| Datenblatt-Suchmaschine für elektronische Bauteile |
|
8317 Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
![]() TME | 83170002 / 831700-I-W2 | Crouzet | Microswitch SNAP ACTION; 10A/250VAC; without lever; SPDT; Pos: 2 |
| 135 | |
| 968.317.2 | ANAMET Electrical Inc | M20; polyamide; PA6S; for braids,for conduit; Pitch: 1.5 |
| 36 | ||
| 8317 | Keystone Electronics Corp | Spacer sleeve; LEDs,LED; Øout: 5mm; ØLED: 5mm; L: 6.1mm; natural |
| 0 | ||
| 2831710000 | Weidmüller Interface GmbH & Co. KG | Comb bridge; black; wemid; 2.8mm RoHS : Compliant |
| 0 | ||
| 7000-89831-7910030 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; M8 male straight,M8 female straight RoHS : Compliant |
| 0 | ||
| 83170905 | Crouzet | Microswitch SNAP ACTION; 5A/250VAC; without lever; SPDT; ON-(ON) |
| 0 | ||
| 83170950 | Crouzet | Microswitch SNAP ACTION; 5A/250VAC; SPDT; ON-(ON); Pos: 2; IP40 |
| 0 | ||
| 7000-08831-7910500 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; M8 female; straight; 5m; plug; 60VDC RoHS : Compliant |
| 0 | ||
| 7000-89831-7910400 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; M8 male straight,M8 female straight RoHS : Compliant |
| 0 | ||
| 83170005 | Crouzet | Microswitch SNAP ACTION; 10A/250VAC; without lever; SPDT; Pos: 2 |
| 0 | ||
| 83170910 | Crouzet | Microswitch SNAP ACTION; 5A/250VAC; without lever; SPDT; ON-(ON) |
| 0 | ||
| 83170951 | Crouzet | Microswitch SNAP ACTION; 5A/250VAC; SPDT; ON-(ON); Pos: 2; IP40 |
| 0 | ||
HSE-B18317-035H-01![]() | Same Sky | Heatsink: extruded; H; TO218; black; L: 31.75mm; W: 41.6mm; H: 25mm RoHS : Compliant |
| 0 | ||
| HSS-118 317 175 A 0802 | Ingun Prufmittelbau GmbH | Test probe: high current; 5A; Ø: 1.75mm; HSS-118; CuBe; 0.8N; 10mΩ |
| 0 | ||
| HSS-118 317 200 A 3002 | Ingun Prufmittelbau GmbH | Test probe: high current; 20A; Ø: 2mm; HSS-118; CuBe; 3N; push-in |
| 0 | ||
![]() Verical | 831742AGILF | Integrated Device Technology Inc | 831742AGILF |
| 533,760 | |
| 831721AGILF | Integrated Device Technology Inc | Clock Multiplexer 1-OUT 2-IN 1:1 16-Pin TSSOP Tube RoHS : Compliant |
| 253,611 | ||
| 831700C1.0 | Crouzet | Switch Snap Action N.O./N.C. SPDT Button Quick Connect 10A 250VAC 250VDC 1.5N Screw Mount |
| 1,560 | ||
| 831704C1.0 | Crouzet | Switch Snap Action N.O./N.C. SPDT Button Quick Connect 5A 250VAC 250VDC 0.6N Screw Mount |
| 1,446 | ||
| 83170442 | Crouzet | High Precision Flexible Leaf Snap Action Mechanism |
| 837 | ||
| 831704C4.FL | Crouzet | Switch Snap Action N.O./N.C. SPDT Dummy Roller Lever PC Pins 5A 250VAC 250VDC Thru-Hole |
| 600 | ||
| 83170445 | Crouzet | 83170445 |
| 550 | ||
| 831708C2.0 | Crouzet | 831708C2.0 |
| 460 | ||
| 83170919 | Crouzet | Subminiature Micro Switch Mushroom-Head Button |
| 395 | ||
| 83170405 | Crouzet | Switch Snap Action N.O./N.C. SPDT Button 5A 250VAC 0.6N Screw Mount Quick Connect |
| 380 | ||
| 83170197 | Crouzet | 83170197 |
| 276 | ||
| 831700C3.0 | Crouzet | Switch Snap Action N.O./N.C. SPDT Button PC Pins 10A 250VAC 250VDC 1.5N Thru-Hole |
| 60 | ||
| 831704C2.ER | Crouzet | Switch Snap Action N.O./N.C. SPDT Roller Lever Solder Lug 5A 250VAC 250VDC Screw Mount |
| 30 | ||
| 8317077960 | ebm-papst | 8317077960 |
| 13 | ||
| 8317078857 | ebm-papst | 8317078857 |
| 12 | ||
![]() Avnet Americas | M24308/3-17P | ITT Interconnect Solutions | - Bulk (Alt: M24308/3-17P) RoHS : Not Compliant |
| 25 | |
| C18317_ADELIA-50-W | LEDIL | Reflector for COB Chip-On-Board Warm Dim Constant Current LED Modules 50mm 36Degree Wide Beam - Boxed Product (Development Kits) (Alt: C18317_ADELIA-50-W) RoHS : Compliant |
| 0 | ||
| 7010328317 | 3M Interconnect | FLEXIBLE DIAMOND QRS CLOTH DISC 6002J, M - Bulk (Alt: 7010328317) RoHS : Not Compliant |
| 0 | ||
| AER43432831725T | CTS Corporation | - Trays (Alt: AER43432831725T) RoHS : Compliant | 0 | |||
| 0031.8317 | Schurter Electronic Components | - Boxed Product (Development Kits) (Alt: 0031.8317) RoHS : Compliant |
| 0 | ||
| M83723/82S18317(LC) | Amphenol Corporation | - Bulk (Alt: M83723/82S18317(LC)) RoHS : Not Compliant |
| 0 | ||
| M83723/86A18317(LC) | Amphenol Corporation | - Bulk (Alt: M83723/86A18317(LC)) RoHS : Not Compliant |
| 0 | ||
| M83723/75A18317 | Amphenol Corporation | Circular Connector, MIL-DTL-83723 Series III, Straight Plug, 31 Contacts, Crimp Socket, Bayonet - Bulk (Alt: M83723/75A18317) RoHS : Not Compliant |
| 0 | ||
| M83723/75A18317 | Conesys | - Bulk (Alt: M83723/75A18317) RoHS : Not Compliant | 0 | |||
| 11-18-3170 | Molex | - Bulk (Alt: 0011183170) RoHS : Not Compliant |
| 0 | ||
| M83723/71R18317 | Conesys | - Bulk (Alt: M83723/71R18317) RoHS : Not Compliant | 0 | |||
| M83723/71R18317 | Amphenol Corporation | Circular Connector, MIL-DTL-83723 Series III, Wall Mount Receptacle, 31 Contacts, Crimp Socket, Gold - Bulk (Alt: M83723/71R18317) RoHS : Not Compliant |
| 0 | ||
| M83723/74W18317(LC) | Amphenol Corporation | - Bulk (Alt: M83723/74W18317(LC)) RoHS : Not Compliant |
| 0 | ||
| M83723/77Z18317 | Amphenol Corporation | - Bulk (Alt: M83723/77Z18317) RoHS : Not Compliant |
| 0 | ||
| M83723/83S18317(LC) | Amphenol Corporation | - Bulk (Alt: M83723/83S18317(LC)) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 83-17540BP | Mcm | |Mcm 83-17540BP RoHS : Compliant |
| 33,299 | |
AD8317ACPZ-R7![]() | Analog Devices Inc | Amp Log, 1Amplifiers, 55 Db, -22Mv/Db; |Analog Devices, Inc. AD8317ACPZ-R7 RoHS : Compliant |
| 4,748 | ||
AD8317ACPZ-R7![]() | Analog Devices Inc | Amp Log, 1Amplifiers, 55 Db, -22Mv/Db; |Analog Devices, Inc. AD8317ACPZ-R7 RoHS : Compliant |
| 4,748 | ||
| 83-17044 | SPC Multicomp | 40-Pin Gpio Breakout And Cable For Raspberry Pi; Product Range:Raspberry Pi Accessories; Accessory Type:Gpio Breakout For Raspberry Pi; For Use With:Raspberry Pi; Kit Contents:Board, Ribbon Cable Rohs Compliant: No |Multicomp Pro 83-17044 RoHS : Not Compliant |
| 1,914 | ||
| 83170408 | Crouzet | Microswitch, Top Plunger, Spdt,5A,250V; Microswitch Type:Subminiature; Microswitch Actuator:Plunger; Contact Configuration:Spdt; Switch Terminals:Solder; Contact Current Max:5A; Contact Voltage Dc Nom:-; Product Range:- Rohs Compliant: Yes RoHS : Compliant |
| 1,442 | ||
| 6648317-1 | TE Connectivity | Contact, Socket, 8Awg, Crimp; Connector Type:Contact, Crimp; Series:Elcon; For Use With:Iccon Single-Pole Power Connectors; Current Rating:35A; Contact Plating:Gold; Contact Material:Beryllium Copper; Contact Gender:Socket Rohs Compliant: Yes RoHS : Compliant |
| 993 | ||
| 1-178317-5 | TE Connectivity | Connector, Header, 8Pos, 1Row, 3.81Mm; |Te Connectivity Amp 1-178317-5 RoHS : Compliant |
| 856 | ||
| 83-17318 | Stellar labs (MCM Electronics) | Keyboard, Wireless, Usb, Mini; |Stellar Labs Computer Plus 83-17318 RoHS : Compliant |
| 745 | ||
| 83-17115 | SPC Multicomp | 4 Port Usb 3.0 Hub - Type C; No. Of Ports:4Ports; Hub Style:Bus Powered; Product Range:Usb Hub Rohs Compliant: Yes |Multicomp Pro 83-17115 RoHS : Compliant |
| 366 | ||
| 1378317 | Phoenix Contact | Connector Housing, Rcpt, 6Pos, 2.5Mm; |Phoenix Contact 1378317 RoHS : Compliant |
| 240 | ||
| 83-17330 | Stellar labs (MCM Electronics) | 3 Black Usb Reversible A Male To A Male Cable; Connector A:Usb Type A Plug (Reversible); Connector B:Usb Type A Plug (Reversible); Cable Length - Metric:914.4Mm; Cable Length - Imperial:3Ft; Usb Standard:-; Jacket Color:Black Rohs Compliant: Yes RoHS : Compliant |
| 136 | ||
| RTD-831-72-SE | Omega Engineering | Rtd-831-72-Se; |Omega RTD-831-72-SE RoHS : Compliant |
| 60 | ||
| 783174-01 | NI | Test Accessory, Active Gps Antenna; |Ni/emerson 783174-01 RoHS : Compliant |
| 4 | ||
| 83-17980 | macetech LLC | Case Plate, Raspberry Pi; Accessory Type:Chronopi Rtc Module; For Use With:Raspberry Pi Boards; Product Range:- Rohs Compliant: Yes |Macetech 83-17980 RoHS : Compliant |
| 1 | ||
| 8317 | Keystone Electronics Corp | Fasteners, Spacers/Standoffs Spacing Hei; |Keystone 8317 RoHS : Compliant |
| 0 | ||
![]() Analog Devices Inc | AD8317ACPZ-R7![]() | Analog Devices Inc | 8GHz Log Detector 50dB RoHS : Compliant |
| 2,861 | |
AD8317ACHIPS![]() | Analog Devices Inc | 8GHz Log Detector 50dB RoHS : Compliant |
| 2,224 | ||
AD8317ACPZ-WP![]() | Analog Devices Inc | 8GHz Log Detector 50dB RoHS : Compliant |
| 2,150 | ||
AD8317ACPZ-R2![]() | Analog Devices Inc | 8GHz Log Detector 50dB RoHS : Compliant |
| 1,750 | ||
| AD8317-EVALZ | Analog Devices Inc | Evaluation board for AD8317-Pb RoHS : Compliant |
| 0 | ||
![]() RS | 284583-1 (7180829) | TE Connectivity | QUADLOCK SYSTEM CAVITY PLUG FOR USE WITH POWER CONNECTOR |
| 2,013 | |
| 9309 (PR 083-173) | Heyco | SNAP RIVET, .17"X.20"PANEL THICKNESS, .083"HOLE DIA., WHITE |
| 1,000 | ||
| 9308 (PR 083-173) | Heyco | SNAP RIVET, .17"X.20"PANEL THICKNESS, .083"HOLE DIA., BLACK |
| 505 | ||
| 2518317 | RS Pro | 2.54MM PITCH 36 WAY 1 ROW SOLDER TERM. 36 WAY STRAIGHT PIN HEADER W81136 SERIES |
| 100 | ||
| 1831798 | RS Pro | 6 POLE FEMALE STRAIGHT MINIATURE DIN CONNECTOR MDR SERIES 100 VAC 1A |
| 35 | ||
| 2658317 | RS Pro | 1/4" HEX 3.0 H BIT (25MM) PACK 10 |
| 10 | ||
| 38.31.7.024.8240 | FINDER SpA | SSR INTERFACE MODULE, SPST-NO 3A, 24V DC INPUT, 12-240V AC OUTPUT |
| 10 | ||
| DSNU-25-60-PPV-A (1908317) | Festo | STANDARD CYLINDER, G 1/8 PORT, M10 ROD, 25MM PISTON, 60MM STROKE, DSNU SERIES |
| 10 | ||
| 84871122 (83170197) | Crouzet | RELAY, MONITOR, E-MECH, CUR-RTG 5A, CTRL-V 24-240AC/DC, VOL-RTG 250AC/DC, DIN RAIL MNT |
| 9 | ||
| 2338317 | RS Pro | M21 SP21 PANEL FRONT NUT MOUNT CONNECTOR MALE 5 PIN |
| 5 | ||
| A2D225R (B218317) | Mersen Electrical Power | FUSE, TIME DELAY, RK1, VISUAL INDICATOR, 200KA AC/100KA DC, 250VAC/DC, 225A |
| 5 | ||
| 48.31.7.024.0050.SPA | FINDER SpA | INTERFACE MODULE, SPDT 10A, 24V DC COIL, AGNI CONTACT, LED, DIODES, SCREW TERM |
| 5 | ||
| 1718317 | RS Pro | RUBBER, BOLT HOLE CASTOR DIA 125MM |
| 3 | ||
| 8317 | SKF | ANGULAR CONTACT BALL BEARING, I.D. 85 MM, O.D. 180 MM, W 82 MM |
| 0 | ||
| 8317 | Keystone Electronics Corp | SPACER; SELF-ALIGING; BI-LEAD; LENGTH .240; NYLON 6/6; FOR LED SIZE T-1-3/4 |
| 0 | ||
![]() Bisco Industries | 0038-3-17-27-30-29-02-0 | Mill-Max Mfg Corp | 1,211 | |||
| 0038-3-17-15-30-27-02-0 | Mill-Max Mfg Corp | RoHS : Compliant | 537 | |||
| 0038-3-17-01-30-14-02-0 | Mill-Max Mfg Corp | RoHS : Not Compliant | 350 | |||
| 08-317 | Avery Dennison Corporation | 245 | ||||
| 3BT-P8317-00 | Acumnet / Camcar | 184 | ||||
| 0038-3-17-01-30-27-02-0 | Mill-Max Mfg Corp | RoHS : Not Compliant | 123 | |||
| MS27183-17 | MS Washers | 33 | ||||
| 30848-317 | nVent Schroff | 20 | ||||
| M25988/3-171 | Military Specifications | 3 | ||||
![]() Future Electronics | 8317 | Keystone Electronics Corp | Natural Color Nylon 6.1 mm Long Self Aligning LED Spacer RoHS : Compliant |
| 0 | |
| 8317 | Heyco | RoHS : Compliant |
| 0 | ||
![]() Onlinecomponents.com | 020-8317-00 | TE Connectivity | 020-8317-00 RoHS : Compliant |
| 4 | |
| 8317 | Heyco | RoHS : Compliant |
| 0 | ||
| 39593-8317 | Molex | 5.0MM EUROBLOCK PC 45 GRN 11A 17CKT RoHS : Compliant |
| 0 | ||
| 8317-832-A | RAF Electronic Hardware | 7/16 X 9/32 OV X 2.00 LG X RoHS : Compliant |
| 0 | ||
| 39513-8317 | Molex | 3.81MM EURO PLUG VERT FWE GRN 10AV 17CKT RoHS : Compliant |
| 0 | ||
| 39517-8317 | Molex | 3.81MM EURO PLUG VERT ME FWE GRN 10AV 17 RoHS : Compliant |
| 0 | ||
| C115288-8317 | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| 39523-8317 | Molex | 5.0MM EURO PLUG VERT FWE GRN 10AV 17CKT RoHS : Compliant |
| 0 | ||
| 39537-8317 | Molex | 5.08MM EURO PLUG VERT ME FWE GRN 10AV 17 RoHS : Compliant |
| 0 | ||
| 39533-8317 | Molex | 5.08MM EURO PLUG VERT FWE GRN 10AV 17CKT RoHS : Compliant |
| 0 | ||
| 39543-8317 | Molex | 5.0MM EUROBLOCK PC 45 BLK 11A 17CKT RoHS : Compliant |
| 0 | ||
| 8317-632-A | RAF Electronic Hardware | RoHS : Compliant |
| 0 | ||
| 63800-8317 | Molex | ADJUSTMENT SCREW RoHS : Compliant |
| 0 | ||
| XN-4004-8317-0 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| 11-31-8317 | Molex | COVER TERMINAL RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | AD8317ACPZ-WP![]() | Analog Devices Inc | Special Purpose Amplifier Logarithmic Amplifier 1 CH 8-SON Waffle RoHS : Compliant |
| 15 | |
ADS8317IBDGKT![]() | Texas Instruments | IC ADC 1 CONV 16Bits SAR 3-Wire Serial, SPI 8-SOP T/R RoHS : Compliant |
| 150 | ||
ADS8317IBDRBT![]() | Texas Instruments | IC ADC 1 CONV 16Bits SAR 3-Wire Serial, SPI 8-SON T/R RoHS : Compliant |
| 9,588 | ||
ADS8317IDRBT![]() | Texas Instruments | IC ADC 1 CONV 16Bits SAR 3-Wire Serial, SPI 8-SON T/R RoHS : Compliant |
| 250 | ||
ADS8317IBDGKR![]() | Texas Instruments | IC VOL REF Shunt Fixed 3V 15mA ±0.2% SOT-23-3 T/R RoHS : Compliant |
| 67,003 | ||
ADS8317IBDRBR![]() | Texas Instruments | IC ADC 1 CONV 16Bits SAR 3-Wire Serial, SPI 8-SON T/R RoHS : Compliant |
| 25,200 | ||
ADS8317IDGKR![]() | Texas Instruments | IC ADC 1 CONV 16Bits SAR 3-Wire Serial, SPI 8-SOP T/R RoHS : Compliant |
| 28,641 | ||
| MV8317 | Fairchild Semiconductor Corporation | LED Yellow 1 LED Clear Radial RoHS : Not Compliant |
| 17,250 | ||
![]() Sager | 8317 | Keystone Electronics Corp | LED Mounting Hardware .24 T1 3/4 BI-LEAD .197 (5mm) DIA |
| 0 | |
| 7708317032 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 0831718 | Phoenix Contact | Labels & Industrial Warning Signs LS-EMLP (27X18) SR RoHS : Compliant |
| 0 | ||
| 1628317 | Phoenix Contact | Specialized Cables EV-T2M4CC-DC200A- 6,0M70ESBK00 RoHS : Compliant | 0 | |||
| 0039283173 | Molex | Molex | 0 | |||
| 468-31728-001 | Carling Technologies | Switch Actuators | 0 | |||
| 7708317027 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7708317072 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7708317108 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9858317056 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9858317100 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9858317137 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9858317009 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9858317054 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9858317135 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() ComSIT USA | CY28317PVC2T | Cypress Semiconductor | FTG FOR MOBILE VIA PL133T AND PLE133T CHIPSETS Processor Specific Clock Generator, 200MHz, CMOS, PDSO48 RoHS : Not Compliant | 700 | ||
| CY28317PVC2 | Cypress Semiconductor | FTG FOR MOBILE VIA PL133T AND PLE133T CHIPSETS Processor Specific Clock Generator, 200MHz, CMOS, PDSO48 RoHS : Not Compliant | 17 | |||
![]() Interstate Connecting Components | 8317 | Keystone Electronics Corp |
| 110 | ||
| 041783-1728 | ITT Interconnect Solutions | DPX2MA-40P-00P-34B-00-01 | 0 | |||
| 41833831700C03 | Amphenol PCD | RHINO | 0 | |||
| 48317-18T108 | ITT Interconnect Solutions | 48317-18T108 | 0 | |||
| 4.18338317E+20 | Amphenol PCD | RHINO | 0 | |||
| A83174-064 | TE Connectivity | TRAJ-24/1X70-150-3HL | 0 | |||
| 41833831700C02 | Amphenol PCD | RHINO | 0 | |||
| M83723/78R18317 L/C | Conesys | RFI PLUG, PIN, 83723 SIII BAYONET |
| 0 | ||
| M83723/84A18317 L/C | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII THREA |
| 0 | ||
| M83723/85R18317 L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII THREADED |
| 0 | ||
| M83723/75A18317 | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET |
| 0 | ||
| 041783-1733 | ITT Interconnect Solutions | DPX2ME-67S-67S-33B-00 | 0 | |||
| 2283170001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCRPS-1K-22-18/2.0-S3-4 RoHS : Compliant | 0 | |||
| M83723/71R18317 | Conesys | WALL MT RECEPT, SOCKET, 83723 SIII BAYON |
| 0 | ||
| M83723/85A18317 L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII THREADED |
| 0 | ||
![]() NexGen Digital | 831752AGILF | Integrated Device Technology Inc | RoHS : Compliant | 20 | ||
![]() PEI Genesis | M39029/48-317 | Amphenol Corporation |
| 0 | ||
![]() Powell Electronics | 1-178317-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 5,561 | |
| 1-178317-5 | TE Connectivity | Wire & Cable Management RoHS : Compliant |
| 2,944 | ||
| 368317-1 | TE Connectivity | TE COMPONENT (REF 368317-1) RoHS : Compliant |
| 2,848 | ||
| 1-178317-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1,877 | ||
| 44A9083-17-6 | TE Connectivity | Connectors RoHS : Compliant |
| 66 | ||
| M83723/95G18317 | Conesys | SELF LOCKING PLUG, SOCKET, 83723 SIII TH |
| 44 | ||
| M83723/96G18317 | Conesys | SELF LOCKING PLUG, PIN, 83723 SIII THREA |
| 44 | ||
| 08317821332 | Altech Corporation | Inductive Sensor KJ6-M12MN60-DNS-V2 |
| 8 | ||
| 08317822265 | Altech Corporation | Inductive Sensor KJ4-M12MN50-DPS-V2 |
| 3 | ||
| 020-8317-00 | TE Connectivity | DEUTSCH CONNECTOR 020-8317-00 |
| 3 | ||
| M83723/71W18317 | Conesys | WALL MT RECEPT, SOCKET, 83723 SIII BAYON |
| 2 | ||
| 08317802110 | Altech Corporation | Inductive Sensor KJ0,8-M5EB27-DNS |
| 2 | ||
| M83723/72W18317 | Conesys | WALL MT RECEPT, PIN, 83723 SIII BAYONET |
| 2 | ||
| 08317610465 | Altech Corporation | Inductive Sensor KJ2-M8MN50-DPS-V2 |
| 1 | ||
| 08317821002 | Altech Corporation | Inductive Sensor KJ4-M12MB50-DPS-X0409 |
| 1 | ||
![]() Richardson RFPD | AD8317ACPZ-R7![]() | Analog Devices Inc | RF Detector 1MHz to 10000MHz 12dBm 8-Pin LFCSP EP RoHS : Compliant |
| 364 | |
| 935311183178 | NXP Semiconductors | Trans RF FET N-CH 133V 5-Pin NI-1230S T/R RoHS : Compliant |
| 0 | ||
| SI5341B-D08317-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| R433831700 | Radiall | Conn SMA Coupler 12.4GHz to 18GHz 50Ohm RCP RoHS : Compliant | 0 | |||
| SI5341B-D08317-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| 5831-7501-000 | Radiall | Between Series Adapt RoHS : Not Compliant | 0 | |||
AD8317ACHIPS![]() | Analog Devices Inc | RF Detector 1MHz to 10000MHz 12dBm 10-Pin Die Tray RoHS : Compliant | 0 | |||
AD8317ACPZ-R2![]() | Analog Devices Inc | RF Detector 1MHz to 10000MHz 12dBm 8-Pin LFCSP EP RoHS : Compliant | 0 | |||
| AD8317-EVALZ | Analog Devices Inc | AD8317 Evaluation Board RoHS : Compliant |
| 0 | ||
| 1623831-7 | TE Connectivity | Res Cermet Trimmer 1K Ohm 10% 0.5W(1/2W) 1(Elec)/1 RoHS : Compliant | 0 | |||
![]() Rutronik | P/N8317 | Keystone Electronics Corp | LED SPACER MOUNT BI-LEAD RoHS : Compliant |
| 8,000 | |
| 48.31.7.024.0050 | FINDER SpA | Koppel 24DC 10A 1CO RoHS : Compliant |
| 100 | ||
| 48.31.7.012.0050 | FINDER SpA | Koppel 12DC 10A 1CO RoHS : Compliant |
| 50 | ||
![]() Chip 1 Exchange | 8317 | Keystone Electronics Corp | INSTOCK | 1,230 | ||
| MV8317.A4R0 | INSTOCK | 980 | ||||
| 183171-16016-3 | INSTOCK | 746 | ||||
| PNX8317HS/C102 | INSTOCK | 597 | ||||
| EP8317 | Amphenol PCD | INSTOCK | 50 | |||
| AD8317ACPZ | Analog Devices Inc | INSTOCK | 44 | |||
| EP8317 | INSTOCK | 28 | ||||
![]() Avnet Abacus | 368317-1 | TE Connectivity | Connector Accessory Clip AMP MQS Series Automotive Connector Housings MQS (Alt: 368317-1) RoHS : Compliant | 8,000 | ||
| 1831769 | Phoenix Contact | PC 5 7ST1762PA1357BDL1 PC57ST1762PA1357BDL1 (Alt: 1831769) RoHS : Compliant | 0 | |||
| 1798317 | Phoenix Contact | FRONT 25VSA 5EX2 RZBDT2 FRONT25VSA5EX2RZBDT2 (Alt: 1798317) RoHS : Compliant | 0 | |||
| 1831785 | Phoenix Contact | PC 5 4G762 PA14 PC54G762PA14 (Alt: 1831785) RoHS : Compliant | 0 | |||
| 1831727 | Phoenix Contact | MKDS 5 HV12952Z 7035LPD12 MKDS5HV12952Z7035LPD12 (Alt: 1831727) RoHS : Compliant | 0 | |||
| 1831772 | Phoenix Contact | PC 5 7G762 PA1357 PC57G762PA1357 (Alt: 1831772) RoHS : Compliant | 0 | |||
| 225831-7 | TE Connectivity | KITARINC COAXICON SOCKETSZ 1 (Alt: 225831-7) RoHS : Not Compliant | 0 | |||
| 0031.8317 | Schurter Electronic Components | Cartridge Fuse Holder 1 Fuse 1 A 500 VAC 500 VDC 5mm x 20mm Solder (Alt: 0031.8317) RoHS : Compliant | 0 | |||
| 2283170001 | TE Connectivity | (Alt: 2283170001) RoHS : Compliant | 0 | |||
| 1-966831-7 | TE Connectivity | (Alt: 1-966831-7) RoHS : Not Compliant | 0 | |||
| M20-7831742 | Harwin | 254mm 01 Pitch DIL Vertical PC Tail Socket Assembly selective gold tin 1717 contacts (Alt: M20-7831742) RoHS : Compliant | 0 | |||
| 89898-317LF | Amphenol Corporation | Conn Socket Strip RCP 34 POS 254mm Solder ST SMD Tube (Alt: 89898-317LF) RoHS : Compliant | 0 | |||
| 083171-1-03N | Grayhill Inc | (Alt: 083171-1-03N) RoHS : Compliant | 0 | |||
| B78476A8317A3 | TDK Corporation | Telecom Transformer 11 1500VAC 1dB Surface Mount (Alt: B78476A8317A003) RoHS : Compliant | 0 | |||
| 510-83-179-18-112101 | PRECI-DIP SSA | Conn PGA Socket SKT 179 POS 254mm Solder ST ThruHole Box (Alt: 510-83-179-18-112101) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 0D97098317 | Qnity Laird | (Alt: 0D97098317) RoHS : Compliant | 0 | ||
![]() Avnet Silica | C18317_ADELIA-50-W | LEDIL | Reflector for COB ChipOnBoard Warm Dim Constant Current LED Modules 50mm 36Degree Wide Beam (Alt: C18317_ADELIA-50-W) RoHS : Compliant | 0 | ||
![]() Component Electronics, Inc | C8317-04BFHSW0R | Hsuan Mao Technology Co | IN STOCK SHIP TODAY | 200 | ||
| 8317-10R | Vishay Dale | IN STOCK SHIP TODAY | 40 | |||
| 1648317-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 23 | ||
| 2831-7388-02 | MACOM | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | 8317 | Heyco | 8317-000 (TRANS BLADE BULK) | 0 | ||
| 8317-1032-A-35 | RAF Electronic Hardware | 0 | ||||
| 8317-832-A-24 | RAF Electronic Hardware | 0 | ||||
| 8317-832-A | RAF Electronic Hardware | 0 | ||||
| 58-31-701-26 | Southco | 0 | ||||
| 8317-1032-A-24 | RAF Electronic Hardware | 0 | ||||
| 48317 | Essentra Components | 0 | ||||
| 8317-832-A-34 | RAF Electronic Hardware | 0 | ||||
| 58-31-701-24 | Southco | 0 | ||||
| 3BT-P8317-00 | Acumnet / Camcar | M2.26-0.91 X 6 TXP PAN | 0 | |||
![]() EBV Elektronik | C18317_ADELIA-50-W | LEDIL | Reflector for COB ChipOnBoard Warm Dim Constant Current LED Modules 50mm 36Degree Wide Beam (Alt: C18317_ADELIA-50-W) RoHS : Compliant | 0 | ||
![]() Flip Electronics | ICS831721AGILF | Renesas Electronics Corporation | Stock | 160,000 | ||
| IDT831721AGILF | Renesas Electronics Corporation | Stock | 160,000 | |||
831721AGILF![]() | Integrated Device Technology Inc | Stock, Ship Today RoHS : Compliant |
| 160,000 | ||
| 831721AGILFT | Renesas Electronics Corporation | Stock RoHS : Compliant | 160,000 | |||
| IDT831742AGILF | Integrated Device Technology Inc | Stock | 120,000 | |||
831742AGILF![]() | Integrated Device Technology Inc | Stock, Ship Today RoHS : Compliant |
| 120,000 | ||
| ICS831742AGILF | Integrated Device Technology Inc | Stock | 120,000 | |||
![]() Master Electronics | 831704C7.MB | Crouzet | Switch Snap Action - N.O./N.C. - SPDT - Flat Lever - PC Pins. RoHS : Compliant |
| 1,002 | |
| 0831718 | Phoenix Contact | Device marker - Sheet - silver - unlabeled - can be labeled with: TOPMARK NEO - TOPMARK LASER - mounting type: adhesive - lettering field size: 27 x 18 mm - Number of individual labels: 54 RoHS : Compliant |
| 0 | ||
| 041783-1728 | ITT Interconnect Solutions | Rp DPX2MA Crimp Recept RoHS : Not Compliant |
| 0 | ||
| FW-02-03-LM-D-183-173 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-183-177 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-183-179 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| EQRD-078-31.77-TTL-TTL-1-B | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-183-177 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1831769 | APEM Inc | MEC SWITCH 10G RoHS : Compliant |
| 0 | ||
| 0831742 | Phoenix Contact | Device marker - Sheet - yellow - unlabeled - can be labeled with: TOPMARK NEO - TOPMARK LASER - mounting type: adhesive - lettering field size: 27 x 8 mm - Number of individual labels: 120 RoHS : Compliant |
| 0 | ||
| 0031.8317 | Schurter Electronic Components | OGN-SMD HOLDER WITH FUSE FST 1A COVER RoHS : Compliant |
| 0 | ||
| EQRD-078-31.75-TTL-TTL-1-B | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-183-175 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-183-174 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 041783-1733 | ITT Interconnect Solutions | DPX2ME-67S-67S-33B-00 RoHS : Not Compliant |
| 0 | ||
![]() Neutron USA | 2831780000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories ZQV 4N/9 BK RoHS : Compliant |
| 50 | |
AD8317ACPZ-R7![]() | Analog Devices Inc | RF Detector 8GHz Log Detector 50dB RoHS : Compliant |
| 50 | ||
| 2831700000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories ZQV 2.5N/5 BK RoHS : Compliant |
| 32 | ||
| 38.31.7.024.8240 | FINDER SpA | SPST-NO DIN Rail Panel Mount Interface Relay Module Screw, 3A 16.8 to 30V ac |
| 10 | ||
| 2831730000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories ZQV 2.5N/8 BK RoHS : Compliant |
| 10 | ||
| 9831784 | WIKA Instrument LP | Analogue Positive Pressure Gauge Bottom Entry, Connection Size 1/4 NPT |
| 8 | ||
| 083171-1-03N | Grayhill Inc | Rotary Switches 08A36-01-1-03N RoHS : Compliant |
| 4 | ||
| 2831760000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories ZQV 2.5N/20 BK RoHS : Compliant |
| 1 | ||
| 0831700 | Phoenix Contact | Marking labels, LS-EMLP 24 (30X12) WH RoHS : Compliant |
| 1 | ||
| 08317825165 | Altech Corporation | Proximity Sensors Inductive Sensor KJ6-M12MB68-DNS-V2 |
| 1 | ||
| 83170919 | Crouzet | Basic / Snap Action Switch, Microswitch, Subminiature, SPDT, 5A 250VAC, Button Actu, Solder Pin |
| 0 | ||
| 83170012 | Crouzet | Basic / Snap Action Switches Microswitch, Subminiature, V4-83170 Series, 831700 I X3 |
| 0 | ||
| 4X70G88317-AX | Axiom Manufacturing | AXIOM 16GB DDR4-2133 ECC UDIMM FOR LENOVO - 4X70G88317, TOP GRADE CHIPS AND COMP |
| 0 | ||
| 831709C2.DL | Crouzet | Basic/Snap Action Switch, Microswitch, SNSW 0.1A SLDR PLNSC RW79218491 |
| 0 | ||
| 1828317 | Phoenix Contact | PCB Connector, Female, Screw 7.62mm 10AWG 630V 20A, 1row 9 Pos, PC 4/ 9-STF-7,62 RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE38317 | Pasternack Enterprises | 0 | |||
| PE3C8317-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. 4.3-10 Male Right Angle to N Male Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8317-150CM can also be known as a low PIM right angle 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8317-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8317-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8317-150CM can also be used in the other direction and will be a type N male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8317-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402-LF, RF Cable Type: TFT-402-LF, RF Cable Impedance: 50 Ohm, Length: 60 inches. 4.3-10 Male Right Angle to N Male Low PIM Cable 60 Inch Length Using TFT-402-LF Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male low PIM cable 60 inch length using TFT-402-LF coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male right angle to N male low PIM cable 60 inch length using TFT-402-LF coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.3-10 cable connection on one end and type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assemblies have a male gender on end 1 and male on end 2. This 4.3-10 to N type cable is a male to male coax assembly, PE3C8317-60, can also be known as a low PIM right angle 4.3-10 plug to type N plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to type N plug cable assembly PE3C8317-60 is built with TFT-402-LF which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8317-60 can also be used in the other direction and will be N type male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male right angle to N male low PIM cable 60 inch length using TFT-402-LF coax using Times Microwave components. |
| 0 | ||
| PE3W08317 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Male to SMC Jack Cable Using RG178 Coax. PE3W08317 is a SMA male to SMC jack cable using RG178 coax. This Pasternack SMA male to SMC jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMC for connector 2. Our male SMA to jack SMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08317 SMA male to SMC jack cable assembly is constructed with RG178 coax. | 0 | |||
| PE3C8317-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. 4.3-10 Male Right Angle to N Male Low PIM Cable 200 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8317-200CM can also be known as a low PIM right angle 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8317-200CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8317-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8317-200CM can also be used in the other direction and will be a type N male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8317-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 19.68 inches. 4.3-10 Male Right Angle to N Male Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N male low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8317-50CM can also be known as a low PIM right angle 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8317-50CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8317-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8317-50CM can also be used in the other direction and will be a type N male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8317-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Male Right Angle to N Male Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8317-12 can also be known as a low PIM right angle 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8317-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8317-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8317-12 can also be used in the other direction and will be a type N male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8317-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. 4.3-10 Male Right Angle to N Male Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8317-100CM can also be known as a low PIM right angle 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8317-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8317-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8317-100CM can also be used in the other direction and will be a type N male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8317-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.3-10 Male Right Angle to N Male Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8317-36 can also be known as a low PIM right angle 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8317-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8317-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8317-36 can also be used in the other direction and will be a type N male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W16831-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. Snap-On BMA Jack to SMB Plug Cable 72 Inch Length Using RG316 Coax., Radio frequency assembly snap-on BMA jack to SMB plug cable 72 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The snap-on BMA jack to SMB plug cable 72 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA cable connection on one end and a SMB cable connection on the other. Our BMA to SMB cable assembly has a jack gender on end 1 and a plug on end 2. PE3W16831-72 can also be known as a BMA female to SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W16831-72 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our BMA jack to SMB plug cable has a maximum VSWR of 1.4:1. BMA female to SMB male cable assembly PE3W16831-72 is built with RG316 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to SMB cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16831-72 can also be used in the other direction and will be a SMB plug to BMA jack cable assembly if the opposite connectivity is required. BMA female to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to SMB cable assembly for quick shipment worldwide. Variations of BMA and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMB RF cable assembly as per your requirements. |
| 0 | ||
| PE8317 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Minimum Frequency: 2 GHz, Maximum Frequency: 10 GHz, Impedance: 50 Ohm, Maximum Insertion Loss: 2 dB, Maximum Input Power: 10 Watts, Minimum Isolation: 13 dB. Isolator With 13 dB Isolation From 2 GHz to 10 GHz, 10 Watts And SMA Female. Pasternack RF isolator PE8317 is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This RF isolator is manufactured with SMA connectors that are female. Our SMA isolator has a minimum frequency of 2 GHz and a maximum frequency of 10 GHz. This SMA coaxial isolator has a minimum isolation of 13 dB and a maximum input power of 10 Watts. PE8317 coaxial SMA isolator is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our radio frequency isolator can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 0 | ||
| PE3C8317-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 4.3-10 Male Right Angle to N Male Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8317-24 can also be known as a low PIM right angle 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8317-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8317-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8317-24 can also be used in the other direction and will be a type N male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8317 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 4.3-10 Male Right Angle to N Male Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male low PIM cable using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N male low PIM cable using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8317 can also be known as a low PIM right angle 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8317 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8317 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8317 can also be used in the other direction and will be a type N male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. | 0 | |||
| PE3C8317-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 4.3-10 Male Right Angle to N Male Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8317-48 can also be known as a low PIM right angle 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8317-48 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8317-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8317-48 can also be used in the other direction and will be a type N male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W18317 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. Reverse Polarity MCX Plug to SMA Male Right Angle Cable Using RG178 Coax. PE3W18317 is a reverse polarity MCX plug to SMA male right angle cable using RG178 coax. This Pasternack reverse polarity MCX plug to SMA male right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMA for connector 2. MCX to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity plug MCX to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18317 MCX reverse polarity plug to SMA male right angle cable assembly is constructed with RG178 coax. | 0 | |||
![]() Vyrian | AD8317-EVALZ | Analog Devices Inc | RoHS : Compliant | 11,920 | ||
AD8317ACPZ-R7![]() | Analog Devices Inc | Log Or Antilog Amplifier, 1 Func, 10000MHz Band Width, BIPolar, PDSO8 RoHS : Compliant | 11,257 | |||
5962-01-383-1752![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 3000uV Offset-Max, BIPolar, MBCY8 RoHS : Not Compliant | 11,066 | |||
| 1-178317-5 | TE Connectivity | Rectangular Power Connector, 8 Contact(s), Male, Solder Terminal, Receptacle RoHS : Compliant | 8,412 | |||
| 1828317 | Phoenix Contact | Barrier Strip Terminal Block, 20A, 4mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 8,032 | |||
| 1883174 | Phoenix Contact | Strip Terminal Block, 10A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 7,797 | |||
| PMCT8317A0IREER | Texas Instruments | 5A, PQCC36 RoHS : Not Compliant | 7,507 | |||
AD8317ACPZ-R2![]() | Analog Devices Inc | Log Or Antilog Amplifier, 1 Func, 10000MHz Band Width, BIPolar, PDSO8 RoHS : Compliant | 7,442 | |||
| AD8317ACPZ1-WP | Analog Devices Inc | Analog Computational Function, BIPolar, PDSO8 RoHS : Compliant | 7,286 | |||
AD8317ACPZ-WP![]() | Analog Devices Inc | Log Or Antilog Amplifier, 1 Func, 10000MHz Band Width, BIPolar, PDSO8 RoHS : Compliant | 7,078 | |||
AD8317ACPZ-REEL7![]() | Analog Devices Inc | Log Or Antilog Amplifier, 1 Func, 10000MHz Band Width, BIPolar RoHS : Compliant | 6,447 | |||
| AD8317ACPZ1-REEL7 | Analog Devices Inc | Analog Computational Function, BIPolar, PDSO8 RoHS : Compliant | 6,218 | |||
| AD9683-170EBZ | Analog Devices Inc | 5,842 | ||||
AD8317ACHIPS![]() | Analog Devices Inc | Log Or Antilog Amplifier, 1 Func, 10000MHz Band Width, BIPolar RoHS : Compliant | 5,456 | |||
| 2831-7388-02 | M/a-com Technology Solutions | RF SMA Connector, Male, Cable Mount, Crimp Terminal, Plug | 390 | |||
![]() Win Source Electronics | AD8317ACP | Analog Devices Inc | RF Detector 1MHz-10GHz 8-LFCSP |
| 20,916 | |
AD8317ACPZ-R7![]() | Analog Devices Inc | RF Detector 1MHz to 10000MHz 12dBm 8-Pin LFCSP EP T/R / IC AMP LOG DETECT 8GHZ 8-LFCSP RoHS : Compliant |
| 9,598 | ||
| AD8317ACPZ | Analog Devices Inc | IC AMP LOG DETECT 8GHZ 8-LFCSP |
| 6,068 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |