| Datenblatt-Suchmaschine für elektronische Bauteile |
|
486AARMZ-R7 Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
![]() NXP Semiconductors | B4860NXE7QUMD | NXP Semiconductors | QorIQ Qonverge SoC, 6x1.2GHz Starcore DSP, 4x1.6GHz e6500 CPU, MAPLE-B3 accl, encrypted, -40-105C, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | |
| B4860NXN7QUMD | NXP Semiconductors | QorIQ Qonverge SoC, 6x1.2GHz Starcore DSP, 4x1.6GHz e6500 CPU, DDR3/3L, -40-105C, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
![]() Coilcraft Direct | MSS7348-682MEC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 5,582 | |
| MSS7348-683MEC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 1,672 | ||
| MSD1048-683MED | Coilcraft Inc | Power inductor, shielded, 10/20/30% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 1,266 | ||
| MSS1048-683MLC | Coilcraft Inc | Power inductor, shielded, 10/20/30% tol, SMT, RoHS RoHS : Compliant |
| 1,202 | ||
| MSS7348-684MEC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 362 | ||
| MSS7348-683MED | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| MSS1048-682MLD | Coilcraft Inc | Power inductor, shielded, 10/20/30% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| MSS1048-682NLC | Coilcraft Inc | Power inductor, shielded, 10/20/30% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | LM4865M/NOPB![]() | Texas Instruments | SOIC//1W BOOMER AUDIO AMP RoHS : Compliant | 45,001 | ||
| IRL7486MTRPBF | Infineon Technologies AG | Single N-Channel 40 V 1.25 mOhm 76 nC HEXFET® Power Mosfet - DirectFET® RoHS : Compliant | 33,600 | |||
SN65LVDT3486BDR![]() | Texas Instruments | IC QUAD LVDS RECEIVER 16-SOIC RoHS : Compliant | 25,197 | |||
LMX2486SQ/NOPB![]() | Texas Instruments | IC PLL FREQ SYNTH 1-4.5GHZ 24LLP RoHS : Compliant | 20,421 | |||
LM4863LQ/NOPB![]() | Texas Instruments | IC AMP AUDIO PWR 3.2W STER 24QFN RoHS : Compliant | 12,825 | |||
LM4861M/NOPB![]() | Texas Instruments | IC: audio amplifier; Pout: 1.1W; SO8 RoHS : Compliant | 6,514 | |||
ADM2486BRWZ-REEL![]() | Analog Devices Inc | IC: interface; digital isolator,transceiver; RS422 / RS485 RoHS : Compliant | 3,286 | |||
| FAN4860UC5X | onsemi | IC REG BST 5V 0.93A SYNC 6WLCSP RoHS : Compliant | 3,000 | |||
ADA4860-1YRJZ-RL7![]() | Analog Devices Inc | IC OPAMP CFA 520MHZ SOT23-6 RoHS : Compliant | 2,668 | |||
TPA4861DR![]() | Texas Instruments | IC AMP AUDIO PWR 1.1W MONO 8SOIC RoHS : Compliant | 2,500 | |||
| BU7486SFVM-TR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BU7486SF-E2 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BU7486F-E2 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BU7486FV-E2 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
BD4860G-TR![]() | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
![]() ComSIT USA | FAN48610BUC50X | FAIRCHILD SEMICONDUCTOR/ON SEMICONDUCTOR/ONSEMI | AVAILABLE EU | 4,276 | ||
| 57486774 | TE Connectivity | AVAILABLE EU | 137 | |||
| SI5350AB04868GMR | Silicon Labs Isolation Inc | AVAILABLE EU | 17,883 | |||
| ST3486 | PENINSULA COMPONENTS (PENCOM) | AVAILABLE EU | 278 | |||
![]() Interstate Connecting Components | 1486290000 | Weidmüller Interface GmbH & Co. KG | SL 7.62/08/90B 3.2SN GN BX RoHS : Compliant |
| 11 | |
| 09231486921 | HARTING Technology Group | DIN-SIGNAL 2C048MS-1C1-2 RoHS : Compliant |
| 4 | ||
| TTMS-4.8-6 | TE Connectivity | TTMS-4.8-6 A60289-000 RoHS : Compliant |
| 0 | ||
| 1-1372548-6 | TE Connectivity | FEEDING FINGER | 0 | |||
| 2-1879648-6 | TE Connectivity | H4P 33R2 0.5% 100PPM RoHS : Compliant |
| 0 | ||
| 202K232-4/86-0 | TE Connectivity | 538431-000 RoHS : Compliant |
| 0 | ||
| 342A024-4/86-0 | TE Connectivity | HEAT SHRINKABLE MOLDED PT 45 DEG SIDE BRKOUT TRANS RoHS : Compliant |
| 0 | ||
| 222D921-4/86-0 | TE Connectivity | 149895-000 RoHS : Compliant |
| 0 | ||
| 3-1658486-4 | TE Connectivity | MSB0.80RC-ASY112DP,GP,30,VCTY RoHS : Compliant |
| 0 | ||
| 3-641148-6 | TE Connectivity | 06P MTA156 ASSY 18AWG ORA LF RoHS : Compliant |
| 0 | ||
| 322A112-4/86-0 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 2405486-1 | TE Connectivity | INSERTION SLEEVE BT 700/752 1. | 0 | |||
| 2481486-1 | TE Connectivity | ASSY; MODULE; NANORF; 50 OHM B RoHS : Compliant | 0 | |||
| 382A012-4/86-0-CS8639 | TE Connectivity | 382A012-4/86-0-CS8639 | 0 | |||
| 165X14869X | Conec Corporation | RoHS : Compliant |
| 0 | ||
![]() NexGen Digital | SI4486EY-T1-E3 | Vishay Huntington | 4,592 | |||
| IS486E | Sharp Microelectronics of the Americas | 3,940 | ||||
LM4864MM/NOPB![]() | Texas Instruments | RoHS : Compliant | 1,000 | |||
| AT-41486-TR1 | Avago Technologies | RoHS : Not Compliant | 99 | |||
| 4548-632-SS | RAF Electronic Hardware | 24 | ||||
| 744862180 | Wurth Elektronik | RoHS : Compliant | 20 | |||
| 54-862-030 | Spectrum Control | 19 | ||||
AM486DX4-100V16BHC![]() | AMD | RoHS : Not Compliant | 8 | |||
![]() PEI Genesis | 778486 REV B | Amphenol Corporation |
| 4 | ||
| C10-564867-24FL | Amphenol Corporation |
| 2 | |||
| M39029/88-486 | Tri-Star Electronics International |
| 0 | |||
| M24308/2-486F | ITT Interconnect Solutions |
| 0 | |||
| M24308/2-486F | Amphenol Positronic |
| 0 | |||
| J486-104-.75A | SOURIAU-SUNBANK |
| 0 | |||
| S4861-3232-1.5-34 | SOURIAU-SUNBANK |
| 0 | |||
| 10-048667-10S | Amphenol Corporation |
| 0 | |||
| S4861-1816-1.5-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4861-1810-1.5-34 | SOURIAU-SUNBANK |
| 0 | |||
| 3164868-003 | SOURIAU-SUNBANK |
| 0 | |||
| C146-21R048-607-1 | Amphenol Tuchel |
| 0 | |||
| 10-564867-14Y | Amphenol Corporation |
| 0 | |||
| 274-8649-334 | ITT Interconnect Solutions |
| 0 | |||
| J486-2216-1.5C | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 284865-5 | TE Connectivity | Card Edge Connectors RoHS : Compliant |
| 32,585 | |
| 2-644861-6 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 2,200 | ||
| 3-641148-6 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 852 | ||
| 2-644486-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 659 | ||
| TTMS-4.8-6 | TE Connectivity | Connectors RoHS : Compliant |
| 461 | ||
| 3-644861-0 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 231 | ||
| 5148656-4 | TE Connectivity | TE COMPONENT (REF 5148656-4) |
| 198 | ||
| 342A024-4/86-0 | TE Connectivity | TFIT Poly Molded Parts RoHS : Compliant |
| 148 | ||
| 202K232-4/86-0 | TE Connectivity | MOLDED BOOT 202K232-4/86-0 RoHS : Compliant |
| 91 | ||
| 5748676-3 | TE Connectivity | DIE CAST STR REL-KIT RoHS : Compliant |
| 28 | ||
| CGT4866 | Hammond Manufacturing | TYPE 1 GUTTER TROUGH W/KO - 6 RoHS : Compliant |
| 17 | ||
| 09231486921 | HARTING Technology Group | DIN 41612 Connectors 48P 2A MALE R/A SLD RoHS : Compliant |
| 15 | ||
| 1486D36 | Hammond Manufacturing | NEMA12 WRG TROUGH36L RoHS : Compliant |
| 13 | ||
| 1486G24 | Hammond Manufacturing | N12 Wiring Trough - 12 x12 x 24 - Steel/ |
| 7 | ||
| 1486B48 | Hammond Manufacturing | NEMA12 WRG TROUGH48L RoHS : Compliant |
| 6 | ||
![]() PUI | 12.94486 | 4,430 | ||||
| 2348-64G00DPN4T-P | 328 | |||||
![]() Richardson RFPD | 54-863-007 | Spectrum Control | EMI LOW PASS FILTER RoHS : Not Compliant | 0 | ||
| 48-6-12 | Spectrum Control | High Power Fixed Coaxial Attenuator RoHS : Compliant |
| 0 | ||
| SI5351A-B04486-GTR | Skyworks Solutions Inc | Clock Generator 25MHz to 27MHz-IN 200MHz-OUT 10-Pi RoHS : Compliant | 0 | |||
| 1589486-1 | TE Connectivity | Conn Nano-D SKT 15 POS 0.635mm Solder ST SMD 15 Te RoHS : Not Compliant | 0 | |||
| 2-644861-6 | TE Connectivity | Conn Shrouded Header HDR 6 POS 2.54mm Solder ST Th RoHS : Compliant |
| 0 | ||
| 571PHC000486DG | Skyworks Solutions Inc | Oscillator VCXO 67.5MHz 1.5ppm (Tol) ±20ppm (Stabi RoHS : Compliant |
| 0 | ||
| 85192486 | HUBER+SUHNER | SENCITY Road MULTI Antenna RoHS : Compliant |
| 0 | ||
| 570NBA001486DGR | Skyworks Solutions Inc | Oscillator XO 700MHz ±31.5ppm LVDS 55% 3.3V 8-Pin RoHS : Compliant |
| 0 | ||
| R110434860 | Radiall | Conn MMCX 0Hz to 6GHz 50Ohm Solder ST SMD RCP Gold |
| 0 | ||
| 533AC000486DGR | Skyworks Solutions Inc | Oscillator XO 132.8125MHz/ 161.132812MHz ±20ppm LV RoHS : Compliant |
| 0 | ||
| SI5335D-B02486-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| 414048-6 | TE Connectivity | Conn SMB 0Hz to 4GHz 75Ohm Crimp RA Cable Mount PL RoHS : Compliant |
| 0 | ||
| 4248-63.75 | Spectrum Control | Phase Compensated GaAs Switched Programmable Atten RoHS : Compliant | 0 | |||
| 54-863-005 | Spectrum Control | Feed Through Capacitor RoHS : Not Compliant |
| 0 | ||
| 13421-486-EVB | Skyworks Solutions Inc | RF Evaluation Board RoHS : Compliant | 0 | |||
![]() Rutronik | Q65110A2486 | ams OSRAM Group | NPN PHOTO-TRANSISTOR SMT-SIDELE RoHS : Compliant |
| 4,000 | |
| MKP1848615914Y4 | Vishay Intertechnologies | FP 15uF 1100Vdc 5% P52,5 MKP RoHS : Compliant |
| 880 | ||
| C10-737486-3YS3 | Amphenol Interconnect Products Inc | 03P EPOWER PLUG FOR 6,0MM CAB RoHS : Compliant |
| 50 | ||
![]() Chip 1 Exchange | 42486-4 | TE Connectivity | INSTOCK RoHS : Compliant | 148,200 | ||
| 54861-1670 | Molex | INSTOCK RoHS : Compliant | 98,800 | |||
| 5748676-3 | TE Connectivity | INSTOCK RoHS : Compliant | 29,008 | |||
| 5748676-1 | TE Connectivity | INSTOCK RoHS : Compliant | 6,068 | |||
| 2-1734248-6 | TE Connectivity | INSTOCK RoHS : Compliant | 5,200 | |||
| FAN48619UC50X | onsemi | INSTOCK RoHS : Compliant | 3,601 | |||
| 5148655-5 | TE Connectivity | INSTOCK | 2,730 | |||
| 3-641148-6 | TE Connectivity | INSTOCK RoHS : Compliant | 1,678 | |||
| 748627200 | TE Connectivity | INSTOCK | 800 | |||
| 125-800-486TJS | Dubilier | INSTOCK | 764 | |||
| SP486ET-L/TR | MXL | INSTOCK | 713 | |||
| 242248680738 | Arrow Fastner Company | INSTOCK | 229 | |||
| 524864 | INSTOCK | 215 | ||||
| 09231486921 | HARTING Technology Group | INSTOCK RoHS : Compliant | 180 | |||
| 2222-048-68101 | Vishay Intertechnologies | INSTOCK | 65 | |||
![]() Avnet Asia | FAN48610UC50X | onsemi | 2.5 MHz, 1 A, Fixed-Output Synchronous TinyBoost? Regulator (Alt: FAN48610UC50X) RoHS : Compliant |
| 15,000 | |
| LCB TVSG-BXBY-7J8K-Z486-20-R18-ZKW | ams OSRAM Group | LED Single Chip Blue 470nm 50mA 2-Pin PLCC T/R (Alt: LCB TVSG-BXBY-7J8K-Z486-20-R18-ZKW) RoHS : Compliant |
| 10,000 | ||
| BD9486F-GE2 | ROHM Semiconductor | (Alt: BD9486F-GE2) RoHS : Compliant | 5,000 | |||
| LW TVSG.CB-AYCX-FK0PN0-Z486-20-R18-Z | ams OSRAM Group | LED Chip White 50mA x=0.33/y=0.33 2-Pin PLCC T/R (Alt: LW TVSG.CB-AYCX-FK0PN0-Z486-20-R18-Z) RoHS : Compliant | 0 | |||
| 2486390-2 | TE Connectivity | (Alt: 2486390-2) RoHS : Compliant | 0 | |||
| 2486648-1 | TE Connectivity | (Alt: 2486648-1) RoHS : Compliant | 0 | |||
| SLG4B48691V | Renesas Electronics Corporation | CONFIGURABLE MIXED-SIGNAL IC (Alt: SLG4B48691V) RoHS : Compliant | 0 | |||
| 2548628-1 | TE Connectivity | ROBOCORE HYBRID 2+4 HDR H ASSEMBLY (Alt: 2548628-1) RoHS : Compliant | 0 | |||
| 2486657-1 | TE Connectivity | (Alt: 2486657-1) RoHS : Compliant | 0 | |||
| FAN48623UC50GX | onsemi | 2500 mA, Synchronous TinyBoost? Regulator with Bypass Mode (Alt: FAN48623UC50GX) RoHS : Compliant |
| 0 | ||
| MMC-486-16.000MHZ-T | MMD | (Alt: MMC-486-16.000MHZ-T) RoHS : Compliant | 0 | |||
| 2486390-8 | TE Connectivity | (Alt: 2486390-8) RoHS : Compliant | 0 | |||
| 10194869-002LF | Amphenol Corporation | (Alt: 10194869-002LF) RoHS : Compliant | 0 | |||
| FAN48610BUC50X | onsemi | 2.5 MHz, 1 A, Fixed-Output Synchronous TinyBoost? Regulator (Alt: FAN48610BUC50X) RoHS : Compliant | 0 | |||
| ENGFAN48600UCA2X | onsemi | (Alt: ENGFAN48600UCA2X) RoHS : Compliant | 0 | |||
![]() Avnet Silica | STM32L486VGT3 | STMicroelectronics | ARM Based Microcontroller 32Bit 2V to 36V RISC 80MHz 100Pin LQFP Surface Mount (Alt: STM32L486VGT3) RoHS : Compliant | 360 | ||
| IS486E | Sharp Microelectronics of the Americas | Photodetector Optoschmitt 3Pin (Alt: IS486E) RoHS : Compliant | 0 | |||
| QPA4486ATR13 | Qorvo | (Alt: QPA4486ATR13) RoHS : Compliant | 0 | |||
| FAN4860UC54X | onsemi | (Alt: FAN4860UC54X) RoHS : Compliant | 0 | |||
| FAN48610UC50X | onsemi | 25 MHz 1 A FixedOutput Synchronous TinyBoost Regulator (Alt: FAN48610UC50X) RoHS : Compliant | 0 | |||
| MCP6486T-E/OT | Microchip Technology Inc | OP Amp Single 20Vus 18V to 55V 5Pin SOT23 TR (Alt: MCP6486T-E/OT) RoHS : Compliant | 0 | |||
| FAN48619UC50X | onsemi | FixedOutput Synchronous TinyBoost Regulator (Alt: FAN48619UC50X) RoHS : Compliant | 0 | |||
| STM32L486RGT7 | STMicroelectronics | STMSTM32L486RGT7 (Alt: STM32L486RGT7) RoHS : Compliant | 0 | |||
| FAN48630UC33X | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC33X) RoHS : Compliant | 0 | |||
| FAN48623UC50GX | onsemi | 2500 mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48623UC50GX) RoHS : Compliant | 0 | |||
| FAN48610BUC50X | onsemi | 25 MHz 1 A FixedOutput Synchronous TinyBoost Regulator (Alt: FAN48610BUC50X) RoHS : Compliant | 0 | |||
| FAN48695UC190X | onsemi | 25 MHz FixedOutput Synchronous TinyBoost Regulator (Alt: FAN48695UC190X) RoHS : Compliant | 0 | |||
| STM32L486VGT3TR | STMicroelectronics | (Alt: STM32L486VGT3TR) RoHS : Compliant | 0 | |||
| STM32L486RGT6TR | STMicroelectronics | MCU 32Bit STM32L486RG ARM Cortex M4F RISC 1MB Flash 18V25V33V 64Pin LQFP TR (Alt: STM32L486RGT6TR) RoHS : Compliant | 0 | |||
AM486DX4-100V16BHI![]() | AMD | MPU AM486 CISC 32Bit 100MHz 33V 208Pin SQFP (Alt: AM486DX4-100V16BHI) RoHS : Not Compliant | 0 | |||
![]() Braemac Americas-Symmetry | EB_NN02-224-868 | Ignion | RUN mXTENDTM 1 Port 868 MHz |
| 0 | |
| AMSRL-486.5Z | Aimtec | RoHS : Compliant |
| 0 | ||
| ACAG1204-868-EVB | Abracon Corporation |
| 0 | |||
| AMSRL-486.5ZTR | Aimtec | RoHS : Compliant |
| 0 | ||
ACAG1204-868-T![]() | Abracon Corporation | RF ANT 868MHZ CHIP SOLDER SMD RoHS : Compliant |
| 0 | ||
| GW11048-6 | Gateworks Corporation | u-blox Precision GPS Development Kit |
| 0 | ||
| EB_NN02-224-868-915 | Ignion | RUN mXTENDTM 1 Port 868-915 MHz |
| 0 | ||
![]() Chip-Germany GmbH | MP48 6STGBU | MPE-Garry GmbH | 112 | |||
| 6ES7648-6AA03-3YA0 | Siemens | 1 | ||||
![]() Component Electronics, Inc | LTC486CSW![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3,149 | |
| 1N486B | Bkc Semiconductors Inc | IN STOCK SHIP TODAY | 785 | |||
| 3448-6201 | 3M | IN STOCK SHIP TODAY |
| 198 | ||
| 3448-63 | 3M | IN STOCK SHIP TODAY |
| 120 | ||
| DS3486MX | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 80 | ||
| 7-382486-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 70 | ||
MC3486N![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 53 | ||
| SGA-6486 | SIERNA | IN STOCK SHIP TODAY |
| 35 | ||
| SC84486P | Motorola Semiconductor Products | IN STOCK SHIP TODAY | 25 | |||
| 5748678-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| 7486PC | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 20 | |||
AM486DX2-66V16BHC![]() | AMD | IN STOCK SHIP TODAY RoHS : Not Compliant | 15 | |||
| 165X14869X | Conec Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 11 | ||
| 09-06-248-6848 | HARTING Technology Group | IN STOCK SHIP TODAY |
| 10 | ||
| 5748676-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
![]() ECCO | 0310486121 | ITT Interconnect Solutions |
| 4,531 | ||
| 031-0486-121 | ITT Interconnect Solutions |
| 4,531 | |||
| 031-0486-081 | ITT Interconnect Solutions |
| 1,201 | |||
| 0310486001 | ITT Interconnect Solutions |
| 1 | |||
| 031-0486-001 | ITT Interconnect Solutions |
| 1 | |||
![]() FDH Electronics | BMS1348-61-2-22-004 | Judd Wire | Wire and Cable |
| 5,210 | |
| 324486 | TE Connectivity | Terminals & Spl RoHS : Compliant |
| 2,180 | ||
| 202D232-4/86-0 | TE Connectivity | Heat Shrink Prd RoHS : Compliant |
| 120 | ||
| TAPE ASTM 5486 | FDH Electronics | Wire Placehldr | 70 | |||
| 2486513-1 | TE Connectivity | RF / Coaxial | 41 | |||
| 14861-0000-B2 | BJG Electronics | Cable Assembly | 10 | |||
| 5748676-1 | TE Connectivity | Connector Acc RoHS : Compliant |
| 2 | ||
| 342A024-4/86-0 | TE Connectivity | Harness Mgmt RoHS : Compliant | 0 | |||
| 222D921-4/86-0 | TE Connectivity | Harness Mgmt RoHS : Compliant | 0 | |||
| 322A112-4/86-0 | TE Connectivity | Harness Mgmt RoHS : Compliant | 0 | |||
| 362A014-4/86-0 | TE Connectivity | Harness Mgmt RoHS : Compliant | 0 | |||
| 202D242-4/86-0 | TE Connectivity | Harness Mgmt RoHS : Compliant | 0 | |||
| 414048-6 | TE Connectivity | Connector RoHS : Compliant | 0 | |||
| 202D263-4/86-0 | TE Connectivity | Harness Mgmt RoHS : Compliant | 0 | |||
| 202D211-4/86-0 | TE Connectivity | Heat Shrink Prd RoHS : Compliant |
| 0 | ||
![]() Flip Electronics | FAN48610BUC50X | onsemi | Stock, Ship Today RoHS : Compliant |
| 972,000 | |
| FAN48685UC08X | onsemi | Stock, Ship Today RoHS : Compliant | 124,071 | |||
| FAN48614BUC50X | onsemi | Stock, Ship Today RoHS : Compliant | 123,000 | |||
| FAN4860UMP5X | onsemi | Stock, Ship Today RoHS : Compliant |
| 33,000 | ||
| NCL30486A1DR2G | onsemi | Stock, Ship Today | 14,905 | |||
| NVD5C486NT4G | onsemi | Stock, Ship Today RoHS : Compliant | 10,000 | |||
| FAN48610BUC33X | onsemi | Stock, Ship Today RoHS : Compliant |
| 8,037 | ||
| 1N486B-T50A | onsemi | Stock, Ship Today |
| 5,000 | ||
| B4860NSN7QUMD | NXP Semiconductors | Stock RoHS : Compliant | 4,348 | |||
| B4860NSE7QUMD | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 4,348 | ||
| B486ENSE7QUMD | NXP Semiconductors | Stock | 2,642 | |||
| SI5340D-D13486-GM | Skyworks Solutions Inc | Stock | 908 | |||
| B4860NXN7QUMD | NXP Semiconductors | Stock RoHS : Compliant | 71 | |||
| B4860NXE7QUMD | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 61 | ||
| B486BNSE7QUMD | NXP Semiconductors | Stock | 10 | |||
![]() Maritex | 2324869-2 | TE Connectivity | Plug-in Connector Accessories; 2324869-2; TE CONNECTIVITY; Yes; 500 mA RoHS : Compliant |
| 4,100 | |
| FAN48618BUC53X | onsemi | DC DC Converters; FAN48618BUC53X; ON SEMICONDUCTOR; Boost; 1.215 mm RoHS : Compliant |
| 3,000 | ||
LM4861MX/NOPB![]() | Texas Instruments | Multimedia Amplifiers; LM4861MX/NOPB; TEXAS INSTRUMENTS; 8; 1.75 mm; 3.91 mm; 4.9 mm RoHS : Compliant |
| 2,285 | ||
| 2414-001-2486 | TE Connectivity | Automotive Connectors; 2414-001-2486; TE CONNECTIVITY; Black; 47; Yes RoHS : Compliant |
| 1,750 | ||
| 5748676-1 | TE Connectivity | D-Sub Backshells; 5748676-1; TE CONNECTIVITY; 9; 3 m; Metal; Silver RoHS : Compliant |
| 878 | ||
| FAN48685UC08X | onsemi | DC DC Converters; FAN48685UC08X; ON SEMICONDUCTOR RoHS : Compliant |
| 750 | ||
| MAX1486EUB+T | Analog Devices Inc | Other Interface ICs; MAX1486EUB+T; ANALOG DEVICES; 10; UMAX RoHS : Compliant |
| 297 | ||
| 09052486831 | HARTING Technology Group | DIN 41612 Connectors; 09052486831; HARTING; Panel, Through Hole; Straight; 5.08 mm; Solder RoHS : Compliant |
| 82 | ||
| 9061486901 | HARTING Technology Group | DIN 41612 Connectors; 9061486901; HARTING; Right Angle; 5.08 mm; Solder; Through Hole |
| 30 | ||
| SYS1548-6515-T2 | Sunny Electronics Corp | Power Supply; desktop; 65W; 15V; 0-4.33A |
| 30 | ||
| 5748677-2 | TE Connectivity | D-Sub Backshells; 5748677-2; TE CONNECTIVITY; 15; Silver; 15; No RoHS : Compliant |
| 13 | ||
| SYS1548-6512-T2 | Sunny Electronics Corp | Power Supply; desktop; 65W; 12V; 0-5.42A |
| 7 | ||
| SYS1548-6512-T3 | Sunny Electronics Corp | Power Supply; desktop; 65W; 12V; 0-5.42A |
| 5 | ||
| SYS1548-6524-T2 | Sunny Electronics Corp | Power Supply; desktop; 65W; 24V; 0-2.71A |
| 3 | ||
| F14486_FLORENCE-Z30 | LEDIL | LEDIL Lens F14486_FLORENCE-Z30, 28 degree, W: 61x286mm, H: 8.5mm, RoHS |
| 2 | ||
![]() Master Electronics | 3-641148-6 | TE Connectivity | 06P MTA156 ASSY 18AWG ORA LF RoHS : Compliant |
| 1,791 | |
| 202K232-4/86-0 | TE Connectivity | 202K232-4/86-0 RoHS : Compliant |
| 138 | ||
2700486![]() | Phoenix Contact | Nanoline Base Unit Equipped with 8 digital inputs and 4 relay output channels RoHS : Compliant |
| 1 | ||
| 486 | Philmore | TRIGGER COIL RoHS : Compliant |
| 0 | ||
| ST400-486 | Thomas & Betts | ST Star Teck® Series Cable Gland - NPT Thread Size 4 - Dia 4.120-4.340 Inch - Material Copper Free Aluminum - Color Silver RoHS : Compliant |
| 0 | ||
| TW-15-12-G-D-486-157 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-22-07-F-D-486-SM-A | Samtec Inc | Flexible Board Stacking Header 2.00Mm Pitch Rohs Compliant: Yes |Samtec TW-22-07-F-D-486-SM-A RoHS : Compliant |
| 0 | ||
0830486![]() | Phoenix Contact | Label - Roll - yellow - unlabeled - can be labeled with: THERMOMARK ROLLMASTER 300/600 - THERMOMARK X1.2 - THERMOMARK ROLL X1 - THERMOMARK ROLL 2.0 - THERMOMARK ROLL - mounting type: adhesive - lettering field size: 75 x 10 mm - Number of individual labels: 2500 RoHS : Compliant |
| 0 | ||
| 2-1879648-6 | TE Connectivity | H4P 33R2 0.5% 100PPM RoHS : Compliant |
| 0 | ||
| 342A024-4/86-0 | TE Connectivity | Heat Shrink Transition Polyolefin Automotive MOQ Reduction RoHS : Compliant |
| 0 | ||
| 348-6556-000 | ITT Interconnect Solutions | Itt Cannon |Itt Cannon 348-6556-000 RoHS : Compliant |
| 0 | ||
| 274-8650-001 | ITT Interconnect Solutions | CT274-8650-001 RoHS : Compliant |
| 0 | ||
| 3-1658486-4 | TE Connectivity | MSB0.80RC-ASY112DP GP 30 VCTY MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3-4868-012A | Eaton Cutler-Hammer | Selector Switch Actuator Suitable for Moeller RMQ RoHS : Compliant |
| 0 | ||
| 322A112-4/86-0 | TE Connectivity | Heat Shrink Transition Polyolefin Flexible Modified Bright Tin Over Copper MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 09231486921 | HARTING Technology Group | Conn DIN 41612 M 48 POS 2.54mm Solder RA Thru-Hole RoHS : Compliant |
| 50 | |
| 2486070000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Power Supplies PRO DM 10 RoHS : Compliant |
| 50 | ||
| 1190486 | Phoenix Contact | Headers & Wire Housings PC 6/ 2-G-7,62 P26THR RoHS : Compliant |
| 50 | ||
| 5748676-3 | TE Connectivity | Cable Clamp Kit, Hood D-Sub 25Pos StraightExit AMP Die-CastMetal 0.255-0.470In.CblDia Shielded RoHS : Compliant |
| 50 | ||
| 1082486 | Phoenix Contact | Fixed Terminal Blocks PTFIX 6X10/S-NS35A BK RoHS : Compliant |
| 50 | ||
| 5748677-2 | TE Connectivity | Hood D-Sub 15Pos StraightExit AMP MetallizedPlastic 0.185-0.320In.CblDia Shield RoHS : Compliant |
| 50 | ||
| 4860P-250G | MG Chemicals | Solder Sn63/PB37 No Clean Solder Paste, Type 3 |
| 39 | ||
| 21348600484050 | HARTING Technology Group | Sensor Cables / Actuator Cables M12-A 4PIN FML RA SINGLE END 5.0M PVC |
| 20 | ||
| 09051486972 | HARTING Technology Group | DIN 41612 Connectors E048MS-3,0C1-2-V1 |
| 12 | ||
| 50426486 | WIKA Instrument LP | Wika Instruments 50426486 Pressure Sensor For Oil 1000psi Max Pressure 8 - 30 V dc IP65 |
| 8 | ||
2700486![]() | Phoenix Contact | Controllers NLC-055-012D- 08I-04QRD-05A RoHS : Compliant |
| 2 | ||
| 274866-100134 | PEPPERL + FUCHS AUTOMATION | ENA36HD-S10SA9-0016B20-RBD, Rotary Encoders - Absolute |
| 2 | ||
| 3-123-486 | Schurter Electronic Components | Power Line Filters FMBC EP,180A, 520VAC, Screw Clamps, Industrial version , 2-Stage, 3-Phase Block Filter, 4D Housing RoHS : Compliant |
| 2 | ||
| J4860B-AX | Axiom Manufacturing | Axiom J4860B Mini GBIC Module |
| 0 | ||
| AXG94865 | Axiom Manufacturing | AXIOM MPO-MPO OM3 F/M FIBER CABLE 3M |
| 0 | ||
![]() Pasternack Enterprises US | PE34862LF | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50. FME Jack to BNC Male Cable Using RG58 Coax, RoHS. PE34862LF is a FME jack to BNC male cable using RG58 coax. This Pasternack FME jack to BNC male cable assembly uses a 50 Ohm FME for connector 1 and a 50 Ohm BNC for connector 2. Our jack FME to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34862LF FME jack to BNC male cable assembly is constructed with RG58 coax. | 2,304 | ||
| PE34862LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 60 inches. FME Jack to BNC Male Cable 60 Inch Length Using RG58 Coax, RoHS., Radio frequency assembly FME jack to BNC male cable 60 inch length using RG58 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME jack to BNC male cable 60 inch length using RG58 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and BNC cable connection on the other. Our FME to BNC cable assemblies have a jack gender on end 1 and male on end 2. This FME to BNC cable is a jack to male coax assembly, PE34862LF-60, can also be known as a FME female to BNC plug cable assembly and will be shipped same-day as it is purchased. FME female to BNC plug cable assembly PE34862LF-60 is built with RG58 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34862LF-60 can also be used in the other direction and will be BNC male to FME jack cable assembly if the opposite connectivity is required. FME female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to BNC cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to BNC male cable 60 inch length using RG58 coax, RoHS. |
| 384 | ||
| PE34862-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 12 inches. FME Jack to BNC Male Cable 12 Inch Length Using RG58 Coax., Radio frequency assembly FME jack to BNC male cable 12 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME jack to BNC male cable 12 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and BNC cable connection on the other. Our FME to BNC cable assemblies have a jack gender on end 1 and male on end 2. This FME to BNC cable is a jack to male coax assembly, PE34862-12, can also be known as a FME female to BNC plug cable assembly and will be shipped same-day as it is purchased. FME female to BNC plug cable assembly PE34862-12 is built with RG58 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34862-12 can also be used in the other direction and will be BNC male to FME jack cable assembly if the opposite connectivity is required. FME female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to BNC cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to BNC male cable 12 inch length using RG58 coax. |
| 384 | ||
| PE33486-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to SMA Male Cable 60 Inch Length Using RG393 Coax., Radio frequency assembly SMA male to SMA male cable 60 inch length using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 60 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has male gender on end 1 and male on end 2. PE33486-60 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. SMA plug to SMA plug cable assembly PE33486-60 is built with RG393 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33486-60 RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3M0248-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL-27478, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 60 inches. Temperature Conditioned N Male to N Female Bulkhead Low Loss Cable 60 Inch Length Using PE-P300LL Coax., Pasternack temperature conditioned N male to N female bulkhead low loss cable 60 inch length using PE-P300LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0248-60 is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability type N to N type cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with type N connection on one end and type N connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly. PE3M0248-60 can also be known as a temperature conditioned low loss type N plug to N type jack cable assembly and will be shipped the same day after it is purchased. type N plug to type N jack cable assembly PE3M0248-60 is built with PE-P300LL which is a flexible coax. The Pasternack flexible type N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency type N male to type N female cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0248-60 can be used in the other direction and will be N type female to type N male cable assembly. Pasternack high reliability low loss type N plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for same-day shipment worldwide. Variations of PE44809 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned N male to N female bulkhead low loss cable 60 inch length using PE-P300LL coax. |
| 0 | ||
| PE3W14864 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm. Snap-On QMA Male to N Male Right Angle Cable Using LMR-200-FR Coax. PE3W14864 is a QMA male to N male right angle cable using LMR-200-FR coax. This Pasternack QMA male to N male right angle cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm N for connector 2. QMA to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male QMA to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14864 QMA male to N male right angle cable assembly is constructed with LMR-200-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W23486 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. SMA Female 2 Hole Flange to MMCX Plug Cable Using PE-047SR Tan Coax. PE3W23486 is a SMA female 2 hole flange to MMCX plug cable using PE-047SR coax. This Pasternack SMA female 2 hole flange to MMCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MMCX for connector 2. Our female SMA 2 hole flange to plug MMCX cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W23486 SMA female 2 hole flange to MMCX plug cable assembly is constructed with PE-047SR coax. | 0 | |||
| PE3C10448-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Female Bulkhead to 1.85mm Male Cable 6 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 1.85mm male cable 6 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 1.85mm male cable 6 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a 1.85mm cable connection on the other. Our 2.92mm to 1.85mm cable assembly has a female gender on end 1 and a male on end 2. PE3C10448-6 can also be known as a 2.92mm jack to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. 2.92mm jack to 1.85mm plug cable assembly PE3C10448-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method, while the other has the clamp/solder attachment method and a stainless steel body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10448-6 can also be used in the other direction and will be a 1.85mm male to 2.92mm female bulkhead cable assembly if the opposite connectivity is required. 2.92mm jack bulkhead to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 1.85mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C4486-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMA Female Bulkhead to SSMC Plug Right Angle Cable 72 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA female bulkhead to SSMC plug right angle cable 72 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SSMC plug right angle cable 72 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle SSMC cable connection on the other. Our SMA to right angle SSMC cable assemblies have a female gender on end 1 and plug on end 2. This SMA to SSMC cable is a female to plug coax assembly, PE3C4486-72, can also be known as a SMA jack to right angle SSMC male cable assembly and will be shipped same-day as it is purchased. SMA jack to SSMC male cable assembly PE3C4486-72 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA female bulkhead to SSMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4486-72 can also be used in the other direction and will be right angle SSMC plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SSMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SSMC plug right angle cable 72 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3C4867-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 24 inches. Slide-On BMA Jack 2 Hole Flange to SMP Female Cable 24 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to SMP female cable 24 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to SMP female cable 24 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and SMP cable connection on the other. Our BMA to SMP cable assemblies have a jack gender on end 1 and female on end 2. This BMA to SMP cable is a jack to female coax assembly, PE3C4867-24, can also be known as a BMA female to SMP jack cable assembly and will be shipped same-day as it is purchased. BMA female to SMP jack cable assembly PE3C4867-24 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA jack 2 hole flange to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4867-24 can also be used in the other direction and will be SMP female to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMP cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to SMP female cable 24 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3W14863 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. N Male to QMA Male Cable Using TFT-5G-402 Coax. PE3W14863 is a N male to QMA male cable using TFT-5G-402 coax. This Pasternack N male to QMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. Our male N to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14863 N male to QMA male cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE34860-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FME, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 60 inches. FME Jack to FME Jack Cable 60 Inch Length Using RG174 Coax., Radio frequency assembly FME jack to FME jack cable 60 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME jack to FME jack cable 60 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to FME cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and FME cable connection on the other. Our FME to FME cable assemblies have a jack gender on end 1 and jack on end 2. This FME to FME cable is a jack to jack coax assembly, PE34860-60, can also be known as a FME female to FME female cable assembly and will be shipped same-day as it is purchased. FME female to FME female cable assembly PE34860-60 is built with RG174 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to FME cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME jack to FME jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. FME female to FME female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to FME cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to FME jack cable 60 inch length using RG174 coax. |
| 0 | ||
| PE34148-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to N Female Bulkhead Cable 60 Inch Length Using PE-047SR Coax., Radio frequency assembly SMA male to N female bulkhead cable 60 inch length using PE-047SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N female bulkhead cable 60 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our SMA to N type cable assemblies have a male gender on end 1 and female on end 2. This SMA to N type cable is a male to female coax assembly, PE34148-60, can also be known as a SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE34148-60 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34148-60 can also be used in the other direction and will be N type female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead cable 60 inch length using PE-047SR coax. |
| 0 | ||
| PE34866-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 72 inches. FME Jack to BNC Male Cable 72 Inch Length Using RG174 Coax., Radio frequency assembly FME jack to BNC male cable 72 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME jack to BNC male cable 72 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and BNC cable connection on the other. Our FME to BNC cable assemblies have a jack gender on end 1 and male on end 2. This FME to BNC cable is a jack to male coax assembly, PE34866-72, can also be known as a FME female to BNC plug cable assembly and will be shipped same-day as it is purchased. FME female to BNC plug cable assembly PE34866-72 is built with RG174 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34866-72 can also be used in the other direction and will be BNC male to FME jack cable assembly if the opposite connectivity is required. FME female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to BNC cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to BNC male cable 72 inch length using RG174 coax. |
| 0 | ||
| PE3C4866-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Plug Bulkhead to SMP Female Cable 60 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to SMP female cable 60 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to SMP female cable 60 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and SMP cable connection on the other. Our BMA to SMP cable assemblies have a plug gender on end 1 and female on end 2. This BMA to SMP cable is a plug to female coax assembly, PE3C4866-60, can also be known as a BMA male to SMP jack cable assembly and will be shipped same-day as it is purchased. BMA male to SMP jack cable assembly PE3C4866-60 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA plug bulkhead to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4866-60 can also be used in the other direction and will be SMP female to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMP cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to SMP female cable 60 inch length using PE-SR405FLJ coax. |
| 0 | ||
![]() TE Connectivity | 3-644861-0 | TE Connectivity | 10P MTA100 SHRD HDR,W/O PEG SN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 10 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 10 | Polyester Vertical PCB Header: 2.54Mm & Shrouded & Mta 100 | Part Number: 3-644861-0 | Internal Number: 3-644861-0 | TE Connectivity RoHS : Compliant |
| 5,230 | |
| 2-1734248-6 | TE Connectivity | 1.0 FPC, ZIF V/T, SMT, 26P Centerline (Pitch): .039 in Centerline (Pitch): 1 mm Insertion Force Type: Zero Insertion Force (ZIF) PCB Mount Orientation: Vertical Termination Method to PCB: Surface Mount 0.039" 1 mm Zero Insertion Force (ZIF) Vertical | Fpc Connector | Part Number: 2-1734248-6 | Internal Number: 2-1734248-6 | .039" | TE Connectivity RoHS : Compliant |
| 4,893 | ||
| 2-644486-3 | TE Connectivity | 03P MTA100 SHRDED HDR ASSY SN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 3 | Polyester Vertical PCB Header: 2.54Mm & Shrouded & Mta 100 | Part Number: 2-644486-3 | Internal Number: 2-644486-3 | TE Connectivity RoHS : Compliant |
| 2,847 | ||
| 2-644861-6 | TE Connectivity | 06P MTA100 SHRD HDR,W/O PEG SN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 6 | Polyester Vertical PCB Header: 2.54Mm & Shrouded & Mta 100 | Part Number: 2-644861-6 | Internal Number: 2-644861-6 | TE Connectivity RoHS : Compliant |
| 1,629 | ||
| 324486 | TE Connectivity | SPARE WIRE CAP,BLU .120-.145 INS. Primary Product Color: Blue Splice Type: Closed End Splice Insulation Option: Fully Insulated Sealable: No Contact Base Material: Copper Blue Closed End Splice Fully Insulated | Electrical Wire Splice | Part Number: 324486 | Internal Number: 324486 | Copper | TE Connectivity RoHS : Compliant |
| 910 | ||
| 3-641148-6 | TE Connectivity | 06P MTA156 ASSY 18AWG ORA LF Number of Positions: 6 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: Without Mating Retention: With Standard Rectangular Connector | 6 Receptacle Connector Assembly Without | Part Number: 3-641148-6 | Internal Number: 3-641148-6 | TE Connectivity RoHS : Compliant |
| 765 | ||
| 2486506-1 | TE Connectivity | BNC M Str Crimp RG-161, 179, 187 75 Ohm RF Interface: BNC RF Connector Style: Plug RF Connector Mated Outer Diameter (Approximate): .57 in RF Connector Mated Outer Diameter (Approximate): 14.5 mm Impedance: 50 Ω BNC Plug .57" 14.5 mm | Coax Connector | Part Number: 2486506-1 | Internal Number: 2486506-1 | TE Connectivity RoHS : Compliant |
| 494 | ||
| 3-644486-4 | TE Connectivity | 14P MTA100 SHRDED HDR ASSY SN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 14 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 14 | Polyester Vertical PCB Header: 2.54Mm & Shrouded & Mta 100 | Part Number: 3-644486-4 | Internal Number: 3-644486-4 | TE Connectivity RoHS : Compliant |
| 441 | ||
| 2486510-1 | TE Connectivity | N Jack Str Bulkhead Solder .141 S/R 18G RF Interface: N Type RF Connector Style: Jack RF Connector Mated Outer Diameter (Approximate): .61 in RF Connector Mated Outer Diameter (Approximate): 15.5 mm Impedance: 50 Ω N Type Jack .61" 15.5 mm | Coax Connector | Part Number: 2486510-1 | Internal Number: 2486510-1 | TE Connectivity RoHS : Compliant |
| 100 | ||
| 2-2308348-6 | TE Connectivity | CRIMP FLANGE 16 LARGE Strain Relief Accessory Type: Crimp Flange Thread Size: None Packaging Method: Package Packaging Quantity: 1 Operating Temperature Range: -40 – 194 °F Crimp Flange Package 1 | Crimp Flange For Size 4-5 Std/5Ql Shell | Part Number: 2-2308348-6 | Internal Number: 2-2308348-6 | TE Connectivity RoHS : Compliant |
| 96 | ||
| 414048-6 | TE Connectivity | CABLE PLUG,FEMALE,RTANG SMB Coax Connector | Part Number: 414048-6 | Internal Number: 414048-6 | TE Connectivity RoHS : Compliant |
| 60 | ||
| 208486-1 | TE Connectivity | CMC PLUG ASSEMBLY,SZ 22 Number of Positions: 14 Connector Product Type: Housing Operating Voltage: 600 VDC Wire Size: 30 – 14 AWG Wire Size: .05 – .2 mm² Circular Power Connector | 14 Housing 600 VDC 30 – 14 AWG | Part Number: 208486-1 | Internal Number: 208486-1 | TE Connectivity RoHS : Compliant |
| 42 | ||
| 2486513-1 | TE Connectivity | N Jack to SMA Jack Str Flange SUS 18GHz Connector Interface Adapter Type: Between Series Adapter Body Orientation: Straight Side A Interface: SMA Side A Gender: Jack Side B Interface: N Type Between Series Adapter Straight SMA Jack | Connector Adapters & Connector Saver | Part Number: 2486513-1 | Internal Number: 2486513-1 | TE Connectivity RoHS : Compliant |
| 39 | ||
| 207486-2 | TE Connectivity | RECEPT,SZ 23-16,CPC Number of Positions: 16 Connector Product Type: Housing Operating Voltage: 600 VDC Connector System: Wire-to-Wire Sealable: No Circular Power Connector | 16 Housing 600 VDC Wire-to-Wire | Part Number: 207486-2 | Internal Number: 207486-2 | TE Connectivity RoHS : Compliant |
| 35 | ||
| DRCP24-86PA | TE Connectivity | REC, 86P, BLK, 12/20, A Nominal Voltage Architecture: 12 V 24 V Number of Positions: 86 Connector & Housing Type: Housing for Male Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm 2.39 mm Automotive Housing | 12 V 86 Housing for Male Terminals | Part Number: DRCP24-86PA | Internal Number: DRCP24-86PA | 1.02 mm | TE Connectivity RoHS : Compliant |
| 23 | ||
![]() Vyrian | 3048632 | Phoenix Contact | Fuses/Accessories RoHS : Compliant | 13,228 | ||
| 1894862 | Phoenix Contact | Modular Terminal Block, 4A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 9,918 | |||
| TI486SLC-V20 | Texas Instruments | RISC Microprocessor, 32-Bit, 20MHz, CMOS, PQFP100 | 9,682 | |||
| MAX3486ECSA+T | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8 RoHS : Compliant | 9,664 | |||
| TX486SXL2B-050-PCE | Texas Instruments | 9,236 | ||||
| LTC486IN#TRPBF | Analog Devices Inc | Line Driver, 4 Func, 4 Driver, CMOS, PDSO16 RoHS : Compliant | 9,163 | |||
| TMC5748639DTR | Texas Instruments | 9,162 | ||||
| 7-382486-2 | TE Connectivity | PCB Connector, 72 Contact(s), 1 Row(s), Female, Right Angle, 0.05 inch Pitch, Solder Terminal, Latch, Socket RoHS : Not Compliant | 8,940 | |||
| 1848639 | Phoenix Contact | Barrier Strip Terminal Block, 10A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 8,764 | |||
| 2N4869A | Texas Instruments | Transistor | 6,903 | |||
| SN5486N | Texas Instruments | XOR Gate, 4-Func, 2-Input, TTL, PDIP14 RoHS : Not Compliant | 6,710 | |||
LM4865MX![]() | Texas Instruments | Volume Control Circuit, 1 Channel(s), PDSO8 RoHS : Not Compliant | 3,979 | |||
| TI486DLC-40GB | Texas Instruments | RISC Microprocessor, 32-Bit, 40MHz, CMOS, CPGA132 RoHS : Not Compliant | 3,362 | |||
| KTN486I16 | Kingston Technology Company | 2,391 | ||||
| 1824860 | Phoenix Contact | Barrier Strip Terminal Block RoHS : Compliant | 455 | |||
![]() Waytek, Inc. | 148604-91W | General Cable Technologies Corporation | 18GA SXL Red Cross-Link Automotive Wire XLPE -51C to 125C |
| 57,000 | |
| 148605-91W | General Cable Technologies Corporation | 18GA SXL Blue Cross-Link Automotive Wire XLPE -51C to 125C |
| 33,000 | ||
| 148606-91W | General Cable Technologies Corporation | 18GA SXL White Cross-Link Automotive Wire XLPE -51C to 125C |
| 26,500 | ||
| 148607-91W | General Cable Technologies Corporation | 18GA SXL Orange Cross-Link Automotive Wire XLPE -51C to 125C |
| 25,000 | ||
| 148630-91W | General Cable Technologies Corporation | 10GA SXL Red Cross-Link Automotive Wire XLPE -51C to 125C |
| 15,000 | ||
| 148603-91W | General Cable Technologies Corporation | 18GA SXL Brown Cross-Link Automotive Wire XLPE -51C to 125C |
| 14,000 | ||
| 148602-91W | General Cable Technologies Corporation | 16GA SXL Blue Cross-Link Automotive Wire XLPE -51C to 125C |
| 11,500 | ||
| 148670-91W | General Cable Technologies Corporation | 12GA SXL Black Cross-Link Automotive Wire XLPE -51C to 125C |
| 10,500 | ||
| 148671-91W | General Cable Technologies Corporation | 12GA SXL Red Cross-Link Automotive Wire XLPE -51C to 125C |
| 10,500 | ||
| 148601-91W | General Cable Technologies Corporation | 12GA SXL Green Cross-Link Automotive Wire XLPE -51C to 125C |
| 10,000 | ||
| 148628-91 | General Cable Technologies Corporation | 10GA SXL Green Cross-Link Automotive Wire XLPE -51C to 125C |
| 3,750 | ||
| 48610 | Cole Hersee | Cole Hersee Flexmod 48610 Low Voltage Disconnect IP67 12V 24V DC use PN 38178 |
| 8 | ||
![]() Win Source Electronics | FAN48610BUC50X | Fairchild Semiconductor Corporation | IC REG BOOST 5V 1A SYNC 9WLCSP RoHS : Compliant |
| 80,000 | |
LM4861MX![]() | Texas Instruments | Audio Amp Speaker 1-CH Mono 1.1W Class-AB 8-Pin SOIC T/R / IC AMP AUDIO PWR 1.5W MONO 8SOIC RoHS : Not Compliant |
| 37,550 | ||
| IRFP4868PBF | Infineon Technologies AG | Trans MOSFET N-CH 300V 70A 3-Pin(3+Tab) TO-247AC Tube / MOSFET N-CH 300V 70A TO-247AC RoHS : Compliant |
| 21,790 | ||
TDA4863-2G![]() | Infineon Technologies AG | Power Factor Controller IC for High Power Factor and Low THD RoHS : Compliant |
| 20,000 | ||
| FAN48610UC50X | Fairchild Semiconductor Corporation | IC REG BOOST 5V 1A SYNC 9WLCSP RoHS : Compliant |
| 17,755 | ||
MAX3486ECSA+T![]() | Maxim Integrated Products | IC TXRX RS485/422 2.5MBPS 8SOIC RoHS : Compliant |
| 10,000 | ||
LM4865MX![]() | Texas Instruments | LM4865 750 mW Audio Power Amplifier with DC Volume Control and Headphone Switch RoHS : Not Compliant |
| 6,760 | ||
LM4865M/NOPB![]() | Texas Instruments | IC AMP CLASS AB MONO 1W 8SOIC RoHS : Compliant |
| 6,550 | ||
MAX3486ESA-T![]() | Maxim Integrated Products | RoHS : Not Compliant |
| 5,000 | ||
LM4865MMX![]() | Texas Instruments | IC AMP AUDIO PWR 1W MONO 8VSSOP RoHS : Not Compliant |
| 3,460 | ||
MAX3486ESA![]() | Maxim Integrated Products | 3.3V-Powered, 10Mbps and Slew-Rate-Limited True RS-485/RS-422 Transceivers | IC TXRX RS485/422 2.5MBPS 8SOIC RoHS : Not Compliant |
| 3,016 | ||
| BCM84868A0KFSBG | Broadcom Limited | QUAD-PORT 28NM MG/10GBASE-T PHY |
| 2,760 | ||
LM4862MX/NOPB![]() | Texas Instruments | IC AMP AUDIO PWR .825W AB 8SOIC RoHS : Compliant |
| 1,750 | ||
| STM32L486RGT7 | STMicroelectronics | IC MCU 32BIT 1MB FLASH 64LQFP / ARM® Cortex®-M4 series Microcontroller IC 32-Bit Single-Core 80MHz 1MB (1M x 8) FLASH 64-LQFP (10x10) RoHS : Compliant |
| 1,000 | ||
| WJLXT972MLC.A4-864115 | Inphi Corporation | IC TXRX ETHERNET 100MBPS 48-LQFP RoHS : Compliant |
| 36 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |