 |
Datenblatt-Suchmaschine für elektronische Bauteile |
|
|
Datenblatt-Suchmaschine für elektronische Bauteile |
|
75G-R-T92-R Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
 Master Electronics | ZLTMM-110-75-G-D-260 | Samtec Inc | Conn Elevated Shrouded Header HDR 20 POS 2mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | |
| ZLTMM-122-75-G-D-250 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZLTMM-125-75-G-D-280 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ATS-X50375G-C1-R0 | Advanced Thermal Solutions Inc | 37.5 x 37.5 x 12.5 mm BGA Heat Sink - High Performance maxiFLOW/superGRIP Heat Sink Clip Anodized Aluminum RoHS : Compliant |
| 0 | ||
| UMPS-03-07.5-G-V-S-W-FR | Samtec Inc | 2.00 MM MPOWER ULTRA MIC RoHS : Compliant |
| 0 | ||
| UMPT-08-07.5-G-V-S-W-TR | Samtec Inc | 2.00 MM MPOWER ULTRA MIC RoHS : Compliant |
| 0 | ||
| USCI-200175GA | Delta Power | USCI PRO - 200W - CC 1.75A RoHS : Compliant |
| 0 | ||
| UMPT-05-07.5-G-V-S-W-TR | Samtec Inc | 2.00 MM MPOWER ULTRA MIC RoHS : Compliant |
| 0 | ||
| ZLTMM-115-75-G-D-268 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZLTMM-125-75-G-D-292-36 | Samtec Inc | Conn Elevated Shrouded Header HDR 50 POS 2mm Solder ST Thru-Hole T/R RoHS : Compliant |
| 0 | ||
| APT75GN60BDQ2G | Microchip Technology Inc | Trans IGBT Chip N-CH 600V 155A 536000mW 3-Pin(3+Tab) TO-247 Tube RoHS : Compliant |
| 0 | ||
| 8136-475G4T | TE Connectivity | Programming Jumper Plug - PIN - 4 Position - 2.54mm Pitch - Solder - Straight - Thru-Hole. MOQ Reduction RoHS : Compliant |
| 0 | ||
| 8136-475G4T | TE Connectivity | DIP Switches/SIP Switches JUMPER PLUG ASSY RoHS : Compliant |
| 0 | ||
| LTC075GY | Thomas & Betts | XTRA FLEX® Liquidtight Flexible PVC Conduit - Size 3/4 Inch - Gray - Black Markings - 600 Volts - Oil Resistant - Commercial Grade RoHS : Compliant |
| 0 | ||
| LW6ML-M1C75G | IDEC Corporation | RoHS : Compliant |
| 0 | ||
 Avnet Americas | CR0402-JW-475GLF | Bourns Inc | - Tape and Reel (Alt: CR0402-JW-475GLF) RoHS : Compliant |
| 50,000 | |
74LVC1G175GW,125 | Nexperia | Flip-Flop, Non Inverted, Positive Edge, 74LVC1G175, D, 300 MHz, 50 mA, SC-88 - Tape and Reel (Alt: 74LVC1G175GW,125) RoHS : Compliant |
| 45,000 | ||
| 74LVC1G175GW-Q100H | Nexperia | - Tape and Reel (Alt: 74LVC1G175GW-Q100H) RoHS : Compliant |
| 39,000 | ||
| MP4575GF-P | Monolithic Power Systems | - Tape and Reel (Alt: MP4575GF-P) RoHS : Compliant |
| 5,500 | ||
| NGCL1206UG1R575G1TRF | NIC Components Corp | GNSS (L1) - Tape and Reel (Alt: NGCL1206UG1R575G1TRF) RoHS : Not Compliant |
| 5,000 | ||
| NGCL1206UV1R575G2TRF | NIC Components Corp | - Tape and Reel (Alt: NGCL1206UV1R575G2TRF) RoHS : Not Compliant |
| 5,000 | ||
74AUP1G175GM,115 | Nexperia | Flip Flop, 74AUP1G175, D, 5.7 ns, 615 MHz, 4 mA, 6 Pins, XSON - Tape and Reel (Alt: 74AUP1G175GM,115) RoHS : Compliant |
| 5,000 | ||
| 74AUP1G175GW,125 | Nexperia | Flip Flop, 74AUP1G175, D, 5.7 ns, 615 MHz, 4 mA, 6 Pins, TSSOP - Tape and Reel (Alt: 74AUP1G175GW,125) RoHS : Compliant |
| 3,000 | ||
BSP75GTA | Diodes Incorporated | - Tape and Reel (Alt: BSP75GTA) RoHS : Compliant |
| 2,000 | ||
| NGRL1032UG1R575G1TRF | NIC Components Corp | GNSS (L1) - Tape and Reel (Alt: NGRL1032UG1R575G1TRF) RoHS : Not Compliant |
| 2,000 | ||
| NGRV5030UG1R575G1TRF | NIC Components Corp | GNSS (L1) - Tape and Reel (Alt: NGRV5030UG1R575G1TRF) RoHS : Not Compliant |
| 1,500 | ||
| SCT011H75G3AG | STMicroelectronics | Silicon Carbide MOSFET, Single, N Channel, 110 A, 750 V, 0.015 ohm, H2PAK - Tape and Reel (Alt: SCT011H75G3AG) RoHS : Not Compliant |
| 152 | ||
| RE75G24R9C02 | Vishay Intertechnologies | - Bulk (Alt: RE75G24R9C02) RoHS : Not Compliant |
| 9 | ||
| R75GI3330DQ00J | KEMET Corporation | 0,33 U 160VV - Tape and Reel (Alt: R75GI3330DQ00J) RoHS : Compliant |
| 0 | ||
| R75GI368050H6J | KEMET Corporation | Power Film Capacitor, Metallized PP, Radial Box - 2 Pin, 0.68 uF, ? 5%, Through Hole, 90 V, 160 V - Bulk (Alt: R75GI368050H6J) RoHS : Compliant |
| 0 | ||
 Newark | BSP75GTA | Diodes Incorporated | Mosfet, Smart Switch Sot-223; |Diodes Inc. BSP75GTA RoHS : Compliant |
| 3,928 | |
| BSP75GTA | Diodes Incorporated | Mosfet, Smart Switch Sot-223; |Diodes Inc. BSP75GTA RoHS : Compliant |
| 3,928 | ||
| R75GI34704000J | KEMET Corporation | Cap, 0.47?f, 160V, 5%, Pp, Radial; |Kemet R75GI34704000J RoHS : Compliant |
| 607 | ||
TNY275GN-TL | Power Integrations | Ac/Dc Converter, 15W, 150Deg C; |Power Integrations TNY275GN-TL RoHS : Compliant |
| 130 | ||
| TNY275GN-TL | Power Integrations | Ac/Dc Converter, 15W, 150Deg C; |Power Integrations TNY275GN-TL RoHS : Compliant |
| 130 | ||
| R75GR510050H0J | KEMET Corporation | Cap, Aec-Q200, 10Uf, 160V, Film; Dielectric Type:Metallized Pp; Capacitor Case/Package:Radial Box - 2 Pin; Capacitance:10Μf; Capacitance Tolerance:± 5%; Typical Applications:High Frequency; Capacitor Mounting:Through Hole Rohs Compliant: Yes RoHS : Compliant |
| 112 | ||
| IHLP7575GZER3R3M51 | Vishay Intertechnologies | Inductor, 3.3Uh, Shielded, 36A; |Vishay IHLP7575GZER3R3M51 RoHS : Compliant |
| 81 | ||
| 77-12-3175-G8709 | Parker Chomerics | Emi Shielding Gasket, Fof, 1M; |Chomerics 77-12-3175-G8709 RoHS : Compliant |
| 31 | ||
| R75GI368050H6J | KEMET Corporation | Cap, Aec-Q200, 0.68Uf, 160V, Film; |Kemet R75GI368050H6J RoHS : Compliant |
| 20 | ||
BD675G | onsemi | Trans, Bjt, Single, Darlington, Npn; Available Until Stocks Are Exhausted |Onsemi BD675G RoHS : Compliant |
| 10 | ||
| R75GR468050H0J | KEMET Corporation | Cap, Aec-Q200, 6.8Uf, 160V, Film; |Kemet R75GR468050H0J RoHS : Compliant |
| 8 | ||
| PX191-075GV5 | Omega Engineering | Pressure Transmitter, Gauge, 0-75Psi; |Omega PX191-075GV5 RoHS : Compliant |
| 5 | ||
| FMCA2675/GR-12 | Fairview Microwave Inc | Cbl Assy, Bnc Plug-1.0/2.3 Plug, 12"; |Fairview Microwave FMCA2675/GR-12 RoHS : Not Compliant |
| 1 | ||
| FMCA2675/GR-72 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2675/GR-72 RoHS : Not Compliant |
| 1 | ||
| FMCA2675/GR-300 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2675/GR-300 RoHS : Not Compliant |
| 1 | ||
 Analog Devices Inc | DS2775G+T&R | Analog Devices Inc | 2-Cell, Stand-Alone, Li+ Fuel- RoHS : Compliant | 20,000 | ||
| MAX77675GEWE+T | Analog Devices Inc | Nano Power PMIC with 4-Output RoHS : Compliant |
| 14,000 | ||
| MAX9275GTN/V+ | Analog Devices Inc | 3.12Gbps GMSL Serializers for RoHS : Compliant |
| 3,531 | ||
| MAX17075GTG/V+T | Analog Devices Inc | Boost Reg w/Integrated Charge RoHS : Compliant |
| 2,500 | ||
| DS2775G+ | Analog Devices Inc | 2-Cell, Stand-Alone, Li+ Fuel- RoHS : Compliant |
| 1,727 | ||
| OP275GSZ | Analog Devices Inc | DUAL BUTLER AMPLIFIER IC RoHS : Compliant |
| 953 | ||
| OP275GSZ-REEL7 | Analog Devices Inc | DUAL BUTLER AMPLIFIER IC RoHS : Compliant |
| 873 | ||
| MAX9275GTN+ | Analog Devices Inc | 3.12Gbps GMSL Serializer for C RoHS : Compliant |
| 665 | ||
| MAX9275GTN/V+T | Analog Devices Inc | 3.12Gbps GMSL Serializers for RoHS : Compliant |
| 370 | ||
| OP275GSZ-REEL | Analog Devices Inc | DUAL BUTLER AMPLIFIER IC RoHS : Compliant |
| 31 | ||
| MAX17075GTG/V+ | Analog Devices Inc | Boost Reg w/Integrated Charge RoHS : Compliant |
| 12 | ||
| MAX9275GTN+T | Analog Devices Inc | 3.12Gbps GMSL Serializer for C RoHS : Compliant |
| 0 | ||
OP275GPZ | Analog Devices Inc | DUAL BUTLER AMPLIFIER IC RoHS : Compliant |
| 0 | ||
 RS | LH75G | T&B Fittings | CORD GRIP, NPT THREADS, LOCKNUT INCLUDED, 3/4 INCH, IP68 RATING, NYLON, GRAY |
| 110 | |
| HD4875G | Crydom Inc | SSR RELAY, PANEL MOUNT, IP00, 530VAC/75A, DC IN, ZERO CROSS, LED RoHS : Compliant |
| 10 | ||
| VT307-5G1-01N-F | SMC Corporation of America | VALVE, BODY PORT, 3 PORT DIR OPER, 124VDC GROMMET, 1/8NPT PORT, BRKT |
| 8 | ||
| N6PATCH75GN | StarTech | 75 FT GREEN CAT6 / CAT 6 SNAGLESS PATCH CABLE 75FT |
| 7 | ||
| 2456794 (25530474) (HCI20500175G-050RS) | RS Pro | 1/2-13 X 1 3/4 IN HEX HEAD MACHINE BOLT, GRADE A, GALVANIZED, COARSE |
| 7 | ||
| 2456757 (25530441) (HCI20310075G-100RS) | RS Pro | 5/16-18 X 3/4 IN HEX HEAD MACHINE BOLT, GRADE A, GALVANIZED, COARSE |
| 7 | ||
| LW7F-3C75G | IDEC Corporation | 25MM SELECTOR SWITCH LIGHTED |
| 6 | ||
| BES010J (BES 516-375-G-E5-C-S49) | Balluff Inc | INDUCTIVE SENSOR, 4 MM RANGE, M12 FLUSH, NPN-NC, 10-30 VDC, BES SERIES |
| 6 | ||
TLE4275G | Infineon Technologies AG | REGULATOR, LINEAR VOLTAGE, 3.3V FIXED OUTPUT, LDO, 450MA, TO263-5, TLE4275V33 RoHS : Compliant |
| 5 | ||
| 2450664 (25530217) (HHNI6075G-025RS) | RS Pro | 3/4-10 HEAVY HEX NUT HOT DIP GALVANIZED |
| 5 | ||
| UL PCM 175/75 G (6416320) | FIBOX | PC ENCLOSURE, 7" WIDE X 3" DEEP X 7" HIGH, GRAY COVER, UL 508 |
| 4 | ||
| 135L075G | B&B Electronics Manufacturing Company | TIMING BELT, 0.750" BELT WIDTH, 36 TEETH, 13.5" PITCH LENGTH, SINGLE SIDED |
| 2 | ||
| RGC2P60CM75GEN | Carlo Gavazzi Holding AG | SOLID STATE RELLAY, 3-PHASE, DIN-RAIL, 2-POLE, 73-660VAC, 75A, BOX CLAMP CONNEC |
| 2 | ||
| C1FC75GES | Hammond Power Solutions | POTTED SINGLE PHASE TRANSFORMER, 750 VA, 208/416V PRIMARY, DURABLE CONSTRUCTION |
| 1 | ||
| BUS0021 (BUS R06K1-PPX-02/007-S75G) | Balluff Inc | SENSOR ULTRASONIC, BLOCK, 20-100MM, PNP 1X, NO/NC, M8 4 PIN |
| 1 | ||
 STMicroelectronics | SCT060HU75G3AG | STMicroelectronics | Automotive-grade silicon carbide Power MOSFET 750 V, 58 mOhm typ., 30 A in an HU3PAK package RoHS : Compliant |
| 0 | |
| SCT011H75G3AG | STMicroelectronics | Automotive-grade silicon carbide Power MOSFET 750 V, 11.4 mOhm typ., 110 A in an H2PAK-7 package RoHS : Compliant |
| 0 | ||
| SCT011HU75G3AG | STMicroelectronics | Automotive-grade silicon carbide Power MOSFET 750 V, 11.4 mOhm typ., 110 A in an HU3PAK package RoHS : Compliant |
| 0 | ||
 Microchip Technology Inc | MCP120-475GI/TO | Microchip Technology Inc | Supervisor Open Drain Active Low, TO-92, Projected EOL: 2036-01-01 RoHS : Compliant |
| 27,000 | |
| APT75GN60SDQ2G | Microchip Technology Inc | IGBT Fieldstop Low Frequency Combi 600 V 75 A TO-268, TO-268, Projected EOL: 2046-04-30 RoHS : Compliant |
| 239 | ||
| APT75GN60BG | Microchip Technology Inc | IGBT Fieldstop Low Frequency Single 600 V 75 A TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 201 | ||
| APT75GN120LG | Microchip Technology Inc | IGBT Fieldstop Low Frequency Single 1200 V 75 A TO-264, TO-264, Projected EOL: 2046-04-30 RoHS : Compliant |
| 181 | ||
| APT75GP120JSC30 | Microchip Technology Inc | IGBT PT MOS 7 SiC Combi 1200 V 75 A SOT-227, SOT-227, Projected EOL: 2051-03-27 RoHS : Compliant |
| 170 | ||
| APT75GP120J | Microchip Technology Inc | IGBT PT MOS 7 Single 1200 V 75 A SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 60 | ||
| APT75GP120JDQ3 | Microchip Technology Inc | IGBT PT MOS 7 Combi 1200 V 75 A SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 19 | ||
| TFS1575G | Microchip Technology Inc | TFS1575G, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| APT75GH120J | Microchip Technology Inc | IGBT FAST Fieldstop Low Frequency Single 1200 V 75 A SOT-227, SOT-227, Projected EOL: 2051-09-30 RoHS : Compliant |
| 0 | ||
| APT75GT120JU2 | Microchip Technology Inc | CC0068, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT75GP120B2G | Microchip Technology Inc | IGBT PT MOS 7 Single 1200 V 75 A TO-247 MAX, T-MAX, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT75GN60BDQ2G | Microchip Technology Inc | IGBT Fieldstop Low Frequency Combi 600 V 75 A TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT75GH120BD40 | Microchip Technology Inc | IGBT FAST Fieldstop Low Frequency Combi 1200 V 75 A TO-247, TO-247, Projected EOL: 2050-12-18 RoHS : Compliant |
| 0 | ||
| APT75GN120JDQ3 | Microchip Technology Inc | IGBT Fieldstop Low Frequency Combi 1200 V 75 A SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT75GT120JRDQ3 | Microchip Technology Inc | IGBT NPT Medium Frequency Combi 1200 V 75 A SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
 Bisco Industries | PSPT-187-175-GR | Brady Worldwide Inc | 9,900 | |||
| 2527-5GH | Advanced Interconnect | 575 | ||||
| J2655FAW0375G1ZC | Superior Washer & Gasket Company | 50 | ||||
| J2655FBR0375G1Z | Superior Washer & Gasket Company | 50 | ||||
| OF75GJE | ACTIVE COMPNTS/DIODES | 10 | ||||
 Rochester Electronics | 74LVC1G175GF/S505,125 | NXP Semiconductors | Flip Flop Positive Edge 1 Element 1.8V, 2.5V, 3.3V, 5V 6-SON Tube RoHS : Compliant |
| 6,930 | |
74LVC1G175GF,132 | NXP Semiconductors | Flip Flop Positive Edge 1 Element 1.8V, 2.5V, 3.3V, 5V 6-SON T/R RoHS : Compliant |
| 205,029 | ||
| 74AUP1G175GF,132 | NXP Semiconductors | Flip Flop Positive Edge 1 Element 1.2V, 1.5V, 1.8V, 2.5V, 3.3V 6-SON T/R RoHS : Compliant |
| 72,263 | ||
| 74AUP1G175GW-Q100H | Nexperia | Flip Flop Positive Edge 1 Element 1.2V, 1.5V, 1.8V, 2.5V, 3.3V SOT-363 T/R RoHS : Compliant |
| 93,000 | ||
74LVC1G175GF,132 | Nexperia | Flip Flop Positive Edge 1 Element 1.8V, 2.5V, 3.3V, 5V 6-SON T/R RoHS : Compliant |
| 50,000 | ||
| 74AUP1G175GF,132 | Nexperia | Flip Flop Positive Edge 1 Element 1.2V, 1.5V, 1.8V, 2.5V, 3.3V 6-SON T/R RoHS : Compliant |
| 159,000 | ||
| BSM75GAL120DN2HOSA1 | Infineon Technologies AG | IGBT MOD 1.2kV 105A 625W Tray RoHS : Compliant |
| 97 | ||
BSM75GB60DLCHOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 100A I(C), 600V V(BR)CES, N-Channel RoHS : Compliant |
| 10 | ||
| TLE4275GATMA1 | Infineon Technologies AG | IC VOLT REG Fixed 1 REG 5V 450mA TO-263-6 T/R RoHS : Compliant |
| 441 | ||
| TLE4275G | Infineon Technologies AG | IC VOLT REG Fixed 1 REG 5V 450mA TO-263-6 T/R RoHS : Compliant |
| 170 | ||
| TLE4675GATMA1 | Infineon Technologies AG | IC VOLT REG Fixed 1 REG 5V 400mA TO-263-6 T/R RoHS : Compliant |
| 8,522 | ||
| TLE4275GV33ATMA1 | Infineon Technologies AG | IC VOLT REG Fixed 1 REG 3.3V 400mA TO-263-6 T/R RoHS : Compliant |
| 7,678 | ||
| BSM75GB120DN2_E3223C-SE | Infineon Technologies AG | Insulated Gate Bipolar Transistor Module RoHS : Compliant |
| 24 | ||
| REG1117-5G4 | Burr-Brown Corp | IC VOLT REG Fixed 1 REG 5V 800mA SOT223 Tube RoHS : Compliant |
| 40 | ||
| SI5351C-B10875-GM | Skyworks Solutions Inc | Clock Generators and Synthesizers Clock Generator 200MHz 20-QFN RoHS : Compliant |
| 171 | ||
 Sager | 3188C0075G5 | ABB Group | SOURCE SIDE VOLTAGE SENSOR-MVR 10FT |
| 0 | |
| ZLTMM-110-75-G-D-260 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-122-75-G-D-250 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-125-75-G-D-280 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ATS-X50375G-C1-R0 | Advanced Thermal Solutions Inc | Heat Sinks maxiFLOW superGRIP BGA Heat Sink, T766, Blue-Anodized, 36.75x36.75x12.5mm RoHS : Compliant |
| 0 | ||
| UMPS-03-07.5-G-V-S-W-FR | Samtec Inc | Power to the Board 2.00 mm mPOWER Ultra Micro Power Socket RoHS : Compliant |
| 0 | ||
| UMPT-08-07.5-G-V-S-W-TR | Samtec Inc | Power to the Board 2.00 mm mPOWER Ultra Micro Power Terminal, Vertical RoHS : Compliant |
| 0 | ||
| UTP6A175GR | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6A, Green UTP Cab RoHS : Compliant | 0 | |||
| UMPT-05-07.5-G-V-S-W-TR | Samtec Inc | Power to the Board 2.00 mm mPOWER Ultra Micro Power Terminal, Vertical RoHS : Compliant |
| 0 | ||
| ZLTMM-115-75-G-D-268 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-125-75-G-D-292-36 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 8136-475G4T | TE Connectivity | DIP Switches / SIP Switches JUMPER PLUG ASSY RoHS : Compliant | 0 | |||
| ATS-X53375G-C1-R0 | Advanced Thermal Solutions Inc | Heat Sinks BGA Cooling Solutions w/superGRIP Attachment, High Performance, 37.5x37.5x12.5mm RoHS : Compliant |
| 0 | ||
| LTC075GY | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| LW6ML-M1C75G | IDEC Corporation | Pushbutton Switches 25mm Pushbutton Illuminated |
| 0 | ||
 TME | R75GI368050H6J | KEMET Corporation | Capacitor: polypropylene; R75; 680nF; 160VDC; 90VAC; 18x13x12mm RoHS : Compliant |
| 446 | |
| ATS-X50375G-C1-R0 | Advanced Thermal Solutions Inc | Heatsink: extruded; grilled; BGA; blue; L: 37.5mm; W: 37.5mm; 2.8°C/W RoHS : Compliant |
| 23 | ||
| PCM 100/75 G | FIBOX | Enclosure: multipurpose; X: 80mm; Y: 130mm; Z: 75mm; MNX; grey; IK08 |
| 6 | ||
| R75GR510050H0J | KEMET Corporation | Capacitor: polypropylene; R75; 10uF; 160VDC; 90VAC; 32x22x37mm; THT RoHS : Compliant |
| 0 | ||
| BZT52B75-G3-18 | Vishay Intertechnologies | Diode: Zener; 0.5W; 75V; SMD; SOD123; single diode; 13 inch reel RoHS : Compliant |
| 0 | ||
| 6375G1 | Anderson Power Products | Connector: wire-wire; power supply; blue RoHS : Compliant |
| 0 | ||
| BZY97C75GP AMP | Fagor Electrónica | Diode: Zener; 1.5W; 75V; DO204AL,DO41; single diode; Ammo Pack |
| 0 | ||
| ATS-X53375G-C1-R0 | Advanced Thermal Solutions Inc | Heatsink: extruded; grilled; BGA; blue; L: 37.5mm; W: 37.5mm; 5°C/W RoHS : Compliant |
| 0 | ||
| GQM1875G2E2R7WB12D | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 2.7pF; 250V; X8G; ±0.05pF; SMD; 0603; 180mm RoHS : Compliant |
| 0 | ||
| GQM1875G2E4R3CB12D | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 4.3pF; 250V; X8G; ±0.25pF; SMD; 0603; 180mm RoHS : Compliant |
| 0 | ||
| GQM1875G2E6R2BB12D | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 6.2pF; 250V; X8G; ±0.1pF; SMD; 0603; 180mm RoHS : Compliant |
| 0 | ||
| GQM1875G2E8R7CB12D | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 8.7pF; 250V; X8G; ±0.25pF; SMD; 0603; 180mm RoHS : Compliant |
| 0 | ||
| GQM1875G2E9R0WB12D | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 9pF; 250V; X8G; ±0.05pF; SMD; 0603; 180mm RoHS : Compliant |
| 0 | ||
| HF-A-7,5GHZ-ATSMA14/HF/AL | Ingun Prufmittelbau GmbH | Absorber mat RF; 10÷60°C; 546x292x195mm; HF-A; 7.5GHz |
| 0 | ||
| LTPL-G35UVC275GS | Lite-On Semiconductor Corporation | LED; UV; 120°; 60mA; 274nm; 5.5VDC; SMD RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | BU52075GWZ-E2 | ROHM Semiconductor | 两极检测（极性判别输出）霍尔IC RoHS : Compliant |
| 6,000 | |
| BD45E275G-MTR | ROHM Semiconductor | 延迟时间固定型 电压检测器 RoHS : Compliant |
| 300 | ||
| BD45E475G-MTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
BD46275G-TR | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
| BD45275G-TR | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
 ComSIT USA | 74LVC1G175GV | NXP Semiconductors | SINGLE D-TYPE FLIP-FLOP WITH RESET; POSITIVE-EDGE TRIGGER D Flip-Flop, LVC/LCX/Z Series, 1-Func, Positive Edge Triggered, 1-Bit, True Output, CMOS, PDSO6 RoHS : Compliant | 9,000 | ||
| MT48LC4M16A2TG75G | Micron Technology Inc | 64 MBIT: 1 MEG X 16 X 4 BANKS SDRAM Synchronous DRAM, 4MX16, 5.4ns, CMOS, PDSO54 RoHS : Not Compliant | 3,188 | |||
| 74AUP1G175GN132 | NXP Semiconductors | IC FF D-TYPE SNGL 1BIT 6XSON RoHS : Compliant | 2,675 | |||
| TLE4275G | Infineon Technologies AG | 5-VOLT LOW DROP FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 5V, 0.5V Dropout, BIPolar, PSSO5 RoHS : Compliant | 2,660 | |||
| CNY75GA | Vishay Intertechnologies | PHOTOTRANSISTOR OUTPUT, WITH BASE CONNECTION, OPTOCOUPLER Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Not Compliant | 2,580 | |||
| TZMB75GS08 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 75V V(Z), 2%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Compliant | 2,500 | |||
BTS775G | Infineon Technologies AG | TRILITHIC Brush DC Motor Controller, PDSO28 RoHS : Not Compliant | 935 | |||
| BSP75GTA | Zetex / Diodes Inc | 60V SELF-PROTECTED LOW-SIDE INTELLIFET MOSFET SWITCH Buffer/Inverter Based Peripheral Driver, 3A, PDSO4 RoHS : Compliant | 805 | |||
| 74AUP1G175GM115 | NXP Semiconductors | Flip Flop D-Type Pos-Edge 1-Element 6-Pin RoHS : Compliant | 605 | |||
| MT48LC4M16A275G | Micron Technology Inc | Electronic Component RoHS : Compliant | 604 | |||
| MT48LC16M8A2P75G | Micron Technology Inc | 128 MEGABIT: 4 MEG X 8 X 4 BANKS SDRAM Synchronous DRAM, 16MX8, 5.4ns, CMOS, PDSO54 RoHS : Not Compliant | 455 | |||
| MT48LC4M16A2P75G | Micron Technology Inc | 64 MBIT: 1 MEG X 16 X 4 BANKS SDRAM Synchronous DRAM, 4MX16, 5.4ns, CMOS, PDSO54 RoHS : Compliant | 280 | |||
| OP275GS | Analog Devices Inc | DUAL BIPOLAR/JFET, AUDIO OPERATIONAL AMPLIFIER Audio Amplifier, 1 Channel(s), 2 Func, Bipolar, PDSO8 RoHS : Not Compliant | 172 | |||
| TLE4675GATMA1 | Infineon Technologies AG | Fixed Positive LDO Regulator, 5V, 0.5V Dropout, BIPolar, PSSO5 RoHS : Compliant | 100 | |||
| UPD75G16HE | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 2 | |||
 Interstate Connecting Components | M83723/75G1624N | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET |
| 26 | |
| 004628175G0 | ITT Interconnect Solutions | 51602-16-09T240 | 0 | |||
| M83723/75G10026 L/C | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET |
| 0 | ||
| M83723/75G14046 L/C | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET |
| 0 | ||
| M83723/75G1407Y | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET |
| 0 | ||
| M83723/75G14127 L/C | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET |
| 0 | ||
| M83723/75G18086 L/C | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET |
| 0 | ||
| M83723/75G18149 | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET |
| 0 | ||
| M83723/75G1831N | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET |
| 0 | ||
| M83723/75G22559 | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET |
| 0 | ||
| M83723/75G10029 | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET |
| 0 | ||
| M83723/75G12128 L/C | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET |
| 0 | ||
| M83723/75G1415Y | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET |
| 0 | ||
| M83723/75G16249 L/C | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET |
| 0 | ||
| M83723/75G18148 | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET |
| 0 | ||
 PEI Genesis | AE83375G20397 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | |
| AE83375G24618 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83375G8986 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83375G14159 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83375G2025Y | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83375G20396 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83375G2232Y | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83375G24617 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83375G8039 | Aero-Electric Connector Inc |
| 0 | |||
| M83723/75G1624N | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/75G1831N | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/75G22559 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| AE83375G16249 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83375G18319 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| 1875G1 | Anderson Power Products |
| 0 | |||
 Powell Electronics | RF3-03-T-03-75-G | Adam Technologies Inc | RF SMB CONNECTOR RoHS : Compliant |
| 1,122 | |
| SBS75GWHT-BK | Anderson Power Products | SBS75G HSG/SP WHT |
| 330 | ||
| MMI-BR2-75-G-S | Adam Technologies Inc | MINI FAKRA RIGHT ANGLE PLUG, 4P UP SILVE RoHS : Compliant |
| 297 | ||
| SBS75GBLK-BK | Anderson Power Products | SBS75G HSG/SP BLK |
| 165 | ||
| 175G-NA | Hammond Manufacturing | 1.5KVA AUTO STEPDOWN N.AMER. RoHS : Compliant |
| 15 | ||
| M83723/75G20416 | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 7 | ||
| M83723/75G1831N | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 4 | ||
| RP17175G2 | CII Guardian | MIL/AERO RELAY RP17175G2 |
| 3 | ||
| MWDM2L-75GP-4K1-18B | Glenair Inc | MICRO D CONNECTOR RoHS : Compliant |
| 2 | ||
| M83723/75G0803N | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 1 | ||
| M83723/75G20287 | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 1 | ||
| M83723/75G20286 | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 1 | ||
| M83723/75G20417 | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 1 | ||
| M83723/75G20256 | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 1 | ||
 PUI | 8933-G150275GAACA04B | 1,050 | ||||
 Richardson RFPD | SI5332DD14675-GM1R | Skyworks Solutions Inc | Frequency Synthesis Clock Generator RoHS : Compliant | 0 | ||
| SI5342B-D12375-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 4 RoHS : Compliant | 0 | |||
| SI5344B-D13275-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 4 RoHS : Compliant | 0 | |||
| SI5345B-D06375-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
| SI5345B-D06575-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
| SI5395B-A13775-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
| ATS-X50375G-C1-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive BGA Angle SMD Aluminum 2.8C/W Bl RoHS : Compliant |
| 0 | ||
| APT75GN60BDQ2G | Microchip Technology Inc | Trans IGBT Chip N-CH 600V 155A 536W 3-Pin(3+Tab) T RoHS : Compliant |
| 0 | ||
| ATS-X53375G-C1-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive BGA ExtrudedClip Aluminum 5°C/W RoHS : Compliant |
| 0 | ||
| SI5335B-B01575-GMR | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 200MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| SI5335B-B06475-GMR | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 200MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| SI5338C-B04275-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 200MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| SI5342A-D08575-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| SI5395A-A11675-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| OM75G5E-R58 | Ohmite Mfg Co | Res Carbon Film 7.5 Ohm 5% 1W ±350ppm/C Ceramic AX RoHS : Compliant |
| 0 | ||
 Rutronik | TZMC75-GS08 | Vishay Intertechnologies | Z-DIODE 0,5W 75V 5% MINIMELF RoHS : Compliant |
| 62,500 | |
| TZMC75-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 75V 5% MINIMELF RoHS : Compliant |
| 20,000 | ||
| LTPL-G35UVC275GZ | Lite-On Semiconductor Corporation | UVC LED 275NM 47mW 350mA 120° RoHS : Compliant |
| 401 | ||
| LTPL-G35UV275GR-E | Lite-On Semiconductor Corporation | UVC LED 275NM 21mW 150mA 120° RoHS : Compliant |
| 228 | ||
| CNY75GB | Vishay Intertechnologies | OPTOCOUPLER 100-200% WIDEBODY RoHS : Compliant |
| 100 | ||
| LTPL-G35UVC275GH | Lite-On Semiconductor Corporation | UVC LED 275NM 80mW 350mA 120° RoHS : Compliant |
| 72 | ||
 Chip 1 Exchange | MT48LC8M16A2P-75:G | Micron Technology Inc | INSTOCK RoHS : Compliant | 15,685 | ||
| BSP75GTA | INSTOCK | 3,644 | ||||
| TNY275G | POWER | INSTOCK | 2,780 | |||
| CNY75GA | INSTOCK | 2,700 | ||||
| TLE4275G | INSTOCK | 1,673 | ||||
| S07K275GS3 | INSTOCK | 986 | ||||
| TLE4275G | Infineon Technologies AG | INSTOCK RoHS : Compliant | 896 | |||
| OP275GSZ-REEL7 | Analog Devices Inc | INSTOCK RoHS : Compliant | 454 | |||
PCT2075GVX | NXP Semiconductors | INSTOCK RoHS : Compliant | 326 | |||
| PMI0P275GP | INSTOCK | 60 | ||||
| MT48LC8M16A2P-75:G | INSTOCK | 44 | ||||
| MT48LC8M8A2P-75:G | Microchip Technology Inc | INSTOCK | 33 | |||
| MT48LC8M8A2P-75:G | Micron Technology Inc | INSTOCK RoHS : Compliant | 33 | |||
| UCC5628AFQP-75:G | Microchip Technology Inc | INSTOCK | 10 | |||
| 74AUP1G175GW;125 | NXP Semiconductors | INSTOCK | 8 | |||
 Avnet Abacus | LQW2UASR75G00L | Murata Manufacturing Co Ltd | (Alt: LQW2UASR75G00L) RoHS : Compliant | 2,000 | ||
| 75GF31004030J | KEMET Corporation | (Alt: R75GF31004030J) RoHS : Compliant | 1,800 | |||
| R75GI410050H0J | KEMET Corporation | Power Film Capacitor Metallized PP Radial Box 2 Pin 1 uF 5 Through Hole 90 V 160 V (Alt: R75GI410050H0J) RoHS : Compliant | 500 | |||
| 75GR51004000J | KEMET Corporation | (Alt: R75GR51004000J) RoHS : Compliant | 112 | |||
| 73L2R75G | CTS Corporation | SMD Current Sense Resistor 750 Milliohm 2 100 mW 0603 1608 Metric Thick Film - Tape and Reel (Alt: 73L2R75G) RoHS : Compliant | 0 | |||
| 73L7R75G | CTS Corporation | SMD Current Sense Resistor 750 Milliohm 2 1 W 2512 6432 Metric Thick Film - Tape and Reel (Alt: 73L7R75G) RoHS : Compliant | 0 | |||
| 75GI32204000J | KEMET Corporation | (Alt: R75GI32204000J) RoHS : Compliant | 0 | |||
| R75GI368050H6J | KEMET Corporation | Power Film Capacitor Metallized PP Radial Box 2 Pin 068 uF 5 Through Hole 90 V 160 V (Alt: R75GI368050H6J) RoHS : Compliant | 0 | |||
| R75GR510050H0J | KEMET Corporation | Power Film Capacitor Metallized PP Radial Box 2 Pin 10 uF 5 Through Hole 90 V 160 V (Alt: R75GR510050H0J) RoHS : Compliant | 0 | |||
| R75GF3180AA00J | KEMET Corporation | Power Film Capacitor Metallized PP Radial Box 2 Pin 018 uF 5 Through Hole 90 V 160 V (Alt: R75GF3180AA00J) RoHS : Compliant | 0 | |||
| R75GI3220DQ00K | KEMET Corporation | Power Film Capacitor Metallized PP Radial Box 2 Pin 022 uF 10 Through Hole 90 V 160 V (Alt: R75GI3220DQ00K) RoHS : Compliant | 0 | |||
| R75GN4150AA00J | KEMET Corporation | Power Film Capacitor 15 uF 90 V 160 V 5 Metallized PP Radial Box 2 Pin Through Hole (Alt: R75GN4150AA00J) RoHS : Compliant | 0 | |||
| GQM1875G2E2R7WB12D | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 27 pF 250 V 0603 1608 Metric 005pF X8G GQM Series (Alt: GQM1875G2E2R7WB12D) RoHS : Not Compliant | 0 | |||
| GQM1875G2E8R0BB12D | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 8 pF 250 V 0603 1608 Metric 01pF X8G GQM Series 16 mm (Alt: GQM1875G2E8R0BB12D) RoHS : Compliant | 0 | |||
| IHLP7575GZER3R3M51 | Vishay Intertechnologies | - Tape and Reel (Alt: IHLP7575GZER3R3M51) RoHS : Compliant | 0 | |||
Avnet Asia | 74AUP1G175GS,132 | Nexperia | Flip Flop, 74AUP1G175, D, 5.7 ns, 615 MHz, 4 mA, 6 Pins, XSON (Alt: 74AUP1G175GS,132) RoHS : Compliant | 10,000 | ||
| GQM1875G2E6R2BB12D | Murata Manufacturing Co Ltd | (Alt: GQM1875G2E6R2BB12D) RoHS : Compliant | 0 | |||
| TNY275GN-TL | Power Integrations | Off Line Switcher 7-Pin SMD-C T/R (Alt: TNY275GN-TL) RoHS : Compliant | 0 | |||
| UMPS-02-07.5-G-V-S-TR | Samtec Inc | 2.00 mm mPOWER Ultra Micro Power Socket (Alt: UMPS-02-07.5-G-V-S-TR) RoHS : Compliant | 0 | |||
| GQM1875G2E120JB12D | Murata Manufacturing Co Ltd | (Alt: GQM1875G2E120JB12D) RoHS : Compliant | 0 | |||
| GQM1875G2E1R0BB12D | Murata Manufacturing Co Ltd | (Alt: GQM1875G2E1R0BB12D) RoHS : Compliant | 0 | |||
| NGCL1206UV1R575G3TRF | NIC Components Corp | (Alt: NGCL1206UV1R575G3TRF) RoHS : Compliant | 0 | |||
| UMPT-06-07.5-G-V-S-TR | Samtec Inc | (Alt: UMPT-06-07.5-G-V-S-TR) RoHS : Compliant | 0 | |||
| UMPT-06-07.5-G-V-S-W-TR | Samtec Inc | 2.00 mm mPOWER Ultra Micro Power Terminal, V (Alt: UMPT-06-07.5-G-V-S-W-TR) RoHS : Compliant | 0 | |||
| KFGZ03-18-A75G50A | Amphenol Corporation | AHLKFGZ03-18-A75G50A OSFP224 OVERPASS 1X (Alt: KFGZ03-18-A75G50A) RoHS : Compliant | 0 | |||
| 74LVC1G175GW,125 | Nexperia | Flip-Flop, Non Inverted, Positive Edge, 74LVC1G175, D, 300 MHz, 50 mA, SC-88 (Alt: 74LVC1G175GW,125) RoHS : Compliant |
| 0 | ||
| LSRNJ12575GL220MMY | TAIYO YUDEN | Inductor Power Shielded Wirewound 22uH 20% 100kHz Ferrite 4.05A SMD Emboss T/R (Alt: LSRNJ12575GL220MMY) RoHS : Compliant | 0 | |||
| UMPT-02-07.5-G-V-S-W-TR | Samtec Inc | (Alt: UMPT-02-07.5-G-V-S-W-TR) RoHS : Compliant | 0 | |||
| GQM1875G2E200GB12D | Murata Manufacturing Co Ltd | (Alt: GQM1875G2E200GB12D) RoHS : Compliant | 0 | |||
| UMPS-06-07.5-G-V-S-TR | Samtec Inc | 2.00 mm mPOWER Ultra Micro Power Socket (Alt: UMPS-06-07.5-G-V-S-TR) RoHS : Compliant | 0 | |||
 Avnet Silica | 74LVC1G175GW-Q100H | Nexperia | Flip Flop 74LVC1G175 D 55 ns 300 MHz 32 mA 6 Pins TSSOP (Alt: 74LVC1G175GW-Q100H) RoHS : Compliant | 423,000 | ||
| 74LVC1G175GW,125 | Nexperia | FlipFlop Non Inverted Positive Edge 74LVC1G175 D 300 MHz 50 mA SC88 (Alt: 74LVC1G175GW,125) RoHS : Compliant | 198,000 | |||
| 74LVC1G175GM,132 | Nexperia | Flip Flop 74LVC1G175 D 55 ns 300 MHz 32 mA 6 Pins XSON (Alt: 74LVC1G175GM,132) RoHS : Compliant | 20,000 | |||
74LVC1G175GV,125 | Nexperia | FlipFlop Non Inverted Positive Edge 74LVC1G175 D 300 MHz 50 mA SC74 (Alt: 74LVC1G175GV,125) RoHS : Compliant | 15,000 | |||
74AUP1G175GN,132 | Nexperia | Flip Flop 74AUP1G175 D 57 ns 615 MHz 4 mA 6 Pins XSON (Alt: 74AUP1G175GN,132) RoHS : Compliant | 5,000 | |||
| 74AUP1G175GW-Q100H | Nexperia | Flip Flop 74AUP1G175 D 57 ns 615 MHz 4 mA 6 Pins TSSOP (Alt: 74AUP1G175GW-Q100H) RoHS : Compliant | 3,000 | |||
| SCT011H75G3AG | STMicroelectronics | Silicon Carbide MOSFET Single N Channel 110 A 750 V 0015 ohm H2PAK (Alt: SCT011H75G3AG) RoHS : Compliant | 1,000 | |||
| SCT060HU75G3AG | STMicroelectronics | Automotivegrade silicon carbide Power MOSFET 750V 30A (Alt: SCT060HU75G3AG) RoHS : Compliant | 600 | |||
| BSP75GTA | Diodes Incorporated | (Alt: BSP75GTA) RoHS : Compliant | 0 | |||
| MP175GS-Z | Monolithic Power Systems | (Alt: MP175GS-Z) RoHS : Compliant | 0 | |||
| MP5075GTF-P | Monolithic Power Systems | (Alt: MP5075GTF-P) RoHS : Compliant | 0 | |||
| APT75GT120JU2 | Microchip Technology Inc | (Alt: APT75GT120JU2) RoHS : Compliant | 0 | |||
| BU52075GWZ-E2 | ROHM Semiconductor | (Alt: BU52075GWZ-E2) RoHS : Compliant | 0 | |||
| 74LVC1G175GF,132 | Nexperia | Flip Flop 74LVC1G175 D 55 ns 300 MHz 32 mA 6 Pins XSON (Alt: 74LVC1G175GF,132) RoHS : Compliant | 0 | |||
| IS31CS8975-GRLS2-TR | Lumissil Microsystems | MCU with 1KB SRAM and 16Kx16 ECC EFlash (Alt: IS31CS8975-GRLS2-TR) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AISC-Q1008-R75G-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AISC-0603-R0075G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R75G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q0805-R75G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | LTG-0375G | Lite-On Semiconductor Corporation | IN STOCK SHIP TODAY | 296 | ||
| MT48LC8M16A2P-75:G | Micron Technology Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 125 | ||
| OP275GP | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 102 | ||
| NBNB75GLP9 | Neutrik USA Inc | IN STOCK SHIP TODAY |
| 81 | ||
| OP275GS | PMI | IN STOCK SHIP TODAY |
| 65 | ||
| 8136-475G23 | IN STOCK SHIP TODAY |
| 52 | |||
| RE75G5R00 | Ohmite Mfg Co | IN STOCK SHIP TODAY |
| 22 | ||
| MT48LC8M8A2P-75-G | Micron Technology Inc | IN STOCK SHIP TODAY | 9 | |||
| CU4032K275G2K1 | TDK Electronics | IN STOCK SHIP TODAY RoHS : Unknown |
| 5 | ||
| MG10-375G4 | IN STOCK SHIP TODAY | 4 | ||||
| 3075-GR005 | Alpha Wire | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | 2775GM | Heyco | DP 1750 BLACK AB94620369 | 0 | ||
 EBV Elektronik | TZMB75-GS08 | Vishay Intertechnologies | (Alt: TZMB75-GS08) RoHS : Compliant | 60,000 | ||
| TNY275GN-TL | Power Integrations | (Alt: TNY275GN-TL) RoHS : Compliant | 58,000 | |||
| TZMC75-GS08 | Vishay Intertechnologies | (Alt: TZMC75-GS08) RoHS : Compliant | 57,500 | |||
| CNY75GA | Vishay Intertechnologies | DIP6 CPL WBASE 400mil 63125 CTR e3 (Alt: CNY75GA) RoHS : Compliant | 0 | |||
| NJW4175GM1 | Nisshinbo Micro Devices | LDO Voltage Regulators (Alt: NJW4175GM1) RoHS : Compliant | 0 | |||
| TZMC75-GS18 | Vishay Intertechnologies | (Alt: TZMC75-GS18) RoHS : Compliant | 0 | |||
| TLE4675GATMA1 | Infineon Technologies AG | Fixed LDO Voltage Regulator AECQ100 55 V to 45 V 250 mV Dropout 5 V400 mA out TO2635 (Alt: SP000315009) RoHS : Compliant | 0 | |||
| C10975_GT4-WW | LEDIL | GT4 Lens With Transparent Color (Alt: C10975_GT4-WW) RoHS : Compliant | 0 | |||
| AZ23B75-G3-08 | Vishay Intertechnologies | (Alt: AZ23B75-G3-08) RoHS : Compliant | 0 | |||
| BZX84C75-G3-08 | Vishay Intertechnologies | (Alt: BZX84C75-G3-08) RoHS : Compliant | 0 | |||
| AFT05MP075GNR1 | NXP Semiconductors | Transistor RF FET NCH 40V 136MHz to 520MHz 4Pin TO270WBG TR (Alt: AFT05MP075GNR1) RoHS : Compliant | 0 | |||
| APT75GN120JDQ3 | Microchip Technology Inc | (Alt: APT75GN120JDQ3) RoHS : Compliant | 0 | |||
| BZX384B75-G3-08 | Vishay Intertechnologies | ZENER DIODE SOD323 (Alt: BZX384B75-G3-08) RoHS : Compliant | 0 | |||
| IS31CS8975-GRLS2-TR | Lumissil Microsystems | MCU with 1KB SRAM and 16Kx16 ECC EFlash (Alt: IS31CS8975-GRLS2-TR) RoHS : Compliant | 0 | |||
| IS32CS8975-GRLA3-TR | Lumissil Microsystems | MCU with 1KB SRAM and 16Kx16 ECC EFlash (Alt: IS32CS8975-GRLA3-TR) RoHS : Compliant | 0 | |||
 FDH Electronics | M83723/75G1006N-LC | Aero-Electric Connector Inc | Connector 83723 RoHS : Not Compliant |
| 110 | |
| M83723/75G2041N-LC | Aero-Electric Connector Inc | Connector 83723 |
| 57 | ||
| M83723/75G1831N | Aero-Electric Connector Inc | Connector 83723 RoHS : Not Compliant |
| 53 | ||
| M83723/75G1814N | Aero-Electric Connector Inc | Connector 83723 RoHS : Not Compliant |
| 53 | ||
| M83723/75G1814N-LC | Aero-Electric Connector Inc | Connector 83723 |
| 53 | ||
| M83723/75G1831N-LC | Aero-Electric Connector Inc | Connector 83723 |
| 53 | ||
| M83723/75G2016N | Aero-Electric Connector Inc | Connector 83723 RoHS : Not Compliant |
| 50 | ||
| M83723/75G1002N-LC | Aero-Electric Connector Inc | Connector 83723 |
| 50 | ||
| M83723/75G1020N-LC | Aero-Electric Connector Inc | Connector 83723 |
| 33 | ||
| M83723/75G14156 | Amphenol Aerospace | Connector 83723 | 12 | |||
| RE75G1R00 | TTI, Inc | Other Products | 5 | |||
| M83723/75G1808N | Aero-Electric Connector Inc | Connector 83723 RoHS : Not Compliant |
| 3 | ||
| RP17175G2 | TE Connectivity | Relays |
| 0 | ||
| 89075GULSR | Amphenol Positronic | Rectangular Con |
| 0 | ||
| RJFTV75GF459 | Amphenol PCD | Connector |
| 0 | ||
 Maritex | 74AUP1G175GW,125 | Nexperia | Flip Flops; 74AUP1G175GW,125; NEXPERIA; 6; 50 MHz RoHS : Compliant |
| 2,089 | |
| U74LVC1G175G-AG6-R | Unisonic Technologies Co Ltd | Flip Flops; U74LVC1G175G-AG6-R; UTC |
| 1,246 | ||
| OP275GSZ-REEL7 | Analog Devices Inc | Multimedia Amplifiers; OP275GSZ-REEL7; ANALOG DEVICES; 8; 2 RoHS : Compliant |
| 96 | ||
| C10975_GT4-WW | LEDIL | Lens for LED high power; angle: 38 to 59 degrees FWHM; Number of LEDs: 4; Dimensions: round 35mm; Height: 9mm; meterial: PMMA; Fastening: glue; pin |
| 54 | ||
 Pasternack Enterprises US | PE3C8875/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8875/GR, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8875/GR is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax. | 255 | ||
| PE3C8875/GY | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8875/GY, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8875/GY is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GY coax. | 255 | |||
| PE3C8875/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GR-12, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GR-12 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax. |
| 51 | ||
| PE3C8875/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GR-300, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GR-300 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax. |
| 51 | ||
| PE3C8875/GR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GR-36, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GR-36 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax. |
| 51 | ||
| PE3C8875/GY-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GY-72, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GY-72 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax. |
| 51 | ||
| PE3C8875/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GR-72, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GR-72 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax. |
| 51 | ||
| PE3C8875/GY-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GY-12, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GY-12 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax. |
| 51 | ||
| PE3C8875/GY-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GY coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GY-120, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GY-120 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GY coax. |
| 51 | ||
| PE3C8875/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GR-120, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GR-120 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax. |
| 51 | ||
| PE3C8875/GY-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GY coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GY-300, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GY-300 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GY coax. |
| 51 | ||
| PE3C8875/GY-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GY-36, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GY-36 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax. |
| 51 | ||
| PEW75GG01 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-75, Flange Designation: UG, Material: Conductive Silicone Rubber. WR-75 Waveguide Gasket For UG Square Grooved Flanges, Conductive Silicone Elastomer. This conductive gasket is designed to connect two waveguide flanges using stainless steel screws and washers. The PEW75GG01 gasket is specifically made for WR-75 UG Grooved waveguide flanges. The gasket itself is made of Conductive Silicone Rubber, providing a durable and flexible seal. Pasternack has waveguide gaskets (both conductive and non-conductive), screws and other accessories that you need for your waveguides. Often people can forget to order items like screws or waveguide supports. Pasternack has a full line of waveguide accessories available for same day shipment so that you do not have to wait for weeks to get your system working. |
| 3 | ||
 Venkel Ltd. | MEHF0204-ZK-4R75GT | VENKEL LTD | High Frequency MELF;0204;2/5W;�100PPM;4.75R�2% RoHS : Not Compliant | 0 | ||
| MEHF0204-TK-4R75GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�100PPM;4.75R�2% RoHS : Not Compliant | 0 | |||
| WRFI0805-S-R75GT | VENKEL LTD | Wirewound RF Inductor;0805;750nH;�2% RoHS : Not Compliant | 0 | |||
| WRFI1008-S-R75GT | VENKEL LTD | Wirewound RF Inductor;1008;750nH;�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-ZC-4R75GT | VENKEL LTD | High Frequency MELF;0204;2/5W;�50PPM;4.75R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-TC-4R75GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�50PPM;4.75R�2% RoHS : Not Compliant | 0 | |||
 Vyrian | 74AUP1G175GS | Nexperia | D Flip-Flop, AUP/ULP/V Series, 1-Func, Positive Edge Triggered, 1-Bit, True Output, CMOS, PDSO6 RoHS : Compliant | 12,797 | ||
| MAX9275GTN-V-GG6 | Analog Devices (Maxim Integrated) | 10,178 | ||||
SMJ55166-75GB | Texas Instruments | Video DRAM, 256KX16, 75ns, CMOS, CPGA68 | 8,155 | |||
| BD675G | onsemi | Power Bipolar Transistor, 4A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon, TO-225AA, Plastic/Epoxy, 3 Pin RoHS : Compliant | 7,551 | |||
| APT75GN60BDQ2G | Microchip Technology Inc | Insulated Gate Bipolar Transistor, 100A I(C), 600V V(BR)CES, N-Channel, TO-247 RoHS : Compliant | 7,157 | |||
MT48LC4M16A2B4-75:G | Micron Technology Inc | Synchronous DRAM, 4MX16, 5.4ns, CMOS, PBGA54 RoHS : Compliant | 7,138 | |||
| MAX9275GTN+T | Analog Devices Inc | Line Driver RoHS : Compliant | 6,502 | |||
| DS2775G+T&R | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel RoHS : Compliant | 6,192 | |||
| DS2775G | Analog Devices (Maxim Integrated) | 6,125 | ||||
MT48LC16M8A2FB-75:G | Micron Technology Inc | Synchronous DRAM, 16MX8, 5.4ns, CMOS, PBGA60 RoHS : Not Compliant | 5,217 | |||
REG1117-5G4 | Texas Instruments | Fixed Positive LDO Regulator, 5V, 1.2V Dropout, BIPolar, PDSO4 RoHS : Compliant | 5,065 | |||
| MT48LC16M8A2F4-75:GAIT | Micron Technology Inc | Synchronous DRAM | 4,827 | |||
| MT48LC16M8A2F4-75:G | Micron Technology Inc | Synchronous DRAM, 16MX8, 5.4ns, CMOS, PBGA54 | 4,088 | |||
| MT48LC16M8A2B4-75:G | Micron Technology Inc | Synchronous DRAM, 16MX8, 5.4ns, CMOS, PBGA54 | 2,859 | |||
| SK75GD12T4TP | SEMIKRON | Insulated Gate Bipolar Transistor, 87A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant | 703 | |||
 Win Source Electronics | MP175GS-Z | Monolithic Power Systems | 700V, NON-ISOLATED, OFFLINE REGU RoHS : Compliant |
| 350,000 | |
| 74LVC1G175GW-Q100 | Nexperia | Flip Flops RoHS : Compliant |
| 132,000 | ||
| JS28F128J3F75G | Micron Technology Inc | 128Mb J3 Parallel NOR Flash |
| 31,710 | ||
| OP275GS | Analog Devices Inc | IC OPAMP AUDIO 9MHZ 8SOIC RoHS : Not Compliant |
| 30,000 | ||
| OP275GSZ-REEL | Analog Devices Inc | IC OPAMP AUDIO 9MHZ 8SOIC RoHS : Compliant |
| 27,920 | ||
| TLE4275G | Infineon Technologies AG | FIXED POSITIVE LDO REGULATOR RoHS : Compliant |
| 18,996 | ||
| MP4575GF-Z | Monolithic Power Systems | IC REG BUCK ADJ 5A 20TSSOP RoHS : Compliant |
| 18,090 | ||
| TNY275GN-TL | Power Integrations | IC OFFLINE SWIT OVP OTP HV 8SMD RoHS : Compliant |
| 18,000 | ||
| PCT2075GVX | Nexperia | IC SENSOR TEMP I2C/SMBUS 6TSOP |
| 15,563 | ||
| BSP75GTA | Diodes Incorporated | MOSFET N-CH 60V 1.6A SOT223 RoHS : Compliant |
| 12,100 | ||
| MT48LC16M8A2P-75:G | Micron Technology Inc | IC DRAM 128M PARALLEL 54TSOP RoHS : Compliant |
| 9,000 | ||
| MAX9275GTN/V+T | Maxim Integrated Products | LVDS Serializer 3120Mbps Automotive 56-Pin TQFN EP T/R | IC SERIALIZER 3.12GBPS 56TQFN RoHS : Compliant |
| 4,570 | ||
| MT48LC8M16A2P-75:G | Micron Technology Inc | IC SDRAM 128MBIT 133MHZ 54TSOP RoHS : Compliant |
| 3,000 | ||
| MT48LC4M16A2P-75:G TR | Micron Technology Inc | IC SDRAM 64MBIT 133MHZ 54TSOP |
| 2,123 | ||
| MP2975GU-0000-Z | Monolithic Power Systems |
| 19 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
German ▼ 
English
Chinese
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand