| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty.
BuyNow |
Pasternack Enterprises US | PE3C8008-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Male Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly SMA male to SMA male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low PIM SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C8008-12, can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C8008-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components. | 1 : $62.99
25 : $59.84
50 : $56.69
100 : $54.17
|
| 174
 |
PE3C8001-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Female Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male to N female low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N female low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8001-24 can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.808-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8001-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8001-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8001-24 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. | 1 : $74.99
25 : $71.24
50 : $67.49
100 : $64.49
|
| 34
|
PE3C8004-100CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. NEX10 Male to NEX10 Male Right Angle Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. NEX10 male to NEX10 male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom NEX10 to NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with NEX10 cable connection on one end and right angle NEX10 cable connection on the other. Our low PIM NEX10 to right angle NEX10 cable assemblies have a male gender on end 1 and male on end 2. This NEX10 to NEX10 cable is a male to male coax assembly, PE3C8004-100CM, can also be known as a low PIM NEX10 plug to right angle NEX10 plug cable assembly and will be shipped same-day as it is purchased. NEX10 plug to NEX10 plug cable assembly PE3C8004-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to right angle NEX10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency low PIM NEX10 male to NEX10 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8004-100CM can also be used in the other direction and will be right angle NEX10 male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this NEX10 male to NEX10 male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components. | 1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15
|
| 22
|
PE3C8005-24
| Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 24 inches. QMA Male to QMA Male Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly QMA male to QMA male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QMA male to QMA male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with QMA cable connection on one end and QMA cable connection on the other. Our low PIM QMA to QMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to QMA cable is a male to male coax assembly, PE3C8005-24, can also be known as a low PIM QMA plug to QMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA plug cable assembly PE3C8005-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible QMA cable assembly is manufactured with QMA to QMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM QMA male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM QMA plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male to QMA male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components. | 1 : $68.99
25 : $65.54
50 : $62.09
100 : $59.33
|
| 20
|
PE6800
| Pasternack Enterprises | Key Specifications, Maximum Power: 0.5 Watt, Waveguide Size: WR-28, Minimum Frequency: 26.5 GHz, Maximum Frequency: 40 GHz, Impedance: 50 Ohm. 0.5 Watts Low Power WR-28 Waveguide Load 26.5 GHz to 40 GHz. PE6800 0.5 Watts low power waveguide load (also known as waveguide termination) has a WR-28 input. This Pasternack WR-28 waveguide load / termination is rated for a minimum frequency of 26.5 GHz and a maximum frequency of 40 GHz. Our WR-28 waveguide terminator has a maximum input power of 0.5 Watts. WR-28 waveguide load / termination PE6800 has an average maximum VSWR of 1.3:1. This Pasternack WR-28 low power waveguide termination / load is part of over 40,000 in-stock RF, microwave and millimeter wave components. Our WR-28 load ships same day as purchased worldwide as with our other RF parts. | 1 : $665.0
10 : $638.4
25 : $611.8
|
| 12
|
PE3C8003-200CM
| Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. NEX10 Male to NEX10 Male Low PIM Cable 200 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-200CM can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-200CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75
|
| 11
|
PE70A8002
| Pasternack Enterprises | Key Specifications, Design: Relay Controlled, Maximum Frequency: 2 GHz, Impedance: 50 Ohm, Power Maximum: 0.5 Watt, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 63.75 dB, Switching Time: 6,000,000 ns. 8 Bit Relay Controlled Programmable Attenuator, 63.75 dB Up to 2 GHz, 0.25 dB Steps, +12V, SMA Female. PE70A8002 is a programmable attenuator from Pasternack. Our SMA attenuator is a programmable step attenuator design. This 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack programmable attenuator has a female gender for connector 1 and a SMA female for connector 2. PE70A8002 programmable step attenuator has a minimum attenuation of 0 dB and a maximum attenuation of 63.75 dB with 8dB step sizes. Our programmable RF attenuator has frequency range of DC to 2 GHz and a maximum VSWR of 0. This adjustable SMA attenuator is rated to 0.5 Watt at the stated attenuation. Our attenuator PE70A8002 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This RF programmable attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $2,380.0
5 : $2,284.8
10 : $2,189.6
|
| 3
|
PE70A8008
| Pasternack Enterprises | Key Specifications, Design: Relay Controlled, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Series 2: 2.92mm, Connector Gender 2: Female, Switching Time: 200 ns. TTL Controlled Programmable Attenuator, 31 dB, from 100 MHz to 40 GHz, 1 dB Steps, 2.92mm Female. PE70A8008 is a programmable attenuator from Pasternack. Our 2.92mm attenuator is a programmable step attenuator design. This 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack programmable attenuator has a female gender for connector 1 and a 2.92mm female for connector 2. PE70A8008 programmable step attenuator has a minimum attenuation of 0 dB and a maximum attenuation of 0 dB with 0dB step sizes. Our programmable RF attenuator has frequency range of 100 MHz to 40 GHz and a maximum VSWR of 0. This adjustable SMA attenuator is rated to 0 Watt at the stated attenuation. Our attenuator PE70A8008 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This RF programmable attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $7,520.0
5 : $7,219.2
10 : $6,918.4
25 : $6,617.6
|
| 3
|
PE71S8009
| Pasternack Enterprises | Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Absorptive, Minimum Frequency: 20 MHz, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Maximum Input Power: 20 Watts, Maximum Input VSWR: 1.8:1, Maximum Insertion Loss: 2.5 dB, Minimum Isolation: 55 dB. Absorptive SPDT PIN Diode Swtich Operating from 20 MHz to 6 GHz up to +26 dBm Hot Switching and SMA. PE71S8009 PIN diode switch from Pasternack is a Absorptive design. Our RF Absorptive PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Absorptive switch has a minimum frequency of 20 MHz and a maximum frequency of 6 GHz. The Pasternack PIN diode Absorptive RF switch is rated at a switching speed of ns and a maximum input power of 20 Watts (+43 dBm ). Insertion loss maximum of this SMA Absorptive switch is 2.5 dB with an isolation minimum of 55 dB. Absorptive PIN diode radio frequency switch PE71S8009 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Absorptive SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts. | 1 : $1,710.0
5 : $1,641.6
10 : $1,573.2
25 : $1,504.8
|
| 2
|
PE44800
| Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: 1.85mm, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 65 GHz, Interface Type 1: PE-047SR, Interface Type 2: PE-SR047AL, Interface Type 3: PE-SR047FL. 1.85mm Female Precision Connector Clamp/Solder Attachment for PE-047SR, PE-SR047AL, PE-SR047FL. PE44800 1.85mm female coaxial connector has an interface type of PE-047SR, PE-SR047AL, PE-SR047FL and a 50 Ohm impedance. Pasternack 1.85mm female connector uses shield/contact clamp/solder as an attachment method. Our female 1.85mm coaxial connector provides a minimum frequency of DC and a maximum frequency of 65 GHz. The Pasternack 1.85mm coaxial connector has a passivated stainless steel body. Our PE44800 1.85mm connector uses beryllium copper contact. This 1.85mm female coaxial RF connector is RoHS and REACH compliant. This Pasternack female 1.85mm connector will ship the same day as purchased. Our 1.85mm female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 1.85mm connector cable assemblies that will ship the same day as well. | 1 : $259.99
10 : $249.59
25 : $239.19
|
| 2
|
PE35800LF
| Pasternack Enterprises | | | 0
|
PE3W08800LF/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using LMR-600-DB Coax with HeatShrink, LF Solder. PE3W08800LF/HS is a N male to N male right angle cable using LMR-600-DB coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08800LF/HS N male to N male right angle cable assembly is constructed with LMR-600-DB coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3W15800
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. N Male to SMA Male Right Angle Cable Using PE-SR405FLJ Coax. PE3W15800 is a N male to SMA male right angle cable using PE-SR405FLJ coax. This Pasternack N male to SMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male SMA right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W15800 N male to SMA male right angle cable assembly is constructed with PE-SR405FLJ coax. | | 0
|
PE3W02800/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Right Angle Cable Using LMR-400 Coax with HeatShrink. PE3W02800/HS is a SMA male to TNC male right angle cable using LMR-400 coax. This Pasternack SMA male to TNC male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02800/HS SMA male to TNC male right angle cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3W20800
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMB Plug Cable Using PE-P086HF Coax. PE3W20800 is a SMA male right angle to SMB plug cable using PE-P086HF coax. This Pasternack SMA male right angle to SMB plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. SMA right angle to SMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20800 SMA male right angle to SMB plug cable assembly is constructed with PE-P086HF coax. | | 0
|
Venkel Ltd. | MELFC0102-UZ-2800BT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�15PPM;280R;�0.1%
RoHS : Compliant | | 0
|
MELFC0204-TN-6800BT
| VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�10PPM;680R;�0.1%
RoHS : Compliant | | 0
|
MELFC0204-TP-1800CT
| VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�5PPM;180R;�0.25%
RoHS : Compliant | | 0
|
MELFC0207-VK-2800FT
| VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�100PPM;280R;�1%
RoHS : Compliant | | 0
|
MELFC0207-XE-2800FT
| VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�25PPM;280R;�1%
RoHS : Compliant | | 0
|
CR1206-8W-6800DT
| VENKEL LTD | Chip Resistor;1206;1/8W;680R;�0.5%
RoHS : Compliant | | 0
|
CRG0603-Q-1800FT
| VENKEL LTD | RoHS 10/10 Green CR;0603;1/10W;180R;�1%
RoHS : Compliant | | 0
|
HPTF0603-QN-2800AT
| VENKEL LTD | High Power Thin Film CR;0603;1/10W;�10PPM;280R;�0.05%
RoHS : Compliant | | 0
|
HPTF0603-SE-6800FT
| VENKEL LTD | High Power Thin Film CR;0603;1/6W;�25PPM;680R;�1%
RoHS : Compliant | | 0
|
HPTF0805-RC-6800AT
| VENKEL LTD | High Power Thin Film CR;0805;1/8W;�50PPM;680R;�0.05%
RoHS : Compliant | | 0
|
HPTF1206-TP-1800AT
| VENKEL LTD | High Power Thin Film CR;1206;1/4W;�5PPM;180R;�0.05%
RoHS : Compliant | | 0
|
HPTF1210-UP-2800BT
| VENKEL LTD | High Power Thin Film CR;1210;1/3W;�5PPM;280R;�0.1%
RoHS : Compliant | | 0
|
HPTF2010-UP-1800DT
| VENKEL LTD | High Power Thin Film CR;2010;1/3W;�5PPM;180R;�0.5%
RoHS : Compliant | | 0
|
HPTF2512-WC-1800FT
| VENKEL LTD | High Power Thin Film CR;2512;3/4W;�50PPM;180R;�1%
RoHS : Compliant | | 0
|
HPTF2512-WC-6800AT
| VENKEL LTD | High Power Thin Film CR;2512;3/4W;�50PPM;680R;�0.05%
RoHS : Compliant | | 0
|
Waytek, Inc. | 19038-0013
| Molex | 16-14 GA .180 Female Bullet Connector Blue Nylon Insulation
RoHS : Compliant | 50 : $0.1901
200 : $0.1728
500 : $0.1673
1,000 : $0.1604
5,000 : $0.1531
|
| 25,617
|
35138800
| Aptiv PLC | Aptiv OCS 1.5 Series Female Terminal 20-22 Ga, Reel (2,800 pcs = 1 Reel) | 2,800 : $0.0358
14,000 : $0.0348
|
| 16,800
|
35138800
| Aptiv PLC | Aptiv OCS 1.5 Series Female Termianl 20-22 Ga, Loose | 100 : $0.1223
200 : $0.0944
500 : $0.0864
1,000 : $0.0793
5,000 : $0.0731
|
| 3,800
|
380-08811
| Carling Technologies | Black Knurled Dress Face Nut 15/32" Threads FOR TOGGLE SWITCHES | 10 : $0.6213
50 : $0.5999
100 : $0.5827
200 : $0.5784
500 : $0.5699
1,000 : $0.5613
|
| 816
|
380-08606
| Carling Technologies | Standard Black Hex Nut for Toggle Switches 15/32" THREADS | 25 : $0.6011
50 : $0.5351
100 : $0.4849
200 : $0.4691
500 : $0.4531
1,000 : $0.4372
|
| 189
|
1800-E1-1-2E-0200-12
| MP | 20A Circuit Breaker 32V ABYC UL Panel Mount Manual Reset UL 1500 SAE J1428 120VAC | 1 : $20.49
5 : $18.3
10 : $17.11
50 : $16.11
100 : $15.37
200 : $14.64
|
| 148
|
8007K23N313V22
| Eaton Electronics | Eaton 8007K23N313V22 Euro SR rocker switch is a sealed illuminated SPST On-Off switch with a 14VDC lamp and snap-in mounting. It uses 0.250" spade terminals, a black rocker, and Euro SR construction for rugged vehicle and equipment panels. | 1 : $11.58
10 : $11.16
50 : $10.79
100 : $10.25
200 : $9.89
500 : $9.53
|
| 143
|
122A08-00M-KA
| Eaton Electronics | ShortStop Circuit Breaker 8A Metal Keps Nuts Type 2 BUSSMANN TYPE II | 1 : $4.5432
50 : $3.7605
100 : $3.2833
200 : $3.0924
500 : $2.9586
|
| 102
|
1800-E1-1-2E-0400-12
| MP | 40A Circuit Breaker 32V ABYC UL Panel Mount Manual Reset UL 1500 SAE J1428 120VAC | 1 : $20.49
5 : $18.3
10 : $17.11
50 : $16.11
100 : $15.37
200 : $14.64
|
| 96
|
8006K32N1V2
| Eaton Electronics | Eaton 8006K32N1V2 Euro SR rocker switch is a sealed, non-illuminated SPDT switch with momentary (On)-Off-(On) action. It features snap-in mounting, 0.250" spade terminals, a black two-face rocker, and moisture-resistant Euro SR construction. | 1 : $15.6162
10 : $13.9487
50 : $12.7871
100 : $12.4081
200 : $12.0174
500 : $11.6373
|
| 26
|
8007K43N313V32
| Eaton Electronics | Eaton 8007K43N313V32 Euro SR rocker switch is a sealed illuminated DPST On-Off switch with snap-in mounting and 0.250" spade terminals. It features a black rocker, one green lens, 14VDC lamp configuration, and rugged Euro SR construction for vehicle panels. | 1 : $14.92
10 : $14.31
50 : $13.86
100 : $13.15
200 : $12.7
500 : $12.26
|
| 24
|
880076
| Littelfuse Inc | Littelfuse 880076-SL PDM Fuse Block with Control Knob Switch (Supplier DISCO) | 1 : $258.8
5 : $248.48
10 : $238.19
25 : $224.02
|
| 10
|
624 1668 0 01
| Rennsteig Tools Inc | FCI,Apex 2.8 Crimp Die Locator 20-14GA Male Terminals | | 7
|
12-110-1800-B4M
| Eaton Electronics | 1800W True Sine Inverter with 40A Battery Charger UL 458 CSA | 1 : $1,126.6
5 : $1,075.92
10 : $1,031.54
|
| 3
|
19M-P10-B-080-02
| MP | 80A Series 19 Circuit Breaker Type 3 Manual Reset Button Sensata Klixon SDLM-80 | 1 : $37.19
5 : $33.61
10 : $31.66
50 : $30.05
100 : $28.74
200 : $27.45
|
| 0
|
Win Source Electronics | BTA16-800BWRG
 | STMicroelectronics | TRIAC ALTERNISTOR 800V TO220AB
RoHS : Compliant | 610 : $0.4925
460 : $0.5493
355 : $0.5682
260 : $0.5872
165 : $0.6061
70 : $0.7387
|
| 100,000
|
503480-0800
| Molex |
RoHS : Compliant | 2,455 : $0.1222
1,835 : $0.1363
1,420 : $0.141
1,030 : $0.1457
665 : $0.1504
275 : $0.1832
|
| 59,633
|
5034800800
| Molex | CONN FFC FPC 8POS 0.5MM R/A
RoHS : Compliant | 2,455 : $0.1222
1,835 : $0.1363
1,420 : $0.141
1,030 : $0.1457
665 : $0.1504
275 : $0.1832
|
| 59,633
|
BTA140-800
| Nexperia | Triacs | 335 : $1.0063
270 : $1.0482
210 : $1.0902
145 : $1.174
95 : $1.216
45 : $1.2998
|
| 43,393
|
DRV8800RTYR
 | Texas Instruments | Full Bridge Motor Driver 32V 16-Pin WQFN EP T/R / IC MOTOR DRIVER PAR 16QFN
RoHS : Compliant | 232 : $1.4502
186 : $1.5091
143 : $1.568
100 : $1.6859
65 : $1.7448
31 : $1.8628
|
| 30,000
|
BTA41-800B
| STMicroelectronics | TRIAC 800V 40A TOP3
RoHS : Compliant | 125 : $2.4132
93 : $2.6916
72 : $2.7844
53 : $2.8772
34 : $2.97
14 : $3.6197
|
| 27,842
|
DMG4800LSD
| Diodes Incorporated | DUAL N-CHANNEL ENHANCEMENT MODE MOSFET | 1,085 : $0.2775
870 : $0.2888
670 : $0.3
465 : $0.3226
300 : $0.3339
145 : $0.3564
|
| 22,000
|
NB3W800LMNTWG
| onsemi | IC CLOCK ZDB FANOUT BUFFER 48QFN
RoHS : Compliant | 75 : $4.5236
60 : $4.7074
46 : $4.8913
32 : $5.2591
21 : $5.443
10 : $5.8107
|
| 19,020
|
F280025PMSR
 | Texas Instruments | C2000 32-BIT MCU WITH 100-MHZ, F
RoHS : Compliant | 138 : $2.1896
103 : $2.4422
80 : $2.5264
58 : $2.6106
38 : $2.6948
16 : $3.2843
|
| 18,000
|
AD8007ARZ
 | Analog Devices Inc | IC OPAMP CFA 650MHZ 8SOIC
RoHS : Compliant | 226 : $1.7236
169 : $1.9225
131 : $1.9888
95 : $2.055
61 : $2.1213
26 : $2.5854
|
| 9,000
|
F280025CPTSR
 | Texas Instruments | IC MCU 32BIT 128KB FLASH 48LQFP
RoHS : Compliant | 78 : $3.8677
58 : $4.314
45 : $4.4627
33 : $4.6115
22 : $4.7603
9 : $5.8015
|
| 6,800
|
BGU8007
| Nexperia | The best reception of GNSS signals with the smallest footprint | 1,110 : $0.3503
830 : $0.3909
640 : $0.4043
465 : $0.4178
305 : $0.4312
125 : $0.5255
|
| 2,448
|
IS45S16800F-7BLA2-TR
| Integrated Silicon Solution Inc | IC DRAM 128MBIT PAR 54TFBGA / SDRAM Memory IC 128Mbit Parallel 143 MHz 5.4 ns 54-TFBGA (8x8)
RoHS : Compliant | 31 : $10.8657
24 : $12.1194
18 : $12.5374
13 : $12.9553
9 : $13.3731
4 : $16.2986
|
| 1,750
|
LFCN-800D+
| Mini-Circuits | LTCC LOW PASS FILTER, DC - 800 M
RoHS : Compliant | 90 : $3.369
67 : $3.7577
52 : $3.8873
38 : $4.0169
25 : $4.1465
10 : $5.0535
|
| 1,000
|
HCPL-7800A-300E
| Broadcom Limited | IC OPAMP ISOLATION 100KHZ 8DIPGW
RoHS : Compliant | 23 : $13.299
17 : $14.8334
14 : $15.3449
10 : $15.8564
7 : $16.3679
3 : $19.9484
|
| 857
|
Wuhan P&S | 10098678-002C-TRLF
| Amphenol FCi | SAS:29 Position Right Angle SM Plug
RoHS : Compliant | 1 : $2.0
100 : $1.93
500 : $1.88
1,000 : $1.85
|
| 600
|
German ▼ 
English
Chinese
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand