 |
Datenblatt-Suchmaschine für elektronische Bauteile |
|
|
Datenblatt-Suchmaschine für elektronische Bauteile |
|
887-P-R49 Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
 DigiKey | ERJ-8ENF8873V | Panasonic Electronic Components | RES SMD 887K OHM 1% 1/4W 1206 |
| 39,117 | |
| ERJ-8ENF8873V | Panasonic Electronic Components | RES SMD 887K OHM 1% 1/4W 1206 |
| 39,117 | ||
| ERJ-8ENF8873V | Panasonic Electronic Components | RES SMD 887K OHM 1% 1/4W 1206 |
| 39,117 | ||
| TAR03FTBM8872 | Viking Technology | RES SMD 88.7K OHM 1/6W 0603 |
| 5,000 | ||
| TAR03FTCM8871 | Viking Technology | RES SMD 8.87K OHM 1/6W 0603 |
| 5,000 | ||
| TAR03FTDM8870 | Viking Technology | RES SMD 887 OHM 1/6W 0603 |
| 5,000 | ||
| TAR05ATBP8872 | Viking Technology | RES SMD 88.7K OHM 1/5W 0805 |
| 5,000 | ||
| TAR05ATCP8871 | Viking Technology | RES SMD 8.87K OHM 1/5W 0805 |
| 5,000 | ||
| TAR05ATDP8870 | Viking Technology | RES SMD 887 OHM 1/5W 0805 |
| 5,000 | ||
| TAR06DTBU8871 | Viking Technology | RES SMD 8.87K OHM 1/2W 1206 |
| 5,000 | ||
| TAR06DTCU8870 | Viking Technology | RES SMD 887 OHM 1/2W 1206 |
| 5,000 | ||
| 887 | Keystone Electronics Corp | ROUND SPACER #6 NYLON 5/8" |
| 3,061 | ||
| 1TL887-2D | POWELL ELECTRONICS | SWITCH TOGGLE SPST 15A 125V |
| 29 | ||
| 887 | Memotronics | T3 1/4 12V 50W PG13 HALOGEN |
| 25 | ||
| 887 | Adafruit Industries | LED MOD COOL WHT 5M | 0 | |||
 Avnet Americas | RC0402FR-07887KL | YAGEO Corporation | SMD Chip Resistor, 887 kOhm, ? 1%, 63 mW, 0402 [1005 Metric], Thick Film, General Purpose, RC Series - Tape and Reel (Alt: RC0402FR-07887KL) RoHS : Compliant |
| 170,000 | |
| NRC04F8871TRF | NIC Components Corp | SMD Chip Resistor, 8.87 kohm, ? 1%, 63 mW, 0402 [1005 Metric], Thick Film, General Purpose - Tape and Reel (Alt: NRC04F8871TRF) RoHS : Compliant |
| 120,000 | ||
| ERJ-3EKF8872V | Panasonic Electronic Components | SMD Chip Resistor, 88.7 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thick Film - Tape and Reel (Alt: ERJ-3EKF8872V) RoHS : Compliant |
| 50,000 | ||
| 188746-1 | TE Connectivity | Contact SKT Crimp ST Cable Mount Strip - Tape and Reel (Alt: 188746-1) RoHS : Compliant |
| 40,000 | ||
| CR0402-FX-8870GLF | Bourns Inc | - Tape and Reel (Alt: CR0402-FX-8870GLF) RoHS : Compliant |
| 20,000 | ||
| ERJ-6ENF8872V | Panasonic Electronic Components | SMD Chip Resistor, 88.7 kohm, ? 1%, 125 mW, 0805 [2012 Metric], Thick Film - Tape and Reel (Alt: ERJ-6ENF8872V) RoHS : Compliant |
| 10,000 | ||
| 5788797-1 | TE Connectivity | D Sub Connector, Standard, Receptacle, AMPLIMITE HD-20, 9 Contacts, DE, Solder - Trays (Alt: 5788797-1) RoHS : Compliant |
| 2,768 | ||
| 2108877-1 | TE Connectivity | USB Connector, Micro USB Type B, USB 2.0, Receptacle, 5 Ways, Surface Mount, Right Angle - Tape and Reel (Alt: 2108877-1) RoHS : Compliant |
| 2,000 | ||
| 1-178288-7 | TE Connectivity | Conn Housing RCP 8 POS 3.81mm Crimp ST Cable Mount Bag - Bag (Alt: 1-178288-7) RoHS : Compliant |
| 971 | ||
| RNC60H8872DRB14 | Vishay Intertechnologies | - Bulk (Alt: RNC60H8872DRB14) RoHS : Not Compliant |
| 200 | ||
| 5962-8876901XA | Broadcom Limited | Optocoupler Logic-Out Three State DC-IN 2-CH 8-Pin CDIP SMD - Rail/Tube (Alt: 5962-8876901XA) RoHS : Not Compliant |
| 182 | ||
PIC16F887-I/P | Microchip Technology Inc | 8 Bit MCU, Flash, PIC16 Family PIC16F88x Series Microcontrollers, PIC16, 20 MHz, 14 KB, 40 Pins - Rail/Tube (Alt: PIC16F887-I/P) RoHS : Compliant |
| 177 | ||
| RNC50J8871BSBSL | Vishay Intertechnologies | Through Hole Resistor, 8.87 kohm, ERC RNC Series, 50 mW, ? 0.1%, Axial Leaded, 200 V, Metal Film - Bulk (Alt: RNC50J8871BSBSL) RoHS : Not Compliant |
| 150 | ||
PIC16F887-I/PT | Microchip Technology Inc | 8-bit MCU, PIC, 20 MHz, 14 KB, 368 B, 44 Pins, TQFP - Trays (Alt: PIC16F887-I/PT) RoHS : Compliant |
| 76 | ||
| 5788794-1 | TE Connectivity | - Trays (Alt: 5788794-1) RoHS : Compliant |
| 44 | ||
 Newark | RK73H1ETTP8870F | KOA Speer Electronics Inc | RES, 887R, 0.1W, 75V, THICK FILM, 0402; RoHS : Compliant |
| 50,684 | |
| RK73H1ETTP8870F | KOA Speer Electronics Inc | RES, 887R, 0.1W, 75V, THICK FILM, 0402; RoHS : Compliant |
| 50,684 | ||
| 188744-1 | TE Connectivity | CONTACT, 24AWG, SOCKET, CRIMP; RoHS : Compliant |
| 39,005 | ||
| 188744-1 | TE Connectivity | CONTACT, CRIMP, RECEPTACLE, 28-24AWG; RoHS : Compliant |
| 20,000 | ||
| MCMR04X8870FTL | SPC Multicomp | RES, 887R, 1%, 0.0625W, 0402, CERAMIC; RoHS : Compliant |
| 8,720 | ||
| MCMR04X8870FTL | SPC Multicomp | RES, 887R, 1%, 0.0625W, 0402, CERAMIC; RoHS : Compliant |
| 8,720 | ||
| MAX8875EUK33+T | Analog Devices Inc | LINEAR REGULATOR, FIXED, 150MA, SOT-23-5; RoHS : Compliant |
| 2,500 | ||
| 88761 002100 | Belden Inc | CBL, MULTIPAIR, SHIELDED, 1.0, 22AWG; RoHS : Compliant |
| 703 | ||
| 2508873-1 | TE Connectivity | RF CONN, SMA PLUG, 50 OHM, CABLE; RoHS : Compliant |
| 481 | ||
| 218876-0064 | Molex | MEZZ CONN, RCPT, 6POS, 2ROW, 0.35MM; RoHS : Compliant |
| 323 | ||
| 1887213-4 | TE Connectivity | POWER RELAY, DPDT, 8A, 240VAC, SOCKET; RoHS : Compliant |
| 78 | ||
| 789887-01 | NI | MULTIFUNCTION I/O DEVICE, USB-6421; RoHS : Not Compliant |
| 14 | ||
| DS17887-5+ | Analog Devices Inc | RTC W/ NV SRAM, 8KB, EDIP-24; RoHS : Compliant |
| 11 | ||
| 63825-8875 | Molex | HAND CRIMP TOOL LOCATOR, TERMINAL; (Alternate Part Number: 887191517285 RoHS : Not Compliant |
| 9 | ||
| T0051388799 | Weller Hand Tools GmbH | SOLDER, 96.5/3/0.5, 217 DEG, 0.8MM, 250G; (Alternate Part Number: 4003019434442 RoHS : Compliant |
| 6 | ||
 NXP Semiconductors | KIT33887EKEVBE | NXP Semiconductors | Evaluation Kit - MC33887EK, H-Bridge, 120mOhm RDSON Typical with Sleep Mode and Current Sense, RoHS : Not Compliant |
| 39 | |
 RS | 88732-8702 (887-3287-02) | Molex | CABLE ASSEMBLY 28AWG 5 POS USB TO 5 POSUSB M-M SOLDER-SOLDER BAG, 88740 SERIES |
| 751 | |
| 88732-9200 (887-3292-00) | Molex | CABLE ASSEMBLY, USB TYPE-A, USB TYPE-B, 4 COND ROUND CBL, 6.86FT., 28 AWG, SHLD |
| 27 | ||
| 2170887 (2170887/328) | Lapp Group | ETHERLINE CAT5 HYBRID CABLE, 22AWG/2PR+16AWG/4C, HALOGENFREE, GREEN |
| 6 | ||
| XT484LB2 (1887212-3) | TE Connectivity | XT SERIES SHRACK, INTERFACE RELAY DPDT 8A 12 VDC LED/PD&TB |
| 5 | ||
| BCC0887 (BCC A315-0000-20-063-PX05A5-050) | Balluff Inc | CONNECTOR/CABLE, MALE 7/8 IN. , PUR, 5.00 M |
| 3 | ||
| 1113887 | RS Pro | SPDT PUSH BUTTON SWITCH 19MM IP67 FLAT ROUND PANEL MOUNT 250VAC GREEN LATCH |
| 2 | ||
| LS2TP30-900Q88 (73549) | Banner Engineering Corp | LIGHT CURTAIN PAIR, 30 MM X 900 MM, 48 BEAMS, 24 VDC, EZ-SCREEN TYPE 2 SERIES |
| 2 | ||
| 88761 002100 | Belden Inc | MULTICONDUCTOR CABLE, 1PR/22AWG, 7X30, TC, FEP INS, FOIL, RED FEP JKT, CMP |
| 1 | ||
| 7038887 (7038887/328) | Lapp Group | UNITRONIC SENSOR FD CONT.FLEX CABLE, 22AWG/5C, SHIELDED, PUR, BLACK |
| 1 | ||
| SLSP14-600Q88 (72382) | Banner Engineering Corp | EZ-SCREEN LS LIGHT CURTAIN, 2 PNP, OSSD, 8 PIN EURO QD, BEAM SPACING 14 MM |
| 1 | ||
| SLSP30-1200Q88 (72394) | Banner Engineering Corp | EZ-SCREEN LS LIGHT CURTAIN, 2 PNP, OSSD, 8 PIN EURO QD, BEAM SPACING 30 MM |
| 1 | ||
| SDE5-V1-FP-Q6-P-M8 (542887) | Festo | PRESSURE SENSOR, 0 TO -1 BAR, PUSH-IN PORTS 6MM OD TUBE, PNP OUT, 3 PIN M8 PLUG |
| 1 | ||
| 887 | Adafruit Industries | COOL WHITE LED WEATHERPROOF FLEXI-STRIP 60 LED - (1 M) |
| 0 | ||
| 887 | Keystone Electronics Corp | SPACER, 1/4 ROUND, CLEAR HOLE, LENGTH .625, HOLE SIZE 6, NYLON 6/6 |
| 0 | ||
| 887 | RACO | 4-11/16" COVER - 1.594 20AMP RECEPTACLE |
| 0 | ||
 Microchip Technology Inc | LAN88730AMR-C-V01 | Microchip Technology Inc | Small footprint MII/RMII 10/100 Ethernet Transceiver for Automotive applications, VQFN, Projected EOL: 2041-07-13 RoHS : Compliant |
| 25,000 | |
| LAN88730AM-C-V01 | Microchip Technology Inc | Small footprint MII/RMII 10/100 Ethernet Transceiver for Automotive applications, VQFN, Projected EOL: 2041-07-13 RoHS : Compliant |
| 19,110 | ||
| LAN8871T-V/PUAVAO | Microchip Technology Inc | 1000BASE-T1 RGMII PHY, VQFN, Projected EOL: 2051-07-08 RoHS : Compliant |
| 11,000 | ||
| LAN8872-I/PUA | Microchip Technology Inc | 1000BASE-T1 SGMII PHY, VQFN, Projected EOL: 2051-07-02 RoHS : Compliant |
| 4,400 | ||
| PIC16F18876-E/MV | Microchip Technology Inc | 28KB Flash, 2KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, UQFN, Projected EOL: 2046-08-09 RoHS : Compliant |
| 3,577 | ||
| PIC16F18877T-E/MVVAO | Microchip Technology Inc | 56KB Flash, 4KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, UQFN, Projected EOL: 2046-08-07 RoHS : Compliant |
| 3,300 | ||
| PIC16LF18877-E/PT | Microchip Technology Inc | 56KB Flash, 4KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, TQFP, Projected EOL: 2046-05-13 RoHS : Compliant |
| 2,880 | ||
| PIC16F18877-E/ML | Microchip Technology Inc | 56KB Flash, 4KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, QFN, Projected EOL: 2046-05-13 RoHS : Compliant |
| 1,490 | ||
| PIC16LF18877-I/MV | Microchip Technology Inc | 56KB Flash, 4KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, UQFN, Projected EOL: 2046-05-13 RoHS : Compliant |
| 1,465 | ||
| PIC16F18876-E/PT | Microchip Technology Inc | 28KB Flash, 2KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, TQFP, Projected EOL: 2046-08-09 RoHS : Compliant |
| 641 | ||
| KSZ8873MMLI | Microchip Technology Inc | 3-Port 10/100 Switch w/ 2x MII, LQFP, Projected EOL: 2036-02-09 RoHS : Compliant |
| 349 | ||
| PIC16F18875-I/MV | Microchip Technology Inc | 14KB, 1KB RAM, 256 EE, 36 I/O, DSM, ADC w/MathPak, WWDT, CRC/SCAN, CIPs, UQFN, Projected EOL: 2040-10-26 RoHS : Compliant |
| 53 | ||
| KSZ8873RLLI | Microchip Technology Inc | 3-Port 10/100 Switch w/ 1x RMII, LQFP, Projected EOL: 2036-02-09 RoHS : Compliant |
| 27 | ||
| PIC16F18875-I/P | Microchip Technology Inc | 14KB, 1KB RAM, 256 EE, 36 I/O, DSM, ADC w/MathPak, WWDT, CRC/SCAN, CIPs, PDIP, Projected EOL: 2040-10-26 RoHS : Compliant |
| 9 | ||
| PIC16F887-E/P | Microchip Technology Inc | 40 PIN, 14 KB ENH FLASH, 368 RAM, 36 I/O, PB FREE, PDIP, Projected EOL: 2035-10-27 RoHS : Compliant |
| 1 | ||
 Rochester Electronics | TFA9887UK/N1,023 | NXP Semiconductors | Audio Amplifier, 1 Func, PBGA29 RoHS : Compliant |
| 15,100 | |
AD9887KS-100 | Analog Devices Inc | Consumer Circuit, CMOS, PQFP160 RoHS : Not Compliant |
| 10,795 | ||
AD7887BR-REEL7 | Analog Devices Inc | Micropower, 2-Channel, 125 kSPS, 12-Bit ADC RoHS : Not Compliant |
| 3,950 | ||
| LTM2887HY-5S#PBF | Analog Devices Inc | Digital Isolators SPI 30kV/µs 32-BGA Tray RoHS : Compliant |
| 4,813 | ||
| MAX6887AETE+ | Analog Devices Inc | MAX6887 - Hex/Quad, Power-Supply Supervisory Circuits RoHS : Compliant |
| 633 | ||
5962-8873701RA | Texas Instruments | Bus Transceiver, ALS Series, 8-Func, 8-Bit, True Output, TTL, CDIP20 RoHS : Not Compliant |
| 3 | ||
5962-8872701RA | Texas Instruments | Bus Transceiver, ALS Series, 8-Func, 8-Bit, Inverted Output, TTL, CDIP20 RoHS : Not Compliant |
| 64 | ||
ISL88716IP826Z | Intersil Corporation | Voltage Supervisor/Reset IC, Adjustable, 1 Channel, +2.63V, PDIP8 RoHS : Compliant |
| 782 | ||
MAX6887BETE+ | Maxim Integrated Products | Voltage Supervisor/Reset IC, Adjustable, 6 Channel, BICMOS RoHS : Compliant |
| 60 | ||
| MAX8875EUK26 | Maxim Integrated Products | MAX8875 150mA, Low-Dropout Linear Regulator With Power-Ok Output RoHS : Not Compliant |
| 2,282 | ||
| MAX8875EUK33+ | Maxim Integrated Products | Fixed Positive LDO Regulator, 3.3V, 0.22V Dropout, PDSO5 RoHS : Compliant |
| 21,351 | ||
MAX8878EUK25+T | Maxim Integrated Products | Fixed Positive LDO Regulator, 2.5V, 0.12V Dropout, CMOS, PDSO5 RoHS : Compliant |
| 1,483 | ||
| MAX8878EZK28-T | Maxim Integrated Products | 150mA Linear Low-Noise, Low-Dropout Regulator RoHS : Not Compliant |
| 5,000 | ||
| MAX8878EZK29 | Maxim Integrated Products | MAX8878 Low-Noise, Low-Dropout, 150mA Linear Regulator With 2982 Pinout RoHS : Not Compliant |
| 2,646 | ||
| MAX8887EZK18 | Maxim Integrated Products | Fixed Positive LDO Regulator, 1.8V, BICMOS, PDSO5 RoHS : Not Compliant |
| 3,357 | ||
 Sager | 887 | Keystone Electronics Corp | Standoffs & Spacers 5/8 6-32 NYL SPACER |
| 0 | |
| 788796-3 | TE Connectivity | D-Sub Standard Connectors 09 HTMSFL ASSY RA 318 (IN BL) RoHS : Compliant |
| 0 | ||
| LMLK1-1RLS4R-30887-50 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 0887479400 | Molex | Molex | 0 | |||
| 0887621410 | Molex | USB Cables / IEEE 1394 Cables | 0 | |||
| 0887628800 | Molex | Molex | 0 | |||
| 0887899323 | Molex | HDMI, Displayport & DVI Connectors | 0 | |||
| 1TL887-2D | Honeywell Sensing and Control / MICRO SWITCH | Toggle Switches SEALED OI |
| 0 | ||
| 2-805887-1 | TE Connectivity | Crimpers / Crimping Tools ANVIL-COMBINATION | 0 | |||
| 20010887-00 | TE Connectivity | SPEED SEN DSD 2520.76 P6HRW-F250G |
| 0 | ||
| 229-4-21887-1 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 3-805887-6 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMB | 0 | |||
| 2488713-1 | TE Connectivity | CONN G SNA 1.6MM D-SUB 50 PIN 1PK RoHS : Compliant |
| 0 | ||
| 2508873-1 | TE Connectivity | SMA PLUG STR CRIMP RG-58, 141 LEAD FREE RoHS : Compliant |
| 0 | ||
| 1628876 | Phoenix Contact | Circular Metric Connectors M23-7EP198A8024 RoHS : Compliant |
| 0 | ||
 TME | 188744-1 | TE Connectivity | Connector: wire-board; socket; female; HE; Inom: 3A; straight; 15mΩ RoHS : Compliant |
| 140,000 | |
| 887 | Keystone Electronics Corp | Spacer sleeve; cylindrical; polyamide; L: 15.9mm; Øout: 6.4mm |
| 2,490 | ||
| 1887491 | Bossard Group | Washer; round; h=0.5mm; M3,5; D=8mm; steel; Plating: zinc; DIN 125A |
| 1,600 | ||
| 3-1393788-7 | TE Connectivity | Relay: electromagnetic; Ucoil: 24VDC; DPDT; 2A; 0.5A/125VAC; P2 RoHS : Compliant |
| 699 | ||
| 52887 | HELUKABEL | Wire; H05Z-K; stranded; Cu; 0.75mm2; LSZH; grey; 300V,500V; 100m RoHS : Compliant |
| 200 | ||
| 1TL887-2D | Honeywell Sensing and Control | Switch: toggle; SPST; ON-OFF; Leads: screw terminals; TL; -65÷71°C |
| 17 | ||
| R-11887-3 | TE Connectivity | R-11887-3 |
| 1 | ||
| 28876 | PROXXON | Drill bit-kit; for metal; high speed steel; 6pcs. |
| 1 | ||
| ERJP06F8873V | Panasonic Electronic Components | Resistor: thick film; 887kΩ; 0805; 500mW; ±1%; ERJP06F RoHS : Compliant |
| 0 | ||
| ERJPC6D8870V | Panasonic Electronic Components | Resistor: thick film; 887Ω; SMD; 0805; 250mW; ±0.5%; ERJPC6D |
| 0 | ||
| RCA1206887KFKEA | Vishay Intertechnologies | Resistor: thick film; 887kΩ; 1206; 250mW; ±1%; 200V; -55÷155°C RoHS : Compliant |
| 0 | ||
| 14138870 | WIKA Instrument LP | Meter: temperature; analogue,bimetal; 0÷120°C; Probe l: 100mm |
| 0 | ||
| 1828870000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; OMNIMATE; 10.5A; 400V RoHS : Compliant |
| 0 | ||
| 1887530000 | Weidmüller Interface GmbH & Co. KG | Connector: terminal block; OMNIMATE; 16A; 320V; PIN: 12; angled 45° RoHS : Compliant |
| 0 | ||
| RK73H1ETTP8870F | KOA Speer Electronics Inc | Resistor: thick film; 887Ω; SMD; 0402; 100mW; ±1%; RK73H; 75V RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | MCR01SMQPF8873 | ROHM Semiconductor | 1005（0402）尺寸 大功率保证型 方形贴片电阻器（符合AEC-Q200标准） |
| 40,000 | |
| MCR01SMQPF8872 | ROHM Semiconductor | 1005（0402）尺寸 大功率保证型 方形贴片电阻器（符合AEC-Q200标准） |
| 20,000 | ||
| MCR01SMQPF8871 | ROHM Semiconductor | 1005（0402）尺寸 大功率保证型 方形贴片电阻器（符合AEC-Q200标准） RoHS : Unknown |
| 20,000 | ||
| LTR18EZPF8870 | ROHM Semiconductor | High Power Chip Resistors <Wide Terminal Type> RoHS : Compliant |
| 15,000 | ||
ESR18EZPF8870 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 15,000 | ||
| KTR18EZPF8870 | ROHM Semiconductor | High Voltage Resistance Chip Resistors RoHS : Compliant |
| 15,000 | ||
| MP8878GMJT-001B-Z | Monolithic Power Systems | 6,244 | ||||
DRV8870DDAR | Texas Instruments | IC DRIVER DC MOTOR 3.6A 8SOIC RoHS : Compliant | 5,000 | |||
| SDR03EZPF8870 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 5,000 | ||
DRV8874PWPR | Texas Instruments | RoHS : Compliant | 3,000 | |||
| NCV887740D1R2G | onsemi | IC REG CTRLR BOOST 8SOIC RoHS : Compliant | 2,600 | |||
| MCR10PZPZF8871 | ROHM Semiconductor |
| 400 | |||
DRV8876NPWPT | Texas Instruments | RoHS : Compliant | 324 | |||
DAC8871SBPW | Texas Instruments | DAC8871SBPW , 16 位-Bit DAC, SPI, Microwire接口, 16针 TSSOP封装 RoHS : Compliant | 103 | |||
| BD8876FV-E2 | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
 ComSIT USA | 887 | KEYSTONE ELECTRONICS CORP | AVAILABLE EU | 618 | ||
| LTR18EZPF8870 | ROHM Semiconductor | AVAILABLE EU RoHS : Compliant | 2,778,750 | |||
| FDS8870 | onsemi | AVAILABLE EU RoHS : Compliant | 1,595 | |||
| RK73H2BTTD8870F | KOA Speer Electronics Inc | AVAILABLE EU RoHS : Compliant | 34 | |||
| 8870 | WEBER PRECISION GRAPHICS | AVAILABLE EU | 24 | |||
DRV8874QPWPRQ1 | Texas Instruments | AVAILABLE EU RoHS : Compliant | 2,779 | |||
| DRV8874QPWPRQ1 | Texas Instruments | AVAILABLE EU RoHS : Compliant | 1,853 | |||
ComSIT USA | MAX8877EUK33T | Maxim Integrated Products | LOW-NOISE, LOW-DROPOUT, 150MILLIAMP LINEAR REGULATOR WITH 2982 PINOUT Fixed Positive LDO Regulator, 3.3V, 0.12V Dropout, CMOS, PDSO5 RoHS : Not Compliant | 8,500 | ||
| GR8875NRKAG | Grenergy Opto Inc | Electronic Component RoHS : Compliant | 6,330 | |||
| U2510SK6164DISME887 | ZMDI | Electronic Component RoHS : Not Compliant | 6,020 | |||
| LNG887618000MHZ | Nihon Dempa Kogyo Co Ltd | Electronic Component RoHS : Compliant | 5,000 | |||
| C0805C683K5RAC90887025 | KEMET Corporation | SURFACE MOUNT MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.068uF, Surface Mount, 0805 RoHS : Not Compliant | 4,000 | |||
| 74479887222A | Adolf Wuerth Gmbh & Co Kg | WE-PMI POWER MULTILAYER INDUCTOR General Purpose Inductor, 2.2uH, 20%, 1 Element, SMD, 1008 RoHS : Compliant | 2,525 | |||
| PMB8876X21G | Intel Corporation | Electronic Component RoHS : Compliant | 1,032 | |||
| RC0402FR07887RL | YAGEO Corporation | Electronic Component RoHS : Not Compliant | 506 | |||
| LFXTAL015887BULK | IQD Frequency Products | Parallel - Fundamental Quartz Crystal, 3.6864MHz Nom RoHS : Compliant | 450 | |||
| AD7887BRZ | Analog Devices Inc | ADC, Successive Approximation, 12-Bit, 1 Func, 2 Channel, Serial, Parallel, Word Access, CMOS, PDSO8 RoHS : Compliant | 449 | |||
| DRX8872CPLA1 | TDK Micronas GmbH | COFDM DEMODULATOR/FEC Consumer Circuit, PQFP80 RoHS : Not Compliant | 357 | |||
| UPD78F0887GKAGAJAX | Renesas Electronics Corporation | 8-BIT SINGLE-CHIP MICROCONTROLLER Microcontroller, 8-Bit, FLASH, 20MHz, CMOS, PQFP64 RoHS : Compliant | 341 | |||
| AX88772LF | ASIX Electronics Corporation | LAN Controller, CMOS, PQFP128 RoHS : Compliant | 183 | |||
| BGE887BO | Philips Semiconductors | OPTICAL RECEIVER MODULE Receiver, 1290nm Min, 1600nm Max, Panel Mount RoHS : Not Compliant | 55 | |||
| DS12887 | Dallas Semiconductor | REAL-TIME CLOCK Real Time Clock, Non-Volatile, 1 Timer(s), CMOS, PDIP24 RoHS : Not Compliant | 37 | |||
 Interstate Connecting Components | PV-692887-F06 | Amphenol Industrial Solar Technologies | H4+ SOLAR 10 AWG FEMALE SOLID CONTACT |
| 1,025 | |
| 3-1393788-7 | TE Connectivity | V23079B1205B301 RoHS : Compliant |
| 381 | ||
| 887 | Keystone Electronics Corp | CLEAR HOLE SPACER NYLON |
| 354 | ||
| 788796-3 | TE Connectivity | 09 HTMSFL ASSY RA 318 (IN, BL) RoHS : Compliant |
| 0 | ||
| 095-0088-7116=MCEM1-12 | TE Connectivity | 095-0088-7116=MCEM1-128SRA | 0 | |||
| 20010887-00 | TE Connectivity | SPEED SEN DSD 2520.76 P6HRW-F2 | 0 | |||
| 348-8749-000 | ITT Interconnect Solutions | 348-8749-000 | 0 | |||
| 237-0887-002 | ITT Interconnect Solutions | RING-POTTING KJ-8N | 0 | |||
| 248-8723-241 | ITT Interconnect Solutions | 248-8723-241 | 0 | |||
| 2488713-1 | TE Connectivity | CONN G SNA 1.6MM D-SUB 50 PIN RoHS : Compliant | 0 | |||
| 2508873-1 | TE Connectivity | SMA PLUG STR CRIMP RG-58, 141 RoHS : Compliant | 0 | |||
| 348-8732-241 | ITT Interconnect Solutions | 348-8732-241 | 0 | |||
| 188744-1 | TE Connectivity | CONTACT REC HE14 COSI TIN PLAT RoHS : Compliant |
| 0 | ||
| SA85005887M2 | SOURIAU-SUNBANK | J3804 | 0 | |||
| 058-8765-000 | ITT Interconnect Solutions | 588765000 | 0 | |||
 NexGen Digital | DRV8876PWPR | Texas Instruments | RoHS : Compliant | 232,772 | ||
| CRCW0603887KFKEA | Vishay Huntington | 30,261 | ||||
| RK73H1JTTD8873F | KOA Speer Electronics Inc | RoHS : Compliant | 25,000 | |||
DRV8872DDAR | Texas Instruments | RoHS : Compliant | 10,000 | |||
GRM1887U1H101JZ01D | Murata Manufacturing Co Ltd | RoHS : Compliant | 7,997 | |||
| PIC16F18875-I/P | Microchip Technology Inc | RoHS : Compliant | 2,073 | |||
| ERJ-3EKF8871V | Panasonic Electronic Components | 1,651 | ||||
| ERA3AEB8871V | Panasonic Electronic Components | RoHS : Compliant | 741 | |||
| 120887528 | Jite Connectors Inc | 596 | ||||
| FDC8878 | onsemi | RoHS : Compliant | 434 | |||
| 640388-7 | TE Connectivity | RoHS : Compliant | 92 | |||
| RN731JTTD8871B25 | KOA Speer Electronics Inc | RoHS : Compliant | 17 | |||
| RC0402FR-07887KL | YAGEO Corporation | RoHS : Compliant | 13 | |||
| 1658871-1 | TE Connectivity | RoHS : Compliant | 6 | |||
| 5962-8874601UA | Microsemi FPGA & SoC (now Microchip) | 6 | ||||
 PEI Genesis | S694-418-87R | SOURIAU-SUNBANK |
| 0 | ||
| M28876/15-FB | Amphenol Corporation |
| 0 | |||
| M28876/29B2 | Amphenol Corporation |
| 0 | |||
| M28876/7B12P5 | Amphenol Corporation |
| 0 | |||
| H2218877-C2308W | SOURIAU-SUNBANK |
| 0 | |||
| CB28876-S1301 | SOURIAU-SUNBANK |
| 0 | |||
| CR28876-130401-2 | SOURIAU-SUNBANK |
| 0 | |||
| CB28876-R1301 | SOURIAU-SUNBANK |
| 0 | |||
| CB28876-S1101 | SOURIAU-SUNBANK |
| 0 | |||
| CP28876-110206-1 | SOURIAU-SUNBANK |
| 0 | |||
| CP28876-231806-1-133 | SOURIAU-SUNBANK |
| 0 | |||
| 710038-87 | SOURIAU-SUNBANK |
| 0 | |||
| M28876/1F1S3 | Amphenol Corporation |
| 0 | |||
| CR28876-110201-1 | SOURIAU-SUNBANK |
| 0 | |||
| 1135887G4 | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | 5788797-1 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 782 | |
| 1438887-3 | TE Connectivity | Connectors RoHS : Compliant |
| 660 | ||
| 1TL887-2D | Honeywell Sensing and Control | Military Grade Toggle Switch |
| 252 | ||
| 5788799-1 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 211 | ||
| 1887213-4 | TE Connectivity | Relays RoHS : Compliant |
| 164 | ||
| RJE4W4887441 | Amphenol Corporation | Connector |
| 119 | ||
| 5788797-2 | TE Connectivity | TE COMPONENT (REF 5788797-2) RoHS : Compliant |
| 86 | ||
| 1887202-6 | TE Connectivity | Relays RoHS : Compliant |
| 83 | ||
| M28876/8B12P4 | Amphenol Fiber Systems International | PLG, 45° BS, SH13, K4, 4CH P INS, .305-. |
| 23 | ||
| M28876/9B12P1 | Amphenol Fiber Systems International | MULTI CHANNEL CONNECTOR |
| 18 | ||
| 638875-000 | TE Connectivity | CABLE-PROT PART (TE REF 638875-000) RoHS : Compliant |
| 9 | ||
| 1887201-7 | TE Connectivity | Relays RoHS : Compliant |
| 7 | ||
| R-11887-3 | TE Connectivity | SENSOR R-11887-3 |
| 1 | ||
| 5-1803188-7 | TE Connectivity | CRIMPER, WIRE F RoHS : Compliant |
| 1 | ||
| 8-879202-1 | TE Connectivity | AMBOSS |
| 1 | ||
 PUI | 12.88718 | 81,106 | ||||
| 12.88733 | 73,118 | |||||
| 12.88779 | 56,953 | |||||
| 12.88791 | 33,000 | |||||
| 12.88722 | 25,930 | |||||
| 12.88752 | 17,680 | |||||
| 12.88777 | 12,123 | |||||
| 12.88740 | 3,280 | |||||
| 12.88763 | 500 | |||||
| 12.88738 | 480 | |||||
| 12.88742 | 300 | |||||
| 12.88709 | 250 | |||||
| 12.88765 | 10 | |||||
| 12.88754 | 10 | |||||
| 12.88759 | 4 | |||||
 Chip 1 Exchange | 188744-1 | TE Connectivity | INSTOCK RoHS : Compliant | 338,000 | ||
| 12.88791 | Geyer Electronic E K | INSTOCK | 34,000 | |||
| 0603SAF887JT5E | ROYAL | INSTOCK | 24,960 | |||
| 7278870001- | TE Connectivity | INSTOCK | 22,100 | |||
| 12.8875 | Geyer Electronic E K | INSTOCK | 11,065 | |||
| RM04FTN8870 | INSTOCK | 9,712 | ||||
| RM04FTN8870 | TA-I Technology Co Ltd | INSTOCK RoHS : Compliant | 4,163 | |||
| GRM18871E104KA01D | Murata Manufacturing Co Ltd | INSTOCK | 647 | |||
| 12.88738 | Geyer Electronic E K | INSTOCK | 480 | |||
CM8870CPI | California Micro Devices | INSTOCK | 21 | |||
| 12.88765 | Geyer Electronic E K | INSTOCK | 10 | |||
| 26887 | INSTOCK | 9 | ||||
| 1D50887-1 | INSTOCK | 9 | ||||
DS17887-5+ | Maxim Integrated Products | INSTOCK RoHS : Compliant | 2 | |||
| ALC887-VD2-CG | Realtek Semiconductor | INSTOCK | 2 | |||
 Avnet Abacus | 188744-1 | TE Connectivity | Contact Socket Crimp ST Cable Mount (Alt: 188744-1) RoHS : Compliant | 200,000 | ||
| CRCW0402887KFKED | Vishay Intertechnologies | SMD Chip Resistor 887 kohm 1 100 mW 0402 1005 Metric Thick Film General Purpose - Tape and Reel (Alt: CRCW0402887KFKED) RoHS : Compliant | 180,000 | |||
| 5034887 | YAGEO Corporation | SMD 0603 V Pt 1000 B (Alt: 5034887) RoHS : Compliant | 36,000 | |||
| 955522887 | Molex | (Alt: 955522887) RoHS : Compliant | 21,952 | |||
| 926887-3 | TE Connectivity | Contact PIN Crimp ST Cable Mount Strip (Alt: 926887-3) RoHS : Compliant | 15,000 | |||
| MMA02040C8871FB300 | Vishay Intertechnologies | - Tape and Reel (Alt: MMA02040C8871FB300) RoHS : Compliant | 9,000 | |||
| MMU01020C8871FB300 | Vishay Intertechnologies | - Tape and Reel (Alt: MMU01020C8871FB300) RoHS : Compliant | 6,000 | |||
| RN73C2A887RBTD | TE Connectivity | SMD Chip Resistor 887 Ohm 01 100 mW 0805 2012 Metric Thin Film (Alt: 1676452-3) RoHS : Compliant | 5,000 | |||
| 1-968879-1 | TE Connectivity | Conn Housing RCP 70 POS Crimp ST Cable Mount (Alt: 1-968879-1) RoHS : Compliant | 3,828 | |||
| 2108877-1 | TE Connectivity | USB Connector Micro USB Type B USB 20 Receptacle 5 Ways Surface Mount Right Angle - Tape and Reel (Alt: 2108877-1) RoHS : Compliant | 2,000 | |||
| 955522887 | Molex | (Alt: 955522887) RoHS : Compliant | 1,116 | |||
| 1934887 | Phoenix Contact | Pluggable Terminal Block 5 mm 4 Ways 26 AWG 14 AWG 25 mm Screw (Alt: 1934887) RoHS : Compliant | 750 | |||
| RJSGE-488-7411 | Amphenol Corporation | Conn Modular Jack Receptacle 8 POS Press Fit RA Through Hole 32 Terminal 4 Port Tray (Alt: RJSGE-488-7411) RoHS : Compliant | 330 | |||
| 3026887 | Phoenix Contact | SK 20D SK20D (Alt: 3026887) RoHS : Compliant | 250 | |||
| B65887ER49 | TDK Corporation | Ferrite Core RM Core 422mm 302mm Power Applications (Alt: B65887E0000R049) RoHS : Compliant | 240 | |||
Avnet Asia | SFDMA8878 | onsemi | (Alt: SFDMA8878) RoHS : Compliant | 0 | ||
| 2088701142 | Molex | HFM 4PORT CABLE ASS?Y (Alt: 2088701142) RoHS : Compliant | 0 | |||
| 5034887 | KEMET Corporation | (Alt: 5034887) RoHS : Compliant | 0 | |||
| ERJ1GNF8872C | Panasonic Electronic Components | SMD Chip Resistor, 88.7 kohm, ? 1%, 50 mW, 0201 [0603 Metric], Thick Film (Alt: ERJ1GNF8872C) RoHS : Compliant | 0 | |||
| 5788797-1 | TE Connectivity | D Sub Connector, Standard, Receptacle, AMPLIMITE HD-20, 9 Contacts, DE, Solder (Alt: 5788797-1) RoHS : Compliant | 0 | |||
| B39262B8870L210 | Qualcomm RFFE Filter Products | (Alt: B39262B8870L210) RoHS : Compliant | 0 | |||
| PA2887NLT | Pulse Electronics Corporation | (Alt: PA2887NLT) RoHS : Compliant | 0 | |||
| 10188769-10132ALF | Amphenol Corporation | (Alt: 10188769-10132ALF) RoHS : Compliant | 0 | |||
| A18877-01-SIR | Qnity Laird | TPUTTY 607MF,13KG,1GAL STEEL, UNIT G (Alt: A18877-01-SIR) RoHS : Compliant | 0 | |||
| ERA3AEB8870V | Panasonic Electronic Components | SMD Chip Resistor, 887 ohm, ? 0.1%, 100 mW, 0603 [1608 Metric], Metal Film (Thin Film) (Alt: ERA3AEB8870V) RoHS : Compliant | 0 | |||
| 9-2176388-7 | TE Connectivity | SMD Chip Resistor, 100 Ohm, ? 0.1%, 400 mW, 1206 [3216 Metric], Thin Film, Anti-Sulfur Precision (Alt: 9-2176388-7) RoHS : Compliant | 0 | |||
| 10188769-10130ALF | Amphenol Corporation | Power Film Capacitor, 0.1 uF, 650 V, 1.6 kV, ? 10%, Double Metallized PP, Radial Box - 2 Pin, Through Hole (Alt: 10188769-10130ALF) RoHS : Compliant | 0 | |||
| ERJ3EKF8870V | Panasonic Electronic Components | SMD Chip Resistor, 887 ohm, ? 1%, 100 mW, 0603 [1608 Metric], Thick Film (Alt: ERJ3EKF8870V) RoHS : Compliant | 0 | |||
| ERJU02F8872X | Panasonic Electronic Components | SMD Chip Resistor, 88.7 kohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film, Anti-Sulfur (Alt: ERJU02F8872X) RoHS : Compliant | 0 | |||
| B39242B8879P810S05 | Qualcomm RFFE Filter Products | (Alt: B39242B8879P810S05) RoHS : Compliant | 0 | |||
 Avnet Silica | NCV887103D1R2G | onsemi | NonSynchronous Boost Controller Automotive Grade (Alt: NCV887103D1R2G) RoHS : Compliant | 5,000 | ||
| AL5887JAZW52-13 | Diodes Incorporated | (Alt: AL5887JAZW52-13) RoHS : Compliant | 4,000 | |||
| AH1887-ZG-7 | Diodes Incorporated | Hall Effect Switch Unipolar 35 G 20 G 165 V to 33 V 5 Pins SOT553 (Alt: AH1887-ZG-7) RoHS : Compliant | 3,000 | |||
| NCV887001D1R2G | onsemi | NonSynchronous Boost Controller Automotive Grade (Alt: NCV887001D1R2G) RoHS : Compliant | 2,500 | |||
| PIC16F887-I/PT | Microchip Technology Inc | 8bit MCU PIC 20 MHz 14 KB 368 B 44 Pins TQFP (Alt: PIC16F887-I/PT) RoHS : Compliant | 960 | |||
| KSZ8873RLL | Microchip Technology Inc | (Alt: KSZ8873RLL) RoHS : Compliant | 480 | |||
| KSZ8873RLLI | Microchip Technology Inc | Ethernet Switch 3Port 100Mbps 64Pin LQFP Tray (Alt: KSZ8873RLLI) RoHS : Compliant | 480 | |||
| PIC16F887-E/PT | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 14KB Flash 25V33V5V 44Pin TQFP Tray (Alt: PIC16F887-E/PT) RoHS : Compliant | 160 | |||
PIC16F18877-I/PT | Microchip Technology Inc | MCU 8Bit PIC16Fxx PIC RISC 56KB Flash 25V33V5V 44Pin TQFP Tray (Alt: PIC16F18877-I/PT) RoHS : Compliant | 160 | |||
| KSZ8873MMLI | Microchip Technology Inc | 3PORT 10100 SWITCH W 2X MII (Alt: KSZ8873MMLI) RoHS : Compliant | 0 | |||
| ACT88760-104T | Qorvo | (Alt: ACT88760-104T) RoHS : Compliant | 0 | |||
| FA10887_TINA-RS | LEDIL | Lens With White Color And Round Style (Alt: FA10887_TINA-RS) RoHS : Compliant | 0 | |||
| LAN88730AMR-C-V01 | Microchip Technology Inc | (Alt: LAN88730AMR-C-V01) RoHS : Compliant | 0 | |||
| PIC16F18875T-E/MV | Microchip Technology Inc | FullFeatured 28Pin Microcontrollers (Alt: PIC16F18875T-E/MV) RoHS : Compliant | 0 | |||
| PIC16LF18875-I/PT | Microchip Technology Inc | MCU 8Bit PIC16Fxx PIC RISC 14KB Flash 25V33V 44Pin TQFP Tray (Alt: PIC16LF18875-I/PT) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | 33-3887-15-0300 | Calian |
| 0 | ||
| 603-38.88-7 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| WK8887AA1 | RAMXEED | WLAN BT Module |
| 0 | ||
AX7DAF1-688.7300T | Abracon Corporation | XTAL OSC XO 688.7300MHZ LVDS SMD RoHS : Compliant |
| 0 | ||
| MP18871-A4CGSE-Z | Monolithic Power Systems | isolated half-bridge gate driver solution with up to a 0.5A or 4A source and sink peak RoHS : Compliant |
| 0 | ||
| TMJG4887GENL | Taoglas Antenna Solutions | RJ45 ICM, 1G Base-T, 1x1, Short Body, Down, 10 pin, THT, 3Wire+T, Shielded EMI Finger, LED, Industrial |
| 0 | ||
| 33-3887-00-1000 | Calian | GPS L1/L2+GLONASS G1/G2 + Galileo E1 + BeiDou B1/B2 |
| 0 | ||
 DB Roberts | 09688-72619 | Avdel | HEXSERT INS M6 LP ST CR3 N | 0 | ||
| 5887-F-250-105-140 | RAF Electronic Hardware | 0 | ||||
| RP-348-348-870 | SHEREX FASTENING SO | 0 | ||||
| 2887 | Heyco | OCB 437 WHITE | 0 | |||
| 1887-632-N | RAF Electronic Hardware | 0 | ||||
| 3887509TR-8FT | Essentra Components | THREADED ROD, 78-9 THREAD, 8 F | 0 | |||
| 20597887 | Essentra Components | 1X11 BSPGAS THREADED PLUGHDPE | 0 | |||
| 464887 | Essentra Components | 0 | ||||
| 2288-7 | HeliCoil | 0 | ||||
| 1887-1032-A | RAF Electronic Hardware | 0 | ||||
| 09688-70619 | Avdel | HEXSERT INS M6 LP ST CR3 | 0 | |||
| 30403887 | Essentra Components | CAM WITH STOPPER 12MM HEIGHT X | 0 | |||
| 1887-832-N | RAF Electronic Hardware | 0 | ||||
| SPL56887 | Spiralock | M4X0.7 SPL 4STFL T10 B | 0 | |||
| 20571887 | Essentra Components | 20MM ID X 20MM L FLANGED CAPTP | 0 | |||
 EBV Elektronik | NCV887001D1R2G | onsemi | NonSynchronous Boost Controller Automotive Grade (Alt: NCV887001D1R2G) RoHS : Compliant | 5,000 | ||
| ZL88702LDG1 | Microchip Technology Inc | (Alt: ZL88702LDG1) RoHS : Compliant | 1,300 | |||
| 5962-8876801PA | Broadcom Limited | Optocoupler 3StateOUT DCIN 1CH 8Pin DIP (Alt: 5962-8876801PA) RoHS : Not Compliant | 800 | |||
| KSZ8873RLLI | Microchip Technology Inc | Ethernet Switch 3Port 100Mbps 64Pin LQFP Tray (Alt: KSZ8873RLLI) RoHS : Compliant | 160 | |||
| 5962-8876901PA | Broadcom Limited | Optocoupler LogicOut Three State DCIN 2CH 8Pin CDIP (Alt: 5962-8876901PA) RoHS : Not Compliant | 5 | |||
| KSZ8873MMLI | Microchip Technology Inc | 3PORT 10100 SWITCH W 2X MII (Alt: KSZ8873MMLI) RoHS : Compliant | 0 | |||
| LAN8872-I/PUA | Microchip Technology Inc | 1000BASET1 SGMII PHY (Alt: LAN8872-I/PUA) RoHS : Compliant | 0 | |||
| 5962-8876903FC | Broadcom Limited | Optocoupler LogicOut Three State DCIN 4CH 16Pin CFPAK (Alt: 5962-8876903FC) RoHS : Compliant | 0 | |||
| 5962-8876802KPC | Broadcom Limited | Optocoupler LogicOut Three State DCIN 1CH 8Pin CDIP (Alt: 5962-8876802KPC) RoHS : Compliant | 0 | |||
| FA10887_TINA-RS | LEDIL | Lens With White Color And Round Style (Alt: FA10887_TINA-RS) RoHS : Compliant | 0 | |||
PIC16F887T-I/ML | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 14KB Flash 25V33V5V 44Pin QFN EP TR (Alt: PIC16F887T-I/ML) RoHS : Compliant | 0 | |||
| PIC16F18875-I/MV | Microchip Technology Inc | UQFN 14KB Flash 1KB RAM 256B EE 10b ADC2 DAC Comp PWM CWG SMT HLT WWDT SCANCRC ZCD PPS EUSART 2xS (Alt: PIC16F18875-I/MV) RoHS : Compliant | 0 | |||
| LAN88730AMR-C-V01 | Microchip Technology Inc | (Alt: LAN88730AMR-C-V01) RoHS : Compliant | 0 | |||
| PIC16LF18875-I/PT | Microchip Technology Inc | MCU 8Bit PIC16Fxx PIC RISC 14KB Flash 25V33V 44Pin TQFP Tray (Alt: PIC16LF18875-I/PT) RoHS : Compliant | 0 | |||
| PIC16F18877T-I/MV | Microchip Technology Inc | MCU 8Bit PIC16F18877 PIC RISC 56KB Flash 18V to 55V 40Pin UQFN TR (Alt: PIC16F18877T-I/MV) RoHS : Compliant | 0 | |||
 ECCO | C10-737887-053 | Amphenol Industrial Operations |
| 19 | ||
 Flip Electronics | FDMA8878-F130 | onsemi | Stock, Ship Today RoHS : Compliant | 1,337,705 | ||
| FDD8874 | onsemi | Stock, Ship Today RoHS : Compliant | 82,500 | |||
| FDS8876-F40 | onsemi | Stock, Ship Today RoHS : Compliant | 27,500 | |||
| 4888722V20 | onsemi | Stock, Ship Today | 22,500 | |||
| FDC8878 | onsemi | Stock, Ship Today RoHS : Compliant | 15,401 | |||
| FDMA8878 | onsemi | Stock, Ship Today RoHS : Compliant | 12,063 | |||
| FDS8878-F123 | onsemi | Stock, Ship Today RoHS : Compliant | 10,000 | |||
| NCV887103D1R2G | onsemi | Stock, Ship Today RoHS : Compliant | 10,000 | |||
| CG8879AMT | Infineon Technologies AG | Stock | 7,500 | |||
| NCV887102D1R2G | onsemi | Stock, Ship Today RoHS : Compliant | 5,000 | |||
| FDS8878-G | onsemi | Stock, Ship Today | 3,430 | |||
| FDB8870-F085 | onsemi | Stock, Ship Today RoHS : Compliant | 783 | |||
| FDB8870 | onsemi | Stock RoHS : Compliant | 610 | |||
| BCM88772A1KFSBG | Broadcom Limited | Stock, Ship Today | 33 | |||
 Master Electronics | ERJ-8ENF8873V | Panasonic Electronic Components | Res Thick Film 1206 887K Ohm 1% 0.25W(1/4W) ±100ppm/°C Pad SMD Automotive T/R RoHS : Compliant |
| 50,000 | |
| 3-1393788-7 | TE Connectivity | Signal Relay - 2 form C - Bistable 2 coils - Contacts: AgNi +Au 2A 250VAC - Coil: 24VDC 4114 ohm - PCB Thru Hole RoHS : Compliant |
| 3,050 | ||
| 1TL887-2D | Honeywell Sensing and Control | MICRO SWITCH™ Toggle Switches: TL Series Single Pole Single Throw (SPST) 2 Position (Off - On) Screw Terminals Gold-Plated Contacts Locking Lever (Locked Out Of Center Position) RoHS : Compliant |
| 48 | ||
| 788796-3 | TE Connectivity | 09 HTMSFL ASSY RA 318 (IN BL) MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| ERJ-PA2F8871X | Panasonic Electronic Components | Res SMD 8.87 Kohm 1% 1/5W 0402 RoHS : Compliant |
| 0 | ||
| ERJ-S1DD8873U | Panasonic Electronic Components | 2010 ANTI-SULFU RoHS : Compliant |
| 0 | ||
| ERJ-U01F8871C | Panasonic Electronic Components | Anti-Sulfur Thick Film Resistor - 8.87 Kohm - ±1% - 0.05W - 0201 - -55°C to +125°C - Tape&Reel RoHS : Compliant |
| 0 | ||
| ERJ-U03D8870V | Panasonic Electronic Components | Anti-Sulfur Thick Film Resistor - 887 ohm - ±0.5% - 0.1W - 0603 - -55°C to +155°C - AEC-Q200 - Tape&Reel RoHS : Compliant |
| 0 | ||
| ERJ-U12F8873U | Panasonic Electronic Components | Anti-Sulfur Thick Film Resistor - 887 Kohm - ±1% - 0.75W - 1812 - -55°C to +155°C - AEC-Q200 - Tape&Reel RoHS : Compliant |
| 0 | ||
| ERJ-U14F8871U | Panasonic Electronic Components | Anti-Sulfur Thick Film Resistor - 8.87 Kohm - ±1% - 0.5W - 1210 - -55°C to +155°C - AEC-Q200 - Tape&Reel RoHS : Compliant |
| 0 | ||
| ERJ-UP6F8871V | Panasonic Electronic Components | Thick Film Chip Resistor - 8.87 kOhms ±1% - 1/2W - SMD 0805 - Anti Sulfurated - Tape&Reel RoHS : Compliant |
| 0 | ||
| R-11887-3 | TE Connectivity | RTDSTRPC210427.2.188TF RoHS : Compliant |
| 0 | ||
| 2-805887-1 | TE Connectivity | ANVIL-COMBINATION RoHS : Not Compliant |
| 0 | ||
| 20010887-00 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3-805887-6 | TE Connectivity | ANVIL COMB RoHS : Not Compliant |
| 0 | ||
 Neutron USA | 88732-8802 | Molex | USB 2.0 Cable, USB A Male to MINI-B Male, 1.8m BLACK, Shielded RoHS : Compliant |
| 50 | |
| 1688722 | Phoenix Contact | D-SUB gender changer, Adapter, D-Sub 9P F To D-Sub 9P F, shell size 1, VS-09-GC-BU/BU RoHS : Compliant |
| 50 | ||
| 508-8745-504 | Dialight | Lamp Holders & Accessories Holder W/ collar Turret Terminals |
| 40 | ||
| 1628875 | Phoenix Contact | Circular Metric Connectors M23-7EP198A80DN RoHS : Compliant |
| 14 | ||
| 50988761 | WIKA Instrument LP | Wika Instruments 50988761 Pressure gauge;analog;lower mount;213.54 2.5 3000PSI 1/4 L |
| 4 | ||
| 2478870000 | Weidmüller Interface GmbH & Co. KG | Circuit Breakers MCB 489 2P D 6A ACDC |
| 4 | ||
| 1526887 | Phoenix Contact | Specialized Cables IPD PL 5P2,5 M A0,5 F PVC GY RoHS : Compliant |
| 2 | ||
| 1419887 | Phoenix Contact | Contact insert module, Male RJ45 8p8c, IDC Term, 48V 1A, HC-M-RJ45-08-M RoHS : Compliant |
| 0 | ||
| 4XB0G88715-AX | Axiom Manufacturing | Axiom Enterprise - Hard drive - 6 TB - hot-swap - 3.5" LFF - SAS 12Gb/s - 7200 rpm - buffer: 128 MB |
| 0 | ||
| 1828875 | RS Pro | USB Cable Male Mini 2.0 Type A-Male Mini 2.0 Type B, 1m, Beige PVC Sheath |
| 0 | ||
| 108873241-AO | AddOn Networks | AddOn Avaya/Nortel 108873241 Compatible TAA Compliant 1000Base-SX SFP Transceiver (MMF, 850nm, 550m, LC) |
| 0 | ||
| 1788758 | Phoenix Contact | DIN Rail Terminal Blocks MSTBVK2.5/5-G-5.08 RoHS : Compliant |
| 0 | ||
| 3240887 | Phoenix Contact | Terminal Block Tools & Accessories WP-G HF IP69K M40 BK RoHS : Compliant |
| 0 | ||
| 49Y7887-AO | AddOn Networks | AddOn IBM® 49Y7887 Compatible TAA Compliant 40GBase-CU QSFP+ to 4xSFP+ Direct Attach Cable (Passive Twinax, 3m) |
| 0 | ||
| 1738872 | Phoenix Contact | Pluggable Terminal Blocks 9 Pos 3.5mm pitch Plug 24-16AWG Spring RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE34887-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to MMCX Plug Cable 60 Inch Length Using RG188 Coax., Radio frequency assembly SMA male to MMCX plug cable 60 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to MMCX plug cable 60 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and MMCX cable connection on the other. Our SMA to MMCX cable assemblies have a male gender on end 1 and plug on end 2. This SMA to MMCX cable is a male to plug coax assembly, PE34887-60, can also be known as a SMA plug to MMCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to MMCX male cable assembly PE34887-60 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to MMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34887-60 can also be used in the other direction and will be MMCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MMCX plug cable 60 inch length using RG188 coax. |
| 1,392 | |
| PE3C8873/YW | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-YW, RF Cable Type: Belden 1855A-YW, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable Using 75 Ohm 1855A-YW Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1855A-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1855A-YW coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/YW, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/YW is built with Belden 1855A-YW which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1855A-YW coax. | 220 | |||
| PE3C5887-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum N Male to SMA Male Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM N type to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-100CM, can also be known as a low PIM N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-100CM can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder. |
| 105 | ||
| PE3C8875/WH-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-WH, RF Cable Type: Belden 1855A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/WH-12, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/WH-12 is built with Belden 1855A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-WH coax. |
| 51 | ||
| PE3C8873/OR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-OR, RF Cable Type: Belden 1855A-OR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-OR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-OR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-OR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/OR-120, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/OR-120 is built with Belden 1855A-OR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-OR coax. |
| 44 | ||
| PE3C8873/VL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-VL, RF Cable Type: Belden 1855A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-VL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-VL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/VL-12, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/VL-12 is built with Belden 1855A-VL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-VL coax. |
| 44 | ||
| PE3C8873/YW-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-YW, RF Cable Type: Belden 1855A-YW, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-YW Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-YW coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/YW-72, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/YW-72 is built with Belden 1855A-YW which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-YW coax. |
| 44 | ||
| PE3C8873/BK-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BK, RF Cable Type: Belden 1855A-BK, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-BK Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-BK coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-BK coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/BK-300, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/BK-300 is built with Belden 1855A-BK which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-BK coax. |
| 25 | ||
| PE9887-11 | Pasternack Enterprises | Key Specifications, Waveguide Size: Broadband, Direction Type: Directional, Polarization: Linear, Frequency, Min: 1 GHz, Frequency, Max: 18 GHz. Broadband SMA Waveguide Horn Antenna Operating from 1 GHz to 18 GHz with a Nominal 11 dBi Gain with SMA Female Input Connector. PE9887-11 Broadband waveguide horn antenna is also known as a Broadband horn antenna. Our Broadband horn antenna has a minimum frequency of 1 GHz and a maximum frequency of 18 GHz. This Broadband waveguide horn antenna with is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Broadband horn antenna can ship worldwide the same day as it is purchased as with our other available RF parts. |
| 4 | ||
| PE3887LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to N Male Cable 24 Inch Length Using RG402 Coax, RoHS., Radio frequency assembly SMA male to N male cable 24 inch length using RG402 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 24 inch length using RG402 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3887LF-24, can also be known as a SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3887LF-24 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3887LF-24 can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 24 inch length using RG402 coax, RoHS. |
| 0 | ||
| PE3W18879 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Cable Using LMR-240 Coax. PE3W18879 is a SMA male to BNC male cable using LMR-240 coax. This Pasternack SMA male to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18879 SMA male to BNC male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W18878 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm. TNC Male to N Male Cable Using LMR-400-LLPX Coax. PE3W18878 is a TNC male to N male cable using LMR-400-LLPX coax. This Pasternack TNC male to N male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our male TNC to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18878 TNC male to N male cable assembly is constructed with LMR-400-LLPX coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3887 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50. SMA Male to N Male Cable Using RG402 Coax. PE3887 is a SMA male to N type male cable using RG402 coax. This Pasternack SMA male to type N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm type N for connector 2. Our male SMA to male type N cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3887 SMA male to type N male cable assembly is constructed with RG402 coax. | 0 | |||
| PE3887-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to N Male Cable 6 Inch Length Using RG402 Coax., Radio frequency assembly SMA male to N male cable 6 inch length using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 6 inch length using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to N type cable is a male to male coax assembly, PE3887-6, can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3887-6 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3887-6 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 6 inch length using RG402 coax. |
| 0 | ||
| PE38871 | Pasternack Enterprises | 0 | ||||
 TE Connectivity | 188744-1 | TE Connectivity | CONTACT REC HE14 COSI TIN PLATED Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 28 – 24 AWG Wire Size: .08 – .24 mm² Tin (Sn) Socket 28 – 24 AWG | He13/he14 Contact | Part Number: 188744-1 | Internal Number: 188744-1 | Alias Number: 5000751 | TE Connectivity RoHS : Compliant |
| 47,757 | |
| 170887-1 | TE Connectivity | SLEEVE DIA5 SHUR PLUG NAT Insulation Boot & Sleeve Product Type: Insulation Sleeve Terminal Orientation: Straight Primary Product Material: Vinyl Primary Product Color: Natural Packaging Method: Bag Insulation Sleeve Straight Vinyl Natural | Insulation Boots & Sleeve | Part Number: 170887-1 | Internal Number: 170887-1 | TE Connectivity RoHS : Compliant |
| 37,470 | ||
| 188746-1 | TE Connectivity | CONTACT REC HE13 COSI GOLD PLATED Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 28 – 24 AWG Wire Size: .08 – .24 mm² Gold (Au) Socket Tin 28 – 24 AWG | He13/he14 Contact | Part Number: 188746-1 | Internal Number: 188746-1 | TE Connectivity RoHS : Compliant |
| 27,020 | ||
| 1-178288-7 | TE Connectivity | DYNAMIC D3100S REC HSG 8P X Number of Positions: 8 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Receptacle And Tab Housing: 3.81 Mm Pitch & 250V | 8 Receptacle Housing With | Part Number: 1-178288-7 | Internal Number: 1-178288-7 | TE Connectivity RoHS : Compliant |
| 23,007 | ||
| 31887 | TE Connectivity | PIDG R 22-16 COMM 22-18 MIL 10 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: #10 Closed Ring Tongue Terminal 22 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Ring Tongue Terminal | Part Number: 31887 | Internal Number: 31887 | Alias Number: 1969001P006 | TE Connectivity RoHS : Compliant |
| 13,909 | ||
| 2108877-1 | TE Connectivity | MICRO USB, TYPE B, IP68 USB Type: B Connector Profile: Micro USB Version: 2.0 Connector & Housing Type: Receptacle Number of Positions: 5 B Micro 2.0 Receptacle | Usb Connector | Part Number: 2108877-1 | Internal Number: 2108877-1 | TE Connectivity RoHS : Compliant |
| 5,777 | ||
| 5788794-1 | TE Connectivity | 25 HTMSFL PLUG RA 318 (IN,BL) Number of Positions: 25 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 3 D-Shaped Connector | 25 Plug Board-to-Board Board Mount | Part Number: 5788794-1 | Internal Number: 5788794-1 | 3 | TE Connectivity RoHS : Compliant |
| 1,569 | ||
| 5788796-2 | TE Connectivity | 09 HTMSFL ASSY RA 318 (IN,BL) Number of Positions: 9 Connector & Housing Type: Receptacle Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Receptacle Board-to-Board Board Mount | Part Number: 5788796-2 | Internal Number: 5788796-2 | 1 | TE Connectivity RoHS : Compliant |
| 1,011 | ||
RP73PF1J887RBTDF | TE Connectivity | RP 1J 0.166W 887R 0.1% 25PPM 1K RL Resistance Value: 887 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0603 Surface Mount Resistor | 887 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1J887RBTDF | Internal Number: 2176088-8 | TE Connectivity RoHS : Compliant |
| 976 | ||
| 1888781-1 | TE Connectivity | Cage Assy Behind Bezel QSFP Pluggable Form Factor: QSFP+ Pluggable I/O Product Type: Cage Sealable: Yes Circuit Application: Signal Number of Ports: 1 QSFP+ Cage Signal | High Speed I/o | Part Number: 1888781-1 | Internal Number: 1888781-1 | TE Connectivity RoHS : Compliant |
| 605 | ||
| 2118879-2 | TE Connectivity | PCB Ant., SMA RA, 457mm, 0.7-2.7GHz Antenna Type: PCB Band Type: Multi Band Primary Application: Cellular Cat-M/NB-IoT ISM Communication Protocol: Bluetooth Wi-Fi ISM Cellular Cat-M/NB-IoT LoRaWAN Mounting Location: Internal/Embedded PCB Multi Band Cellular Bluetooth | Antenna | Part Number: 2118879-2 | Internal Number: 2118879-2 | TE Connectivity RoHS : Compliant |
| 581 | ||
| 640388-7 | TE Connectivity | 07P MTA156 HDR ASSY RN STR F/L PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 7 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 7 | PCB Header & Receptacle | Part Number: 640388-7 | Internal Number: 640388-7 | TE Connectivity RoHS : Compliant |
| 435 | ||
| 5788795-1 | TE Connectivity | 25 HTMSFL PLUG RA 318 (SL,BL) Number of Positions: 25 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 25 Plug Board-to-Board Board Mount | Part Number: 5788795-1 | Internal Number: 5788795-1 | TE Connectivity RoHS : Compliant |
| 124 | ||
| 1-968879-1 | TE Connectivity | MT2/JPT70P BUGH KPL Nominal Voltage Architecture: 12 V Number of Positions: 70 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Board Mating Tab Width: 2.8 mm 1.6 mm Timer Connector Housing | 12 V 70 Housing for Female Terminals Wire-to-Board | Part Number: 1-968879-1 | Internal Number: 1-968879-1 | 2.8 mm | TE Connectivity RoHS : Compliant |
| 48 | ||
| 5788799-1 | TE Connectivity | 15 HTMSFL ASSY RA 318 (SL,BL) Number of Positions: 15 Connector & Housing Type: Receptacle Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 2 D-Shaped Connector | 15 Receptacle Board-to-Board Board Mount | Part Number: 5788799-1 | Internal Number: 5788799-1 | 2 | TE Connectivity RoHS : Compliant |
| 29 | ||
 Teledyne HiRel | 5962-8871302XA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | ||
| 5962-8871307SA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-8872402LA | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10 OUTPUT AND-OR RoHS : Not Compliant | 0 | |||
| 5962-8873904XA | Teledyne HiRel | MULTIPLIER, 8 X 8 UNSIGNED MAGNITUDE, 50 NS MULTIPLY TIME | 0 | |||
| 5962-88702012A | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE RoHS : Not Compliant | 0 | |||
| 5962-8871306SA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-8872401LA | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10 OUTPUT AND-OR RoHS : Not Compliant | 0 | |||
| 5962-88726043A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 20 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8873903XA | Teledyne HiRel | MULTIPLIER, 8 X 8 UNSIGNED MAGNITUDE, 70 NS MULTIPLY TIME RoHS : Not Compliant | 0 | |||
| 5962-88735013C | Teledyne HiRel | PROM OTP 2K X 8 REGISTERED 45 NS | 0 | |||
| 5962-8871307XA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
5962-8875601M2A | Teledyne HiRel | DECODER/DEMULTIPLEXER, 8-INPUT, TTL-COMPATIBLE RoHS : Not Compliant | 0 | |||
| 5962-88724033A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10 OUTPUT AND-OR RoHS : Not Compliant | 0 | |||
| 5962-8872606LA | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 35 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-88726103A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
 Vyrian | 5962-8876404XC | Analog Devices Inc | ADC, Flash Method, 8-Bit, 1 Func, 8 Channel, Parallel, 8 Bits Access, BICMOS, CDIP28 RoHS : Not Compliant | 12,005 | ||
| MAX8875EUK33+ | Analog Devices Inc | Fixed Positive LDO Regulator, 3.3V, 0.22V Dropout, PDSO5 RoHS : Compliant | 9,736 | |||
| MAX8878C/W4.2 | Analog Devices Inc | Fixed Positive LDO Regulator, 4.2V | 8,626 | |||
5962-8876501RA | Analog Devices Inc | D/A Converter, 1 Func, Parallel, 4 Bits Input Loading, CDIP20 | 8,616 | |||
| 5962-8872101PA | Analog Devices Inc | Operational Amplifier, 2 Func, 175uV Offset-Max, BIPolar, CDIP8 RoHS : Not Compliant | 7,679 | |||
| MAX8877C/W32 | Analog Devices Inc | Fixed Positive LDO Regulator, 3.15V, 0.12V Dropout RoHS : Not Compliant | 7,392 | |||
| MAX8875EUK31-T | Analog Devices Inc | Fixed Positive LDO Regulator, 3.1V, 0.22V Dropout, PDSO5 RoHS : Not Compliant | 6,644 | |||
| MAX8875EUK15+T | Analog Devices Inc | Fixed Positive LDO Regulator, 1.5V, PDSO5 RoHS : Compliant | 6,070 | |||
| 1TL887-2D | Honeywell Sensing And Control | Toggle Switch, SPST, Latched, 20A, 28VDC, Screw Terminal, Lever Actuator, Panel Mount-threaded | 5,808 | |||
5962-8873001CX | Texas Instruments | OR Gate, AS Series, 4-Func, 2-Input, TTL, CDIP14 | 5,603 | |||
| LTM2887HY-5S-PBF | Analog Devices Inc | 5,461 | ||||
| MAX8877C/W2.5 | Analog Devices Inc | Fixed Positive LDO Regulator, 2.5V RoHS : Unknown | 5,395 | |||
| 5962-88730012A | Texas Instruments | OR Gate, AS Series, 4-Func, 2-Input, TTL, CQCC20 | 4,178 | |||
| MAX4887ETE-T | Maxim Integrated Products | Audio/Video Switch, 1 Func, 1 Channel, BICMOS RoHS : Not Compliant | 1,170 | |||
| MAX8877EZK50-T | Maxim Integrated Products | Fixed Positive LDO Regulator, 5V, 0.12V Dropout, CMOS, PDSO5 RoHS : Not Compliant | 1,109 | |||
 Waytek, Inc. | 7100163887 | 3M | 22-18GA Female Disconnect Red Nylon .250 X .032 Fully Insulated |
| 127,027 | |
| 131887-91 | General Cable Technologies Corporation | 16GA GXL Violet Cross-Link Automotive Wire XLPE -51C to 125C |
| 111,500 | ||
 Win Source Electronics | PIC16F887-I/PT | Microchip Technology Inc | IC MCU 8BIT 14KB FLASH 44TQFP / MCU 8-bit PIC RISC 14KB Flash 2.5V/3.3V/5V Automotive 44-Pin TQFP Tray RoHS : Compliant |
| 36,457 | |
DRV8873HPWPRQ1 | Texas Instruments | IC MTRDRV UNIPLR 0-5.5V 24HTSSOP / Unipolar Motor Driver NMOS Hardware 24-HTSSOP RoHS : Compliant |
| 30,000 | ||
| AX88772CLF | ASIX Electronics Corporation | RoHS : Compliant |
| 15,000 | ||
DRV8873SPWPR | Texas Instruments | IC MOTOR DRIVER DC 5.5V 24HTSSOP / Unipolar Motor Driver NMOS SPI 24-HTSSOP RoHS : Compliant |
| 12,670 | ||
| AX88772LF | ASIX Electronics Corporation | Ethernet CTLR Single Chip 10Mbps/100Mbps 128-Pin LQFP RoHS : Compliant |
| 10,000 | ||
| AX88772ALF | ASIX Electronics Corporation | USB 2.0 to 10/100M Fast Ethernet Controller RoHS : Compliant |
| 8,300 | ||
| PIC16F18877-I/PT | Microchip Technology Inc | RoHS : Compliant |
| 7,500 | ||
| ALC887-VD2-CG | Realtek Semiconductor |
| 6,829 | |||
BQ25887RGER | Texas Instruments | IC BAT BALANCER LI-ION 2C 24VQFN RoHS : Compliant |
| 6,730 | ||
| MC33887APVW | Nexperia | 5.0 A H-Bridge with Load Current Feedback | IC MOTOR DRIVER 5V-28V 20HSOP |
| 4,500 | ||
| AX88796CLI | ASIX Electronics Corporation | Low-Power SPI or Non-PCI Ethernet Controller RoHS : Compliant |
| 4,271 | ||
| KSZ8873RLLI | Microchip Technology Inc | IC ETHERNET SWITCH I2C/SPI / Ethernet Switch 10/100 Base-T/TX PHY I2C, SPI Interface RoHS : Compliant |
| 3,200 | ||
| 5962-8872101PA | Analog Devices Inc | Dual Very Low Noise Precision Operational Amplifier | IC OPAMP GP 2 CIRCUIT 8CERDIP RoHS : Not Compliant |
| 1,800 | ||
AD7887ARM-REEL7 | Analog Devices Inc | IC ADC 12BIT 2CH SRL 8-MSOP RoHS : Not Compliant |
| 1,600 | ||
| BCM88776A1KFSBG P11 | Broadcom Limited |
| 51 | |||
 Wuhan P&S | FDD8874 | onsemi | N-Ch PowerTrench MOSFET 30V,116A,5.1m�� RoHS : Compliant |
| 350,000 | |
| NCV887740D1R2G | onsemi | Automotive Grade Start-Stop Non-Synchronous Boost Controller RoHS : Compliant |
| 2,500 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
German ▼ 
English
Chinese
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand