 |
Datenblatt-Suchmaschine für elektronische Bauteile |
|
|
Datenblatt-Suchmaschine für elektronische Bauteile |
|
C373G-R20-R Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
 Master Electronics | MM74HC373WM | onsemi | 3-STATE Octal D-Type Latch RoHS : Compliant |
| 1,330 | |
| MIC37302WR-TR | Microchip Technology Inc | LDO Regulator Pos 1.24V to 5.5V 3A 6-Pin(5+Tab) SPAK T/R RoHS : Compliant |
| 750 | ||
| MIC37302WR | Microchip Technology Inc | LDO Regulator Pos 1.24V to 5.5V 3A 6-Pin(5+Tab) SPAK Tube RoHS : Compliant |
| 288 | ||
| MIC37301-1.5WR-TR | Microchip Technology Inc | 3A Low Voltage LDO Regulator RoHS : Compliant |
| 0 | ||
MIC37303YME-TR | Microchip Technology Inc | 3A Low Voltage uCap LDO Regulator RoHS : Compliant |
| 0 | ||
MC74HC373ADTG | onsemi | Octal 3-State Non-Inverting Transparent Latch RoHS : Compliant |
| 0 | ||
| MIC37300-2.5WR | Microchip Technology Inc | LDO Regulator Pos 2.5V 3A 4-Pin(3+Tab) SPAK Tube RoHS : Compliant |
| 0 | ||
| MC74HC373ADTR2G | onsemi | Octal 3-State Non-Inverting Transparent Latch RoHS : Compliant |
| 0 | ||
| MIC37300-1.8WR-TR | Microchip Technology Inc | LDO Regulator Pos 1.8V 3A 4-Pin(3+Tab) SPAK T/R RoHS : Compliant |
| 0 | ||
| MIC37301-1.8WR | Microchip Technology Inc | LDO Regulator Pos 1.8V 3A 6-Pin(5+Tab) SPAK Tube RoHS : Compliant |
| 0 | ||
| MIC37301-3.3WR | Microchip Technology Inc | LDO Regulator Pos 3.3V 3A 6-Pin(5+Tab) SPAK Tube RoHS : Compliant |
| 0 | ||
| MM74HC373MTC | onsemi | 3-STATE Octal D-Type Latch RoHS : Compliant |
| 0 | ||
| MIC37300-1.65WR-TR | Microchip Technology Inc | 3A Low Voltage LDO Regulator RoHS : Compliant |
| 0 | ||
| MIC37301-1.5YME | Microchip Technology Inc | LDO Regulator Pos 1.5V 3A 8-Pin SOIC N EP Tube RoHS : Compliant |
| 0 | ||
MC74AC373DWR2G | onsemi | Octal Transparent Latch with 3-State Outputs RoHS : Compliant |
| 0 | ||
 Avnet Americas | MC74HC373ADWR2G | onsemi | Latch, 74HC373, D Type Transparent, Tri State Non Inverted, 26 ns, WSOIC - Tape and Reel (Alt: MC74HC373ADWR2G) RoHS : Compliant |
| 161,000 | |
| MC74HC373ADWG | onsemi | Latch, 74HC373, Transparent, Tri State Non Inverted, 25 ns, SOIC - Rail/Tube (Alt: MC74HC373ADWG) RoHS : Compliant |
| 20,690 | ||
| MIC37301-1.5WR-TR | Microchip Technology Inc | - Tape and Reel (Alt: MIC37301-1.5WR-TR) RoHS : Compliant |
| 0 | ||
| MIC37302WR-TR | Microchip Technology Inc | - Tape and Reel (Alt: MIC37302WR-TR) RoHS : Compliant |
| 0 | ||
| MM74HC373SJ | onsemi | - Bulk (Alt: MM74HC373SJ) RoHS : Not Compliant |
| 0 | ||
| RHFAC373K02V | STMicroelectronics | RAD-HARD LOGIC ICS - Bulk (Alt: RHFAC373K02V) RoHS : Not Compliant | 0 | |||
| MIC37302WR | Microchip Technology Inc | LDO Regulator Pos 1.24V to 5.5V 3A 5-Pin SPAK - Rail/Tube (Alt: MIC37302WR) RoHS : Compliant |
| 0 | ||
| RHFAC373K1 | STMicroelectronics | - Bulk (Alt: RHFAC373K1) RoHS : Not Compliant | 0 | |||
| MIC37303YME-TR | Microchip Technology Inc | LDO Regulator Pos 1.24V to 5.5V 3A 8-Pin SOIC EP T/R - Tape and Reel (Alt: MIC37303YME-TR) RoHS : Compliant |
| 0 | ||
74HC373PW-Q100,118 | Nexperia | Latch, 74HC373, D Type Transparent, Tri State Non Inverted, 26 ns, 7.8 mA, 20 Pins, TSSOP - Tape and Reel (Alt: 74HC373PW-Q100,118) RoHS : Compliant |
| 0 | ||
| DMC3732UVTQ-7 | Diodes Incorporated | - Tape and Reel (Alt: DMC3732UVTQ-7) RoHS : Compliant |
| 0 | ||
| MC74HC373ADWR2 | onsemi | - Tape and Reel (Alt: MC74HC373ADWR2) RoHS : Not Compliant | 0 | |||
| MC74VHC373DWR2G | onsemi | - Tape and Reel (Alt: MC74VHC373DWR2G) RoHS : Compliant |
| 0 | ||
| MIC37300-2.5WR | Microchip Technology Inc | - Rail/Tube (Alt: MIC37300-2.5WR) RoHS : Compliant |
| 0 | ||
| 74ALVC373PW,118 | Nexperia | Latch, 74ALVC373, D Type Transparent, Tri State, 3.8 ns, 24 mA, 20 Pins, TSSOP - Tape and Reel (Alt: 74ALVC373PW,118) RoHS : Compliant |
| 0 | ||
 Newark | 74VHC373FT(BJ) | Toshiba America Electronic Components | Latch, D Type, Tri State, 8Bit; |Toshiba 74VHC373FT(BJ) RoHS : Compliant |
| 1,880 | |
| 74VHC373FT(BJ) | Toshiba America Electronic Components | Latch, D Type, Tri State, 8Bit; |Toshiba 74VHC373FT(BJ) RoHS : Compliant |
| 1,880 | ||
| MC74HC373ADTR2G | onsemi | Level Shifters; |Onsemi MC74HC373ADTR2G RoHS : Compliant |
| 1,590 | ||
| MC74HC373ADTR2G | onsemi | Level Shifters; |Onsemi MC74HC373ADTR2G RoHS : Compliant |
| 1,590 | ||
| MIC37302WR-TR | Microchip Technology Inc | Ldo, Adj, 1.24-5.5V, 3A, S-Pak-5; |Microchip Technology MIC37302WR-TR RoHS : Compliant |
| 1,486 | ||
| MIC37302WR-TR | Microchip Technology Inc | Ldo, Adj, 1.24-5.5V, 3A, S-Pak-5; |Microchip Technology MIC37302WR-TR RoHS : Compliant |
| 1,486 | ||
| MIC37302WR | Microchip Technology Inc | Ldo Voltage Regulator, Adjustable; |Microchip Technology MIC37302WR RoHS : Compliant |
| 732 | ||
| MC74AC373DWR2G | onsemi | Level Shifters; |Onsemi MC74AC373DWR2G RoHS : Compliant |
| 675 | ||
| MC74AC373DWR2G | onsemi | Level Shifters; |Onsemi MC74AC373DWR2G RoHS : Compliant |
| 675 | ||
| MC74HC373ADTG | onsemi | 74Hc Cmos, Smd, 74Hc373, Tssop20; |Onsemi MC74HC373ADTG RoHS : Compliant |
| 477 | ||
| SC3732 | Fairview Microwave Inc | Rf/Coaxial Connector, Sma Coaxial; |Fairview Microwave SC3732 RoHS : Not Compliant |
| 245 | ||
DMC3730UFL3-7 | Diodes Incorporated | Mosfet, Dual, N/P-Ch, 30V, 1.1A; |Diodes Inc. DMC3730UFL3-7 RoHS : Compliant |
| 215 | ||
| DMC3730UFL3-7 | Diodes Incorporated | Mosfet, Dual, N/P-Ch, 30V, 1.1A; |Diodes Inc. DMC3730UFL3-7 RoHS : Compliant |
| 215 | ||
| MM74HC373WMX | onsemi | Latch, 74Hc373, D Type, Tri State; |Onsemi MM74HC373WMX RoHS : Compliant |
| 101 | ||
| MM74HC373WMX | onsemi | Latch, 74Hc373, D Type, Tri State; |Onsemi MM74HC373WMX RoHS : Compliant |
| 101 | ||
 Analog Devices Inc | LTC3737EGN#TRPBF | Analog Devices Inc | 2x 2-Phase, No RSENSE DC/DC Cn RoHS : Compliant |
| 12,500 | |
| LTC3731HUH#TRPBF | Analog Devices Inc | 3-Phase, 600kHz, Sync Buck Sw RoHS : Compliant |
| 5,000 | ||
| LTC3736EUF-1#PBF | Analog Devices Inc | 2x 2-Phase, No RSENSE Sync Cnt RoHS : Compliant |
| 3,474 | ||
| LTC3731IG#PBF | Analog Devices Inc | 3-Phase, 600kHz, Sync Buck Sw RoHS : Compliant |
| 2,812 | ||
| LTC3731HG#PBF | Analog Devices Inc | 3-Phase, 600kHz, Sync Buck Sw RoHS : Compliant |
| 2,568 | ||
| LTC3735EUHF#TRPBF | Analog Devices Inc | 2-Phase, Hi Eff DC/DC Cntr for RoHS : Compliant |
| 2,500 | ||
| LTC3736EUF-2#TRPBF | Analog Devices Inc | 2x 2-Phase, No RSENSE Sync Cnt RoHS : Compliant |
| 2,500 | ||
| LTC3737EUF#PBF | Analog Devices Inc | 2x 2-Phase, No RSENSE DC/DC Cn RoHS : Compliant |
| 2,275 | ||
| LTC3734EUH#PBF | Analog Devices Inc | 1x-Phase, Hi Eff DC/DC Cntr fo RoHS : Compliant |
| 659 | ||
| LTC3736EGN-2#PBF | Analog Devices Inc | 2x 2-Phase, No RSENSE Sync Cnt RoHS : Compliant |
| 14 | ||
| LTC3735EUHF#PBF | Analog Devices Inc | 2-Phase, Hi Eff DC/DC Cntr for RoHS : Compliant |
| 7 | ||
| LTC3732CUHF#TRPBF | Analog Devices Inc | 3-Phase, 5-B VID, 600kHz, Sync RoHS : Compliant |
| 0 | ||
| LTC3732CG#TRPBF | Analog Devices Inc | 3-Phase, 5-B VID, 600kHz, Sync RoHS : Compliant |
| 0 | ||
| LTC3731HG#TRPBF | Analog Devices Inc | 3-Phase, 600kHz, Sync Buck Sw RoHS : Compliant |
| 0 | ||
| LTC3736EUF-1#TRPBF | Analog Devices Inc | 2x 2-Phase, No RSENSE Sync Cnt RoHS : Compliant |
| 0 | ||
 RS | TC373 | Arrow Hart | DustTight Grip 0.70-0.97" 1"NPT NoIns |
| 0 | |
| IQC37-30 | PEPPERL+FUCHS GmbH | IDENT RFID (INDUCTIVE) |
| 0 | ||
BC373RL1G | onsemi | TRANS DARLINGTON NPN 80V 1A TO92 RoHS : Compliant |
| 0 | ||
| IMC373015C | Crouzet | SWITCH;IPD M30-15MM NONSHLD 3W PNP NO-NC 2.0M |
| 0 | ||
| CPC3730CTR | Littelfuse Inc | N-CH DEPL MOSFET 350V 30 OHMS SOT-89 TR RoHS : Compliant |
| 0 | ||
| VVEMC37-300 | Carling Technologies | HARDWARE, V-SERIES ROCKER SWITCH |
| 0 | ||
| VVFMC37-300 | Carling Technologies | HARDWARE, V-SERIES ROCKER SWITCH |
| 0 | ||
MC74HC373ANG | onsemi | CMOS LOGIC, OCTAL 3-STATE NON-INVERTING TRANSPARENT LATCH, PDIP20, PB-FREE RoHS : Compliant |
| 0 | ||
| MC74AC373DWG | onsemi | MC74AC373DWG OCTAL LATCH, TRANSPARENT D TYPE, 3 STATE, 2 TO 6 V, 20-PIN SOIC RoHS : Compliant |
| 0 | ||
| IMC373015M12 | Crouzet | SWITCH;IPD M35-15MM NONSHLD 3W PNP NO-NC M12 |
| 0 | ||
| MC74HC373ADTG | onsemi | MC74HC373ADTG OCTAL LATCH, TRANSPARENT D TYPE, 3 STATE, 2 TO 6 V, 20-PIN TSSOP RoHS : Compliant |
| 0 | ||
| MC74HC373ADWG | onsemi | MC74HC373ADWG OCTAL LATCH, TRANSPARENT D TYPE, 3 STATE, 2 TO 6 V, 20-PIN SOIC RoHS : Compliant |
| 0 | ||
| 23C373F080FD1H1 | capcom | CAPACITOR, ELECTROLYTIC,37000,80V, -40C TO +95C |
| 0 | ||
| 23C373F080EF1H1 | capcom | CAPACITOR, ELECTROLYTIC,37000,80V, -40C TO +95C |
| 0 | ||
| C373 (184TTGCD6505) | Leeson | AC MOTOR, 5, 3600, EPFC, 184TC, 3, 60, 230, 460 |
| 0 | ||
 Microchip Technology Inc | MIC37303YME-TR | Microchip Technology Inc | 3A, Low Voltage uCap LDO Regulator, SOIC, Projected EOL: 2036-10-12 RoHS : Compliant |
| 14,410 | |
| MIC37302WR | Microchip Technology Inc | 3A Low Voltage LDO Regulator, SPAK, Projected EOL: 2036-01-12 RoHS : Compliant |
| 10,766 | ||
| MIC37302WU-TR | Microchip Technology Inc | 3A Low Voltage LDO Regulator, DDPAK, Projected EOL: 2041-06-06 RoHS : Compliant |
| 7,931 | ||
| MIC37301-3.3WR | Microchip Technology Inc | 3A Low Voltage LDO Regulator, SPAK, Projected EOL: 2036-04-06 RoHS : Compliant |
| 6,816 | ||
| MIC37301-1.8YME | Microchip Technology Inc | 3A, Low Voltage uCap LDO Regulator, SOIC, Projected EOL: 2036-05-19 RoHS : Compliant |
| 5,225 | ||
| MIC37300-3.3WR | Microchip Technology Inc | 3A Low Voltage LDO Regulator, SPAK, Projected EOL: 2036-03-16 RoHS : Compliant |
| 2,696 | ||
| MIC37302WU | Microchip Technology Inc | 3A Low Voltage LDO Regulator, DDPAK, Projected EOL: 2036-03-29 RoHS : Compliant |
| 1,750 | ||
| MIC37301-2.5WR-TR | Microchip Technology Inc | 3A Low Voltage LDO Regulator, SPAK, Projected EOL: 2041-10-18 RoHS : Compliant |
| 1,500 | ||
MIC37303YML-TR | Microchip Technology Inc | 3A, Low Voltage uCap LDO Regulator, VDFN, Projected EOL: 2041-05-30 RoHS : Compliant |
| 1,294 | ||
| MIC37302WR-TR | Microchip Technology Inc | 3A Low Voltage LDO Regulator, SPAK, Projected EOL: 2036-02-22 RoHS : Compliant |
| 1,186 | ||
| MIC37301-2.5WR | Microchip Technology Inc | 3A Low Voltage LDO Regulator, SPAK, Projected EOL: 2041-10-18 RoHS : Compliant |
| 44 | ||
| MIC37300-3.3WR-TR | Microchip Technology Inc | 3A Low Voltage LDO Regulator, SPAK, Projected EOL: 2036-04-27 RoHS : Compliant |
| 20 | ||
| MIC37300-2.5WR | Microchip Technology Inc | 3A Low Voltage LDO Regulator, SPAK, Projected EOL: 2036-02-03 RoHS : Compliant |
| 0 | ||
| MIC37301-1.5WR | Microchip Technology Inc | 3A Low Voltage LDO Regulator, SPAK, Projected EOL: 2036-05-04 RoHS : Compliant |
| 0 | ||
| MIC37300-2.5WR-TR | Microchip Technology Inc | 3A Low Voltage LDO Regulator, SPAK, Projected EOL: 2036-03-12 RoHS : Compliant |
| 0 | ||
 Bisco Industries | C3732-20P | Accuride International | 88 | |||
| C3732-22P | Accuride International | 20 | ||||
| C3732-24P | Accuride International | 13 | ||||
| C3732-16P | Accuride International | 8 | ||||
| C3732-12D | Accuride International | 6 | ||||
| C3732-28P | Accuride International | 3 | ||||
 Rochester Electronics | 74LVC373ADB,118 | NXP Semiconductors | Latch 8 Bits D-Type Transparent Latch 1.5V, 1.8V, 2.5V, 3.3V 20-SOP T/R RoHS : Compliant |
| 19,000 | |
| 74HC373DB,112 | NXP Semiconductors | Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant |
| 1,320 | ||
74LVC373ADB,118 | Nexperia | Latch 8 Bits D-Type Transparent Latch 1.5V, 1.8V, 2.5V, 3.3V 20-SOP T/R RoHS : Compliant |
| 933 | ||
| 74HC373DB,112 | Nexperia | Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant |
| 7,238 | ||
| 74VHC373MTC | onsemi | Latch 8 Bits D-Type Transparent Latch 2.5V, 3.3V, 5V 20-SOP Tube RoHS : Compliant |
| 36,500 | ||
| MM74HC373SJ | onsemi | Latch 8 Bits D-Type Transparent Latch 2.5V, 3.3V, 5V 20-SOIC RoHS : Compliant |
| 23,700 | ||
| MM74HC373WM | onsemi | Latch 8 Bits D-Type Transparent Latch 2.5V, 3.3V, 5V 20-SOIC Tube RoHS : Compliant |
| 40,736 | ||
| LTC3735EUHF#PBF | Analog Devices Inc | IC VOLT REG 1 OUT 700mV - 1.71V 35mA 38-QFN Tube RoHS : Compliant |
| 4,663 | ||
CD74AC373M | Texas Instruments | Bus Driver, AC Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant |
| 7,732 | ||
| SN74LVC373DW | Texas Instruments | Latch 8 Bits D-Type Transparent Latch 3.3V 20-SOIC Rail RoHS : Not Compliant |
| 4,900 | ||
| MM74HC373SJ | Fairchild Semiconductor Corporation | Latch 8 Bits D-Type Transparent Latch 2.5V, 3.3V, 5V 20-SOIC RoHS : Compliant |
| 621 | ||
| MM74HC373WM | Fairchild Semiconductor Corporation | Latch 8 Bits D-Type Transparent Latch 2.5V, 3.3V, 5V 20-SOIC Tube RoHS : Compliant |
| 4,892 | ||
| CD74AC373M | Harris Semiconductor | Bus Driver, AC Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant |
| 696 | ||
LTC3735EUHF#PBF | Linear Technology | IC VOLT REG 1 OUT 700mV - 1.71V 35mA 38-QFN Tube RoHS : Compliant |
| 5 | ||
| MIC37302BR | Micrel Inc | IC VOLT REG Adjustable 1 REG 1.24V 3A S-PAK-5 Tube RoHS : Not Compliant |
| 23,002 | ||
 Sager | LT11BC3731C | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | ||
| VVEMC37-300 | Carling Technologies | Switch Hardware VVEMC37300 |
| 0 | ||
| LT11BC3731F | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| VVFMC37-300 | Carling Technologies | Switch Hardware VVFMC37300 |
| 0 | ||
| GA2K7MC373 | TE Connectivity | Thick Film Resistors - SMD MBD9-MICROCHIP |
| 0 | ||
| VVCZC37-300 | Carling Technologies | Switch Hardware VVCZC37300 |
| 0 | ||
 Coilcraft Direct | C373 | Coilcraft Inc | Designer's Kit, 0402PA chip inductors, RoHS, halogen-free RoHS : Compliant |
| 8 | |
 TME | MM74HC373MTC | onsemi | IC: digital; 3-state,octal,D latch; Ch: 8; CMOS; 2÷6VDC; SMD; HC RoHS : Compliant |
| 192 | |
| CPC3730CTR | IXYS Corporation | Transistor: N-MOSFET; unipolar; 350V; 0.14A; 1.4W; SOT89 RoHS : Compliant |
| 23 | ||
| MC74AC373DWR2G | onsemi | IC: digital; 3-state,octal,latch transparent; Ch: 8; CMOS; 2÷6VDC RoHS : Compliant |
| 0 | ||
| MC74VHC373DTR2G | onsemi | IC: digital; 3-state,octal,D latch; Ch: 8; CMOS; 2÷5.5VDC; SMD; VHC RoHS : Compliant |
| 0 | ||
| LTC3736EUF-2#TRPBF | Analog Devices Inc | PMIC; DC/DC converter; Uin: 2.75÷9.8VDC; Uout: 0.6÷9.8VDC; 5A; SMD RoHS : Compliant |
| 0 | ||
| LTC3731IG#TRPBF | Analog Devices Inc | PMIC; DC/DC converter; Uin: 4÷36VDC; Uout: 0.6÷1.75VDC; 60A; SSOP36 RoHS : Compliant |
| 0 | ||
| LTC3733CG#TRPBF | Analog Devices Inc | PMIC; DC/DC converter; Uin: 4÷36VDC; Uout: 0.8÷1.55VDC; 60A; SSOP36 RoHS : Compliant |
| 0 | ||
| LTC3736EGN-2#TRPBF | Analog Devices Inc | PMIC; DC/DC converter; Uin: 2.75÷9.8VDC; Uout: 0.6÷9.8VDC; 5A; SMD RoHS : Compliant |
| 0 | ||
| LTC3737EGN#TRPBF | Analog Devices Inc | PMIC; DC/DC converter; Uin: 2.75÷9.8VDC; Uout: 0.6÷9.8VDC; 5A; SMD RoHS : Compliant |
| 0 | ||
| 74VHC373MTCX | onsemi | IC: digital; 3-state,octal,D latch; Ch: 8; CMOS; 2÷5.5VDC; SMD; VHC RoHS : Compliant |
| 0 | ||
| 74VHC373MX | onsemi | IC: digital; D latch; Ch: 8; 2÷5.5VDC; SMD; SO20-W; VHC; -40÷85°C; VHC RoHS : Compliant |
| 0 | ||
| LTC3731CG#TRPBF | Analog Devices Inc | PMIC; DC/DC converter; Uin: 4÷36VDC; Uout: 0.6÷6VDC; 60A; SSOP36 RoHS : Compliant |
| 0 | ||
| LTC3731CUH#TRPBF | Analog Devices Inc | PMIC; DC/DC converter; Uin: 4÷36VDC; Uout: 0.6÷6VDC; 60A; QFN32; SMD RoHS : Compliant |
| 0 | ||
| LTC3736EUF-2#PBF | Analog Devices Inc | PMIC; DC/DC converter; Uin: 2.75÷9.8VDC; Uout: 0.6÷9.8VDC; 5A; SMD RoHS : Compliant |
| 0 | ||
| 74VHC373MTC | onsemi | IC: digital; D latch; Ch: 8; 2÷5.5VDC; SMD; TSSOP20; VHC; -40÷85°C RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | SN74AHC373PWR | Texas Instruments | SN74AHC373PWR, 八路 D 型锁存, 透明闭锁, 八, 三态输出, 2 → 5.5 V, 20针 TSSOP封装 RoHS : Compliant | 651,868 | ||
| SN74AHC373QPWRQ1 | Texas Instruments | RoHS : Compliant | 170,300 | |||
SN74AC373N | Texas Instruments | IC: digital; 3-state,octal,D-latch transparent; Channels: 8; THT RoHS : Compliant | 141,119 | |||
| RHFAC373K02V | STMicroelectronics | RoHS : Compliant | 115,987 | |||
SN74HC373DWR | Texas Instruments | SN74HC373DWR, 八路 D 型锁存, 透明闭锁, 八, 三态输出, 2 → 6 V, 20针 SOIC封装 RoHS : Compliant | 78,750 | |||
| SN74AC373PWR | Texas Instruments | SN74AC373PWR, 八路 D 型锁存, 透明闭锁, 八, 三态输出, 2 → 6 V, 20针 TSSOP封装 RoHS : Compliant | 78,064 | |||
| SN74HC373PWR | Texas Instruments | Hong Kong RoHS : Compliant | 45,258 | |||
| SN74AHC373DW | Texas Instruments | SN74AHC373DW, 八路 D 型锁存, 透明闭锁, 八, 三态输出, 2 → 5.5 V, 20针 SOIC封装 RoHS : Compliant | 36,875 | |||
| RHFAC373D03V | STMicroelectronics | 14,455 | ||||
UCC37321DGNR | Texas Instruments | IC MOSFET DRIVER SGL HS 9A 8MSOP RoHS : Compliant | 4,770 | |||
| M54HC373DG | STMicroelectronics | 3,273 | ||||
SNJ54LVC373AW | Texas Instruments | RoHS : Not Compliant | 2,994 | |||
M54HC373K1 | STMicroelectronics | RoHS : Not Compliant | 1,340 | |||
74HC373D-Q100,118 | Nexperia | IC TRANSP LATCH OCT D 20SOIC RoHS : Compliant | 1,000 | |||
SN74LVC373ADWR | Texas Instruments | RoHS : Compliant | 650 | |||
 ComSIT USA | SN74AC373PWR | Texas Instruments | Bus Driver, AC Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 18,145 | ||
74LVC373ADB | NXP Semiconductors | OCTAL D-TYPE TRANSPARENT LATCH WITH 5-VOLT TOLERANT INPUT/OUTPUT; 3-STATE Bus Driver, LVC/LCX/Z Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 9,000 | |||
| 74HC373WM | Fairchild Semiconductor Corporation | Latch 8 Bits D-Type Transparent Latch 2.5V, 3.3V, 5V 20-SOIC Tube RoHS : Not Compliant | 4,309 | |||
| 74HC373D | Philips Semiconductors | Latch 8 Bits D-Type Transparent Latch 2.5V, 3.3V, 5V 20-SOIC T/R RoHS : Not Compliant | 3,023 | |||
| 74LVC373APW | NXP Semiconductors | D Latch, 1-Func, 8-Bit, CMOS, PDSO20 RoHS : Compliant | 2,275 | |||
| 74HC373PWR | Texas Instruments | OCTAL TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUT Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 1,915 | |||
| 74HC373N | Philips E C G Inc | OCTAL D-TYPE TRANSPARENT LATCH; 3-STATE Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDIP20 RoHS : Not Compliant | 1,820 | |||
| 74HC373D653 | NXP Semiconductors | Octal D-type transparent latch, 3-state, 74HC series, NXP RoHS : Compliant | 1,558 | |||
| 74HC373DB | NXP Semiconductors | OCTAL D-TYPE TRANSPARENT LATCH; 3-STATE Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 744 | |||
| 74HC373ADW | onsemi | HIGH-PERFORMANCE SILICON-GATE CMOS OCTAL 3-STATE NON-INVERTING TRANSPARENT LATCH Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Not Compliant | 266 | |||
| MM74HC373WMX | Fairchild Semiconductor Corporation | Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 240 | |||
| UCC37321P | Unitrode Corporation | SINGLE 9-A HIGH SPEED LOW-SIDE MOSFET DRIVER WITH ENABLE Buffer/Inverter Based MOSFET Driver, 9A, BICMOS, PDIP8 RoHS : Not Compliant | 200 | |||
| 74LVC373ADBR | Texas Instruments | OCTAL TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUT Bus Driver, LVC/LCX/Z Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 200 | |||
| UCC37323D | Unitrode Corporation | DUAL 4-AMP PEAK HIGH SPEED LOW-SIDE POWER MOSFET DRIVER Buffer/Inverter Based MOSFET Driver, 4A, BICMOS, PDSO8 RoHS : Not Compliant | 50 | |||
| LTC3732CGPBF | Linear Technology | DC/DC Cntrlr Single-OUT Step Down 750kHz 36-Pin SSOP Tube RoHS : Compliant | 30 | |||
 Interstate Connecting Components | GA2K7MC373 | TE Connectivity | MBD9-MICROCHIP | 0 | ||
 NexGen Digital | SN74HC373DWR | Texas Instruments | RoHS : Compliant | 2,297 | ||
| SN74LVC373APWR | Texas Instruments | RoHS : Compliant | 2,000 | |||
| 74AC373PC | Fairchild Semiconductor Corporation | RoHS : Compliant | 1,052 | |||
| 74HC373 | Motorola Semiconductor Products | 315 | ||||
| 74HC373D | Philips E C G Inc | 104 | ||||
 Richardson RFPD | LTC3735EUHF#PBF | Analog Devices Inc | DC/DC Cntrlr Dual-OUT Step Down 550kHz 38-Pin QFN RoHS : Compliant |
| 0 | |
| MIC37302WR-TR | Microchip Technology Inc | LDO Regulator Pos 1.24V to 5.5V 3A 6-Pin(5+Tab) SP RoHS : Compliant | 0 | |||
| MIC37302WR | Microchip Technology Inc | LDO Regulator Pos 1.24V to 5.5V 3A 6-Pin(5+Tab) SP RoHS : Compliant | 0 | |||
| LTC3731IG#PBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Step Down 440kHz 36-Pin SS RoHS : Compliant |
| 0 | ||
| LTC3737EUF#PBF | Analog Devices Inc | DC/DC Cntrlr Dual-OUT Step Down 850kHz 24-Pin QFN RoHS : Compliant |
| 0 | ||
| LTC3732CUHF#TRPBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Step Down 750kHz 38-Pin Q RoHS : Compliant |
| 0 | ||
| LTC3731HG#PBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Step Down 750kHz 36-Pin S RoHS : Compliant |
| 0 | ||
| LTC3731HUH#TRPBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Step Down 750kHz 32-Pin Q RoHS : Compliant |
| 0 | ||
| DCMC373T160DE2B | Knowles CDE | Cap Aluminum Lytic 37000uF 160V -10% to 50% (76.2 RoHS : Compliant |
| 0 | ||
| LTC3736EUF-1#PBF | Analog Devices Inc | DC/DC Cntrlr Dual-OUT Step Down 580kHz 24-Pin QFN RoHS : Compliant |
| 0 | ||
| LTC3735EUHF#TRPBF | Analog Devices Inc | DC/DC Cntrlr Dual-OUT Step Down 550kHz 38-Pin QFN RoHS : Compliant |
| 0 | ||
| LTC3736EGN-2#PBF | Analog Devices Inc | DC/DC Cntrlr Dual-OUT Step Down 850kHz 24-Pin SSOP RoHS : Compliant |
| 0 | ||
| LTC3732CG#TRPBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Step Down 750kHz 36-Pin S RoHS : Compliant |
| 0 | ||
| LTC3734EUH#PBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Step Down 550kHz 32-Pin Q RoHS : Compliant |
| 0 | ||
| LTC3731HG#TRPBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Step Down 750kHz 36-Pin S RoHS : Compliant |
| 0 | ||
 Chip 1 Exchange | 74AC373SCX | Fairchild Semiconductor Corporation | INSTOCK RoHS : Compliant | 5,519 | ||
| MC74AC373DWR2 | INSTOCK | 3,782 | ||||
| 74LVC373 | Texas Instruments | INSTOCK | 2,000 | |||
| 74HC373D | Philips Semiconductors | INSTOCK RoHS : Compliant | 735 | |||
| 74HC373D | Philips Semiconductors | INSTOCK RoHS : Compliant | 735 | |||
| MM74HC373N | INSTOCK | 378 | ||||
| MM74C373N | INSTOCK | 301 | ||||
| 74HC373 | ST-Ericsson | INSTOCK | 280 | |||
| MC74HC373ADWR2 | onsemi | INSTOCK RoHS : Not Compliant | 278 | |||
| 74HC373D | NXP Semiconductors | INSTOCK RoHS : Compliant | 264 | |||
| HC373 | INSTOCK | 200 | ||||
| 74AC373SCX | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 198 | |||
| MM74HC373N | Fairchild Semiconductor Corporation | INSTOCK RoHS : Compliant | 191 | |||
| 74LVC373APW | NXP Semiconductors | INSTOCK RoHS : Compliant | 100 | |||
| 74HC373 | INSTOCK | 40 | ||||
 Avnet Abacus | C37362-000 | TE Connectivity | (Alt: C37362-000) RoHS : Not Compliant | 0 | ||
| DKTFM13WC3737 | Kyocera AVX Components | (Alt: DKTFM13WC3737) RoHS : Not Compliant | 0 | |||
| DKTFM14WC3737 | Kyocera AVX Components | (Alt: DKTFM14WC3737) RoHS : Not Compliant | 0 | |||
| DKTFM23MC3737 | Kyocera AVX Components | (Alt: DKTFM23MC3737) RoHS : Not Compliant | 0 | |||
| DKTFM12MC3737 | Kyocera AVX Components | (Alt: DKTFM12MC3737) RoHS : Not Compliant | 0 | |||
| DKTFM24MC3737 | Kyocera AVX Components | (Alt: DKTFM24MC3737) RoHS : Not Compliant | 0 | |||
| DKTFM23WC3737 | Kyocera AVX Components | (Alt: DKTFM23WC3737) RoHS : Not Compliant | 0 | |||
| DKTFM22MC3737 | Kyocera AVX Components | (Alt: DKTFM22MC3737) RoHS : Not Compliant | 0 | |||
| DKTFM24WC3737 | Kyocera AVX Components | (Alt: DKTFM24WC3737) RoHS : Not Compliant | 0 | |||
| DKTFM21WC3737 | Kyocera AVX Components | (Alt: DKTFM21WC3737) RoHS : Not Compliant | 0 | |||
| DKTFM11MC3737 | Kyocera AVX Components | (Alt: DKTFM11MC3737) RoHS : Not Compliant | 0 | |||
| DKTFM11WC3737 | Kyocera AVX Components | (Alt: DKTFM11WC3737) RoHS : Not Compliant | 0 | |||
| DKTFM14MC3737 | Kyocera AVX Components | (Alt: DKTFM14MC3737) RoHS : Not Compliant | 0 | |||
| DKTFM22WC3737 | Kyocera AVX Components | (Alt: DKTFM22WC3737) RoHS : Not Compliant | 0 | |||
| DKTFM13MC3737 | Kyocera AVX Components | (Alt: DKTFM13MC3737) RoHS : Not Compliant | 0 | |||
Avnet Asia | 74HC373PW-Q100,118 | Nexperia | Latch, 74HC373, D Type Transparent, Tri State Non Inverted, 26 ns, 7.8 mA, 20 Pins, TSSOP (Alt: 74HC373PW-Q100,118) RoHS : Compliant | 0 | ||
74LVC373ABQ,115 | Nexperia | Latch, 74LVC373, D Type Transparent, Tri State, 8.5 ns, 24 mA, 20 Pins, DHVQFN (Alt: 74LVC373ABQ,115) RoHS : Compliant | 0 | |||
| MM74HC373MTC | onsemi | (Alt: MM74HC373MTC) RoHS : Compliant | 0 | |||
| 74HC373PW,118 | Nexperia | Latch, HC Family, 74HC373, D Type Transparent, Tri State, 35 mA, TSSOP (Alt: 74HC373PW,118) RoHS : Compliant |
| 0 | ||
| 74LVC373AQ20-13 | Diodes Incorporated | (Alt: 74LVC373AQ20-13) RoHS : Compliant | 0 | |||
| TC74HC373AF(EL,F) | Toshiba America Electronic Components | (Alt: TC74HC373AF(EL,F)) RoHS : Compliant | 0 | |||
| MC74VHC373DTR2G | onsemi | (Alt: MC74VHC373DTR2G) RoHS : Compliant | 0 | |||
| JDS-LT15CC3731 | Qnity Laird | (Alt: JDS-LT15CC3731) RoHS : Compliant | 0 | |||
| 74HC373D,653 | Nexperia | (Alt: 74HC373D,653) RoHS : Compliant | 0 | |||
| 2SC3739-T1B-A/S4 | Renesas Electronics Corporation | (Alt: 2SC3739-T1B-A/S4) RoHS : Compliant | 0 | |||
| 74LVC373AD,118 | Nexperia | (Alt: 74LVC373AD,118) RoHS : Compliant | 0 | |||
| 74LVC373APW,118 | Nexperia | Latch, LVC Family, 74LVC373, D Type Transparent, Tri State Non Inverted, 50 mA, TSSOP (Alt: 74LVC373APW,118) RoHS : Compliant |
| 0 | ||
 Avnet Silica | MC74HC373ADWR2G | onsemi | Latch 74HC373 D Type Transparent Tri State Non Inverted 26 ns WSOIC (Alt: MC74HC373ADWR2G) RoHS : Compliant | 114,000 | ||
| 74LVC373APW,118 | Nexperia | Latch LVC Family 74LVC373 D Type Transparent Tri State Non Inverted 50 mA TSSOP (Alt: 74LVC373APW,118) RoHS : Compliant | 40,000 | |||
| 74LVC373AD,118 | Nexperia | Latch 74LVC373 D Type Transparent Tri State 85 ns 24 mA 20 Pins SOIC (Alt: 74LVC373AD,118) RoHS : Compliant | 16,000 | |||
| DMC3730UVT-7 | Diodes Incorporated | (Alt: DMC3730UVT-7) RoHS : Compliant | 3,000 | |||
| MM74HC373WM | onsemi | 3STATE Octal DType Latch ONSSPCLGC (Alt: MM74HC373WM) RoHS : Compliant | 2,926 | |||
| MC74HC373ADWG | onsemi | Latch 74HC373 Transparent Tri State Non Inverted 25 ns SOIC (Alt: MC74HC373ADWG) RoHS : Compliant | 2,774 | |||
| 74HC373PW,118 | Nexperia | Latch HC Family 74HC373 D Type Transparent Tri State 35 mA TSSOP (Alt: 74HC373PW,118) RoHS : Compliant | 2,500 | |||
| MC74HC373ADTR2G | onsemi | Octal 3State NonInverting Transparent Latch ONSSPCLGC (Alt: MC74HC373ADTR2G) RoHS : Compliant | 2,500 | |||
| MM74HC373WMX | onsemi | 3STATE Octal DType Latch ONSSPCLGC (Alt: MM74HC373WMX) RoHS : Compliant | 2,000 | |||
| 74HC373D,653 | Nexperia | Latch HC Family 74HC373 D Type Transparent Tri State 12 ns SOIC (Alt: 74HC373D,653) RoHS : Compliant | 2,000 | |||
| MC74HC373ADTG | onsemi | Octal 3State NonInverting Transparent Latch ONSSPCLGC (Alt: MC74HC373ADTG) RoHS : Compliant | 1,875 | |||
| MM74HC373MTC | onsemi | 3STATE Octal DType Latch ONSSPCLGC (Alt: MM74HC373MTC) RoHS : Compliant | 1,575 | |||
| MIC37302WR | Microchip Technology Inc | LDO Regulator Pos 124V to 55V 3A 5Pin SPAK (Alt: MIC37302WR) RoHS : Compliant | 0 | |||
| MIC37302WR-TR | Microchip Technology Inc | LDO Regulator Pos 124V to 55V 3A 5Pin SPAK TR (Alt: MIC37302WR-TR) RoHS : Compliant | 0 | |||
| MIC37303YME-TR | Microchip Technology Inc | LDO Regulator Pos 124V to 55V 3A 8Pin SOIC EP TR (Alt: MIC37303YME-TR) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | HAC3737CXHA-2-R-4-00 | TDK Micronas GmbH | TO92-UF, Robust Programmable 2D Position Sensors with Integrated Capacitors - Digital Output |
| 0 | |
 Component Electronics, Inc | MC74HC373AN | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,068 | |
| BC373 | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 930 | ||
| 74LVC373APW-T | Philips Semiconductors | IN STOCK SHIP TODAY RoHS : Compliant |
| 660 | ||
| MM74HC373N | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 142 | ||
| 74HC373D | Philips Semiconductors | IN STOCK SHIP TODAY RoHS : Compliant |
| 119 | ||
| MC74HC373AN | onsemi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 104 | ||
| MM74HC373WM | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 73 | ||
| SN74HC373DW | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 39 | ||
| 74HC373D | Philips Semiconductors | IN STOCK SHIP TODAY RoHS : Compliant | 30 | |||
| 74HC373N | Philips Semiconductors | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| MM74C373N | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 20 | ||
| 74AC373PC | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 15 | ||
| 74HC373D | NXP Semiconductors | IN STOCK SHIP TODAY RoHS : Compliant |
| 11 | ||
| MIC37302WR-TR | Micrel Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| TC74HC373P | Toshiba America Electronic Components | IN STOCK SHIP TODAY RoHS : Not Compliant | 1 | |||
 DB Roberts | YC3-7318 | PennEngineering (PEM) | CLS-440-0 FOR .171 MTG HOLE SPECIAL |
| 1,618 | |
| C3732-20P | Accuride International | Lowest profile side mount slide |
| 44 | ||
| C3732-18P | Accuride International | Lowest profile side mount slide |
| 30 | ||
| C3732-12P | Accuride International | Lowest profile side mount slide |
| 7 | ||
| C3732-16D | Accuride International | Lowest profile side mount slide |
| 1 | ||
 EBV Elektronik | MC74HC373ADWR2G | onsemi | Latch 74HC373 D Type Transparent Tri State Non Inverted 26 ns WSOIC (Alt: MC74HC373ADWR2G) RoHS : Compliant | 177,000 | ||
| MC74AC373DWG | onsemi | Octal Transparent Latch with 3State Outputs ONSSPCLGC (Alt: MC74AC373DWG) RoHS : Compliant | 2,622 | |||
| MIC37302WR | Microchip Technology Inc | LDO Regulator Pos 124V to 55V 3A 5Pin SPAK (Alt: MIC37302WR) RoHS : Compliant | 0 | |||
| MM74HC373WM | onsemi | 3STATE Octal DType Latch ONSSPCLGC (Alt: MM74HC373WM) RoHS : Compliant | 0 | |||
| MM74HC373MTC | onsemi | 3STATE Octal DType Latch ONSSPCLGC (Alt: MM74HC373MTC) RoHS : Compliant | 0 | |||
| MIC37302WR-TR | Microchip Technology Inc | LDO Regulator Pos 124V to 55V 3A 5Pin SPAK TR (Alt: MIC37302WR-TR) RoHS : Compliant | 0 | |||
| MC74HC373ADTG | onsemi | Octal 3State NonInverting Transparent Latch ONSSPCLGC (Alt: MC74HC373ADTG) RoHS : Compliant | 0 | |||
| 74VHC373FT(BJ) | Toshiba America Electronic Components | (Alt: 74VHC373FT(BJ)) RoHS : Compliant | 0 | |||
| MIC37303YME-TR | Microchip Technology Inc | LDO Regulator Pos 124V to 55V 3A 8Pin SOIC EP TR (Alt: MIC37303YME-TR) RoHS : Compliant | 0 | |||
| MIC37301-1.8WR | Microchip Technology Inc | 3A LOW VOLTAGE LDO REGULATOR (Alt: MIC37301-1.8WR) RoHS : Compliant | 0 | |||
| MIC37301-3.3WR | Microchip Technology Inc | 3A LOW VOLTAGE LDO REGULATOR (Alt: MIC37301-3.3WR) RoHS : Compliant | 0 | |||
| MC74AC373DWR2G | onsemi | Octal Transparent Latch with 3State Outputs ONSSPCLGC (Alt: MC74AC373DWR2G) RoHS : Compliant | 0 | |||
| MC74VHC373DWR2G | onsemi | Octal DType Latch with 3State Output ONSSPCLGC (Alt: MC74VHC373DWR2G) RoHS : Compliant | 0 | |||
| MC74HC373ADTR2G | onsemi | Octal 3State NonInverting Transparent Latch ONSSPCLGC (Alt: MC74HC373ADTR2G) RoHS : Compliant | 0 | |||
| TC74VHC373F(EL,K,F | Toshiba America Electronic Components | Latch 74VHC373 D Type Tri State 149 ns 8 mA 20 Pins SOP (Alt: TC74VHC373F(EL,K,F) RoHS : Compliant | 0 | |||
 Flip Electronics | 74VHC373MX | onsemi | Stock, Ship Today RoHS : Compliant |
| 69,463 | |
| MM74HC373SJX | onsemi | Stock, Ship Today RoHS : Compliant |
| 43,647 | ||
| MM74HC373SJ | onsemi | Stock, Ship Today RoHS : Compliant |
| 38,479 | ||
| 74VHC373M | onsemi | Stock, Ship Today RoHS : Compliant |
| 35,640 | ||
| MM74HC373WM | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,080 | ||
| MC74AC373DWR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,000 | ||
 Maritex | WRC37341 | YAGEO Corporation | Chip Resistor; SMD; 0603; 68R; 1%; 1/10W |
| 8,900 | |
| SN74HC373N | Texas Instruments | Latches; SN74HC373N; TEXAS INSTRUMENTS; 8; 20; 6 V; 285 ns RoHS : Compliant |
| 2,174 | ||
| SN74HC373DWR | Texas Instruments | Latches; SN74HC373DWR; TEXAS INSTRUMENTS; 8; 20; 6 V; 220 ns RoHS : Compliant |
| 1,428 | ||
| U74HC373L-D20-T | Unisonic Technologies Co Ltd | Latches; U74HC373L-D20-T; UTC RoHS : Compliant |
| 100 | ||
| SN74LVC373APW | Texas Instruments | Latches; SN74LVC373APW; TEXAS INSTRUMENTS; 8; 3.6 V; 7.6 ns; 8 RoHS : Compliant |
| 62 | ||
| U74HC373G-S20-T | Unisonic Technologies Co Ltd | Latches; U74HC373G-S20-T; UTC |
| 45 | ||
 Pasternack Enterprises US | PE3C3731-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMB Plug to BNC Male Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly SMB plug to BNC male cable 48 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB plug to BNC male cable 48 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and BNC cable connection on the other. Our SMB to BNC cable assembly has plug gender on end 1 and male on end 2. PE3C3731-48 can also be known as a SMB male to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMB male to BNC plug cable assembly PE3C3731-48 is built with RG316 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C3731-48 RF cable are available on our downloadable PDF datasheet.PE3C3731-48 can also be used in the other direction and will be BNC male to SMB plug cable assembly if the opposite connectivity is required. SMB male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB RF cable assembly as per your requirements. |
| 0 | |
| PE3C3731-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMB Plug to BNC Male Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly SMB plug to BNC male cable 36 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB plug to BNC male cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and BNC cable connection on the other. Our SMB to BNC cable assembly has plug gender on end 1 and male on end 2. PE3C3731-36 can also be known as a SMB male to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMB male to BNC plug cable assembly PE3C3731-36 is built with RG316 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C3731-36 RF cable are available on our downloadable PDF datasheet.PE3C3731-36 can also be used in the other direction and will be BNC male to SMB plug cable assembly if the opposite connectivity is required. SMB male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3737 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50. SMA Male to N Male Cable Using RG142 Coax. PE3C3737 is a SMA male to N type male cable using RG142 coax. This Pasternack SMA male to type N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm type N for connector 2. Our male SMA to male type N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3737 SMA male to N type male cable assembly is constructed with RG142 coax and the maximum VSWR is 1.4:1. | 0 | |||
| PE3C3732-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Male to Straight Cut Lead Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly BNC male to straight cut lead cable 36 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to straight cut lead cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to straight cut lead cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and straight cut lead cable connection on the other. Our BNC to straight cut lead cable assembly has male gender on end 1 and sexless on end 2. PE3C3732-36 can also be known as a BNC plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. BNC plug to straight cut lead sexless cable assembly PE3C3732-36 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has crimp/solder attachment method and body with plating.Additional dimensions, specifications and CAD drawings for this PE3C3732-36 RF cable are available on our downloadable PDF datasheet.PE3C3732-36 can also be used in the other direction and will be straight cut lead sexless to BNC male cable assembly if the opposite connectivity is required. BNC plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to straight cut lead cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3735 | Pasternack Enterprises | Key Specifications, Connector Series 1: SC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: Straight Cut Lead, Connector Gender 2: Sexless, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 0, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50. SC Male Right Angle to Straight Cut Lead Cable Using RG393 Coax. PE3C3735 is a SC male right angle to Straight Cut Lead sexless cable using RG393 coax. This Pasternack SC male right angle to Straight Cut Lead sexless cable assembly uses a 50 Ohm SC for connector 1 and a Straight Cut Lead for connector 2. SC right angle to Straight Cut Lead coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SC right angle to sexless Straight Cut Lead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3735 SC male right angle to Straight Cut Lead sexless cable assembly is constructed with RG393 coax. | 0 | |||
| PE3C3738-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to N Male Cable 36 Inch Length Using RG223 Coax., Radio frequency assembly SMA male to N male cable 36 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N male cable 36 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our SMA to N type cable assembly has male gender on end 1 and male on end 2. PE3C3738-36 can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to N type plug cable assembly PE3C3738-36 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has crimp/solder attachment method and brass body with tri-metal plating.Additional dimensions, specifications and CAD drawings for this PE3C3738-36 RF cable are available on our downloadable PDF datasheet.PE3C3738-36 can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3731 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMB Plug to BNC Male Cable Using RG316 Coax., Radio frequency assembly SMB plug to BNC male cable using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB plug to BNC male cable using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and BNC cable connection on the other. Our SMB to BNC cable assembly has plug gender on end 1 and male on end 2. PE3C3731 can also be known as a SMB male to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMB male to BNC plug cable assembly PE3C3731 is built with RG316 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C3731 RF cable are available on our downloadable PDF datasheet.PE3C3731 can also be used in the other direction and will be BNC male to SMB plug cable assembly if the opposite connectivity is required. SMB male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB RF cable assembly as per your requirements. | 0 | |||
| PE3C3732-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male to Straight Cut Lead Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly BNC male to straight cut lead cable 12 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to straight cut lead cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to straight cut lead cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and straight cut lead cable connection on the other. Our BNC to straight cut lead cable assembly has male gender on end 1 and sexless on end 2. PE3C3732-12 can also be known as a BNC plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. BNC plug to straight cut lead sexless cable assembly PE3C3732-12 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has crimp/solder attachment method and body with plating.Additional dimensions, specifications and CAD drawings for this PE3C3732-12 RF cable are available on our downloadable PDF datasheet.PE3C3732-12 can also be used in the other direction and will be straight cut lead sexless to BNC male cable assembly if the opposite connectivity is required. BNC plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to straight cut lead cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3734/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. BNC Male to BNC Female Cable Using RG174 Coax with HeatShrink. PE3C3734/HS is a BNC male to BNC female cable using RG174 coax. This Pasternack BNC male to BNC female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3734/HS BNC male to BNC female cable assembly is constructed with RG174 coax. | 0 | |||
| PE3C3738-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to N Male Cable 24 Inch Length Using RG223 Coax., Radio frequency assembly SMA male to N male cable 24 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N male cable 24 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our SMA to type N cable assembly has male gender on end 1 and male on end 2. PE3C3738-24 can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to type N plug cable assembly PE3C3738-24 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has crimp/solder attachment method and brass body with tri-metal plating.Additional dimensions, specifications and CAD drawings for this PE3C3738-24 RF cable are available on our downloadable PDF datasheet.PE3C3738-24 can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3732-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to Straight Cut Lead Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly BNC male to straight cut lead cable 48 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to straight cut lead cable 48 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to straight cut lead cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and straight cut lead cable connection on the other. Our BNC to straight cut lead cable assembly has male gender on end 1 and sexless on end 2. PE3C3732-48 can also be known as a BNC plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. BNC plug to straight cut lead sexless cable assembly PE3C3732-48 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has crimp/solder attachment method and body with plating.Additional dimensions, specifications and CAD drawings for this PE3C3732-48 RF cable are available on our downloadable PDF datasheet.PE3C3732-48 can also be used in the other direction and will be straight cut lead sexless to BNC male cable assembly if the opposite connectivity is required. BNC plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to straight cut lead cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3738-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to N Male Cable 60 Inch Length Using RG223 Coax., Radio frequency assembly SMA male to N male cable 60 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N male cable 60 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our SMA to N type cable assembly has male gender on end 1 and male on end 2. PE3C3738-60 can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to N type plug cable assembly PE3C3738-60 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has crimp/solder attachment method and brass body with tri-metal plating.Additional dimensions, specifications and CAD drawings for this PE3C3738-60 RF cable are available on our downloadable PDF datasheet.PE3C3738-60 can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3730/HS | Pasternack Enterprises | 0 | ||||
| PE3C3732-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. BNC Male to Straight Cut Lead Cable 72 Inch Length Using RG316 Coax., Radio frequency assembly BNC male to straight cut lead cable 72 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to straight cut lead cable 72 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to straight cut lead cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and straight cut lead cable connection on the other. Our BNC to straight cut lead cable assembly has male gender on end 1 and sexless on end 2. PE3C3732-72 can also be known as a BNC plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. BNC plug to straight cut lead sexless cable assembly PE3C3732-72 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has crimp/solder attachment method and body with plating.Additional dimensions, specifications and CAD drawings for this PE3C3732-72 RF cable are available on our downloadable PDF datasheet.PE3C3732-72 can also be used in the other direction and will be straight cut lead sexless to BNC male cable assembly if the opposite connectivity is required. BNC plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to straight cut lead cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3730 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50. SMA Male Right Angle to BNC Male Cable Using RG316 Coax. PE3C3730 is a SMA male right angle to BNC male cable using RG316 coax. This Pasternack SMA male right angle to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. SMA right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3730 SMA male right angle to BNC male cable assembly is constructed with RG316 coax and the maximum VSWR is 1.4:1. | 0 | |||
 Teledyne HiRel | MM54C373J/883 | Teledyne HiRel | LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS | 0 | ||
 Vyrian | LTC3735EUHF#PBF | Analog Devices Inc | Dual Switching Controller, Current-mode, 5A, 610kHz Switching Freq-Max, CMOS, PQCC38 RoHS : Compliant | 10,744 | ||
| LTC3737EGN-TRPBF | Analog Devices Inc | 10,384 | ||||
| RHFAC373K02V | STMicroelectronics | RoHS : Compliant | 9,820 | |||
| LTC3735EUHF-TRPBF | Analog Devices Inc | 9,684 | ||||
| CD74HC373M96E4 | Texas Instruments | Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 9,248 | |||
| 74LVC373AMTR | STMicroelectronics | Bus Driver, LVC/LCX/Z Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 9,226 | |||
| 74AC373MTR | STMicroelectronics | RoHS : Compliant | 9,132 | |||
| 74AHC373PW | Nexperia | Bus Driver, AHC Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 9,005 | |||
| SN74AVC373DWR | Texas Instruments | Bus Driver, AVC Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 | 8,548 | |||
| LTC3731IG#PBF | Analog Devices Inc | Switching Controller, Current-mode, 5A, 750kHz Switching Freq-Max, PDSO36 RoHS : Compliant | 8,088 | |||
| RHFAC373K1 | STMicroelectronics | RoHS : Compliant | 7,288 | |||
| MM74HC373J/A+ | Texas Instruments | FF/Latch | 6,801 | |||
| MC74AC373DW | onsemi | Bus Driver, AC Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Not Compliant | 6,381 | |||
| LTC3736EGN-2-PBF | Analog Devices Inc | 6,245 | ||||
| LTC3737EGN#TR | Analog Devices Inc | Dual Switching Controller, Current-mode, 1A, 825kHz Switching Freq-Max, PDSO24 RoHS : Not Compliant | 5,995 | |||
 Win Source Electronics | DMC3730UFL3-7 | Diodes Incorporated | MOSFET N/P-CHA 30V 1.1A DFN1310 / Mosfet Array N and P-Channel Complementary 30V 1.1A, 700mA 390mW Surface Mount X2-DFN1310-6 (Type B) RoHS : Compliant |
| 79,000 | |
| 74HC373D | Nexperia | Latch Transparent 3-ST 8-CH D-Type 20-Pin SO / IC LATCH TRANSP OCT D 3ST 20SOIC RoHS : Compliant |
| 27,500 | ||
| SN74HC373DW | Texas Instruments | IC OCT TRANSP D LATCH 20-SOIC RoHS : Compliant |
| 25,555 | ||
| MM74HC373MTC | Fairchild Semiconductor Corporation | IC LATCH OCTAL D 3ST 20TSSOP RoHS : Compliant |
| 17,500 | ||
| MIC37302WR | Microchip Technology Inc | IC REG LDO ADJ 3A SPAK-5 RoHS : Compliant |
| 7,500 | ||
| MIC37302WR-TR | Microchip Technology Inc | IC REG LDO ADJ 3A SPAK-5 RoHS : Compliant |
| 6,770 | ||
| MIC37303YME-TR | Microchip Technology Inc | IC REG LDO ADJ 3A 8SOIC RoHS : Compliant |
| 5,325 | ||
| SN74LVC373ADW | Texas Instruments | OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS | IC OCTAL TRANSP LATCH 20-SOIC RoHS : Compliant |
| 4,970 | ||
| SN74HC373DWR | Texas Instruments | IC OCT TRANSP D LATCH 20-SOIC RoHS : Compliant |
| 3,820 | ||
| SN74LVC373APWRG4 | Texas Instruments | IC OCT D TRNSP LATCH 3ST 20TSSOP RoHS : Compliant |
| 3,500 | ||
| SN74HC373DWRG4 | Texas Instruments | OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS RoHS : Compliant |
| 2,820 | ||
| 74LVC373APW | Nexperia | BUS DRIVER, LVC/LCX/Z SERIES, 1- / Channel IC RoHS : Compliant |
| 1,000 | ||
SN54HC373J | Texas Instruments | OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS RoHS : Not Compliant |
| 758 | ||
| MM74HC373N | Fairchild Semiconductor Corporation | IC LATCH OCTAL 3 STATE 20-DIP RoHS : Compliant |
| 421 | ||
| MIC37303YME | Micrel Inc | 3.0A, Low-Voltage μCap LDO Regulator RoHS : Compliant |
| 9 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
German ▼ 
English
Chinese
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand