 |
Datenblatt-Suchmaschine für elektronische Bauteile |
|
|
Datenblatt-Suchmaschine für elektronische Bauteile |
|
887-3-R220J Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
 Avnet Americas | AC0402FR-07887RL | YAGEO Corporation | SMD Chip Resistor, 887 Ohm, ? 1%, 63 mW, 0402 [1005 Metric], Thick Film, General Purpose, AC Series - Tape and Reel (Alt: AC0402FR-07887RL) RoHS : Compliant |
| 1,860,000 | |
| CRCW0603887RFKEA | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW0603887RFKEA) RoHS : Compliant |
| 140,000 | ||
| NRC04F8871TRF | NIC Components Corp | SMD Chip Resistor, 8.87 kohm, ? 1%, 63 mW, 0402 [1005 Metric], Thick Film, General Purpose - Tape and Reel (Alt: NRC04F8871TRF) RoHS : Compliant |
| 120,000 | ||
| ERA-2AEB8870X | Panasonic Electronic Components | SMD Chip Resistor, 887 ohm, ? 0.1%, 63 mW, 0402 [1005 Metric], Metal Film (Thin Film) - Tape and Reel (Alt: ERA-2AEB8870X) RoHS : Compliant |
| 50,000 | ||
| NRC04F8872TRF | NIC Components Corp | SMD Chip Resistor, 88.7 kohm, ? 1%, 63 mW, 0402 [1005 Metric], Thick Film, General Purpose - Tape and Reel (Alt: NRC04F8872TRF) RoHS : Compliant |
| 10,000 | ||
| ERJ-2RKF8873X | Panasonic Electronic Components | SMD Chip Resistor, 887 kohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film - Tape and Reel (Alt: ERJ-2RKF8873X) RoHS : Compliant |
| 10,000 | ||
| 5-1393788-7 | TE Connectivity | Relay Signal DPDT-2CO 250VAC 12VDC Surface Mount - Tape and Reel (Alt: 5-1393788-7) RoHS : Compliant |
| 2,000 | ||
| MC33887PEKR2 | NXP Semiconductors | - Tape and Reel (Alt: MC33887PEKR2) RoHS : Compliant |
| 1,000 | ||
| 5558872-1 | TE Connectivity | Modular Connector, RJ22 Jack, 1 x 1 (Port), 4P4C, Cat3, Through Hole Mount - Trays (Alt: 5558872-1) RoHS : Compliant |
| 817 | ||
| 5788792-1 | TE Connectivity | D Sub Connector, Standard, Plug, AMPLIMITE HD-20 Series, 9 Contacts, DE, Solder - Trays (Alt: 5788792-1) RoHS : Compliant |
| 669 | ||
| RNC60H8872DRB14 | Vishay Intertechnologies | - Bulk (Alt: RNC60H8872DRB14) RoHS : Not Compliant |
| 200 | ||
| 5962-8876801PC | Broadcom Limited | Optocoupler Logic-Out Three State DC-IN 1-CH 8-Pin CDIP - Rail/Tube (Alt: 5962-8876801PC) RoHS : Compliant |
| 84 | ||
PIC16F887-I/PT | Microchip Technology Inc | 8-bit MCU, PIC, 20 MHz, 14 KB, 368 B, 44 Pins, TQFP - Trays (Alt: PIC16F887-I/PT) RoHS : Compliant |
| 76 | ||
| 5788793-1 | TE Connectivity | - Trays (Alt: 5788793-1) RoHS : Compliant |
| 51 | ||
| 5788794-1 | TE Connectivity | - Trays (Alt: 5788794-1) RoHS : Compliant |
| 44 | ||
 Newark | MP014887 | SPC Multicomp | CONTACT, SOCKET, 28-26AWG, CRIMP; RoHS : Compliant |
| 10,000 | |
| 3887 | GEARWRENCH | SET RAT TAP & DIE SAE MET 77PC; RoHS : Not Compliant |
| 2,106 | ||
| SMA-Q0207FTDT887R | TE Connectivity | MELF SMA-Q 887R 50PPM 0207 1W; RoHS : Compliant |
| 2,000 | ||
| SMA-Q0207FTDT887R | TE Connectivity | MELF SMA-Q 887R 50PPM 0207 1W; RoHS : Compliant |
| 2,000 | ||
| KSZ8873RLLI | Microchip Technology Inc | SWITCH, ENET, 3PORT, 1X RMII, 64LQFP; RoHS : Compliant |
| 710 | ||
| PIC16F18875-I/PT | Microchip Technology Inc | MCU, 8BIT, PIC16F, 32MHZ, TQFP-44; RoHS : Compliant |
| 605 | ||
| 633938 877500 | Belden Inc | RG-6/U PLENUM COAX; RoHS : Compliant |
| 500 | ||
| 5558872-1 | TE Connectivity | RJ22 CONNECTOR, JACK, 4P4C, 1PORT, CAT3; RoHS : Compliant |
| 352 | ||
| 8870MN 008100 | Belden Inc | MULTIPAIR CABLE, SHIELDED, 18AWG, 100FT; RoHS : Not Compliant |
| 100 | ||
| DDZ9688-7 | Diodes Incorporated | ZENER DIODE, 4.7V, 0.5W, SOD-123; RoHS : Compliant |
| 95 | ||
| DDZ9688-7 | Diodes Incorporated | ZENER DIODE, 4.7V, 0.5W, SOD-123; RoHS : Compliant |
| 95 | ||
| 031-6887 | Amphenol RF | RF COAX CONN, TNC JACK, 50 OHM, PANEL; Connector Type:TNC Coaxial; Connector Body Style:Straight Flanged Jack; Coaxial Termination:Solder; Impedance:50ohm; Coaxial Cable Type:-; Contact Material:Beryllium Copper; Frequency Max:11GHz RoHS Compliant: Yes RoHS : Compliant |
| 71 | ||
| 11.99.8871 | SPC Multicomp | CABLE ASSEMBLY, USB3.0, TYPE A-B, 3M; (Alternate Part Number: 7611990188369 RoHS : Compliant |
| 54 | ||
| 10088700 | Lapp Group | PROTECTIVE COVER, HOUSING, PA/LIGHT GRAY; Accessory Type:Protective Cover; For Use With:Lapp EPIC H-B 16 Series Rectangular Connector Housings; Connector Body Material:Nylon (Polyamide) Body; Product Range:EPIC Series RoHS Compliant: Yes RoHS : Compliant |
| 10 | ||
| 11.02.8879 | Rotronic-Secomp AG | USB CABLE, 3.0 A-MICRO B PLUG, 2M, BLK; (Alternate Part Number: 7611990195558 RoHS : Compliant |
| 5 | ||
 Analog Devices Inc | MAX8877EZK50+T | Analog Devices Inc | Low-Noise, Low-Dropout, 150mA RoHS : Compliant |
| 12,979 | |
AD7887WARMZ-RL | Analog Devices Inc | 2 CHANNEL, SERIAL 12-BIT ADC I RoHS : Compliant |
| 9,000 | ||
| AD7887ARZ | Analog Devices Inc | 2 CHANNEL, SERIAL 12-BIT ADC I RoHS : Compliant |
| 7,645 | ||
| MAX8877EUK29+T | Analog Devices Inc | Low-Noise, Low-Dropout, 150mA RoHS : Compliant |
| 7,500 | ||
| MAX8878EUK36+ | Analog Devices Inc | Low-Noise, Low-Dropout, 150mA | 4,583 | |||
| MAX8875EUK50+T | Analog Devices Inc | 150mA, Low-Dropout Linear Regu RoHS : Compliant |
| 2,992 | ||
| MAX6887AETE+ | Analog Devices Inc | Hex/Quad, Power-Supply Supervi RoHS : Compliant |
| 1,687 | ||
| MAX8878EUK28+ | Analog Devices Inc | Low-Noise, Low-Dropout, 150mA RoHS : Compliant | 1,503 | |||
| LTM2887HY-5S#PBF | Analog Devices Inc | SPI/Dig or I2C micronMod Isola RoHS : Compliant |
| 1,190 | ||
| MAX887HESA+T | Analog Devices Inc | 100 Duty Cycle, Low-Noise, Ste RoHS : Compliant |
| 1,036 | ||
| MAX8887EZK18+ | Analog Devices Inc | Low-Dropout, 300mA Linear Regu RoHS : Compliant | 372 | |||
| AD7887BRZ-REEL | Analog Devices Inc | 2 CHANNEL, SERIAL 12-BIT ADC I RoHS : Compliant |
| 0 | ||
| LTC3887EUJ#WTRPBF | Analog Devices Inc | 2x Out PolyPhBuck DC/DC Cntr w RoHS : Compliant |
| 0 | ||
| MAX8877EUK29+ | Analog Devices Inc | Low-Noise, Low-Dropout, 150mA RoHS : Compliant | 0 | |||
| MAX6887AETE+T | Analog Devices Inc | Hex/Quad, Power-Supply Supervi RoHS : Compliant |
| 0 | ||
 NXP Semiconductors | KIT33887EKEVBE | NXP Semiconductors | Evaluation Kit - MC33887EK, H-Bridge, 120mOhm RDSON Typical with Sleep Mode and Current Sense, RoHS : Not Compliant |
| 39 | |
 RS | 88732-8702 (887-3287-02) | Molex | CABLE ASSEMBLY 28AWG 5 POS USB TO 5 POSUSB M-M SOLDER-SOLDER BAG, 88740 SERIES |
| 751 | |
| 926887-1 (6805378) | TE Connectivity | UNIVERSAL MATE-N-LOK CRIMP PIN CONN, MALE, CRIMP, TIN PLATING 20 - 14 AWG |
| 595 | ||
| 5558872-1 | TE Connectivity | CAT3 4P4C STRAIGHT THROUGH HOLE UTP RJ22 MODULAR JACK CONNECTOR RoHS : Compliant |
| 49 | ||
| 10088700 | Lapp Group | HB16 DUST COVER DUAL LEVER FOR SURFACE MOUNT BASE RoHS : Compliant |
| 40 | ||
| 88732-9200 (887-3292-00) | Molex | CABLE ASSEMBLY, USB TYPE-A, USB TYPE-B, 4 COND ROUND CBL, 6.86FT., 28 AWG, SHLD |
| 27 | ||
| 3887 | Adafruit Industries | SMT RIGHT-ANGLE CONNECTOR FOR MICRO:BIT |
| 25 | ||
| 8870K3 | SAFRAN | PUSHBUTTON SWITCH, SPST, OFF-(ON),TALL PLUNGER WITH CAP, FLUSH MOUNT,115VAC,7.5A |
| 9 | ||
| 2170887 (2170887/328) | Lapp Group | ETHERLINE CAT5 HYBRID CABLE, 22AWG/2PR+16AWG/4C, HALOGENFREE, GREEN |
| 6 | ||
| 3887 | T&B Fittings | GROUNDING BUSHING, INSULATED THREADED, 3", ALUMINUM ZINC PLATED, 8 - 2/0 AWG |
| 2 | ||
| OXP12X800 (1SCA145887R1001) | ABB Low Voltage Products and Systems | OPERATING SHAFT 31.5" (800MM) |
| 2 | ||
| 1778874 (PTSM 0 5/ 6-P-2 5) | Phoenix Contact | PCB PLUG PUSH-IN 2.5MM 20AWG 160V 6A 6 POSITION COMBICON PTSM SERIES |
| 2 | ||
| 7038887 (7038887/328) | Lapp Group | UNITRONIC SENSOR FD CONT.FLEX CABLE, 22AWG/5C, SHIELDED, PUR, BLACK |
| 1 | ||
| 887 | RACO | 4-11/16" COVER - 1.594 20AMP RECEPTACLE |
| 0 | ||
| 887 | Keystone Electronics Corp | SPACER, 1/4 ROUND, CLEAR HOLE, LENGTH .625, HOLE SIZE 6, NYLON 6/6 |
| 0 | ||
| 887 | Adafruit Industries | COOL WHITE LED WEATHERPROOF FLEXI-STRIP 60 LED - (1 M) |
| 0 | ||
 Microchip Technology Inc | PIC16LF18877T-I/MV | Microchip Technology Inc | 56KB Flash, 4KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, UQFN, Projected EOL: 2046-05-13 RoHS : Compliant |
| 52,800 | |
| LAN8871T-V/PUAVAO | Microchip Technology Inc | 1000BASE-T1 RGMII PHY, VQFN, Projected EOL: 2051-07-08 RoHS : Compliant |
| 11,000 | ||
| LAN8872-I/PUA | Microchip Technology Inc | 1000BASE-T1 SGMII PHY, VQFN, Projected EOL: 2051-07-02 RoHS : Compliant |
| 4,400 | ||
| PIC16F18875-E/P | Microchip Technology Inc | 14KB, 1KB RAM, 256 EE, 36 I/O, DSM, ADC w/MathPak, WWDT, CRC/SCAN, CIPs, PDIP, Projected EOL: 2040-10-26 RoHS : Compliant |
| 4,130 | ||
| PIC16LF18877-E/MV | Microchip Technology Inc | 56KB Flash, 4KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, UQFN, Projected EOL: 2046-05-13 RoHS : Compliant |
| 2,117 | ||
| PIC16LF18875-I/ML | Microchip Technology Inc | 14KB, 1KB RAM, 256 EE, 36 I/O, DSM, ADC w/MathPak, WWDT, CRC/SCAN, CIPs, QFN, Projected EOL: 2040-11-12 RoHS : Compliant |
| 1,866 | ||
| PIC16F18877-E/ML | Microchip Technology Inc | 56KB Flash, 4KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, QFN, Projected EOL: 2046-05-13 RoHS : Compliant |
| 1,490 | ||
PIC16F18877T-I/PT | Microchip Technology Inc | 56KB Flash, 4KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, TQFP, Projected EOL: 2046-05-13 RoHS : Compliant |
| 1,200 | ||
| PIC16F18876-I/ML | Microchip Technology Inc | 28KB Flash, 2KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, QFN, Projected EOL: 2046-08-09 RoHS : Compliant |
| 985 | ||
| PIC16F18876-E/PT | Microchip Technology Inc | 28KB Flash, 2KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, TQFP, Projected EOL: 2046-08-09 RoHS : Compliant |
| 641 | ||
| PIC16F18877-E/MVVAO | Microchip Technology Inc | 56KB Flash, 4KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, UQFN, Projected EOL: 2045-12-01 RoHS : Compliant |
| 292 | ||
| PIC16F18875-I/PT | Microchip Technology Inc | 14KB, 1KB RAM, 256 EE, 36 I/O, DSM, ADC w/MathPak, WWDT, CRC/SCAN, CIPs, TQFP, Projected EOL: 2040-10-26 RoHS : Compliant |
| 155 | ||
| KSZ8873RLLI | Microchip Technology Inc | 3-Port 10/100 Switch w/ 1x RMII, LQFP, Projected EOL: 2036-02-09 RoHS : Compliant |
| 27 | ||
| PIC16F18875-I/P | Microchip Technology Inc | 14KB, 1KB RAM, 256 EE, 36 I/O, DSM, ADC w/MathPak, WWDT, CRC/SCAN, CIPs, PDIP, Projected EOL: 2040-10-26 RoHS : Compliant |
| 9 | ||
| KSZ8873MLL-EVAL | Microchip Technology Inc | KSZ8873MLL EVAL BOARD, Projected EOL: |
| 7 | ||
 Bisco Industries | 5808-87-25-C2 | Seastrom Mfg | 13,635 | |||
| E887RS | MISC MAGNETS | 1,000 | ||||
| 4521-38-87-2-C2 | Seastrom Mfg | 201 | ||||
| CER-1887-02-CT-CI | Staffall | 100 | ||||
| 887 | Keystone Electronics Corp | 57 | ||||
| 53887-1 | TE Connectivity | RoHS : Compliant | 48 | |||
| 1887-632-AL | RAF Electronic Hardware | 27 | ||||
| CER-1887-2D-CT-C1 | Staffall | 21 | ||||
| 4KIS088-73GG | Advanced Interconnect | 21 | ||||
| 5962-8876001PA | ACTIVE COMPNTS/DIODES | 16 | ||||
| CM8870PI-B | ACTIVE COMPNTS/DIODES | 11 | ||||
| 3718877-22 | MISCELLANEOUS | 6 | ||||
| 62-0-8887-11 | Southco | 6 | ||||
| 12288773 | SOCKET SCREWS | 1 | ||||
| M28876/10BDW | MIL-SPEC Connectors | 1 | ||||
 Rochester Electronics | NCV887801D1R2G | onsemi | Switching Controller, Current-mode, 495kHz Switching Freq-Max, PDSO8 RoHS : Compliant |
| 11,611 | |
| FDS8878-G | onsemi | FDS8878 - 30V N-Channel PowerTrench MOSFET RoHS : Compliant |
| 957 | ||
| CG8887AM | Infineon Technologies AG | Semiconductor | 2,173 | |||
| AD7887ARZ | Analog Devices Inc | IC ADC 1 CONV 12Bits SAR DSP, MICROWIRE, QSPI, SPI 8-SOIC Tube RoHS : Compliant |
| 1,258 | ||
5962-88760012A | Texas Instruments | Operational Amplifier, 2 Func, 150uV Offset-Max, BIPolar, CQCC20 RoHS : Not Compliant |
| 3 | ||
DAC8871SPW | Texas Instruments | IC DAC 1 CONV 16Bits R-2R 3-Wire Serial, DSP, MICROWIRE, QSPI, SPI 16-SOP Tube RoHS : Compliant |
| 2 | ||
| MAX8875EUK25 | Maxim Integrated Products | Fixed Positive LDO Regulator RoHS : Not Compliant |
| 424 | ||
MAX8875EUK50+T | Maxim Integrated Products | Fixed Positive LDO Regulator, 5V, 0.22V Dropout, PDSO5 RoHS : Compliant |
| 10,106 | ||
| MAX8877EUK15 | Maxim Integrated Products | MAX8877 Low-Noise, Low-Dropout, 150mA Linear Regulator With 2982 Pinout RoHS : Not Compliant |
| 1,774 | ||
| MAX8877EUK26-T | Maxim Integrated Products | Fixed Positive LDO Regulator, 2.6V, 0.12V Dropout, PDSO5 RoHS : Not Compliant |
| 12,500 | ||
MAX8877EZK32+ | Maxim Integrated Products | Fixed Positive LDO Regulator, 3.2V, 0.12V Dropout, PDSO5 RoHS : Compliant |
| 1,572 | ||
| MAX8878EZK18-T | Maxim Integrated Products | Fixed Positive LDO Regulator RoHS : Not Compliant |
| 55,000 | ||
| MAX8887EZK18-T | Maxim Integrated Products | Fixed Positive LDO Regulator, 1.8V, 0.2V Dropout, BICMOS, PDSO5 RoHS : Not Compliant |
| 13,490 | ||
| MAX8887EZK28+T | Maxim Integrated Products | Fixed Positive LDO Regulator, 2.8V, BICMOS, PDSO5 RoHS : Compliant |
| 80,000 | ||
| UPD8874CY-A | Renesas Electronics Corporation | CCD Sensor, 10800 Horiz pixels, 3 Vert pixels, 11.40-12.60V, Rectangular, Through Hole Mount RoHS : Compliant |
| 249 | ||
 Sager | 887 | Keystone Electronics Corp | Standoffs & Spacers 5/8 6-32 NYL SPACER |
| 0 | |
| 788792-1 | TE Connectivity | D-Sub Standard Connectors 09 MSIII PLUG 318 RoHS : Not Compliant | 0 | |||
| 8887 | Keystone Electronics Corp | Standoffs & Spacers PC LOCKIN SUPPORT 1.00 NYL 94V-0 |
| 0 | ||
| A18874-12 | Qnity Laird | INTEGRATED SOLUTIONS / MFS / COOLZORB MAXZORB / COOLZORB MAXZORB,120 / 18X18IN, / UOM=EA / PACKAGING=BULK |
| 0 | ||
| A18876-01 | Qnity Laird | TPUTTY 607MF SYRINGE 30CC,NET 30CC |
| 0 | ||
| TFR0402DFC8870KR | Littelfuse Inc | TFR 0402 10PPM 0.1W 887 OHM�0.5% |
| 0 | ||
| TFR0603BHC8872NR | Littelfuse Inc | TFR 0603 25PPM 0.1W 88.7K OHM�0.1% |
| 0 | ||
| TFR0603DHC8870NR | Littelfuse Inc | TFR 0603 25PPM 0.1W 887 OHM�0.5% |
| 0 | ||
| TFR0805BHD8871NR | Littelfuse Inc | TFR 0805 25PPM 0.125W 8.87K OHM�0.1% |
| 0 | ||
| TFR1206DHG8872NR | Littelfuse Inc | TFR 1206 25PPM 0.25W 88.7K OHM�0.5% |
| 0 | ||
| TFR1206EFG8871NR | Littelfuse Inc | TFR 1206 10PPM 0.25W 8.87K OHM�0.01% | 0 | |||
| 1300830887 | Molex | Cable Mounting & Accessories 92433 REEL W/34048 QUAD TAP 5-20 RECPTS |
| 0 | ||
| 1408874 | Phoenix Contact | Fiber Optic Cable Assemblies FOC-M12-M12-GB02/2 RoHS : Compliant | 0 | |||
| 0558870401 | Molex | I/O Connectors | 0 | |||
| 0638608870 | Molex | Crimpers / Crimping Tools | 0 | |||
 TME | 887 | Keystone Electronics Corp | Spacer sleeve; cylindrical; polyamide; L: 15.9mm; Øout: 6.4mm |
| 2,490 | |
| 788792-1 | TE Connectivity | Connector: D-Sub; PIN: 9; plug; on PCBs; angled; soldering,THT; 6A RoHS : Not Compliant |
| 650 | ||
| 8870330000 | Weidmüller Interface GmbH & Co. KG | Relay: electromagnetic; 48VDC; DPDT; Icontacts max: 8A; max.240VAC RoHS : Compliant |
| 0 | ||
| 8876380050 | Weidmüller Interface GmbH & Co. KG | Fiber patch cord; OM1; ST/UPC,both sides; 5m; 62.5/125um; PVC RoHS : Compliant |
| 0 | ||
| 88778 002100 | Belden Inc | Wire; 6x2x22AWG; stranded; Cu; FEP; red; -70÷200°C; 300V; CPR: Eca |
| 0 | ||
| 8887 | Keystone Electronics Corp | PCB distance; polyamide; L: 25.4mm; Mount.plate thick: 1.57mm |
| 0 | ||
| MRS16000C8878FC100 | Vishay Intertechnologies | Resistor: thin film; 8.87Ω; THT; 400mW; ±1%; 200V; Ø0.5x29mm |
| 0 | ||
| MCT06030D8872BPW00 | Vishay Intertechnologies | Resistor: thin film; 88.7kΩ; SMD; 0603; 0.125W; ±0.1%; MCT0603; 0 RoHS : Compliant |
| 0 | ||
| MCT06030F8879CP100 | Vishay Intertechnologies | Resistor: thin film; 88.7Ω; SMD; 0603; 0.125W; ±0.25%; MCT0603; 0 RoHS : Compliant |
| 0 | ||
| MF0W8FF8872A50 | Royal Electronic Factory (Thailand) Co Ltd | Resistor: metal film; 88.7kΩ; THT; 125mW; ±1%; MF; 200V; Ø1.85x3.5mm |
| 0 | ||
| TFR0402DFC8870KR | Littelfuse Inc | Resistor: thin film; 887Ω; precise; SMD; 0402; 100mW; ±0.5%; TFR |
| 0 | ||
| TFR0603BHC8872NR | Littelfuse Inc | Resistor: thin film; 88.7kΩ; precise; SMD; 0603; 100mW; ±0.1%; TFR |
| 0 | ||
| TFR0603DHC8870NR | Littelfuse Inc | Resistor: thin film; 887Ω; precise; SMD; 0603; 100mW; ±0.5%; TFR |
| 0 | ||
| TFR0805BHD8871NR | Littelfuse Inc | Resistor: thin film; 8.87kΩ; precise; SMD; 0805; 125mW; ±0.1%; TFR |
| 0 | ||
| TFR1206DHG8872NR | Littelfuse Inc | Resistor: thin film; 88.7kΩ; precise; SMD; 1206; 250mW; ±0.5%; TFR |
| 0 | ||
 ComSIT USA | 887 | KEYSTONE ELECTRONICS CORP | AVAILABLE EU | 618 | ||
| LTR18EZPF8870 | ROHM Semiconductor | AVAILABLE EU RoHS : Compliant | 2,778,750 | |||
| 8870 | WEBER PRECISION GRAPHICS | AVAILABLE EU | 24 | |||
| FDS8870 | onsemi | AVAILABLE EU RoHS : Compliant | 1,595 | |||
| RK73H2BTTD8870F | KOA Speer Electronics Inc | AVAILABLE EU RoHS : Compliant | 34 | |||
| MC33887APVWR2 | NXP Semiconductors | AVAILABLE EU | 473 | |||
DRV8874QPWPRQ1 | Texas Instruments | AVAILABLE EU RoHS : Compliant | 2,324 | |||
| DRV8874QPWPRQ1 | Texas Instruments | AVAILABLE EU RoHS : Compliant | 1,853 | |||
ComSIT USA | 2,23887E+11 | Philips Semiconductors | SURFACE-MOUNT CERAMIC MULTILAYER CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 12.1951% +Tol, 12.1951% -Tol, C0G, 30ppm/Cel TC, 0.00000082uF, Surface Mount, 0603 RoHS : Not Compliant | 34,000 | ||
| U2510SK6164DISME887 | ZMDI | Electronic Component RoHS : Not Compliant | 6,020 | |||
| LNG887618000MHZ | Nihon Dempa Kogyo Co Ltd | Electronic Component RoHS : Compliant | 5,000 | |||
| MRS25000C8870FC100 | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.6W, 887ohm, 350V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 4,000 | |||
| C0805C683K5RAC90887025 | KEMET Corporation | SURFACE MOUNT MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.068uF, Surface Mount, 0805 RoHS : Not Compliant | 4,000 | |||
| PMB8876X21G | Intel Corporation | Electronic Component RoHS : Compliant | 1,032 | |||
| 887019 | Eska | Electronic component/module, board-mount, for industrial or automation control applications RoHS : Compliant | 1,000 | |||
FDP8870 | Fairchild Semiconductor Corporation | 30 V, 156 A, 4.1 MILLI OHM N-CHANNEL POWERTRENCH MOSFET Power Field-Effect Transistor, 19A I(D), 30V, 0.0046ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Compliant | 800 | |||
| MAL215097887E3 | Vishay Intertechnologies | SMD Chip Aluminum Capacitors RoHS : Compliant | 600 | |||
| DRX8872CPLA1 | TDK Micronas GmbH | COFDM DEMODULATOR/FEC Consumer Circuit, PQFP80 RoHS : Not Compliant | 357 | |||
| UPD78F0887GKAGAJAX | Renesas Electronics Corporation | 8-BIT SINGLE-CHIP MICROCONTROLLER Microcontroller, 8-Bit, FLASH, 20MHz, CMOS, PQFP64 RoHS : Compliant | 341 | |||
| AD7887ARZ | Analog Devices Inc | 2.7 V TO 5.25 V, MICROPOWER, 2-CHANNEL, 125 KSPS, 12-BIT ADC IN 8-LEAD SOIC ADC, Successive Approximation, 12-Bit, 1 Func, 2 Channel, Serial Access, CMOS, PDSO8 RoHS : Compliant | 92 | |||
| BGE887BO | Philips Semiconductors | OPTICAL RECEIVER MODULE Receiver, 1290nm Min, 1600nm Max, Panel Mount RoHS : Not Compliant | 55 | |||
| MT8870CE | Mitel Networks Corporation | DTMF Signaling Circuit, CMOS, PDIP18 RoHS : Not Compliant | 46 | |||
AD7887ARM | Analog Devices Inc | 2.7 V TO 5.25 V, MICROPOWER, 2-CHANNEL, 125 KSPS, 12-BIT ADC IN 8-LEAD MSOP ADC, Successive Approximation, 12-Bit, 1 Func, 2 Channel, Serial Access, CMOS, PDSO8 RoHS : Not Compliant | 30 | |||
 Interstate Connecting Components | 887 | Keystone Electronics Corp | CLEAR HOLE SPACER NYLON |
| 354 | |
| M28876/12B11P1 | Amphenol Fiber Systems International | FIBER JN RCPT 4 CHNL MIL WITH STRT BKSHL |
| 193 | ||
| M28876/1F2S6 | Amphenol Fiber Systems International | FIBER RCPT 18 CHNL MIL |
| 12 | ||
| M28876/1B1P6N | Amphenol Fiber Systems International | FIBER RCPT 4 CHNL MIL |
| 9 | ||
| M28876/2B12P3 | Amphenol Fiber Systems International | FIBER RCPT 4 CHNL MIL WITH STRT BCKSHL |
| 7 | ||
| 688701-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCD-609-08CS2603 RoHS : Compliant | 0 | |||
| 759-887-09 | Glenair Inc | 0 | ||||
8-2176088-7 | TE Connectivity | RP 1J 0.166W 7K15 0.1% 25PPM 1 RoHS : Compliant |
| 0 | ||
| 887-569-M-N | Glenair Inc | 0 | ||||
| M28876/12B11P1 | Glenair Inc | 28876 J/N RECP 4C PIN w/ STR B/S |
| 0 | ||
| M28876/14B11S6 | Glenair Inc | 28876 J/N RECP 4C SKT w/ 90 degree B/S |
| 0 | ||
| M28876/14C13P6 | Glenair Inc | 28876 J/N RECP 8C PIN w/ 90 degree B/S |
| 0 | ||
| M28876/1B1P6N | Glenair Inc | 28876 WALL MT 4C PIN |
| 0 | ||
| M28876/1C2P4N | Glenair Inc | 28876 WALL MT 6C PIN |
| 0 | ||
| M28876/2B12P3 | Glenair Inc | 28876 WALL MT 4C PIN w/ STR B/S |
| 0 | ||
 NexGen Digital | DRV8876PWPR | Texas Instruments | RoHS : Compliant | 232,772 | ||
| CRCW0603887KFKEA | Vishay Huntington | 30,261 | ||||
| RK73H1JTTD8873F | KOA Speer Electronics Inc | RoHS : Compliant | 25,000 | |||
DRV8872DDAR | Texas Instruments | RoHS : Compliant | 10,000 | |||
GRM1887U1H101JZ01D | Murata Manufacturing Co Ltd | RoHS : Compliant | 7,997 | |||
| PIC16F18875-I/P | Microchip Technology Inc | RoHS : Compliant | 2,073 | |||
| ERJ-3EKF8871V | Panasonic Electronic Components | 1,651 | ||||
| ERA3AEB8871V | Panasonic Electronic Components | RoHS : Compliant | 741 | |||
| 120887528 | Jite Connectors Inc | 596 | ||||
| FDC8878 | onsemi | RoHS : Compliant | 434 | |||
| 640388-7 | TE Connectivity | RoHS : Compliant | 92 | |||
| RN731JTTD8871B25 | KOA Speer Electronics Inc | RoHS : Compliant | 17 | |||
| RC0402FR-07887KL | YAGEO Corporation | RoHS : Compliant | 13 | |||
| 5962-8874601UA | Microsemi FPGA & SoC (now Microchip) | 6 | ||||
| 1658871-1 | TE Connectivity | RoHS : Compliant | 6 | |||
 PEI Genesis | M28876/12B11P1 | Amphenol Corporation |
| 0 | ||
| M28876/6B1P1N | Amphenol Corporation |
| 0 | |||
| M28876/9B11P5 | Amphenol Corporation |
| 0 | |||
| S1997F2887R34 | SOURIAU-SUNBANK |
| 0 | |||
| CP28876-150806-1-133 | SOURIAU-SUNBANK |
| 0 | |||
| CB28876-S2302 | SOURIAU-SUNBANK |
| 0 | |||
| 4214108-87 | SOURIAU-SUNBANK |
| 0 | |||
| 8877767 | SOURIAU-SUNBANK |
| 0 | |||
| S694-48-87R | SOURIAU-SUNBANK |
| 0 | |||
| M24308/8-7F | Amphenol Positronic |
| 0 | |||
| M24308/8-7F | Amphenol PCD |
| 0 | |||
| M28876/7B12P4 | Amphenol Corporation |
| 0 | |||
| 12311887-31 | SOURIAU-SUNBANK |
| 0 | |||
| 10069887-204 REV E | Amphenol Corporation |
| 0 | |||
| S1071-158-.87-12 | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | 5558872-1 | TE Connectivity | Modular Connectors / Ethernet Connectors RoHS : Compliant |
| 1,985 | |
| 788792-1 | TE Connectivity | D-Sub Connectors RoHS : Not Compliant |
| 429 | ||
| 8887 | Heyco | SCBS-1500 BLACK 100' ROLL |
| 414 | ||
| 1888870-1 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 165 | ||
| 10128887-118LF | Amphenol FCi | Cable Assembly |
| 143 | ||
| 1887103-3 | TE Connectivity | Relays RoHS : Compliant |
| 139 | ||
| 031-6887 | Amphenol RF | RF Connector TNC Straight Receptacle Jac |
| 79 | ||
| 5788793-1 | TE Connectivity | TE COMPONENT (REF 5788793-1) RoHS : Compliant |
| 57 | ||
| 1887213-3 | TE Connectivity | Relays RoHS : Compliant |
| 38 | ||
| 102TL2887-3D | Honeywell Sensing and Control | Switch RoHS : Compliant |
| 5 | ||
| 84120887 | HUBER+SUHNER | RF Component |
| 3 | ||
| M28876/6B1P1N | Glenair Inc | CONNECTOR |
| 2 | ||
| 6-1589488-7 | TE Connectivity | D-Sub Connectors RoHS : Not Compliant |
| 1 | ||
| 8-879946-5 | TE Connectivity | AMBOSS |
| 1 | ||
| 1708875-1 | TE Connectivity | Connectors |
| 1 | ||
 PUI | 12.88762 | 269,940 | ||||
| 12.88782 | 269,940 | |||||
| 12.88725 | 269,940 | |||||
| 12.88799 | 73,118 | |||||
| 12.88751 | 26,529 | |||||
| 12.88731 | 17,119 | |||||
| 12.88717 | 15,005 | |||||
| 12.88777 | 12,123 | |||||
| 12.88768 | 5,370 | |||||
| 12.88737 | 4,000 | |||||
| 12.88740 | 3,280 | |||||
| 12.88788 | 664 | |||||
| 12.88700 | 20 | |||||
| 12.88770 | 20 | |||||
| 12.88780 | 5 | |||||
 Richardson RFPD | AD7887WARMZ-RL | Analog Devices Inc | 2-Channel Single ADC SAR 125ksps 12-bit Serial Aut RoHS : Compliant |
| 0 | |
| 8875N-03 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| 552CG000887DG | Skyworks Solutions Inc | Oscillator VCXO 70MHz/ 140MHz ±20ppm (Stability) 1 RoHS : Compliant |
| 0 | ||
| 031-6887 | Amphenol Corporation | Conn TNC 0Hz to 11GHz 50Ohm Solder ST Flange Mount RoHS : Compliant |
| 0 | ||
| 11026887-00 | TE Connectivity | Precision NTC Glass Thermistor RoHS : Not Compliant |
| 0 | ||
| 30-F212PMA035M7-L887A79 | Vincotech | POWERIGBT TRANSISTOR RoHS : Compliant |
| 0 | ||
| 514PCC000887CAGR | Skyworks Solutions Inc | Differential Single Ended I2C Programmable Xo 0.1 RoHS : Compliant |
| 0 | ||
| AD7887ARZ | Analog Devices Inc | 2-Channel Single ADC SAR 125ksps 12-bit Serial 8-P RoHS : Compliant |
| 0 | ||
| AD7887BRZ-REEL | Analog Devices Inc | 2-Channel Single ADC SAR 125ksps 12-bit Serial 8-P RoHS : Compliant |
| 0 | ||
| 8875FMF3-03 | Spectrum Control | BIAS TEES, TYPE F (75 OHM ) UP TO 3 GHZ, 200 VOLTS RoHS : Compliant | 0 | |||
| 514CCC000887BAGR | Skyworks Solutions Inc | Oscillator XO 24MHz ±30ppm CMOS 52% 3.3V 6-Pin SMD RoHS : Compliant |
| 0 | ||
| LTM2887HY-5S#PBF | Analog Devices Inc | Digital Isolator Logic 6-CH 20Mbps 32-Pin BGA Tray RoHS : Compliant |
| 0 | ||
| 887046-1 | TE Connectivity | Conn Type F 0Hz to 1GHz 75Ohm Solder ST Thru-Hole RoHS : Not Compliant | 0 | |||
| SI5395K-A12887-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
| LTC3887IUJ#PBF | Analog Devices Inc | DC/DC Cntrlr Dual-OUT Step Down 1000kHz 40-Pin QFN RoHS : Compliant |
| 0 | ||
 Rutronik | RC1206FR-13887RL | YAGEO Corporation | RC1206 887R 1% 0,25W TK100 RoHS : Compliant |
| 4,680,000 | |
| RC0603FR-07887RL | YAGEO Corporation | RC0603 887R 1% 0,1W TK100 RoHS : Compliant |
| 485,000 | ||
| AC0603FR-07887RL | YAGEO Corporation | AC0603 887R 1% 0,1W AUTOMO RoHS : Compliant |
| 210,000 | ||
| RC1210FR-07887RL | YAGEO Corporation | RC1210 887R 1% 0,5W TK100 RoHS : Compliant |
| 80,000 | ||
| RC0805FR-07887RL | YAGEO Corporation | RC0805 887R 1% 0,125W TK100 RoHS : Compliant |
| 50,000 | ||
| RC0201FR-07887KL | YAGEO Corporation | RC0201 887K 1% 0,05W TK200 RoHS : Compliant |
| 30,000 | ||
| RC0402FR-07887KL | YAGEO Corporation | RC0402 887K 1% 0,063W TK100 RoHS : Compliant |
| 20,000 | ||
| RC1206FR-07887RL | YAGEO Corporation | RC1206 887R 1% 0,25W TK100 RoHS : Compliant |
| 20,000 | ||
| CSRV0204FTDV8871 | Viking Technology | MM0204 8,87K 1% 0,25W TK50 RoHS : Compliant |
| 18,000 | ||
| RK73H2ATTD8870F | KOA Speer Electronics Inc | RC0805 887R 1% 0,25W TK100 RoHS : Compliant |
| 10,000 | ||
| RC0402FR-07887RL | YAGEO Corporation | RC0402 887R 1% 0,063W TK100 RoHS : Compliant |
| 10,000 | ||
 Chip 1 Exchange | 12.88762 | Geyer Electronic E K | INSTOCK | 268,940 | ||
| 12.88782 | Geyer Electronic E K | INSTOCK | 268,940 | |||
| 218877-0062 | Molex | INSTOCK | 85,800 | |||
| 12.88799 | Geyer Electronic E K | INSTOCK | 65,118 | |||
| NCV887801D1R2G | onsemi | INSTOCK RoHS : Compliant | 27,943 | |||
| 1206S4F8873T5E | ROYAL | INSTOCK | 25,005 | |||
| 0402WGF8873TCE | ROYAL | INSTOCK | 24,440 | |||
| 12.88717 | Geyer Electronic E K | INSTOCK | 12,005 | |||
| 12.88731 | Geyer Electronic E K | INSTOCK | 7,119 | |||
| 12.88768 | Geyer Electronic E K | INSTOCK | 5,370 | |||
| 12.88737 | Geyer Electronic E K | INSTOCK | 4,000 | |||
| 12.8874 | Geyer Electronic E K | INSTOCK | 3,280 | |||
MCZ33887EK | Freescale Semiconductor | INSTOCK RoHS : Compliant | 100 | |||
| MCZ33887EK | INSTOCK | 100 | ||||
| 12.887 | Geyer Electronic E K | INSTOCK | 20 | |||
 Avnet Abacus | 188744-1 | TE Connectivity | Contact Socket Crimp ST Cable Mount (Alt: 188744-1) RoHS : Compliant | 200,000 | ||
| CRCW0402887KFKED | Vishay Intertechnologies | SMD Chip Resistor 887 kohm 1 100 mW 0402 1005 Metric Thick Film General Purpose - Tape and Reel (Alt: CRCW0402887KFKED) RoHS : Compliant | 180,000 | |||
| 5-1393788-7 | TE Connectivity | Relay Signal DPDT2CO 250VAC 12VDC Surface Mount (Alt: 5-1393788-7) RoHS : Compliant | 62,400 | |||
| CRCW0402887RFKED | Vishay Intertechnologies | SMD Chip Resistor 887 ohm 1 100 mW 0402 1005 Metric Thick Film General Purpose - Tape and Reel (Alt: CRCW0402887RFKED) RoHS : Compliant | 40,000 | |||
| 5034887 | YAGEO Corporation | SMD 0603 V Pt 1000 B (Alt: 5034887) RoHS : Compliant | 36,000 | |||
| 926887-3 | TE Connectivity | Contact PIN Crimp ST Cable Mount Strip (Alt: 926887-3) RoHS : Compliant | 15,000 | |||
| MMA02040C8871FB300 | Vishay Intertechnologies | - Tape and Reel (Alt: MMA02040C8871FB300) RoHS : Compliant | 9,000 | |||
| MMU01020C8872FB300 | Vishay Intertechnologies | - Tape and Reel (Alt: MMU01020C8872FB300) RoHS : Compliant | 9,000 | |||
| 152887 | TE Connectivity | Ring Tongue Terminal 1618AWG Tin Loose Piece (Alt: 152887) RoHS : Compliant | 3,975 | |||
| 955522887 | Molex | (Alt: 955522887) RoHS : Compliant | 1,116 | |||
| 1934887 | Phoenix Contact | Pluggable Terminal Block 5 mm 4 Ways 26 AWG 14 AWG 25 mm Screw (Alt: 1934887) RoHS : Compliant | 750 | |||
| 3026887 | Phoenix Contact | SK 20D SK20D (Alt: 3026887) RoHS : Compliant | 250 | |||
| B65887ER49 | TDK Corporation | Ferrite Core RM Core 422mm 302mm Power Applications (Alt: B65887E0000R049) RoHS : Compliant | 240 | |||
| M80-8871601 | Harwin | PCB Receptacle BoardtoBoard WiretoBoard 2 mm 2 Rows 16 Contacts Through Hole Mount (Alt: M80-8871601) RoHS : Not Compliant | 143 | |||
| 1887086 | Phoenix Contact | Dust Cap Cover Protective Cover Variosub 9 Way DSub Connectors Nylon Polyamide Body (Alt: 1887086) RoHS : Compliant | 15 | |||
Avnet Asia | ASP-227887-01 | Samtec Inc | ASP CUSTOM PRODUCTS (Alt: ASP-227887-01) RoHS : Compliant | 0 | ||
| 10158875-101LF | Amphenol Corporation | (Alt: 10158875-101LF) RoHS : Compliant | 0 | |||
| DDZ9688-7 | Diodes Incorporated | (Alt: DDZ9688-7) RoHS : Compliant | 0 | |||
| B39242B8879P810W05 | Qualcomm RFFE Filter Products | RFCB39242B8879P810W05 B40 SAW FILTER, TX (Alt: B39242B8879P810W05) RoHS : Compliant | 0 | |||
| SLG4BP48873V | Renesas Electronics Corporation | GPAK MIXED SIGNAL IC (Alt: SLG4BP48873V) RoHS : Compliant | 0 | |||
| WR04X8871FTR | Walsin Technology Corporation | (Alt: WR04X8871FTR) RoHS : Compliant | 0 | |||
| CRCW0201887KFNED | Vishay Intertechnologies | (Alt: CRCW0201887KFNED) RoHS : Compliant | 0 | |||
| RK73H1HRTTCM8872F | KOA Speer Electronics Inc | (Alt: RK73H1HRTTCM8872F) RoHS : Compliant | 0 | |||
| 5034887 | KEMET Corporation | (Alt: 5034887) RoHS : Compliant | 0 | |||
| 9-2176388-7 | TE Connectivity | SMD Chip Resistor, 100 Ohm, ? 0.1%, 400 mW, 1206 [3216 Metric], Thin Film, Anti-Sulfur Precision (Alt: 9-2176388-7) RoHS : Compliant | 0 | |||
| ERJ2RKF8873X | Panasonic Electronic Components | SMD Chip Resistor, 887 kohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film (Alt: ERJ2RKF8873X) RoHS : Compliant | 0 | |||
| B39262B8887L210 | Qualcomm RFFE Filter Products | (Alt: B39262B8887L210) RoHS : Compliant | 0 | |||
| 640388-7 | TE Connectivity | Conn Wire to Board HDR 7 POS 3.96mm Solder ST Thru-Hole (Alt: 640388-7) RoHS : Compliant | 0 | |||
| 1888781-1 | TE Connectivity | Connector Accessories Cage for QSFP Press Fit Tray (Alt: 1888781-1) RoHS : Compliant | 0 | |||
| 10188768-1019LF | Amphenol Corporation | HSBP,EXAMAX2 RAR 8*8 WITH SLOT CONTACT (Alt: 10188768-1019LF) RoHS : Compliant | 0 | |||
 Avnet Silica | NCV887103D1R2G | onsemi | NonSynchronous Boost Controller Automotive Grade (Alt: NCV887103D1R2G) RoHS : Compliant | 5,000 | ||
| AL5887JAZW52-13 | Diodes Incorporated | (Alt: AL5887JAZW52-13) RoHS : Compliant | 4,000 | |||
| AH1887-ZG-7 | Diodes Incorporated | Hall Effect Switch Unipolar 35 G 20 G 165 V to 33 V 5 Pins SOT553 (Alt: AH1887-ZG-7) RoHS : Compliant | 3,000 | |||
| NCV887001D1R2G | onsemi | NonSynchronous Boost Controller Automotive Grade (Alt: NCV887001D1R2G) RoHS : Compliant | 2,500 | |||
| PIC16F887-I/PT | Microchip Technology Inc | 8bit MCU PIC 20 MHz 14 KB 368 B 44 Pins TQFP (Alt: PIC16F887-I/PT) RoHS : Compliant | 960 | |||
| KSZ8873RLL | Microchip Technology Inc | (Alt: KSZ8873RLL) RoHS : Compliant | 480 | |||
| KSZ8873RLLI | Microchip Technology Inc | Ethernet Switch 3Port 100Mbps 64Pin LQFP Tray (Alt: KSZ8873RLLI) RoHS : Compliant | 480 | |||
| PIC16F887-E/PT | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 14KB Flash 25V33V5V 44Pin TQFP Tray (Alt: PIC16F887-E/PT) RoHS : Compliant | 160 | |||
| PIC16F18877-I/PT | Microchip Technology Inc | MCU 8Bit PIC16Fxx PIC RISC 56KB Flash 25V33V5V 44Pin TQFP Tray (Alt: PIC16F18877-I/PT) RoHS : Compliant | 160 | |||
| MT8870DS1 | Microchip Technology Inc | DTMF Receiver 475 to 525V 40 to 85 C SOIC18 (Alt: MT8870DS1) RoHS : Compliant | 0 | |||
| MT8870DN1 | Microchip Technology Inc | (Alt: MT8870DN1) RoHS : Compliant | 0 | |||
| 5962-88726113A | Microchip Technology Inc | 12 Bit Digital to Analog Converter 1 28LCC 1143x1143 (Alt: 5962-88726113A) RoHS : Compliant | 0 | |||
| PIC16F18875-I/PT | Microchip Technology Inc | MCU 8Bit PIC16Fxx PIC RISC 14KB Flash 25V33V5V 44Pin TQFP Tray (Alt: PIC16F18875-I/PT) RoHS : Compliant | 0 | |||
| PIC16F18877T-I/PT | Microchip Technology Inc | MCCPIC16F18877TIPT (Alt: PIC16F18877T-I/PT) RoHS : Compliant | 0 | |||
| MPQ8873GVE-0024-AEC1-Z | Monolithic Power Systems | QFN3436V 3A Continuous Output Current Full Temperature FourSwitch (Alt: MPQ8873GVE-0024-AEC1-Z) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AX7DAF1-688.7300T | Abracon Corporation | XTAL OSC XO 688.7300MHZ LVDS SMD RoHS : Compliant |
| 0 | |
| 33-3887-15-0300 | Calian |
| 0 | |||
| 603-38.88-7 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| WK8887AA1 | RAMXEED | WLAN BT Module |
| 0 | ||
| MP18871-A4CGSE-Z | Monolithic Power Systems | isolated half-bridge gate driver solution with up to a 0.5A or 4A source and sink peak RoHS : Compliant |
| 0 | ||
| TMJG4887GENL | Taoglas Antenna Solutions | RJ45 ICM, 1G Base-T, 1x1, Short Body, Down, 10 pin, THT, 3Wire+T, Shielded EMI Finger, LED, Industrial |
| 0 | ||
| 33-3887-00-1000 | Calian | GPS L1/L2+GLONASS G1/G2 + Galileo E1 + BeiDou B1/B2 |
| 0 | ||
 Chip-Germany GmbH | TSD-887 | Premier Magnetics | 225 | |||
 Component Electronics, Inc | MCR18EZHF8873 | ROHM Semiconductor | IN STOCK SHIP TODAY RoHS : Compliant |
| 20,000 | |
| MCR18EZHF8872 | ROHM Semiconductor | IN STOCK SHIP TODAY RoHS : Compliant |
| 15,000 | ||
| CR21A8873FT | IBS Electronics Inc | IN STOCK SHIP TODAY |
| 9,900 | ||
| MF25C8871FT | IBS Electronics Inc | IN STOCK SHIP TODAY |
| 5,000 | ||
| CRCW06038872FRT1 | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5,000 | ||
| RR0816P-8872-B-T5-92C | Susumu Co Ltd | IN STOCK SHIP TODAY |
| 1,700 | ||
| TNPW08058871BR75 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 1,300 | ||
| CMF-60-88.7R-1%T-1B14 | Vishay Dale | IN STOCK SHIP TODAY |
| 750 | ||
| MV8870BA | GPS | IN STOCK SHIP TODAY |
| 592 | ||
| ERJ-3EKF8873V | Panasonic Electronic Components | IN STOCK SHIP TODAY |
| 230 | ||
CM8870SI | California Micro Devices | IN STOCK SHIP TODAY RoHS : Not Compliant | 41 | |||
| 1588763-1 | TE Connectivity | IN STOCK SHIP TODAY | 30 | |||
| FDP8870 | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| 788792-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 7 | ||
| 46-288786 | G.E MEDICAL | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | 8887 | Heyco | SCBS-1500 BLACK 100' ROLL | 0 | ||
| 88738 | Pop Rivets | TAPD516BSLF12 S5C | 0 | |||
| 32887 | Pop Rivets | PTFO-1030-250 | 0 | |||
| 5887 | Heyco | 186-L-18-TIN-R/L | 0 | |||
| 10258871 | Pop Rivets | SSK63SSHR 5X1K | 0 | |||
| 1887-832-N | RAF Electronic Hardware | 0 | ||||
| 5887-F-250-105-140 | RAF Electronic Hardware | 0 | ||||
| 3887509TR-6FT | Essentra Components | THREADED ROD, 78-9 THREAD, 6 F | 0 | |||
| 62-0-8887-11 | Southco | 0 | ||||
| 30403887 | Essentra Components | CAM WITH STOPPER 12MM HEIGHT X | 0 | |||
| 1887-16 | HeliCoil | HAND INS TOOL TWINSERT M16X2 | 0 | |||
| 2288-7 | HeliCoil | 0 | ||||
| 1887-632-N | RAF Electronic Hardware | 0 | ||||
| 464887 | Essentra Components | 0 | ||||
| 3887509TR-8FT | Essentra Components | THREADED ROD, 78-9 THREAD, 8 F | 0 | |||
 EBV Elektronik | NCV887001D1R2G | onsemi | NonSynchronous Boost Controller Automotive Grade (Alt: NCV887001D1R2G) RoHS : Compliant | 5,000 | ||
| ZL88702LDG1 | Microchip Technology Inc | (Alt: ZL88702LDG1) RoHS : Compliant | 1,300 | |||
| 5962-8876801PA | Broadcom Limited | Optocoupler 3StateOUT DCIN 1CH 8Pin DIP (Alt: 5962-8876801PA) RoHS : Not Compliant | 800 | |||
| KSZ8873RLLI | Microchip Technology Inc | Ethernet Switch 3Port 100Mbps 64Pin LQFP Tray (Alt: KSZ8873RLLI) RoHS : Compliant | 160 | |||
| 5962-8876901PA | Broadcom Limited | Optocoupler LogicOut Three State DCIN 2CH 8Pin CDIP (Alt: 5962-8876901PA) RoHS : Not Compliant | 5 | |||
| MT8870DS1 | Microchip Technology Inc | DTMF Receiver 475 to 525V 40 to 85 C SOIC18 (Alt: MT8870DS1) RoHS : Compliant | 0 | |||
| MCZ33887EK | NXP Semiconductors | Integrated Hbridge with sleep mode (Alt: MCZ33887EK) RoHS : Compliant | 0 | |||
| ZL88701LDF1 | Microchip Technology Inc | (Alt: ZL88701LDF1) RoHS : Compliant | 0 | |||
| 5962-8876801PC | Broadcom Limited | Optocoupler LogicOut Three State DCIN 1CH 8Pin CDIP (Alt: 5962-8876801PC) RoHS : Compliant | 0 | |||
| 5962-88769022A | Broadcom Limited | Optocoupler LogicOut Three State DCIN 2CH 20Pin LCCC (Alt: 5962-88769022A) RoHS : Not Compliant | 0 | |||
| 5962-8874801XA | Microchip Technology Inc | BiDirectional TVS SMCJ (Alt: 5962-8874801XA) RoHS : Not Compliant | 0 | |||
| 5962-8876906KFC | Broadcom Limited | Optocoupler LogicOut Three State DCIN 4CH 16Pin CFPAK (Alt: 5962-8876906KFC) RoHS : Not Compliant | 0 | |||
| PIC16F18875-I/PT | Microchip Technology Inc | MCU 8Bit PIC16Fxx PIC RISC 14KB Flash 25V33V5V 44Pin TQFP Tray (Alt: PIC16F18875-I/PT) RoHS : Compliant | 0 | |||
| PIC16F18877T-I/PT | Microchip Technology Inc | MCCPIC16F18877TIPT (Alt: PIC16F18877T-I/PT) RoHS : Compliant | 0 | |||
| LAN8871T-V/PUAVAO | Microchip Technology Inc | 1000BASET1 RGMII PHY (Alt: LAN8871T-V/PUAVAO) RoHS : Compliant | 0 | |||
 ECCO | C10-737887-053 | Amphenol Industrial Operations |
| 19 | ||
 FDH Electronics | M28876/7B12P4 | Amphenol Fiber Systems International | Fiber Optic Con |
| 1 | |
| 8879K4 | Safran Electrical & Power UK | Switches | 0 | |||
| M28876/10-AE | Aptiv PLC | Connector Acc |
| 0 | ||
| M28876/1F2S6 | Aptiv PLC | Backshells & Ac |
| 0 | ||
| M28876/6B1P1N | Aptiv PLC | Fiber Optic Con RoHS : Unknown | 0 | |||
| M28876/7B12S5 | Aptiv PLC | Backshells & Ac |
| 0 | ||
| M28876/9B12S1 | Aptiv PLC | Connector Acc |
| 0 | ||
| 88727-09 | Honeywell Sensing and Control | Switches |
| 0 | ||
| 4TL887-8 | Honeywell Sensing and Control | Switches | 0 | |||
| M28876/12B12S3 | Aptiv PLC | Connector Acc |
| 0 | ||
| M28876/7B12P4 | Aptiv PLC | Backshells & Ac |
| 0 | ||
| M28876/7C11S1 | Aptiv PLC | Connector |
| 0 | ||
| M28876/7C21P3 | Aptiv PLC | Connector Acc |
| 0 | ||
| M28876/8B12P3 | Aptiv PLC | Backshells & Ac | 0 | |||
| M28876/9F13P5 | Aptiv PLC | Backshells & Ac |
| 0 | ||
 Flip Electronics | FDMA8878-F130 | onsemi | Stock, Ship Today RoHS : Compliant | 1,337,705 | ||
| FDD8874 | onsemi | Stock, Ship Today RoHS : Compliant |
| 82,500 | ||
| FDS8876-F40 | onsemi | Stock, Ship Today RoHS : Compliant |
| 27,500 | ||
| 4888722V20 | onsemi | Stock, Ship Today |
| 22,500 | ||
| FDC8878 | onsemi | Stock, Ship Today RoHS : Compliant |
| 15,401 | ||
| FDMA8878 | onsemi | Stock, Ship Today RoHS : Compliant |
| 12,063 | ||
| FDS8878-F123 | onsemi | Stock, Ship Today RoHS : Compliant |
| 10,000 | ||
| NCV887103D1R2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 10,000 | ||
| CG8879AMT | Infineon Technologies AG | Stock | 7,500 | |||
| NCV887102D1R2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 5,000 | ||
| FDS8878-G | onsemi | Stock, Ship Today |
| 3,430 | ||
| FDB8870-F085 | onsemi | Stock, Ship Today RoHS : Compliant |
| 783 | ||
| FDB8870 | onsemi | Stock RoHS : Compliant | 610 | |||
| BCM88772A1KFSBG | Broadcom Limited | Stock, Ship Today |
| 33 | ||
 Maritex | 188744-1 | TE Connectivity | Rectangular Connector Contacts; 188744-1; TE CONNECTIVITY; Tin; Crimp; 24 AWG; 28 AWG RoHS : Compliant |
| 133,009 | |
| WR04X8870FTL | Walsin Technology Corporation | Surface Mount Resistors; WR04X8870FTL; WALSIN; 887 ?; 1 %; Surface Mount; Yes RoHS : Compliant |
| 6,867 | ||
| DRV8872DDAR | Texas Instruments | Motor Drivers; DRV8872DDAR; TEXAS INSTRUMENTS; 8; 6.5 V; 1.7 mm; 45 V RoHS : Compliant |
| 2,607 | ||
| NCV887100D1R2G | onsemi | DC DC Converters; NCV887100D1R2G; ON SEMICONDUCTOR; 8; Boost; 1.5 mm; 1 RoHS : Compliant |
| 1,786 | ||
DRV8873SPWPR | Texas Instruments | Motor Drivers; DRV8873SPWPR; TEXAS INSTRUMENTS; 24; 4.4 mm; 7.8 mm; 1.2 mm RoHS : Compliant |
| 1,212 | ||
| DRV8876PWPR | Texas Instruments | Motor Drivers; DRV8876PWPR; TEXAS INSTRUMENTS; 16; 4.5 V; 37 V; 3.5 A RoHS : Compliant |
| 790 | ||
| FA10887_TINA-RS | LEDIL | Lens for LED high power; angle: 10 to 15 degrees FWHM; Number of LEDs: 1; Dimensions: round 16mm; Height: 9.7mm; meterial: PMMA; PC; Fastening: tape |
| 349 | ||
| WR08X8872FTL | Walsin Technology Corporation | Surface Mount Resistors; WR08X8872FTL; WALSIN; 88.7 k?; 1 %; Yes; Surface Mount RoHS : Compliant |
| 291 | ||
DRV8873HPWPRQ1 | Texas Instruments | Motor Drivers; DRV8873HPWPRQ1; TEXAS INSTRUMENTS; 24; 4.4 mm; 7.8 mm; 1.2 mm RoHS : Compliant |
| 134 | ||
| PIC16F887-I/PT | Microchip Technology Inc | Microcontrollers (MCU); PIC16F887-I/PT; MICROCHIP TECHNOLOGY; 368 B; FLASH; 35; 5.5 V RoHS : Compliant |
| 100 | ||
DRV8872DDARQ1 | Texas Instruments | Motor Drivers; DRV8872DDARQ1; TEXAS INSTRUMENTS; 8; 6.8 V; 45 V; 1.7 mm RoHS : Compliant |
| 40 | ||
| 5788792-1 | TE Connectivity | D-Sub Connectors; 5788792-1; TE CONNECTIVITY; D-Sub; Yes; Right Angle; 30.81 mm RoHS : Compliant |
| 26 | ||
| MC33887APVW | NXP Semiconductors | Motor Drivers; MC33887APVW; NXP SEMICONDUCTORS; 28 V; 5 V; 5 A; 20 RoHS : Compliant |
| 9 | ||
| AD7887ARZ | Analog Devices Inc | Integrated Circuit ;A/D Converter; CH:2; 125KSPS; 12bit; �2LSB; 2.5MHz; 2.75-5.25V; 2.75-5.25V; -40+125 deg.C; SMD; SO8 RoHS : Compliant |
| 4 | ||
| AD7887ARMZ-REEL7 | Analog Devices Inc | Analog-to-Digital Converters (ADC); AD7887ARMZ-REEL7; ANALOG DEVICES; 8; SPI; 5.25 V; 2.7 V RoHS : Compliant |
| 4 | ||
 Master Electronics | 788792-1 | TE Connectivity | 09 HTMSFL PLUG RA 318 (IN BL) RoHS : Not Compliant |
| 1,072 | |
| 8887 | GC Electronics | Chem-O-Jector RoHS : Compliant |
| 1 | ||
| 688701-000 | TE Connectivity | D-609-08CS2603 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 8-2176088-7 | TE Connectivity | Res Thin Film 0603 7.15K Ohm 0.1% 0.167W A±25ppm/A°C Pad SMD Medical T/R RoHS : Compliant |
| 0 | ||
| 887135-000 | TE Connectivity | TXR40BW90-1005AI MOQ Reduction RoHS : Compliant |
| 0 | ||
| 88741-9300 | Molex | Conn MicroCross Adapter RCP/PL 24/20 POS ST 1 Port MicroCross Bag RoHS : Compliant |
| 0 | ||
| 9-1614887-7 | TE Connectivity | Thin Film Resistor - SMD 0805 - 4.42 Kohm (+/-) 0.1% - 1/10 W - 100V - TCR (+/-) 25ppm/°C - -55°C to +155°C - Tape&Reel RoHS : Compliant |
| 0 | ||
| Z80887 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Female Sockets - 2 Position - Shell Size-Insert 24-9 - Bayonet Lock - Crimp Contacts. RoHS : Compliant |
| 0 | ||
| Z88799 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Male Pins - 5 Position - Shell Size-Insert 18-11 - Bayonet Lock - Crimp Contacts. RoHS : Compliant |
| 0 | ||
| SMA-Q0207FTDT887R | TE Connectivity | MELF SMA-Q 887R 1% 50PPM 0207 1W RoHS : Compliant |
| 0 | ||
| 1408874 | Phoenix Contact | FOC-M12-M12-GB02/2 RoHS : Compliant |
| 0 | ||
| 1206887 | Phoenix Contact | Accessories for CF 1000-1 5 and CF 1000-10 stripping and crimping devices - feeder bowl for 2.5 mm² and 4.0 mm² sleeves RoHS : Compliant |
| 0 | ||
| FFSD-20-S-28.87-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDSD-10-S-08.87-T-G | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ROB-11887 | SparkFun Electronics | SERVO - HITEC HS-85MG (MIC RoHS : Not Compliant |
| 0 | ||
 Neutron USA | 3504G3A887RFTDF | TE Connectivity | Thin Film Resistors - SMD 3504G 3A 887R 1% 1K RL RoHS : Compliant |
| 50 | |
| 2887700000 | Weidmüller Interface GmbH & Co. KG | Raspberry Pi Accessories UH20-RPI-EXT, U-Maker Box, Electronics housings black, Width: 120.4 mm RoHS : Compliant |
| 50 | ||
| 8871030000 | Weidmüller Interface GmbH & Co. KG | General Purpose Relays RCIKIT 24VDC 2CO LD RoHS : Compliant |
| 50 | ||
| 508-8745-504 | Dialight | Lamp Holders & Accessories Holder W/ collar Turret Terminals |
| 40 | ||
| 3240887 | Phoenix Contact | Terminal Block Tools & Accessories WP-G HF IP69K M40 BK RoHS : Compliant |
| 5 | ||
| 8870250000 | Weidmüller Interface GmbH & Co. KG | Industrial Relays RCI374AC4 RoHS : Compliant |
| 1 | ||
| 1428870000 | Weidmüller Interface GmbH & Co. KG | Heavy Duty Power Connectors HDC MHD 36 FC RoHS : Compliant |
| 1 | ||
| 2800887 | Phoenix Contact | Circuit Breakers CB TM2 10A M1 P RoHS : Compliant |
| 1 | ||
| AXG97887 | Axiom Manufacturing | AXIOM 10FT CAT6A BENDNFLEX CAB (BLACK) |
| 0 | ||
| AXG62995887/1 | Axiom Manufacturing | AXIOM 16GB DDR4-2133 UDIMM TAA COMP |
| 0 | ||
1424887 | Phoenix Contact | Sensor Cables / Actuator Cables SAC-5P-MR/ 2,0-547 SCO BK RoHS : Compliant |
| 0 | ||
| 1088872 | Phoenix Contact | Mngd Ethernet Switch, 4 RJ45 10/100/1000 Mbps, 2 SFP 100/1000 Mbps, 2 Combo 10/100/1000 Mbps, FL SWITCH 2504-2GC-2SFP RoHS : Compliant |
| 0 | ||
| 7887148 | RS Pro | Thermo attachment pad For Use With Thermocouple |
| 0 | ||
| 1887212-1 | TE Connectivity | Circular Connector XT484LC4 RoHS : Compliant |
| 0 | ||
| AXG94887 | Axiom Manufacturing | AXIOM MPO-MPO OM3 M/M FIBER CABLE 9M |
| 0 | ||
 Pasternack Enterprises US | PE34887LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to MMCX Plug Cable 24 Inch Length Using RG188 Coax, RoHS., Radio frequency assembly SMA male to MMCX plug cable 24 inch length using RG188 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to MMCX plug cable 24 inch length using RG188 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and MMCX cable connection on the other. Our SMA to MMCX cable assemblies have a male gender on end 1 and plug on end 2. This SMA to MMCX cable is a male to plug coax assembly, PE34887LF-24, can also be known as a SMA plug to MMCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to MMCX male cable assembly PE34887LF-24 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to MMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34887LF-24 can also be used in the other direction and will be MMCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MMCX plug cable 24 inch length using RG188 coax, RoHS. |
| 520 | |
| PE3W08875LF-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity SMA Male Right Angle to Reverse Polarity SMA Male Right Angle Cable 24 Inch Length Using RG400 Coax, LF Solder., Radio frequency assembly reverse polarity SMA male right angle to reverse polarity SMA male right angle cable 24 inch length using RG400 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA male right angle to reverse polarity SMA male right angle cable 24 inch length using RG400 coax, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle reverse polarity SMA cable connection on one end and right angle reverse polarity SMA cable connection on the other. Our right angle reverse polarity SMA to right angle reverse polarity SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W08875LF-24 can also be known as a right angle reverse polarity SMA plug to right angle reverse polarity SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to reverse polarity SMA plug cable assembly PE3W08875LF-24 is built with RG400 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency reverse polarity SMA right angle male to reverse polarity SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA reverse polarity right angle plug to SMA reverse polarity right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male right angle to reverse polarity SMA male right angle cable 24 inch length using RG400 coax, LF solder. |
| 281 | ||
| PE3C8875/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8875/GR, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8875/GR is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax. | 255 | |||
| PE3C8874/GY-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GY-36, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GY-36 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GY-36 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax. |
| 89 | ||
| PE3C5887-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Plenum N Male to SMA Male Low PIM Cable 50 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-50CM, can also be known as a low PIM N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-50CM can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM N type plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder. |
| 82 | ||
| PE3C5887-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum N Male to SMA Male Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This N type to SMA cable is a male to male coax assembly, PE3C5887-150CM, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-150CM can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder. |
| 82 | ||
| PE3C8875/BR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BR, RF Cable Type: Belden 1855A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-BR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-BR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/BR-72, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/BR-72 is built with Belden 1855A-BR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-BR coax. |
| 51 | ||
| PE3C8875/VL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-VL, RF Cable Type: Belden 1855A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-VL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-VL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/VL-120, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/VL-120 is built with Belden 1855A-VL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-VL coax. |
| 51 | ||
| PE3C8873/OR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-OR, RF Cable Type: Belden 1855A-OR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-OR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-OR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-OR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/OR-36, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/OR-36 is built with Belden 1855A-OR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-OR coax. |
| 44 | ||
| PE3C8873/BR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BR, RF Cable Type: Belden 1855A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-BR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-BR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/BR-12, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/BR-12 is built with Belden 1855A-BR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-BR coax. |
| 44 | ||
| PE3C2887-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Mini SMP Female Right Angle to SMA Male Cable 48 Inch Length Using PE-P047 Coax., Radio frequency assembly mini SMP female right angle to SMA male cable 48 inch length using PE-P047 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMA male cable 48 inch length using PE-P047 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and SMA cable connection on the other. Our right angle mini SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3C2887-48 can also be known as a right angle mini SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA plug cable assembly PE3C2887-48 is built with PE-P047 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12 GHz maximum frequency mini SMP right angle female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2887-48 can also be used in the other direction and will be SMA male to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMA male cable 48 inch length using PE-P047 coax. |
| 0 | ||
| PE3W18872 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. N Female to N Male Cable Using LMR-240 Coax. PE3W18872 is a N female to N male cable using LMR-240 coax. This Pasternack N female to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18872 N female to N male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE34488-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B100, RF Cable Type: PE-B100, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMB Plug to SMB Plug Cable 72 Inch Length Using PE-B100 Coax., Radio frequency assembly SMB plug to SMB plug cable 72 inch length using PE-B100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to SMB plug cable 72 inch length using PE-B100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and SMB cable connection on the other. Our SMB to SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE34488-72, can also be known as a SMB male to SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE34488-72 is built with PE-B100 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB plug to SMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMB male to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMB plug cable 72 inch length using PE-B100 coax. |
| 0 | ||
| PE3887LF-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to N Male Cable 6 Inch Length Using RG402 Coax, RoHS., Radio frequency assembly SMA male to N male cable 6 inch length using RG402 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 6 inch length using RG402 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to N type cable is a male to male coax assembly, PE3887LF-6, can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3887LF-6 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3887LF-6 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 6 inch length using RG402 coax, RoHS. |
| 0 | ||
| PE3C0887/HS | Pasternack Enterprises | 0 | ||||
 TE Connectivity | 170887-1 | TE Connectivity | SLEEVE DIA5 SHUR PLUG NAT Insulation Boot & Sleeve Product Type: Insulation Sleeve Terminal Orientation: Straight Primary Product Material: Vinyl Primary Product Color: Natural Packaging Method: Bag Insulation Sleeve Straight Vinyl Natural | Insulation Boots & Sleeve | Part Number: 170887-1 | Internal Number: 170887-1 | TE Connectivity RoHS : Compliant |
| 37,470 | |
| 5788796-3 | TE Connectivity | 09 HTMSFL ASSY RA 318 (IN, BL) Number of Positions: 9 Connector & Housing Type: Receptacle Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Receptacle Board-to-Board Board Mount | Part Number: 5788796-3 | Internal Number: 5788796-3 | 1 | TE Connectivity RoHS : Compliant |
| 3,428 | ||
| 5558872-1 | TE Connectivity | MJ,TE,4P,W/0 PNL STOPS Connector Profile: Standard Modular Jacks & Plugs Products: RJ Type Jacks & Plugs Connector Contact Density: Standard Modular Connector Style: Jack PCB Mount Orientation: Vertical Standard RJ Type Jacks & Plugs | Rj22 Connector | Part Number: 5558872-1 | Internal Number: 5558872-1 | Alias Number: A08646-000 | TE Connectivity RoHS : Compliant |
| 3,079 | ||
| RQ73C1E887RBTD | TE Connectivity | RQ 0402 887R 0.1% 10PPM 5K RL Resistance Value: 887 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 887 Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C1E887RBTD | Internal Number: 3-2176363-1 | TE Connectivity RoHS : Compliant |
| 3,050 | ||
| 5788794-1 | TE Connectivity | 25 HTMSFL PLUG RA 318 (IN,BL) Number of Positions: 25 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 3 D-Shaped Connector | 25 Plug Board-to-Board Board Mount | Part Number: 5788794-1 | Internal Number: 5788794-1 | 3 | TE Connectivity RoHS : Compliant |
| 1,569 | ||
| 640388-7 | TE Connectivity | 07P MTA156 HDR ASSY RN STR F/L PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 7 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 7 | PCB Header & Receptacle | Part Number: 640388-7 | Internal Number: 640388-7 | TE Connectivity RoHS : Compliant |
| 1,435 | ||
| RP73PF1J887RBTDF | TE Connectivity | RP 1J 0.166W 887R 0.1% 25PPM 1K RL Resistance Value: 887 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0603 Surface Mount Resistor | 887 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1J887RBTDF | Internal Number: 2176088-8 | TE Connectivity RoHS : Compliant |
| 976 | ||
| RQ73C1J887RBTD | TE Connectivity | RQ 0603 887R 0.1% 10PPM 5K RL Resistance Value: 887 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0603 Surface Mount Resistor | 887 Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C1J887RBTD | Internal Number: 3-2176370-1 | TE Connectivity RoHS : Compliant |
| 858 | ||
| 1888781-1 | TE Connectivity | Cage Assy Behind Bezel QSFP Pluggable Form Factor: QSFP+ Pluggable I/O Product Type: Cage Sealable: Yes Circuit Application: Signal Number of Ports: 1 QSFP+ Cage Signal | High Speed I/o | Part Number: 1888781-1 | Internal Number: 1888781-1 | TE Connectivity RoHS : Compliant |
| 605 | ||
| 5788792-1 | TE Connectivity | 09 HTMSFL PLUG RA 318 (IN,BL) Number of Positions: 9 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Plug Board-to-Board Board Mount | Part Number: 5788792-1 | Internal Number: 5788792-1 | TE Connectivity RoHS : Compliant |
| 532 | ||
| 8-87579-5 | TE Connectivity | 06 MODII HDR DRRA SHRD LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Wire-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 6 PCB Mount Header Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 8-87579-5 | Internal Number: 8-87579-5 | TE Connectivity RoHS : Compliant |
| 444 | ||
| 1-2372488-7 | TE Connectivity | D1100 HDR ASSY H 34P XBLACK PRE-TIN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 34 Number of Rows: 2 PCB Mount Header Right Angle Wire-to-Board 34 | Header Assembly: Wire-To-Board & 3A & Gold Or Tin Plated | Part Number: 1-2372488-7 | Internal Number: 1-2372488-7 | TE Connectivity RoHS : Compliant |
| 295 | ||
| 5748873-1 | TE Connectivity | AMP III PLUG 25P RA 590 THD IN Number of Positions: 25 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 3 D-Shaped Connector | 25 Plug Board-to-Board Board Mount | Part Number: 5748873-1 | Internal Number: 5748873-1 | TE Connectivity RoHS : Compliant |
| 110 | ||
| 5788799-1 | TE Connectivity | 15 HTMSFL ASSY RA 318 (SL,BL) Number of Positions: 15 Connector & Housing Type: Receptacle Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 2 D-Shaped Connector | 15 Receptacle Board-to-Board Board Mount | Part Number: 5788799-1 | Internal Number: 5788799-1 | 2 | TE Connectivity RoHS : Compliant |
| 29 | ||
| 5788793-1 | TE Connectivity | 09 HTMSFL PLUG RA 318 (SL,BL) Number of Positions: 9 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Plug Board-to-Board Board Mount | Part Number: 5788793-1 | Internal Number: 5788793-1 | TE Connectivity RoHS : Compliant |
| 20 | ||
 Teledyne HiRel | 5962-8872603LA | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | ||
| 5962-88724043A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10 OUTPUT AND-OR RoHS : Not Compliant | 0 | |||
| 5962-8872607LA | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-88726113A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 15 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-88735023A | Teledyne HiRel | PROM, ONE TIME, 2K X 8, REGISTERED, 35 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-88705013A | Teledyne HiRel | FLIP-FLOP, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-8871310RA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-88726083A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 10 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8872612LA | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8873503LA | Teledyne HiRel | PROM, ONE TIME, 2K X 8, REGISTERED, 35 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8873904QA | Teledyne HiRel | MULTIPLIER, 8 X 8 UNSIGNED MAGNITUDE, 50 NS MULTIPLY TIME RoHS : Not Compliant | 0 | |||
| 5962-8871306XA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-8871311RA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-88726093A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 15 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8873504LA | Teledyne HiRel | PROM, ONE TIME, 2K X 8, REGISTERED, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | AGCR2010-WK-8872FT | VENKEL LTD | Auto Grade Resistor;2010;3/4W;�100PPM;88.7K;�1% RoHS : Compliant | 0 | ||
| MELFC0102-RC-8873FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�50PPM;887K;�1% RoHS : Compliant | 0 | |||
| MELFC0204-TE-8871CT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�25PPM;8.87K;�0.25% RoHS : Compliant | 0 | |||
| MELFC0204-TZ-8871DT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�15PPM;8.87K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-ZZ-8871BT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�15PPM;8.87K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-VE-8872CT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�25PPM;88.7K;�0.25% RoHS : Compliant | 0 | |||
| MELFC0207-VN-8870FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�10PPM;887R;�1% RoHS : Compliant | 0 | |||
| MELFC0207-VP-8870BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�5PPM;887R;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-VZ-8872DT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�15PPM;88.7K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-XE-8873BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�25PPM;887K;�0.1% RoHS : Compliant | 0 | |||
| MELFM0204-TC-8870DT | VENKEL LTD | MELF Molded Thin Film CR;0204;1/4W;�50PPM;887R;�0.5% RoHS : Not Compliant | 0 | |||
| MELFM0204-ZC-8870BT | VENKEL LTD | MELF Molded Thin Film CR;0204;2/5W;�50PPM;887R;�0.1% RoHS : Not Compliant | 0 | |||
| MELFM0207-VC-8871DT | VENKEL LTD | MELF Molded Thin Film CR;0207;1/2W;�50PPM;8.87K;�0.5% RoHS : Not Compliant | 0 | |||
| TFCR2010-4W-K-8870FT-1K | VENKEL LTD | Thin Film CR;2010;1/4W;�100PPM;887R;�1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-C-8870CT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;887R;�0.25% RoHS : Compliant | 0 | |||
 Vyrian | 887689810 | Molex | Cable Assembly, 15 Conductor(s), 28AWG RoHS : Compliant | 13,217 | ||
| AD7887WARMZ-RL | Analog Devices Inc | ADC, Successive Approximation, 12-Bit, 1 Func, 2 Channel, Serial Access, CMOS, PDSO8 RoHS : Compliant | 8,829 | |||
5962-88700012A | Texas Instruments | Bus Driver, ALS Series, 1-Func, 8-Bit, Inverted Output, TTL, CQCC20 RoHS : Not Compliant | 8,548 | |||
| 5962-88769022A | Broadcom Limited | Logic IC Output Optocoupler, 2-Channel, 2-Element, 1500V Isolation, 5MBps RoHS : Not Compliant | 8,455 | |||
5962-8875901EX | Texas Instruments | D Flip-Flop, HCT Series, 1-Func, Positive Edge Triggered, 4-Bit, True Output, CMOS, CDIP16 | 7,508 | |||
| KFJ2887/512 | Kingston Technology Company | 7,113 | ||||
| NCV8871LVBGEVB | onsemi | 6,857 | ||||
| 5962-88760012A | Texas Instruments | Operational Amplifier, 2 Func, 300uV Offset-Max, BIPolar, CQCC20 RoHS : Not Compliant | 6,805 | |||
5962-88737012A | Texas Instruments | Bus Transceiver, ALS Series, 1-Func, 8-Bit, True Output, TTL, CQCC20 RoHS : Not Compliant | 6,475 | |||
| 5962-8874401EX | Texas Instruments | Line Driver, 2 Func, 2 Driver, BIPolar, CDIP16 | 6,205 | |||
| 5962-8876801PC | Broadcom Limited | Logic IC Output Optocoupler, 1-Channel, 1-Element, 1500V Isolation, 5MBps RoHS : Compliant | 6,017 | |||
| SYN38871 | Kingston Technology Company | 5,556 | ||||
| 5962-8875801CA | Texas Instruments | 4,961 | ||||
| 5962-8872607LA | Atmel Corporation | UV PLD, 25ns, 10-Cell, CMOS, CDIP24 RoHS : Not Compliant | 4,024 | |||
| 5962-00-374-8874 | Texas Instruments | 3,686 | ||||
 Waytek, Inc. | 131887-91 | General Cable Technologies Corporation | 16GA GXL Violet Cross-Link Automotive Wire XLPE -51C to 125C |
| 166,000 | |
| 7100163887 | 3M | 22-18GA Female Disconnect Red Nylon .250 X .032 Fully Insulated |
| 121,777 | ||
 Win Source Electronics | DRV8872DDA | Texas Instruments | IC MOTOR DRVR UNIPLR 8SO PWRPAD / Unipolar Motor Driver NMOS PWM 8-SO PowerPad RoHS : Compliant |
| 60,000 | |
| DRV8876PWPT | Texas Instruments | IC MOTOR DRIVER DC 5.5V 16HTSSOP / Unipolar Motor Driver NMOS PWM 16-HTSSOP RoHS : Compliant |
| 53,030 | ||
| FDC8878NL | onsemi |
| 25,050 | |||
| DDZ9688-7 | Diodes Incorporated | DIODE ZENER 4.7V 500MW SOD123 / Zener Diode Single 4.7V 5% 500mW 2-Pin SOD-123 T/R RoHS : Compliant |
| 21,000 | ||
| DRV8873SPWPT | Texas Instruments | IC MOTOR DRIVER DC 5.5V 24HTSSOP / Unipolar Motor Driver NMOS SPI 24-HTSSOP RoHS : Compliant |
| 12,860 | ||
| DRV8872DDARQ1 | Texas Instruments | IC MOTOR DRVR UNIPLR 8SO PWRPAD RoHS : Compliant |
| 10,000 | ||
| PIC16F18875-I/PT | Microchip Technology Inc | IC MCU 8BIT 14KB FLASH 44TQFP RoHS : Compliant |
| 8,000 | ||
| PIC16F18877T-I/PT | Microchip Technology Inc | IC MCU 8BIT 56KB FLASH 44TQFP RoHS : Compliant |
| 7,000 | ||
| ALC887-VD2-CG | Realtek Semiconductor |
| 6,829 | |||
| AX88796BLI | ASIX Electronics Corporation | Low-pin-count Non-PCI 8/16-bit 10/100M Fast Ethernet Controller / Ethernet CTLR Single Chip 10Mbps/100Mbps 1.8V/3.3V 64-Pin LQFP RoHS : Compliant |
| 4,500 | ||
| AD7887ARM-REEL | Analog Devices Inc | 2.7 V to 5.25 V, Micropower, 2-Channel, 125 kSPS, 12-Bit ADC in 8-Lead MSOP RoHS : Not Compliant |
| 4,000 | ||
| AD7887ARM | Analog Devices Inc | +2.7 V to +5.25 V, Micropower, 2-Channel, 125 kSPS, 12-Bit ADC in 8-Lead uSOIC | IC ADC 12BIT SAR 8MSOP RoHS : Not Compliant |
| 4,000 | ||
| KSZ8873RLLI | Microchip Technology Inc | IC ETHERNET SWITCH I2C/SPI / Ethernet Switch 10/100 Base-T/TX PHY I2C, SPI Interface RoHS : Compliant |
| 3,200 | ||
| DAC8871SPW | Texas Instruments | IC DAC 16BIT 1CH LP 16-TSSOP RoHS : Compliant |
| 2,000 | ||
| MT8870DS1 | Microsemi Corporation (now Microchip) | IC RECEIVER DTMF 18SOIC RoHS : Compliant |
| 601 | ||
 Wuhan P&S | FDD8874 | onsemi | N-Ch PowerTrench MOSFET 30V,116A,5.1m�� RoHS : Compliant |
| 350,000 | |
| NCV887740D1R2G | onsemi | Automotive Grade Start-Stop Non-Synchronous Boost Controller RoHS : Compliant |
| 2,500 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
German ▼ 
English
Chinese
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand