 |
Datenblatt-Suchmaschine für elektronische Bauteile |
|
|
Datenblatt-Suchmaschine für elektronische Bauteile |
|
4616R-R2R-503 Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
 Ameya Holding Limited | 232270461603L | NXP Semiconductors | 4,014 | |||
 ComSIT USA | 527461633 | AVAILABLE EU | 836 | |||
ComSIT USA | BSX4616 | Philips E C G Inc | Small Signal Bipolar Transistor, 1A I(C), 60V V(BR)CEO, 1-Element, NPN, Silicon, TO-39 RoHS : Not Compliant | 7,798 | ||
| AO4616 | Alpha & Omega Semiconductor | Transistor RoHS : Compliant | 2,990 | |||
| 50846162 | TE Connectivity | 0.8 MM FREE HEIGHT (FH) CONNECTOR Board Stacking Connector, 60 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Natural Insulator, Receptacle RoHS : Not Compliant | 1,000 | |||
MSP430F46161IPZ | Texas Instruments | MIXED SIGNAL MICROCONTROLLER RISC Microcontroller, 16-Bit, FLASH, MSP430 CPU, 8MHz, CMOS, PQFP100 RoHS : Compliant | 181 | |||
| TPS54616PW | Texas Instruments | 3-V TO 6-V INPUT, 6-AMP OUTPUT SYNCHRONOUS BUCK PWM SWITCHER Switching Regulator, Voltage-mode, 6A, 700kHz Switching Freq-Max, PDSO28 RoHS : Not Compliant | 99 | |||
| BCM54616SC0KFBG | Broadcom Limited | 10/100/1000BASE-T GIGABIT COPPER TRANSCEIVER Ethernet Transceiver, CMOS, PBGA100 RoHS : Compliant | 50 | |||
 NexGen Digital | 1N4616 | Microsemi FPGA & SoC (now Microchip) | 1,190 | |||
| JANTX1N4616-1 | Microsemi FPGA & SoC (now Microchip) | 859 | ||||
| JANTX1N4616 | Microsemi FPGA & SoC (now Microchip) | 503 | ||||
 PUI | 12.94616 | 7,183 | ||||
 Avnet Silica | SLG46169V | Renesas Electronics Corporation | Programmable Mixed Signal Matrix 18V to 5V 14Pin STQFN (Alt: SLG46169V) RoHS : Compliant | 0 | ||
| SLG46169VTR | Renesas Electronics Corporation | Programmable Mixed Signal Matrix 18V to 5V 14Pin STQFN TR (Alt: SLG46169VTR) RoHS : Compliant | 0 | |||
| SLG4AD46169V | Renesas Electronics Corporation | STQFN 20GreenPAK cVendplug (Alt: SLG4AD46169V) RoHS : Compliant | 0 | |||
| JAN1N4616UR-1 | Microchip Technology Inc | (Alt: JAN1N4616UR-1) RoHS : Not Compliant | 0 | |||
| JANTX1N4616-1 | Microchip Technology Inc | (Alt: JANTX1N4616-1) RoHS : Not Compliant | 0 | |||
| JANS1N4616UR-1 | Microchip Technology Inc | (Alt: JANS1N4616UR-1) RoHS : Not Compliant | 0 | |||
| SLG4AX46160-AP | Renesas Electronics Corporation | FCQFN14BUERKERT WERKE SLG47115V Ausgangstreiber 33V (Alt: SLG4AX46160-AP) RoHS : Compliant | 0 | |||
| JANTX1N4616UR-1 | Microchip Technology Inc | (Alt: JANTX1N4616UR-1) RoHS : Not Compliant | 0 | |||
| JANTXV1N4616UR-1 | Microchip Technology Inc | (Alt: JANTXV1N4616UR-1) RoHS : Compliant | 0 | |||
| JANTX1N4616UR-1/TR | Microchip Technology Inc | (Alt: JANTX1N4616UR-1/TR) RoHS : Not Compliant | 0 | |||
| DTR0009904616 (ALS) | Sanmina Corporation | (Alt: DTR0009904616) RoHS : Not Compliant | 0 | |||
| LPC54616J512BD208E,551 | NXP Semiconductors | ARM MCU LPC Family LPC54000 Series Microcontrollers ARM CortexM4 32 bit 180 MHz 512 KB (Alt: LPC54616J512BD208E) RoHS : Compliant | 0 | |||
| LPC54616J512BD100E,551 | NXP Semiconductors | MCU 32Bit LPC54616 ARM Cortex M4 RISC 512KB Flash 17V to 36V 100Pin LQFP Tray (Alt: LPC54616J512BD100E) RoHS : Compliant | 0 | |||
| LPC54616J256ET180E,551 | NXP Semiconductors | ARM MCU 32bit ARM CortexM4F 180 MHz 256 KB 136 KB 180 Pins TFBGA (Alt: LPC54616J256ET180E) RoHS : Compliant | 0 | |||
| LPC54616J512ET100E,551 | NXP Semiconductors | ARM MCU LPC Family LPC54000 Series Microcontrollers ARM CortexM4 32 bit 180 MHz 512 KB (Alt: LPC54616J512ET100E) RoHS : Compliant | 0 | |||
 Flip Electronics | LPC54616J256ET180E | NXP Semiconductors | Stock RoHS : Compliant | 13,608 | ||
LPC54616J512BD208E | NXP Semiconductors | Stock RoHS : Compliant | 1,029 | |||
LPC54616J512ET100E | NXP Semiconductors | Stock RoHS : Compliant | 1,024 | |||
 Maritex | 794616-2 | TE Connectivity | Rectangular Connector Housings; 794616-2; TE CONNECTIVITY; 2; 2; 2; Yes RoHS : Compliant |
| 13,945 | |
| 5016461600 | Molex | Rectangular Connector Housings; 5016461600; MOLEX; 2; 16; 16; Yes RoHS : Compliant |
| 1,841 | ||
LPC54616J512BD100E | NXP Semiconductors | Microcontrollers (MCU); LPC54616J512BD100E; NXP SEMICONDUCTORS; 200 kB RoHS : Compliant |
| 1,165 | ||
 Pasternack Enterprises US | PE3W14616 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. Fire Rated BNC Male to SMA Male Low Loss Cable Using LMR-100-FR Coax., Radio frequency assembly fire rated BNC male to SMA male low loss cable using LMR-100-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated BNC male to SMA male low loss cable using LMR-100-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss BNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W14616 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14616 RF cable has a FRPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BNC male to SMA male cable has a maximum VSWR of 1.4:1. BNC plug to SMA plug cable assembly PE3W14616 is built with LMR-100A-FR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder (captive contact) attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14616 can also be used in the other direction and will be a SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 2,935 | ||
| PE34461-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMB Plug Right Angle to SMB Plug Right Angle Cable 60 Inch Length Using RG400 Coax., Radio frequency assembly SMB plug right angle to SMB plug right angle cable 60 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug right angle to SMB plug right angle cable 60 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and right angle SMB cable connection on the other. Our right angle SMB to right angle SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE34461-60, can also be known as a right angle SMB male to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE34461-60 is built with RG400 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to right angle SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMB right angle plug to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMB right angle male to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug right angle to SMB plug right angle cable 60 inch length using RG400 coax. |
| 1,423 | ||
| PE3W14616-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Fire Rated BNC Male to SMA Male Low Loss Cable 36 Inch Length Using LMR-100-FR Coax., Radio frequency assembly fire rated BNC male to SMA male low loss cable 36 inch length using LMR-100-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated BNC male to SMA male low loss cable 36 inch length using LMR-100-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss BNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W14616-36 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14616-36 RF cable has a FRPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BNC male to SMA male cable has a maximum VSWR of 1.4:1. BNC plug to SMA plug cable assembly PE3W14616-36 is built with LMR-100A-FR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder (captive contact) attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14616-36 can also be used in the other direction and will be a SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 587 | ||
| PE3W14616-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated BNC Male to SMA Male Low Loss Cable 48 Inch Length Using LMR-100-FR Coax., Radio frequency assembly fire rated BNC male to SMA male low loss cable 48 inch length using LMR-100-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated BNC male to SMA male low loss cable 48 inch length using LMR-100-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss BNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W14616-48 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14616-48 RF cable has a FRPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BNC male to SMA male cable has a maximum VSWR of 1.4:1. BNC plug to SMA plug cable assembly PE3W14616-48 is built with LMR-100A-FR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder (captive contact) attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14616-48 can also be used in the other direction and will be a SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 587 | ||
| PE3W14616-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated BNC Male to SMA Male Low Loss Cable 24 Inch Length Using LMR-100-FR Coax., Radio frequency assembly fire rated BNC male to SMA male low loss cable 24 inch length using LMR-100-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated BNC male to SMA male low loss cable 24 inch length using LMR-100-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss BNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W14616-24 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14616-24 RF cable has a FRPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BNC male to SMA male cable has a maximum VSWR of 1.4:1. BNC plug to SMA plug cable assembly PE3W14616-24 is built with LMR-100A-FR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder (captive contact) attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14616-24 can also be used in the other direction and will be a SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 587 | ||
| PE3W14616-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Fire Rated BNC Male to SMA Male Low Loss Cable 200 CM Length Using LMR-100-FR Coax., Radio frequency assembly fire rated BNC male to SMA male low loss cable 200 cm length using LMR-100-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated BNC male to SMA male low loss cable 200 cm length using LMR-100-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss BNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W14616-200CM can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14616-200CM RF cable has a FRPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BNC male to SMA male cable has a maximum VSWR of 1.4:1. BNC plug to SMA plug cable assembly PE3W14616-200CM is built with LMR-100A-FR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder (captive contact) attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14616-200CM can also be used in the other direction and will be a SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 587 | ||
| PE3W14616-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Fire Rated BNC Male to SMA Male Low Loss Cable 100 CM Length Using LMR-100-FR Coax., Radio frequency assembly fire rated BNC male to SMA male low loss cable 100 cm length using LMR-100-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated BNC male to SMA male low loss cable 100 cm length using LMR-100-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss BNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W14616-100CM can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14616-100CM RF cable has a FRPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BNC male to SMA male cable has a maximum VSWR of 1.4:1. BNC plug to SMA plug cable assembly PE3W14616-100CM is built with LMR-100A-FR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder (captive contact) attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14616-100CM can also be used in the other direction and will be a SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 587 | ||
| PE39461-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to N Female Bulkhead Semi-Flexible Precision Cable 6 Inch Length Using PE-SR405FLJ Coax, RoHS., Radio frequency assembly SMA male to N female bulkhead semi-flexible precision cable 6 inch length using PE-SR405FLJ coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N female bulkhead semi-flexible precision cable 6 inch length using PE-SR405FLJ coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our precision SMA to N type cable assemblies have a male gender on end 1 and female on end 2. This SMA to N type cable is a male to female coax assembly, PE39461-6, can also be known as a precision SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE39461-6 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39461-6 can also be used in the other direction and will be type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. Precision SMA plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead semi-flexible precision cable 6 inch length using PE-SR405FLJ coax, RoHS. |
| 14 | ||
| PE7461-6 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Connector-Out Impedance: 50 Ohms, Max Freq: 12.4 GHz, Nominal Attenuation: 6 dB, Attenuation Accuracy, Typ: 0.7 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 5 Watts, Body Material: Brass, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator, N Male to N Female Brass Nickel Body Rated to 5 Watts Up to 12.4 GHz. PE7461-6 is a fixed 6 dB attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers, and detectors. Pasternack's PE7461-6 in-series fixed attenuator is available with a typical attenuation accuracy of 0.7 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and +125 deg C. Our fixed radio frequency attenuator with N connectors is constructed with brass body material and nickel plating. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7461-6 6 dB attenuator is rated for up to 12.4 GHz. Our microwave attenuator is rated to 5 Watts at the stated attenuation value. This coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization, production systems, wifi 6E, 5G cellular bands applications. Our fixed RF attenuator PE7461-6 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you to the ideal RF coaxial fixed attenuator as per your requirement. |
| 0 | ||
| PE3C4616LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. BNC Male to Reverse Polarity SMA Female Cable Using LMR-240 Coax with HeatShrink, LF Solder, RoHS. PE3C4616LF/HS is a BNC male to reverse polarity SMA female cable using LMR-240 coax. This Pasternack BNC male to reverse polarity SMA female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C4616LF/HS BNC male to SMA reverse polarity female cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W04616 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SMA Female to SMA Male Right Angle Cable Using RG188 Coax. PE3W04616 is a SMA female to SMA male right angle cable using RG188 coax. This Pasternack SMA female to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04616 SMA female to SMA male right angle cable assembly is constructed with RG188 coax. | 0 | |||
| PE34616/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Male Cable Using RG174 Coax with HeatShrink. PE34616/HS is a TNC male right angle to TNC male cable using RG174 coax. This Pasternack TNC male right angle to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34616/HS TNC male right angle to TNC male cable assembly is constructed with RG174 coax. | 0 | |||
| PE3C4616 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. BNC Male to Reverse Polarity SMA Female Cable Using LMR-240 Coax. PE3C4616 is a BNC male to reverse polarity SMA female cable using LMR-240 coax. This Pasternack BNC male to reverse polarity SMA female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C4616 BNC male to SMA reverse polarity female cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W24616 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. N Female Bulkhead to TNC Male Right Angle Cable Using RG393 Coax. PE3W24616 is a N female bulkhead to TNC male right angle cable using RG393 coax. This Pasternack N female bulkhead to TNC male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. N to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N bulkhead to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24616 N female bulkhead to TNC male right angle cable assembly is constructed with RG393 coax. | 0 | |||
| PE34616LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Male Cable Using RG174 Coax, LF Solder. PE34616LF is a TNC male right angle to TNC male cable using RG174 coax. This Pasternack TNC male right angle to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34616LF TNC male right angle to TNC male cable assembly is constructed with RG174 coax. | 0 | |||
 Vyrian | PCG-BA-24-616-1DA-E12 | Carling Technologies | Equipment Leakage Circuit Breaker, 2 Pole(s), 16A, 240VAC, Panel Mount | 17,743 | ||
MAX4616CSD | Maxim Integrated Products | SPST, 4 Func, 1 Channel, CMOS, PDSO14 RoHS : Not Compliant | 11,772 | |||
| 4616-7200 | 3m Electronic Products Division | Board Connector, 16 Contact(s), 2 Row(s), Male, 0.1 inch Pitch, IDC Terminal, Latch & Eject, Gray Insulator, Plug | 10,416 | |||
| MAX4616ESD | Maxim Integrated Products | SPST, 4 Func, 1 Channel, CMOS, PDSO14 RoHS : Not Compliant | 10,329 | |||
| 4616 | Keystone Electronics Corp | Mounting Bases/Accessories | 9,200 | |||
MSP430CG4616IPZ | Texas Instruments | RISC Microcontroller, 16-Bit, FLASH, MSP430 CPU, 8MHz, CMOS, PQFP100 | 8,674 | |||
| LTM4616MPV#PBF | Analog Devices Inc | Dual Switching Controller, Current-mode, 1750kHz Switching Freq-Max, PBGA144 RoHS : Compliant | 8,239 | |||
| LTM4616IY-PBF | Analog Devices Inc | 7,421 | ||||
| MAX14616AEWA-T | Analog Devices (Maxim Integrated) | 7,003 | ||||
| MAX4616ESD+T | Analog Devices Inc | SPST, 4 Func, 1 Channel, CMOS, PDSO14 RoHS : Compliant | 5,330 | |||
| JANTX1N4616UR-1 | Microchip Technology Inc | Zener Diode, 2.2V V(Z), 5%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Not Compliant | 4,304 | |||
| LMK04616EVM | Texas Instruments | 3,486 | ||||
5962-9461601QXX | Texas Instruments | Boundary Scan Reg Bus Transceiver, ABT Series, 1-Func, 8-Bit, True Output, BICMOS, CDIP28 RoHS : Unknown | 3,344 | |||
MAX4616EUD-T | Maxim Integrated Products | SPST, 4 Func, 1 Channel, CMOS, PDSO14 RoHS : Not Compliant | 883 | |||
| 2322-595-54616 | North American Philips Discrete Products Div | Varistor, 615V, 135J, Through Hole Mount RoHS : Not Compliant | 467 | |||
 Waytek, Inc. | 146161-91W | General Cable Technologies Corporation | 10GA GXL Green Cross-Link Automotive Wire XLPE -51C to 125C |
| 6,000 | |
 Win Source Electronics | AO4616 | Alpha & Omega Semiconductor | MOSFET N/P-CH 30V 8A/7A 8-SOIC RoHS : Compliant |
| 107,900 | |
| AO4616L | Alpha & Omega Semiconductor | Complementary Enhancement Mode Field Effect Transistor | MOSFET N/P-CH 30V 8SOIC RoHS : Compliant |
| 102,750 | ||
BQ24616RGER | Texas Instruments | IC SYNC SW-MODE BAT CHRGR 24VQFN RoHS : Compliant |
| 14,100 | ||
| BQ24616RGET | Texas Instruments | IC SYNC SW-MODE BAT CHRGR 24VQFN RoHS : Compliant |
| 14,020 | ||
MSP430FG4616IPZ | Texas Instruments | IC MCU 16BIT 92KB FLASH 100LQFP / MSP430 CPUX series Microcontroller IC 16-Bit 8MHz 92KB (92K x 8 + 256B) FLASH 100-LQFP (14x14) RoHS : Compliant |
| 8,738 | ||
| MSP430FG4616IPZR | Texas Instruments | MCU 16-bit MSP430 RISC 92KB Flash 2.5V/3.3V 100-Pin LQFP T/R / IC MCU 16BIT 92KB FLASH 100LQFP RoHS : Compliant |
| 7,890 | ||
| BCM54616SC0IFBG | Broadcom Limited | SINGLE GBE SERDES PHY RoHS : Compliant |
| 2,126 | ||
LTM4616IV#PBF | Linear Technology | Module DC-DC 2-OUT 0.6V to 5V 8A/8A 144-Pin LGA Tray / DC/DC CNVRTR 2X0.6-5V 144LGA RoHS : Compliant |
| 1,100 | ||
| BCM54616SC0KFBG | Broadcom Limited | IC SINGLE GBE SERDES PHY 100BGA RoHS : Compliant |
| 900 | ||
| LTM4616EV#PBF | Linear Technology | IC DC/DC UMODULE DUAL 8A 144-LGA RoHS : Compliant |
| 238 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
German ▼ 
English
Chinese
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand