C37L-AF5-R Price, Verteiler, Stock

BlueKote Thru-Feed Form 7 - 1 Conduit Body - Body Gray Iron with Zinc Plating and Baked On Epoxy Powder Coat with BlueKote Internal Coating.
RoHS : Compliant

500 : $35.14
250 : $36.07
100 : $36.55
50 : $37.55
25 : $39.72
10 : $40.91
5 : $42.17

2C3725

Microchip Technology Inc

Small-Signal BJT
RoHS : Compliant

154 : $5.6
116 : $5.72
77 : $6.15
39 : $8.09

BKAC3-770322F0

ITT Interconnect Solutions

Rack And Panel Connector - ARINC 600 - Plug - 770 Position - Shell Size 3 - Crimp Termination - Without Contacts.
RoHS : Compliant

10 : $1,998.18
8 : $2,038.96
5 : $3,195.08
3 : $5,213.02

BKAC3-78430001

ITT Interconnect Solutions

Rack And Panel Connector - ARINC 600 - Plug - 784 Position - Shell Size 3 - Crimp Termination.
RoHS : Compliant

10 : $3,866.57
8 : $3,945.47
5 : $6,182.6
3 : $10,087.4

MIC37100-1.65WS

Microchip Technology Inc

LDO Regulator Pos 1.65V 1A 4-Pin(3+Tab) SOT-223 Tube
RoHS : Compliant

10,062 : $0.744
7,566 : $0.749
5,070 : $0.751
2,574 : $0.753
1,014 : $0.792
546 : $0.824
312 : $0.836
78 : $0.91

MIC37101-1.65YM-TR

Microchip Technology Inc

LV 1.0A uCap fixed Vout LDO
RoHS : Compliant

2,500 : $0.3018
1,875 : $0.308
1,250 : $0.33
625 : $0.44

MIC37301-1.8WR-TR

Microchip Technology Inc

3A Low Voltage LDO Regulator
RoHS : Compliant

750 : $1.3
563 : $1.33
375 : $1.43
188 : $1.89

XM3C-3722-501

Aratas Corporation

D-SUB Connector
RoHS : Compliant

1,000 : $5.62
520 : $7.94
280 : $8.16
120 : $8.63
80 : $8.89
40 : $9.31
5 : $10.27

VVCZC37-200

Carling Technologies

V-SERIES ROCKER SWITCH
RoHS : Compliant

10,000 : $1.48
7,500 : $1.49
5,000 : $1.5
2,500 : $1.54
1,000 : $1.58
500 : $1.67
300 : $1.72
100 : $2.21

CPC3701CTR

Littelfuse Inc

CPC Series 60 V 600 mA 1 O N-Channel Depletion Mode DMOS FET - SOT-89
RoHS : Compliant

50,000 : $0.602
25,000 : $0.618
15,000 : $0.626
10,000 : $0.64
8,000 : $0.642
5,000 : $0.643
3,000 : $0.671
1,000 : $0.734

HPBA020C375R100E

TE Connectivity

HPBA 2HP 375R 100%/460V 100% MOQ Reduction
RoHS : Compliant

5 : $605.84
4 : $618.21
3 : $780.89
2 : $1,106.27

MC74VHC373DTR2G

onsemi

Octal D-Type Latch with 3-State Output
RoHS : Compliant

2,500 : $0.44
1,875 : $0.449
1,250 : $0.481
625 : $0.6414

2C3790

Microchip Technology Inc

Power BJT
RoHS : Compliant

100 : $52.36
75 : $53.43
50 : $75.92
25 : $143.41

Pasternack Enterprises US

PE3C3741-12

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 12 inches. BNC Male to BNC Female Cable 12 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly BNC male to BNC female cable 12 inch length using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC female cable 12 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE3C3741-12, can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE3C3741-12 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3741-12 can also be used in the other direction and will be BNC female to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC female cable 12 inch length using 75 Ohm RG179 coax.

1 : $58.89
25 : $55.95
50 : $53.0
100 : $50.65

577

PE3C3754-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to UHF Male Low Loss Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly N male to UHF male low loss cable 12 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to UHF male low loss cable 12 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and UHF cable connection on the other. Our low loss type N to UHF cable assemblies have a male gender on end 1 and male on end 2. PE3C3754-12 can also be known as a low loss N type plug to UHF plug cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF plug cable assembly PE3C3754-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency N type male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3754-12 can also be used in the other direction and will be UHF male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to UHF male low loss cable 12 inch length using LMR-195 coax.

1 : $60.99
25 : $57.94
50 : $54.89
100 : $52.45

488

TC-375-716M-LP

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: 7/16 DIN, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: SPP-375-LLPL, Interface Type 2: SPO-375, Interface Type 3: SPF-375. 7/16 DIN Male Low PIM Connector Solder Attachment for SPP-375-LLPL, SPO-375, SPF-375. TC-375-716M-LP 7/16 DIN male coaxial connector has an interface type of SPP-375-LLPL, SPO-375, SPF-375 and a 50 Ohm impedance. Pasternack 7/16 DIN male connector uses shield/contact solder/solder as an attachment method. Our male 7/16 DIN coaxial connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack 7/16 DIN male coaxial connector has a PTFE dielectric type and a VSWR of 1.3. The Pasternack 7/16 DIN coaxial connector has a brass body with tri-metal plating. Our TC-375-716M-LP 7/16 DIN connector uses brass contact. This 7/16 DIN male coaxial RF connector is RoHS and REACH compliant. This Pasternack male 7/16 DIN connector will ship the same day as purchased. Our 7/16 DIN male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 7/16 DIN connector cable assemblies that will ship the same day as well.

1 : $21.19

PE3C3755LF-6

Pasternack Enterprises

1 : $186.99
25 : $177.64
50 : $168.29
100 : $160.81

PE3C3729LF-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. BNC Male to BNC Male Cable 72 Inch Length Using RG316 Coax, LF Solder., Radio frequency assembly BNC male to BNC male cable 72 inch length using RG316 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC male cable 72 inch length using RG316 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C3729LF-72 can also be known as a BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3C3729LF-72 RF cable has a FEP jacket of 0.098-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C3729LF-72 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements.

1 : $80.29
25 : $76.28
50 : $72.26
100 : $69.05

PE3C3736

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50. SMB Plug Right Angle to SMB Plug Right Angle Cable Using RG178 Coax. PE3C3736 is a SMB plug right angle to SMB plug right angle cable using RG178 coax. This Pasternack SMB plug right angle to SMB plug right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMB for connector 2. SMB right angle to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to plug SMB right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3736 SMB plug right angle to SMB plug right angle cable assembly is constructed with RG178 coax.

PE3C3749-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Push-On SMP Female Right Angle to Push-On SMP Female Right Angle Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly push-on SMP female right angle to push-on SMP female right angle low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Push-on SMP female right angle to push-on SMP female right angle low loss cable 100 cm length using LMR-100 coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our low loss right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. PE3C3749-100CM can also be known as a low loss right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C3749-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female right angle to push-on SMP female right angle low loss cable 100 cm length using LMR-100 coax.

1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06

PE3C3749-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Push-On SMP Female Right Angle to Push-On SMP Female Right Angle Low Loss Cable 36 Inch Length Using LMR-100 Coax., Radio frequency assembly push-on SMP female right angle to push-on SMP female right angle low loss cable 36 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Push-on SMP female right angle to push-on SMP female right angle low loss cable 36 inch length using LMR-100 coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our low loss right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. PE3C3749-36 can also be known as a low loss right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C3749-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female right angle to push-on SMP female right angle low loss cable 36 inch length using LMR-100 coax.

1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06

PE3C3781

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50. TNC Male to BNC Female Cable Using LMR-240 Coax. PE3C3781 is a TNC male to BNC female cable using LMR-240 coax. This Pasternack TNC male to BNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm BNC for connector 2. Our male TNC to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3781 TNC male to BNC female cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C3705

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50. 2.4mm Female to Mini SMP Female Cable Using PE-P086 Coax. PE3C3705 is a 2.4mm female to Mini SMP female cable using PE-P086 coax. This Pasternack 2.4mm female to Mini SMP female cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm Mini SMP for connector 2. Our female 2.4mm to female Mini SMP cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3705 2.4mm female to Mini SMP female cable assembly is constructed with PE-P086 coax.

PE3C3757-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to TNC Female Low Loss Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA male to TNC female low loss cable 24 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC female low loss cable 24 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss a SMA to a TNC cable assembly has male gender on end 1 and female on end 2. PE3C3757-24 can also be known as a low loss SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3757-24 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to TNC jack cable assembly PE3C3757-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C3757-24 can also be used in the other direction and will be TNC female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $86.69
25 : $82.36
50 : $78.02
100 : $74.55

PE3C3787

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: F, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93. 50 Ohm N Female to 75 Ohm F Female Bulkhead Cable Using 93 Ohm RG62 Coax. PE3C3787 is a N type female to F type female bulkhead cable using RG62 coax. This Pasternack type N female to type F female bulkhead cable assembly uses a 50 Ohm type N for connector 1 and a 75 Ohm type F for connector 2. Our female type N to female F type bulkhead cable assembly uses a flexible cable type that is 93 Ohm. Pasternack PE3C3787 type N female to type F female bulkhead cable assembly is constructed with RG62 coax.

PE3C3701

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50. SMA Male to SMA Male Right Angle Cable Using LMR-240 Coax. PE3C3701 is a SMA male to SMA male right angle cable using LMR-240 coax. This Pasternack SMA male to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3701 SMA male to SMA male right angle cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C3738

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. SMA Male to N Male Cable Using RG223 Coax., Radio frequency assembly SMA male to N male cable using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N male cable using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our SMA to N type cable assembly has male gender on end 1 and male on end 2. PE3C3738 can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to N type plug cable assembly PE3C3738 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has crimp/solder attachment method and brass body with tri-metal plating.Additional dimensions, specifications and CAD drawings for this PE3C3738 RF cable are available on our downloadable PDF datasheet.PE3C3738 can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

PE3C3749/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Push-On SMP Female Right Angle to Push-On SMP Female Right Angle Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly push-on SMP female right angle to push-on SMP female right angle low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Push-on SMP female right angle to push-on SMP female right angle low loss cable using LMR-100 coax with heatshrink, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our low loss right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. PE3C3749/HS can also be known as a low loss right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C3749/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female right angle to push-on SMP female right angle low loss cable using LMR-100 coax with heatshrink.

Teledyne HiRel

CY7C374I-83JI

Teledyne HiRel

PROGRAMMABLE LOGIC DEVICE, ELECTRICALLY ALTERABLE, FLASH, 128 MACROCELL

MM54C373J/883

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS

MM54C374J/883

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS

Venkel Ltd.

MELFC0102-YC-3741DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�50PPM;3.74K;�0.5%
RoHS : Compliant

MELFC0207-XC-3744FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�50PPM;3.74M;�1%
RoHS : Compliant

MELFM0207-VC-37R4DT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�50PPM;37.4R;�0.5%
RoHS : Not Compliant

HPTF0603-SC-3740FT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�50PPM;374R;�1%
RoHS : Compliant

HPTF0603-SC-37R4BT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�50PPM;37.4R;�0.1%
RoHS : Compliant

HPTF0805-TC-3741DT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�50PPM;3.74K;�0.5%
RoHS : Compliant

HPTF1206-UC-3741AT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�50PPM;3.74K;�0.05%
RoHS : Compliant

MELFC0102-YC-37R4DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�50PPM;37.4R;�0.5%
RoHS : Compliant

MELFC0204-TC-3741CT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;3.74K;�0.25%
RoHS : Compliant

MELFC0207-VC-3742CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�50PPM;37.4K;�0.25%
RoHS : Compliant

MELFC0207-XC-3740CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�50PPM;374R;�0.25%
RoHS : Compliant

TFCR0402-16W-C-3700BT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;370R;�0.1%
RoHS : Compliant

TFCR0402-16W-C-3741CT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;3.74K;�0.25%
RoHS : Compliant

TFCR0603-10W-C-3791FT

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;3.79K;�1%
RoHS : Compliant

TFCR0603-10W-C-37R9BT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;37.9R;�0.1%
RoHS : Compliant

Waytek, Inc.

22CC37D0250B

Essentra Components

1/4" Nylon Cable Clamp Black Size 10 Stud 3/8" Wide

100 : $0.079
200 : $0.0759
500 : $0.0704
1,000 : $0.0669
5,000 : $0.0645

114,608

22CC37D0500

Essentra Components

1/2" Nylon Cable Clamp Natural Size 10 Stud 3/8" Wide

100 : $0.0761
200 : $0.0732
500 : $0.0707
1,000 : $0.0673
5,000 : $0.0648

31,964

22CC37D0375B

Essentra Components

3/8" Nylon Cable Clamp Black Size 10 Stud 3/8" Wide

100 : $0.0864
200 : $0.0833
500 : $0.077
1,000 : $0.0713
5,000 : $0.0677

29,880

22CC37D0500B

Essentra Components

1/2" Nylon Cable Clamp Black Size 10 Stud 3/8" Wide

100 : $0.1086
200 : $0.1044
500 : $0.1008
1,000 : $0.0959
5,000 : $0.0923

17,747

22CC37D0187B

Essentra Components

3/16" Nylon Cable Clamp Black Size 10 Stud 3/8" Wide

100 : $0.0784
200 : $0.0753
500 : $0.0698
1,000 : $0.0664
5,000 : $0.0639

16,277

22CC37D0125B

Essentra Components

1/8" Nylon Cable Clamp Black Size 10 Stud 3/8" Wide

100 : $0.1002
200 : $0.0926
500 : $0.0842
1,000 : $0.0778
5,000 : $0.0742

15,281

22CC37D0250

Essentra Components

1/4" Nylon Cable Clamp Natural Size 10 Stud 3/8" Wide
RoHS : Compliant

100 : $0.1019
200 : $0.082
500 : $0.0769
1,000 : $0.0705
5,000 : $0.0631

11,009

22CC37D0312B

Essentra Components

5/16" Nylon Cable Clamp Black Size 10 Stud 3/8" Wide

100 : $0.0741
200 : $0.0713
500 : $0.0689
1,000 : $0.0653
5,000 : $0.0632

7,668

22CC37D0375

Essentra Components

3/8" Nylon Cable Clamp Natural Size 10 Stud 3/8" Wide
RoHS : Compliant

100 : $0.0859
200 : $0.0814
500 : $0.0757
1,000 : $0.0712
5,000 : $0.0622

7,183

22CC37D0187

Essentra Components

3/16" Nylon Cable Clamp Natural Size 10 Stud 3/8" Wide

100 : $0.0784
200 : $0.0755
500 : $0.0729
1,000 : $0.0692
5,000 : $0.0669

5,460

22CC37D0437B

Essentra Components

7/16" Nylon Cable Clamp Black Size 10 Stud 3/8" Wide

100 : $0.0902
200 : $0.0868
500 : $0.0841
1,000 : $0.0797
5,000 : $0.077

5,457

22CC37D0312

Essentra Components

5/16" Nylon Cable Clamp Natural Size 10 Stud 3/8" Wide

100 : $0.0865
200 : $0.0834
500 : $0.0805
1,000 : $0.0764
5,000 : $0.0739

2,666

22CC37D0437

Essentra Components

7/16" Nylon Cable Clamp Natural Size 10 Stud 3/8" Wide

100 : $0.0874
200 : $0.0811
500 : $0.0767
1,000 : $0.0732
5,000 : $0.0695

1,645

Win Source Electronics

LTC3786EUD#TRPBF

Linear Technology

IC REG CTRLR MULT TOPOLOGY 16QFN / DC/DC Cntrlr Single-OUT Step Up 900kHz Automotive 16-Pin QFN EP T/R
RoHS : Compliant

52 : $5.8124
39 : $6.483
30 : $6.7066
22 : $6.9301
14 : $7.1537
6 : $8.7186

19,190

LTC3785EUF

Analog Devices Inc

IC POWER MANAGEMENT
RoHS : Not Compliant

110 : $3.072
88 : $3.2
68 : $3.328
47 : $3.584
31 : $3.712
15 : $3.9679

12,296

LTC3786EMSE#TRPBF

Linear Technology

IC REG CTRLR MULT TOP 16MSOP / DC/DC Cntrlr Single-OUT Step Up 900kHz Automotive 16-Pin MSOP EP T/R
RoHS : Compliant

49 : $6.1775
37 : $6.8903
29 : $7.1279
21 : $7.3655
14 : $7.6031
6 : $9.2662

11,510

TLC372MDRG4

Texas Instruments

IC DIFF COMPARATOR DUAL 8-SOIC
RoHS : Compliant

615 : $0.4888
460 : $0.5452
355 : $0.564
260 : $0.5828
170 : $0.6016
70 : $0.7331

8,640

74HC374DR

Nexperia

565 : $0.5963
455 : $0.6206
350 : $0.6448
245 : $0.6933
160 : $0.7175
75 : $0.766

8,610

LTC3728LXCUH#PBF

Linear Technology

IC REG CTRLR BUCK 32QFN
RoHS : Compliant

50 : $6.7853
40 : $7.061
31 : $7.3369
22 : $7.8885
14 : $8.1644
7 : $8.716

4,130

SN74LVC373APW

Texas Instruments

OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS | IC OCT D TRNSP LATCH 3ST 20TSSOP
RoHS : Compliant

860 : $0.3507
640 : $0.3911
495 : $0.4046
360 : $0.4181
235 : $0.4316
100 : $0.526

3,699

SN74LVC373APWE4

Texas Instruments

IC OCT D TRNSP LATCH 3ST 20TSSOP / D-Type Transparent Latch 1 Channel 8:8 IC Tri-State 20-TSSOP
RoHS : Compliant

1,085 : $0.2775
870 : $0.2888
670 : $0.3
465 : $0.3226
300 : $0.3339
145 : $0.3564

3,530

LTC3780IUH#TRPBF

Linear Technology

IC REG CTRLR BUCK-BOOST 32QFN
RoHS : Compliant

22 : $14.2523
16 : $15.8968
13 : $16.4449
9 : $16.9931
6 : $17.5413
3 : $21.3784

2,290

LTC3714EG#TRPBF

Linear Technology

DC/DC Cntrlr Single-OUT Step Down 2000kHz 28-Pin SSOP T/R / IC STP-DWN CNTRLR W/OPAMP 28SSOP
RoHS : Compliant

35 : $8.797
26 : $9.8121
20 : $10.1504
15 : $10.4888
10 : $10.8271
4 : $13.1955

1,910

LTC3708EUH#TRPBF

Linear Technology

IC REG CTRLR BUCK 32QFN
RoHS : Compliant

13 : $26.0776
10 : $29.0866
8 : $30.0896
6 : $31.0925
4 : $32.0956
2 : $39.1164

1,370

LTC3728EUH#PBF

Linear Technology

DC/DC Cntrlr Dual-OUT Step Down 590kHz Automotive 32-Pin QFN EP Tube / IC REG CTRLR BUCK 32QFN
RoHS : Compliant

18 : $17.0381
14 : $19.004
11 : $19.6593
8 : $20.3146
5 : $20.9699
2 : $25.5571

1,300

LTC3727EG-1#PBF

Linear Technology

IC REG CTRLR BUCK 28SSOP
RoHS : Compliant

25 : $12.308
19 : $13.7281
15 : $14.2015
11 : $14.6749
7 : $15.1482
3 : $18.4619

1,000

HMC3716LP4ETR

Analog Devices Inc

IC RF DETECT 10MHZ-1.3GHZ 24QFN
RoHS : Compliant

1 : $1,674.2426

LTC3780IUH#PBF

Linear Technology

IC REG CTRLR BUCK-BOOST 32QFN
RoHS : Compliant

14 : $22.0683
11 : $24.6146
8 : $25.4634
6 : $26.3122
4 : $27.1609
2 : $33.1024

C37L-AF5-R Verteiler

Link URL