C20-R033M-R Price, Verteiler, Stock

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ Low PIM, RF Cable Type: PE-SR402FLJ Low PIM, RF Cable Impedance: 50 Ohm. N Male to 7/16 DIN Female LSZH Jacketed Low PIM Cable Using SR402FLJ Low PIM Coax with HeatShrink, RoHS., Radio frequency assembly N male to 7/16 DIN female LSZH jacketed low PIM cable using SR402FLJ low PIM coax with heatshrink, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN female LSZH jacketed low PIM cable using SR402FLJ low PIM coax with heatshrink, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM type N to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This N type to 7/16 DIN cable is a male to female coax assembly, PE3C2005, can also be known as a low PIM type N plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN jack cable assembly PE3C2005 is built with PE-SR402FLJ low PIM which is a formable coax type. The Pasternack low passive intermodulation formable N cable assembly is manufactured with N type to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM type N male to 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2005 can also be used in the other direction and will be 7/16 DIN female to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN female LSZH jacketed low PIM cable using SR402FLJ low PIM coax with heatshrink, RoHS.

PE3C2006-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ Low PIM, RF Cable Type: PE-SR402FLJ Low PIM, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. N Male to SMA Male LSZH Jacketed Low PIM Cable 200 cm Length Using SR402FLJ Low PIM Coax with HeatShrink, RoHS., Radio frequency assembly N male to SMA male LSZH jacketed low PIM cable 200 cm length using SR402FLJ low PIM coax with heatshrink, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to SMA male LSZH jacketed low PIM cable 200 cm length using SR402FLJ low PIM coax with heatshrink, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This N type to SMA cable is a male to male coax assembly, PE3C2006-200CM, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C2006-200CM is built with PE-SR402FLJ low PIM which is a formable coax type. The Pasternack low passive intermodulation formable N cable assembly is manufactured with N type to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2006-200CM can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM N type plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SMA male LSZH jacketed low PIM cable 200 cm length using SR402FLJ low PIM coax with heatshrink, RoHS.

1 : $165.99
25 : $157.69
50 : $149.39
100 : $142.75

PE3C2008-40

Pasternack Enterprises

1 : $45.39
25 : $43.12
50 : $40.85
100 : $39.04

PE3C2037/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Female Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to SMA female low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss a SMA to a SMA cable assembly has male gender on end 1 and female on end 2. PE3C2037/HS-48 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2037/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to SMA jack cable assembly PE3C2037/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2037/HS-48 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $81.99
25 : $77.89
50 : $73.79
100 : $70.51

PE3C2043

Pasternack Enterprises

PE3C2090LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to N Female Bulkhead Cable Using RG58 Coax, LF Solder. PE3C2090LF is a SMA male right angle to N female bulkhead cable using RG58 coax. This Pasternack SMA male right angle to N female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2090LF SMA male right angle to N female bulkhead cable assembly is constructed with RG58 coax.

PE3C2037/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to SMA female low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss a SMA to a SMA cable assembly has male gender on end 1 and female on end 2. PE3C2037/HS can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2037/HS RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to SMA jack cable assembly PE3C2037/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2037/HS can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

PE3C2042

Pasternack Enterprises

PE3C2060LF/HS

Pasternack Enterprises

PE3C2062LF

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using LMR-400-DB Coax, LF Solder. PE3C2062LF is a TNC male to TNC male cable using LMR-400-DB coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2062LF TNC male to TNC male cable assembly is constructed with LMR-400-DB coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C2079

Pasternack Enterprises

PE3C2082/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to SMA male right angle low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2082/HS can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C2082/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2082/HS can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle low loss cable using LMR-100 coax with heatshrink.

PE3C2027/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Blue FAKRA Jack to FAKRA Jack Cable Using LMR-100 Coax with HeatShrink. PE3C2027/HS is a FAKRA jack to FAKRA jack cable using LMR-100A coax. This Pasternack FAKRA jack to FAKRA jack cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. Our jack FAKRA to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2027/HS FAKRA jack to FAKRA jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C2050

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: PE-B305, RF Cable Type: PE-B305, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 75 Ohm BNC Female Bulkhead Cable Using 75 Ohm PE-B305 Coax. PE3C2050 is a BNC male to BNC female bulkhead cable using PE-B305 coax. This Pasternack BNC male to BNC female bulkhead cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. Our male BNC to female BNC bulkhead cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3C2050 BNC male to BNC female bulkhead cable assembly is constructed with PE-B305 coax.

PE3C2072/HS

Pasternack Enterprises

TE Connectivity

DRC20-50P04

TE Connectivity

HDR, 50P, BLK, ST, AU/NI/CU, 04 PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 50 Number of Rows: 5 Centerline (Pitch): 4.42 mm Vertical Wire-to-Board 50 | Deutsch Drc Header | Part Number: DRC20-50P04 | Internal Number: DRC20-50P04 | Alias Number: ZPF000000000131354 | 4.42 mm | TE Connectivity
RoHS : Compliant

1 : $54.16

345

HSC20056RJ

TE Connectivity

HSC200 56R 5% Resistance Value: 56 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminum Housed & Hsa | 56 Ω Wire Wound 5 % Power Resistor | Part Number: HSC20056RJ | Internal Number: 2-1630019-4 | TE Connectivity
RoHS : Compliant

10 : $91.63
1 : $101.81

185

HSC20015KJ

TE Connectivity

HSC200 15K 5% Resistance Value: 15K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminum Housed & Hsa | 15K Ω Wire Wound 5 % Power Resistor | Part Number: HSC20015KJ | Internal Number: 3-1630019-0 | TE Connectivity
RoHS : Compliant

10 : $88.14
1 : $97.93

128

HSC20082RJ

TE Connectivity

HSC200 82R 5% Resistance Value: 82 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminum Housed & Hsa | 82 Ω Wire Wound 5 % Power Resistor | Part Number: HSC20082RJ | Internal Number: 3-1630019-7 | TE Connectivity
RoHS : Compliant

10 : $91.63
1 : $101.81

107

HSC2001K0J

TE Connectivity

HSC200 1K0 5% Resistance Value: 1K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminum Housed & Hsa | 1K Ω Wire Wound 5 % Power Resistor | Part Number: HSC2001K0J | Internal Number: 1630019-8 | TE Connectivity
RoHS : Compliant

10 : $88.14
1 : $97.93

HSC200470RJ

TE Connectivity

HSC200 470R 5% Resistance Value: 470 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminum Housed & Hsa | 470 Ω Wire Wound 5 % Power Resistor | Part Number: HSC200470RJ | Internal Number: 2-1630019-1 | TE Connectivity
RoHS : Compliant

10 : $88.14
1 : $97.93

3SBC2002A2

TE Connectivity

3SBC2002A2 = M39016/13-057P Relay & Contactor Type: General Purpose Signal Relay Current Type: DC Coil Magnetic System: Non-Polarized, Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 2 A General Purpose Signal Relay DC Non-Polarized, Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: 3SBC2002A2 | Internal Number: 1-1617073-4 | TE Connectivity
RoHS : Compliant

1 : $333.72

HSC20020RJ

TE Connectivity

HSC200 20R 5% Resistance Value: 20 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminum Housed & Hsa | 20 Ω Wire Wound 5 % Power Resistor | Part Number: HSC20020RJ | Internal Number: 4-1630019-7 | TE Connectivity
RoHS : Compliant

10 : $88.14
1 : $97.93

HSC20020KJ

TE Connectivity

HSC200 20K 5% Resistance Value: 20K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminum Housed & Hsa | 20K Ω Wire Wound 5 % Power Resistor | Part Number: HSC20020KJ | Internal Number: 1-1630019-1 | TE Connectivity
RoHS : Compliant

10 : $91.63
1 : $101.81

HSC200127RJ

TE Connectivity

HSC200 127R 5% Resistance Value: 127 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminum Housed & Hsa | 127 Ω Wire Wound 5 % Power Resistor | Part Number: HSC200127RJ | Internal Number: 2-1630019-9 | TE Connectivity
RoHS : Compliant

10 : $91.63
1 : $101.81

IL19-C20-SJT-3160-183

TE Connectivity

IL19-C20-SJT-3160-183 Operating Voltage (Max): 250 VAC Current Rating (Max): 15 A Product Length: 1830 mm Product Length: 72.05 in IP Rating: IP20 Il 13 & Il 13 P & Il 19 | 250 VAC 15 A 1830 mm 72.05" | Part Number: IL19-C20-SJT-3160-183 | Internal Number: 814181-SF | TE Connectivity
RoHS : Compliant

25 : $141.28
10 : $152.15
1 : $163.02

HSC200390RJ

TE Connectivity

HSC200 390R 5% Resistance Value: 390 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminum Housed & Hsa | 390 Ω Wire Wound 5 % Power Resistor | Part Number: HSC200390RJ | Internal Number: 4-1630019-1 | TE Connectivity
RoHS : Compliant

10 : $91.63
1 : $101.81

HSC200100RJ

TE Connectivity

HSC200 100R 5% Resistance Value: 100 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminum Housed & Hsa | 100 Ω Wire Wound 5 % Power Resistor | Part Number: HSC200100RJ | Internal Number: 1630019-1 | TE Connectivity
RoHS : Compliant

10 : $88.14
1 : $97.93

HSC2002R7J

TE Connectivity

HSC200 2R7 5% Resistance Value: 2.7 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminum Housed & Hsa | 2.7 Ω Wire Wound 5 % Power Resistor | Part Number: HSC2002R7J | Internal Number: 3-1630019-2 | TE Connectivity
RoHS : Compliant

10 : $91.63
1 : $101.81

FN2230-450-99-C2022-R99

TE Connectivity

FN2230-450-99-C2022-R99 Part Number: FN2230-450-99-C2022-R99 | Internal Number: 822421-SF | TE Connectivity
RoHS : Compliant

1 : $1,430.09

Venkel Ltd.

TFCR0402-16W-C-2003FT

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;200K ;�1%
RoHS : Compliant

TFCR0402-16W-C-2032DT

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;20.3K;�0.5%
RoHS : Compliant

TFCR0402-16W-C-2051BT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;2.05K;�0.1%
RoHS : Compliant

TFCR0603-10W-C-2002BT

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;20K;�0.1%
RoHS : Compliant

TFCR0603-10W-C-2003BT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;200K;�0.1%
RoHS : Compliant

TFCR0603-10W-C-2052DT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;20.5K;�0.5%
RoHS : Compliant

TFCR0603-10W-C-20R0CT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;20R;�0.25%
RoHS : Compliant

TFCR0603-16W-C-2050CT

VENKEL LTD

Thin Film CR;0603;1/16W;�50PPM;205R;�0.25%
RoHS : Compliant

TFCR0603-16W-C-2081BT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�50PPM;2.08K;�0.1%
RoHS : Compliant

TFCR0805-10W-C-2001BT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;2K;�0.1%
RoHS : Compliant

TFCR0805-10W-C-2050DT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;205R;�0.5%
RoHS : Compliant

TFCR0805-10W-C-2051DT

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;2.05K;�0.5%
RoHS : Compliant

TFCR0805-10W-C-2080BT

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;208R;�0.1%
RoHS : Compliant

TFCR0805-10W-C-2083DT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;208K ;�0.5%
RoHS : Compliant

TFCR0805-8W-C-2033BT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�50PPM;203K ;�0.1%
RoHS : Compliant

Vyrian

LTC2000ACY-11

Analog Devices Inc

11,274

LTC2053CMS8-SYNC#TR

Analog Devices Inc

Instrumentation Amplifier, 1 Func, 20uV Offset-Max, PDSO8
RoHS : Not Compliant

11,003

LTC2052IS#TR

Analog Devices Inc

Operational Amplifier, 4 Func, 3uV Offset-Max, CMOS, PDSO14
RoHS : Not Compliant

10,541

LTC2050IS6-TRPBF

Analog Devices Inc

9,540

LTC2053IMS8#TRPBF

Analog Devices Inc

Instrumentation Amplifier, 1 Func, 20uV Offset-Max, 0.2MHz Band Width, CMOS, PDSO8
RoHS : Compliant

9,458

LTC2050HVCS6#TR

Analog Devices Inc

Operational Amplifier, 1 Func, 3uV Offset-Max, CMOS, PDSO6
RoHS : Not Compliant

8,740

LTC2051HVIMS8#TRPBF

Analog Devices Inc

Operational Amplifier, 2 Func, 3uV Offset-Max, CMOS, PDSO8
RoHS : Compliant

7,490

MTC20C2085S1TC48BA1

Micron Technology Inc

6,111

MTC20C2085S1EC48BA1

Micron Technology Inc

RoHS : Compliant

6,080

LTC2051HVIDD#TR

Analog Devices Inc

Operational Amplifier, 2 Func, 3uV Offset-Max, CMOS, PDSO8
RoHS : Not Compliant

5,793

MTC20C2085S1TC48BAX

Micron Technology Inc

5,788

LTC2050IS6#TR

Analog Devices Inc

Operational Amplifier, 1 Func, 3uV Offset-Max, CMOS, PDSO6
RoHS : Not Compliant

5,561

MTC20C2085S1EC56BAZ

Micron Technology Inc

4,983

MTC20C2085S1EC48BAZ

Micron Technology Inc

4,940

D120SC20C200QF

Mersen Electrical Power

Electric Fuse, 200A, 2000VDC, 100000A (IR), Inline/holder

2,468

Win Source Electronics

C2012X5R1H475K125AB

TDK Corporation

CAP CER 4.7UF 50V X5R 0805
RoHS : Compliant

1,535 : $0.1955
1,150 : $0.2181
890 : $0.2256
645 : $0.2331
420 : $0.2407
175 : $0.2933

272,300

C2012X7R1E105KT000N

TDK Corporation

RoHS : Compliant

15,960 : $0.0188
11,965 : $0.0209
9,260 : $0.0216
6,700 : $0.0224
4,330 : $0.0231
1,780 : $0.0281

71,510

DSPIC33FJ64MC204T-I/PT

Microchip Technology Inc

IC MCU 16BIT 64KB FLASH 44TQFP / dsPIC series Microcontroller IC 16-Bit 40 MIPs 64KB (64K x 8) FLASH 44-TQFP (10x10)
RoHS : Compliant

47 : $7.1964
38 : $7.489
29 : $7.7815
21 : $8.3666
13 : $8.6592
7 : $9.2443

54,220

C2012X7S2A105KT000N

TDK Corporation

Multilayer Ceramic Capacitors MLCC - SMD/SMT 1uF 100V 0805 RoHS
RoHS : Compliant

3,155 : $0.0952
2,355 : $0.1062
1,820 : $0.1099
1,325 : $0.1135
855 : $0.1172
355 : $0.1428

45,000

DS28EC20+

Maxim Integrated Products

EEPROM Serial-1Wire 20K-bit 80Pages x 256 5V 3-Pin TO-92
RoHS : Compliant

126 : $2.3922
94 : $2.6682
73 : $2.7602
53 : $2.8522
34 : $2.9442
14 : $3.5882

35,700

LBZX84C20LT1G

onsemi

16,855 : $0.0178
12,565 : $0.0199
9,710 : $0.0206
7,045 : $0.0213
4,570 : $0.0219
1,875 : $0.0267

30,000

HVCC203Y6P102MEAX

Vishay Huntington

HVCC 20KVDC 1000PF 20% Y6P BULK / 1000 pF ±20% 20000V (20kV) Ceramic Capacitor Y6P Radial, Disc

90 : $3.3485
67 : $3.7349
52 : $3.8637
38 : $3.9925
25 : $4.1213
10 : $5.0228

5,000

BZT52H-C20

Nexperia

Single Zener diodes in a SOD123F package
RoHS : Compliant

1,525 : $0.2204
1,225 : $0.2294
940 : $0.2383
660 : $0.2563
425 : $0.2652
200 : $0.2831

4,750

LTC2053IMS8#TRPBF

Linear Technology

IC OPAMP CHOPPER 200KHZ 8MSOP
RoHS : Compliant

26 : $11.8182
19 : $13.1819
15 : $13.6364
11 : $14.091
7 : $14.5455
3 : $17.7273

4,530

LM4040C20IDBZE

Texas Instruments

1,015 : $0.3313
815 : $0.3447
630 : $0.3582
440 : $0.3852
285 : $0.3986
135 : $0.4255

4,470

LTC2051HVIMS8#TRPBF

Linear Technology

IC OPAMP CHOPPER 3MHZ RRO 8MSOP
RoHS : Compliant

42 : $8.019
34 : $8.3449
26 : $8.6708
19 : $9.3228
12 : $9.6488
6 : $10.3008

3,230

CD74AC20M

Texas Instruments

IC GATE NAND 2CH 4-INP 14SOIC / NAND Gate IC 2 Channel 14-SOIC
RoHS : Compliant

380 : $0.7911
285 : $0.8824
220 : $0.9128
160 : $0.9432
105 : $0.9736
45 : $1.1866

2,870

TSC2006IRTJTG4

Texas Instruments

IC TOUCH SCREEN 12BIT SER 20QFN
RoHS : Compliant

260 : $1.173
195 : $1.3083
150 : $1.3534
110 : $1.3985
70 : $1.4437
30 : $1.7594

2,780

EP1K100QC208-2

Intel Corporation

IC FPGA 147 I/O 208QFP
RoHS : Not Compliant

1 : $1,969.697

200

EP1C20F324I7

Altera Corporation

IC FPGA 233 I/O 324FBGA
RoHS : Not Compliant

3 : $141.2538
2 : $157.5523
1 : $162.9851

195

Wuhan P&S

1.5SMC200A-E3/9AT

Vishay Intertechnologies

Surface Mount Transient Voltage Suppressors, 1500W
RoHS : Compliant

1 : $0.6706
100 : $0.2419
500 : $0.1739
1,000 : $0.1608

791,000

MMA02040C2008FB300

Vishay Intertechnologies

MMA 0204-50 1% BL 2R0
RoHS : Compliant

1 : $0.25
100 : $0.09
500 : $0.08
1,000 : $0.08

6,000

VS-C20CP07L-M3

Vishay Intertechnologies

650V Power SiC Merged PIN Schottky Diode, 2x10A
RoHS : Compliant

1 : $9.82
100 : $3.54
500 : $2.56
1,000 : $2.36

2,000

STPSC20H065CWY

STMicroelectronics

-
RoHS : Compliant

1 : $30.42
100 : $10.14
500 : $9.38
1,000 : $9.13

STPSC20H12WL

STMicroelectronics

1200V PWR Schottky Silicon Carbide Diode
RoHS : Compliant

1 : $6.54
100 : $6.54
500 : $6.54
1,000 : $6.54

C20-R033M-R Verteiler

Link URL