5231-R2 Price, Verteiler, Stock

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 24 inches. Reverse Polarity TNC Male to BNC Male Cable 24 Inch Length Using RG142 Coax., Radio frequency assembly reverse polarity TNC male to BNC male cable 24 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity TNC male to BNC male cable 24 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC cable connection on one end and BNC cable connection on the other. Our reverse polarity TNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity TNC to BNC cable is a male to male coax assembly, PE35231-24, can also be known as a reverse polarity TNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC plug to BNC plug cable assembly PE35231-24 is built with RG142 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency reverse polarity TNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35231-24 can also be used in the other direction and will be BNC male to reverse polarity TNC male cable assembly if the opposite connectivity is required. TNC reverse polarity plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC male to BNC male cable 24 inch length using RG142 coax.

1 : $72.79
25 : $69.15
50 : $65.51
100 : $62.6

960

PE410-06575-231

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: TRB, Connector Gender: Plug, Impedance: 78 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 500 MHz, Interface Type 1: 30-02003, Interface Type 2: TWC-78-1. 78 Ohm TRB Plug 1553 Connector Crimp/Solder Attachment for 30-02003, TWC-78-1,. PE410-06575-231 TRB plug coaxial connector has an interface type of TRB plug 30-02003, TWC-78-1 and a 78 Ohm impedance.Pasternack TRB plug connector uses shield/contact crimp/solder as an attachment method. Our plug TRB coaxial connector provides a minimum frequency of DC and a maximum frequency of 500 MHz. The Pasternack TRB coaxial connector has a brass body with nickel plating. This TRB plug coaxial RF connector is REACH compliant. Our high quality PE410-06575-231 features a ASTM-B-733 body plating specification. We also build TRB custom connector cable assemblies that will ship the same day as well. Our TRB plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. For further information on similar products, our expert technical support and trained sales team can get you to the perfect RF connector as per your requirement.

1 : $41.59
25 : $39.51
50 : $37.43
100 : $35.77

PE33523-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to BNC Male Cable 12 Inch Length Using RG196 Coax., Radio frequency assembly SMA male to BNC male cable 12 inch length using RG196 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to BNC male cable 12 inch length using RG196 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE33523-12, can also be known as a SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE33523-12 is built with RG196 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33523-12 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male cable 12 inch length using RG196 coax.

1 : $73.89
25 : $70.2
50 : $66.5
100 : $63.55

PE3FCA523-10M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Connector 1 Series: FC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex FC UPC, NK to SC APC, SM OS2, 2.0mm Plenum, Yellow-10M. Pasternack’s PE3FCA523-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long duplex cable assembly is equipped with FC/UPC narrow key to SC/APC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, fiber optic test and measurement, medical and biomedical, military and defense, industrial automation and sensing and scientific research and high-precision optical systems. With the flexibility of custom lengths, the PE3FCA523-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA523-10M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual FC/UPC to dual SC/APC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $39.19
5 : $37.62
10 : $36.05
25 : $34.49

PE3FCA523-1M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Connector 1 Series: FC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex FC UPC, NK to SC APC, SM OS2, 2.0mm Plenum, Yellow-1M. Pasternack’s PE3FCA523-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long duplex cable assembly is equipped with FC/UPC narrow key to SC/APC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, fiber optic test and measurement, medical and biomedical, military and defense, industrial automation and sensing and scientific research and high-precision optical systems. With the flexibility of custom lengths, the PE3FCA523-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA523-1M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual FC/UPC to dual SC/APC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $35.39
5 : $33.97
10 : $32.56
25 : $31.14

PE3W05231LF/HS

Pasternack Enterprises

PE3523-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female to N Female Cable 12 Inch Length Using RG214 Coax., Radio frequency assembly N female to N female cable 12 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female to N female cable 12 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our type N to type N cable assembly has female gender on end 1 and female on end 2. PE3523-12 can also be known as a type N jack to type N jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE (LD) dielectric type. N type jack to N type jack cable assembly PE3523-12 is built with RG214 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3523-12 RF cable are available on our downloadable PDF datasheet. N type jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal N RF cable assembly as per your requirements.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE3523-108

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 108 inches. N Female to N Female Cable 108 Inch Length Using RG214 Coax., Radio frequency assembly N female to N female cable 108 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female to N female cable 108 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our type N to type N cable assembly has female gender on end 1 and female on end 2. PE3523-108 can also be known as a type N jack to type N jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE (LD) dielectric type. N type jack to type N jack cable assembly PE3523-108 is built with RG214 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3523-108 RF cable are available on our downloadable PDF datasheet. Type N jack to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal N RF cable assembly as per your requirements.

1 : $239.99
25 : $227.99
50 : $215.99
100 : $206.39

PE36523-18

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 18 inches. 1.85mm Male to 1.85mm Male Cable 18 Inch Length Using RG405 Coax., Radio frequency assembly 1.85mm male to 1.85mm male cable 18 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 18 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE36523-18, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE36523-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 18 inch length using RG405 coax.

1 : $335.99
25 : $319.19
50 : $302.39

PE3W05523-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SSMA Male Right Angle to SMA Male Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly SSMA male right angle to SMA male cable 12 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA male right angle to SMA male cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SSMA cable connection on one end and SMA cable connection on the other. Our right angle SSMA to SMA cable assembly has male gender on end 1 and male on end 2. PE3W05523-12 can also be known as a right angle SSMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE dielectric type. SSMA plug to SMA plug cable assembly PE3W05523-12 is built with RG174 which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with right angle SSMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W05523-12 RF cable are available on our downloadable PDF datasheet.PE3W05523-12 can also be used in the other direction and will be SMA male to right angle SSMA male cable assembly if the opposite connectivity is required. SSMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMA to SMA cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA RF cable assembly as per your requirements.

1 : $100.99
25 : $95.94
50 : $90.89
100 : $86.85

PE3W15231

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. White FAKRA Jack to FAKRA Jack Right Angle Cable Using LMR-100 Coax. PE3W15231 is a FAKRA jack to FAKRA jack right angle cable using LMR-100A coax. This Pasternack FAKRA jack to FAKRA jack right angle cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. FAKRA to FAKRA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack FAKRA to jack FAKRA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15231 FAKRA jack to FAKRA jack right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W05231/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SMA Male Cable Using LMR-195-FR Coax with HeatShrink., Radio frequency assembly TNC female bulkhead to SMA male cable using LMR-195-FR coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC female bulkhead to SMA male cable using LMR-195-FR coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and SMA cable connection on the other. Our TNC to SMA cable assemblies have a female gender on end 1 and male on end 2. This TNC to SMA cable is a female to male coax assembly, PE3W05231/HS, can also be known as a TNC jack to SMA plug cable assembly and will be shipped same-day as it is purchased. TNC jack to SMA plug cable assembly PE3W05231/HS is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency TNC female bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05231/HS can also be used in the other direction and will be SMA male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to SMA male cable using LMR-195-FR coax with heatshrink.

PE36523-12

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 12 inches. 1.85mm Male to 1.85mm Male Cable 12 Inch Length Using RG405 Coax., Radio frequency assembly 1.85mm male to 1.85mm male cable 12 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 12 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE36523-12, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE36523-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 12 inch length using RG405 coax.

1 : $335.99
25 : $319.19
50 : $302.39

PE3W25231

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to MCX Plug Cable Using RG58 Coax. PE3W25231 is a SMA female bulkhead to MCX plug cable using RG58 coax. This Pasternack SMA female bulkhead to MCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. Our female SMA bulkhead to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25231 SMA female bulkhead to MCX plug cable assembly is constructed with RG58 coax.

PE3W05231

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SMA Male Cable Using LMR-195-FR Coax., Radio frequency assembly TNC female bulkhead to SMA male cable using LMR-195-FR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC female bulkhead to SMA male cable using LMR-195-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and SMA cable connection on the other. Our TNC to SMA cable assemblies have a female gender on end 1 and male on end 2. This TNC to SMA cable is a female to male coax assembly, PE3W05231, can also be known as a TNC jack to SMA plug cable assembly and will be shipped same-day as it is purchased. TNC jack to SMA plug cable assembly PE3W05231 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency TNC female bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05231 can also be used in the other direction and will be SMA male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to SMA male cable using LMR-195-FR coax.

TE Connectivity

280523-1

TE Connectivity

12P MODU II SHRD HDR, RT ANG, TIN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 12 PCB Mount Header Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 280523-1 | Internal Number: 280523-1 | TE Connectivity
RoHS : Compliant

1,000 : $1.75
500 : $1.8
250 : $1.86
100 : $1.91
50 : $1.96
25 : $2.02
10 : $2.07
1 : $2.12

1,717

SM5231-BCE-S-010.00-431

TE Connectivity

10kPa Gage Sensor Pressure Sensor Type: Analog Pressure Sensor Modules Digital Pressure and Altimeter Sensor Modules Pressure Type: Gauge Proof Pressure Range: 15 psi Pressure: 1.45 psi Output Signal Details: 16 bit I2C Analog Pressure Sensor Modules Gauge 15 psi | Low Pressure Digital / Analog Sensor | Part Number: SM5231-BCE-S-010.00-431 | Internal Number: 5231-BCE-S-010-000 | TE Connectivity
RoHS : Compliant

1 : $23.44

367

368523-1

TE Connectivity

E-S MK-2(+) 3P PLUG ASS'Y Nominal Voltage Architecture: 12 V Number of Positions: 3 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Tab Width: 1.8 mm Econoseal & Connector Housing | 12 V 3 Housing for Female Terminals Wire-to-Wire | Part Number: 368523-1 | Internal Number: 368523-1 | 1.8 mm | TE Connectivity
RoHS : Compliant

1,000 : $0.58
500 : $0.72
250 : $1.1
100 : $1.44
50 : $1.73

361

776523-1

TE Connectivity

AS16,PLUG ASSY,ST,03P,E SEAL,CODE A Nominal Voltage Architecture: 12 V 240 V 48 V 24 V Number of Positions: 3 Connector & Housing Type: Plug Connector System: Wire-to-Wire Mating Pin Diameter: 1.5 mm Ampseal 16 Connector Plugs - Housing For Female Terminal | 12 V 3 | Part Number: 776523-1 | Internal Number: 776523-1 | Alias Number: AS16-ST-06-03SA-E | 1.5 mm | TE Connectivity
RoHS : Compliant

1 : $2.6

337

350523-1

TE Connectivity

15P STR/REL HSG HNGD V0 Connector Cover Type: Strain Relief Cover Primary Product Color: Black Primary Product Material: Nylon Number of Positions: 15 Operating Temperature (Max): 85 °C Strain Relief Cover Black | Connector Cap & Cover | Part Number: 350523-1 | Internal Number: 350523-1 | Nylon | TE Connectivity
RoHS : Compliant

500 : $14.41
250 : $14.91
100 : $15.41
50 : $15.9
25 : $16.4
10 : $16.9
1 : $17.4

198

5-102523-1

TE Connectivity

04 MODII HDR SRRA SHRD .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 4 PCB Mount Header Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 5-102523-1 | Internal Number: 5-102523-1 | TE Connectivity
RoHS : Compliant

10,000 : $2.03
5,000 : $2.08
2,500 : $2.12
1,000 : $2.17
500 : $2.21
250 : $2.26
100 : $2.3
50 : $2.35
25 : $2.39
10 : $2.44
1 : $2.48

Venkel Ltd.

TFCR0402-16W-E-5231BT

VENKEL LTD

Thin Film CR;0402;1/16W;�25PPM;5.23K;�0.1%
RoHS : Compliant

10,000

HPTF0805-TE-5231CT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�25PPM;5.23K;�0.25%
RoHS : Compliant

HPTF1210-UN-5231FT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�10PPM;5.23K;�1%
RoHS : Compliant

MELFM0204-TE-5231CT

VENKEL LTD

MELF Molded Thin Film CR;0204;1/4W;�25PPM;5.23K;�0.25%
RoHS : Not Compliant

HPTF1206-TP-5231AT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�5PPM;5.23K;�0.05%
RoHS : Compliant

HPTF2010-UP-5231DT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�5PPM;5.23K;�0.5%
RoHS : Compliant

MELFC0207-VC-5231FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�50PPM;5.23K;�1%
RoHS : Compliant

MELFC0207-VE-5231BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�25PPM;5.23K;�0.1%
RoHS : Compliant

MELFC0207-VZ-5231CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�15PPM;5.23K;�0.25%
RoHS : Compliant

MELFM0207-VE-5231FT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�25PPM;5.23K;�1%
RoHS : Not Compliant

PWCR0805-VK-5231FT

VENKEL LTD

Pulse Withstanding CR;0805;1/2W;�100PPM;5.23K;�1%
RoHS : Compliant

PWCR2010-XK-5231FT

VENKEL LTD

Pulse Withstanding CR;2010;1W;�100PPM;5.23K;�1%
RoHS : Compliant

CR0805-10W-5231DT

VENKEL LTD

Chip Resistor;0805;1/10W;5.23K;�0.5%
RoHS : Compliant

TFCR0402-16W-C-5231FT

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;5.23K;�1%
RoHS : Compliant

TFCR0603-16W-E-5231CT

VENKEL LTD

Thin Film CR;0603;1/16W;�25PPM;5.23K;�0.25%
RoHS : Compliant

Vyrian

ADA4523-1BCPZ-RL7

Analog Devices Inc

Operational Amplifier, 1 Func, 5uV Offset-Max, PDSO8
RoHS : Compliant

11,501

MMBZ5231B-7

Diodes Incorporated

Zener Diode, 5.1V V(Z), 5%, 0.35W, Silicon, Unidirectional

10,528

MAX25231ATCB-V+T

Analog Devices (Maxim Integrated)

9,713

HCPL-5231#300

Broadcom Limited

Logic IC Output Optocoupler, 2-Channel, 2-Element, 1500V Isolation
RoHS : Not Compliant

9,654

MAX25231ATCA-V

Analog Devices (Maxim Integrated)

9,521

BCM5231A4KPT

Broadcom Limited

8,950

5962-01-425-2310

Texas Instruments

Shift Register
RoHS : Not Compliant

7,918

M5231-000005-050PG

TE Connectivity

Strain Guage Sensor, 0Psi Min, 50Psi Max, 0.25%, 0.5-4.5V, Cylindrical
RoHS : Compliant

7,148

523199-3

TE Connectivity

TOOLS AND MACHINERY

6,378

AD9523-1BCPZ-REEL7

Analog Devices Inc

Processor Specific Clock Generator, 1000MHz, CMOS
RoHS : Compliant

5,635

BCM52311A1HH0H274S

Broadcom Limited

RoHS : Compliant

4,669

LM95231BIMMX-2/NOPB

Texas Instruments

Serial Switch/Digital Sensor, 11 Bit(s), 3Cel, Square, 8 Pin, Surface Mount
RoHS : Compliant

3,398

R5F52318AGFM#50

Renesas Electronics Corporation

Microcontroller
RoHS : Compliant

837

MAX5231BEEE-T

Maxim Integrated Products

D/A Converter, 1 Func, Serial Input Loading, 10us Settling Time, PDSO16
RoHS : Not Compliant

724

5962-1523101VXC

Microchip Technology Inc

Buffer/Inverter Based Peripheral Driver
RoHS : Compliant

448

Win Source Electronics

LP55231SQE/NOPB

Texas Instruments

LP55231 Programmable 9-Output LED Driver
RoHS : Compliant

154 : $1.9514
115 : $2.1766
89 : $2.2517
65 : $2.3267
42 : $2.4018
18 : $2.9271

332,446

MMBZ5231BLT3G

onsemi

DIODE ZENER 5.1V 225MW SOT23-3
RoHS : Compliant

23,080 : $0.013
18,520 : $0.0135
14,290 : $0.014
9,935 : $0.0151
6,415 : $0.0156
2,995 : $0.0167

276,610

SZMMSZ5231BT1G

onsemi

DIODE ZENER 500MW 5.1V SOD123
RoHS : Compliant

6,090 : $0.0552
4,550 : $0.0616
3,515 : $0.0637
2,555 : $0.0659
1,650 : $0.068
680 : $0.0828

270,000

MMSZ5231BT1

onsemi

Zener Voltage Regulators | DIODE ZENER 5.1V 500MW SOD123
RoHS : Not Compliant

13,395 : $0.0224
10,730 : $0.0233
8,265 : $0.0242
5,770 : $0.026
3,705 : $0.027
1,740 : $0.0288

267,755

MMSZ5231BT1G

onsemi

DIODE ZENER 5.1V 500MW SOD123
RoHS : Compliant

13,395 : $0.0224
10,730 : $0.0233
8,265 : $0.0242
5,770 : $0.026
3,705 : $0.027
1,740 : $0.0288

195,150

MMSZ5231B

Fairchild Semiconductor Corporation

DIODE ZENER 5.1V 500MW SOD123
RoHS : Compliant

22,390 : $0.0134
16,780 : $0.0149
12,905 : $0.0155
9,375 : $0.016
6,065 : $0.0165
2,490 : $0.0201

180,000

MMBZ5231B-7-F

Diodes Incorporated

DIODE ZENER 5.1V 350MW SOT23-3
RoHS : Compliant

15,960 : $0.0188
12,760 : $0.0196
9,805 : $0.0204
6,850 : $0.0219
4,425 : $0.0226
2,070 : $0.0242

123,000

MMBZ5231B-7

Diodes Incorporated

DIODE ZENER 5.1V 350MW SOT23-3
RoHS : Not Compliant

5,030 : $0.0597
4,030 : $0.0621
3,105 : $0.0645
2,165 : $0.0694
1,395 : $0.0718
655 : $0.0767

81,000

BTS5231-2GS

Infineon Technologies AG

Smart High-Side Power Switch PROFET Two Channels, 140 m Ω
RoHS : Compliant

131 : $2.5694
98 : $2.8659
76 : $2.9646
55 : $3.0635
36 : $3.1623
15 : $3.8541

47,500

TZM5231B-GS18

Vishay Huntington

DIODE ZENER 5.1V 500MW SOD80

1,525 : $0.197
1,140 : $0.2197
880 : $0.2273
640 : $0.2349
415 : $0.2425
170 : $0.2955

34,100

LMBZ5231BLT1G

LRC Leshan Radio Co Ltd

RoHS : Compliant

11,860 : $0.0253
8,870 : $0.0282
6,875 : $0.0291
4,985 : $0.0301
3,220 : $0.0311
1,320 : $0.0379

30,000

R5F52318ADFP#10

Renesas Electronics Corporation

IC MCU 32BIT 512KB FLSH 100LFQFP / RXv2 RX200 Microcontroller IC 32-Bit Single-Core 54MHz 512KB (512K x 8) FLASH 100-LFQFP (14x14)
RoHS : Compliant

25 : $12.1822
19 : $13.5879
15 : $14.0564
11 : $14.525
7 : $14.9935
3 : $18.2733

21,600

1N5231B

Fairchild Semiconductor Corporation

DIODE ZENER 5.1V 500MW DO35
RoHS : Compliant

12,935 : $0.0232
9,690 : $0.0258
7,495 : $0.0267
5,435 : $0.0276
3,510 : $0.0285
1,445 : $0.0347

20,000

AD5231BRUZ10-REEL7

Analog Devices Inc

IC POT DGTL 1024POS 16TSSOP
RoHS : Compliant

39 : $7.8517
29 : $8.7577
23 : $9.0597
17 : $9.3617
11 : $9.6636
5 : $11.7775

11,200

AD9523-1BCPZ-REEL7

Analog Devices Inc

IC INTEGER-N CLCK GEN 72LFCSP
RoHS : Compliant

13 : $23.6364
10 : $26.3637
8 : $27.2728
6 : $28.1819
4 : $29.091
2 : $35.4546

650

5231-R2 Verteiler

Link URL