 |
Datenblatt-Suchmaschine für elektronische Bauteile |
|
|
Datenblatt-Suchmaschine für elektronische Bauteile |
|
5185-R20-R Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
 STMicroelectronics | ST75185CTR | STMicroelectronics | Multiple RS-232 drivers and receivers RoHS : Compliant |
| 4,808 | |
 Coilcraft Direct | LPS5015-185MRC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS, lead-free, halogen-free RoHS : Compliant |
| 1,560 | |
| LPS6235-185MRC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS, lead-free, halogen-free RoHS : Compliant |
| 1,005 | ||
| LPS6225-185MRC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS, lead-free, halogen-free RoHS : Compliant |
| 499 | ||
 Ameya Holding Limited | TLV755185PDQNR | Texas Instruments | RoHS : Compliant | 1,056,900 | ||
| TLV755185PDQNRM3 | Texas Instruments | RoHS : Compliant | 317,500 | |||
SN75185DBR | Texas Instruments | Hong Kong RoHS : Compliant | 150,997 | |||
 ComSIT USA | BUK951855 | Philips E C G Inc | TRENCHMOS TRANSISTOR LOGIC LEVEL FET Power Field-Effect Transistor, 57A I(D), 55V, 0.018ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Not Compliant | 242 | ||
| SN75185DW | Texas Instruments | Line Transceiver, 3 Func, 3 Driver, 5 Rcvr, BIPolar, PDSO20 RoHS : Not Compliant | 49 | |||
 Richardson RFPD | 5185 | Spectrum Control | ADAPTERS, IN-SERIES TYPE N, ECONOMY, DC - 6 GHZ RoHS : Compliant | 0 | ||
| 85185036 | HUBER+SUHNER | SENCITY Tram MULTI Antenna RoHS : Compliant |
| 0 | ||
| 85185117 | HUBER+SUHNER | Microwave Test Assemblies, 2.92mm (male), 2.92mm ( RoHS : Compliant |
| 0 | ||
| 85185324 | HUBER+SUHNER | SENCITY OMNI-M RoHS : Compliant |
| 0 | ||
| 85185568 | HUBER+SUHNER | SENCITY SC OMNI-M Antenna RoHS : Compliant |
| 0 | ||
| 85185336 | HUBER+SUHNER | 1399.17.0328 RoHS : Compliant |
| 0 | ||
| 85185381 | HUBER+SUHNER | SENCITY Tram MULTI Antenna RoHS : Compliant |
| 0 | ||
| 85185417 | HUBER+SUHNER | SENCITY Tram MULTI Antenna RoHS : Compliant |
| 0 | ||
| 85185301 | HUBER+SUHNER | SENCITY OMNI-M RoHS : Compliant |
| 0 | ||
| 85185338 | HUBER+SUHNER | 1399.99.0328 RoHS : Compliant |
| 0 | ||
| 85185383 | HUBER+SUHNER | SENCITY Tram MULTI Antenna RoHS : Compliant |
| 0 | ||
| 85185419 | HUBER+SUHNER | SENCITY Tram MULTI Antenna RoHS : Compliant |
| 0 | ||
| 85185334 | HUBER+SUHNER | 1399.99.0327 RoHS : Compliant |
| 0 | ||
| 85185525 | HUBER+SUHNER | SENCITY Tram MULTI Antenna RoHS : Compliant |
| 0 | ||
| 85185570 | HUBER+SUHNER | SENCITY SC OMNI-M Antenna RoHS : Compliant |
| 0 | ||
 Chip 1 Exchange | TC518512AFI-10 | Toshiba America Electronic Components | INSTOCK | 13,000 | ||
| 2222-368-45185 | Philips Semiconductors | INSTOCK | 3,000 | |||
| Q67107H5185A805 | INSTOCK | 1,700 | ||||
| TLV755185PDQNR | Texas Instruments | INSTOCK RoHS : Compliant | 1,016 | |||
| 222236845185 | INSTOCK | 500 | ||||
| 65185-001LF | INSTOCK | 448 | ||||
| 851854 | INSTOCK | 71 | ||||
| 1D50518-501 | INSTOCK | 59 | ||||
| PE-65185 | INSTOCK | 24 | ||||
| MHW5185 | Motorola Semiconductor Products | INSTOCK | 21 | |||
| RL-1518-5-390 | INSTOCK | 1 | ||||
 Avnet Asia | 8020.5185.PT | Schurter Electronic Components | (Alt: 8020.5185.PT) RoHS : Compliant | 0 | ||
| W5185 | Pulse Electronics Corporation | Shelving Unit, 16 Bins, 25.5 " x 25 "" x 10 """ (Alt: W5185) RoHS : Compliant | 0 | |||
| BK-C518-5-R | Eaton Corporation | (Alt: BK-C518-5-R) RoHS : Compliant | 0 | |||
| 2325185-9 | TE Connectivity | RCPT CAGE ASSY W/ L-HS &2LP 1X2 QSFP-DD (Alt: 2325185-9) RoHS : Compliant | 0 | |||
| 0423751856 | Molex | (Alt: 0423751856) RoHS : Compliant | 0 | |||
| 2325185-8 | TE Connectivity | RCPT CAGE ASSY W/ L-HS &2LP 1X2 QSFP-DD (Alt: 2325185-8) RoHS : Compliant | 0 | |||
 Avnet Silica | ST75185CTR | STMicroelectronics | RS232 Transceiver 3 Drivers 5 Receivers 75V to 15V Supply TSSOP20 (Alt: ST75185CTR) RoHS : Compliant | 55,000 | ||
| AP7315-185SR-7 | Diodes Incorporated | (Alt: AP7315-185SR-7) RoHS : Compliant | 0 | |||
| AP7315-185W5-7 | Diodes Incorporated | (Alt: AP7315-185W5-7) RoHS : Compliant | 0 | |||
| C15185_STRADELLA-8-HB-W | LEDIL | LEDC15185STRADELLA8HBW (Alt: C15185_STRADELLA-8-HB-W) RoHS : Compliant | 0 | |||
 Chip-Germany GmbH | 3VA9233-0JA12 (25-185MM² | Siemens | 22 | |||
 Component Electronics, Inc | 5151853TFT4 | Electro Cables Inc | IN STOCK SHIP TODAY | 159 | ||
| C518-5A | Littelfuse Inc | IN STOCK SHIP TODAY |
| 11 | ||
| BK/C518-5A | Littelfuse Inc | IN STOCK SHIP TODAY |
| 11 | ||
| 5745185-7 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 5 | ||
| 745185-7 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4 | ||
| 5745185-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
 DB Roberts | MS51859-5 | Military Specifications |
| 75 | ||
| 5185 | Avdel | M8UPX30SS 2.5C | 0 | |||
| 551851 | Essentra Components | Rubber Plug Black 1.268 - 1.394 in Hole | 0 | |||
| 551852 | Essentra Components | 0 | ||||
| E3-105-185 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 551850 | Essentra Components | Rubber Plug Black .992 - 1.126 in Hole | 0 | |||
| E3-1215-185 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| RRH-35-18-50 | Essentra Components | 0 | ||||
| E3-1215-1859 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-1015-1859 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
 EBV Elektronik | C15185_STRADELLA-8-HB-W | LEDIL | LEDC15185STRADELLA8HBW (Alt: C15185_STRADELLA-8-HB-W) RoHS : Compliant | 4,960 | ||
| SUCULDP1.VC-MBMH-67-V3V5-185-R18 | ams OSRAM Group | (Alt: Q65113A6918) RoHS : Compliant | 500 | |||
| ST75185CTR | STMicroelectronics | RS232 Transceiver 3 Drivers 5 Receivers 75V to 15V Supply TSSOP20 (Alt: ST75185CTR) RoHS : Compliant | 0 | |||
 Maritex | TPS65185RSLR | Texas Instruments | Power Management ICs (PMICs); TPS65185RSLR; TEXAS INSTRUMENTS; 48; 6 mm; 0 m; VQFN RoHS : Compliant |
| 23 | |
 Pasternack Enterprises US | PE3C8518-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-375-LLPL, RF Cable Type: SPP-375-LLPL, RF Cable Impedance: 50 Ohm, Length: 7 inches. Plenum 7/16 DIN Male to 7/16 DIN Male Cable Using SPP-375-LLPL Coax Using Times Microwave Parts in 50 CM., Radio frequency assembly plenum 7/16 DIN male to 7/16 DIN male cable using SPP-375-LLPL coax using Times Microwave parts in 50 CM from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to 7/16 DIN male cable using SPP-375-LLPL coax using Times Microwave parts in 50 CM, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3C8518-50CM, can also be known as a low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C8518-50CM is built with SPP-375-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to 7/16 DIN male cable using SPP-375-LLPL coax using Times Microwave parts in 50 CM. |
| 36 | |
| PE3W15185 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to N Female 4 Hole Flange Cable Using PE-SR402FL Coax., Radio frequency assembly BNC female bulkhead to N female 4 hole flange cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to N female 4 hole flange cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a type N 4 hole flange cable connection on the other. Our BNC to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W15185 can also be known as a BNC jack to type N jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. BNC jack to type N jack cable assembly PE3W15185 is built with PE-SR402FL which is a formable coax type. The Pasternack formable BNC cable assembly is manufactured with BNC to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15185 can also be used in the other direction and will be a type N female 4 hole flange to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to type N jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N RF cable assembly as per your requirements. | 0 | |||
| PE3W15185-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Female Bulkhead to N Female 4 Hole Flange Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly BNC female bulkhead to N female 4 hole flange cable 12 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to N female 4 hole flange cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a type N 4 hole flange cable connection on the other. Our BNC to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W15185-12 can also be known as a BNC jack to type N jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. BNC jack to type N jack cable assembly PE3W15185-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable BNC cable assembly is manufactured with BNC to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15185-12 can also be used in the other direction and will be a type N female 4 hole flange to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to type N jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W15185-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. BNC Female Bulkhead to N Female 4 Hole Flange Cable 9 Inch Length Using PE-SR402FL Coax., Radio frequency assembly BNC female bulkhead to N female 4 hole flange cable 9 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to N female 4 hole flange cable 9 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a type N 4 hole flange cable connection on the other. Our BNC to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W15185-9 can also be known as a BNC jack to type N jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. BNC jack to type N jack cable assembly PE3W15185-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable BNC cable assembly is manufactured with BNC to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15185-9 can also be used in the other direction and will be a type N female 4 hole flange to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to type N jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W05185 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. FME Jack to SMA Male Right Angle Cable Using LMR-195-FR Coax. PE3W05185 is a FME jack to SMA male right angle cable using LMR-195-FR coax. This Pasternack FME jack to SMA male right angle cable assembly uses a 50 Ohm FME for connector 1 and a 50 Ohm SMA for connector 2. FME to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack FME to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05185 FME jack to SMA male right angle cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W15185-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. BNC Female Bulkhead to N Female 4 Hole Flange Cable 6 Inch Length Using PE-SR402FL Coax., Radio frequency assembly BNC female bulkhead to N female 4 hole flange cable 6 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to N female 4 hole flange cable 6 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a type N 4 hole flange cable connection on the other. Our BNC to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W15185-6 can also be known as a BNC jack to type N jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. BNC jack to type N jack cable assembly PE3W15185-6 is built with PE-SR402FL which is a formable coax type. The Pasternack formable BNC cable assembly is manufactured with BNC to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15185-6 can also be used in the other direction and will be a type N female 4 hole flange to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to type N jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C5185 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. N Male to SSMC Jack Cable Using RG316-DS Coax., Radio frequency assembly N male to SSMC jack cable using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to SSMC jack cable using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and SSMC cable connection on the other. Our N type to SSMC cable assemblies have a male gender on end 1 and jack on end 2. This N type to SSMC cable is a male to jack coax assembly, PE3C5185, can also be known as a type N plug to SSMC female cable assembly and will be shipped same-day as it is purchased. Type N plug to SSMC female cable assembly PE3C5185 is built with RG316-DS which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to SSMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency type N male to SSMC jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5185 can also be used in the other direction and will be SSMC jack to type N male cable assembly if the opposite connectivity is required. N type plug to SSMC female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SSMC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SSMC jack cable using RG316-DS coax. | 0 | |||
| PE3W15185-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Female Bulkhead to N Female 4 Hole Flange Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly BNC female bulkhead to N female 4 hole flange cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to N female 4 hole flange cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a type N 4 hole flange cable connection on the other. Our BNC to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W15185-24 can also be known as a BNC jack to type N jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. BNC jack to type N jack cable assembly PE3W15185-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable BNC cable assembly is manufactured with BNC to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15185-24 can also be used in the other direction and will be a type N female 4 hole flange to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to type N jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W15185-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. BNC Female Bulkhead to N Female 4 Hole Flange Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly BNC female bulkhead to N female 4 hole flange cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to N female 4 hole flange cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a type N 4 hole flange cable connection on the other. Our BNC to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W15185-18 can also be known as a BNC jack to type N jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. BNC jack to type N jack cable assembly PE3W15185-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable BNC cable assembly is manufactured with BNC to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15185-18 can also be used in the other direction and will be a type N female 4 hole flange to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to type N jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE45185 | Pasternack Enterprises | Key Specifications, Polarity: Reverse Polarity, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Crimp/Solder, Mount Method: None, Interface Type 1: RG188-DS, Interface Type 2: RG316-DS. Reverse Polarity SMA Male Right Angle Connector Crimp/Solder Attachment for RG188-DS, RG316-DS. PE45185 reverse polarity SMA male right angle coaxial connector has an interface type of RG188-DS, RG316-DS and a 50 Ohm impedance. Pasternack reverse polarity SMA male connector uses shield/contact crimp/solder as an attachment method. The Pasternack reverse polarity right angle SMA male coaxial connector has a PTFE dielectric type. The Pasternack SMA coaxial connector has a brass body with nickel plating. This reverse polarity SMA male right angle coaxial RF connector is REACH compliant. This Pasternack reverse polarity right angle male SMA connector will ship the same day as purchased. Our SMA reverse polarity right angle male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMA connector cable assemblies that will ship the same day as well. |
| 0 | ||
| PE3W25185 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to Slide-On BMA Jack 2 Hole Flange Cable Using RG402 Coax. PE3W25185 is a SMA female bulkhead to BMA jack 2 hole flange cable using RG402 coax. This Pasternack SMA female bulkhead to BMA jack 2 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BMA for connector 2. Our female SMA bulkhead to jack BMA 2 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W25185 SMA female bulkhead to BMA jack 2 hole flange cable assembly is constructed with RG402 coax. | 0 | |||
| PE3FCA518-5M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Connector 1 Series: FC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex FC APC, NK to SC APC, SM OS2, 2.0mm Plenum, Yellow-5M. Pasternack’s PE3FCA518-5M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long duplex cable assembly is equipped with FC/APC narrow key to SC/APC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, fiber optic test and measurement, medical and biomedical, military and defense, industrial automation and sensing and scientific research and high-precision optical systems. With the flexibility of custom lengths, the PE3FCA518-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA518-5M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual FC/APC to dual SC/APC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W05185LF/HS | Pasternack Enterprises | 0 | ||||
 TE Connectivity | 5745185-1 | TE Connectivity | 15 RCPT SP/MS STD Number of Positions: 15 Connector & Housing Type: Receptacle Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 2 D-Shaped Connector | 15 Receptacle Board-to-Board Board Mount | Part Number: 5745185-1 | Internal Number: 5745185-1 | 2 | TE Connectivity RoHS : Compliant |
| 2,076 | |
| 35185 | TE Connectivity | TERMINAL,SOLIS R 2 1/2 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 2 AWG Wire Size: 26.7 – 42.4 mm² Wire Size: 52600 – 83700 CMA Stud Size: 1/2 M12 Closed Ring Tongue Terminal 2 AWG 26.7 – 42.4 mm² 52600 – 83700 CMA | Ring Terminal | Part Number: 35185 | Internal Number: 35185 | Alias Number: A93977-000 | TE Connectivity RoHS : Compliant |
| 1,785 | ||
| 5745185-7 | TE Connectivity | 15 RCPT SP/MS STD Number of Positions: 15 Connector & Housing Type: Receptacle Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 2 D-Shaped Connector | 15 Receptacle Board-to-Board Board Mount | Part Number: 5745185-7 | Internal Number: 5745185-7 | 2 | TE Connectivity RoHS : Compliant |
| 1,374 | ||
 Vyrian | MAX5185BEEI | Maxim Integrated Products | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.025us Settling Time, PDSO28 RoHS : Not Compliant | 11,595 | ||
| AP7315-185SA-7 | Diodes Incorporated | Fixed Positive LDO Regulator, 1.85V, 0.44V Dropout, CMOS, PDSO3 | 11,196 | |||
| TLV755185PDQNR | Texas Instruments | Fixed Positive LDO Regulator, 1.8V, 0.4V Dropout, PBCC4 RoHS : Compliant | 9,356 | |||
ST75185CPR | STMicroelectronics | Line Transceiver, 3 Func, 3 Driver, 5 Rcvr, BIPolar, PDSO20 RoHS : Compliant | 9,105 | |||
| TAS5518-5261K2EVM | Texas Instruments | 8,677 | ||||
| AP7315-185SR7 | Diodes Incorporated | Fixed Positive LDO Regulator, 1.85V, 0.44V Dropout, CMOS, PDSO3 | 8,244 | |||
| 1051852-1 | TE Connectivity | RF SMA Connector, 1 Contact(s), Female, Cable Mount, Solder Terminal, Locking, Jack RoHS : Compliant | 8,031 | |||
TLV705185YFPT | Texas Instruments | Fixed Positive LDO Regulator, 1.85V, 0.25V Dropout, CMOS RoHS : Compliant | 7,624 | |||
| 1051855-1 | TE Connectivity | RF SMA Connector, 1 Contact(s), Female, Cable Mount, Crimp Terminal, Locking, Jack RoHS : Compliant | 6,986 | |||
| 1415185 | Phoenix Contact | Cables/Accessories RoHS : Compliant | 5,766 | |||
| TAS5518-5152K8EVM | Texas Instruments | 5,704 | ||||
| BQ25185EVM | Texas Instruments | 4,997 | ||||
| BUK9518-55A | Nexperia | Power Field-Effect Transistor, 61A I(D), 55V, 0.019ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Compliant | 4,649 | |||
| CT518503 | Micron Technology, Inc | 4,617 | ||||
| CT518511 | Micron Technology, Inc | 3,371 | ||||
 Win Source Electronics | TPS65185RGZT | Texas Instruments | IC PWR MGMT E INK 48VQFN RoHS : Compliant |
| 55,000 | |
| TPS65185RGZR | Texas Instruments | IC PWR MGMT E INK 48VQFN RoHS : Compliant |
| 54,190 | ||
| ST75185CTR | STMicroelectronics | IC DRVR/RCVR MULT RS-232 20TSSOP RoHS : Compliant |
| 15,000 | ||
| TPS651851RSL | Texas Instruments | EPD Power Management IC 48-VQFN |
| 10,006 | ||
| TPS651851RSLR | Texas Instruments | IC PWR MGMT E INK 48VQFN / PMIC for E Ink Vizplex Enabled Electronic Paper Display RoHS : Compliant |
| 9,370 | ||
| TPS651851RSLT | Texas Instruments | IC PWR MGMT E INK 48VQFN / E Ink®, Vizplex™ Display, OMAP™ PMIC 48-VQFN (6x6) RoHS : Compliant |
| 9,270 | ||
HC55185ECMZ | Intersil Corporation | VoIP Ringing SLIC Family RoHS : Compliant |
| 4,500 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
German ▼ 
English
Chinese
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand