 |
Datenblatt-Suchmaschine für elektronische Bauteile |
|
|
Datenblatt-Suchmaschine für elektronische Bauteile |
|
C35-R47K Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
 Newark | MRS25000C3572FCT00 | Vishay Intertechnologies | Res, 35K7, 1%, 600Mw, Axial, Metal Film; |Vishay MRS25000C3572FCT00 RoHS : Compliant |
| 9,970 | |
| KSC351G LFS | C&K Switches | Tactile Switch Round Button Top Actuated; |C&k Components KSC351G LFS RoHS : Compliant |
| 4,027 | ||
| KSC351G LFS | C&K Switches | Tactile Switch Round Button Top Actuated; |C&k Components KSC351G LFS RoHS : Compliant |
| 4,027 | ||
| SC3505 | Fairview Microwave Inc | Rf/Coaxial Connector, Sma Coaxial; |Fairview Microwave SC3505 RoHS : Compliant |
| 119 | ||
| LTC3561EDD#PBF | Analog Devices Inc | Dc/Dc Conv, Sync Buck, 1Mhz, 125Deg C; |Analog Devices, Inc. LTC3561EDD#PBF RoHS : Compliant |
| 68 | ||
| C35 | Fluke Corporation | Test Accessory, Soft Carrying Case; |Fluke Electronics C35 RoHS : Not Compliant |
| 8 | ||
| SF526S/11PC35/21PC35/500MM | HUBER+SUHNER | Rf Cable, 3.5Mm Plug-3.5Mm Jack, 500Mm; |Huber+Suhner SF526S/11PC35/21PC35/500MM RoHS : Compliant |
| 6 | ||
| SF526S/11PC35/11PC35/2000MM | HUBER+SUHNER | Rf Cable, 3.5Mm Plug-3.5Mm Plug, 2M; |Huber+Suhner SF526S/11PC35/11PC35/2000MM RoHS : Compliant |
| 3 | ||
| 104713-HMC358MS8G | Analog Devices Inc | Eval Brd, Heterojunc Bipol Trans Vco; |Analog Devices, Inc. 104713-HMC358MS8G RoHS : Compliant |
| 2 | ||
| SF526E/11PC35/11PC35/36IN | HUBER+SUHNER | Cbl Assy, Pc3.5 Plug-Pg, 50 Ohm, 914.4Mm; |Huber+Suhner SF526E/11PC35/11PC35/36IN RoHS : Compliant |
| 2 | ||
| PMA SF526E/11PC35/11PC35/36IN | HUBER+SUHNER | \\bl Assy, Pc3.5 Plug-Pg, 50 Ohm, 914.4Mm; |Huber+Suhner PMA SF526E/11PC35/11PC35/36IN RoHS : Compliant |
| 2 | ||
| SF526E/11PC35/11PC35/24IN | HUBER+SUHNER | Cbl Assy, Pc3.5 Plug-Plug, 50 Ohm, 610Mm; |Huber+Suhner SF526E/11PC35/11PC35/24IN RoHS : Compliant |
| 1 | ||
| SF526S/11PC35/11PC35/36IN | HUBER+SUHNER | Rf Cable, 3.5Mm Plug-3.5Mm Plug, 36"; |Huber+Suhner SF526S/11PC35/11PC35/36IN RoHS : Compliant |
| 1 | ||
| SF526S/11PC35/11PC35/1000MM | HUBER+SUHNER | Rf Cable, 3.5Mm Plug-3.5Mm Plug, 1M; |Huber+Suhner SF526S/11PC35/11PC35/1000MM RoHS : Compliant |
| 1 | ||
| PMA SF526E/11PC35/11PC35/24IN | HUBER+SUHNER | Cbl Assy, Pc3.5 Plug-Plug, 50 Ohm, 610Mm; |Huber+Suhner PMA SF526E/11PC35/11PC35/24IN RoHS : Compliant |
| 1 | ||
 RS | 2904945 (STEP-PS/277AC/24DC/3.5) | Phoenix Contact | POWER SUPPLY, AC-DC, 24VDC/3.5A, 1 PHASE, STEP-PS/277AC/24DC/3.5, GEN 2 |
| 1,092 | |
| GBPC3510W-E4/51 (GBPC3510W-E4\\51) | Vishay Semiconductors | DIODE, BRIDGE RECTIFIER, STANDARD, VR 1000V, IF 35A, PKG GBPC-W, CONFIG SINGLE PHASE |
| 259 | ||
| GBPC3504-E4/51 (GBPC3504-E4\\51) | Vishay Semiconductors | DIODE, BRIDGE RECTIFIER, STANDARD, VR 400V, IF 35A, PKG GBPC, CONFIG SINGLE PHASE |
| 251 | ||
| GBPC3506-E4/51 (GBPC3506-E4\51) | Vishay Semiconductors | DIODE, BRIDGE RECTIFIER, STANDARD, VR 600V, IF 35A, PKG GBPC, CONFIG SINGLE PHASE |
| 204 | ||
| CR123C356A (123C356A) | ABB Industrial Connection and Solution | OVERLOAD RELAY HEATER, CLASS 20, 2.88A MAX FULL-LOAD, PANEL MOUNT, NEMA 1, 6, 7 |
| 65 | ||
| KBPC35005 | HVCA & CKE | BRIDGE RECTIFIER; 50V; 400A; 35V; 35A |
| 46 | ||
REC3.5-2415DRW/R10/A | RECOM Power GmbH | DC/DC CONVERTER,18-36V,+-15VO 117MA,3.5W RoHS : Compliant |
| 30 | ||
| ICN4P16TLEDHLSC35M (913701266902) | Advance by Signify | TLED DRIVER, LED 4 LAMP TLED DRIVER 16W T8 HL 120 TO 277 VOLT |
| 20 | ||
| LPC-35-700 | Mean Well | POWER SUPPLY, AC-DC,48V,0.7A,100-264VIN, ENCAPSULATED, PFC, LED DRIVER, LPC-35 SERIES RoHS : Compliant |
| 3 | ||
| PMA SF126E/11PC35/11PC35/914MM (85079122) | HUBER+SUHNER | PMA SF126E11PC3511PC35914MM |
| 3 | ||
| FC 351-1 | Pizzato Elettrica Srl | POSITION SWITCH WITH ROLLER LEVER |
| 2 | ||
| SC3.5-G-N0-6M (114211) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR, NAMUR, 114211 |
| 1 | ||
| MXDC35C1T2HS2 (MXDC35C1T2PS2) | IKO International Inc | LINEAR ROLLER WAY, C-LUBE MAINTENANCE FREE, BLOCK STYLE SHORT BLOCK, MEDIUM PRE |
| 1 | ||
| SF104/11PC35/11PC35/500MM (84017154) | HUBER+SUHNER | RF CABLE ASSY, TEST CABLE 26.5 GHZ, SUCOFLEX 104, 3.5MM M/3.5MM M, 500MM |
| 1 | ||
| C35 | Bogen Communications Inc | AMPLIFIER, 35 W, 70 TO 16 KHZ (+/- 2 DB) @ 1% (MAX.) (TRANSFORMER), 85 W, SCREW |
| 0 | ||
 Microchip Technology Inc | 2C3501 | Microchip Technology Inc | Small-Signal BJT _ Die, Projected EOL: 2049-02-05 |
| 5,424 | |
| EV34C35A | Microchip Technology Inc | DAC based 4-20mA Current Loop, Projected EOL: |
| 63 | ||
| 2C3500 | Microchip Technology Inc | Small-Signal BJT _ Die, Projected EOL: 2049-02-05 |
| 0 | ||
| 2C3585 | Microchip Technology Inc | Power BJT _ Die, Projected EOL: 2049-02-05 |
| 0 | ||
| MIC35302WD | Microchip Technology Inc | TR Only; Removed July 1 2010 DCPL, TO-252, Projected EOL: 2041-02-28 - Contact for Pricing RoHS : Compliant | 0 | |||
| 2C3501-MSCL | Microchip Technology Inc | Small-Signal BJT _ Die, Projected EOL: 2049-02-05 |
| 0 | ||
| VOP-ESCC_3501_CHART_II | Microchip Technology Inc | ESCC Generic Spec. No. 3501 Chart II, Projected EOL: 2050-11-23 - Contact for Pricing | 0 | |||
| VOP-ESCC_3501_CHART_III | Microchip Technology Inc | ESCC Generic Spec. No. 3501 Chart III, Projected EOL: 2050-11-19 - Contact for Pricing | 0 | |||
| TC-350-DAC-106A-80M0000000 | Microchip Technology Inc | TC-350-DAC-106A-80M0000000, Projected EOL: 2028-11-17 - Contact for Pricing | 0 | |||
| TC-350-CAF-206F-10M0000000 | Microchip Technology Inc | TC-350-CAF-206F-10M0000000, Projected EOL: 2050-11-17 - Contact for Pricing | 0 | |||
| TC-350-CAF-106A-10M0000000 | Microchip Technology Inc | TC-350-CAF-106A-10M0000000, Projected EOL: 2028-11-17 - Contact for Pricing | 0 | |||
| TC-350-CAF-106A-70M0000000 | Microchip Technology Inc | TC-350-CAF-106A-70M0000000, Projected EOL: 2028-11-17 - Contact for Pricing | 0 | |||
| TC-350-DAC-507A-27M0000000 | Microchip Technology Inc | TC-350-DAC-507A-27M0000000, Projected EOL: 2028-11-17 - Contact for Pricing | 0 | |||
| VOP-ESCC_3501_QUAL_LVT_TESTS | Microchip Technology Inc | ESCC Generic Spec. No. 3501 QUAL LVT TESTS, Projected EOL: 2050-11-23 - Contact for Pricing | 0 | |||
| VOP-ESCC_3501_SCREENING_TESTS | Microchip Technology Inc | ESCC Generic Spec. No. 3501 SCREENING TEST, Projected EOL: 2050-11-23 - Contact for Pricing | 0 | |||
 ComSIT USA | L1282795RC35000T1B27QB | Lumileds | LED RoHS : Compliant | 16,000 | ||
| PC354NJ0000F | Sharp Microelectronics of the Americas | AC Input-Transistor Output Optocoupler, 1-Element, 3750V Isolation RoHS : Compliant | 4,305 | |||
| SMM02040C3579FB300 | Vishay Intertechnologies | THIN FILM MINI MELF RESISTOR Fixed Resistor, Thin Film, 0.25W, 35.7ohm, 200V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 1406 RoHS : Compliant | 3,000 | |||
UC3573DTR | Texas Instruments | BUCK PULSE WIDTH MODULATOR STEPDOWN VOLTAGE REGULATOR Switching Controller, Voltage-mode, 0.7A, 115kHz Switching Freq-Max, BIPolar, PDSO8 RoHS : Compliant | 1,765 | |||
| LTC3559EUD1PBF | Linear Technology | LINEAR USB BATTERY CHARGER WITH DUAL BUCK REGULATOR Power Supply Support Circuit, Adjustable, 1 Channel, CMOS, PQCC16 RoHS : Compliant | 484 | |||
| GBPC3510W | Diodes Incorporated | 35 A GLASS PASSIVATED BRIDGE RECTIFIER Bridge Rectifier Diode, 1 Phase, 35A, 1000V V(RRM), Silicon RoHS : Compliant | 300 | |||
| LTC3560ES6TRMPBF | Linear Technology | 2.25 MHZ, 800 MILLI AMP SYNCHRONOUS STEP-DOWN REGULATOR IN THINSOT Switching Regulator, Current-mode, 2.1A, 2700kHz Switching Freq-Max, PDSO6 RoHS : Compliant | 270 | |||
| GBPC3510WE451 | Vishay Intertechnologies | GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER Bridge Rectifier Diode, 1 Phase, 35A, 1000V V(RRM), Silicon RoHS : Compliant | 98 | |||
| KBPC3506WBP | PanJit Semiconductor | SILICON BRIDGE RECTIFIER DIODE Bridge Rectifier Diode, 1 Phase, 35A, 600V V(RRM), Silicon RoHS : Compliant | 50 | |||
| UC3526ADW | Unitrode Corporation | REGULATING PULSE WIDTH MODULATOR Switching Controller, Voltage-mode, 0.2A, 650kHz Switching Freq-Max, CMOS, PDSO18 RoHS : Not Compliant | 26 | |||
| LTC3545EUDPBF | Linear Technology | TRIPLE 800 MILLIAMP SYNCHRONOUS STEP-DOWN REGULATOR-2.25MHZ Switching Regulator, Current-mode, 1.6A, 2700kHz Switching Freq-Max, PQCC16 RoHS : Compliant | 12 | |||
| LC3564S10 | SANYO Semiconductor Co Ltd | 64K (8192-WORD X 8-BIT) SRAM Standard SRAM, 8KX8, 500ns, CMOS, PDIP28 RoHS : Not Compliant | 12 | |||
| RAC3515SK277 | RECOM Power GmbH | AC-DC converter, 15W, Recom, SIP7 package RoHS : Compliant | 12 | |||
| EPF10K100ABC3562 | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE FAMILY Loadable PLD, 0.7ns, CMOS, PBGA356 RoHS : Not Compliant | 7 | |||
| NL3224BC3520 | NEC Electronics Group | Optoelectronic Device RoHS : Not Compliant | 2 | |||
 Interstate Connecting Components | APSLS-N-BL-C35-M40S | Amphenol Oil & Gas Technology | BLUE 35MM CRIMP TERMINATION 5 | 0 | ||
| NLDFT-2-BK-L-C35-M40S | ITT Interconnect Solutions | NLDFT-2-BK-L-C35-M40S | 0 | |||
| Y66561WC35SN100000 | TE Connectivity | RECP ASSY | 0 | |||
| YACT26JC35JBV00100 | TE Connectivity | STRAIGHT PLUG RoHS : Not Compliant | 0 | |||
| SNLM-P-C35-25S-GY | ITT Interconnect Solutions | SNLM-P-C35-25S-GY RoHS : Compliant | 0 | |||
| J599ECF5705C35 | SOURIAU-SUNBANK | J59181 | 0 | |||
| APSLS-1-BN-C35-M40S | Amphenol Oil & Gas Technology | BROWN 35MM CRIMP TERMINATION | 0 | |||
| HVBI703R8AFCFPUPC35L00 | Amphenol PCD | HVBI R8 SINGLE POLE STRAIGHT P | 0 | |||
| SNLM-P-C35-25L-GY | ITT Interconnect Solutions | SNLM-P-C35-25L-GY | 0 | |||
| MWDL-21P-5C3-.500B | Glenair Inc | 0 | ||||
| MWDM1L-37S-5C3-.500P | Glenair Inc | RoHS : Not Compliant | 0 | |||
| NLS-E-GN-C35-M40S | ITT Interconnect Solutions | NLS-E-GN-C35-M40S RoHS : Compliant | 0 | |||
| YACT20MC35SN000000 | TE Connectivity | SQUARE FLANGE RECETACLE RoHS : Compliant | 0 | |||
| YACT26JC35SNV00100 | TE Connectivity | STRAIGHT PLUG RoHS : Not Compliant | 0 | |||
| J599ECF5735C35 | SOURIAU-SUNBANK | J59181 | 0 | |||
 Richardson RFPD | SF126E/11PC35/21PC35/36.0IN | HUBER+SUHNER | SUCOFLEX126.11_PC35-43 on both ends,L 36"/914.0mm RoHS : Not Compliant | 0 | ||
| SF526E/11PC35/21PC35/36.0IN | HUBER+SUHNER | SUCOFLEX526E,11 PC35-510, 21 PC35-507,L 36' RoHS : Not Compliant | 0 | |||
| SF526E/11PC35/21PC35/48.0IN | HUBER+SUHNER | SUCOFLEX526E,11 PC35-510, 21 PC35-507,L 48" RoHS : Not Compliant | 0 | |||
| SF126E/11PC35/21PC35/48.0IN | HUBER+SUHNER | SUCOFLEX126EN11PC35-43, 21 PC35-43,L 48"/1219.0mm RoHS : Not Compliant | 0 | |||
| 24_PC35-50-3-2/199_UE | HUBER+SUHNER | Straight bulkhead cable jackARTICLE# 84009383 RoHS : Not Compliant | 0 | |||
403C35D36M00000 | CTS Corporation | Crystal 36MHz ±30ppm (Tol) ±50ppm (Stability) 18pF RoHS : Compliant |
| 0 | ||
| 406C35B14M31818 | CTS Corporation | Crystal 14.31818MHz ±30ppm (Tol) ±50ppm (Stability RoHS : Compliant |
| 0 | ||
| REC3.5-0505DRW/R8/A/X1 | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT -5V/5V -0.35A/0.35A 3.5W 6 RoHS : Compliant |
| 0 | ||
| REC3.5-0512DRW/R8/A/CTRL | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT -12V/12V -0.145A/0.145A 3. RoHS : Compliant |
| 0 | ||
| REC3.5-0515DRW/R10/C | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT -15V/15V -0.117A/0.117A 3. RoHS : Compliant |
| 0 | ||
| REC3.5-1205SRW/R10/C/X1 | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 5V 0.7A 3.5W 9-Pin DIP Tu RoHS : Compliant |
| 0 | ||
| REC3.5-1215SRW/R8/C/X1 | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 15V 0.233A 3.5W 9-Pin DIP RoHS : Compliant |
| 0 | ||
| REC3.5-2412SRW/R8/A | RECOM Power GmbH | Module DC-DC 24VIN 1-OUT 12V 0.29A 3.5W 6-Pin DIP RoHS : Compliant |
| 0 | ||
| REC3.5-2424SRW/R10/C/X1 | RECOM Power GmbH | Module DC-DC 24VIN 1-OUT 24V 0.145A 3.5W 9-Pin DIP RoHS : Compliant |
| 0 | ||
| REC3.5-4809SRW/R8/C | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 9V 0.388A 3.5W 9-Pin DIP RoHS : Compliant |
| 0 | ||
 DB Roberts | SHC356X1/4-SS | SOCKET HEAD CAP SCR | Socket Head Cap Screw |
| 200 | |
| D5-PFSC35-38ADZBB | Southco |
| 21 | |||
| D5-PFSC35-41AMBNA | Southco | D5-PFSC35-41AMBNA | 0 | |||
| D5-PFSC35-41AZYTNA | Southco | D5-PFSC35-41AZYTNA | 0 | |||
| D5-PFSC35-44ABTNA | Southco | D5-PFSC35-44ABTNA | 0 | |||
| D5PFSC3544CP2SEBNA | Southco | D5PFSC3544CP2SEBNA | 0 | |||
| D5-PC35X547-1CBCNA | Southco | D5-PC35X547-1CBCNA | 0 | |||
| D5-PC35ZBTNA | Southco | D5-PC35ZBTNA | 0 | |||
| D5-PFSC35-37AKBBNA | Southco | D5-PFSC35-37AKBBNA | 0 | |||
| D5-PFSC35-38AETGNA | Southco | D5-PFSC35-38AETGNA | 0 | |||
| D5-PFSC35-38AZCCNA | Southco | 0 | ||||
| D5-PFSC35-41ASEG | Southco | 0 | ||||
| D5-PFSC35-42AEBTNA | Southco | D5-PFSC35-42AEBTNA | 0 | |||
| D5-PFSC35-42AZBB | Southco | 0 | ||||
| D5-PFSC35-43ASEBNA | Southco | D5-PFSC35-43ASEBNA | 0 | |||
 Pasternack Enterprises US | PE3C3547LF/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to Reverse Polarity TNC Plug Low Loss Cable 12 Inch Length Using LMR-240 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to reverse polarity TNC plug low loss cable 12 inch length using LMR-240 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to reverse polarity TNC plug low loss cable 12 inch length using LMR-240 coax with heatshrink, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and reverse polarity TNC cable connection on the other. Our low loss type N to reverse polarity TNC cable assemblies have a male gender on end 1 and plug on end 2. PE3C3547LF/HS-12 can also be known as a low loss type N plug to reverse polarity TNC male cable assembly and will be shipped same-day as it is purchased. Type N plug to reverse polarity TNC male cable assembly PE3C3547LF/HS-12 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to reverse polarity TNC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3547LF/HS-12 can also be used in the other direction and will be reverse polarity TNC plug to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC reverse polarity male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to reverse polarity TNC plug low loss cable 12 inch length using LMR-240 coax with heatshrink, LF solder. |
| 1,570 | |
| PE3C3510LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to BNC Male Cable 12 Inch Length Using RG188-DS Coax, LF Solder., Radio frequency assembly SMA male to BNC male cable 12 inch length using RG188-DS coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to BNC male cable 12 inch length using RG188-DS coax, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C3510LF-12 can also be known as a SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C3510LF-12 is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3510LF-12 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male cable 12 inch length using RG188-DS coax, LF solder. |
| 591 | ||
| PE3C3513-24 | Pasternack Enterprises |
| 425 | |||
| PE3C3571-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to SMA Male Right Angle Cable 24 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly SMA male right angle to SMA male right angle cable 24 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male right angle cable 24 inch length using PE-SR402FLJ coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C3571-24 can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C3571-24 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable 24 inch length using PE-SR402FLJ coax. |
| 91 | ||
| PE3C3511LF-48 | Pasternack Enterprises |
| 0 | |||
| PE3C3512/HS | Pasternack Enterprises | 0 | ||||
| PE3C3514-72 | Pasternack Enterprises |
| 0 | |||
| PE3C3529 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to BNC Male Cable Using RG316-DS Coax., Radio frequency assembly SMA female bulkhead to BNC male cable using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to BNC male cable using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assembly has female gender on end 1 and male on end 2. PE3C3529 can also be known as a SMA jack to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA jack to BNC plug cable assembly PE3C3529 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C3529 RF cable are available on our downloadable PDF datasheet.PE3C3529 can also be used in the other direction and will be BNC male to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. | 0 | |||
| PE3C3574 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50. Push-On SMP Male 2 Hole Flange to SMP Female Cable Using RG405 Coax. PE3C3574 is a SMP male 2 hole flange to SMP female cable using RG405 coax. This Pasternack SMP male 2 hole flange to SMP female cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMP for connector 2. Our male SMP 2 hole flange to female SMP cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C3574 SMP male 2 hole flange to SMP female cable assembly is constructed with RG405 coax. | 0 | |||
| PE3C3584/PH180-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 60 inches. Push-On SMP Female Right Angle to Push-On SMP Female Right Angle Cable 60 Inch Length Using RG316 Coax with 180 Deg. Clock., Radio frequency assembly push-on SMP female right angle to push-on SMP female right angle cable 60 inch length using RG316 coax with 180 deg. clock from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Push-on SMP female right angle to push-on SMP female right angle cable 60 inch length using RG316 coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE3C3584/PH180-60, can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C3584/PH180-60 is built with RG316 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female right angle to push-on SMP female right angle cable 60 inch length using RG316 coax with 180 deg. clock. |
| 0 | ||
| PE3C3508-48 | Pasternack Enterprises |
| 0 | |||
| PE3C3527LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. BNC Male to TNC Male Cable Using RG316-DS Coax, LF Solder. PE3C3527LF is a BNC male to TNC male cable using RG316-DS coax. This Pasternack BNC male to TNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm TNC for connector 2. Our male BNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3527LF BNC male to TNC male cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE3C3527LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. TNC Male to BNC Male Cable Using RG316-DS Coax with HeatShrink, LF Solder. PE3C3527LF/HS is a TNC male to BNC male cable using RG316-DS coax. This Pasternack TNC male to BNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm BNC for connector 2. Our male TNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3527LF/HS TNC male to BNC male cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE3C3529-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female Bulkhead to BNC Male Cable 36 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA female bulkhead to BNC male cable 36 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to BNC male cable 36 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assembly has female gender on end 1 and male on end 2. PE3C3529-36 can also be known as a SMA jack to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA jack to BNC plug cable assembly PE3C3529-36 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C3529-36 RF cable are available on our downloadable PDF datasheet.PE3C3529-36 can also be used in the other direction and will be BNC male to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3529LF-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Male to SMA Female Bulkhead Cable 36 Inch Length Using RG316-DS Coax, LF Solder., Radio frequency assembly BNC male to SMA female bulkhead cable 36 inch length using RG316-DS coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to SMA female bulkhead cable 36 inch length using RG316-DS coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a SMA bulkhead cable connection on the other. Our BNC to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3C3529LF-36 can also be known as a BNC plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.57-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3529LF-36 RF cable has a FEP jacket of 0.114-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 85 dB. Our BNC male to bulkhead SMA female cable has a maximum VSWR of 1.5:1. BNC plug to SMA jack cable assembly PE3C3529LF-36 is built with RG316-DS which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C3529LF-36 can also be used in the other direction and will be a SMA female bulkhead to BNC male cable assembly if the opposite connectivity is required. BNC plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA RF cable assembly as per your requirements. |
| 0 | ||
 Venkel Ltd. | MELFC0102-UC-3572DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�50PPM;35.7K;�0.5% RoHS : Compliant | 0 | ||
| HPTF0805-TC-3571CT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�50PPM;3.57K;�0.25% RoHS : Compliant | 0 | |||
| MEHF0102-UC-35R7FT | VENKEL LTD | High Frequency MELF;0102;1/5W;�50PPM;35.7R�1% RoHS : Not Compliant | 0 | |||
| MELFC0204-TC-3571BT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�50PPM;3.57K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-VC-3572BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�50PPM;35.7K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-XC-3570BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�50PPM;357R;�0.1% RoHS : Compliant | 0 | |||
| MELFM0207-XC-3572FT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�50PPM;35.7K;�1% RoHS : Not Compliant | 0 | |||
| MELFM0207-XC-35R7DT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�50PPM;35.7R;�0.5% RoHS : Not Compliant | 0 | |||
| TFCR0201-32W-C-3570CT | VENKEL LTD | Thin Film CR;0201;1/32W;�50PPM;357R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-3521BT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;3.52K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-3523CT | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;352K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-3570DT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;357R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-3523BT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;352K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-3571DT | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;3.57K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-3572DT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;35.7K;�0.5% RoHS : Compliant | 0 | |||
 Vyrian | SN74HC352N-10 | Texas Instruments | Multiplexer, HC/UH Series, 2-Func, 4 Line Input, 1 Line Output, Inverted Output, CMOS, PDIP16 | 7,956 | ||
| MT5C6406EC-35LAT | Micron Technology Inc | Standard SRAM, 16KX4, 35ns, CMOS, CQCC28 RoHS : Not Compliant | 7,190 | |||
| MT5C2561C-35 | Micron Technology Inc | Standard SRAM, 256KX1, 35ns, CMOS, CDIP24 RoHS : Not Compliant | 7,119 | |||
| MT52C9042C35 | Micron Technology Inc | RoHS : Not Compliant | 7,080 | |||
| MT5C2568EC35P/883C | Micron Technology Inc | Standard SRAM, 32KX8, 35ns, CMOS, CQCC28 RoHS : Not Compliant | 6,706 | |||
| MT5C6406EC-35AT | Micron Technology Inc | Standard SRAM, 16KX4, 35ns, CMOS, CQCC28 RoHS : Not Compliant | 6,312 | |||
| MT5C6407C-35AT | Micron Technology Inc | Standard SRAM, 16KX4, 35ns, CMOS, CDIP28 RoHS : Not Compliant | 6,011 | |||
| MT5C1604C-35AT | Micron Technology Inc | Standard SRAM, 4KX4, 35ns, CMOS, CDIP20 RoHS : Not Compliant | 4,756 | |||
| MT5C6407EC-35LXT | Micron Technology Inc | Standard SRAM, 16KX4, 35ns, CMOS, CQCC28 RoHS : Not Compliant | 4,725 | |||
| MT52C9005EC35 | Micron Technology Inc | RoHS : Not Compliant | 4,247 | |||
| MT5C6407EC-35XT | Micron Technology Inc | Standard SRAM, 16KX4, 35ns, CMOS, CQCC28 RoHS : Not Compliant | 4,074 | |||
| MT5C1608EC-35L883C | Micron Technology Inc | Standard SRAM, 2KX8, 35ns, CMOS, CQCC28 RoHS : Not Compliant | 3,868 | |||
| SN54HC352J | Texas Instruments | Multiplexer, 2-Func, 4 Line Input, CMOS, CDIP16 RoHS : Not Compliant | 3,546 | |||
| MT5C2564C-35LIT | Micron Technology Inc | Standard SRAM, 64KX4, 35ns, CMOS, CDIP24 RoHS : Not Compliant | 2,700 | |||
| MT5C2561C35/883C | Micron Technology Inc | Standard SRAM, 256KX1, 35ns, CMOS, CDIP24 RoHS : Not Compliant | 2,566 | |||
 Waytek, Inc. | BK/ATC-35 | Eaton Electronics | 35 Amp Blue Green ATC Fuse |
| 1,208 | |
 Win Source Electronics | PC354NJ0000F | Sharp Microelectronics of the Americas | OPTOISOLATOR 3.75KV TRANS 4-SMD |
| 56,242 | |
| TC358840XBG | Toshiba America Electronic Components | RoHS : Compliant |
| 49,105 | ||
| TC358762XBG | Toshiba America Electronic Components | Display Driver 1.3V 64-Pin RoHS : Compliant |
| 39,640 | ||
1.5SMC350CA | Littelfuse Inc | TVS DIODE 300VWM 482VC DO214AB RoHS : Compliant |
| 32,778 | ||
| FDC3535-NL | Fairchild Semiconductor Corporation |
| 25,080 | |||
LTC3564EDCB#TRPBF | Linear Technology | IC REG BUCK ADJ 1.25A SYNC 6DFN / Conv DC-DC 2.5V to 5.5V Synchronous Step Down Single-Out 0.6V to 5.5V 1.25A 6-Pin DFN EP T/R RoHS : Compliant |
| 18,910 | ||
| LTC3549EDCB#TRMPBF | Linear Technology | IC REG BUCK ADJ 0.25A SYNC 6DFN / Conv DC-DC 1.6V to 5.5V Synchronous Step Down Single-Out 0.611V to 5.5V 0.25A 6-Pin DFN EP T/R RoHS : Compliant |
| 8,253 | ||
LTC3533EDE#TRPBF | Linear Technology | IC REG BCK BST ADJ 2A SYNC 14DFN / Conv DC-DC 1.8V to 5.5V Synchronous Non-Inverting/Inverting/Step Up/Step Down Single-Out 1.8V to 5.25V 2A 14-Pin DFN EP T/R RoHS : Compliant |
| 4,190 | ||
| KPC357NT0B | Cosmo Electronics | RoHS : Compliant |
| 2,957 | ||
| BC358239A-INN-E4 | Qualcomm | IC RF TXRX+MCU BLUETOOTH 96LFBGA RoHS : Compliant |
| 2,550 | ||
LTC3539EDCB#TRPBF | Linear Technology | IC REG BOOST ADJUSTABLE 2A 8DFN RoHS : Compliant |
| 2,250 | ||
| LTC3538EDCB | Analog Devices Inc | IC REG BCK BST ADJ 800MA 8DFN RoHS : Not Compliant |
| 1,768 | ||
| LTC3538EDCB#TRMPBF | Linear Technology | IC REG BUCK BOOST ADJ 0.8A 8DFN RoHS : Compliant |
| 1,630 | ||
LTC3525ESC6-3.3#TRMPBF | Linear Technology | IC REG BOOST 3.3V 140MA SC70-6 RoHS : Compliant |
| 1,410 | ||
LTC3561EDD#PBF | Linear Technology | IC REG BUCK ADJ 1A SYNC 8DFN RoHS : Compliant |
| 393 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
German ▼ 
English
Chinese
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand