.625

10,515

ANT3216LL00R2400A

YAGEO Corporation

RF ANT 2.45GHZ CHIP SOLDER SMD / WIRELESS COMPONENTS
RoHS : Compliant

1,770 : $0.1698
1,320 : $0.1894
1,025 : $0.196
745 : $0.2025
480 : $0.209
200 : $0.2547

3,633

C3216X7R1H225K160AB

TDK Corporation

CAP CER 2.2UF 50V X7R 1206
RoHS : Compliant

680 : $0.4428
510 : $0.4939
395 : $0.511
285 : $0.528
185 : $0.545
80 : $0.6642

3,310

IS42S32160F-6BLI-TR

Integrated Silicon Solution Inc

IC DRAM 512MBIT PAR 90TFBGA / SDRAM Memory IC 512Mbit Parallel 167 MHz 5.4 ns 90-TFBGA (8x13)
RoHS : Compliant

10 : $31.5152
8 : $35.1516
6 : $36.3637
4 : $37.5758
3 : $38.7879
2 : $47.2728

2,390

IS42S32160F-7BLI-TR

Integrated Silicon Solution Inc

IC DRAM 512MBIT PAR 90TFBGA

8 : $39.394
6 : $43.9394
5 : $45.4546
4 : $46.9697
3 : $48.4849
1 : $59.091

340

Wuhan P&S

FAN3216TMX-F085

onsemi

Dual-channel 2 A high-speed low-end gate driver
RoHS : Compliant

1 : $1.78
100 : $1.14
500 : $0.94
1,000 : $0.87

67,500

321613-R22K Verteiler

Link URL