| Datenblatt-Suchmaschine für elektronische Bauteile |
|
561-R8 Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
![]() PEI Genesis | TVPS00RF-25-61JN-LC | Amphenol Corporation |
| 354 | ||
| 93-573956-11P | Amphenol Corporation |
| 48 | |||
| CTVP00RW-25-61A | Amphenol Corporation |
| 18 | |||
| 5617635-610 | SOURIAU-SUNBANK |
| 0 | |||
| 5617635-61 | SOURIAU-SUNBANK |
| 0 | |||
| 656-1204-304F | Dialight | RoHS : Compliant |
| 0 | ||
| 995-0002-561 | ITT Interconnect Solutions |
| 0 | |||
| LJT06RT-25-61PA-023 | Amphenol Corporation |
| 0 | |||
| LJT07RE25-61PB-023 | Amphenol Corporation |
| 0 | |||
| LJT07RT-25-61P-014 | Amphenol Corporation |
| 0 | |||
| 057-8656-100 | ITT Interconnect Solutions |
| 0 | |||
| 031-8556-145 | ITT Interconnect Solutions |
| 0 | |||
| CTVS07RF-25-61B | Amphenol Corporation |
| 0 | |||
| 656-1205-304F | Dialight | RoHS : Compliant |
| 0 | ||
| 556-1305-304 | Dialight | RoHS : Not Compliant |
| 0 | ||
![]() Richardson RFPD | 7105-1561-011 | Radiall | Conn SSMC PL 0Hz to 12.4GHz 50Ohm Solder RA Cable RoHS : Not Compliant |
| 1 | |
AD5611AKSZ-REEL7![]() | Analog Devices Inc | DAC 1-CH Resistor-String 10-bit 6-Pin SC-70 T/R RoHS : Compliant |
| 0 | ||
| ADF5610XCCZ | Analog Devices Inc | ADF5610XCCZ RoHS : Compliant | 0 | |||
| LFXTAL056140REEL | IQD Frequency Products | Crystal 24MHz ±50ppm (Tol) ±100ppm (Stability) 8pF RoHS : Compliant |
| 0 | ||
| 125619 | Wakefield-Vette | EXTRUDED HEAT SINK RoHS : Compliant |
| 0 | ||
| 02561036-000 | TE Connectivity | Premium performance 12mm diameter AC LVDT RoHS : Compliant |
| 0 | ||
| K763505610PM0D035 | Kendeil srl | ALUM ELECTROLYTC CAP RoHS : Compliant | 0 | |||
| DC0405612U2B-BT0 | Wakefield-Vette | FAN RoHS : Compliant |
| 0 | ||
| 5-619078-4 | TE Connectivity | Conn Coaxial PL 0Hz to 2.4GHz 50Ohm RA Cable Mount RoHS : Compliant | 0 | |||
| 5767056-1 | TE Connectivity | Conn High Speed Fine PitchConnector PL 1Power/38Si RoHS : Compliant | 0 | |||
| 7405-1561-010 | Radiall | Conn SSMB F 0Hz to 12.4GHz 50Ohm Solder RA Cable M RoHS : Not Compliant |
| 0 | ||
| 85175617 | HUBER+SUHNER | Cable Assembly Coaxial 0.355m SMPM to SMPM F-M NAN RoHS : Compliant | 0 | |||
| 570FBC000561DGR | Skyworks Solutions Inc | Oscillator XO 200MHz ±31.5ppm LVDS 55% 2.5V 8-Pin RoHS : Compliant |
| 0 | ||
| 800H561JMN5000X | Kyocera AVX Components | 800H561JMN5000X RoHS : Not Compliant | 0 | |||
| 02561021-000 | TE Connectivity | LVDT HCT 500 ASSY RoHS : Compliant |
| 0 | ||
![]() Chip-Germany GmbH | BCM56170B0KFSBG | Broadcom Limited | 10,000 | |||
TLV5619IDW![]() | Texas Instruments | RoHS : Compliant | 600 | |||
| FTA9A-14,7456/16-30-30 | Freqtech Ohg | 100 | ||||
| 4609X-561LF | Bourns Inc | 40 | ||||
![]() Component Electronics, Inc | GMC21X7R561K50NT![]() | Cal-Chip Electronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 13,450 | |
C1206C561J5GAC7800![]() | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 8,870 | ||
| 0603N561J500NTLF | Chipcera Technology Co Ltd | IN STOCK SHIP TODAY |
| 8,000 | ||
| SA101A561JAA | Kyocera AVX Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,250 | ||
| MCH215A561JP | ROHM Semiconductor | IN STOCK SHIP TODAY |
| 800 | ||
| 2322-156-16813 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 550 | ||
| 561-KSP92 | Eagle Plastic Devices | IN STOCK SHIP TODAY | 500 | |||
| 1561/42-RD005 | Alpha Wire | IN STOCK SHIP TODAY |
| 350 | ||
AM27C256-120DC![]() | AMD | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 163 | ||
| MM5610AN | National Semiconductor Corporation | IN STOCK SHIP TODAY | 20 | |||
27C256-12/P![]() | Microchip Technology Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 15 | |||
AT93C56-10PC![]() | Atmel Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 10 | |||
| 552561-3 | TE Connectivity | IN STOCK SHIP TODAY |
| 7 | ||
| MCP2561-E/P | Microchip Technology Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| CL-305-619 | Brady Worldwide Inc | IN STOCK SHIP TODAY |
| 1 | ||
![]() EBV Elektronik | FDN5618P | onsemi | Power MOSFET P Channel 60 V 125 A 017 ohm SuperSOT Surface Mount (Alt: FDN5618P) RoHS : Compliant | 1,593,000 | ||
| BCP56-16 | STMicroelectronics | Trans GP BJT NPN 80V 1A 4Pin3Tab SOT223 TR (Alt: BCP56-16) RoHS : Compliant | 218,000 | |||
| GWJCLPS2.EM-H3H8-XX56-1-65-2-R33 | ams OSRAM Group | LED Chip Warm White 3500K 150mA 2Pin SMD TR (Alt: Q65112A8954) RoHS : Compliant | 90,000 | |||
| GWCPSRM1.PM-N7N9-XX56-1-700-R33 | ams OSRAM Group | OSLON SQUARE (Alt: Q65115A2142) RoHS : Compliant | 54,000 | |||
| GWJTLPS1.EM-KMLL-XX56-1-150-SA-R33 | ams OSRAM Group | DURIS E 2835 Gen2 Version 3500K CRI80 3 SDCM (Alt: Q65113A0823) RoHS : Compliant | 40,000 | |||
| GWP9LR35.PM-M3M8-XX56-1-180-R18 | ams OSRAM Group | DURIS S8 CRI 70 3500K (Alt: Q65113A5373) RoHS : Compliant | 15,000 | |||
| LYE67F-BACA-56-1-50-R18-Z | ams OSRAM Group | PTOPLED YELLOW (Alt: Q65111A2253) RoHS : Compliant | 10,000 | |||
| GWPLLRA1.EM-M9N1-XX56-1-700-R18 | ams OSRAM Group | LED Chip Warm White 3500K 15A 3Pin CSP TR (Alt: Q65113A0538) RoHS : Compliant | 4,500 | |||
| MCP2561-E/SN | Microchip Technology Inc | CAN Transceiver 1 TX 1 RX 45 V to 55 V 8 Pins NSOIC (Alt: MCP2561-E/SN) RoHS : Compliant | 3,600 | |||
| HDSP-561E | Broadcom Limited | (Alt: HDSP-561E) RoHS : Compliant | 1,920 | |||
| MPC561MZP56 | NXP Semiconductors | MCU 32bit MPC56xx e200 RISC ROMLess 26V5V 388Pin BGA Tray (Alt: MPC561MZP56) RoHS : Not Compliant | 400 | |||
| MCP2561FD-E/SN | Microchip Technology Inc | CAN Interface Transceiver CAN FD Transceiver 8 Mbps 45 V 55 V SOIC 8 Pins (Alt: MCP2561FD-E/SN) RoHS : Compliant | 100 | |||
AT28C256-15SU![]() | Microchip Technology Inc | EEPROM Parallel 256Kbit 32K x 8 5V 28Pin SOIC (Alt: AT28C256-15SU) RoHS : Compliant | 81 | |||
AT17LV256-10JU![]() | Microchip Technology Inc | EEPROM Serial2Wire 256Kbit 256K x 1 33V5V 20Pin PLCC (Alt: AT17LV256-10JU) RoHS : Compliant | 48 | |||
| VS-VSKT56/16 | Vishay Intertechnologies | (Alt: VS-VSKT56/16) RoHS : Compliant | 10 | |||
![]() FDH Electronics | BACC63CT25-61SE-LC | SOURIAU-SUNBANK | Connector |
| 91 | |
| DTS20T25-61BD | TE Connectivity | Connector |
| 31 | ||
| DTS24W25-61SD-LC | TE Connectivity | Connector |
| 15 | ||
| DIV46E25-61PA-023-LC | TE Connectivity | Connector |
| 15 | ||
| 5617938-169 | SOURIAU-SUNBANK | Connector Acc | 8 | |||
| 556160035-2 | FDH Electronics | BJG Microwave C | 7 | |||
| DTS24W25-61BC | TE Connectivity | Connector |
| 5 | ||
| S4561C1605S4-34 | SOURIAU-SUNBANK | Backshells & Ac | 5 | |||
| 5617636-16 | SOURIAU-SUNBANK | Backshells & Ac | 4 | |||
| 5617649 | Glenair Inc | Wire Management |
| 2 | ||
| MWDM1L-15GP-6E5-61F | Glenair Inc | Connector | 0 | |||
| 1345-056-1131 | Aero-Electric Connector Inc | Shell | 0 | |||
| 5610-E-2001 | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
| 165-61-1008 | Amphenol Aerospace | Circular Conn | 0 | |||
| MS25356-1 | Safran Electrical & Power UK | Switches | 0 | |||
![]() Pasternack Enterprises US | PE3C5561-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Limited Detent SMP Male Bulkhead to Reverse Polarity TNC Jack Bulkhead Cable 6 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly limited detent SMP male bulkhead to reverse polarity TNC jack bulkhead cable 6 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Limited detent SMP male bulkhead to reverse polarity TNC jack bulkhead cable 6 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and reverse polarity TNC bulkhead cable connection on the other. Our SMP to reverse polarity TNC cable assembly has male gender on end 1 and jack on end 2. PE3C5561-6 can also be known as a SMP plug to reverse polarity TNC female cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMP plug to reverse polarity TNC female cable assembly PE3C5561-6 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to TNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder/solder attachment method and a brass body with gold plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C5561-6 RF cable are available on our downloadable PDF datasheet.PE3C5561-6 can also be used in the other direction and will be reverse polarity TNC jack bulkhead to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to TNC reverse polarity female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to TNC cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP RF cable assembly as per your requirements. |
| 357 | |
| PE3561-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMC Plug Cable 48 Inch Length Using RG178 Coax., Radio frequency assembly SMA male to SMC plug cable 48 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMC plug cable 48 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMC cable connection on the other. Our SMA to SMC cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMC cable is a male to plug coax assembly, PE3561-48, can also be known as a SMA plug to SMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMC male cable assembly PE3561-48 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3561-48 can also be used in the other direction and will be SMC plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMC plug cable 48 inch length using RG178 coax. |
| 99 | ||
| PE3561LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to SMC Plug Cable 24 Inch Length Using RG178 Coax, RoHS., Radio frequency assembly SMA male to SMC plug cable 24 inch length using RG178 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMC plug cable 24 inch length using RG178 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMC cable connection on the other. Our SMA to SMC cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMC cable is a male to plug coax assembly, PE3561LF-24, can also be known as a SMA plug to SMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMC male cable assembly PE3561LF-24 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3561LF-24 can also be used in the other direction and will be SMC plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMC plug cable 24 inch length using RG178 coax, RoHS. |
| 99 | ||
| PE356-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141, RF Cable Type: PE-P141, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female to N Male Precision Cable 12 Inch Length Using PE-P141 Coax, RoHS., Radio frequency assembly SMA female to N male precision cable 12 inch length using PE-P141 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to N male precision cable 12 inch length using PE-P141 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our precision SMA to N type cable assemblies have a female gender on end 1 and male on end 2. This SMA to type N cable is a female to male coax assembly, PE356-12, can also be known as a precision SMA jack to type N plug cable assembly and will be shipped same-day as it is purchased. SMA jack to N type plug cable assembly PE356-12 is built with PE-P141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency SMA female to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE356-12 can also be used in the other direction and will be type N male to SMA female cable assembly if the opposite connectivity is required. Precision SMA jack to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to N male precision cable 12 inch length using PE-P141 coax, RoHS. |
| 59 | ||
| PE3W05610-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. Reverse Polarity TNC Female Bulkhead to Reverse Polarity TNC Male Cable 12 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly reverse polarity TNC female bulkhead to reverse polarity TNC male cable 12 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity TNC female bulkhead to reverse polarity TNC male cable 12 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC bulkhead cable connection on one end and reverse polarity TNC cable connection on the other. Our reverse polarity TNC to reverse polarity TNC cable assemblies have a female gender on end 1 and male on end 2. This reverse polarity TNC to reverse polarity TNC cable is a female to male coax assembly, PE3W05610-12, can also be known as a reverse polarity TNC jack to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC jack to reverse polarity TNC plug cable assembly PE3W05610-12 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable reverse polarity TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency reverse polarity TNC female bulkhead to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05610-12 can also be used in the other direction and will be reverse polarity TNC male to reverse polarity TNC female bulkhead cable assembly if the opposite connectivity is required. TNC reverse polarity jack bulkhead to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC female bulkhead to reverse polarity TNC male cable 12 inch length using PE-SR402FLJ coax. |
| 20 | ||
| PE45612 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: 2.4mm, Connector Gender: Female, Body Style: Straight, Attachment Method: Field Replaceable, Mount Method: 4 Hole Flange, Minimum Frequency: DC, Maximum Frequency: 50 GHz, Interface Type 1: 0.015 inch Pin. 2.4mm Female Field Replaceable Connector 4 Hole Flange Mount 0.015 inch Pin, .340 inch Hole Spacing, with Metal Contact Ring. PE45612 2.4mm female 4 hole flange connector has an interface type of 0.015 inch pin and a impedance. Pasternack 2.4mm female 4 hole flange connector uses shield/contact as an attachment method. Our female 2.4mm connector provides a minimum frequency of DC and a maximum frequency of 50 GHz. The Pasternack 2.4mm female 4 hole flange connector has a PEI dielectric type and a VSWR of 1.2. The Pasternack 2.4mm connector has a passivated stainless steel body. Our PE45612 2.4mm connector uses beryllium copper contact. This 2.4mm female 4 hole flange RF connector is REACH compliant. This Pasternack female 2.4mm 4 hole flange connector will ship the same day as purchased. Our 4 hole flange 2.4mm female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 2.4mm connector cable assemblies that will ship the same day as well. |
| 4 | ||
| PE3C10456-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Female Bulkhead to 2.92mm Female Bulkhead Cable 12 Inch Length Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 2.92mm female bulkhead cable 12 inch length using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 2.92mm female bulkhead cable 12 inch length using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a 2.92mm bulkhead cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a female gender on end 1 and a female on end 2. PE3C10456-12 can also be known as a 2.92mm jack to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our bulkhead 2.92mm female to bulkhead 2.92mm female cable has a maximum VSWR of 1.4:1. 2.92mm jack to 2.92mm jack cable assembly PE3C10456-12 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. 2.92mm jack bulkhead to 2.92mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. |
| 2 | ||
| PE35613/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. N Male Right Angle to HN Male Cable 72 Inch Length Using RG225 Coax with HeatShrink., Radio frequency assembly N male right angle to HN male cable 72 inch length using RG225 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to HN male cable 72 inch length using RG225 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to HN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and HN cable connection on the other. Our right angle type N to HN cable assembly has male gender on end 1 and male on end 2. PE35613/HS-72 can also be known as a right angle type N plug to HN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. Type N plug to HN plug cable assembly PE35613/HS-72 is built with RG225 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to HN cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE35613/HS-72 RF cable are available on our downloadable PDF datasheet.PE35613/HS-72 can also be used in the other direction and will be HN male to right angle type N male cable assembly if the opposite connectivity is required. Type N right angle plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to HN cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W15619 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. Limited Detent SMP Male Bulkhead to N Female 4 Hole Flange Cable Using PE-SR405FLJ Coax. PE3W15619 is a SMP male bulkhead to N female 4 hole flange cable using PE-SR405FLJ coax. This Pasternack SMP male bulkhead to N female 4 hole flange cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm N for connector 2. Our male SMP bulkhead to female N 4 hole flange cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W15619 SMP male bulkhead to N female 4 hole flange cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3W19561 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack Bulkhead to TNC Male Cable Using PE-SR405AL Coax. PE3W19561 is a BMA jack bulkhead to TNC male cable using PE-SR405AL coax. This Pasternack BMA jack bulkhead to TNC male cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm TNC for connector 2. Our jack BMA bulkhead to male TNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W19561 BMA jack bulkhead to TNC male cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3C2561LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to MCX Plug Cable Using LMR-100 Coax, LF Solder. PE3C2561LF is a SMA male right angle to MCX plug cable using LMR-100A coax. This Pasternack SMA male right angle to MCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. SMA right angle to MCX coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2561LF SMA male right angle to MCX plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C5610 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug Right Angle to SMA Male Cable Using RG316 Coax., Radio frequency assembly 1.0/2.3 plug right angle to SMA male cable using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.0/2.3 plug right angle to SMA male cable using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle 1.0/2.3 cable connection on one end and SMA cable connection on the other. Our right angle 1.0/2.3 to SMA cable assemblies have a plug gender on end 1 and male on end 2. This 1.0/2.3 to SMA cable is a plug to male coax assembly, PE3C5610, can also be known as a right angle 1.0/2.3 male to SMA plug cable assembly and will be shipped same-day as it is purchased. 1.0/2.3 male to SMA plug cable assembly PE3C5610 is built with RG316 which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with right angle 1.0/2.3 to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency 1.0/2.3 right angle plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5610 can also be used in the other direction and will be SMA male to right angle 1.0/2.3 plug cable assembly if the opposite connectivity is required. 1.0/2.3 right angle male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to SMA cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.0/2.3 plug right angle to SMA male cable using RG316 coax. | 0 | |||
| PE3W02356-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Male to TNC Male Cable 100 CM Length Using LMR-600-DB Coax., Radio frequency assembly N male to TNC male cable 100 cm length using LMR-600-DB coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to TNC male cable 100 cm length using LMR-600-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our N type to TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to TNC cable is a male to male coax assembly, PE3W02356-100CM, can also be known as a N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3W02356-100CM is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02356-100CM can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male cable 100 cm length using LMR-600-DB coax. |
| 0 | ||
| PE3W04561 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. TNC Male to N Female Cable Using LMR-400-UF Coax. PE3W04561 is a TNC male to N female cable using LMR-400-UF coax. This Pasternack TNC male to N female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our male TNC to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04561 TNC male to N female cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W05614 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to BNC Female Cable Using RG58 Coax. PE3W05614 is a TNC male right angle to BNC female cable using RG58 coax. This Pasternack TNC male right angle to BNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm BNC for connector 2. TNC right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05614 TNC male right angle to BNC female cable assembly is constructed with RG58 coax. | 0 | |||
![]() TE Connectivity | 350561-3 | TE Connectivity | UMNL PIN 24-18 .0126 PTPPHBZ Contact Mating Area Plating Material: Tin (Sn) Contact Type: Pin Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 24 – 18 AWG Operating Voltage: 600 VAC Tin (Sn) Pin Pre-Tin 24 – 18 AWG | Connector Contact | Part Number: 350561-3 | Internal Number: 350561-3 | Alias Number: 405331331 | TE Connectivity RoHS : Compliant |
| 58,713 | |
| 63561-1 | TE Connectivity | SPLICE 10000-16000 CMA 031BR Splice Type: Thru Splice Wire Size: 10 – 8 AWG Wire Size: 5 – 8 mm² Wire Size: 10000 – 16000 CMA Insulation Option: Uninsulated Thru Splice 10 – 8 AWG 5 – 8 mm² 10000 – 16000 CMA | Electrical Wire Splice | Part Number: 63561-1 | Internal Number: 63561-1 | TE Connectivity RoHS : Compliant |
| 47,594 | ||
| 5-146256-1 | TE Connectivity | 02 MODII HDR DRST B/A .100CL LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 2 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5-146256-1 | Internal Number: 5-146256-1 | TE Connectivity RoHS : Compliant |
| 24,021 | ||
| 0460-256-12233 | TE Connectivity | PIN, SOLID, SIZE 12,16-18AWG,PD/NI/AU Terminal Type: Pin Wire Size: 16 – 18 AWG Wire Size: .75 – 1.5 mm² Interface Plating: Palladium Nickel (PdNi) Primary Locking Feature: Integrated in Housing Pin 16 – 18 AWG .75 – 1.5 mm² Palladium Nickel (PdNi) | Deutsch Connector Solid Contact | Part Number: 0460-256-12233 | Internal Number: 0460-256-12233 | Alias Number: ZPF000000000131867 | TE Connectivity RoHS : Compliant |
| 17,441 | ||
| 641256-1 | TE Connectivity | BLADE TAB 250 18-14AWG BR LP Quick Disconnect Terminal Type: Tab Insulation Option: Uninsulated Wire Size: 18 – 14 AWG Wire Size: .82 – 2.08 mm² Mating Tab Width: 6.35 mm Tab Uninsulated 18 – 14 AWG .82 – 2.08 mm² | Quick Disconnect | Part Number: 641256-1 | Internal Number: 641256-1 | TE Connectivity RoHS : Compliant |
| 7,359 | ||
| 223956-1 | TE Connectivity | STV ERMZUB FUEHRUNGSBOLZEN J * M 1 * * * Connector Hardware Accessory Type: Guide Pin Module Primary Product Material: Stainless Steel Operating Temperature (Max): 257 °F Operating Temperature (Max): 125 °C Operating Temperature Range: -67 – 257 °F Guide Pin Module Stainless Steel | Connector Hardware | Part Number: 223956-1 | Internal Number: 223956-1 | Alias Number: F98082-000 | TE Connectivity RoHS : Compliant |
| 5,075 | ||
| 2344656-1 | TE Connectivity | WLAN DUAL BAND ANTENNA FPC V 50mm Antenna Type: Flexible PCB (FPC) Band Type: Dual Band Primary Application: Wi-Fi Communication Protocol: Zigbee Bluetooth Wi-Fi Mounting Location: Internal/Embedded Flexible PCB (FPC) Dual Band Wi-Fi Zigbee | Antenna | Part Number: 2344656-1 | Internal Number: 2344656-1 | TE Connectivity RoHS : Compliant |
| 4,018 | ||
| 2465614-9 | TE Connectivity | QP 6.5 HDR ASSY, 2P, BROWN, TRAY PKG PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 2 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 2 | PCB Header & Receptacle | Part Number: 2465614-9 | Internal Number: 2465614-9 | TE Connectivity RoHS : Compliant |
| 3,353 | ||
| 2465614-2 | TE Connectivity | QP 6.5 HDR ASSY, 2P, BLUE, TRAY PKG PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 2 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 2 | PCB Header & Receptacle | Part Number: 2465614-2 | Internal Number: 2465614-2 | TE Connectivity RoHS : Compliant |
| 3,293 | ||
| 5767056-1 | TE Connectivity | MICT,260,PLUG,38,ASSY,PDNI PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 38 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5767056-1 | Internal Number: 5767056-1 | Alias Number: 010-5426-00 | TE Connectivity RoHS : Compliant |
| 1,232 | ||
| 2299056-1 | TE Connectivity | SFP+ 1X1 CAGE ASSEMBLY AND CONN, PRESS-F Pluggable Form Factor: SFP+ Pluggable I/O Product Type: Cage Assembly Sealable: No Circuit Application: Signal Operating Temperature Range: -55 – 105 °C SFP+ Cage Assembly | High Speed I/o | Part Number: 2299056-1 | Internal Number: 2299056-1 | TE Connectivity RoHS : Compliant |
| 1,134 | ||
| 5-532956-1 | TE Connectivity | 12 MODII 2PC CE RCPT ASSY, RoH PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 12 PCB Mount Receptacle Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 5-532956-1 | Internal Number: 5-532956-1 | TE Connectivity RoHS : Compliant |
| 669 | ||
| 2323561-1 | TE Connectivity | PL-090045-0.5-9 Primary Product Color: White Label Type: Electrical Cabinet Identification Label Style: Die-Cut Label Adhesive Type: Compressible Polyolefine Foam Adhesive Product Width: 90 mm White Electrical Cabinet Identification Die-Cut Compressible Polyolefine Foam Adhesive | Thermal Transfer Printable Panel Label | Part Number: 2323561-1 | Internal Number: 2323561-1 | 90 mm RoHS : Compliant |
| 500 | ||
| 2821756-1 | TE Connectivity | SLIVER C/A, 74P, STR TO STR,25GHZ,100OHM Cable Assembly Type: Sliver to Sliver Number of Positions: 74 Cable Assembly Length: .5 m Cable Assembly Length: 1.6 ft Data Rate: 25 Gb/s Sliver to Sliver 74 .5 m 1.6 ft | High Speed I/o Cable Assembly | Part Number: 2821756-1 | Internal Number: 2821756-1 | TE Connectivity RoHS : Compliant |
| 76 | ||
| 91556-1 | TE Connectivity | CCII AMP EI SERIES 26-20 ASSY Tool Grade: Premium Crimp Tooling Ratchet Configuration: Not Releasable, Not Adjustable Die Sets Type: Fixed In Tool Specification Type: TE Product Specification (114-) TE Certification: Yes – Certificate Included Premium Crimp Tooling Not Releasable, Not Adjustable Fixed" Tool | Hand Crimping Tool | Part Number: 91556-1 | Internal Number: 91556-1 | TE Connectivity RoHS : Compliant |
| 13 | ||
![]() Teledyne HiRel | 5962-89561012A | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE RoHS : Not Compliant | 0 | ||
| 5962-9561901QXA | Teledyne HiRel | BUFFER/DRIVER, 16-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
| 5962-8956101EA | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE RoHS : Not Compliant | 0 | |||
| 5962-8956101FA | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | UPTF0603-16W-N-1561UT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;1.56K;�0.01% RoHS : Compliant | 0 | ||
| TFCR2512-2W-C-1561DT | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;1.56K;�0.5% RoHS : Compliant | 0 | |||
| TFCR2512-2W-E-8561CT | VENKEL LTD | Thin Film CR;2512;1/2W;�25PPM;8.56K;�0.25% RoHS : Compliant | 0 | |||
| TFCR2512-2W-E-8561FT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�25PPM;8.56K;�1% RoHS : Compliant | 0 | |||
| UPTF0805-10W-E-5561AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�25PPM;5.56K;�0.05% RoHS : Compliant | 0 | |||
| UPTF0805-10W-N-1561CT | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�10PPM;1.56K;�0.25% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-8561UT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;8.56K;�0.01% RoHS : Compliant | 0 | |||
| UPTF2010-2W-P-1561DT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�5PPM;1.56K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-5561FT | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;5.56K;�1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-K-5561FT | VENKEL LTD | Thin Film CR;0805;1/10W;�100PPM;5.56K;�1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-C-5561CT | VENKEL LTD | Thin Film CR;0805;1/8W;�50PPM;5.56K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-5561DT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;5.56K;�0.5% RoHS : Compliant | 0 | |||
| TFCR1210-4W-K-5561FT | VENKEL LTD | Thin Film CR;1210;1/4W;�100PPM;5.56K;�1% RoHS : Compliant | 0 | |||
| SAFC1812X7R202-561KNE | VENKEL LTD | Safety Cap;1812;X7R;X2;560pF;�10% RoHS : Compliant | 0 | |||
| SWCR0603-TK-561JT | VENKEL LTD | Surge Withstanding CR;0603;1/4W;�100PPM;560R;�5% RoHS : Compliant | 0 | |||
![]() Vyrian | AD5611AKSZ-REEL7![]() | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 6us Settling Time, PDSO6 RoHS : Compliant | 10,438 | ||
| AD8561AL/QMLV | Analog Devices Inc | Comparator, 1 Func, 8000uV Offset-Max, CDFP10 | 10,217 | |||
VSP5611RSHR![]() | Texas Instruments | Analog Circuit, 1 Func, 4 Channel, CMOS, PQCC56 RoHS : Compliant | 7,068 | |||
MT5C2561DJ-20PATTR![]() | Micron Technology Inc | Standard SRAM, 256KX1, 20ns, CMOS, PDSO24 | 6,787 | |||
MT5LC2561DJ-12P![]() | Micron Technology Inc | Standard SRAM, 256KX1, 12ns, CMOS, PDSO24 | 6,602 | |||
MT5LC2561DJ-25L![]() | Micron Technology Inc | Standard SRAM, 256KX1, 25ns, CMOS, PDSO24 RoHS : Not Compliant | 6,579 | |||
UCC5611DWPTR![]() | Texas Instruments | SCSI Terminator, 18-Line, 110ohm, BICMOS, PDSO28 RoHS : Compliant | 6,279 | |||
| MT5C2561-25 | Micron Technology Inc | Standard SRAM, 256KX1, 25ns, CMOS, PDIP24 RoHS : Not Compliant | 6,141 | |||
AD561TD/883B![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.25us Settling Time, CDIP16 RoHS : Not Compliant | 6,091 | |||
MT5C2561DJ-25L![]() | Micron Technology Inc | Standard SRAM, 256KX1, 25ns, CMOS, PDSO24 RoHS : Not Compliant | 5,000 | |||
| MT5C2561S12DWC2-10 | Micron Technology Inc | Memory IC | 4,814 | |||
MT5LC2561DJ-20LPAT![]() | Micron Technology Inc | Standard SRAM, 256KX1, 20ns, CMOS, PDSO24 RoHS : Not Compliant | 4,036 | |||
| MT5C2561C-30LAT | Micron Technology Inc | Standard SRAM, 256KX1, 30ns, CMOS, CDIP24 RoHS : Not Compliant | 3,395 | |||
MT5C2561DJ-35PAT![]() | Micron Technology Inc | Standard SRAM, 256KX1, 35ns, CMOS, PDSO24 | 3,207 | |||
| M12L2561616A-6TG2A | Elite Semiconductor Memory Technology Inc | Synchronous DRAM, 16MX16, 5.4ns, CMOS, PDSO54 RoHS : Compliant | 471 | |||
![]() Win Source Electronics | BCX56-16 | Nexperia | TRANS NPN 80V 1A SOT89 RoHS : Compliant |
| 500,000 | |
| 0402WGJ0561TCE | Royal Electronic Factory (Thailand) Co Ltd | Thick Film Resistors - SMD RMC 0402 1/16W 5% T/R-10000 RoHS : Compliant |
| 500,000 | ||
| BQ25619RTWR/BQ25619RTWT | Texas Instruments |
| 92,870 | |||
| BCP5610TA | Diodes Incorporated | TRANS NPN 80V 1A SOT223 RoHS : Compliant |
| 74,800 | ||
| BQ25611DRTWR/BQ25611DRTWT | Texas Instruments |
| 63,710 | |||
AD5611AKSZ-REEL7![]() | Analog Devices Inc | 2.7 V to 5.5 V, RoHS : Compliant |
| 19,480 | ||
BQ25616RTWR![]() | Texas Instruments | IC BATT CHG LI-ION 1CELL 24WQFN / Charger IC Lithium Ion/Polymer 24-WQFN (4x4) RoHS : Compliant |
| 18,000 | ||
| M12L2561616A-6TG2A | Elite Semiconductor Memory Technology Inc | RoHS : Compliant |
| 14,070 | ||
MP5610GQG-Z![]() | Monolithic Power Systems | IC REG CONV LCD 2OUT 10QFN RoHS : Compliant |
| 11,964 | ||
AD5611BKSZ-REEL7![]() | Analog Devices Inc | 2.7 V to 5.5 V, | IC DAC 10BIT V-OUT SC70-6 RoHS : Compliant |
| 5,610 | ||
| 74435561100 | Wurth Elektronik | POWER-CHOKE WE-HCB | FIXED IND 10UH 15A 6.9 MOHM SMD RoHS : Compliant |
| 3,491 | ||
| BCM56143A1KFEBG | Broadcom Limited | 24XGE + 4X1G/2.5G LAYER-2 SWIT |
| 2,559 | ||
TLV5610IPWRG4![]() | Texas Instruments | IC 8 CHANNEL DAC S/O 20-TSSOP RoHS : Compliant |
| 2,300 | ||
IS61LV25616AL-10TL-TR![]() | Integrated Silicon Solution Inc | IC SRAM 4MBIT 10NS 44TSOP RoHS : Compliant |
| 1,980 | ||
TLV5616CD![]() | Texas Instruments | 2.7 V TO 5.5 V LOW POWER 12-BIT DIGITAL-TO-ANALOG CONVERTERS WITH POWER DOWN RoHS : Compliant |
| 127 | ||
![]() Wuhan P&S | FDC5612 | onsemi | N-CH PowerTrench MOSFET 60V,4.3A,55m�� RoHS : Compliant |
| 222,000 | |
BCP56-10T1G![]() | onsemi | NPN Silicon Epitaxial Transistor RoHS : Compliant |
| 116,000 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |