| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty.
BuyNow |
TME | SLE 17MM 5000LM 930 H ADV8
| Tridonic Gmbh & Co Kg | Power LED; white; COB; 30.3W; 3000K; 3818lm; 900mA; CRImin: 90; SLE | 100 : $9.12
50 : $9.48
25 : $9.86
10 : $10.23
5 : $10.59
1 : $10.95
|
| 30
 |
SLE 13MM 3000LM 930 H ADV8
| Tridonic Gmbh & Co Kg | Power LED; white; COB; 16.8W; 3000K; 2058lm; 500mA; CRImin: 90; SLE | 100 : $6.05
50 : $6.28
25 : $6.54
10 : $6.77
5 : $7.01
1 : $7.26
|
| 20
|
LLE 24X560MM 2400LM 930 HV ADV6
| Tridonic Gmbh & Co Kg | LED strip; W: 24mm; L: 560mm; No.of diodes: 48; CRImin: 90; 2002lm | 108 : $6.95
36 : $7.21
18 : $7.5
10 : $7.78
5 : $8.06
1 : $8.32
|
| 12
|
SLE 21MM 6000LM 930 H ADV8 T
| Tridonic Gmbh & Co Kg | Power LED; white; COB; 40.3W; 3000K; 5176lm; 1200mA; CRImin: 90; SLE | 100 : $13.73
50 : $14.27
25 : $14.84
10 : $15.38
5 : $15.92
1 : $16.46
|
| 6
|
LTD-6930HR
| Lite-On Semiconductor Corporation | Display: LED; 7-segment; 14.22mm; 0.56"; No.char: 2; red; 0.8÷2.4mcd
RoHS : Compliant | | 0
 |
LLE 24X280MM 1250LM 930 HV PRE
| Tridonic Gmbh & Co Kg | LED strip; W: 24mm; L: 280mm; No.of diodes: 24; CRImin: 90; 1128lm | 108 : $5.49
36 : $5.69
18 : $5.92
10 : $6.13
5 : $6.36
1 : $6.57
|
| 0
|
LLE 24X560MM 2400LM 930 HV PRE
| Tridonic Gmbh & Co Kg | LED strip; W: 24mm; L: 560mm; No.of diodes: 48; CRImin: 90; 2256lm | 108 : $8.89
36 : $9.25
18 : $9.61
10 : $9.94
5 : $10.3
1 : $10.66
|
| 0
|
Avnet Americas | 1SMA5930HR3G
| Taiwan Semiconductor | Diode Zener Single 16V 5% 1.5W 2-Pin DO-214AC Plastic T/R - Tape and Reel (Alt: 1SMA5930HR3G)
RoHS : Compliant | | 0
|
1SMB5930HR5G
| Taiwan Semiconductor | Diode Zener Single 16V 5% 550mW 2-Pin DO-214AA Plastic T/R - Tape and Reel (Alt: 1SMB5930HR5G)
RoHS : Compliant | | 0
|
1SMA5930H
| Taiwan Semiconductor | Diode Zener Single 16V 5% 1.5W 2-Pin DO-214AC T/R - Tape and Reel (Alt: 1SMA5930H)
RoHS : Compliant | 120,000 : $0.06355
60,000 : $0.06388
30,000 : $0.06421
15,000 : $0.06455
7,500 : $0.06488
|
| 0
|
1PGSMB5930H
| Taiwan Semiconductor | Diode Zener Single 16V 5% 3W 2-Pin DO-214AA T/R - Tape and Reel (Alt: 1PGSMB5930H)
RoHS : Compliant | 48,000 : $0.13056
24,000 : $0.13124
12,000 : $0.13192
6,000 : $0.1326
3,000 : $0.13328
|
| 0
|
CD-930H-250
| Panduit Corp | - Bulk (Alt: CD-930H-250)
RoHS : Not Compliant | 16 : $184.54234
8 : $187.46143
4 : $190.9484
2 : $195.3236
1 : $199.68494
|
| 0
|
SFSS-09-30-H-05.00-D-NUS
| Samtec Inc | Cable Assembly Discrete Wire 0.127m 9 POS Discrete Wire Housing to 9 POS Discrete Wire Housing RCP-RCP - Bulk (Alt: SFSS-09-30-H-05.00-D-NUS)
RoHS : Compliant | 1,000 : $9.14471
500 : $10.76191
250 : $12.32771
100 : $13.0
1 : $17.92593
|
| 0
|
LTD-6930HR
| Lite-On Semiconductor Corporation | - Rail/Tube (Alt: LTD-6930HR)
RoHS : Compliant | 52,800 : $0.625
26,400 : $0.64103
13,200 : $0.6579
6,600 : $0.67568
3,300 : $0.71429
|
| 0
|
1PGSMB5930HR5G
| Taiwan Semiconductor | Diode Zener Single 16V 5% 3W 2-Pin DO-214AA Plastic T/R - Tape and Reel (Alt: 1PGSMB5930HR5G)
RoHS : Compliant | | 0
|
L-1206MR930HBWS
| Vishay Intertechnologies | L-1206 300PPM .93 3% B WS - Waffle Pack (Alt: L-1206MR930HBWS)
RoHS : Not Compliant | 2,500 : $0.67551
1,000 : $0.81675
500 : $1.22067
250 : $1.9043
100 : $2.6367
|
| 0
|
095-820-109-30H
| Amphenol Corporation | RF / Coaxial Cable Assembly, 11.8 ", 300 mm, 1.37 mm Micro, AMC Right Angle Plug" - Bag (Alt: 095-820-109-30H)
RoHS : Compliant | 2,000 : $16.684
1,000 : $16.77
500 : $17.03947
250 : $19.22973
100 : $22.34286
|
| 0
|
1SMB5930H
| Taiwan Semiconductor | Diode Zener Single 16V 5% 3W 2-Pin DO-214AA T/R - Tape and Reel (Alt: 1SMB5930H)
RoHS : Compliant | 48,000 : $0.11232
24,000 : $0.11291
12,000 : $0.11349
6,000 : $0.11408
3,000 : $0.11466
|
| 0
|
Newark | LTC6930HDCB-8.00#TRMPBF
| Analog Devices Inc | Oscillator, 8Mhz, 5.5V, Dfn-Ep-8; |Analog Devices, Inc. LTC6930HDCB-8.00#TRMPBF
RoHS : Compliant | 1 : $8.52
25 : $6.4
50 : $6.17
100 : $5.94
250 : $5.71
500 : $5.6
|
| 484
|
LTC6930HDCB-8.00#TRMPBF
| Analog Devices Inc | Oscillator, 8Mhz, 5.5V, Dfn-Ep-8; |Analog Devices, Inc. LTC6930HDCB-8.00#TRMPBF
RoHS : Compliant | 1 : $8.52
25 : $6.4
50 : $6.17
100 : $5.94
250 : $5.71
500 : $5.6
|
| 484
|
LTC6930HMS8-8.00#PBF
| Analog Devices Inc | Oscillator, 8Mhz, 5.5V, Msop; |Analog Devices, Inc. LTC6930HMS8-8.00#PBF
RoHS : Compliant | 1 : $5.63
3,000 : $3.19
6,000 : $3.13
12,000 : $3.06
18,000 : $3.0
30,000 : $2.93
|
| 190
|
LTC2930HDD#PBF
| Analog Devices Inc | Voltage Detector, Dfn-Ep-12, 125Deg C; |Analog Devices, Inc. LTC2930HDD#PBF
RoHS : Compliant | 1 : $10.32
10 : $8.05
25 : $7.49
50 : $7.26
100 : $7.02
250 : $6.79
|
| 107
|
LTC6930HMS8-7.37#PBF
| Analog Devices Inc | Oscillator, 7.3728Mhz, 5.5V, Msop; |Analog Devices, Inc. LTC6930HMS8-7.37#PBF
RoHS : Compliant | 1 : $6.62
10 : $5.09
25 : $4.78
50 : $4.47
100 : $4.28
250 : $4.08
|
| 91
|
314C930H01
| Eaton Cutler-Hammer | Handle For Ka; |Eaton Cutler Hammer 314C930H01
RoHS : Not Compliant | 1 : $262.81
10 : $244.03999
25 : $235.38
50 : $226.71001
100 : $216.60001
|
| 0
|
CD-930H-250
| Panduit Corp | Crimp Die For Ct-930, Crimps Htct250-2, Rohs Compliant: Na |Panduit CD-930H-250
RoHS : Not Compliant | 1 : $265.31
10 : $246.36
25 : $237.61
50 : $228.86
100 : $218.66
|
| 0
|
M39003/01-2930H
| Vishay Intertechnologies | 376D154X9100A2Brh; |Vishay M39003/01-2930H
RoHS : Not Compliant | 100 : $125.31
200 : $120.28
300 : $108.4
500 : $104.34
1,000 : $102.82
2,500 : $100.31
|
| 0
|
095-820-109-30H
| Amphenol RF | Cbl Assy, Amphenol Rf 095-820-109-30H; |Amphenol Rf 095-820-109-30H
RoHS : Not Compliant | | 0
|
M39003/01-2930/HSD
| Vishay Intertechnologies | 376D154X9100A2Brzx1; |Vishay M39003/01-2930/HSD
RoHS : Not Compliant | 100 : $126.13
200 : $121.06
300 : $109.11
500 : $105.02
1,000 : $103.5
2,500 : $100.97
|
| 0
|
Analog Devices Inc | LTC6930HMS8-5.00#PBF
| Analog Devices Inc | 32.768kHz to 8.192MHz Precmicr
RoHS : Compliant | | 12,700
|
LTC6930HMS8-7.37#PBF
| Analog Devices Inc | 32.768kHz to 8.192MHz Precmicr
RoHS : Compliant | 1 : $7.23
10 : $5.569
100 : $4.6983
250 : $4.48084
500 : $4.34972
1,000 : $4.24185
|
| 6,335
|
LTC6930HMS8-5.00#TRPBF
| Analog Devices Inc | 32.768kHz to 8.192MHz Precmicr
RoHS : Compliant | 1 : $4.04
1,000 : $2.92
2,500 : $3.74773
|
| 5,000
|
LTC6930HMS8-4.19#PBF
| Analog Devices Inc | 32.768kHz to 8.192MHz Precmicr
RoHS : Compliant | | 2,950
|
LTC6930HDCB-4.19#TRMPBF
| Analog Devices Inc | 32.768kHz to 8.192MHz Precmicr
RoHS : Compliant | 1 : $7.39
10 : $5.694
25 : $5.2712
100 : $4.8062
250 : $4.58464
500 : $4.45104
1,000 : $4.34109
1,500 : $4.28601
|
| 2,587
|
LTC6930HMS8-7.37#TRPBF
| Analog Devices Inc | 32.768kHz to 8.192MHz Precmicr
RoHS : Compliant | 1 : $4.04
1,000 : $2.92
2,500 : $3.74773
|
| 2,500
|
LTC6930HDCB-7.37#TRPBF
| Analog Devices Inc | 32.768kHz to 8.192MHz Precmicr
RoHS : Compliant | 1 : $4.04
1,000 : $2.99
2,500 : $3.82753
|
| 2,500
|
LTC6930HDCB-7.37#TRMPBF
| Analog Devices Inc | 32.768kHz to 8.192MHz Precmicr
RoHS : Compliant | 1 : $4.85
10 : $4.212
100 : $3.661
500 : $4.36624
1,000 : $2.99
|
| 1,500
|
LTC6930HDCB-8.00#TRMPBF
| Analog Devices Inc | 32.768kHz to 8.192MHz Precmicr
RoHS : Compliant | 1 : $7.39
10 : $5.694
25 : $5.2712
100 : $4.8062
250 : $4.58464
500 : $4.45104
1,000 : $4.34109
1,500 : $4.28601
|
| 576
|
LTC6930HMS8-8.00#PBF
| Analog Devices Inc | 32.768kHz to 8.192MHz Precmicr
RoHS : Compliant | 1 : $7.23
10 : $5.569
100 : $4.6983
250 : $4.48084
500 : $4.34972
1,000 : $4.24185
|
| 57
|
LTC2930HDD#PBF
| Analog Devices Inc | Con?gurable Six S Mon w/ Adj
RoHS : Compliant | 1 : $11.27
10 : $8.819
25 : $8.206
1,000 : $4.87
|
| 43
|
LTC6930HDCB-8.19#TRPBF
| Analog Devices Inc | 32.768kHz to 8.192MHz Precmicr
RoHS : Compliant | 1 : $4.04
1,000 : $2.99
2,500 : $3.82753
|
| 0
|
LTC6930HDCB-8.00#TRPBF
| Analog Devices Inc | 32.768kHz to 8.192MHz Precmicr
RoHS : Compliant | 1 : $4.04
1,000 : $2.99
2,500 : $3.82753
|
| 0
|
LTC6930HMS8-8.00#TRPBF
| Analog Devices Inc | 32.768kHz to 8.192MHz Precmicr
RoHS : Compliant | 1 : $5.01
1,000 : $2.92
2,500 : $3.74773
|
| 0
|
LTC6930HDCB-8.19#TRMPBF
| Analog Devices Inc | 32.768kHz to 8.192MHz Precmicr
RoHS : Compliant | 1 : $5.13
10 : $4.422
100 : $3.8202
500 : $4.36624
1,000 : $2.99
|
| 0
|
RS | 2453633 (25530930) (HXLI20370250G-050RS)
| RS Pro | 3/8 X 2 1/2 IN HEX HEAD LAG BOLT, GRADE A, GALVANIZED | | 10
|
TCAN-98R-930-H
| Floyd Bell Inc | RED LIGHTED ALARM, FUNCTIONS ON CAN NETWORK USING THE SAE J1939-15 PROTOCOL | | 2
|
930H150G
| B&B Electronics Manufacturing Company | TIMING BELT, 1.500" BELT WIDTH, 186 TEETH, 93" PITCH LENGTH, SINGLE SIDED | 1 : $127.79
5 : $120.12
10 : $116.29
|
| 0
|
930H300G
| B&B Electronics Manufacturing Company | TIMING BELT, 3.000" BELT WIDTH, 186 TEETH, 93" PITCH LENGTH, SINGLE SIDED | | 0
|
MY3B40-930H
| SMC Corporation of America | RODLESS CYLINDER, MECH JOINT, SLIDE TABLE, MY3 SERIES | | 0
|
MY1B40-930HZ
| SMC Corporation of America | CYLINDER, RODLESS, MECH JOINT, SLIDE TABLE, MY1 SERIES | | 0
|
CANL-97G-930-H
| Floyd Bell Inc | GREEN LED INDICATOR, FUNCTIONS ON CAN NETWORK USING THE SAE J1939-15 PROTOCOL | 1 : $243.44
5 : $228.83
10 : $221.53
|
| 0
|
CANL-97B-930-H
| Floyd Bell Inc | BLUE LED INDICATOR, FUNCTIONS ON CAN NETWORK USING THE SAE J1939-15 PROTOCOL | 1 : $243.44
5 : $228.83
10 : $221.53
|
| 0
|
CANL-97BY-930-H
| Floyd Bell Inc | YELLOW LED INDICATOR, FUNCTIONS ON CAN NETWORK USING THE SAE J1939-15 PROTOCOL | 1 : $243.44
5 : $228.83
10 : $221.53
|
| 0
|
CANL-97RGB-930-H
| Floyd Bell Inc | RED/GREEN/BLUE LED INDICATOR, FUNCTIONS ON CAN NETWORK, SAE J1939-15 PROTOCOL | 1 : $276.85
5 : $260.23
10 : $251.93
|
| 0
|
MY1B32-1930HZ-A93L
| SMC Corporation of America | CYLINDER, RODLESS, MECH JOINT, SLIDE TABLE, MY1 SERIES | | 0
|
MY1B25TNG-1930HSZ
| SMC Corporation of America | CYLINDER, RODLESS, MECH JOINT, SLIDE TABLE, MY1 SERIES | | 0
|
219-2-1-62-5-9-30-H-V
| Sensata Technologies | HYDRAULIC MAGNETIC CIRCUIT BREAKER, 2 POLE, 209 SERIES | | 0
|
209-1-1REG4-62-4-9-30-H
| Sensata Technologies | HYDRAULIC MAGNETIC CIRCUIT BREAKER, DIN RAIL, 30A, 1 POLE, 209 SERIES | 3 : $200.01
15 : $190.01
30 : $184.01
|
| 0
|
1409930 (HC-BBB 40-EBUC)
| Phoenix Contact | RECTANGULAR CONNECTOR;INSERT WITHOUT CONTACTS;500V;40+GROUND POS;CRIMP | | 0
|
Sager | 209-3-1-66-4-9-30-H-V
| Sensata Circuit Breakers | Circuit Breakers | | 0
|
TFSD-19-30-H-23.00-S
| Samtec Inc | Rectangular Cable Assemblies
RoHS : Compliant | | 0
|
219-2-1-62-5-9-30-H-V
| Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag | 1 : $305.32
8 : $216.37
26 : $130.84
70 : $115.86
155 : $99.42
375 : $78.91
|
| 0
|
SFSDT-19-30-H-06.00-DR-NUX
| Samtec Inc | Rectangular Cable Assemblies
RoHS : Compliant | | 0
|
219-2-1REC4-64F-8-9-30-H
| Sensata Circuit Breakers | Circuit Breakers | | 0
|
209-1-1REG4-62-4-9-30-H
| Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag | 1 : $234.24
11 : $158.28
34 : $100.33
101 : $79.8
202 : $76.28
507 : $58.39
|
| 0
|
SFSD-09-30-H-10.00-D-NDS
| Samtec Inc | Rectangular Cable Assemblies
RoHS : Compliant | | 0
|
CD-930H-250
| Panduit Corp | Punches & Dies Crimp Die for CT-930 Crimps HTCT250-2 | 1 : $202.46
3 : $186.88
7 : $179.96
14 : $179.96
34 : $177.77
|
| 0
|
SFSS-09-30-H-05.00-D-NUS
| Samtec Inc | Rectangular Cable Assemblies Single Row Discrete Wire Assembly, 0.050 Pitch
RoHS : Compliant | 1 : $19.1
10 : $18.09
25 : $17.41
50 : $16.98
100 : $14.21
250 : $13.29
|
| 0
|
219-2-1REC4-60-8-9-30-H
| Sensata Circuit Breakers | Circuit Breakers | | 0
|
219-3-1-62-7-9-30-H
| Sensata Circuit Breakers | Circuit Breakers | | 0
|
279-2-1-52-9-9-30-H
| Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag | 1 : $305.32
8 : $216.37
26 : $130.84
70 : $115.86
155 : $99.42
375 : $78.91
|
| 0
|
TFSS-19-30-H-06.00-S
| Samtec Inc | Rectangular Cable Assemblies
RoHS : Compliant | | 0
|
SFSS-19-30-H-06.00-S
| Samtec Inc | Rectangular Cable Assemblies
RoHS : Compliant | | 0
|
TFSDT-19-30-H-06.00-S
| Samtec Inc | Rectangular Cable Assemblies
RoHS : Compliant | | 0
|
Ameya Holding Limited | LTC6930HMS8-8.00#PBF
| Analog Devices Inc | LTC6930HMS8-8.00#PBF 8.192MHz 硅振荡器, 8针 MSOP封装
RoHS : Compliant | | 470
|
Interstate Connecting Components | 095-820-109-30H
| Amphenol RF | AMC RIGHT ANGLE PLUG TO FAKRA | | 0
|
DB Roberts | 11930H
| Heyco | SPPR 201-098 HR TAN | | 0
|
Master Electronics | HTSW-149-30-H-D
| Samtec Inc |
RoHS : Compliant | 250 : $13.96
100 : $15.58
50 : $21.49
25 : $22.13
10 : $22.82
5 : $23.92
1 : $25.57
|
| 0
|
HTSW-109-30-H-D
| Samtec Inc |
RoHS : Compliant | 5,000 : $1.42
2,500 : $2.03
1,000 : $2.63
500 : $2.86
250 : $3.94
100 : $4.06
50 : $4.25
5 : $5.23
|
| 0
|
HTSW-119-30-H-S
| Samtec Inc |
RoHS : Compliant | 5,000 : $1.49
2,500 : $2.13
1,000 : $2.78
500 : $3.03
250 : $4.17
100 : $4.3
50 : $4.5
5 : $5.54
|
| 0
|
HTSW-139-30-H-D
| Samtec Inc |
RoHS : Compliant | 500 : $8.76
250 : $11.41
100 : $12.93
50 : $17.12
25 : $17.63
10 : $18.17
5 : $19.05
|
| 0
|
HTSW-149-30-H-Q
| Samtec Inc |
RoHS : Compliant | 250 : $16.77
100 : $18.74
50 : $25.56
25 : $26.7
10 : $27.52
5 : $28.85
1 : $30.84
|
| 0
|
TFSST-09-30-H-12.00-T-NUS
| Samtec Inc |
RoHS : Compliant | 500 : $9.24
250 : $10.74
100 : $11.67
50 : $16.13
25 : $16.61
10 : $17.12
5 : $17.95
|
| 0
|
TFSD-19-30-H-03.00-S
| Samtec Inc |
RoHS : Compliant | 250 : $15.05
100 : $15.88
50 : $21.77
25 : $22.75
10 : $23.45
5 : $24.58
1 : $26.28
|
| 0
|
HTSW-109-30-H-S-RA
| Samtec Inc |
RoHS : Compliant | 7,500 : $1.08
5,000 : $1.11
2,500 : $1.41
1,000 : $1.58
500 : $2.17
250 : $2.24
100 : $2.34
10 : $2.88
|
| 0
|
TSW-119-30-H-S-RA
| Samtec Inc |
RoHS : Compliant | 5,000 : $1.29
2,500 : $1.96
1,000 : $2.66
500 : $2.93
250 : $4.14
100 : $4.27
50 : $4.47
5 : $5.5
|
| 0
|
TFSD-19-30-H-23.00-S
| Samtec Inc |
RoHS : Compliant | 250 : $24.05
100 : $25.37
50 : $33.36
25 : $35.29
10 : $37.37
5 : $37.46
1 : $41.98
|
| 0
|
219-2-1-62-5-9-30-H-V
| Sensata Circuit Breakers | Circuit Breaker Magnetic 2Pole 30A 480VAC
RoHS : Compliant | 102 : $84.72
51 : $95.63
21 : $155.75
12 : $156.14
6 : $166.0
3 : $225.25
|
| 0
|
SFSDT-19-30-H-06.00-DR-NUX
| Samtec Inc | .050 Tiger Eye™ Double Row Discrete Wire Teflon® Cable Assembly Socket
RoHS : Compliant | 250 : $25.0
100 : $26.71
50 : $36.47
25 : $38.58
10 : $39.73
5 : $40.95
1 : $45.9
|
| 0
|
209-1-1REG4-62-4-9-30-H
| Sensata Circuit Breakers | Hydraulic Magnetic Circuit Breaker DIN Rail 30A 1 Pole 209 Series | Sensata - Airpax 209-1-1REG4-62-4-9-30-H
RoHS : Compliant | 102 : $65.0
51 : $73.36
21 : $119.47
12 : $119.77
6 : $127.3
3 : $172.82
|
| 0
|
HTSW-149-30-H-S
| Samtec Inc |
RoHS : Compliant | 1,000 : $5.51
500 : $6.97
250 : $7.79
100 : $8.25
50 : $11.07
25 : $11.59
5 : $12.79
|
| 0
|
TFSDT-19-30-H-06.00-SL
| Samtec Inc |
RoHS : Compliant | 250 : $16.89
100 : $18.07
50 : $25.67
25 : $26.82
10 : $27.65
5 : $28.98
1 : $30.98
|
| 0
|
Pasternack Enterprises US | PE3C2930/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Male to N Female Bulkhead Cable Using LMR-195 Coax with HeatShrink. PE3C2930/HS is a N male to N female bulkhead cable using LMR-195 coax. This Pasternack N male to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2930/HS N male to N female bulkhead cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3W16930/HS-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 10-32, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 10-32 Male Right Angle to BNC Female Bulkhead Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly 10-32 male right angle to BNC female bulkhead low loss cable 36 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 10-32 male right angle to BNC female bulkhead low loss cable 36 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 10-32 to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle 10-32 cable connection on one end and a BNC bulkhead cable connection on the other. Our low loss right angle 10-32 to BNC cable assembly has a male gender on end 1 and a female on end 2. PE3W16930/HS-36 can also be known as a low loss right angle 10-32 plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16930/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle 10-32 male to bulkhead BNC female cable has a maximum VSWR of 1.4:1. 10-32 plug to BNC jack cable assembly PE3W16930/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with right angle 10-32 to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16930/HS-36 can also be used in the other direction and will be a BNC female bulkhead to right angle 10-32 male cable assembly if the opposite connectivity is required. Low loss 10-32 right angle plug to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 10-32 to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $88.89
25 : $84.45
50 : $80.0
100 : $76.45
|
| 0
|
PE3W16930/HS
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 10-32, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. 10-32 Male Right Angle to BNC Female Bulkhead Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly 10-32 male right angle to BNC female bulkhead low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 10-32 male right angle to BNC female bulkhead low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 10-32 to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle 10-32 cable connection on one end and a BNC bulkhead cable connection on the other. Our low loss right angle 10-32 to BNC cable assembly has a male gender on end 1 and a female on end 2. PE3W16930/HS can also be known as a low loss right angle 10-32 plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16930/HS RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle 10-32 male to bulkhead BNC female cable has a maximum VSWR of 1.4:1. 10-32 plug to BNC jack cable assembly PE3W16930/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with right angle 10-32 to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16930/HS can also be used in the other direction and will be a BNC female bulkhead to right angle 10-32 male cable assembly if the opposite connectivity is required. Low loss 10-32 right angle plug to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 10-32 to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | | 0
|
PE3W16930/HS-200CM
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 10-32, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. 10-32 Male Right Angle to BNC Female Bulkhead Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly 10-32 male right angle to BNC female bulkhead low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 10-32 male right angle to BNC female bulkhead low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 10-32 to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle 10-32 cable connection on one end and a BNC bulkhead cable connection on the other. Our low loss right angle 10-32 to BNC cable assembly has a male gender on end 1 and a female on end 2. PE3W16930/HS-200CM can also be known as a low loss right angle 10-32 plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16930/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle 10-32 male to bulkhead BNC female cable has a maximum VSWR of 1.4:1. 10-32 plug to BNC jack cable assembly PE3W16930/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with right angle 10-32 to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16930/HS-200CM can also be used in the other direction and will be a BNC female bulkhead to right angle 10-32 male cable assembly if the opposite connectivity is required. Low loss 10-32 right angle plug to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 10-32 to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06
|
| 0
|
PE3W11930/HS-9
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. Reverse Polarity TNC Jack Bulkhead to SMA Male Cable 9 Inch Length Using PE-SR402FLJ Coax with HeatShrink., Radio frequency assembly reverse polarity TNC jack bulkhead to SMA male cable 9 inch length using PE-SR402FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity TNC jack bulkhead to SMA male cable 9 inch length using PE-SR402FLJ coax with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC bulkhead cable connection on one end and SMA cable connection on the other. Our reverse polarity TNC to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W11930/HS-9 can also be known as a reverse polarity TNC female to SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC female to SMA plug cable assembly PE3W11930/HS-9 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable reverse polarity TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance. RF specs on this reverse polarity TNC jack bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11930/HS-9 can also be used in the other direction and will be SMA male to reverse polarity TNC jack bulkhead cable assembly if the opposite connectivity is required. TNC reverse polarity female bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC jack bulkhead to SMA male cable 9 inch length using PE-SR402FLJ coax with heatshrink. | 1 : $151.99
25 : $144.39
50 : $136.79
100 : $130.71
|
| 0
|
PE3C4930/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to N Male Cable Using LMR-100 Coax with HeatShrink. PE3C4930/HS is a BMA jack to N male cable using LMR-100A coax. This Pasternack BMA jack to N male cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm N for connector 2. Our jack BMA to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C4930/HS BMA jack to N male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3W05930/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. SMA Female 2 Hole Flange to SMP Female Cable Using PE-047SR Coax with HeatShrink. PE3W05930/HS is a SMA female 2 hole flange to SMP female cable using PE-047SR coax. This Pasternack SMA female 2 hole flange to SMP female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. Our female SMA 2 hole flange to female SMP cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W05930/HS SMA female 2 hole flange to SMP female cable assembly is constructed with PE-047SR coax. | | 0
|
PE3W16930/HS-100CM
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 10-32, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 10-32 Male Right Angle to BNC Female Bulkhead Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly 10-32 male right angle to BNC female bulkhead low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 10-32 male right angle to BNC female bulkhead low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 10-32 to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle 10-32 cable connection on one end and a BNC bulkhead cable connection on the other. Our low loss right angle 10-32 to BNC cable assembly has a male gender on end 1 and a female on end 2. PE3W16930/HS-100CM can also be known as a low loss right angle 10-32 plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16930/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle 10-32 male to bulkhead BNC female cable has a maximum VSWR of 1.4:1. 10-32 plug to BNC jack cable assembly PE3W16930/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with right angle 10-32 to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16930/HS-100CM can also be used in the other direction and will be a BNC female bulkhead to right angle 10-32 male cable assembly if the opposite connectivity is required. Low loss 10-32 right angle plug to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 10-32 to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $88.89
25 : $84.45
50 : $80.0
100 : $76.45
|
| 0
|
PE3W21930/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: LMR-400-75, RF Cable Type: LMR-400-75, RF Cable Impedance: 75 Ohm. 75 Ohm N Male to 75 Ohm F Male Cable Using 75 Ohm LMR-400-75 Coax with HeatShrink. PE3W21930/HS is a N male to F male cable using LMR-400-75 coax. This Pasternack N male to F male cable assembly uses a 75 Ohm N for connector 1 and a 75 Ohm F for connector 2. Our male N to male F cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W21930/HS N male to F male cable assembly is constructed with LMR-400-75 coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE35930/HS
| Pasternack Enterprises | | | 0
|
PE3W13930/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to N Male Cable Using LMR-400-DB Coax with HeatShrink. PE3W13930/HS is a TNC male right angle to N male cable using LMR-400-DB coax. This Pasternack TNC male right angle to N male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. TNC right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13930/HS TNC male right angle to N male cable assembly is constructed with LMR-400-DB coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3W11930/HS
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Jack Bulkhead to SMA Male Cable Using PE-SR402FLJ Coax with HeatShrink., Radio frequency assembly reverse polarity TNC jack bulkhead to SMA male cable using PE-SR402FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity TNC jack bulkhead to SMA male cable using PE-SR402FLJ coax with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC bulkhead cable connection on one end and SMA cable connection on the other. Our reverse polarity TNC to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W11930/HS can also be known as a reverse polarity TNC female to SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC female to SMA plug cable assembly PE3W11930/HS is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable reverse polarity TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance. RF specs on this reverse polarity TNC jack bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11930/HS can also be used in the other direction and will be SMA male to reverse polarity TNC jack bulkhead cable assembly if the opposite connectivity is required. TNC reverse polarity female bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC jack bulkhead to SMA male cable using PE-SR402FLJ coax with heatshrink. | | 0
|
PE3C0930/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. 10-32 Male Right Angle to BNC Male Cable Using RG316-DS Coax with HeatShrink. PE3C0930/HS is a 10-32 male right angle to BNC male cable using RG316-DS coax. This Pasternack 10-32 male right angle to BNC male cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm BNC for connector 2. 10-32 right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 10-32 right angle to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0930/HS 10-32 male right angle to BNC male cable assembly is constructed with RG316-DS coax. | | 0
|
PE3W11930/HS-6
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Reverse Polarity TNC Jack Bulkhead to SMA Male Cable 6 Inch Length Using PE-SR402FLJ Coax with HeatShrink., Radio frequency assembly reverse polarity TNC jack bulkhead to SMA male cable 6 inch length using PE-SR402FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity TNC jack bulkhead to SMA male cable 6 inch length using PE-SR402FLJ coax with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC bulkhead cable connection on one end and SMA cable connection on the other. Our reverse polarity TNC to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W11930/HS-6 can also be known as a reverse polarity TNC female to SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC female to SMA plug cable assembly PE3W11930/HS-6 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable reverse polarity TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance. RF specs on this reverse polarity TNC jack bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11930/HS-6 can also be used in the other direction and will be SMA male to reverse polarity TNC jack bulkhead cable assembly if the opposite connectivity is required. TNC reverse polarity female bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC jack bulkhead to SMA male cable 6 inch length using PE-SR402FLJ coax with heatshrink. | 1 : $147.99
25 : $140.59
50 : $133.19
100 : $127.27
|
| 0
|
PE3W16930/HS-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 10-32, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 10-32 Male Right Angle to BNC Female Bulkhead Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly 10-32 male right angle to BNC female bulkhead low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 10-32 male right angle to BNC female bulkhead low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 10-32 to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle 10-32 cable connection on one end and a BNC bulkhead cable connection on the other. Our low loss right angle 10-32 to BNC cable assembly has a male gender on end 1 and a female on end 2. PE3W16930/HS-48 can also be known as a low loss right angle 10-32 plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16930/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle 10-32 male to bulkhead BNC female cable has a maximum VSWR of 1.4:1. 10-32 plug to BNC jack cable assembly PE3W16930/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with right angle 10-32 to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16930/HS-48 can also be used in the other direction and will be a BNC female bulkhead to right angle 10-32 male cable assembly if the opposite connectivity is required. Low loss 10-32 right angle plug to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 10-32 to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $89.89
25 : $85.4
50 : $80.9
100 : $77.31
|
| 0
|
Vyrian | LTC6930HDCB-8-00-TRPBF
| Analog Devices Inc | | | 11,873
|
LTC6930HDCB-4.19#PBF
| Analog Devices Inc | CMOS Output Clock Oscillator, 4.194304MHz Nom
RoHS : Compliant | | 11,705
|
LTC6930HDCB-8-19-TRPBF
| Analog Devices Inc | | | 9,541
|
LTC6930HMS8-8-19-PBF
| Analog Devices Inc | | | 9,049
|
LTC6930HMS8-7-37-TRPBF
| Analog Devices Inc | | | 8,198
|
LTC6930HDCB-7-37-TRMPBF
| Analog Devices Inc | | | 8,167
|
LTC6930HMS8-4.19#PBF
| Analog Devices Inc | CMOS Output Clock Oscillator, 4.194304MHz Nom
RoHS : Compliant | | 7,990
|
LTC6930HDCB-8-00
| Analog Devices Inc | | | 7,721
|
LTC6930HDCB-8.00#TRMPBF
| Analog Devices Inc | CMOS Output Clock Oscillator, 8MHz Nom
RoHS : Compliant | | 7,474
|
LTC6930HDCB-4-19-TRPBF
| Analog Devices Inc | | | 7,069
|
LTC6930HMS8-5.00#PBF
| Analog Devices Inc | CMOS Output Clock Oscillator, 5MHz Nom
RoHS : Compliant | | 6,312
|
LTC6930HDCB-8.19#TRPBF
| Analog Devices Inc | CMOS Output Clock Oscillator, 8.192MHz Nom
RoHS : Compliant | | 6,245
|
LTC2930HDD#TRPBF
| Analog Devices Inc | Power Supply Support Circuit, Adjustable, 6 Channel, PDSO12
RoHS : Compliant | | 5,646
|
LTC6930HMS8-5-00-TRPBF
| Analog Devices Inc | | | 5,474
|
LTC6930HDCB-4.19#TRMPBF
| Analog Devices Inc | CMOS Output Clock Oscillator, 4.194304MHz Nom
RoHS : Compliant | | 5,066
|
Win Source Electronics | TB2930HQ
| Toshiba America Electronic Components | | 178 : $2.1864
143 : $2.2774
110 : $2.3686
77 : $2.5507
49 : $2.6417
23 : $2.824
|
| 10,200
|
German ▼ 
English
Chinese
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand