325D-C2-R0 Price, Verteiler, Stock

Key Specifications, Power Output: 20 dBm P1dB, Frequency, Min: 30 MHz, Frequency, Max: 20 GHz, Gain, Typical: 15 dB, Connector Series: SMA. 3 dB NF, 20 dBm P1dB, 30 MHz to 20 GHz, Low Noise Broadband Amplifier, 15 dB Gain, SMA. PE15A3254 low noise broadband amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This SMA broadband low noise amplifier has wide-band capability with a minimum frequency of 30 MHz and maximum frequency of 20 GHz. The typical gain of this broad-band low noise radio frequency amplifier is 15 dB. Pasternack broadband low noise amplifier PE15A3254 is rated at 20 dBm P1dB. Our broad band low noise radio frequency amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial broadband low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $5,980.0
5 : $5,740.8
10 : $5,501.6

PE3255LF-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Male Right Angle Cable 12 Inch Length Using RG393 Coax, RoHS., Radio frequency assembly N male to N male right angle cable 12 inch length using RG393 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable 12 inch length using RG393 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3255LF-12, can also be known as a type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3255LF-12 is built with RG393 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 10 GHz maximum frequency type N male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3255LF-12 can also be used in the other direction and will be right angle type N male to N type male cable assembly if the opposite connectivity is required. Type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 12 inch length using RG393 coax, RoHS.

1 : $135.99
25 : $129.19
50 : $122.39

PE3C3259

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50. SMA Male Right Angle to Water Blue FAKRA Jack Cable Using RG316-DS Coax. PE3C3259 is a SMA male right angle to FAKRA jack cable using RG316-DS coax. This Pasternack SMA male right angle to FAKRA jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm FAKRA for connector 2. SMA right angle to FAKRA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3259 SMA male right angle to FAKRA jack cable assembly is constructed with RG316-DS coax and the maximum VSWR is 1.4:1.

PE3C3325-72

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 60 inches. BNC Male to BNC Female Cable 60 Inch Length Using RG174 Coax., Radio frequency assembly BNC male to BNC female cable 60 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC female cable 60 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE3C3325-72, can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE3C3325-72 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3325-72 can also be used in the other direction and will be BNC female to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC female cable 60 inch length using RG174 coax.

1 : $75.99
25 : $72.19
50 : $68.39
100 : $65.35

PE3C3325/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male to BNC Female Cable 12 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly BNC male to BNC female cable 12 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC female cable 12 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assembly has male gender on end 1 and female on end 2. PE3C3325/HS-12 can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE (LD) dielectric type. BNC plug to BNC jack cable assembly PE3C3325/HS-12 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has crimp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C3325/HS-12 RF cable are available on our downloadable PDF datasheet.PE3C3325/HS-12 can also be used in the other direction and will be BNC female to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements.

1 : $94.99
25 : $90.24
50 : $85.49
100 : $81.69

PE3C3258

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50. N Female to Water Blue FAKRA Jack Cable Using RG174 Coax. PE3C3258 is a N type female to FAKRA jack cable using RG174 coax. This Pasternack type N female to FAKRA jack cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm FAKRA for connector 2. Our female type N to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3258 N type female to FAKRA jack cable assembly is constructed with RG174 coax.

PE3C3325/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to BNC Female Cable 48 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly BNC male to BNC female cable 48 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC female cable 48 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assembly has male gender on end 1 and female on end 2. PE3C3325/HS-48 can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE (LD) dielectric type. BNC plug to BNC jack cable assembly PE3C3325/HS-48 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has crimp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C3325/HS-48 RF cable are available on our downloadable PDF datasheet.PE3C3325/HS-48 can also be used in the other direction and will be BNC female to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements.

1 : $96.99
25 : $92.14
50 : $87.29
100 : $83.41

PE3W11325

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm.

PE3W20325/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. SMA Female to UHF Female Cable Using LMR-195-UF Coax with HeatShrink. PE3W20325/HS is a SMA female to UHF female cable using LMR-195-UF coax. This Pasternack SMA female to UHF female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm UHF for connector 2. Our female SMA to female UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20325/HS SMA female to UHF female cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3254LF-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to BNC Male Cable 12 Inch Length Using RG393 Coax, RoHS., Radio frequency assembly N male to BNC male cable 12 inch length using RG393 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to BNC male cable 12 inch length using RG393 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and BNC cable connection on the other. Our type N to BNC cable assemblies have a male gender on end 1 and male on end 2. This N type to BNC cable is a male to male coax assembly, PE3254LF-12, can also be known as a type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to BNC plug cable assembly PE3254LF-12 is built with RG393 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency type N male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3254LF-12 can also be used in the other direction and will be BNC male to type N male cable assembly if the opposite connectivity is required. N type plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to BNC male cable 12 inch length using RG393 coax, RoHS.

1 : $101.99
25 : $96.89
50 : $91.79
100 : $87.71

PE3255LF-48

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male to N Male Right Angle Cable 48 Inch Length Using RG393 Coax, RoHS., Radio frequency assembly N male to N male right angle cable 48 inch length using RG393 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable 48 inch length using RG393 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle N type cable connection on the other. Our type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE3255LF-48, can also be known as a type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3255LF-48 is built with RG393 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 10 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3255LF-48 can also be used in the other direction and will be right angle type N male to N type male cable assembly if the opposite connectivity is required. N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 48 inch length using RG393 coax, RoHS.

1 : $189.99
25 : $180.49
50 : $170.99

PE3258-36

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 36 inches. Mini UHF Male to Mini UHF Male Cable 36 Inch Length Using RG58 Coax., Radio frequency assembly mini UHF male to mini UHF male cable 36 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Mini UHF male to mini UHF male cable 36 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini UHF to mini UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with mini UHF cable connection on one end and mini UHF cable connection on the other. Our mini UHF to mini UHF cable assemblies have a male gender on end 1 and male on end 2. This mini UHF to mini UHF cable is a male to male coax assembly, PE3258-36, can also be known as a mini UHF plug to mini UHF plug cable assembly and will be shipped same-day as it is purchased. Mini UHF plug to mini UHF plug cable assembly PE3258-36 is built with RG58 which is a flexible coax type. The Pasternack flexible Mini UHF cable assembly is manufactured with mini UHF to mini UHF cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2.5 GHz maximum frequency mini UHF male to mini UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Mini UHF plug to mini UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini UHF to mini UHF cable assembly for quick shipment worldwide. Variations of mini UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini UHF male to mini UHF male cable 36 inch length using RG58 coax.

1 : $51.99
25 : $49.39
50 : $46.79
100 : $44.71

PE33251LF

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to TNC Male Right Angle Cable Using RG142 Coax, LF Solder. PE33251LF is a BNC male right angle to TNC male right angle cable using RG142 coax. This Pasternack BNC male right angle to TNC male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm TNC for connector 2. BNC right angle to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33251LF BNC male right angle to TNC male right angle cable assembly is constructed with RG142 coax.

PE3253-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Female Cable 12 Inch Length Using PE-SR047AL Coax., Radio frequency assembly SMA male to SMA female cable 12 inch length using PE-SR047AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 12 inch length using PE-SR047AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3253-12, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3253-12 is built with PE-SR047AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3253-12 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 12 inch length using PE-SR047AL coax.

1 : $91.99
25 : $87.39
50 : $82.79
100 : $79.11

PE3255/HS

Pasternack Enterprises

Teledyne HiRel

5962-9325301B2A

Teledyne HiRel

BUFFER, QUAD, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/32501BRA

Teledyne HiRel

8-BIT REGISTER WITH CLEAR

5962-9325001M2A

Teledyne HiRel

BUFFER/LINE DRIVER, OCTAL, W/3-STATE OUTPUTS AND
RoHS : Not Compliant

5962-9325001MRA

Teledyne HiRel

BUFFER/LINE DRIVER, OCTAL, W/3-STATE OUTPUTS AND
RoHS : Not Compliant

5962-9325001MSA

Teledyne HiRel

BUFFER/LINE DRIVER, OCTAL, W/3-STATE OUTPUTS AND
RoHS : Not Compliant

5962-9325301BCA

Teledyne HiRel

BUFFER, QUAD, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-9325301BDA

Teledyne HiRel

BUFFER, QUAD, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

Venkel Ltd.

HMCR0402-16W-2325FT

VENKEL LTD

High Value CR;0402;1/16W;23.2M;�1%
RoHS : Compliant

10,000

FBM0603-252P

VENKEL LTD

Multi-Layer Ferrite Bead;0603;2.5K
RoHS : Compliant

FBC0603-250P

VENKEL LTD

High Current Ferrite Bead;0603;25R
RoHS : Compliant

Waytek, Inc.

643251023

Molex

CMC Plug CP 1.5
RoHS : Compliant

100 : $0.0776
200 : $0.0776
500 : $0.0673
1,000 : $0.0673

19,524

S325DKG12

UMPCO Inc

3/4" Aluminum Cable Clamp 1/2 inch wide Partially cushioned

20 : $0.7309
50 : $0.6526
100 : $0.5917
200 : $0.5721
500 : $0.5526
1,000 : $0.5309

3,791

S325DKG14

UMPCO Inc

7/8" Aluminum Cable Clamp 1/2 inch wide Partially cushioned

10 : $1.4206
50 : $1.2684
100 : $1.15
200 : $1.1119
500 : $1.0738
1,000 : $1.0316

2,663

S732-5B8G8

UMPCO Inc

1/2" Fully Cushioned Clamp 1/2 inch wide, metal

20 : $1.2257
50 : $1.0944
100 : $0.9923
200 : $0.9595
500 : $0.9266
1,000 : $0.8901

1,888

S325SSG20

UMPCO Inc

1-1/4" Stainless Cable Clamp 1/2 inch wide Partially cushioned

10 : $0.9515
50 : $0.8496
100 : $0.7703
200 : $0.7449
500 : $0.7193
1,000 : $0.691

1,839

S325G18

UMPCO Inc

1-1/8" Plated Steel Clamp 1/2 inch wide Partially cushioned

20 : $0.6241
50 : $0.5572
100 : $0.5052
200 : $0.4885
500 : $0.4718
1,000 : $0.4532

1,683

S325DKG20

UMPCO Inc

1-1/4" Aluminum Cable Clamp 1/2 inch wide Partially cushioned

10 : $1.594
50 : $1.4232
100 : $1.2904
200 : $1.2476
500 : $1.2049
1,000 : $1.1575

1,248

S325SSG28

UMPCO Inc

1-3/4" Stainless Cable Clamp 1/2 inch wide Partially cushioned

10 : $1.7219
50 : $1.5374
100 : $1.3939
200 : $1.3478
500 : $1.3017
1,000 : $1.2504

1,088

19325-04P

Eaton Electronics

25 AMP Maxi Circuit Breaker ATC Blade Reset 19325-04P-02 BUSSMANN

1 : $6.36
10 : $6.15
50 : $5.91
100 : $5.49
200 : $5.37
500 : $5.16

339

901-325

Littelfuse Inc

ZCase Battery Term Red Cover See Product Chg Notif on Web New Version 3/20/21

1 : $10.61
10 : $10.22
50 : $9.87
100 : $8.69
200 : $8.38
500 : $8.09

283

S732-5B8G4

UMPCO Inc

1/4" Fully Cushioned Clamp 1/2 inch wide, metal

20 : $1.7646
50 : $1.5756
100 : $1.4285
200 : $1.3813
500 : $1.334
1,000 : $1.2815

196

3254

Heyco

Black 3/8 Pigtail Cordgrip .181" to .312" Cable IP68 UL LIKE PN 24615
RoHS : Compliant

5 : $1.7606
10 : $1.6474
50 : $1.5708
100 : $1.4268
200 : $1.381
500 : $1.3286

126

ANN-325

Eaton Electronics

325A Limiter ANN Fast Acting Fuse

1 : $46.29
10 : $43.01
50 : $40.5
100 : $38.01
200 : $36.17
500 : $34.58

4300-3258

Pressmaster AB

DIE SET FOR 22-14GA HEAT SHRINK FOR 560 CRIMPER

1 : $52.12
10 : $48.94

53252-3

Grote Industries Inc

Red Stop-Tail-Turn LED Light 4" Round 10 LED 12V .24V US 40 GROTE 53252-3

1 : $30.73
5 : $28.79
10 : $27.0
50 : $24.88
100 : $23.74
200 : $22.93

Win Source Electronics

LMK325B7476KM-PR

TAIYO YUDEN

CAP CER 47UF 10V X7R 1210 / 47 µF ±10% 10V Ceramic Capacitor X7R 1210 (3225 Metric)
RoHS : Compliant

2,540 : $0.1182
1,900 : $0.1319
1,470 : $0.1364
1,065 : $0.141
690 : $0.1455
285 : $0.1773

240,000

TLV73325PDBVT

Texas Instruments

IC REG LDO 2.5V 0.3A 5SOT23
RoHS : Compliant

3,225 : $0.0931
2,410 : $0.1038
1,865 : $0.1074
1,355 : $0.1109
875 : $0.1145
360 : $0.1396

128,530

LM4040CIM3-2.5/NOP

Texas Instruments

IC VREF SHUNT 2.5V SOT23-3

820 : $0.4113
655 : $0.428
505 : $0.4448
355 : $0.4781
230 : $0.4948
110 : $0.5283

28,630

SN74CBT3257CPWR

Texas Instruments

IC QUAD1:2 FET MUX/DEMUX 16TSSOP
RoHS : Compliant

945 : $0.3184
705 : $0.3551
545 : $0.3673
400 : $0.3796
260 : $0.3918
105 : $0.4775

27,800

B32520C6103K

TDK Electronics

CAP FILM 10000PF 10% 400VDC RAD

525 : $0.6423
395 : $0.7165
305 : $0.7411
220 : $0.7659
145 : $0.7906
60 : $0.9634

21,800

SN74CB3Q3253PWRE4

Texas Instruments

IC MUX/DEMUX 2 X 4:1 16TSSOP / Multiplexer/Demultiplexer 2 x 4:1 16-TSSOP
RoHS : Compliant

325 : $0.9319
260 : $0.9697
200 : $1.0076
140 : $1.0834
90 : $1.1213
45 : $1.197

18,370

BUK9832-55A/CUX

Nexperia

MOSFET N-CH 55V 12A SOT223
RoHS : Compliant

31 : $9.7745
23 : $10.9023
18 : $11.2782
13 : $11.6542
9 : $12.0301
4 : $14.6617

9,969

0532530870

Molex

CONN HEADER VERT 8POS 2MM
RoHS : Compliant

3,840 : $0.0876
2,865 : $0.0978
2,215 : $0.1011
1,610 : $0.1045
1,040 : $0.1079
430 : $0.1314

9,650

ADS8325IBDGKT

Texas Instruments

IC ADC MICRPWR SMPL 16BIT 8VSSOP
RoHS : Compliant

32 : $9.486
26 : $9.8716
20 : $10.2572
14 : $11.0284
9 : $11.414
5 : $12.1852

6,060

MAX3250EAI

Maxim Integrated Products

RS-232 TRANSCEIVERS
RoHS : Not Compliant

28 : $12.2753
21 : $13.6917
16 : $14.1639
12 : $14.6359
8 : $15.1081
4 : $18.4129

6,000

LM4040CEM3-2.5/NOPB

Texas Instruments

LM4040-N/LM4040Q-N Precision Micropower Shunt Voltage Reference
RoHS : Compliant

400 : $0.7584
300 : $0.8459
230 : $0.875
170 : $0.9042
110 : $0.9334
45 : $1.1375

5,720

EMK325F226ZN-T

TAIYO YUDEN

CAP CER 22UF 16V Y5V 1210
RoHS : Compliant

1,535 : $0.219
1,150 : $0.2443
890 : $0.2527
645 : $0.2611
420 : $0.2696
175 : $0.3285

4,180

EPM3256ATI144-10N

Altera Corporation

IC CPLD 256MC 10NS 144TQFP
RoHS : Compliant

36 : $8.5083
29 : $8.8542
22 : $9.2
16 : $9.8918
10 : $10.2376
5 : $10.9294

3,800

XC7K325T-1FFG676C

AMD Xilinx

IC FPGA 400 I/O 676FCBGA / FPGA Kintex-7 Family 326080 Cells 28nm Technology 1V 676-Pin FCBGA Tray
RoHS : Compliant

4 : $80.2949
3 : $89.5597
2 : $92.6479
1 : $95.7362

1,700

BCM5325MA2KQMG

Broadcom Limited

FIVE PORT 10/100 SWITCH / Interface
RoHS : Compliant

9 : $40.4444
7 : $45.1111
5 : $46.6667
4 : $48.2223
3 : $49.7778
1 : $60.6667

Wuhan P&S

74FST3257MNTWG

onsemi

Quad 2:1 Multiplexer/Demultiplexer (Mux/Demux) Bus Switch
RoHS : Compliant

1 : $0.57
100 : $0.37
500 : $0.3
1,000 : $0.28

234,000

325D-C2-R0 Verteiler

Link URL