822-CEAC-R7 Price, Verteiler, Stock

Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMC Plug Right Angle to SMC Jack Bulkhead Cable 24 Inch Length Using RG400 Coax., Radio frequency assembly SMC plug right angle to SMC jack bulkhead cable 24 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug right angle to SMC jack bulkhead cable 24 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMC cable connection on one end and SMC bulkhead cable connection on the other. Our right angle SMC to SMC cable assemblies have a plug gender on end 1 and jack on end 2. This SMC to SMC cable is a plug to jack coax assembly, PE34482-24, can also be known as a right angle SMC male to SMC female cable assembly and will be shipped same-day as it is purchased. SMC male to SMC female cable assembly PE34482-24 is built with RG400 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with right angle SMC to SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMC right angle plug to SMC jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34482-24 can also be used in the other direction and will be SMC jack bulkhead to right angle SMC plug cable assembly if the opposite connectivity is required. SMC right angle male to SMC female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug right angle to SMC jack bulkhead cable 24 inch length using RG400 coax.

1 : $125.99
25 : $119.69
50 : $113.39
100 : $108.35

154

PE8225

Pasternack Enterprises

Key Specifications, Block Type: Inner, Impedance: 50 Ohm, Connector In Series: 2.92mm, Connector In Gender: Male, Connector Out Series: 2.92mm, Connector Out Gender: Female, Minimum Frequency: 10 MHz, Maximum Frequency: 40 GHz, Maximum VSWR: 1.45:1. DC Block on Inner Conductor 50 Ohm 2.92mm Male to 2.92mm Female Operating From 10 MHz to 40 GHz. PE8225 is a coaxial RF DC block is from Pasternack and has an 50 Ohm impedance. Our 50 Ohm DC block is manufactured with a 2.92mm input and 2.92mm output. This 2.92mm DC block is an inner direct current block type. Pasternack inner 2.92mm DC block is rated for a minimum frequency of 10 MHz and a maximum frequency of 40 GHz. PE8225 2.92mm inner DC block has a maximum insertion loss of 0.75 dB and a maximum VSWR of 1.45:1. This inner 2.92mm RF direct current block is just one of over 40,000 components for RF, microwave and millimeter wave applications supplied by Pasternack. Our coaxial DC block with 2.92mm connectors is available to buy and be shipped globally the same day as with Pasternack's other RF parts in stock.

1 : $1,120.0
5 : $1,075.2
10 : $1,030.4

152

PE3W08482-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. Fire Rated 4.1/9.5 Mini DIN Female Bulkhead to 4.3-10 Female 4 Hole Flange Low Pim Cable 200 Cm Length Using SPF-250 Coax., Radio frequency assembly fire rated 4.1/9.5 mini DIN female bulkhead to 4.3-10 female 4 hole flange low pim cable 200 cm length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Fire rated 4.1/9.5 mini DIN female bulkhead to 4.3-10 female 4 hole flange low pim cable 200 cm length using SPF-250 coax, 4.1/9.5 mini DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN bulkhead cable connection on one end and 4.3-10 4 hole flange cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a female gender on end 1 and female on end 2. PE3W08482-200CM can also be known as a low PIM 4.1/9.5 mini DIN jack to 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN jack to 4.3-10 jack cable assembly PE3W08482-200CM is built with SPF-250 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN female bulkhead to 4.3-10 female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08482-200CM can also be used in the other direction and will be 4.3-10 female 4 hole flange to 4.1/9.5 mini DIN female bulkhead cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN jack bulkhead to 4.3-10 jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 4.1/9.5 mini DIN female bulkhead to 4.3-10 female 4 hole flange low pim cable 200 cm length using SPF-250 coax.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

PE8224

Pasternack Enterprises

Key Specifications, Block Type: Inner/Outer, Impedance: 50 Ohm, Connector In Series: 2.92mm, Connector In Gender: Male, Connector Out Series: 2.92mm, Connector Out Gender: Female, Minimum Frequency: 10 MHz, Maximum Frequency: 26.5 GHz, Maximum VSWR: 1.35:1. DC Block on Inner and Outer Conductor 50 Ohm 2.92mm Male to 2.92mm Female Operating From 10 MHz to 26.5 GHz. PE8224 is a coaxial RF DC block is from Pasternack and has an 50 Ohm impedance. Our 50 Ohm DC block is manufactured with a 2.92mm input and 2.92mm output. This 2.92mm DC block is an inner/outer direct current block type. Pasternack inner/outer 2.92mm DC block is rated for a minimum frequency of 10 MHz and a maximum frequency of 26.5 GHz. PE8224 2.92mm inner/outer DC block has a maximum insertion loss of 0.75 dB and a maximum VSWR of 1.35:1. This inner/outer 2.92mm RF direct current block is just one of over 40,000 components for RF, microwave and millimeter wave applications supplied by Pasternack. Our coaxial DC block with 2.92mm connectors is available to buy and be shipped globally the same day as with Pasternack's other RF parts in stock.

1 : $860.0
10 : $825.6
25 : $791.2

PE3282-24

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male to Mini UHF Male Cable 24 Inch Length Using RG58 Coax., Radio frequency assembly N male to mini UHF male cable 24 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to mini UHF male cable 24 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to mini UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and mini UHF cable connection on the other. Our N type to mini UHF cable assemblies have a male gender on end 1 and male on end 2. This type N to mini UHF cable is a male to male coax assembly, PE3282-24, can also be known as a type N plug to mini UHF plug cable assembly and will be shipped same-day as it is purchased. N type plug to mini UHF plug cable assembly PE3282-24 is built with RG58 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to mini UHF cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2.5 GHz maximum frequency type N male to mini UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3282-24 can also be used in the other direction and will be mini UHF male to type N male cable assembly if the opposite connectivity is required. Type N plug to mini UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to mini UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to mini UHF male cable 24 inch length using RG58 coax.

1 : $57.99
25 : $55.09
50 : $52.19
100 : $49.87

PE34582-24

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 24 inches. 3.5mm Male to 3.5mm Female Cable 24 Inch Length Using RG405 Coax., Radio frequency assembly 3.5mm male to 3.5mm female cable 24 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm male to 3.5mm female cable 24 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and 3.5mm cable connection on the other. Our 3.5mm to 3.5mm cable assemblies have a male gender on end 1 and female on end 2. This 3.5mm to 3.5mm cable is a male to female coax assembly, PE34582-24, can also be known as a 3.5mm plug to 3.5mm jack cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to 3.5mm jack cable assembly PE34582-24 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3.5mm male to 3.5mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34582-24 can also be used in the other direction and will be 3.5mm female to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to 3.5mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm male to 3.5mm female cable 24 inch length using RG405 coax.

1 : $349.99
25 : $332.49
50 : $314.99

PE3C3382-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. MCX Plug Right Angle to BNC Male Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly MCX plug right angle to BNC male cable 24 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to BNC male cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle MCX cable connection on one end and BNC cable connection on the other. Our right angle MCX to BNC cable assembly has plug gender on end 1 and male on end 2. PE3C3382-24 can also be known as a right angle MCX male to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. MCX male to BNC plug cable assembly PE3C3382-24 is built with RG316 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to BNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C3382-24 RF cable are available on our downloadable PDF datasheet.PE3C3382-24 can also be used in the other direction and will be BNC male to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to BNC cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX RF cable assembly as per your requirements.

1 : $68.99
25 : $65.54
50 : $62.09
100 : $59.33

PE3W08227LF

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. BNC Male to SHV Plug Cable Using RG174 Coax, LF Solder. PE3W08227LF is a BNC male to SHV plug cable using RG174 coax. This Pasternack BNC male to SHV plug cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SHV for connector 2. Our male BNC to plug SHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08227LF BNC male to SHV plug cable assembly is constructed with RG174 coax.

PE3C8222-12

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 12 inches. 4.1/9.5 Mini DIN Female to Snap-On 4.3-10 Male Low PIM Cable 12 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN female to snap-on 4.3-10 male low PIM cable 12 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN female to snap-on 4.3-10 male low PIM cable 12 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a female gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a female to male coax assembly, PE3C8222-12, can also be known as a low PIM 4.1/9.5 mini DIN jack to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN jack to 4.3-10 plug cable assembly PE3C8222-12 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN female to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8222-12 can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN female cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN jack to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN female to snap-on 4.3-10 male low PIM cable 12 inch length using TFT-402 coax using Times Microwave components.

1 : $74.99
25 : $71.24
50 : $67.49
100 : $64.49

PE3W08220

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female to QMA Male Right Angle Cable Using LMR-240-UF Coax. PE3W08220 is a reverse polarity TNC female to QMA male right angle cable using LMR-240-UF coax. This Pasternack reverse polarity TNC female to QMA male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm QMA for connector 2. TNC to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity female TNC to male QMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08220 TNC reverse polarity female to QMA male right angle cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C7582-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 24 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 24 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 24 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3C7582-24, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C7582-24 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance. RF specs on this 6 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7582-24 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 24 inch length using PE-SR402FLJ coax.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE3C8228-24

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 24 inches. 4.1/9.5 Mini DIN Male to Snap-On 4.3-10 Male Low PIM Cable 24 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 24 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 24 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to male coax assembly, PE3C8228-24, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly PE3C8228-24 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8228-24 can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 24 inch length using TFT-402 coax using Times Microwave components.

1 : $86.99
25 : $82.64
50 : $78.29
100 : $74.81

PE3W01822LF/HS

Pasternack Enterprises

PE3W08225/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. N Female Bulkhead to N Female Bulkhead Cable Using LMR-600 Coax with HeatShrink. PE3W08225/HS is a N female bulkhead to N female bulkhead cable using LMR-600 coax. This Pasternack N female bulkhead to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N bulkhead to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08225/HS N female bulkhead to N female bulkhead cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W08225LF

Pasternack Enterprises

TE Connectivity

171822-8

TE Connectivity

EIS REC. HSG 8P-NATURAL Number of Positions: 8 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Mating Retention Type: Locking Standard Rectangular Connector | 8 Receptacle Housing With | Part Number: 171822-8 | Internal Number: 171822-8 | TE Connectivity
RoHS : Compliant

1,000 : $0.42
500 : $0.43
250 : $0.44
100 : $0.46
50 : $0.47
1 : $0.51

16,447

42282-2

TE Connectivity

FF 250 REC 18-14AWG TPBR LP Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 18 – 14 AWG Wire Size: .82 – 2.08 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 18 – 14 AWG .82 – 2.08 mm² | Quick Disconnect | Part Number: 42282-2 | Internal Number: 42282-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.24
100 : $0.32
10 : $0.39
1 : $0.51

8,643

2-84982-2

TE Connectivity

1MM FFC SMT V ASSY 22P EMBOSS Centerline (Pitch): .039 in Centerline (Pitch): 1 mm Insertion Force Type: Non ZIF PCB Mount Orientation: Vertical Termination Method to PCB: Surface Mount 0.039" 1 mm Non ZIF Vertical | Fpc Connector | Part Number: 2-84982-2 | Internal Number: 2-84982-2 | .039" | TE Connectivity
RoHS : Compliant

1,000 : $1.0
500 : $1.03
250 : $1.06
100 : $1.1
50 : $1.13
1 : $1.24

5,522

3-794682-2

TE Connectivity

02P MICRO MNL ASSY,VRT,THRU,LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 2 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 2 | PCB Header & Receptacle | Part Number: 3-794682-2 | Internal Number: 3-794682-2 | TE Connectivity
RoHS : Compliant

1,000 : $1.29
100 : $1.73
10 : $2.14
1 : $2.7

1,424

1982257-5

TE Connectivity

Z-PACK Slim UHD Power 5 pos receptacle PCB Connector Type: PCB Mount Receptacle Number of Columns: 5 Backplane Architecture: Traditional Backplane Number of Positions: 5 Centerline (Pitch): .118 in PCB Mount Receptacle 5 Traditional Backplane | Hard Metric Backplane Connector | Part Number: 1982257-5 | Internal Number: 1982257-5 | .118" | TE Connectivity
RoHS : Compliant

500 : $14.07
250 : $14.63
100 : $15.51
60 : $16.13
50 : $16.45
25 : $17.38
10 : $18.73
1 : $22.03

962

2822395-1

TE Connectivity

070 ECONOSEAL MARK-2+ PLUG 10P Nominal Voltage Architecture: 12 V Number of Positions: 10 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Tab Width: 1.8 mm Automotive Housing | 12 V 10 Housing for Female Terminals Wire-to-Wire | Part Number: 2822395-1 | Internal Number: 2822395-1 | 1.8 mm | TE Connectivity
RoHS : Compliant

1,000 : $1.53
500 : $1.91
250 : $2.9
100 : $3.82
50 : $4.58

861

2-1735482-2

TE Connectivity

0.8FH,R17H.5,060,30/Sn,TR,SC PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 60 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 2-1735482-2 | Internal Number: 2-1735482-2 | TE Connectivity
RoHS : Compliant

1,000 : $8.79
500 : $9.04
250 : $9.32
100 : $9.64
50 : $9.92
1 : $10.88

745

2822343-1

TE Connectivity

MINI MLC PLUG HSG ASSY 7P Nominal Voltage Architecture: 12 V Number of Positions: 7 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Tab Width: 1 mm Multilock Connector Housing | 12 V 7 Housing for Female Terminals Wire-to-Wire | Part Number: 2822343-1 | Internal Number: 2822343-1 | 1 mm | TE Connectivity
RoHS : Compliant

1,000 : $1.09
500 : $1.37
250 : $2.08
100 : $2.73
50 : $3.28

634

5745182-2

TE Connectivity

09 PLUG SP/MS STD Number of Positions: 9 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Plug Board-to-Board Board Mount | Part Number: 5745182-2 | Internal Number: 5745182-2 | TE Connectivity
RoHS : Compliant

1,000 : $6.95
500 : $7.15
250 : $7.37
100 : $7.62
50 : $7.84
1 : $8.61

413

2337822-5

TE Connectivity

DISCR.ETH.MAG. 1GB SINGLE SMT POE Modular Jack Filter Type: Discrete Magnetic Filter Power over Ethernet Number of Loaded Positions: 24 Data Rate: 1 Gb/s Contact Mating Area Plating Material: Nickel (Ni) Contact Base Material: Phosphor Bronze Discrete Magnetic Filter Power over Ethernet 24 1 Gb/s Nickel (Ni) | Discr.eth.mag | Part Number: 2337822-5 | Internal Number: 2337822-5 | TE Connectivity
RoHS : Compliant

250 : $17.74
100 : $18.45
50 : $19.16
25 : $19.87
10 : $20.58
1 : $21.29

380

282822-4

TE Connectivity

TERMI-BLOK HEADER,ASSY90 4P. Number of Positions: 4 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .197 in Centerline (Pitch): 5 mm PCB Terminal Block | 4 Header Wire-to-Board .197" | Part Number: 282822-4 | Internal Number: 282822-4 | .197" | TE Connectivity
RoHS : Compliant

500 : $1.74
250 : $1.8
100 : $1.86
50 : $1.92
25 : $1.98
10 : $2.04
1 : $2.1

358

796382-2

TE Connectivity

R/A STRN RELIEF KIT,SZ 23,CPC Strain Relief Accessory Type: Cable Clamp Kit Primary Product Material: Thermoplastic Primary Product Color: Black Compatible With Connector Shell Size: 23 Shielded: No Cable Clamp Kit Thermoplastic Black 23 | Connector Strain Relief | Part Number: 796382-2 | Internal Number: 796382-2 | TE Connectivity
RoHS : Compliant

100 : $22.5
50 : $23.57
25 : $24.64
10 : $25.71
1 : $26.78

272

1318382-2

TE Connectivity

025 CAP HSG ASSY 16P PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 16 Number of Rows: 2 Centerline (Pitch): 2.2 mm Horizontal Wire-to-Board 16 2 | Signal Header | Part Number: 1318382-2 | Internal Number: 1318382-2 | 2.2 mm | TE Connectivity
RoHS : Compliant

2,500 : $0.87
1,000 : $1.09
500 : $1.31
250 : $1.66
100 : $2.18
50 : $2.62

258

2822638-1

TE Connectivity

070 ECONOSEAL MARK-2+ PLUG 12P Number of Positions: 12 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Tab Width: 1.8 mm Mating Tab Width: .07 in Econoseal & Connector Housing | 12 Housing for Female Terminals Wire-to-Wire 1.8 mm | Part Number: 2822638-1 | Internal Number: 2822638-1 | TE Connectivity
RoHS : Compliant

1,000 : $1.42
500 : $1.77
250 : $2.69
100 : $3.54
50 : $4.25

215

2405082-2

TE Connectivity

10 AHV D FP Ahv | Part Number: 2405082-2 | Internal Number: 2405082-2 | TE Connectivity
RoHS : Compliant

1 : $751.35

Venkel Ltd.

TFCR0805-8W-E-1822BT

VENKEL LTD

Thin Film CR;0805;1/8W;�25PPM;18.2K;�0.1%
RoHS : Compliant

10,000

SWCR0603-TK-822MT

VENKEL LTD

Surge Withstanding CR;0603;1/4W;�100PPM;8.2K;�20%
RoHS : Compliant

PWCR1210-XK-1822FT

VENKEL LTD

Pulse Withstanding CR;1210;1W;�100PPM;18.2K;�1%
RoHS : Compliant

TFCR0402-16W-E-1822DT

VENKEL LTD

Thin Film CR;0402;1/16W;�25PPM;18.2K;�0.5%
RoHS : Compliant

TFCR1206-8W-E-1822CT-1K

VENKEL LTD

Thin Film CR;1206;1/8W;�25PPM;18.2K;�0.25%
RoHS : Compliant

TFCR2010-4W-E-1822CT-1K

VENKEL LTD

Thin Film CR;2010;1/4W;�25PPM;18.2K;�0.25%
RoHS : Compliant

UPTF0805-10W-N-1822AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�10PPM;18.2K;�0.05%
RoHS : Compliant

UPTF2512-2W-P-1822DT

VENKEL LTD

Ultra Precision Thin Film CR;2512;1/2W;�5PPM;18.2K;�0.5%
RoHS : Compliant

MELFC0204-TN-1822BT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�10PPM;18.2K;�0.1%
RoHS : Compliant

C1206C0G500-822JNP

VENKEL LTD

Chip Capacitor;1206;C0G;50V;8200pF;�5%
RoHS : Compliant

C1206C0G500-822KNE

VENKEL LTD

Chip Capacitor;1206;C0G;50V;8200pF;�10%
RoHS : Compliant

MELFC0207-VC-1822FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�50PPM;18.2K;�1%
RoHS : Compliant

MELFC0207-VE-1822BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�25PPM;18.2K;�0.1%
RoHS : Compliant

MELFC0207-VZ-1822CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�15PPM;18.2K;�0.25%
RoHS : Compliant

MELFM0207-XC-1822BT

VENKEL LTD

MELF Molded Thin Film CR;0207;1W;�50PPM;18.2K;�0.1%
RoHS : Not Compliant

Waytek, Inc.

7100008223

3M IDC TERMINAL T-TAP BLUE 18 TO 14 GA MATE WITH 31512 OR 31712

50 : $0.2447
200 : $0.2316
500 : $0.2153
1,000 : $0.2065

86,372

HL8-22-14

NSPA

22-14GA Closed End Connector Clear / Blue Dashes, sealed up to four wires

10 : $0.933
50 : $0.8349
100 : $0.7572
200 : $0.7302
500 : $0.7065
1,000 : $0.6794

1,854

28225306710-L

Lear Corporation

Lear Mak8 Plus Female Terminal 6.0-10.0mm2 In Plated Reel 600/Reel

600 : $2.7099
3,000 : $2.7099

1,200

28224306710

Lear Corporation

Lear Mak8 Plus Female Terminal 2.5-4.0mm2 Tin Plated Reel 600/Reel

600 : $2.6599
3,000 : $2.6599

1,200

929822

TE Connectivity

TE Female Power Timer Terminal Socket 20-18ga Loose Piece

10 : $1.2062
50 : $1.0757
100 : $0.977
200 : $0.9452
500 : $0.9135
1,000 : $0.8782

1,147

28225306710-L

Lear Corporation

Lear Mak8 Plus Terminals 6.0-10.0 mm2 Tin Plated (Long Seal) Loose

1 : $4.2227
10 : $3.8329
50 : $3.5405
100 : $3.0695
200 : $2.8909
500 : $2.761

1,000

28224306710-L

Lear Corporation

Lear Mak8 Plus Terminals 2.5-4.0 mm2 Tin Plated (Long Seal) Loose

1 : $4.1457
10 : $3.763
50 : $3.476
100 : $3.0136
200 : $2.8382
500 : $2.7107

953

15326822

Aptiv PLC

5 Way Female Sealed GT 150 Connector DELPHI 15326822

1 : $1.7918
50 : $1.6088
100 : $1.4637
200 : $1.4132
500 : $1.3691
1,000 : $1.3186

547

82-2124

Grote Industries Inc

Grote 82-2124 recessed toggle switch plate is a replacement plate for Grote 82-2123 toggle switch assemblies. It supports SPST toggle switch layouts, comes in a pack quantity of 1, and is designed as a recessed plate accessory for panel-mounted switches.

1 : $4.0976
50 : $3.4311
100 : $2.992
200 : $2.813
500 : $2.6829

349

33482-2101

Molex

20 Circuit Dual Row MX150 Male Connector No CPA * Replaced 38416 *
RoHS : Compliant

1 : $2.4273
10 : $2.2051
50 : $2.0333
100 : $1.7707
200 : $1.6596
500 : $1.599

289

3298225.ZXM10

Littelfuse Inc

ZCASE MEGA Fuse 32V M10 225A
RoHS : Compliant

1 : $9.51
10 : $8.49
50 : $7.81
100 : $7.51
200 : $7.3
500 : $7.09

277