C101L-DS03-R Price, Verteiler, Stock

The MIN02-002EC101J-F is a surface-mount multilayer mica RF capacitor with a capacitance of 100 pF a voltage rating of 300 Vdc and a ±5% tolerance.
RoHS : Compliant

2,600 : $4.95
1,000 : $4.97
600 : $5.33
400 : $5.34
200 : $5.36
50 : $5.67
25 : $6.88
5 : $8.27

448

C101

Fluke Calibration

Hard Case
RoHS : Not Compliant

102 : $96.34
51 : $97.8
21 : $99.66
12 : $100.84
6 : $102.29
3 : $103.75

RC10-12X

Thomas & Betts

Sta-Con® Nylon-Insulated Ring Terminal - Wire Range #12-#10AWG - Material Copper - Tin-Plated Finish - Color Yellow - Bolt Hole 1/2 Inch - Expanded Entry
RoHS : Compliant

1,000 : $5.12
500 : $5.17
250 : $5.19
100 : $5.41
50 : $5.52
25 : $5.53
5 : $6.19
1 : $6.809

C101

TE Connectivity

Fluke C101 Hard Case
RoHS : Not Compliant

5 : $3,669.84
3 : $5,825.15
1 : $11,896.03

3310C-101-204L

Bourns Inc

Res Conductive Plastic POT 200K Ohm 20% 0.25W(1/4W) 1(Elec)/1(Mech)Turn 3.18mm (17.88 X 9.53 X 9.53mm) Pin Panel Mount/Through Hole
RoHS : Compliant

7,500 : $1.91
5,000 : $1.92
2,500 : $1.97
1,000 : $2.03
500 : $2.16
250 : $2.17
100 : $2.34
50 : $2.5

27P-REC-1-01

TE Connectivity

RECEPTACLE MU CONTROL
RoHS : Compliant

5 : $497.77
3 : $505.35
1 : $539.96

RC10-10FS

Thomas & Betts

Sta-Con® Nylon-Insulated Fork Terminal - Flanged Tongue - Wire Range #12-#10AWG - Material Copper - Tin-Plated Finish - Color Yellow - Bolt Hole #10
RoHS : Compliant

7,500 : $2.67
5,000 : $2.68
2,500 : $2.71
1,000 : $2.85
500 : $2.86
250 : $3.03
100 : $3.25
50 : $3.26

C1010KJL

TE Connectivity

C10 10K 5% (LOOSE)
Vitreous Coated Wirewound Power Resistors
Fixed Resistor MOQ Reduction
RoHS : Compliant

400 : $2.45
300 : $2.5
200 : $2.68
100 : $3.57

REC10-1205S/H2/M

RECOM Power GmbH

Regulated DC-DC Converter - 10W - Input: 9 to 18VDC - Output: 5VDC - 2kV Isolation - Thru Hole
RoHS : Compliant

250 : $38.89
100 : $40.74
50 : $42.14
30 : $43.17
10 : $45.37
5 : $46.77
1 : $50.0

PIC24FJ32MC101-E/SS

Microchip Technology Inc

Microcontroller - Automotive AEC-Q100 PIC 24F - 16-Bit - 16 MIPs - 15 I/O - 32KB (11K x 24) FLASH - 1K x 16 RAM - 3 to 3.6V - 20-SSOP.
RoHS : Compliant

268 : $3.0
201 : $3.07
134 : $3.29
67 : $4.38

1811C10-130508

TE Connectivity

1811C10-130508 MOQ Reduction
RoHS : Not Compliant

7 : $353.6
6 : $360.82
4 : $455.77
2 : $740.63

Y54C10151GN0XFP

C&K Switches

Key Switch
RoHS : Compliant

2,700 : $2.25
2,025 : $2.3
1,350 : $3.27
675 : $6.17

3310C-101-203L

Bourns Inc

Res Conductive Plastic POT 20K Ohm 20% 0.25W(1/4W) 1(Elec)/1(Mech)Turn 3.18mm (17.88 X 9.53 X 9.53mm) Pin Panel Mount/Through Hole
RoHS : Compliant

7,500 : $1.91
5,000 : $1.92
2,500 : $1.97
1,000 : $2.03
500 : $2.16
250 : $2.17
100 : $2.34
50 : $2.5

Pasternack Enterprises US

PE3C10165

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. BNC Female to Trimmed Lead Cable Using RG142 Coax., Radio frequency assembly BNC female to trimmed lead cable using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to trimmed lead cable using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a trimmed lead cable connection on the other. Our BNC to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C10165 can also be known as a BNC jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.97-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10165 RF cable has a FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 70 dB. BNC jack to trimmed lead sexless cable assembly PE3C10165 is built with RG142 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to trimmed lead cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10165 can also be used in the other direction and will be a trimmed lead sexless to BNC female cable assembly if the opposite connectivity is required. BNC jack to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to trimmed lead cable assembly for quick shipment worldwide. Variations of BNC and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to Trimmed Lead RF cable assembly as per your requirements.

2,705

PE3C10105-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. NEX10 Male to NEX10 Male Low PIM Cable 9 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 9 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 9 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3C10105-9 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10105-9 RF cable has a FEP jacket of 0.161-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 150 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. NEX10 plug to NEX10 plug cable assembly PE3C10105-9 is built with PE-SR402FLJ which is a formable coax type. The Pasternack low passive intermodulation formable NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

PE3C10163/HS-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SSMA Male to SSMC Plug Low Loss Cable 100 CM Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly SSMA male to SSMC plug low loss cable 100 cm length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMA male to SSMC plug low loss cable 100 cm length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SSMA cable connection on one end and a SSMC cable connection on the other. Our low loss SSMA to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10163/HS-100CM can also be known as a low loss SSMA plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10163/HS-100CM RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SSMA male to SSMC plug cable has a maximum VSWR of 1.4:1. SSMA plug to SSMC male cable assembly PE3C10163/HS-100CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to SSMC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10163/HS-100CM can also be used in the other direction and will be a SSMC plug to SSMA male cable assembly if the opposite connectivity is required. Low loss SSMA plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMC cable assembly for quick shipment worldwide. Variations of SSMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to SSMC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $97.39
25 : $92.52
50 : $87.65
100 : $83.76

PE3C10134

Pasternack Enterprises

PE3C10145/HS

Pasternack Enterprises

PE3C10130

Pasternack Enterprises

PE3C1015-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using Tinned RG402 Coax., Radio frequency assembly SMA male to SMA male cable 36 inch length using tinned RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 36 inch length using tinned RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C1015-36, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C1015-36 is built with RG402 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 36 inch length using tinned RG402 coax.

1 : $60.99
25 : $57.94
50 : $54.89
100 : $52.45

PE3C10167

Pasternack Enterprises

PE3C10101-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to N Male Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N male cable 12 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N male cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10101-12 can also be known as a 2.92mm plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N plug cable assembly PE3C10101-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10101-12 can also be used in the other direction and will be type N male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.

1 : $139.99
25 : $132.99
50 : $125.99
100 : $120.39

PE3C10110

Pasternack Enterprises

PE3C10192

Pasternack Enterprises

PE3C1010

Pasternack Enterprises

PE3C10101-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Male to N Male Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N male cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N male cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10101-24 can also be known as a 2.92mm plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N plug cable assembly PE3C10101-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10101-24 can also be used in the other direction and will be type N male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.

1 : $151.99
25 : $144.39
50 : $136.79
100 : $130.71

PE3C10122

Pasternack Enterprises

PE3C10159

Pasternack Enterprises

Venkel Ltd.

TFCR0402-16W-C-1012DT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;10.1K;�0.5%
RoHS : Compliant

TFCR0603-10W-C-1010DT

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;101R;�0.5%
RoHS : Compliant

TFCR0603-10W-C-1013FT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;101K ;�1%
RoHS : Compliant

TFCR0805-10W-C-1014FT

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;1.01M;�1%
RoHS : Compliant

TFCR0805-8W-C-1013BT

VENKEL LTD

Thin Film CR;0805;1/8W;�50PPM;101K ;�0.1%
RoHS : Compliant

TFCR1206-8W-C-1010CT

VENKEL LTD

Thin Film CR;1206;1/8W;�50PPM;101R;�0.25%
RoHS : Compliant

TFCR1210-4W-C-1011DT-1K

VENKEL LTD

Thin Film CR;1210;1/4W;�50PPM;1.01K;�0.5%
RoHS : Compliant

TFCR0603-10W-C-1011FT

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;1.01K;�1%
RoHS : Compliant

TFCR1206-4W-C-1010DT

VENKEL LTD

Thin Film CR;1206;1/4W;�50PPM;101R;�0.5%
RoHS : Compliant

TFCR2010-4W-C-1011CT

VENKEL LTD

Thin Film CR;2010;1/4W;�50PPM;1.01K;�0.25%
RoHS : Compliant

TFCR2512-2W-C-1012BT-1K

VENKEL LTD

Thin Film CR;2512;1/2W;�50PPM;10.1K;�0.1%
RoHS : Compliant

TFCR2512-2W-C-1013BT

VENKEL LTD

Thin Film CR;2512;1/2W;�50PPM;101K ;�0.1%
RoHS : Compliant

TFCR0603-16W-C-1013FT

VENKEL LTD

Thin Film CR;0603;1/16W;�50PPM;101K ;�1%
RoHS : Compliant

TFCR0805-8W-C-1013CT

VENKEL LTD

Thin Film CR;0805;1/8W;�50PPM;101K ;�0.25%
RoHS : Compliant

TFCR1206-4W-C-1013FT-1K

VENKEL LTD

Thin Film CR;1206;1/4W;�50PPM;101K ;�1%
RoHS : Compliant

Vyrian

UVR2C101MHD

Nichicon Corporation

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 160V, 20% +Tol, 20% -Tol, 100uF, Through Hole Mount
RoHS : Compliant

17,031

TVX1C101MAD

Nichicon Corporation

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 100uF, Through Hole Mount
RoHS : Compliant

17,007

C1010KJL

TE Connectivity

Fixed Resistor, Wire Wound, 10W, 10000ohm, 500V, 5% +/-Tol, 90ppm/Cel, Through Hole Mount
RoHS : Compliant

13,042

G3MC-101PL-VD-DC5

OMRON Corporation

Trigger Output SSR, 1-Channel, 2500V Isolation

11,309

G3MC-101PL-DC5

OMRON Corporation

Trigger Output SSR, 1-Channel, 2500V Isolation

9,433

L-ASC10-1SG48ITR

Lattice Semiconductor Corporation

Power Supply Support Circuit, Adjustable, 14 Channel
RoHS : Compliant

9,158

M27C1011-12F1

STMicroelectronics

RoHS : Compliant

8,959

TPC1010APB-068M

Texas Instruments

Field Programmable Gate Array, 295-Cell, CMOS, CPGA68
RoHS : Not Compliant

8,934

TPC1010BFN-044I1

Texas Instruments

Field Programmable Gate Array, 295 CLBs, 1200 Gates, 295-Cell, CMOS, PQCC44
RoHS : Not Compliant

6,684

G3MC-101P-DC24

OMRON Corporation

Trigger Output SSR, 1-Channel, 2500V Isolation

5,994

M27C1011-15XF1

STMicroelectronics

RoHS : Compliant

5,976

DAC101C081CISD/NOPB

Texas Instruments

D/A Converter, 1 Func, Serial Input Loading, 6us Settling Time, PDSO6
RoHS : Compliant

5,137

KFJ-FPC101/1G

Kingston Technology Company

2,529

MC10113L

onsemi

XOR Gate, 10K Series, 4-Func, 2-Input, ECL, CDIP16
RoHS : Not Compliant

2,386

RC10-10FS

Abb Installation Products

Fork Terminal

359

Win Source Electronics

KRC101S-RTK/P

KEC

28,305 : $0.0106
21,190 : $0.0118
16,265 : $0.0123
11,815 : $0.0127
7,635 : $0.0131
3,145 : $0.0159

900,000

TC1014-3.0VCT713

Microchip Technology Inc

IC REG LDO 3V 50MA SOT23-5
RoHS : Compliant

77 : $4.3788
58 : $4.8841
45 : $5.0524
33 : $5.2209
21 : $5.3893
9 : $6.5681

76,049

CL10C101JBNC

Samsung Electronics Co. Ltd

Multilayer Ceramic Capacitor

15,310 : $0.022
11,420 : $0.0245
8,815 : $0.0254
6,415 : $0.0262
4,135 : $0.0271
1,705 : $0.0329

75,015

NFM18CC101R1C3D

Murata Manufacturing Co Ltd

CAP FEEDTHRU 100PF 20% 16V 0603
RoHS : Compliant

5,130 : $0.0585
3,835 : $0.0652
2,965 : $0.0675
2,155 : $0.0697
1,390 : $0.072
575 : $0.0877

72,000

DAC101C081CIMKX/NOPB

Texas Instruments

DAC 10BIT MICROPWR I2C TSOT23-6 / DAC 1-CH Resistor-String 10-bit 6-Pin TSOT-23 T/R
RoHS : Compliant

149 : $2.0164
112 : $2.249
86 : $2.3266
63 : $2.4041
41 : $2.4817
17 : $3.0245

15,460

DAC101S101CIMKX/NOPB

Texas Instruments

DAC 10BIT MICROPWR R-R TSOT23-6
RoHS : Compliant

260 : $1.1693
195 : $1.3042
150 : $1.3492
110 : $1.3941
70 : $1.4391
30 : $1.7539

11,570

EEE-FK1C101P

Panasonic Electronic Components

CAP ALUM 100UF 20% 16V SMD

2,015 : $0.1491
1,615 : $0.1552
1,240 : $0.1613
870 : $0.1734
560 : $0.1794
265 : $0.1916

10,050

ADC101S051CIMF

National Semiconductor Corporation

IC ADC 10BIT SAR SOT23-6 / 10 Bit Analog to Digital Converter 1 Input 1 SAR SOT-23-6
RoHS : Not Compliant

201 : $1.4959
150 : $1.6685
116 : $1.726
85 : $1.7836
55 : $1.8411
23 : $2.2438

8,000

ADC101S051CIMFX

Texas Instruments

ADC 10BIT 1CH 500KSPS SOT23-6
RoHS : Not Compliant

218 : $1.5421
175 : $1.6048
135 : $1.6676
94 : $1.7929
61 : $1.8556
29 : $1.9809

7,410

DAC101C085CIMM/NOPB

Texas Instruments

IC DAC 10BIT MICROPWR I2C 8VSSOP
RoHS : Compliant

295 : $1.0227
220 : $1.1407
170 : $1.18
125 : $1.2194
80 : $1.2587
35 : $1.5341

7,000

DAC101C085CIMMX/NOPB

Texas Instruments

DAC 10BIT MICROPWR I2C 8VSSOP
RoHS : Compliant

240 : $1.2575
180 : $1.4026
140 : $1.451
105 : $1.4993
65 : $1.5477
30 : $1.8862

7,000

CPC1014NTR

IXYS Integrated Circuits Division

4-Pin SOP OptoMOS® Relay
RoHS : Unknown

124 : $2.4228
100 : $2.5213
77 : $2.6197
54 : $2.8167
35 : $2.9152
17 : $3.1122

6,720

CPC1018N

IXYS Integrated Circuits Division

SSR RELAY SPST-NO 600MA 0-60V / Solid State SPST-NO (1 Form A) 4-SOP (0.150", 3.81mm)
RoHS : Compliant

107 : $2.8168
86 : $2.9313
66 : $3.0459
46 : $3.2749
30 : $3.3894
14 : $3.6184

6,256

CY7C1019D-10VXI

Cypress Semiconductor

1-Mbit (128K x 8) Static RAM
RoHS : Compliant

31 : $9.8485
23 : $10.9849
18 : $11.3637
13 : $11.7425
9 : $12.1213
4 : $14.7728

1,500

CY7C1011CV33-10ZSXA

Cypress Semiconductor

2-Mbit (128K x 16) Static RAM
RoHS : Compliant

30 : $11.2
23 : $12.4924
18 : $12.9231
13 : $13.3539
9 : $13.7846
4 : $16.8

550

C101L-DS03-R Verteiler

Link URL