| Datenblatt-Suchmaschine für elektronische Bauteile |
|
5887-P-R49 Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
![]() Avnet Americas | 5558872-1 | TE Connectivity | Modular Connector, RJ22 Jack, 1 x 1 (Port), 4P4C, Cat3, Through Hole Mount - Trays (Alt: 5558872-1) RoHS : Compliant |
| 817 | |
| TNPW0805887KBEEN | Vishay Intertechnologies | - Tape and Reel (Alt: TNPW0805887KBEEN) RoHS : Compliant |
| 0 | ||
| 2-805887-1 | TE Connectivity | - Bag (Alt: 2-805887-1) RoHS : Not Compliant | 0 | |||
| 3-805887-6 | TE Connectivity | - Bulk (Alt: 3-805887-6) RoHS : Not Compliant | 0 | |||
| 7-2151588-7 | TE Connectivity | - Bulk (Alt: 7-2151588-7) RoHS : Not Compliant | 0 | |||
| 3-805887-5 | TE Connectivity | - Bag (Alt: 3-805887-5) RoHS : Not Compliant | 0 | |||
| RCMA05887R0FES03 | Vishay Intertechnologies | - Bag (Alt: RCMA05887R0FES03) RoHS : Compliant |
| 0 | ||
| 6588719-6 | TE Connectivity | - Bulk (Alt: 6588719-6) RoHS : Compliant | 0 | |||
| 63825-8875 | Molex | - Bulk (Alt: 0638258875) RoHS : Compliant |
| 0 | ||
| B65887ER41 | TDK Corporation | Ferrite Core RM Core 42.2mm 30.2mm Power Applications - Trays (Alt: B65887E0000R041) RoHS : Compliant |
| 0 | ||
| MKL999AFGS005 887062 | Intel Corporation | (Alt: MKL999AFGS005 887062) RoHS : Not Compliant |
| 0 | ||
| 1-805887-6 | TE Connectivity | ANVIL,COMBINATION - Bag (Alt: 1-805887-6) RoHS : Not Compliant | 0 | |||
| ERC55887K00BHEK500 | Vishay Intertechnologies | Through Hole Resistor, 887 kohm, ERC Series, 125 mW, ? 0.1%, Axial Leaded, 200 V, Metal Film - Bulk (Alt: ERC55887K00BHEK500) RoHS : Compliant |
| 0 | ||
| CMF55887K00FKEB70 | Vishay Intertechnologies | - Tape and Reel (Alt: CMF55887K00FKEB70) RoHS : Compliant |
| 0 | ||
| CMF65887R00FKEA | Vishay Intertechnologies | - Tape and Reel (Alt: CMF65887R00FKEA) RoHS : Compliant |
| 0 | ||
![]() Newark | LFXTAL085887RL3K | IQD Frequency Products | CRYSTAL, 32MHZ, 8PF, SMD, 3.2MM X 2.5MM; RoHS : Compliant |
| 945 | |
| LFXTAL085887RL3K | IQD Frequency Products | CRYSTAL, 32MHZ, 8PF, SMD, 3.2MM X 2.5MM; RoHS : Compliant |
| 945 | ||
| 35-8875 | Stellar labs (MCM Electronics) | HEADPHONE, 16HZ-20KHZ, 16 OHM; Frequency Response Min:16Hz; Frequency Response Max:20kHz; Impedance:16ohm; Drive Unit Type:Dynamic; Connector Type:3.5mm Connector; Lead Length:3.9ft; Product Range:-; Colour:Black RoHS : Not Compliant |
| 510 | ||
| 5558872-1 | TE Connectivity | RJ22 CONNECTOR, JACK, 4P4C, 1PORT, CAT3; RoHS : Compliant |
| 352 | ||
| B65887E0000R087 | TDK Corporation | FERRITE CORE, RM, N87; RoHS : Compliant |
| 238 | ||
| B65887E0000R041 | TDK Corporation | TRANSFORMER CORE, RM, N41, 70MM; RoHS : Compliant |
| 49 | ||
| 63825-8875 | Molex | HAND CRIMP TOOL LOCATOR, TERMINAL; (Alternate Part Number: 887191517285 RoHS : Not Compliant |
| 9 | ||
| TR00015887-000 | TR Fastenings | SET SCREW, HEX SOCKET, M4 X 10MM, SS A2; RoHS : Compliant |
| 4 | ||
| 785887-01 | NI | SOFTWARE DEFINED RADIO, ENCL; Available until stocks are exhausted RoHS : Compliant |
| 3 | ||
| 2-805887-1 | TE Connectivity | ANVIL-COMBINATION RoHS : Not Compliant | 0 | |||
| 3-805887-5 | TE Connectivity | ANVIL, COMB RoHS : Not Compliant | 0 | |||
| 1-805887-6 | TE Connectivity | ANVIL,COMBINATION RoHS : Not Compliant | 0 | |||
| 5-805887-5 | TE Connectivity | COMB ANVIL RoHS : Not Compliant | 0 | |||
| 4-805887-0 | TE Connectivity | ANVIL, COMB RoHS : Not Compliant | 0 | |||
| 5-805887-4 | TE Connectivity | ANVIL, COMBINATION RoHS : Not Compliant | 0 | |||
![]() Analog Devices Inc | MAX5887EGK+D | Analog Devices Inc | 3.3V, 14-Bit, 500Msps High Dyn RoHS : Compliant |
| 2,146 | |
| MAX5887EVKIT# | Analog Devices Inc | Evaluation Kit MAX5887 (3.3V, |
| 21 | ||
| MAX5887EGK+TD | Analog Devices Inc | 3.3V, 14-Bit, 500Msps High Dyn RoHS : Compliant |
| 0 | ||
| MAX5887EGK/GG8 | Analog Devices Inc | 3.3V, 14-Bit, 500Msps High Dyn RoHS : Not Compliant | 0 | |||
![]() RS | 1755-3/4X60FT (7000058870) | 3M | TAPE, COTTON FRICTION, 60 FT., 3/4 IN., +21 C, 0.015 IN., WOVEN COTTON FABRIC |
| 410 | |
| 23_SMA-50-0-13/111_NH (22658873) | HUBER+SUHNER | RF CONNECTORS / COAXIAL CONNECTORS, STRAIGHT PANEL RECEPTACLE JACK, FLANGE MOUN |
| 75 | ||
| 5558872-1 | TE Connectivity | CAT3 4P4C STRAIGHT THROUGH HOLE UTP RJ22 MODULAR JACK CONNECTOR RoHS : Compliant |
| 49 | ||
| 2345887 | RS Pro | ADHESIVE LINED HEAT SHRINK TUBING, 12.7MM SLEEVE, D X 1.22M L, 3:1 RATIO, BLACK |
| 31 | ||
| HSJ200 (Z235887) | Mersen Electrical Power | FUSE, HIGH SPEED, CLASS J, I.R. 200KA AC/100KA DC, 600VAC/500VDC, 200A |
| 24 | ||
| 952X (7000058873) | 3M | CONN CRIMPTERM QUICKDISCONNECT T-TAP FEMALE 18-14AWG INSUL. SCOTCHLOK |
| 16 | ||
| 33588 (7100132681) | 3M | FILE BELT SANDER CONTACT ARM ASSEMBLY, 457 MM (18 IN) X 13 MM |
| 7 | ||
| 2675887 | RS Pro | EQUIPMENT HOOK-UP WIRE, SINGLE CORE, PVC, 7 STRANDS, 7 0.2MM 500M, YELLOW |
| 3 | ||
| 1365887 | RS Pro | THERMOCOUPLE TYPE K 9.84 FT (3M) 550F (260C) MAX 1/0.3 STRANDING 28AWG |
| 2 | ||
| OXP12X800 (1SCA145887R1001) | ABB Low Voltage Products and Systems | OPERATING SHAFT 31.5" (800MM) |
| 2 | ||
| 1458871 (SACC-E-M12FS-5CON-M16/0 5 VA) | Phoenix Contact | CABLE; SENSOR/ACT; PANEL FEED-THROUGH; 5 POS; M12; SACC-E-M12FS-5CON-M16/0,5 VA |
| 2 | ||
| 7058876 (7059976) | RS Pro | BLACK COMPOSITE TOE BOOT MENS 11 LACE UP LEATHER UPPER COMPOSITE MIDSOLE |
| 1 | ||
| GL10-P4212 (1065887) | SICK AG | PHOTOELECTRIC RETROREFLECTIVE SENSOR,15M AND 12M, VISBL RED, PNP, M12 CONN |
| 1 | ||
| MS6-LFR-1/2-D7-E-R-M (588774) | Festo | FILTER REGULATOR, MS6 SERIES |
| 1 | ||
| 35887 (50358871) | Greenlee Textron Inc | Cell, Load (Brock 4-1058) |
| 0 | ||
![]() Bisco Industries | MS51958-87 | Mac Fastteners Inc | 15 | |||
| MS51958-87 | Pilgrim Screw Corporation | 3 | ||||
| MS51958-87 | MS MACHINE SCREWS | 1 | ||||
![]() Rochester Electronics | MAX5887EGK+D | Analog Devices Inc | MAX5887 - 3.3V, 14-Bit, 500Msps High Dynamic Performance DAC with Differential LVDS Inputs RoHS : Compliant |
| 1,390 | |
MAX5887EGK![]() | Maxim Integrated Products | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time RoHS : Not Compliant |
| 2,417 | ||
![]() Sager | 2-805887-1 | TE Connectivity | Crimpers / Crimping Tools ANVIL-COMBINATION | 0 | ||
| 3-805887-6 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMB | 0 | |||
| 7-2151588-7 | TE Connectivity | Crimpers / Crimping Tools OC-042F114O-CRIMP TOOLING KIT | 0 | |||
| 3-805887-5 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMB | 0 | |||
| 0011325887 | Molex | Molex BRANCH TEE 8MM 1/4 |
| 0 | ||
| 0638858870 | Molex | Crimpers / Crimping Tools TOOL KIT |
| 0 | ||
| 1-805887-6 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMBINATION | 0 | |||
| 5-805887-5 | TE Connectivity | Crimpers / Crimping Tools COMB ANVIL | 0 | |||
| 4-805887-0 | TE Connectivity | Crimpers / Crimping Tools ANVIL, COMB | 0 | |||
| 060-CS92158875518 | HONEYWELL TEST AND MEASUREMENT | FPG1CT,1AK,2U,5S,6M:MODEL FP2000, 0.10% |
| 0 | ||
| 5-805887-4 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMBINATION | 0 | |||
| 6-805887-9 | TE Connectivity | Crimpers / Crimping Tools ANVIL, COMBINATION |
| 0 | ||
| 0825887:B | Phoenix Contact | Wire Labels & Markers SD-WMS 5 (CH):B | 0 | |||
| 1-805887-1 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMBINATION | 0 | |||
| 2-805887-6 | TE Connectivity | Crimpers / Crimping Tools ANVIL-COMBINATION |
| 0 | ||
![]() TME | A5887H | Antenova M2M | Antenna: communication; WiFi; linear; SMD; 50Ω; 2.4÷2.5GHz RoHS : Compliant |
| 1,000 | |
| 2588770000 | Weidmüller Interface GmbH & Co. KG | 2588770000 RoHS : Compliant |
| 288 | ||
| 2-5175887-9 | TE Connectivity | Contact; female; gold-plated; soldering,THT; 1.27mm; vertical RoHS : Compliant |
| 185 | ||
| 5558872-1 | TE Connectivity | Connector: RJ9; socket; PIN: 4; 4p4c; THT; straight; 16.51mm RoHS : Compliant |
| 114 | ||
| 5887 | SOLID TOOLS | Trash bags; blue; 120l; 10pcs. |
| 7 | ||
| MAX5887EGK+D | Analog Devices Inc | IC: D/A converter; 14bit; 500Msps; Ch: 1; -40÷85°C RoHS : Compliant |
| 3 | ||
| 1358870000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; OMNIMATE; 9.5A; 200V RoHS : Compliant |
| 0 | ||
| 95887 | Goobay | Patch cord; U/UTP; Cat 6; RJ45 plug,both sides; stranded; Cu; 5m |
| 0 | ||
| CRCW0805887KFKEA | Vishay Intertechnologies | Resistor: thick film; 887kΩ; SMD; 0805; 125mW; ±1%; 150V; -55÷155°C RoHS : Compliant |
| 0 | ||
| B65887P0000R092 | TDK Corporation | Core: ferrite; RM; N92; 5400nH; 10230mm3; 201mm2; Permeability: 1030 |
| 0 | ||
| B65887E0250A041 | TDK Corporation | Core: ferrite; RM; N41; 250nH; 14000mm3; 200mm2; Permeability: 70 RoHS : Compliant |
| 0 | ||
BQ25887RGET![]() | Texas Instruments | IC: PMIC; battery charging controller; Iout: 2A; 6.8÷9.2V; VQFN24 RoHS : Compliant |
| 0 | ||
| B65887P0000R087 | TDK Corporation | Core: ferrite; RM; N87; 7100nH; 10230mm3; 201mm2; Permeability: 1430 |
| 0 | ||
MSP430FR5887IRGCT![]() | Texas Instruments | IC: MSP430 microcontroller; 16MHz; VQFN64; I2C,IrDA,SPI,UART RoHS : Compliant |
| 0 | ||
| 1158872 | Bossard Group | Screw; M5; M5x14; 0.8; Head: countersunk; Phillips; PH2; steel; zinc |
| 0 | ||
![]() ComSIT USA | LFXTAL015887BULK | IQD Frequency Products | Parallel - Fundamental Quartz Crystal, 3.6864MHz Nom RoHS : Compliant | 450 | ||
![]() Interstate Connecting Components | C-0600-5887-E202 | Tri-Star Electronics International | ARINC CONTACT | 19 | ||
| SA85005887M2 | SOURIAU-SUNBANK | J3804 | 0 | |||
| 058-8765-000 | ITT Interconnect Solutions | 588765000 | 0 | |||
| 10-035887-010 | Amphenol Industrial Operations | CAP ACCY | 0 | |||
| 6-805887-9 | TE Connectivity | ANVIL, COMBINATION |
| 0 | ||
| 5-1633588-7 | TE Connectivity | CRIMPER, WIRE F (.085 ) RoHS : Compliant |
| 0 | ||
| 6-805887-7 | TE Connectivity | ANVIL, COMBINATION |
| 0 | ||
| 374Z-05887 | TE Connectivity | SPEED SEN DSF EH10.19 SHV EX-ATEX (2M) |
| 0 | ||
| 805887-7 | TE Connectivity | ANVIL, COMBINATION(.0335X.055) RoHS : Compliant |
| 0 | ||
| 10-035887-024 | Amphenol Industrial Operations | CAP ACCY | 0 | |||
| BLCC1588707-1 | Amphenol Fiber Systems International | MM DUPLEX, 2 MM | 0 | |||
| 10-035887-016 | Amphenol Industrial Operations | CAP | 0 | |||
| 4-1633588-7 | TE Connectivity | CRIMPER, WIRE F (.057 ) RoHS : Compliant |
| 0 | ||
| 10-035887-018 | Amphenol Industrial Operations | CAP | 0 | |||
| 10-035887-036 | Amphenol Industrial Operations | CAP ACCY | 0 | |||
![]() NexGen Digital | 1658871-1 | TE Connectivity | RoHS : Compliant | 6 | ||
![]() PEI Genesis | 85005887SW | SOURIAU-SUNBANK |
| 240 | ||
| 1135887G4 | SOURIAU-SUNBANK |
| 0 | |||
| 20588.7 | CONTA-CLIP Inc |
| 0 | |||
| 25887.9 | CONTA-CLIP Inc |
| 0 | |||
| 11472588-7 | SOURIAU-SUNBANK |
| 0 | |||
| 1135887G10 | SOURIAU-SUNBANK |
| 0 | |||
| 1135887G7 | SOURIAU-SUNBANK |
| 0 | |||
| 1135887G6 | SOURIAU-SUNBANK |
| 0 | |||
| 1135887G3 | SOURIAU-SUNBANK |
| 0 | |||
| 1135887G5 | SOURIAU-SUNBANK |
| 0 | |||
| S1071-158-.87-12 | SOURIAU-SUNBANK |
| 0 | |||
| ES7588-74H1A | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 5558872-1 | TE Connectivity | Modular Connectors / Ethernet Connectors RoHS : Compliant |
| 1,985 | |
| 2-5175887-1 | TE Connectivity | Connectors RoHS : Compliant |
| 325 | ||
| 3-5175887-0 | TE Connectivity | Connectors RoHS : Compliant |
| 226 | ||
| 8958873001 | TE Connectivity | Connectors RoHS : Compliant |
| 221 | ||
| 85005887SW | SOURIAU-SUNBANK | 851 NI Backnut #18 |
| 158 | ||
| 1658871-1 | TE Connectivity | I/O Connectors RoHS : Compliant |
| 127 | ||
| 5-805887-3 | TE Connectivity | ANVIL, COMBINATION |
| 5 | ||
| 45887010 | Hartmann Electronic | AERO RELAY/CONTACTOR 45887010 |
| 3 | ||
| 805887-1 | TE Connectivity | ANVIL, COMBINATION RoHS : Compliant |
| 2 | ||
| 805887-7 | TE Connectivity | Tools RoHS : Compliant |
| 1 | ||
| 2-1633588-7 | TE Connectivity | Tools RoHS : Compliant |
| 1 | ||
| 9-1633588-7 | TE Connectivity | CRIMPER, WIRE F .118 RoHS : Compliant |
| 1 | ||
| 588701-000 | TE Connectivity | Application Equipment General Purpose |
| 1 | ||
| 805887-3 | TE Connectivity | ANVIL, COMBINATION RoHS : Compliant |
| 1 | ||
| 6-1633588-7 | TE Connectivity | CRIMPER, WIRE F .300 RoHS : Compliant |
| 1 | ||
![]() Richardson RFPD | 135887 | Maxwell Technologies | SUPERCAP ULTRACAP RoHS : Compliant | 0 | ||
| 22658873 | HUBER+SUHNER | Conn SMA 0Hz to 18GHz 50Ohm ST Flange Mount RCP Go RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | CRCW08058871FT | INSTOCK | 15,000 | |||
![]() Avnet Abacus | B65887ER49 | TDK Corporation | Ferrite Core RM Core 422mm 302mm Power Applications (Alt: B65887E0000R049) RoHS : Compliant | 240 | ||
| 1785887 | Phoenix Contact | SMSTB 25 4ST BD41 SO SMSTB254STBD41SO (Alt: 1785887) RoHS : Compliant | 0 | |||
| 1858879 | Phoenix Contact | GIC 25 2STF762 GIC252STF762 (Alt: 1858879) RoHS : Compliant | 0 | |||
| 558879-1 | TE Connectivity | Connector Accessories Cover Top (Alt: 558879-1) RoHS : Compliant | 0 | |||
| 5887078-1 | TE Connectivity | (Alt: 5887078-1) RoHS : Compliant | 0 | |||
| 1055887-1 | TE Connectivity | (Alt: 1055887-1) RoHS : Compliant | 0 | |||
| 3-805887-6 | TE Connectivity | (Alt: 3-805887-6) RoHS : Not Compliant | 0 | |||
| B65887ER41 | TDK Corporation | Ferrite Core RM Core 422mm 302mm Power Applications (Alt: B65887E0000R041) RoHS : Compliant | 0 | |||
| B65887ER87 | TDK Corporation | Ferrite Core RM Core 422mm 302mm Power Applications (Alt: B65887E0000R087) RoHS : Compliant | 0 | |||
| 5-805887-4 | TE Connectivity | (Alt: 5-805887-4) RoHS : Not Compliant | 0 | |||
| 6-805887-9 | TE Connectivity | (Alt: 6-805887-9) RoHS : Compliant | 0 | |||
| 2-805887-6 | TE Connectivity | (Alt: 2-805887-6) RoHS : Not Compliant | 0 | |||
| 6-805887-7 | TE Connectivity | (Alt: 6-805887-7) RoHS : Not Compliant | 0 | |||
| DKTFM33MC5887 | Kyocera AVX Components | (Alt: DKTFM33MC5887) RoHS : Not Compliant | 0 | |||
| DKTFM42WC5887 | Kyocera AVX Components | (Alt: DKTFM42WC5887) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | TNPW0805887KBEEA | Vishay Intertechnologies | (Alt: TNPW0805887KBEEA) RoHS : Compliant | 0 | ||
| 10158875-101LF | Amphenol Corporation | (Alt: 10158875-101LF) RoHS : Compliant | 0 | |||
| 588742-000 | TE Connectivity | Cable Accessories Solder Sleeve Shield Terminator Cross-Linked Polyvinylidene Fluoride Transparent (Alt: 588742-000) RoHS : Not Compliant | 0 | |||
| TC358871XBG(NOK) | Toshiba America Electronic Components | (Alt: TC358871XBG(NOK)) RoHS : Compliant | 0 | |||
![]() Avnet Silica | AL5887JAZW52-13 | Diodes Incorporated | (Alt: AL5887JAZW52-13) RoHS : Compliant | 4,000 | ||
| A5887H | Antenova M2M | (Alt: A5887H) RoHS : Compliant | 0 | |||
| AL5887-13 | Diodes Incorporated | WQFN52EP I2C SPI 36Channel RGB LED Driver (Alt: AL5887-13) RoHS : Compliant | 0 | |||
| AL5887Q-13 | Diodes Incorporated | WQFN52EP A I2C SPI 36Channel RGB LED Driver (Alt: AL5887Q-13) RoHS : Compliant | 0 | |||
| AL5887QJAZW52-13 | Diodes Incorporated | (Alt: AL5887QJAZW52-13) RoHS : Compliant | 0 | |||
| CS15887_STRADA-IP-2X6-T3-B-90 | LEDIL | Assembly for XTEXPG2XPLLUXEON VOslon Square Gen3 Series LEDS (Alt: CS15887_STRADA-IP-2X6-T3-B-90) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | CRCW0805887RFKEA | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 5,000 | |
| CRCW08058873FRT1 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3,340 | ||
| CRCW08058870FRT1 | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3,000 | ||
| TNPW0805-8.87K-.1%T-9R75 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 1,300 | ||
| TNPW08058871BR75 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 1,300 | ||
| 6588714-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 98 | ||
| 1588763-1 | TE Connectivity | IN STOCK SHIP TODAY | 30 | |||
![]() DB Roberts | 5887 | Heyco | 186-L-18-TIN-R/L | 0 | ||
| 5887-F-250-105-140 | RAF Electronic Hardware | 0 | ||||
| 5887-N-218-105-140 | RAF Electronic Hardware | 0 | ||||
| 5887-N-234-050-165 | RAF Electronic Hardware | 0 | ||||
| 495887 | Essentra Components | 21 HEAT SHRINK TRANSPARENT POL | 0 | |||
| 5887-N-230-060-141 | RAF Electronic Hardware | WASHERS | 0 | |||
| 10258871 | Pop Rivets | SSK63SSHR 5X1K | 0 | |||
![]() EBV Elektronik | E25GSFP28SRX 958873 | Intel Corporation | Intel Ethernet SFP28 SR Optic Single Pack (Alt: 958873) RoHS : Compliant | 0 | ||
| CS15887_STRADA-IP-2X6-T3-B-90 | LEDIL | Assembly for XTEXPG2XPLLUXEON VOslon Square Gen3 Series LEDS (Alt: CS15887_STRADA-IP-2X6-T3-B-90) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 85005887LP | SOURIAU-SUNBANK | Connector 26482 |
| 20 | |
![]() Maritex | BQ25887RGER![]() | Texas Instruments | Battery Management ICs; BQ25887RGER; TEXAS INSTRUMENTS; 24; 1 mm; 4 mm; 4 mm RoHS : Compliant |
| 89 | |
![]() Master Electronics | 2-805887-1 | TE Connectivity | ANVIL-COMBINATION RoHS : Not Compliant |
| 0 | |
| 3-805887-6 | TE Connectivity | ANVIL COMB RoHS : Not Compliant |
| 0 | ||
| 7-2151588-7 | TE Connectivity | OC-042F114O-CRIMPTOOLINGKIT RoHS : Not Compliant |
| 0 | ||
| 3-805887-5 | TE Connectivity | ANVIL COMB RoHS : Not Compliant |
| 0 | ||
| 1-805887-6 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
| 5-805887-5 | TE Connectivity | COMB ANVIL RoHS : Not Compliant |
| 0 | ||
| 4-805887-0 | TE Connectivity | ANVIL COMB RoHS : Not Compliant |
| 0 | ||
| 5-805887-4 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
| 6-805887-9 | TE Connectivity | ANVIL COMBINATION RoHS : Compliant |
| 0 | ||
| 0825887:B | Phoenix Contact | Conductor marking collar labeled with the capital letter: B white Width: 3.2 mm RoHS : Compliant |
| 0 | ||
| 1-805887-1 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
| 2-805887-6 | TE Connectivity | ANVIL-COMBINATION RoHS : Not Compliant |
| 0 | ||
1458871![]() | Phoenix Contact | Sensor/actuator flush-type socket - 5-pos. M12 - A-coded - front/screw mounting with M16 thread - with 0.5 m TPE litz wire - 5 x 0.34 mm² - stainless steel version RoHS : Compliant |
| 0 | ||
| 1695887 | Phoenix Contact | HC-K12/2-I-CT-F RoHS : Compliant |
| 0 | ||
| 5-1633588-7 | TE Connectivity | CRIMPER WIRE 'F' (.085 ) RoHS : Not Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C5887 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. Plenum N Male to SMA Male Low PIM Cable Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887, can also be known as a low PIM N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable using SPP-250-LLPL coax, LF solder. | 732 | ||
| PE3588-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMB Plug to SMB Plug Cable 72 Inch Length Using RG196 Coax., Radio frequency assembly SMB plug to SMB plug cable 72 inch length using RG196 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to SMB plug cable 72 inch length using RG196 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and SMB cable connection on the other. Our SMB to SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE3588-72, can also be known as a SMB male to SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE3588-72 is built with RG196 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMB plug to SMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMB male to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMB plug cable 72 inch length using RG196 coax. |
| 148 | ||
| PE3C5887-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum N Male to SMA Male Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM N type to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-100CM, can also be known as a low PIM N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-100CM can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder. |
| 82 | ||
| PE3C5887-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum N Male to SMA Male Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM N type to SMA cable assemblies have a male gender on end 1 and male on end 2. This N type to SMA cable is a male to male coax assembly, PE3C5887-12, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-12 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder. |
| 82 | ||
| PE3C5887-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum N Male to SMA Male Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This N type to SMA cable is a male to male coax assembly, PE3C5887-150CM, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-150CM can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder. |
| 82 | ||
| PE3C5887-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Plenum N Male to SMA Male Low PIM Cable 200 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-200CM, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3C5887-200CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-200CM can also be used in the other direction and will be SMA male to N type male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder. |
| 82 | ||
| PE3C5887-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 24 inches. Plenum N Male to SMA Male Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This N type to SMA cable is a male to male coax assembly, PE3C5887-24, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-24 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder. |
| 82 | ||
| PE3C5887-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 48 inches. Plenum N Male to SMA Male Low PIM Cable 48 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-48, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3C5887-48 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-48 can also be used in the other direction and will be SMA male to N type male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder. |
| 82 | ||
| PE3C5887-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Plenum N Male to SMA Male Low PIM Cable 50 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-50CM, can also be known as a low PIM N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-50CM can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM N type plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder. |
| 82 | ||
| PE3C5887-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 60 inches. Plenum N Male to SMA Male Low PIM Cable 60 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-60, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3C5887-60 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-60 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder. |
| 82 | ||
| PE3C5887-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 36 inches. Plenum N Male to SMA Male Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-36, can also be known as a low PIM N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-36 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM N type plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder. |
| 76 | ||
| PE3W15887 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. 2.4mm Female Bulkhead to 2.92mm Male Cable Using Tinned RG405 Coax. PE3W15887 is a 2.4mm female bulkhead to 2.92mm male cable using RG405 Tinned coax. This Pasternack 2.4mm female bulkhead to 2.92mm male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm 2.92mm for connector 2. Our female 2.4mm bulkhead to male 2.92mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W15887 2.4mm female bulkhead to 2.92mm male cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3W05887 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. MMCX Jack to SMA Male Right Angle Cable Using Tinned RG405 Coax. PE3W05887 is a MMCX jack to SMA male right angle cable using RG405 Tinned coax. This Pasternack MMCX jack to SMA male right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. MMCX to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack MMCX to male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W05887 MMCX jack to SMA male right angle cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3W25887 | Pasternack Enterprises | 0 | ||||
![]() TE Connectivity | 5558872-1 | TE Connectivity | MJ,TE,4P,W/0 PNL STOPS Connector Profile: Standard Modular Jacks & Plugs Products: RJ Type Jacks & Plugs Connector Contact Density: Standard Modular Connector Style: Jack PCB Mount Orientation: Vertical Standard RJ Type Jacks & Plugs | Rj22 Connector | Part Number: 5558872-1 | Internal Number: 5558872-1 | Alias Number: A08646-000 | TE Connectivity RoHS : Compliant |
| 3,079 | |
| 1658871-1 | TE Connectivity | XFP CAGE ASSY W/ INSULATING TA Pluggable Form Factor: XFP Pluggable I/O Product Type: Cage Assembly Sealable: Yes Circuit Application: Signal Operating Temperature Range: -10 – 70 °C XFP Cage Assembly | High Speed I/o | Part Number: 1658871-1 | Internal Number: 1658871-1 | TE Connectivity RoHS : Compliant |
| 762 | ||
![]() Vyrian | 1858879 | Phoenix Contact | Modular Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 12,155 | ||
MAX5887EGK-D![]() | Maxim Integrated Products | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time RoHS : Not Compliant | 10,353 | |||
| CSD58872Q5D | Texas Instruments | 8,820 | ||||
MSP430FR5887IRGCT![]() | Texas Instruments | RISC Microcontroller, 16-Bit, FRAM, MSP430 CPU, 16MHz, CMOS, PQCC64 RoHS : Compliant | 8,428 | |||
| CSD58874W1015 | Texas Instruments | 5,458 | ||||
| MAX5887EGK/GG8 | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 0.011us Settling Time RoHS : Not Compliant | 5,457 | |||
| MAX5887EGK+TD | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time RoHS : Compliant | 5,308 | |||
| CSD58879Q3D | Texas Instruments | 5,048 | ||||
| CSD58871W10 | Texas Instruments | 4,829 | ||||
MAX5887EGK-TD![]() | Maxim Integrated Products | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time RoHS : Not Compliant | 4,363 | |||
| BQ25887EVM | Texas Instruments | 3,399 | ||||
| CSD58873Q3D | Texas Instruments | 3,390 | ||||
MSP430FR5887IPM![]() | Texas Instruments | RISC Microcontroller, 16-Bit, FRAM, MSP430 CPU, 16MHz, CMOS, PQFP64 RoHS : Compliant | 3,132 | |||
MSP430FR5887IPMR![]() | Texas Instruments | RISC Microcontroller, 16-Bit, FRAM, MSP430 CPU, 16MHz, CMOS, PQFP64 RoHS : Compliant | 3,091 | |||
| TC358870XBG | Toshiba America Electronic Components | Consumer Circuit, CMOS, PBGA80 RoHS : Compliant | 639 | |||
![]() Win Source Electronics | BQ25887RGER![]() | Texas Instruments | IC BAT BALANCER LI-ION 2C 24VQFN RoHS : Compliant |
| 6,730 | |
| TC358870XBG | Toshiba America Electronic Components | RoHS : Compliant |
| 6,000 | ||
| TC358870XBG(NOK) | Toshiba America Electronic Components | Interface - Specialized HDMI Interface Brdge |
| 4,923 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |