 |
Datenblatt-Suchmaschine für elektronische Bauteile |
|
|
Datenblatt-Suchmaschine für elektronische Bauteile |
|
6312ML3JB-T Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
 DigiKey | CPH6312-TL-E | FLIP ELECTRONICS | PCH 4V DRIVE SERIES |
| 252,000 | |
| 78631271520 | Wurth Elektronik | RFI SHLD FINGER BECU GOLD |
| 2,520 | ||
| 78631271520 | Wurth Elektronik | RFI SHLD FINGER BECU GOLD |
| 2,520 | ||
| 78631271520 | Wurth Elektronik | RFI SHLD FINGER BECU GOLD |
| 2,520 | ||
| 1-87631-2 | TE Connectivity | CONN RCPT HSG 16POS 2.54MM RoHS : Compliant |
| 2,008 | ||
| SLM N 11 063 12 G | Fischer Elektronik GmbH & Co KG | Straight, narrow insulator |
| 1,000 | ||
| E3X163121ZA1 | Eaton Bussmann | CRYSTAL 3225 16.384MHZ 12PF |
| 200 | ||
| E3X163121ZA1 | Eaton Bussmann | CRYSTAL 3225 16.384MHZ 12PF |
| 200 | ||
| 6312 | Adafruit Industries | ESP32-S2 REVERSE TFT FEATHER |
| 106 | ||
| 8009-11S-1631-20 | Sullins Connector Solutions | CONN D-SUB RCPT 9POS VERT SOLDER |
| 100 | ||
| 8037-01S-1631-20 | Sullins Connector Solutions | CONN D-SUB RCPT 37POS VERT PRESS |
| 100 | ||
| 45-2631.2AN0.000 | EAO AG | CONFIG SWITCH BODY MUSH PB ILLUM RoHS : Compliant |
| 10 | ||
| 6312 | Elesa SPA | BT-B, FLUTED KNOBS, BRASS BOSS, |
| 8 | ||
CFM-8038BF-1130-631-20 | Same Sky | FAN AXIAL 80X38MM 12VDC WIRE RoHS : Compliant |
| 3 | ||
| 6312 | Pomona Electronics | SMD GRABBER GREEN/YLW SCKT PIN RoHS : Compliant | 0 | |||
 Avnet Americas | 1-329631-2 | TE Connectivity | Connector Accessory, Jam Nut, BNC Connectors - Bulk (Alt: 1-329631-2) RoHS : Compliant |
| 47,357 | |
| 87631-2 | TE Connectivity | - Bulk (Alt: 87631-2) RoHS : Compliant |
| 17,312 | ||
| R222M46312 | Radiall | - Bulk (Alt: R222M46312) RoHS : Not Compliant |
| 425 | ||
| 5413631-2 | TE Connectivity | - Bulk (Alt: 5413631-2) RoHS : Compliant |
| 211 | ||
| ST5M1631-23 | Glenair Inc | - Bulk (Alt: ST5M1631-23) RoHS : Not Compliant |
| 134 | ||
| G63126NF10 | Glenair Inc | - Bulk (Alt: G63126NF10) RoHS : Not Compliant |
| 6 | ||
| CPH6312-TL-E | onsemi | - Tape and Reel (Alt: CPH6312-TL-E) RoHS : Compliant |
| 0 | ||
| 87606-312LF | Amphenol Corporation | Conn Socket Strip RCP 24 POS 2.54mm Solder ST Thru-Hole Tube - Rail/Tube (Alt: 87606-312LF) RoHS : Compliant |
| 0 | ||
| JANS1N6312US | Microchip Technology Inc | - Bulk (Alt: JANS1N6312US) RoHS : Not Compliant |
| 0 | ||
| T1610063121-000 | TE Connectivity | - Bag (Alt: T1610063121-000) RoHS : Compliant |
| 0 | ||
| 77063124P | CTS Corporation | - Bulk (Alt: 77063124P) RoHS : Compliant |
| 0 | ||
| DSC6312JE1CB-080.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 80MHz, 50PPM, 1.8-3.3V, -20 to 70C, 2.5 x 2.0mm - Tape and Reel (Alt: DSC6312JE1CB-080.0000T) RoHS : Not Compliant |
| 0 | ||
| Y1631270R000F9R | VPG Foil Resistors | Res Ultra High Precision Metal Foil 1506 270Ohm 1% 3/10W ?0.2ppm/?C Molded T/R - Tape and Reel (Alt: Y1631270R000F9R) RoHS : Not Compliant |
| 0 | ||
| ZW-06-15-F-D-263-123 | Samtec Inc | - Bulk (Alt: ZW-06-15-F-D-263-123) RoHS : Compliant | 0 | |||
| ECS-286.3-12-33Q-JEN-TR | ECS International Inc | Crystal, AEC-Q200, 28.63636 MHz, SMD, 3.2mm x 2.5mm, 50 ppm, 12 pF, 20 ppm, ECX-33Q Series - Tape and Reel (Alt: ECS-286.3-12-33Q-JEN-TR) RoHS : Compliant |
| 0 | ||
 Newark | 2086-3123/300-000 | WAGO Innovative Connections | TB, WIRE TO BRD, 3POS, 16AWG; Pitch Spacing:5mm; No. of Positions:3Positions; Wire Size AWG Min:24AWG; Wire Size AWG Max:16AWG; Conductor Area CSA:1.5mm²; Wire Connection Method:Push In; Rated Current:17.5A; Rated Voltage:630V RoHS Compliant: Yes RoHS : Compliant |
| 228 | |
| 214763-1205 | Molex | CABLE ASSY, CRIMP PIN-FREE END, 17.7"; RoHS : Compliant |
| 218 | ||
| 78631271520 | Wurth Elektronik | CONTACT FINGER, BERYLLIUM COPPER; RoHS : Compliant |
| 184 | ||
| 78631271520 | Wurth Elektronik | CONTACT FINGER, BERYLLIUM COPPER; RoHS : Compliant |
| 184 | ||
| 2086-3125 | WAGO Innovative Connections | TB, WIRE TO BRD, 5POS, 16AWG; Pitch Spacing:5mm; No. of Positions:5Positions; Wire Size AWG Min:24AWG; Wire Size AWG Max:16AWG; Conductor Area CSA:1.5mm²; Wire Connection Method:Push In; Rated Current:17.5A; Rated Voltage:630V RoHS Compliant: Yes RoHS : Compliant |
| 82 | ||
| E3X163121ZA1 | Eaton Electronics | SURFACE MOUNT CRYSTAL RESONATOR MHZ; RoHS : Compliant |
| 50 | ||
| E3X163121ZA1 | Eaton Electronics | SURFACE MOUNT CRYSTAL RESONATOR MHZ; RoHS : Compliant |
| 50 | ||
| 203263-1234 | Molex | RECT CONTACT, PIN, SMT; RoHS : Compliant |
| 47 | ||
| T1770063121-000 | TE Connectivity | HEAVY DUTY CONN, 1 LEVER, SIZE H6B; RoHS : Compliant |
| 33 | ||
| T1770063125-000 | TE Connectivity | HEAVY DUTY CONN, 1 LEVER, SIZE H6B; RoHS : Compliant |
| 26 | ||
| 0912-6312-020 | Amphenol SV Microwave | RF ATTENUATOR, 2DB, 0.5W, 50 OHM; RF Attenuator Interface Type:SMP Plug to SMP Jack; Attenuation:2dB; Frequency Range:DC to 40GHz; Input Power:500mW; Impedance:50ohm; Attenuator Body Material:Stainless Steel, Beryllium Copper RoHS Compliant: Yes RoHS : Compliant |
| 25 | ||
| T1660163129-000 | TE Connectivity | HEAVY DUTY CONN, 1 LEVER, SIZE H16B; RoHS : Compliant |
| 12 | ||
| 3-2071631-2 | TE Connectivity | CONTACTOR, SPST-NO-DM, 24VDC/800A, PANEL; RoHS : Compliant |
| 9 | ||
| 1SD26-3120-00C-500 | 3M Interconnect | CABLE ASSEMBLY, SDR, M-M, 5M, GREY; (Alternate Part Number: 00051111055144 RoHS : Compliant |
| 4 | ||
| HI-763123 | HANNA Instruments | PROBE, CONDUCTIVITY/TDS, 4-RING/PLATINUM; RoHS : Not Compliant |
| 1 | ||
 Analog Devices Inc | PD86-3-1278-TMCL | Analog Devices Inc | PANdrive™/ Smart Stepper Motor |
| 67 | |
| PD86-3-1260-CANOPEN | Analog Devices Inc | PANdrive™/ Smart Stepper Motor |
| 44 | ||
| PD86-3-1278-CANOPEN | Analog Devices Inc | PANdrive™/ Smart Stepper Motor |
| 38 | ||
| PD86-3-1260-TMCL | Analog Devices Inc | PANdrive™/ Smart Stepper Motor |
| 23 | ||
 RS | 87606-312LF | Amphenol FCi | CONN RECT PCBSOCKET 24CNTS THRU-HOLE 87606SERIES TOPENTRY 2ROW RoHS : Compliant |
| 297 | |
| 656-3122-303F | Dialight | PANEL MOUNT INDICATOR, 1/2 INCH, DOME RED/GREEN, 5VDC WITH LEAD RoHS : Compliant |
| 47 | ||
| 2863120 | RS Pro | 1.5M SNAGLESS CAT6 PATCH CABLE - RED |
| 15 | ||
| 2406312 | RS Pro | CAT6 MALE RJ45 TO MALE RJ45 ETHERNET CABLE, U/UTP, PURPLE PVC SHEATH, 2M |
| 14 | ||
| 5463125 | RS Pro | STRAIGHT CABLE MOUNT SMA CONNECTOR OHM SOLDER TERM. RG402 |
| 11 | ||
| 2453631 (25530844) (HXLI203702000-050RS) | RS Pro | 3/8 X 2, IN HEX HEAD LAG BOLT, GRADE A, ZINC PLATED |
| 9 | ||
| 1863120 | RS Pro | M8 FEMALE STRAIGHT TO UNTERMINATED 4 WIRE STRAIGHT BLACK PVC 2M CORDSET |
| 5 | ||
| 656-3124-304F | Dialight | PANEL MOUNT INDICATOR, 1/2 INCH, DOME RED/GREEN, 24VDC WITH TERMINALS RoHS : Compliant |
| 3 | ||
| 6312 ZJEM | SKF | DEEP GROOVE BALL BEARING, SINGLE SHIELDED |
| 1 | ||
| 6312 | ELESA USA | BT.12 B-M5, FLUTED KNOBS, BRASS BOSS, THREADED BLIND HOLE |
| 0 | ||
| 6312 | Adafruit Industries | ESP32-S2 REVERSE TFT FEATHER WITH WFL - STEMMA QT / QWIIC |
| 0 | ||
| 6312 | SKF | DEEP GROOVE BALL BEARING |
| 0 | ||
| 6312 | FAG Bearings | DEEP GROOVE BB, SINGLE ROW, 60MM ID, 130MM OD, 31MM WIDTH |
| 0 | ||
| 6312 | Koyo Encoder Inc | DEEP GROOVE BALL BEARINGS, 60MM ID, 130MM OD |
| 0 | ||
| 6312 | RACO | PEDASTAL HOUSE FACE PLATE - SINGLE RECEPTACLE |
| 0 | ||
 Microchip Technology Inc | MCP16312-E/MS | Microchip Technology Inc | 30V Input, PWM Synchronous Buck Switching Regulator, MSOP, Projected EOL: 2040-12-16 RoHS : Compliant |
| 52,458 | |
| MIC5363-1.2YMT-TR | Microchip Technology Inc | Single 300mA Low Dropout LDO, UDFN, Projected EOL: 2041-01-20 RoHS : Compliant |
| 29,799 | ||
| MCP16312T-E/MSVAO | Microchip Technology Inc | 30V Input, PWM Synchronous Buck Switching Regulator, MSOP, Projected EOL: 2046-03-01 RoHS : Compliant |
| 2,500 | ||
| JANS1N6312US | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 471 | ||
| 1N6312DUS | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 387 | ||
| 1N6312US | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 195 | ||
| JANS1N6312DUS | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 88 | ||
| JANS1N6312 | Microchip Technology Inc | Voltage Regulator _ B-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 56 | ||
| JAN1N6312CUS | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 11 | ||
| 6312 | Microchip Technology Inc | PULSE DISTRIBUTION AMPLIFIER (E.G., PPS, DC IRIG), 1X8, WITH, Projected EOL: 2051-01-13 - Contact for Pricing | 0 | |||
| 1N6312 | Microchip Technology Inc | Voltage Regulator _ B-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANS1N6312D | Microchip Technology Inc | Voltage Regulator _ B-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 1N6312US/TR | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2050-11-29 RoHS : Compliant |
| 0 | ||
| JANS1N6312CUS/TR | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| DSC6312CE1HA-075.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 75MHz, 50PPM, 1.8-3.3V, -20 to 70C, 3.2 x 2.5mm, VDFN, Projected EOL: 2028-08-02 - Contact for Pricing RoHS : Compliant | 0 | |||
 Bisco Industries | MS18063-12 | Cam-Tech Industries Incorporated | 4,000 | |||
| 1631-256-AL-6 | RAF Electronic Hardware | 2,322 | ||||
| 1631-2545SMODL=.620-12 | RAF Electronic Hardware | 327 | ||||
| AES18C086312EA3A31 | SOCKET SCREWS | 240 | ||||
| 1631-256-A-6 MODL=.400 | RAF Electronic Hardware | 201 | ||||
| 46-312467-1 | RAF Electronic Hardware | 188 | ||||
| AELS8-616-312B | Sherex / Atlas | 124 | ||||
| 1631-256-AL-6 MODL=.400 | RAF Electronic Hardware | 95 | ||||
| 1631-256-AL | RAF Electronic Hardware | 67 | ||||
| MS16631-2118 | MS Retaining Ring | 57 | ||||
| AES14R086312DR2LP3 | SOCKET SCREWS | 43 | ||||
| NAS1096-3-12 | NAS HEX CAP SCREWS | 36 | ||||
| 58-36-31-24 | Southco | 12 | ||||
| NCS 6-3-12 | Misc. Rods and Studs | 9 | ||||
| 68-36-3125A | SOCKET SCREWS | 7 | ||||
 Rochester Electronics | PT6312N | Texas Instruments | Switching Regulator, Voltage-mode, 2A, 600kHz Switching Freq-Max, Hybrid, PSMA12 RoHS : Not Compliant |
| 49 | |
| ISL6312CRZ-TR5338C | Intersil Corporation | Four-Phase Buck PWM Controller for Intel VR10, Vr11 and AMD, 48Ld-QFN RoHS : Compliant |
| 7,800 | ||
MAX6312EUK29D3+ | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.93V, CMOS, PDSO5 RoHS : Compliant |
| 420 | ||
| MAX6312EUK46D3+ | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.63V, CMOS, PDSO5 RoHS : Compliant |
| 763 | ||
| MAX6312EUK46D3+T | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.6V, CMOS, PDSO5 RoHS : Compliant |
| 15,000 | ||
| MAX6312UK29D3 | Maxim Integrated Products | MAX6312 5-Pin, Multiple-Input, Programmable Reset IC RoHS : Not Compliant |
| 20 | ||
| MAX6312UK29D3+ | Maxim Integrated Products | MAX6312 5-Pin, Multiple-Input, Programmable Reset IC RoHS : Compliant |
| 2,519 | ||
| MAX6312UK29D3+T | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.9V, CMOS, PDSO5 RoHS : Compliant |
| 6,983 | ||
| MAX6312UK43D3 | Maxim Integrated Products | MAX6312 5-Pin, Multiple-Input, Programmable Reset IC RoHS : Not Compliant |
| 1,710 | ||
| MAX6312UK43D3+ | Maxim Integrated Products | MAX6312 5-Pin, Multiple-Input, Programmable Reset IC RoHS : Compliant |
| 873 | ||
| MAX6312UK46D3 | Maxim Integrated Products | MAX6312 5-Pin, Multiple-Input, Programmable Reset IC RoHS : Not Compliant |
| 3,355 | ||
| MAX6312UK46D3+ | Maxim Integrated Products | MAX6312 5-Pin, Multiple-Input, Programmable Reset IC RoHS : Compliant |
| 498 | ||
| MAX6312UK46D3+T | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.6V, CMOS, PDSO5 RoHS : Compliant |
| 2,500 | ||
| MAX6312UK46D3-T | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.6V, CMOS, PDSO5 RoHS : Not Compliant |
| 2,350 | ||
| ISL6312ACRZ-T | Renesas Electronics Corporation | Switching Controller, Current/voltage-mode, 1000kHz Switching Freq-Max, PQCC48 RoHS : Compliant |
| 4,000 | ||
 TME | AON6312 | Alpha & Omega Semiconductor | Transistor: N-MOSFET; unipolar; 30V; 83A; 20W; DFN5x6 RoHS : Compliant |
| 1,209 | |
| ONPOW6312F-10ZE/J/G/12V/S | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-ON |
| 3 | ||
| B631-2B1 | GP Batteries Limited | Charger: for rechargeable batteries; Ni-MH |
| 2 | ||
| AP7363-12D-13 | Diodes Incorporated | IC: voltage regulator; LDO,linear,fixed; 1.2V; 1.5A; DPAK; SMD RoHS : Compliant |
| 0 | ||
| AT60-202-1631-22 | Amphenol Corporation | Contact; crimped; for cable RoHS : Compliant |
| 0 | ||
| ONPOW6312C-10E/J/R/24V/S | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-(ON) |
| 0 | ||
| ONPOW6312C-10ZE/J/B/12V/S | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-ON |
| 0 | ||
| ONPOW6312F-10E/J/B/12V/A | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-(ON) |
| 0 | ||
| ONPOW6312F-10ZE/J/Y/12V/S | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-ON |
| 0 | ||
| ONPOW6312H-10E/J/B/24V/A | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-(ON) |
| 0 | ||
| ONPOW6312H-10ZE/J/G/24V/S | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-ON |
| 0 | ||
| MN-63-127 | MODECO EXPERT | Blade; 10pcs; Blades: trapezoidal |
| 0 | ||
| ONPOW6312F-10E/J/Y/12V/S | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-(ON) |
| 0 | ||
| ONPOW6312F-10ZE/J/R/6V/A | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-ON |
| 0 | ||
| ONPOW6312F-10ZE/J/Y/6V/S | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-ON |
| 0 | ||
 ComSIT USA | MCP16312TEMS | Microchip Technology Inc | AVAILABLE EU | 1,030 | ||
ComSIT USA | FDC6312P | Fairchild Semiconductor Corporation | DUAL P-CHANNEL 1.8V POWERTRENCH SPECIFIED MOSFET Small Signal Field-Effect Transistor, 2.3A I(D), 20V, 2-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 69,000 | ||
| MAX6312UK46D3T | Maxim Integrated Products | 5-PIN, MULTIPLE-INPUT, PROGRAMMABLE RESET IC Power Supply Support Circuit, Fixed, 1 Channel, +4.6VV, CMOS, PDSO5 RoHS : Not Compliant | 2,470 | |||
| Y31B63127FPLFG | C&K Switches | Pushbutton Switch, SMD, rated for signal-level applications, for user interface and control functions RoHS : Compliant | 2,000 | |||
| XTL661500HIK28636312TR | SIWARD Crystal Technology Co Ltd | Electronic Component RoHS : Compliant | 1,000 | |||
| 0263125HAT1L | Littelfuse Inc | AXIAL LEAD AND CARTRIDGE FUSE Electric Fuse, Very Fast Blow, 0.125A, 250VAC, 50A (IR), Through Hole, PICO RoHS : Compliant | 200 | |||
| 736312 | WAGO Innovative Connections | PCB TERMINAL STRIP Strip Terminal Block, 10A, 2.5mm2, 2 Row(s), 2 Deck(s) RoHS : Not Compliant | 100 | |||
| 9663127602 | HARTING Technology Group | STAMPED SOLDER PIN, ANGLED WITHOUT GROUNDING BOARD LOCK FEMALE CONNECTOR D Subminiature Connector, 25 Contact(s), Female, 0.109 inch Pitch, Solder Terminal, #4-40, Plug RoHS : Compliant | 41 | |||
 Interstate Connecting Components | 1-87631-2 | TE Connectivity | 16 MODIV HSG DR MRKD .100 POL RoHS : Compliant |
| 280 | |
| T1770063125-000 | TE Connectivity | H6B-TBFH-M25 IP65 HOOD & HOUSING RoHS : Compliant |
| 19 | ||
| 4-2176312-2 | TE Connectivity | RP 1E 0.1W 33K2 0.1% 25PPM 1K RoHS : Compliant |
| 0 | ||
| 9-2176312-5 | TE Connectivity | RP 1E 0.1W 118K 0.1% 25PPM 1K RoHS : Compliant |
| 0 | ||
| 91-631227-29P | Amphenol Aerospace | 0 | ||||
| 87606-312LF | Amphenol FCi | DUBOX RoHS : Compliant |
| 0 | ||
| T1730063125-000 | TE Connectivity | H6B-TBF-M25 RoHS : Compliant |
| 0 | ||
| 1-2176312-3 | TE Connectivity | RP 1E 0.1W 16K5 0.1% 25PPM 1K RoHS : Compliant |
| 0 | ||
| T1610063121-000 | TE Connectivity | H6B-SGR-PG21 RoHS : Compliant |
| 0 | ||
| 356312-000 | TE Connectivity | 81044/11-24-2 RoHS : Compliant | 0 | |||
| 155631-2031 | ITT Interconnect Solutions | MKJ1B7Z6-4SD | 0 | |||
| 2-2176312-6 | TE Connectivity | RP 1E 0.1W 22K6 0.1% 25PPM 1K RoHS : Compliant |
| 0 | ||
| 179631-2 | TE Connectivity | DIAGNOSTIC PLUG HSG 16P BLACK RoHS : Compliant |
| 0 | ||
| 248-8631-240 | ITT Interconnect Solutions | 248-8631-240 | 0 | |||
| 10-560631-28H | Amphenol Aerospace | 0 | ||||
 NexGen Digital | 1-329631-2 | TE Connectivity | RoHS : Compliant | 90 | ||
| 203263-1234 | Molex | 20 | ||||
 PEI Genesis | 27963-12T112 | ITT Interconnect Solutions |
| 265 | ||
| 91-631227-29P | Amphenol Corporation |
| 0 | |||
| ZP-6312-4C | Amphenol Sine Systems |
| 0 | |||
| S4463-12050341ECH | SOURIAU-SUNBANK |
| 0 | |||
| S3596-3-12A | SOURIAU-SUNBANK |
| 0 | |||
| S4163-1210-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| ST5M1631-255 | SOURIAU-SUNBANK |
| 0 | |||
| 12273163-120 | HellermannTyton |
| 0 | |||
| AT60-202-1631-22 | Amphenol Sine Systems |
| 0 | |||
| 0912-6312-020 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
| S5366C-163-12 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/63-12Z | Amphenol PCD |
| 0 | |||
| 12347631-2 | HellermannTyton |
| 0 | |||
| 0912-6312-100 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
| S4463-12050341E | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | RJMG163127101NR | Amphenol Corporation | Connector |
| 960 | |
| 4-87631-2 | TE Connectivity | Connectors RoHS : Compliant |
| 717 | ||
| 8-2176312-8 | TE Connectivity | Resistors RoHS : Compliant |
| 660 | ||
| 2176312-7 | TE Connectivity | Electronic Component RoHS : Compliant |
| 660 | ||
| 179631-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 326 | ||
| 26312-1 | TE Connectivity | DEUTSCH CONNECTOR 26312-1 |
| 323 | ||
| ZPF000000000106312 | TE Connectivity | CONNECTOR (TE INTERNAL REF, MFR PN N/A) |
| 281 | ||
| 27963-12T112 | VEAM | IR CON 16 SKT CRIMP GOLD 20-22 |
| 175 | ||
| T1770063121-000 | TE Connectivity | Power Connectors RoHS : Compliant |
| 54 | ||
| T1250163125-000 | TE Connectivity | Power Connectors RoHS : Compliant |
| 50 | ||
| T1770063125-000 | TE Connectivity | Power Connectors RoHS : Compliant |
| 28 | ||
| 1663128-3 | TE Connectivity | ARINC RoHS : Compliant |
| 24 | ||
| 85763-1201LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 8 | ||
| P1-63121 | OTTO Engineering Inc | Precision Snap-Action Pushbutton Switch RoHS : Compliant |
| 3 | ||
| G63126-10 | Glenair Inc | CONNECTOR ACCESSORIES |
| 1 | ||
 Richardson RFPD | 46-3-12 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | ||
| LFVCXO056312BULK | IQD Frequency Products | Oscillator VCXO 156.25MHz ±50ppm (Stability) LVPEC RoHS : Compliant | 0 | |||
| 767163121GP | CTS Corporation | Res Thick Film NET 120 Ohm 2% 2.3W ±100ppm/C ISOL RoHS : Compliant |
| 0 | ||
| 126312 | Wakefield-Vette | HEAT PIPE RoHS : Compliant |
| 0 | ||
| R571863121 | Radiall | RF Switch SPDT 0MHz to 40GHz 50dB 6-Pin RoHS : Not Compliant |
| 0 | ||
| R51631210T | Radiall | RF COAXIAL SWITCH RoHS : Not Compliant | 0 | |||
| 336312-12-0150 | Amphenol Corporation | Cable Assembly 1.13mm Cable 0.15m SMA to AMC F-M B RoHS : Compliant |
| 0 | ||
| MCP16312T-E/MS | Microchip Technology Inc | Conv DC-DC 4.4V to 30V Synchronous Step Down Singl RoHS : Compliant | 0 | |||
| 906-31-2-23-2-B-0 | Wakefield-Vette | Heat Sink Passive BGA Elliptical Clip Aluminum 2.5 RoHS : Compliant | 0 | |||
| 86-3-12 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant |
| 0 | ||
| 336312-12-0300 | Amphenol Corporation | Cable Assembly Coaxial 0.3m SMA to Coaxial F-M Bag RoHS : Compliant |
| 0 | ||
| R595363125 | Radiall | RF Switch SPDT 0MHz to 6GHz 85dB RoHS : Not Compliant |
| 0 | ||
| 935281363128 | NXP Semiconductors | I2C/SPI Interface 400kHz 2.7V/3.6V 24-Pin HVQFN EP RoHS : Compliant | 0 | |||
| 336312-12-0200 | Amphenol Corporation | Cable Assembly 1.13mm Cable 0.2m SMA to AMC F-M Ba RoHS : Compliant |
| 0 | ||
| SI5338N-B06312-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
 Rutronik | CR63-123-JE | ASJ Holdings Limited | RC2512 12K 5% 1W TK100 RoHS : Compliant |
| 8,000 | |
 Chip 1 Exchange | FDC6312P | onsemi | INSTOCK RoHS : Compliant | 27,300 | ||
| 263-120-RC | Xicon Passive Components | INSTOCK RoHS : Compliant | 4,378 | |||
| 87606-312LF | Amphenol Corporation | INSTOCK | 3,832 | |||
| 4-87631-2 | TE Connectivity | INSTOCK RoHS : Compliant | 1,929 | |||
| PT6312PH | INSTOCK | 1,600 | ||||
| G97R26312HR | Amphenol Corporation | INSTOCK | 1,430 | |||
| JXS63-12-50/50 | Jauch Quartz America | INSTOCK | 850 | |||
| JXS63-12-50/50 | INSTOCK | 850 | ||||
| 413631200 | TE Connectivity | INSTOCK | 555 | |||
| 1631203E | Kobiconn | INSTOCK | 330 | |||
| 35631231051 | INSTOCK | 90 | ||||
| 35631231- | Spelsberg els UK Ltd | INSTOCK | 8 | |||
| 686312124422- | Wurth Elektronik | INSTOCK | 4 | |||
| 1631203E | INSTOCK | 3 | ||||
| ISL6312CRZ | INSTOCK | 1 | ||||
 Avnet Abacus | 872631223 | Molex | (Alt: 872631223) RoHS : Compliant | 6,160 | ||
| 1-329631-2 | TE Connectivity | Connector Accessory Jam Nut BNC Connectors (Alt: 1-329631-2) RoHS : Compliant | 1,000 | |||
| 65863-122LF | Amphenol Corporation | Conn Ejector Header HDR 26 POS 254mm Solder ST ThruHole Tray (Alt: 65863-122LF) RoHS : Compliant | 400 | |||
| 179631-2 | TE Connectivity | Conn Housing PL 16 POS 4mm Crimp ST Panel Mount (Alt: 179631-2) RoHS : Compliant | 0 | |||
| 179631-2 | TE Connectivity | Conn Housing PL 16 POS 4mm Crimp ST Panel Mount (Alt: 179631-2) RoHS : Compliant | 0 | |||
| 1-87631-2 | TE Connectivity | (Alt: 1-87631-2) RoHS : Compliant | 0 | |||
| 1-87631-2 | TE Connectivity | (Alt: 1-87631-2) RoHS : Compliant | 0 | |||
| 77063124P | CTS Corporation | (Alt: 77063124P) RoHS : Compliant | 0 | |||
| 386312402 | Molex | (Alt: 386312402) RoHS : Compliant | 0 | |||
| 9-2176312-5 | TE Connectivity | SMD Chip Resistor 118 kOhm 01 100 mW 0402 1005 Metric Thin Film High Power Precision (Alt: 9-2176312-5) RoHS : Compliant | 0 | |||
| 87606-312LF | Amphenol Corporation | Conn Socket Strip RCP 24 POS 254mm Solder ST ThruHole Tube (Alt: 87606-312LF) RoHS : Compliant | 0 | |||
| RK16312101BR | Alpine Electronics (Asia) Ltd | Potentiometers (Alt: RK16312101BR) RoHS : Compliant | 0 | |||
| T826312A100CEU | Amphenol Corporation | Conn IDC Connector SKT 12 POS 2mm IDT ST Cable Mount (Alt: T826312A100CEU) RoHS : Compliant | 0 | |||
| T1770063125-000 | TE Connectivity | H6BTBFHM25 (Alt: T1770063125-000) RoHS : Compliant | 0 | |||
| RK16312100ZY-0003000623 | Alpine Electronics (Asia) Ltd | ROTARY POTENTIOMETERS RK163121W010KB2F15BD (Alt: 3000623) RoHS : Compliant | 0 | |||
Avnet Asia | PGL6312.221AHLT | Pulse Electronics Corporation | POWER INDUCTOR 220 NH (Alt: PGL6312.221AHLT) RoHS : Compliant |
| 31,500 | |
| PGL6312.151AHLT | Pulse Electronics Corporation | (Alt: PGL6312.151AHLT) RoHS : Compliant |
| 3,900 | ||
| PGL6312.121HLT | Pulse Electronics Corporation | (Alt: PGL6312.121HLT) RoHS : Compliant |
| 600 | ||
| G97R26312HR | Amphenol Corporation | Card Edge Connector, Dual Side, 1.57 mm, 148 Contacts, Surface Mount, Right Angle, Solder (Alt: G97R26312HR) RoHS : Compliant |
| 40 | ||
| PGL6312.900AHLT | Pulse Electronics Corporation | POWER INDUCTOR (Alt: PGL6312.900AHLT) RoHS : Compliant | 0 | |||
| G66R46312HR | Amphenol Corporation | Z-LINK RA 0.5C 92OHM (Alt: G66R46312HR) RoHS : Compliant | 0 | |||
| PGL6312.101AHLT | Pulse Electronics Corporation | POWER INDUCTOR 100UH (Alt: PGL6312.101AHLT) RoHS : Compliant | 0 | |||
| AT60-202-1631-22 | Amphenol Corporation | (Alt: AT60-202-1631-22) RoHS : Compliant | 0 | |||
| PGL6312.101HLT | Pulse Electronics Corporation | (Alt: PGL6312.101HLT) RoHS : Compliant | 0 | |||
| G42V16312HR | Amphenol Corporation | Card Edge Connector, Dual Side, 1.57 mm, 148 Contacts, Surface Mount, Straight, Solder (Alt: G42V16312HR) RoHS : Compliant | 0 | |||
| PGL6312.121AHLT | Pulse Electronics Corporation | POWER INDUCTOR, 120NH (Alt: PGL6312.121AHLT) RoHS : Compliant | 0 | |||
| PGL6312.221HLT | Pulse Electronics Corporation | POWER INDUCTOR, 120NH (Alt: PGL6312.221HLT) RoHS : Compliant | 0 | |||
| 0511631200 | Molex | (Alt: 0511631200) RoHS : Compliant | 0 | |||
| G64V36312HR | Amphenol Corporation | (Alt: G64V36312HR) RoHS : Compliant | 0 | |||
| PGL6312.900HLT | Pulse Electronics Corporation | (Alt: PGL6312.900HLT) RoHS : Compliant | 0 | |||
 Avnet Silica | AP7363-12D-13 | Diodes Incorporated | DIIAP736312D13 (Alt: AP7363-12D-13) RoHS : Compliant | 2,500 | ||
| FDC6312P | onsemi | Dual MOSFET P Channel 20 V 23 A (Alt: FDC6312P) RoHS : Compliant | 0 | |||
| JANS1N6312US | Microchip Technology Inc | (Alt: JANS1N6312US) RoHS : Not Compliant | 0 | |||
| MCP16312-E/MS | Microchip Technology Inc | (Alt: MCP16312-E/MS) RoHS : Compliant | 0 | |||
| MCP16312T-E/MS | Microchip Technology Inc | (Alt: MCP16312T-E/MS) RoHS : Compliant | 0 | |||
| MCP16312T-E/MNY | Microchip Technology Inc | (Alt: MCP16312T-E/MNY) RoHS : Compliant | 0 | |||
| DSC1123DE5-320.6312 | Microchip Technology Inc | MEMS OSC LVDS 3206312MHz 10PPM 2533V 20 to 70C 25 x 20mm (Alt: DSC1123DE5-320.6312) RoHS : Compliant | 0 | |||
 DB Roberts | CAL3-3716-312 | SHEREX FASTENING SO | 0 | |||
| 063120300 | Essentra Components | LATCH, CAM- KEY ALIKE | 0 | |||
| AEHSS-616-312-588 | PennEngineering (PEM) | 3/8-16 | 0 | |||
| 063120461E | Essentra Components | 0 | ||||
| D3-316-312-170 | Southco | D3-316-312-170 | 0 | |||
| AEHSS-616-312-838 | PennEngineering (PEM) | 3/8-16 | 0 | |||
| AELS8-616-312BW | PennEngineering (PEM) | 3/8-16 | 0 | |||
| 466312 | Essentra Components | 0 | ||||
| CAH3-3716-312 | SHEREX FASTENING SO | HALF HEX BODY RIVET NUT 3/8-16 | 0 | |||
| ALS-616-312 | PennEngineering (PEM) | 0 | ||||
| 063120430E | Essentra Components | 0 | ||||
| 0631218DLWNB | Essentra Components | 516-18 DECO LOCK WN BLK M111 | 0 | |||
| 063123230E | Essentra Components | 0 | ||||
| 58-36-31-26 | Southco | 0 | ||||
| 063123239E | Essentra Components | 0 | ||||
 EBV Elektronik | FDC6312P | onsemi | Dual MOSFET P Channel 20 V 23 A (Alt: FDC6312P) RoHS : Compliant | 0 | ||
| 1N6312US | Microchip Technology Inc | (Alt: 1N6312US) RoHS : Compliant | 0 | |||
| JANS1N6312 | Microchip Technology Inc | (Alt: JANS1N6312) RoHS : Compliant | 0 | |||
| HCPL-5631#200 | Broadcom Limited | Optocoupler LogicOut Open Collector DCIN 2CH 8Pin CDIP (Alt: HCPL-5631#200) RoHS : Not Compliant | 0 | |||
| MCP16312-E/MS | Microchip Technology Inc | (Alt: MCP16312-E/MS) RoHS : Compliant | 0 | |||
| JANTX1N6312US | Microchip Technology Inc | (Alt: JANTX1N6312US) RoHS : Not Compliant | 0 | |||
| MCP16312T-E/MS | Microchip Technology Inc | (Alt: MCP16312T-E/MS) RoHS : Compliant | 0 | |||
| MCP16312T-E/MNY | Microchip Technology Inc | (Alt: MCP16312T-E/MNY) RoHS : Compliant | 0 | |||
| JANTX1N6312US/TR | Microchip Technology Inc | (Alt: JANTX1N6312US/TR) RoHS : Not Compliant | 0 | |||
| MIC5363-1.2YMT-TR | Microchip Technology Inc | (Alt: MIC5363-1.2YMT-TR) RoHS : Compliant | 0 | |||
 Flip Electronics | CPH6312-TL-E | onsemi | Stock, Ship Today | 252,000 | ||
 Maritex | 1563124-1 | TE Connectivity | Automotive Connectors; 1563124-1; TE CONNECTIVITY; Red; Yes RoHS : Compliant |
| 16,090 | |
| 1563126-1 | TE Connectivity | Automotive Connectors; 1563126-1; TE CONNECTIVITY; Red; Yes; 16.2 mm RoHS : Compliant |
| 10,288 | ||
| 1563123-1 | TE Connectivity | Automotive Connectors; 1563123-1; TE CONNECTIVITY; Black; 10; Yes RoHS : Compliant |
| 596 | ||
| FDC6312P | onsemi | MOSFETs; FDC6312P; ON SEMICONDUCTOR; 2.3 A; 115 m?; 960 mW; 2 RoHS : Compliant |
| 107 | ||
 Master Electronics | CT2631-2 | Cal Test Electronics | DIY 4MM STKSHTH PLUG SOLD RoHS : Compliant |
| 6 | |
| 4-2176312-2 | TE Connectivity | RP 1E 0.1W 33K2 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 9-2176312-5 | TE Connectivity | RP 1E 0.1W 118K 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| CDLL6312/TR | Microchip Technology Inc | Voltage Regulator RoHS : Compliant |
| 0 | ||
| 000631240 | ITT Interconnect Solutions | Connector | ITT Cannon CIR02R-28-21S-F80-T39-VO RoHS : Compliant |
| 0 | ||
| T1730063125-000 | TE Connectivity | H6B-TBF-M25 RoHS : Compliant |
| 0 | ||
| IEG11-1-63-12.0-91-V | Sensata Circuit Breakers | Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| EXN/M63-125/TC | Thomas & Betts | Adapter - Thread Converter - M63 Male Thread to 1-1/4 Inch NPT Female Thread - UL1203 - Nickel Plated Brass. RoHS : Compliant |
| 0 | ||
| 1-2176312-3 | TE Connectivity | RP 1E 0.1W 16K5 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| T1610063121-000 | TE Connectivity | H6B-SGR-PG21 RoHS : Compliant |
| 0 | ||
| DSC6312JE1CB-080.0000T | Microchip Technology Inc | MEMS OSC LVCMOS 80MHz 50PPM 1.8-3.3V -20 to 70C 2.5 x RoHS : Compliant |
| 0 | ||
| 356312-000 | TE Connectivity | 81044/11-24-2 MOQ Reduction RoHS : Compliant |
| 0 | ||
| ZW-06-15-F-D-263-123 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-F-D-086-312 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-163-120 | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Neutron USA | CFM-8038BF-1130-631-20 | CUI Inc | DC Fan, Sq80x38mm, 12VDC 2.52A, 13kRPM, 98.4CFM, Tach, 3wire |
| 50 | |
| 09663126601 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV FEM SSDP ANG73-254 25 RoHS : Compliant |
| 50 | ||
| 09663126602 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV FEM SSDP ANG73-284 09P RoHS : Compliant |
| 50 | ||
| 906-31-2-23-2-B-0 | Wakefield-Vette | Heat Sinks Chipset Heat Sink with Clip, Pin Fin, 31mm Chip Size, 22.6mm Height, Aluminum RoHS : Compliant |
| 50 | ||
| CFM-8038BF-1130-631-22 | CUI Inc | DC axial fan, Sq80x38 mm, 12Vdc 2.52A, ball 13000 RPM 98.42 CFM TSPWM, 4wire |
| 50 | ||
| 09663127603 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV FEM SSDP ANG73-284 25P RoHS : Compliant |
| 50 | ||
| 09663126600 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV FEM SSDP ANG73-254 25P RoHS : Compliant |
| 50 | ||
| CFM-8038BF-2130-631-22 | CUI Inc | DC axial fan, sq80x38 mm, 24Vdc 1.15A, ball 13000 RPM 98.42 CFM TSPWM, 4wire |
| 50 | ||
| 6312/2TDHP | ebm-papst | DC Fans 172x51 12V 353.1CFM 40W 5500RPM 60dBA BB |
| 50 | ||
| P1-63121 | OTTO Engineering Inc | Basic / Snap Action Switches Precision Snap-Action Pushbutton Switch RoHS : Compliant |
| 9 | ||
| 956-3127-BX | Littelfuse Inc | Control Switches ROT SW IGN/ST 3POS LEVER SLD |
| 8 | ||
| 66312-2-4039 | ebm-papst | Fan Accessories MOTOR GRD 254 DIAM |
| 4 | ||
| P7-631242 | OTTO Engineering Inc | Basic / Snap Action Switches Low-Level Mil Sldr 5A SPST-DB, SPDT-DB |
| 3 | ||
| 09663127602 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV FEM SSDP ANG73-284 09P RoHS : Compliant |
| 0 | ||
| AXG74596312/1 | Axiom Manufacturing | RAM TYPE DDR4 - RAM / STORAGE CAPACITY: 32 - RAM FORM FACTOR LRDIMM 288-PIN - RA |
| 0 | ||
 Pasternack Enterprises US | PE3W03763-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male Right Angle to Reverse Polarity SMA Female Cable 12 Inch Length Using RG142 Coax., Radio frequency assembly SMA male right angle to reverse polarity SMA female cable 12 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to reverse polarity SMA female cable 12 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our right angle SMA to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to reverse polarity SMA cable is a male to female coax assembly, PE3W03763-12, can also be known as a right angle SMA plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity SMA jack cable assembly PE3W03763-12 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5 GHz maximum frequency SMA right angle male to reverse polarity SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03763-12 can also be used in the other direction and will be reverse polarity SMA female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA reverse polarity jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to reverse polarity SMA female cable 12 inch length using RG142 coax. |
| 155 | |
| PE3W17863-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. NEX10 Female Bulkhead to NEX10 Female Bulkhead Low PIM Cable 12 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 12 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 12 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 bulkhead cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has female gender on end 1 and female on end 2. PE3W17863-12 can also be known as a low PIM NEX10 jack to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17863-12 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 jack to NEX10 jack cable assembly PE3W17863-12 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 jack bulkhead to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 74 | ||
| PE3C4963-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Plug Bulkhead to BNC Male Cable 12 Inch Length Using RG400 Coax., Radio frequency assembly slide-on BMA plug bulkhead to BNC male cable 12 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to BNC male cable 12 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BNC cable connection on the other. Our BMA to BNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to BNC cable is a plug to male coax assembly, PE3C4963-12, can also be known as a BMA male to BNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to BNC plug cable assembly PE3C4963-12 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BMA plug bulkhead to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4963-12 can also be used in the other direction and will be BNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to BNC male cable 12 inch length using RG400 coax. |
| 18 | ||
| PE3C100063-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154, RF Cable Type: PE-TC154, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.4mm Male to 2.4mm Male Low Loss Test Cable 12 Inch Length Using PE-TC154 Coax., Pasternack’s PE3C100063-12 low loss test 2.4mm male to 2.4mm male RF cable assembly using PE-TC154 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100063-12 can also be known as a low loss test 2.4mm plug to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100063-12 RF cable has a high temperature resin jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm male cable has a maximum VSWR of 1.4:1. This PE3C100063-12 2.4mm plug to 2.4mm plug cable assembly is built with PE-TC154, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.4mm plug to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements. |
| 14 | ||
| PE3MSA00463-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: PLUG, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Lead Free 2-Slot TRB Plug with Blunt Cut 1553 Cable 12 Inch Length Using 78 Ohm M17/176-00002 Twinax., Radio frequency assembly lead free 2-Slot TRB plug with blunt cut 1553 cable 12 inch length using 78 Ohm M17/176-00002 twinax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 2-Slot TRB plug with blunt cut 1553 cable 12 inch length using 78 Ohm M17/176-00002 twinax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MSA00463-12 can also be known as a 1553 TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MSA00463-12 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00463-12 can also be used in the other direction and will be blunt cut genderless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 2-Slot TRB plug with blunt cut 1553 cable 12 inch length using 78 Ohm M17/176-00002 twinax. |
| 8 | ||
| PE34263-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FL, RF Cable Type: PE-SR401FL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to N Male Cable 12 Inch Length Using PE-SR401FL Coax., Radio frequency assembly SMA male to N male cable 12 inch length using PE-SR401FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 12 inch length using PE-SR401FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE34263-12, can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE34263-12 is built with PE-SR401FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34263-12 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 12 inch length using PE-SR401FL coax. |
| 0 | ||
| PE35963-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to 7/16 DIN Male Cable 12 Inch Length Using RG402 Coax., Radio frequency assembly N male to 7/16 DIN male cable 12 inch length using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN male cable 12 inch length using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and 7/16 DIN cable connection on the other. Our type N to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE35963-12, can also be known as a N type plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN plug cable assembly PE35963-12 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35963-12 can also be used in the other direction and will be 7/16 DIN male to N type male cable assembly if the opposite connectivity is required. Type N plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male cable 12 inch length using RG402 coax. |
| 0 | ||
| PE3C4863-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Plug Bulkhead to TNC Male Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable 12 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863-12, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863-12 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable 12 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3W11263-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 3.5mm Male to Snap-On BMA Jack Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to snap-on BMA jack cable 12 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to snap-on BMA jack cable 12 inch length using PE-SR402FL coax, 3.5mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and BMA cable connection on the other. Our 3.5mm to BMA cable assemblies have a male gender on end 1 and jack on end 2. PE3W11263-12 can also be known as a 3.5mm plug to BMA female cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to BMA female cable assembly PE3W11263-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to BMA cable connectors, has a 50 Ohm impedance. RF specs on this 20 GHz maximum frequency 3.5mm male to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11263-12 can also be used in the other direction and will be BMA jack to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to BMA cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm male to snap-on BMA jack cable 12 inch length using PE-SR402FL coax. |
| 0 | ||
| PE3W06863-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Male Right Angle Cable 12 Inch Length Using RG142 Coax., Radio frequency assembly N male to N male right angle cable 12 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable 12 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle N type cable connection on the other. Our type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3W06863-12, can also be known as a type N plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3W06863-12 is built with RG142 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06863-12 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 12 inch length using RG142 coax. |
| 0 | ||
| PE3C6312 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: LC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to LC Male Right Angle Cable Using RG214 Coax., Radio frequency assembly 7/16 DIN male to LC male right angle cable using RG214 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to LC male right angle cable using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to LC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle LC cable connection on the other. Our 7/16 DIN to right angle LC cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to LC cable is a male to male coax assembly, PE3C6312, can also be known as a 7/16 DIN plug to right angle LC plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to LC plug cable assembly PE3C6312 is built with RG214 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle LC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7/16 DIN male to LC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6312 can also be used in the other direction and will be right angle LC male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to LC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to LC cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to LC male right angle cable using RG214 coax. | 0 | |||
| PE3C8263-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 12 inches. 4.3-10 Male Right Angle to N Male Low PIM Cable 12 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male low PIM cable 12 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male right angle to N male low PIM cable 12 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.3-10 cable connection on one end and type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assemblies have a male gender on end 1 and male on end 2. This 4.3-10 to type N cable is a male to male coax assembly, PE3C8263-12, can also be known as a low PIM right angle 4.3-10 plug to type N plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to N type plug cable assembly PE3C8263-12 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8263-12 can also be used in the other direction and will be N type male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male right angle to N male low PIM cable 12 inch length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3C7963-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 12 inches. 7/16 DIN Male Right Angle to 7/16 DIN Male Right Angle Low PIM Cable 12 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to 7/16 DIN male right angle low PIM cable 12 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male right angle to 7/16 DIN male right angle low PIM cable 12 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low PIM right angle 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3C7963-12, can also be known as a low PIM right angle 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C7963-12 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN right angle male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 7/16 DIN right angle plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male right angle to 7/16 DIN male right angle low PIM cable 12 inch length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3W01963-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to UHF Male Low Loss Cable 12 Inch Length Using LMR-400 Coax., Radio frequency assembly N male to UHF male low loss cable 12 inch length using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to UHF male low loss cable 12 inch length using LMR-400 coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and UHF cable connection on the other. Our low loss N type to UHF cable assemblies have a male gender on end 1 and male on end 2. PE3W01963-12 can also be known as a low loss type N plug to UHF plug cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF plug cable assembly PE3W01963-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01963-12 can also be used in the other direction and will be UHF male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to UHF male low loss cable 12 inch length using LMR-400 coax. |
| 0 | ||
| PE3W06312/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. N Male Right Angle to SMA Male Cable Using LMR-400-DB Coax with HeatShrink. PE3W06312/HS is a N male right angle to SMA male cable using LMR-400-DB coax. This Pasternack N male right angle to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06312/HS N male right angle to SMA male cable assembly is constructed with LMR-400-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
 Sager | 4-2176312-2 | TE Connectivity | RP 1E 0.1W 33K2 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | |
| 0847526312 | Molex | Molex | 0 | |||
| 1-87631-2 | TE Connectivity | Headers & Wire Housings 16P 2 ROW HOUSING RoHS : Compliant |
| 0 | ||
| 9-2176312-5 | TE Connectivity | RP 1E 0.1W 118K 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 45-2631.28N0.000 | EAO AG | Switch Actuators Mushroom-head pushbutton actuator illuminated white transparent D30 momentary front/housing metal RoHS : Compliant |
| 0 | ||
| 704.02-6312 | EAO AG | EAO | 0 | |||
| 0442626312 | Molex | Heavy Duty Power Connectors Term .032 blade Tin 10-12 AWG lng RoHS : Compliant |
| 0 | ||
| 0386906312 | Molex | Barrier Terminal Blocks SR BTS CS PC 12ASY C | 0 | |||
| T1730063125-000 | TE Connectivity | Heavy Duty Power Connectors H6B-TBF-M25 RoHS : Compliant |
| 0 | ||
| SB2163-12(GRAY) | ABB Group | HM SB216312(GRAY) INSUL BOOT TO SPA |
| 0 | ||
| IEG11-1-63-12.0-91-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| EXN/M63-125/TC | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| 9763121056 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9763121100 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9863121123 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
 TE Connectivity | 87631-2 | TE Connectivity | 06 MODIV HSG DR MRKD .100 POL Number of Positions: 6 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Mating Retention Type: Detent Latching Standard Rectangular Connector | 6 Receptacle Housing With | Part Number: 87631-2 | Internal Number: 87631-2 | TE Connectivity RoHS : Compliant |
| 18,991 | |
| 63128-3 | TE Connectivity | TAB, .250 FASTON,MAG-MATE Magnet Wire Terminal Type: Tab Magnet Wire Size: 27 – 23 AWG Magnet Wire Size: .36 – .58 mm Termination Method to Wire & Cable: Insulation Displacement (IDC) Mating Tab Width: .25 in Tab 27 – 23 AWG .36 – .58 mm Insulation Displacement (IDC) | Magnet Wire Terminal | Part Number: 63128-3 | Internal Number: 63128-3 | TE Connectivity RoHS : Compliant |
| 13,892 | ||
| 173631-2 | TE Connectivity | 070 REC CONTRACT 20-16 Terminal Type: Receptacle Wire Size: 20 – 16 AWG Wire Size: .5 – 1.25 mm² Mating Tab Width: .071 in Mating Tab Width: 1.8 mm Receptacle 20 – 16 AWG .5 – 1.25 mm² .071" | Multilock & Receptacle And Tab | Part Number: 173631-2 | Internal Number: 173631-2 | TE Connectivity RoHS : Compliant |
| 10,634 | ||
| 1-87631-2 | TE Connectivity | 16 MODIV HSG DR MRKD .100 POL Number of Positions: 16 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Mating Retention Type: Detent Latching Standard Rectangular Connector | 16 Receptacle Housing With | Part Number: 1-87631-2 | Internal Number: 1-87631-2 | Alias Number: 650-1256-01 | TE Connectivity RoHS : Compliant |
| 2,008 | ||
| T1660163129-000 | TE Connectivity | H16B-SDRH-LB-PG29 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Side Locking | Rectangular Connector Hoods & Base | Part Number: T1660163129-000 | Internal Number: T1660163129-000 | TE Connectivity RoHS : Compliant |
| 48 | ||
| T1629163125-000 | TE Connectivity | H16A-SDRS-M25 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Base Housing Side | Rectangular Connector Hoods & Base | Part Number: T1629163125-000 | Internal Number: T1629163125-000 | TE Connectivity RoHS : Compliant |
| 26 | ||
| T1610063120-000 | TE Connectivity | H6B-SGR-M20 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1610063120-000 | Internal Number: T1610063120-000 | TE Connectivity RoHS : Compliant |
| 25 | ||
| T1620163125-000 | TE Connectivity | H16B-SDR-LB-M25 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1620163125-000 | Internal Number: T1620163125-000 | TE Connectivity RoHS : Compliant |
| 21 | ||
| T1260163121-000 | TE Connectivity | H16B-TGBS-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1260163121-000 | Internal Number: T1260163121-000 | TE Connectivity RoHS : Compliant |
| 19 | ||
| T1770063125-000 | TE Connectivity | H6B-TBFH-M25 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1770063125-000 | Internal Number: T1770063125-000 | TE Connectivity RoHS : Compliant |
| 18 | ||
| T1620063121-000 | TE Connectivity | H6B-SDR-PG21 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1620063121-000 | Internal Number: T1620063121-000 | TE Connectivity RoHS : Compliant |
| 15 | ||
| T1620063120-000 | TE Connectivity | H6B-SDR-M20 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Side Locking | Rectangular Connector Hoods & Base | Part Number: T1620063120-000 | Internal Number: T1620063120-000 | TE Connectivity RoHS : Compliant |
| 9 | ||
| T1610163121-000 | TE Connectivity | H16B-SGR-LB-PG21 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1610163121-000 | Internal Number: T1610163121-000 | TE Connectivity RoHS : Compliant |
| 6 | ||
| 963121-1 | TE Connectivity | JUNIOR TIMMER HOUSING 8POS, AS Nominal Voltage Architecture: 12 V Number of Positions: 8 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Tab Width: 2.8 mm Timer Connector Housing | 12 V 8 Housing for Female Terminals Wire-to-Wire | Part Number: 963121-1 | Internal Number: 963121-1 | 2.8 mm | TE Connectivity RoHS : Compliant |
| 5 | ||
| T1770063121-000 | TE Connectivity | H6B-TBFH-PG21 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1770063121-000 | Internal Number: T1770063121-000 | TE Connectivity RoHS : Compliant |
| 3 | ||
 Teledyne HiRel | 5962-8606312XA | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | ||
5962-8606312QYA | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8606312QXA | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8606312UA | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8606312YA | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | FTC1206X7R631-223KNE | VENKEL LTD | Flex Termination Ceramic Capacitor;1206;X7R;630V;0.022uF;10% RoHS : Compliant | 6,000 | ||
| C0805C0G631-222FNE | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;2200pF;�1% RoHS : Compliant | 0 | |||
| C0805C0G631-2R2CNP | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;2.2pF;�0.25pF RoHS : Compliant | 0 | |||
| C1206C0G631-221JNP | VENKEL LTD | HV Chip Capacitor;1206;C0G;630V;220pF;�5% RoHS : Compliant | 0 | |||
| AGC1206X7R631-221MNE | VENKEL LTD | Auto Grade Capacitor;1206;X7R;630V;220pF;�20% RoHS : Compliant | 0 | |||
| C0805C0G631-221KNE | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;220pF;�10% RoHS : Compliant | 0 | |||
| C0805C0G631-271FNE | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;270pF;�1% RoHS : Compliant | 0 | |||
| C1206C0G631-270JNP | VENKEL LTD | HV Chip Capacitor;1206;C0G;630V;27pF;�5% RoHS : Compliant | 0 | |||
| C1812X7R631-222KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;630V;2200pF;�10% RoHS : Compliant | 0 | |||
| C0805C0G631-221JNE | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;220pF;�5% RoHS : Compliant | 0 | |||
| AGC1206X7R631-221KNE | VENKEL LTD | Auto Grade Capacitor;1206;X7R;630V;220pF;�10% RoHS : Compliant | 0 | |||
| FTC2220X7R631-224KNE | VENKEL LTD | Flex Termination Ceramic Cap;2220;X7R;630V;0.22uF;�10% RoHS : Compliant | 0 | |||
| C1206C0G631-2R0CNP | VENKEL LTD | HV Chip Capacitor;1206;C0G;630V;2.0pF;�0.25pF RoHS : Compliant | 0 | |||
| C1210C0G631-221JNE | VENKEL LTD | HV Chip Capacitor;1210;C0G;630V;220pF;�5% RoHS : Compliant | 0 | |||
| C1808X7R631-271KNE | VENKEL LTD | HV Chip Capacitor;1808;X7R;630V;270pF;�10% RoHS : Compliant | 0 | |||
 Vyrian | 86312CYSL005 | Alpha Wire | Wire And Cable, 12 Conductor(s), 22AWG, 300V, Flexible Cord And Fixture Wire RoHS : Compliant | 16,305 | ||
| MAX6312UK29D1+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.9V, CMOS, PDSO5 RoHS : Compliant | 12,187 | |||
| MAX6312UK46D2+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.63V, CMOS, PDSO5 RoHS : Compliant | 11,977 | |||
| MAX6312UK35D4+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.5V, CMOS, PDSO5 RoHS : Compliant | 11,016 | |||
| MAX6312EUK36D3+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.6V, CMOS, PDSO5 RoHS : Compliant | 10,882 | |||
| MAX6312EUK33D1+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.3V, CMOS, PDSO5 RoHS : Compliant | 10,314 | |||
| MAX6312EUK28D1+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.8V, CMOS, PDSO5 RoHS : Compliant | 10,193 | |||
| MAX6312EUK45D2+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.5V, CMOS, PDSO5 RoHS : Compliant | 9,693 | |||
| MAX6312UK49D4+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.9V, CMOS, PDSO5 RoHS : Compliant | 7,592 | |||
| MAX6312UK40D3+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4V, CMOS, PDSO5 RoHS : Compliant | 7,040 | |||
| MAX6312EUK34D4+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.4V, CMOS, PDSO5 RoHS : Compliant | 6,699 | |||
| MAX6312EUK29D3 | Analog Devices (Maxim Integrated) | 6,682 | ||||
| MAX6312EUK47D1+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.7V, CMOS, PDSO5 RoHS : Compliant | 5,056 | |||
| MAX6312EUK50D2+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +5V, CMOS, PDSO5 RoHS : Compliant | 4,957 | |||
| JANS1N6312US | Microchip Technology Inc | Zener Diode, 3.3V V(Z), 5%, 0.5W, Silicon, Unidirectional RoHS : Not Compliant | 2,566 | |||
 Waytek, Inc. | 956-3124 | Littelfuse Inc | The Cole Hersee 956-3124 is a heavy-duty 3-position ignition switch designed for reliable engine control in automotive and equipment applications. Featuring OFFIGN/ACCSTART positions with anti-restart protection, it prevents accidental re-engagement of the starter. Rated for 12V (10A ACC/IGN, 5A start), it includes five screw terminals, a lever actuator, and sealed construction with O-ring and gasket for durability in harsh environments. |
| 48 | |
 Win Source Electronics | SKY66312-11 | Skyworks Solutions Inc | IC AMP 4G/5G 2.3-2.4GHZ 16MCM RoHS : Compliant |
| 4,438 | |
| MCP16312T-E/MS | Microchip Technology Inc | IC REG BUCK ADJUSTABLE 1A 8MSOP / Buck Switching Regulator IC Positive Adjustable 2V 1 Output 1A 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) RoHS : Compliant |
| 2,400 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
German ▼ 
English
Chinese
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand