34L-S08-R Price, Verteiler, Stock

1 : $805.733
5 : $805.733
10 : $697.269
25 : $594.393
50 : $594.393
100 : $575.524
250 : $557.815
500 : $541.164
1,000 : $525.478
2,500 : $517.971
10,000 : $517.971

B0803008A74-34L

Amphenol PCD

Connector Acc

M39016/19-034L

TE Connectivity

Relays
RoHS : Not Compliant

MS27754-34L

Honeywell Sensing and Control

Switches

1 : $314.644
5 : $314.644
10 : $272.288
25 : $232.115
50 : $232.115
100 : $224.746
250 : $217.831
500 : $211.328
1,000 : $205.203
2,500 : $202.271
10,000 : $202.271

M39016/7-034L

TE Connectivity

Relays
RoHS : Not Compliant

Flip Electronics

NC7SP34L6X

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.06

210,000

NC7SV34L6X

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.04

132,410

MMUN2134LT1G

onsemi

Stock
RoHS : Compliant

33,000

NC7NP34L8X

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.18

19,743

SMMUN2134LT1G

onsemi

Stock, Ship Today
RoHS : Compliant

4,550

IDT840001AKI-34LF

Integrated Device Technology Inc

Stock

377

ICS840001AKI-34LF

Integrated Device Technology Inc

Stock
RoHS : Compliant

377

840001AK-34LFT

Renesas Electronics Corporation

Stock
RoHS : Compliant

377

840001AKI-34LF

Integrated Device Technology Inc

Stock, Ship Today
RoHS : Compliant

1 : $12.97

377

Maritex

L-934LGD

Kingbright

LED; THT; 3mm; green; 0.7-2 mcd/2mA; typ. 568 nm; 60 degrees; green diffused /1000pcs
RoHS : Compliant

5,000 : $0.065
2,000 : $0.068
1,000 : $0.07
500 : $0.073
100 : $0.081
50 : $0.086
1 : $0.096

10,000

SS34L

Guangdong Hottech Industrrial Co

Schottky Diode; 40V; 3A; -55+175 deg.C; SMD; SOD123FL

3,000 : $0.049
1,000 : $0.055
100 : $0.059
25 : $0.062
1 : $0.065

7,656

RC0805FR-076K34L

YAGEO Corporation

Resistor; Thick Film; 0805; 6.34K; 1%; 1/8W
RoHS : Compliant

50,000 : $0.003
15,000 : $0.003
5,000 : $0.004
1,000 : $0.011
100 : $0.025
1 : $0.135

5,000

HFS-034L01000FT 250FT/RL

WENCHANG

Ribbon Cable; 1.00 pitch; 34-core; AWG#28 [7x0.127]

8 : $67.297
5 : $73.581
2 : $82.553
1 : $89.729

AXIOM-M3-4L-SCREW

Axiomtek Co Ltd

Screws for GOT5103W-845

1 : $0.156

HF-034L0100 250FT/RL

HUNG-FU

Ribbon Cable; 1.27 pitch; 34-core; AWG#28 [7x0.127]

8 : $78.525
5 : $92.382
2 : $103.93
1 : $115.478

Neutron USA

3PLBR34L-024

Altech Corporation

Industrial Panel Mount Indicators / Switch Indicators

1 : $64.99

ULV4F2BSLL34L20

E-Switch Inc

Pushbutton Switches ANTI-VANDAL, 3A 250VAC, SPDT On-(On), Panel Mount, Front Solder
RoHS : Compliant

1 : $44.99

ULV8F2BSLL34L20

E-Switch Inc

Pushbutton Switches ANTI-VANDAL, 3A 250VAC, SPDT On-On, Panel Mount, Front Solder
RoHS : Compliant

1 : $44.99

110227-HMC734LP5

Analog Devices Inc

Clock & Timer Development Tools HMC734LP5 Evaluation PCB
RoHS : Compliant

1 : $1,434.99

GP134LG

Hammond Manufacturing

Electrical Enclosure Accessories Gland plate Gray for 11.75 x 2.31 opening - Steel/Lt Gray
RoHS : Compliant

1 : $139.99

Pasternack Enterprises US

PE34734LF-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMC Plug Right Angle to BNC Male Cable 24 Inch Length Using RG58 Coax, LF Solder., Radio frequency assembly SMC plug right angle to BNC male cable 24 inch length using RG58 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMC plug right angle to BNC male cable 24 inch length using RG58 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMC cable connection on one end and BNC cable connection on the other. Our right angle SMC to BNC cable assembly has plug gender on end 1 and male on end 2. PE34734LF-24 can also be known as a right angle SMC male to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.960 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMC male to BNC plug cable assembly PE34734LF-24 is built with RG58 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with right angle SMC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE34734LF-24 RF cable are available on our downloadable PDF datasheet.PE34734LF-24 can also be used in the other direction and will be BNC male to right angle SMC plug cable assembly if the opposite connectivity is required. SMC right angle male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to BNC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMC RF cable assembly as per your requirements.

1 : $89.99
25 : $85.49
50 : $80.99
100 : $77.39

3,334

PEWAN034-LMT

Pasternack Enterprises

Key Specifications. Product Type Mount Waveguide Size WR-34 Body Material Aluminum Body Finish Chromate conversion. Standard Gain Horn L-style Antenna Mount, Waveguide Size WR34, IEC R260., Pasternack’s PEWAN034-LMT is an L-style antenna mount specifically designed for gain horn antennas. This L-style antenna mount is built with a waveguide size of WR34 and is compatible with the IEC R260 standard which ensures seamless integration with various equipment. Our high-quality WR34 gain horn L-style antenna mount is suitable for test and measurement applications. This antenna holder from Pasternack is highly portable and easy to handle. Our IEC R260 gain horn antenna holder has an aluminum body with chromate conversion inside finish, providing protection against environmental factors. This WR34 mount is coated with an anticorrosion gray paint, safeguarding it from moisture and UV radiation. Additional dimensions and specifications for this WR34 gain horn L-style antenna mount are on our downloadable PDF datasheet above. This gain horn L-style antenna mount is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality IEC R260 standard L-style antenna mount and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect WR34 gain horn L-style antenna mount for your requirement. Features Supports WR34 waveguide size Supports flange type: UBR 260, PBR 260, CBR 260 All Aluminum material Chromate conversion - inside finish Anti corrosion grey paint - outside finish Easy mount option and Seamless fit L-style mount for tripodsApplications Gain Horn or Waveguide Mounting Antenna Measurements Laboratory use Microwave Testing Radome Testing EMC measurement Satellite Antenna Testing.

1 : $393.99
10 : $386.11
25 : $378.23
100 : $370.35

PE33234LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. N Male to SMA Female Cable Using PE-P195 Coax, LF Solder. PE33234LF is a N male to SMA female cable using PE-P195 coax. This Pasternack N male to SMA female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33234LF N male to SMA female cable assembly is constructed with PE-P195 coax.

PE3534LF-18

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FL, RF Cable Type: PE-SR401FL, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Female to SMA Female Cable 18 Inch Length Using PE-SR401FL Coax, RoHS., Radio frequency assembly SMA female to SMA female cable 18 inch length using PE-SR401FL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to SMA female cable 18 inch length using PE-SR401FL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3534LF-18, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3534LF-18 is built with PE-SR401FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA female cable 18 inch length using PE-SR401FL coax, RoHS.

1 : $173.99
25 : $165.29
50 : $156.59

PE3C1934LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Male to BNC Male Cable Using LMR-195 Coax with HeatShrink, LF Solder. PE3C1934LF/HS is a N male to BNC male cable using LMR-195 coax. This Pasternack N male to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our male N to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1934LF/HS N male to BNC male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W11434LF/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Water Blue FAKRA Jack to TNC Female Bulkhead Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly water blue FAKRA jack to TNC female bulkhead low loss cable 48 inch length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Water blue FAKRA jack to TNC female bulkhead low loss cable 48 inch length using LMR-100 coax with heatshrink, LF solder, FAKRA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and TNC bulkhead cable connection on the other. Our low loss FAKRA to TNC cable assemblies have a jack gender on end 1 and female on end 2. PE3W11434LF/HS-48 can also be known as a low loss FAKRA female to TNC jack cable assembly and will be shipped same-day as it is purchased. FAKRA female to TNC jack cable assembly PE3W11434LF/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency FAKRA jack to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11434LF/HS-48 can also be used in the other direction and will be TNC female bulkhead to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to TNC cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack to TNC female bulkhead low loss cable 48 inch length using LMR-100 coax with heatshrink, LF solder.

1 : $93.99
25 : $89.29
50 : $84.59
100 : $80.83

PE3034LF

Pasternack Enterprises

PE33734LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. N Male to TNC Male Cable Using RG225 Coax with HeatShrink, LF Solder. PE33734LF/HS is a N male to TNC male cable using RG225 coax. This Pasternack N male to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33734LF/HS N male to TNC male cable assembly is constructed with RG225 coax.

PE35934LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female Bulkhead to MMCX Plug Cable Using RG174 Coax, LF Solder. PE35934LF is a reverse polarity SMA female bulkhead to MMCX plug cable using RG174 coax. This Pasternack reverse polarity SMA female bulkhead to MMCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MMCX for connector 2. Our reverse polarity female SMA bulkhead to plug MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE35934LF SMA reverse polarity female bulkhead to MMCX plug cable assembly is constructed with RG174 coax.

PE3C11034LF/HS

Pasternack Enterprises

PE3W10634LF-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. SMC Plug Right Angle to SMA Male Right Angle Low Loss Cable 200 CM Length Using LMR-100 Coax, LF Solder., Radio frequency assembly SMC plug right angle to SMA male right angle low loss cable 200 cm length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMC plug right angle to SMA male right angle low loss cable 200 cm length using LMR-100 coax, LF solder, SMC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle SMC to right angle SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3W10634LF-200CM can also be known as a low loss right angle SMC male to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMC male to SMA plug cable assembly PE3W10634LF-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with right angle SMC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMC right angle plug to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10634LF-200CM can also be used in the other direction and will be right angle SMA male to right angle SMC plug cable assembly if the opposite connectivity is required. Low loss SMC right angle male to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMA cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug right angle to SMA male right angle low loss cable 200 cm length using LMR-100 coax, LF solder.

1 : $92.99
25 : $88.34
50 : $83.69
100 : $79.97

PE3W15434LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SHV Jack to SHV Jack Cable Using RG58 Coax, LF Solder. PE3W15434LF is a SHV jack to SHV jack cable using RG58 coax. This Pasternack SHV jack to SHV jack cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SHV for connector 2. Our jack SHV to jack SHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15434LF SHV jack to SHV jack cable assembly is constructed with RG58 coax.

PE3W16134LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm. UHF Male to UHF Male Cable Using LMR-400-LLPX Coax with HeatShrink, LF Solder. PE3W16134LF/HS is a UHF male to UHF male cable using LMR-400-LLPX coax. This Pasternack UHF male to UHF male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm UHF for connector 2. Our male UHF to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16134LF/HS UHF male to UHF male cable assembly is constructed with LMR-400-LLPX coax, * LMR™ is a trademark of Times Microwave Systems.

PE3534LF-6

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FL, RF Cable Type: PE-SR401FL, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Female to SMA Female Cable 6 Inch Length Using PE-SR401FL Coax, RoHS., Radio frequency assembly SMA female to SMA female cable 6 inch length using PE-SR401FL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to SMA female cable 6 inch length using PE-SR401FL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3534LF-6, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3534LF-6 is built with PE-SR401FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA female cable 6 inch length using PE-SR401FL coax, RoHS.

1 : $157.99
25 : $150.09
50 : $142.19
100 : $135.87

PE3W01634LF

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm.