 |
Datenblatt-Suchmaschine für elektronische Bauteile |
|
|
Datenblatt-Suchmaschine für elektronische Bauteile |
|
C850.. Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
 Verical | C850-2G3R-54 | Bel Fuse | Conn RJ-45 RCP 48 POS Solder RA Thru-Hole 84 Terminal 6 Port Tray RoHS : Exempt |
| 466 | |
| C850-2C2R-54 | Bel Power Solutions | Conn RJ-45 RCP 40 POS 2.54mm Solder RA Thru-Hole 56 Terminal 4 Port Tray RoHS : Exempt |
| 259 | ||
| C850X1100YJJ | Panduit Corp | Labels Component Label Polyester White 215.9x279.4mm RoHS : Compliant |
| 50 | ||
| C850X1100YML | Panduit Corp | Labels Component Label Polyester Silver 215.9x279.4mm |
| 25 | ||
 Avnet Americas | BC850C,235 | Nexperia | Trans GP BJT NPN 45V 0.1A 3-Pin TO-236AB T/R - Tape and Reel (Alt: BC850C,235) RoHS : Compliant | 90,000 | ||
| VSC8504XKS-05 | Microchip Technology Inc | PHY 4-Channel 1Gbps 256-Ball BGA Tray - Trays (Alt: VSC8504XKS-05) RoHS : Compliant |
| 90 | ||
| CC8-50000BCNGNHWS | Vishay Intertechnologies | - Waffle Pack (Alt: CC8-50000BCNGNHWS) RoHS : Compliant | 0 | |||
| BC850BE6327HTSA1 | Infineon Technologies AG | Trans GP BJT NPN 45V 0.1A 3-Pin SOT23 T/R - Tape and Reel (Alt: BC850BE6327HTSA1) RoHS : Compliant |
| 0 | ||
| RCEC850S220R0JB | Vishay Intertechnologies | RCEC 850 S2 20U 5% BO25 - Boxed Product (Development Kits) (Alt: RCEC850S220R0JB) RoHS : Not Compliant |
| 0 | ||
| RN55C8501FB14 | Vishay Intertechnologies | Through Hole Resistor, 8.5 kohm, RN Series, 100 mW, ? 1%, Axial Leaded, 200 V, Metal Film - Bulk (Alt: RN55C8501FB14) RoHS : Not Compliant |
| 0 | ||
| RLR07C8500FSRE5 | Vishay Intertechnologies | Through Hole Resistor, 850 ohm, RLR Series, 250 mW, ? 1%, Axial Leaded, 250 V, Metal Film - Tape and Reel (Alt: RLR07C8500FSRE5) RoHS : Not Compliant |
| 0 | ||
| APC-8-500 | Mean Well | - Boxed Product (Development Kits) (Alt: APC-8-500) RoHS : Compliant |
| 0 | ||
| FDBC850QE1C03 | Coherent Inc | - Bulk (Alt: FDBC850QE1C03) RoHS : Compliant |
| 0 | ||
| XFC23C850.053267K | SiTime Corporation | - Product that comes on tape, but is not reeled (Alt: XFC23C850.053267K) RoHS : Compliant | 0 | |||
| VSC8502XML | Microchip Technology Inc | PHY 2-CH 1000Mbps 135-Pin QFN - Trays (Alt: VSC8502XML) RoHS : Compliant |
| 0 | ||
| RCEC850S13303JB | Vishay Intertechnologies | - Boxed Product (Development Kits) (Alt: RCEC850S13303JB) RoHS : Not Compliant |
| 0 | ||
| MRJR5C8501 | Amphenol Corporation | Connector RJ45 Receptacle 8 Position Solder Right Angle Through Hole 12 Terminal 1 Port Tray - Boxed Product (Development Kits) (Alt: MRJR5C8501) RoHS : Not Compliant |
| 0 | ||
| RLR07C8500FSB14 | Vishay Intertechnologies | Through Hole Resistor, 850 ohm, RLR Series, 250 mW, ? 1%, Axial Leaded, 250 V, Metal Film - Bulk (Alt: RLR07C8500FSB14) RoHS : Not Compliant |
| 0 | ||
| RLR07C8500FSRE8 | Vishay Intertechnologies | Through Hole Resistor, 850 ohm, RLR Series, 250 mW, ? 1%, Axial Leaded, 250 V, Metal Film - Tape and Reel (Alt: RLR07C8500FSRE8) RoHS : Not Compliant |
| 0 | ||
 Arrow Electronics | C850-2G3R-54 | Bel Fuse | Conn RJ-45 RCP 48 POS Solder RA Thru-Hole 84 Terminal 6 Port Tray RoHS : Exempt |
| 466 | |
 Newark | BC850B | Diotec Semiconductor AG | TRANSISTOR, NPN, 45V, 0.1A, SOT-23; RoHS : Compliant |
| 23,075 | |
| BC850B | Diotec Semiconductor AG | TRANSISTOR, NPN, 45V, 0.1A, SOT-23; RoHS : Compliant |
| 23,075 | ||
| BC850B,215 | Nexperia | TRANSISTOR, NPN, SOT-23; RoHS : Compliant |
| 6,743 | ||
| BC850B,215 | Nexperia | TRANSISTOR, NPN, SOT-23; RoHS : Compliant |
| 6,743 | ||
| BC850A | Diotec Semiconductor AG | TRANSISTOR, NPN, 45V, 0.1A, SOT-23; RoHS : Compliant |
| 2,975 | ||
| BC850A | Diotec Semiconductor AG | TRANSISTOR, NPN, 45V, 0.1A, SOT-23; RoHS : Compliant |
| 2,975 | ||
| BC850C-AQ | Diotec Semiconductor AG | TRANSISTOR, NPN, 45V, 0.1A, SOT-23; RoHS : Compliant |
| 2,520 | ||
| BC850C-AQ | Diotec Semiconductor AG | TRANSISTOR, NPN, 45V, 0.1A, SOT-23; RoHS : Compliant |
| 2,520 | ||
| MLVC12V012C850 | Eaton Bussmann | VARISTOR, MLV, 34V, 1206; RoHS : Compliant |
| 1,970 | ||
| MLVC12V012C850 | Eaton Bussmann | VARISTOR, MLV, 34V, 1206; RoHS : Compliant |
| 1,970 | ||
| B32754C8505J000 | TDK Corporation | CAP, POWER FILM, 5UF, 580V, RADIAL; RoHS : Compliant |
| 784 | ||
| MCT25X12X15C-850PU | SPC Multicomp | CHOKE, COMMON MODE, 85UH, 12A; RoHS : Compliant |
| 778 | ||
| BC850C | Diotec Semiconductor AG | TRANSISTOR, NPN, 45V, 0.1A, SOT-23; RoHS : Compliant |
| 385 | ||
| APC-8-500 | Mean Well | LED DRIVER, CONSTANT CURRENT, 8W; RoHS : Compliant |
| 16 | ||
| EV1HMC8500PM5 | Analog Devices Inc | EVALUATION BOARD, 10W, POWER AMPLIFIER; RoHS : Compliant |
| 2 | ||
 Analog Devices Inc | HMC8500PM5E | Analog Devices Inc | High Power GaN Amps- 10W 1 - 2 RoHS : Compliant |
| 126 | |
| HMC850LC3TR | Analog Devices Inc | 1:2 Fanout 26GHz RoHS : Compliant |
| 102 | ||
| EV1HMC8500PM5 | Analog Devices Inc | High Power GaN Amps- 10W 1 - 2 RoHS : Compliant |
| 42 | ||
| DC850A | Analog Devices Inc | LTC3783 - 3V-14.4Vin to 25V @ |
| 31 | ||
| 125614-HMC850LC3 | Analog Devices Inc | EVALUATION PCB ASSEMBLY RoHS : Compliant |
| 22 | ||
| HMC850LC3 | Analog Devices Inc | 500 Fanout 26GHz RoHS : Compliant |
| 2 | ||
| HMC8500PM5ETR | Analog Devices Inc | High Power GaN Amps- 10W 1 - 2 RoHS : Compliant |
| 0 | ||
| HMC850LC3TR-R5 | Analog Devices Inc | 1:2 Fanout 26GHz RoHS : Compliant |
| 0 | ||
 RS | KT-LED15T8-48GC-850-DX2 | Keystone Technologies LLC | 15W, 2000 LUMEN, 4', 240' BEAM ANGLE, BALLAST BYPASS, 5000K- DLC 4.0, COATED |
| 188 | |
| KT-LED25T5HO-48GC-850-DX2 | Keystone Technologies LLC | 25W, 3400 LUMEN, 4', 240' BEAM ANGLE, BALLAST BYPASS, 5000K, DLC 4.0 |
| 55 | ||
| WLB32C850PBQ (87483) | Banner Engineering Corp | LED LIGHT BAR, INDUSTRIAL, WHITE, 1800 LUMENS, 12-30VDC, 850MM LONG, M12, 87483 |
| 31 | ||
| WLB32ZC850PBQMB (87495) | Banner Engineering Corp | INDUSTRIAL LED LIGHT BAR, 3 FT, HI/LOW/OFF SWITCH, AC, 6 FT POWER CORD, IP50 |
| 16 | ||
| KT-LED25.5T5HO-48GC-850-S | Keystone Technologies LLC | 25W, 3200 LUMEN, 4', 240' BEAM ANGLE, BALLAST COMPATIBLE, 5000K, DLC 4.0 |
| 15 | ||
| WLB32ZC850PBQM (87491) | Banner Engineering Corp | LIGHT BAR, LED, 850MM LONG, 1800 LUMENS, 85-264VAC, SWITCHED, CASCADABLE, 87491 |
| 10 | ||
| BC850R | Tripp Lite | UPS, 850VA, 450W, 120V STANDBY, 5 NEMA 5-15R OUTLETS, 5-15P PLUG, DESKTOP RoHS : Compliant |
| 6 | ||
| WLB32ZC850EPBQMB (97838) | Banner Engineering Corp | WORK LIGHT BAR, 850MM, 90-264 VAC, IP50, WHT, CASCADABLE, QD, WLB32 SERIES |
| 6 | ||
| AFC8503 | Panasonic Electronic Components | PLC PROGRAMMING CABLE ROUND D-SUB, 9-PIN, L-SHAPED TYPE, FP SERIES |
| 5 | ||
| BC850RNC | Tripp Lite | UPS, CLOUD CONNECTED WITH REMOTE, 850VA, 450W, 120V STANDBY, DESKTOP |
| 1 | ||
| WLB32ZC850QM | Banner Engineering Corp | WORK LIGHT BAR;SWITCHLESS;850MM.;85-264VAC;IP50;WHITE;CASCADABLE;96005 |
| 1 | ||
| MAQDC-850 (72511) | Banner Engineering Corp | CORDSET, STRAIGHT M12 FEMALE, 8 CONDUCTOR, 15 M, BLACK PVC, MAQDC SERIES |
| 1 | ||
| KT-RHLED200-14C-850-VDIM-P /G2 | Keystone Technologies LLC | 200W, 5000K, 0-10V DIMMING, PREMIUM SERIES, 90DEG BEAM ANGLE, GENERATION 2 |
| 1 | ||
| KT-LED11.5T8-48GC-850-S (KT-LED11.5T8-48GC-850-S-CP) | Keystone Technologies LLC | LED T8 LAMP,11.5W,1800 LUMEN, 4FT, 220' BEAM,5000K, BALLAST COMPATIBLE, SMARTDRIV |
| 0 | ||
| KT-RKIT19AC-7C-850-FDIM (KT-RKIT19AC-7C-850-FDIM-IP) | Keystone Technologies LLC | ROUND AC LED LIGHT ENGINE KIT, PHASE DIMMING, 7", 19W, 5000K,>80 CRI, FUTURE F |
| 0 | ||
 Microchip Technology Inc | VSC8501XML | Microchip Technology Inc | 1 Port GbE Cu PHY with (G/RG)MII, QFN, Projected EOL: 2045-10-19 RoHS : Compliant |
| 4,256 | |
| VSC8502XML | Microchip Technology Inc | 2 Port GbE Cu PHY with (G/RG)MII, QFN, Projected EOL: 2045-10-19 RoHS : Compliant |
| 760 | ||
| VSC8504XKS-02 | Microchip Technology Inc | 4 Port GbE Cu/Fiber PHY with (Q)SGMII, PBGA, Projected EOL: 2045-10-19 RoHS : Compliant |
| 94 | ||
TC850ILW | Microchip Technology Inc | 16 Bit Hi Speed A/D, PLCC, Projected EOL: 2027-05-01 - Contact for Pricing RoHS : Compliant | 0 | |||
TC850CPL | Microchip Technology Inc | 16 Bit Hi Speed A/D, PDIP, Projected EOL: 2027-05-01 - Contact for Pricing RoHS : Compliant | 0 | |||
| TC850CLW | Microchip Technology Inc | 16 Bit Hi Speed A/D, PLCC, Projected EOL: 2027-05-01 - Contact for Pricing RoHS : Compliant | 0 | |||
| TC850CLW713 | Microchip Technology Inc | 16 Bit Hi Speed A/D, PLCC, Projected EOL: 2027-05-01 - Contact for Pricing RoHS : Compliant | 0 | |||
| VSC8504XKS-04 | Microchip Technology Inc | 4 Port GbE Cu/Fiber PHY with (Q)SGMII (Ind. Temp), PBGA, Projected EOL: 2028-10-19 - Contact for Pricing RoHS : Compliant | 0 | |||
| VSC8504XKS-01 | Microchip Technology Inc | 4 Port GbE Cu/Fiber PHY with (Q)SGMII, PBGA, Projected EOL: 2028-10-19 - Contact for Pricing RoHS : Compliant | 0 | |||
| VSC8504XKS-05 | Microchip Technology Inc | 4 Port GbE Cu/Fiber PHY with (Q)SGMII (Ind. Temp), PBGA, Projected EOL: 2045-10-19 RoHS : Compliant |
| 0 | ||
| VSC8501XML-03 | Microchip Technology Inc | 1 Port GbE Cu PHY with (G/RG)MII (Ind. Temp), QFN, Projected EOL: 2045-10-19 RoHS : Compliant |
| 0 | ||
| VSC8502XML-03 | Microchip Technology Inc | 2 Port GbE Cu PHY with (G/RG)MII (Ind. Temp), QFN, Projected EOL: 2045-10-19 RoHS : Compliant |
| 0 | ||
 Onlinecomponents.com | C850-2C2R-54 | Bel Power Solutions | CONN JACK 4PORT PCB RoHS : Compliant |
| 259 | |
| C850-2G4R-54 | Bel Power Solutions | RoHS : Compliant |
| 0 | ||
| C850-2G6R-54 | Bel Power Solutions | RoHS : Compliant |
| 0 | ||
| C850-260-WH | Bourns Inc | TBU Bidirectional 850V 425V 260mA 1us DFN SMD T/R RoHS : Compliant |
| 0 | ||
| C850-180-WH | Bourns Inc | TBU Bidirectional 850V 425V 180mA 1us DFN SMD T/R RoHS : Compliant |
| 0 | ||
| C850-100-WH | Bourns Inc | TBU Bidirectional 850V 425V 1us DFN SMD T/R RoHS : Compliant |
| 0 | ||
| C850-2G3R-54 | Bel Power Solutions | RoHS : Compliant |
| 0 | ||
 Rochester Electronics | BC850C,215 | NXP Semiconductors | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon, TO-236AB RoHS : Compliant |
| 1,060 | |
BC850BW,115 | NXP Semiconductors | Trans BJTs Single 45V 100mA SOT-323 T/R RoHS : Compliant |
| 4,200 | ||
| BC850BW,135 | NXP Semiconductors | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant |
| 10,000 | ||
| BC850C,215 | Nexperia | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon, TO-236AB RoHS : Compliant |
| 263,259 | ||
| BC850B,215 | Nexperia | Trans BJTs Single 45V 100mA SOT-23-3 T/R RoHS : Compliant |
| 15 | ||
BC850CW/ZLX | Nexperia | Small Signal Bipolar Transistor RoHS : Compliant |
| 570,000 | ||
| BC850BW,115 | Nexperia | Trans BJTs Single 45V 100mA SOT-323 T/R RoHS : Compliant |
| 22,393 | ||
| BC850BW,135 | Nexperia | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant |
| 307,300 | ||
| BC850BE6327HTSA1 | Infineon Technologies AG | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant |
| 670,350 | ||
| BC850CE6327HTSA1 | Infineon Technologies AG | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant |
| 160,131 | ||
| BC850BWH6327XTSA1 | Infineon Technologies AG | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant |
| 430,141 | ||
| BC850BMTF | Fairchild Semiconductor Corporation | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant |
| 97,500 | ||
| BC850C | Fairchild Semiconductor Corporation | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant |
| 3,000 | ||
| MC8507P | Motorola Mobility LLC | Interrupt Controller, Bipolar, PDIP24 RoHS : Not Compliant |
| 3,788 | ||
| XPC850ZT66BU | Motorola Mobility LLC | RISC Microprocessor, 32-Bit, 66MHz, CMOS, PBGA256 RoHS : Not Compliant |
| 55 | ||
 Sager | APC-8-500 | Mean Well | LED Power Supplies 8W 24V 500mA CC LED PS RoHS : Compliant |
| 128 | |
| C-8505-7 | General Devices | General Devices |
| 4 | ||
| MLVC12V012C850 | Eaton Bussmann | Varistors 12VDC 850PF |
| 0 | ||
| C85074-000 | TE Connectivity | Multi-Conductor Cables 55PC4224-24-6/9-92 RoHS : Compliant |
| 0 | ||
| EZC8500SLCK | ABB Group | ALUM QUICK DISC TRANS CONNECTOR |
| 0 | ||
| ABC8500C | ABB Group | SSCREW PED CONN 6-500 8OUTL OI |
| 0 | ||
| EZC8500SLC3K | ABB Group | AL TFR CONN NO6-500 3 PHASE |
| 0 | ||
| NC850-10 | ABB Group | Enclosures, Boxes, & Cases | 0 | |||
| C85041-000 | TE Connectivity | Circular MIL Spec Strain Reliefs & Adapters TX40SJ90-1610 RoHS : Compliant | 0 | |||
| C850-2G8R-M9 | Bel Fuse | Modular Connectors / Ethernet Connectors RoHS : Compliant | 0 | |||
| C850-2G8R-54 | Bel Fuse | Modular Connectors / Ethernet Connectors RoHS : Compliant | 0 | |||
| C850X1100YML | Panduit Corp | Wire Labels & Markers Laser Only Comp Lbl ADH Po | 0 | |||
| C-8505-14 | General Devices | General Devices |
| 0 | ||
| NC850 | ABB Group | Enclosures, Boxes, & Cases | 0 | |||
| ABC8500 | ABB Group | SSCREW PED CONN 6-500 8OUTL |
| 0 | ||
 Coilcraft Direct | SLR1050C-850KEC | Coilcraft Inc | Power inductor, shielded, 10% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 236 | |
 TME | BC850B,215 | Nexperia | Transistor: NPN; bipolar; 45V; 0.1A; 250mW; SOT23,TO236AB RoHS : Compliant |
| 9,000 | |
| BC850BE6327 | Infineon Technologies AG | Transistor: NPN; bipolar; 45V; 0.1A; 0.33W; SOT23 RoHS : Compliant |
| 3,982 | ||
| BC850CLT1G | onsemi | Transistor: NPN; bipolar; 45V; 0.1A; 0.225W; SOT23,TO236AB RoHS : Compliant |
| 2,835 | ||
| BC850C-AQ | Diotec Semiconductor AG | Transistor: NPN; bipolar; 45V; 0.1A; 250mW; SOT23 RoHS : Compliant |
| 677 | ||
| BC850CE6327 | Infineon Technologies AG | Transistor: NPN; bipolar; 45V; 0.1A; 0.33W; SOT23 RoHS : Compliant |
| 48 | ||
| UPS-PC-850AP | Gembird Electronics Ltd | Power supply: UPS; 520W; 850VA; 230V; IEC C13 x2; 340x165x95mm |
| 15 | ||
| AFTC 8502 | AFTC Group | Tape: fixing; W: 6mm; L: 55m; Thk: 0.25mm; double-sided; acrylic |
| 10 | ||
| AFTC 8502 | AFTC Group | Tape: fixing; W: 19mm; L: 25m; Thk: 0.25mm; double-sided; acrylic |
| 2 | ||
| AFTC 8502 | AFTC Group | Tape: fixing; W: 9mm; L: 5m; Thk: 0.25mm; double-sided; acrylic |
| 1 | ||
| SPC 8500 | OPTIBELT GmbH | Wedge belt; SPC; 8500mm; metric; SK; Features: improved durability |
| 0 | ||
| NSVBC850BLT1G | onsemi | Transistor: NPN; bipolar; 45V; 0.1A; 0.225W; SOT23,TO236AB RoHS : Compliant |
| 0 | ||
| AFTC 8502 | AFTC Group | Tape: fixing; W: 19mm; L: 55m; Thk: 0.25mm; double-sided; acrylic |
| 0 | ||
| AFTC 8502 | AFTC Group | Tape: fixing; W: 9mm; L: 25m; Thk: 0.25mm; double-sided; acrylic |
| 0 | ||
| AFTC 8502 | AFTC Group | Tape: fixing; W: 12mm; L: 25m; Thk: 0.25mm; double-sided; acrylic |
| 0 | ||
| AFTC 8502 | AFTC Group | Tape: fixing; W: 25mm; L: 5m; Thk: 0.25mm; double-sided; acrylic |
| 0 | ||
 ComSIT USA | BC850BW115 | Nexperia | AVAILABLE EU | 16,480 | ||
ComSIT USA | BC850C | NXP Semiconductors | NPN GENERAL PURPOSE TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon, TO-236AB RoHS : Compliant | 23,120 | ||
| BC850BRTKP | KEC | EPITAXIAL PLANAR NPN TRANSISTOR Small Signal Bipolar Transistor RoHS : Compliant | 9,965 | |||
BC850BW | NXP Semiconductors | NPN GENERAL PURPOSE TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant | 3,000 | |||
| BC850B | NXP Semiconductors | NPN general purpose transistor Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant | 2,985 | |||
| BC850BLT1 | onsemi | NPN SILICON GENERAL PURPOSE TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon, TO-236AB RoHS : Compliant | 2,715 | |||
| BC850BE6327 | Infineon Technologies AG | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant | 2,470 | |||
| BC850CE6327 | Infineon Technologies AG | NPN SILICON AF TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant | 2,310 | |||
| XPC850SRCZT50BU | Motorola Semiconductor Products | POWERQUICC INTEGRATED COMMUNICATIONS PROCESSOR RISC Microprocessor, 32-Bit, 50MHz, CMOS, PBGA256 RoHS : Not Compliant | 297 | |||
XPC850ZT50BU | Freescale Semiconductor | POWERQUICC INTEGRATED COMMUNICATIONS PROCESSOR RISC Microprocessor, 32-Bit, 50MHz, CMOS, PBGA256 RoHS : Not Compliant | 120 | |||
| XPC850SRZT80B | Motorola Semiconductor Products | ONE-CHIP INTEGRATED MICROPROCESSOR RISC Microprocessor, 32-Bit, 80MHz, CMOS, PBGA256 RoHS : Not Compliant | 50 | |||
| XPC850TZP66D3 | Motorola Semiconductor Products | Electronic Component RoHS : Not Compliant | 24 | |||
| XPC850SRCZT50BT | Motorola Semiconductor Products | ONE-CHIP INTEGRATED MICROPROCESSOR RISC Microprocessor, 32-Bit, 50MHz, CMOS, PBGA256 RoHS : Not Compliant | 23 | |||
XR16C850CM | Exar Corporation | 2.97V TO 5.5V UART WITH 128-BYTE FIFO Serial I/O Controller, 1 Channel(s), 0.28125MBps, CMOS, PQFP48 RoHS : Not Compliant | 7 | |||
| KXPC850DSLZT50BU | Motorola Semiconductor Products | IC MPU MPC8xx 32Bit 1 Core 50MHz 256-BGA Tray RoHS : Not Compliant | 6 | |||
| XPC850DSLZT50BU | Motorola Semiconductor Products | POWERQUICC INTEGRATED COMMUNICATIONS PROCESSOR RISC Microprocessor, 32-Bit, 50MHz, CMOS, PBGA256 RoHS : Not Compliant | 5 | |||
 Interstate Connecting Components | C850-2C2R-54 | Bel Fuse | RoHS : Compliant |
| 42 | |
| TC8501 | L-com Inc |
| 18 | |||
| C85068N001 | TE Connectivity | BSM-25/95 | 0 | |||
| C85074-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55PC4224-24-6/9-92 RoHS : Compliant | 0 | |||
| MRJR5C8501 | Amphenol Commercial | HARSH RJ45, IP67, PANEL MOUNT, | 0 | |||
| EC8505-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCHX095YW2DS050B | 0 | |||
 NexGen Digital | BC850C,215 | NXP Semiconductors | RoHS : Compliant | 2,289 | ||
 Powell Electronics | SDC-850 | Bivar Inc | Snap-In Card Guide, 8.5 in. Length, 0.07 |
| 15,136 | |
 Richardson RFPD | EV1HMC8500PM5 | Analog Devices Inc | HMC8500PM5E RF Amplifier Evaluation Board RoHS : Compliant |
| 0 | |
| DC850A | Analog Devices Inc | LTC3783 LED Driver Development Kit RoHS : Compliant |
| 0 | ||
| VSC8504XKS-05 | Microchip Technology Inc | PHY 4-CH 10Mbps/100Mbps/1Gbps 3.3V 256-Pin PBGA Tr RoHS : Compliant |
| 0 | ||
| EV1HMC8500LP5D | Analog Devices Inc | HMC8500 RF Amplifier Evaluation Board | 0 | |||
| VSC8504XKS-02 | Microchip Technology Inc | PHY 4-CH 10Mbps/100Mbps/1Gbps 3.3V 256-Pin PBGA Tr RoHS : Compliant |
| 0 | ||
| HMC850LC3 | Analog Devices Inc | Clock Fanout Buffer 2-OUT 1-IN 1:2 16-Pin CQFN EP RoHS : Compliant |
| 0 | ||
| HMC8500PM5ETR | Analog Devices Inc | RF Amp Single Power Amp 2.8GHz 32V 32-Pin LFCSP EP RoHS : Compliant |
| 0 | ||
| HMC8500PM5E | Analog Devices Inc | RF Amp Single Power Amp 2.8GHz 32V 32-Pin LFCSP EP RoHS : Compliant |
| 0 | ||
| 125614-HMC850LC3 | Analog Devices Inc | HMC850LC3 Logic and Timing Evaluation Board RoHS : Compliant |
| 0 | ||
| VSC8502XML-03 | Microchip Technology Inc | PHY 1-CH 10Mbps/100Mbps/1Gbps 3.3V 135-Pin QFN Tra RoHS : Compliant | 0 | |||
 Chip 1 Exchange | BC850C_R1_00001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 123,750 | ||
| BC850B | INSTOCK | 5,950 | ||||
| BC850CE6327 | Infineon Technologies AG | INSTOCK RoHS : Compliant | 3,820 | |||
| BC850CW E6327 | Infineon Technologies AG | INSTOCK | 3,000 | |||
| BC850CLT1 | INSTOCK | 2,600 | ||||
| BC850C | Philips Semiconductors | INSTOCK RoHS : Compliant | 580 | |||
MPC850SRVR80BU | Freescale Semiconductor | INSTOCK RoHS : Compliant | 414 | |||
| VSC8504XKS-05 | INSTOCK | 400 | ||||
| VSC8504XKS-05 | Micron Technology Inc | INSTOCK | 400 | |||
| LC850515-E | INSTOCK | 250 | ||||
| MC8504P | INSTOCK | 206 | ||||
| BC850B T/R | Philips Semiconductors | INSTOCK | 176 | |||
| XPC850ZT50B | INSTOCK | 140 | ||||
| VSC8504XKS-05 | Microchip Technology Inc | INSTOCK RoHS : Compliant | 127 | |||
| XPC850DEZT50BU | INSTOCK | 20 | ||||
 Avnet Abacus | C85074-000 | TE Connectivity | High Performance Cable 2Conductors 24AWG Silver Plated Copper Alloy WhiteRed Stripe 600Vac (Alt: C85074-000) RoHS : Compliant | 0 | ||
C850-180-WH | Bourns Inc | - Tape and Reel (Alt: C850-180-WH) RoHS : Compliant | 0 | |||
| C850-100-WH | Bourns Inc | - Tape and Reel (Alt: C850-100-WH) RoHS : Compliant | 0 | |||
| C850-260-WH | Bourns Inc | - Tape and Reel (Alt: C850-260-WH) RoHS : Compliant | 0 | |||
| B32754C8505J | TDK Corporation | 50uF 5 350Vac MKP Wound BOXED (Alt: B32754C8505J000) RoHS : Not Compliant | 0 | |||
| C850-2G4R-54 | Bel Fuse | (Alt: C850-2G4R-54) RoHS : Compliant | 0 | |||
| LXC85-0450SW | Advanced Energy Industries Inc | LED DRVR Module 1CH IP67 189V 045A (Alt: LXC85-0450SW) RoHS : Compliant | 0 | |||
| LXC85-0700SW | Advanced Energy Industries Inc | LED DRVR Module 1CH IP67 121V 07A (Alt: LXC85-0700SW) RoHS : Compliant | 0 | |||
| C850-2G3R-54 | Bel Fuse | (Alt: C850-2G3R-54) RoHS : Compliant | 0 | |||
| LXC85-0350SW | Advanced Energy Industries Inc | LED DRVR Module 1CH IP67 243V 035A (Alt: LXC85-0350SW) RoHS : Compliant | 0 | |||
| C850-2C2R-54 | Bel Fuse | (Alt: C850-2C2R-54) RoHS : Compliant | 0 | |||
| C850-2G6R-54 | Bel Fuse | (Alt: C850-2G6R-54) RoHS : Compliant | 0 | |||
| B32754C8505K | TDK Corporation | Cap Film 5uF 350VAC 580VDC PP 10 Radial Bulk (Alt: B32754C8505K000) RoHS : Not Compliant | 0 | |||
| RCEC850S12R00JB | Vishay Intertechnologies | - Tape and Reel (Alt: P0805E4701FNT) RoHS : Compliant | 0 | |||
| D2TO035C850R0JTE3 | Vishay Intertechnologies | SMD Chip Resistor 850 Ohm 5 35 W Thick Film Power (Alt: D2TO035C850R0JTE3) RoHS : Compliant | 0 | |||
Avnet Asia | BC850C,215 | Nexperia | Trans GP BJT NPN 45V 0.1A 3-Pin TO-236AB T/R (Alt: BC850C,215) RoHS : Compliant | 0 | ||
| BC850B,215 | Nexperia | Trans GP BJT NPN 45V 0.1A 3-Pin TO-236AB T/R (Alt: BC850B,215) RoHS : Compliant | 0 | |||
| BC850BW,115 | Nexperia | Trans GP BJT NPN 45V 0.1A 3-Pin SC-70 T/R (Alt: BC850BW,115) RoHS : Compliant | 0 | |||
| BC850B,235 | Nexperia | (Alt: BC850B,235) RoHS : Compliant | 0 | |||
| C850-2A3R-54 | Bel Fuse | (Alt: C850-2A3R-54) RoHS : Compliant | 0 | |||
| BC850CW,115 | Nexperia | Trans GP BJT NPN 45V 0.1A 3-Pin SC-70 T/R (Alt: BC850CW,115) RoHS : Compliant | 0 | |||
| BC850C,235 | Nexperia | Trans GP BJT NPN 45V 0.1A 3-Pin TO-236AB T/R (Alt: BC850C,235) RoHS : Compliant | 0 | |||
| BC850CLT1G | onsemi | (Alt: BC850CLT1G) RoHS : Compliant | 0 | |||
| BC850BLT1G | onsemi | (Alt: BC850BLT1G) RoHS : Compliant | 0 | |||
 Avnet Silica | BC850BLT1G | onsemi | Bipolar BJT Single Transistor NPN 45 V 100 mA 225 mW SOT23 Surface Mount (Alt: BC850BLT1G) RoHS : Compliant | 876,000 | ||
| BC850CW,115 | Nexperia | Trans GP BJT NPN 45V 01A 3Pin SC70 TR (Alt: BC850CW,115) RoHS : Compliant | 870,000 | |||
| BC850B,215 | Nexperia | Trans GP BJT NPN 45V 01A 3Pin TO236AB TR (Alt: BC850B,215) RoHS : Compliant | 36,000 | |||
| TC850ILW | Microchip Technology Inc | Analog to Digital Converter 15 bit MultiSlope 40 SPS Differential Parallel 5 V 44 Pins PLCC (Alt: TC850ILW) RoHS : Compliant | 0 | |||
| TC850CPL | Microchip Technology Inc | Analog to Digital Converter 15 bit MultiSlope 40 SPS Differential Parallel 5 V 40 Pins (Alt: TC850CPL) RoHS : Compliant | 0 | |||
| BC850C,215 | Nexperia | Trans GP BJT NPN 45V 01A 3Pin TO236AB TR (Alt: BC850C,215) RoHS : Compliant | 0 | |||
| VSC8502XML | Microchip Technology Inc | PHY 2CH 1000Mbps 135Pin QFN (Alt: VSC8502XML) RoHS : Compliant | 0 | |||
| BC850B,235 | Nexperia | (Alt: BC850B,235) RoHS : Compliant | 0 | |||
| VSC8501XML | Microchip Technology Inc | (Alt: VSC8501XML) RoHS : Compliant | 0 | |||
| BC850BW,115 | Nexperia | Trans GP BJT NPN 45V 01A 3Pin SC70 TR (Alt: BC850BW,115) RoHS : Compliant | 0 | |||
| TC850CLW713 | Microchip Technology Inc | Analog to Digital Converter 15 bit MultiSlope 40 SPS Differential Parallel 5 V 44 Pins PLCC (Alt: TC850CLW713) RoHS : Compliant | 0 | |||
| BC850BW,135 | Nexperia | Trans GP BJT NPN 45V 01A 3Pin SC70 TR (Alt: BC850BW,135) RoHS : Compliant | 0 | |||
| VSC8504XKS-05 | Microchip Technology Inc | PHY 4Channel 1Gbps 256Ball BGA Tray (Alt: VSC8504XKS-05) RoHS : Compliant | 0 | |||
| NSVBC850BLT1G | onsemi | NPN Bipolar Transistor SS SOT23 GP XSTR NPN 45V ONSSPCTRNSTVU6M5P (Alt: NSVBC850BLT1G) RoHS : Compliant | 0 | |||
| BC850BW _R1 _00001 | PanJit Semiconductor | (Alt: BC850BW_R1_00001) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | BC850CLT1G | onsemi | IN STOCK SHIP TODAY RoHS : Compliant |
| 30,490 | |
| BC850CT/R | Philips Semiconductors | IN STOCK SHIP TODAY RoHS : Compliant |
| 17,038 | ||
| C8507-47300 | IN STOCK SHIP TODAY |
| 55 | |||
| LFTC-850+ | Mini-Circuits | IN STOCK SHIP TODAY RoHS : Compliant | 50 | |||
| XPC850CT50BU | Motorola Semiconductor Products | IN STOCK SHIP TODAY |
| 18 | ||
| PPC850SEZT50 | Motorola Semiconductor Products | IN STOCK SHIP TODAY | 6 | |||
| C8507-47300 | Hewlett Packard Co | IN STOCK SHIP TODAY |
| 5 | ||
| XPC850DEVR50BU | Freescale Semiconductor | IN STOCK SHIP TODAY RoHS : Compliant |
| 3 | ||
| XPC850ZT50B | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant | 3 | |||
| XPC850SEZT50 | Motorola Semiconductor Products | IN STOCK SHIP TODAY | 3 | |||
| MPC850DSLVR50BU | Freescale Semiconductor | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| KXPC850SEZT50 | Motorola Semiconductor Products | IN STOCK SHIP TODAY |
| 2 | ||
| XPC850ZT50BU | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant | 1 | |||
 EBV Elektronik | BC850BWH6327XTSA1 | Infineon Technologies AG | Trans GP BJT NPN 45V 01A 3Pin SOT323 TR (Alt: SP000747416) RoHS : Compliant | 54,000 | ||
| BC850BE6327HTSA1 | Infineon Technologies AG | Trans GP BJT NPN 45V 01A 3Pin SOT23 TR (Alt: SP000010572) RoHS : Compliant | 3,000 | |||
| BC850CWH6327XTSA1 | Infineon Technologies AG | Trans GP BJT NPN 45V 01A 3Pin SOT323 TR (Alt: SP000747418) RoHS : Compliant | 3,000 | |||
| TC850CPL | Microchip Technology Inc | Analog to Digital Converter 15 bit MultiSlope 40 SPS Differential Parallel 5 V 40 Pins (Alt: TC850CPL) RoHS : Compliant | 0 | |||
| VSC8502XML | Microchip Technology Inc | PHY 2CH 1000Mbps 135Pin QFN (Alt: VSC8502XML) RoHS : Compliant | 0 | |||
| BC850CLT1G | onsemi | NPN Bipolar Transistor ONSSPCTRNSTVU6M5P (Alt: BC850CLT1G) RoHS : Compliant | 0 | |||
| BC850BLT1G | onsemi | Bipolar BJT Single Transistor NPN 45 V 100 mA 225 mW SOT23 Surface Mount (Alt: BC850BLT1G) RoHS : Compliant | 0 | |||
| BC850BW RFG | Taiwan Semiconductor | Transistor GP BJT NPN 45V 01A 3Pin SOT323 Plastic TR (Alt: BC850BW RFG) RoHS : Compliant | 0 | |||
| VSC8504XKS-05 | Microchip Technology Inc | PHY 4Channel 1Gbps 256Ball BGA Tray (Alt: VSC8504XKS-05) RoHS : Compliant | 0 | |||
| NSVBC850BLT1G | onsemi | NPN Bipolar Transistor SS SOT23 GP XSTR NPN 45V ONSSPCTRNSTVU6M5P (Alt: NSVBC850BLT1G) RoHS : Compliant | 0 | |||
| VSC8504XKS-02 | Microchip Technology Inc | PHY 4Channel 1Gbps 256Ball BGA Tray (Alt: VSC8504XKS-02) RoHS : Compliant | 0 | |||
| VSC8502XML-03 | Microchip Technology Inc | (Alt: VSC8502XML-03) RoHS : Compliant | 0 | |||
| VSC8501XML-03 | Microchip Technology Inc | PHY 1CH 135Pin QFN (Alt: VSC8501XML-03) RoHS : Compliant | 0 | |||
| BC850CE6327HTSA1 | Infineon Technologies AG | Trans GP BJT NPN 45V 01A 3Pin SOT23 TR (Alt: SP000010563) RoHS : Compliant | 0 | |||
 Flip Electronics | BC850BLT1G | onsemi | Stock RoHS : Compliant | 489,000 | ||
| NSVBC850BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 369,000 | |||
| NSVBC850CLT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,944 | ||
| MPC850VR50BU | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 591 | |||
| MPC850SRVR80BU | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 120 | |||
| MPC850CVR50BU | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 60 | ||
 Maritex | BC850C | Guangdong Hottech Industrrial Co | Transistor: NPN; bipolar; 45V; 0.1A; 300mW; -55+150 deg.C; SMD; SOT23 |
| 3,317 | |
| APC-8-500 | Mean Well | Power Supply; LED; 8W; 8-16V; 500mA; 90-264VAC; 127-370VDC; IP42 RoHS : Compliant |
| 93 | ||
| BC850C | Diotec Semiconductor AG | Transistor: NPN; bipolar; 45V; 0.1A; 250mW; -55+150 deg.C; SMD; SOT23 RoHS : Compliant |
| 11 | ||
 Master Electronics | 224PHC850K | Illinois Capacitor Inc | Metalized Polypropylene Film Capacitor - 0.22uF ±10% - 850WVDC - +100°C RoHS : Compliant |
| 2,178 | |
| APC-8-500 | Mean Well | AC/DC LED Power Supply - Const Curr - 8W - Fixed: 16 Vdc (OC) @ 500mA - Dim: No RoHS : Compliant |
| 269 | ||
| C850X1100YML | Panduit Corp | Laser/ink jet component label 8.50 W x 11.0 H polyester silver 25 pc. package quantity. RoHS : Compliant |
| 25 | ||
| JDC-850-019-V000 | Mencom Corporation | The JDC-850-019-V000 is an 8-port 5-pin M12 field-wireable junction block designed for industrial signal and power distribution. RoHS : Compliant |
| 4 | ||
| AFC8503 | Panasonic Electronic Components | Interface - Cable Assembly - Panasonic FP Series - 9.84' (3.00m) RoHS : Compliant |
| 1 | ||
| JDC-850-019-C050 | Mencom Corporation | JDC Junction Blocks - 5 Pin - 8 Port - No Led - 5 Meters of Home Run Cable RoHS : Compliant |
| 0 | ||
| TC850ILW | Microchip Technology Inc | 16 BIT HI SPEED A/D RoHS : Compliant |
| 0 | ||
| SCS2525N50480850C850FQ | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| BC850B-AQ | Diotec Semiconductor AG | BJT - SOT-23 - 45V - 100mA - NPN - 0.25W - 150°C - AEC-Q101 RoHS : Compliant |
| 0 | ||
| C85074-000 | TE Connectivity | 55PC4224-24-6/9-92 MOQ Reduction RoHS : Compliant |
| 0 | ||
| TC850CPL | Microchip Technology Inc | Single Channel ADC - Multi-Slope - 40sps - 15-bit+Sign Parallel - 40-Pin PDIP - Tube RoHS : Compliant |
| 0 | ||
| TC850CLW713 | Microchip Technology Inc | 16 BIT HI SPEED A/D RoHS : Compliant |
| 0 | ||
| C85041-000 | TE Connectivity | TX40SJ90-1610 MOQ Reduction RoHS : Compliant |
| 0 | ||
| VSC8504XKS-02 | Microchip Technology Inc | Quad Port QSGMII Dual Media PHY with EEE Support - 1 Circuit - 1V Supply - 256-PBGA (17x17) - Surface Mount. RoHS : Compliant |
| 0 | ||
| EC8508-000 | TE Connectivity | HX095YW2NF044B MOQ Reduction RoHS : Compliant |
| 0 | ||
 Neutron USA | EC850LCD | CyberPower | CyberPower EC850LCD Ecologic 850VA/510W Energy Efficient LCD Desktop ECO UPS |
| 588 | |
| C850-2G3R-54 | Bel Power Solutions | Modular Connectors / Ethernet Connectors RJ45 Connector |
| 50 | ||
| WLB32ZC850PBQMB | Banner Engineering Corp | Industrial LED Light Bar; 3 ft (850mm); Hi/Low/Off Switch; AC; 6 ft Power Cord; IP50 |
| 42 | ||
| MAQDC-850 | Banner Engineering Corp | Cordset, Str M12 F 8p to cut end, 15m, Black PVC Jacket, 72511 |
| 22 | ||
| WLB32ZC850EPBQMB | Banner Engineering Corp | Work Light Bar;Switched Hi/Low/Off;850mm;85-264VAC;IP50;White;Cascadable |
| 19 | ||
| WLB32ZC850PBQM | Banner Engineering Corp | Light Bar, LED, L: 850mm, 2250 Lumens, 85-264VAC, Switched, white Cascadable, QD, 87491 |
| 14 | ||
| WLB32C850EPBQ | Banner Engineering Corp | Work Light Bar;Switched Hi/Low/Off;850mm;12-30VDC;IP40;White;Cascadable |
| 13 | ||
| WLB32ZC850EPBQM | Banner Engineering Corp | LED Light Bars & Light Strips WLB32 Work Light Bar; Switched Hi/Low/Off; Length: 850 mm; Voltage: 90-264 V ac; Environmental Rating: IP50; Color: White; Cascadable; Eye Shield; QD - No Power cord; Diffuse window |
| 9 | ||
| WLB32ZC850QM | Banner Engineering Corp | Work Light Bar;Switchless;850mm;90-264VAC;White;Cascadable; QD, 96004 |
| 6 | ||
| AFC8503 | Panasonic Electronic Components | PLC Programming Cable Round D-Sub, 9-Pin, L-Shaped Type, FP Series |
| 5 | ||
| WLB32C850Q | Banner Engineering Corp | Work Light Bar;No Switch;850mm;12-30VDC;IP50;White;Cascadable;Euro 4-pin |
| 3 | ||
| WLB32C850PB | Banner Engineering Corp | LED Light Bar; White; 2250 Lumens; 12-30VDC; L: 850mm; 2m cable; 87487 |
| 0 | ||
| WLB32C850PBQ, 87483 | Banner Engineering Corp | Industrial Light Bars & Light Strips WLB32 Work Light Bar; Switched Hi/Low/Off; Length: 850 mm; Voltage: 12-30 V dc; Environmental Rating: IP50; Color: White; Cascadable; 4-pin M12 Integral QD; Diffuse Window |
| 0 | ||
| WLB32C850MQ | Banner Engineering Corp | Work Light Bar;Motion Sensor;850mm;12-30VDC;White;Cascadable, QDM12, 97315 |
| 0 | ||
| WLB32ZC850QMB | Banner Engineering Corp | Wlb32 Work Light Bar, Switchless, Length, 850 mm |
| 0 | ||
 Pasternack Enterprises US | PE3C8509 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and type N bulkhead cable connection on the other. Our low PIM type N to N type cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C8509, can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3C8509 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509 can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. Low PIM type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts. | 468 | ||
| PE3C8509/WP | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 N Male (Plug) to N Female (Jack) Bulkhead Low Loss Cable Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) bulkhead low loss cable using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8509/WP can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8509/WP RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8509/WP is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8509/WP can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. | 208 | |||
| PE3C8509-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 60 inch., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 60 inch from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 60 inch, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our low PIM N type to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C8509-60, can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C8509-60 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-60 can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 60 inch. |
| 52 | ||
| PE3C8509-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 36 inch., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 36 inch from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 36 inch, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and N type bulkhead cable connection on the other. Our low PIM type N to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C8509-36, can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C8509-36 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-36 can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 36 inch. |
| 52 | ||
| PE3C8509-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 50 CM., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 50 CM from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 50 CM, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and N type bulkhead cable connection on the other. Our low PIM type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3C8509-50CM, can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C8509-50CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-50CM can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 50 CM. |
| 52 | ||
| PE3C8509/WP-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Bulkhead Low Loss Cable 36 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) bulkhead low loss cable 36 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8509/WP-36 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8509/WP-36 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8509/WP-36 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8509/WP-36 can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 52 | ||
| PE3C8509-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 24 inch., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 24 inch from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 24 inch, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and N type bulkhead cable connection on the other. Our low PIM type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C8509-24, can also be known as a low PIM N type plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3C8509-24 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-24 can also be used in the other direction and will be N type female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM N type plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 24 inch. |
| 52 | ||
| PE3C8509-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 150 CM., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 150 CM from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 150 CM, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our low PIM N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3C8509-150CM, can also be known as a low PIM type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3C8509-150CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-150CM can also be used in the other direction and will be N type female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 150 CM. |
| 52 | ||
| PE3C8509/WP-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 19.685 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Bulkhead Low Loss Cable 50 CM Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) bulkhead low loss cable 50 cm length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8509/WP-50CM can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8509/WP-50CM RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8509/WP-50CM is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8509/WP-50CM can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 52 | ||
| PE3C8501-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 100 CM Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-100CM, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-100CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-100CM can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
| PE3C8501-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 150 CM Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-150CM, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-150CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-150CM can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
| PE3C8501-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 12 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 12 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-12, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-12 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-12 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
| PE3C8501-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 50 CM Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 50 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 50 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-50CM, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-50CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-50CM can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 50 cm length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
| PE3C8501-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 36 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 36 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 36 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 36 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-36, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-36 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-36 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 36 inch length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
| PE3C8501-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 24 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 24 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 24 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 24 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-24, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-24 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-24 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 24 inch length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
 Vyrian | EV1HMC8500PM5 | Analog Devices Inc | RoHS : Compliant | 12,087 | ||
| TMS370C850FNL | Texas Instruments | Microcontroller, 8-Bit, EEPROM, TMS370 CPU, 5MHz, CMOS, PQCC68 RoHS : Not Compliant | 9,604 | |||
| BC850CW/T3 | Nexperia | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant | 9,358 | |||
| BC850BW | Nexperia | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant | 8,308 | |||
| MPC850CZQ50BU | NXP Semiconductors | RISC Microprocessor, 32-Bit, 50MHz, CMOS, PBGA256 RoHS : Not Compliant | 8,220 | |||
| HMC8500LP5DE | Analog Devices Inc | Wide Band High Power Amplifier RoHS : Not Compliant | 7,625 | |||
| BC850CWE6327HTSA1 | Infineon Technologies AG | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon | 6,859 | |||
| TC850CPL | Microchip Technology Inc | ADC, Multi-Slope, 15-Bit, 1 Func, 1 Channel, Parallel, 8 Bits Access, CMOS, PDIP40 RoHS : Compliant | 6,483 | |||
| TMS370C850FNA | Texas Instruments | Microcontroller, 8-Bit, EEPROM, TMS370 CPU, 5MHz, CMOS, PQCC68 RoHS : Not Compliant | 6,226 | |||
| BC850BWE6327HTSA1 | Infineon Technologies AG | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon | 5,965 | |||
| MPC850CZQ50BUR2 | NXP Semiconductors | RISC Microprocessor, 32-Bit, 50MHz, CMOS, PBGA256 RoHS : Not Compliant | 5,962 | |||
| DC850A | Analog Devices Inc | 5,720 | ||||
| HMC8500LP5DETR | Analog Devices Inc | Wide Band High Power Amplifier | 5,280 | |||
| TMX370C850FNS | Texas Instruments | Microcontroller, 8-Bit, EEPROM, TMS370 CPU, 5MHz, CMOS, PQCC68 RoHS : Not Compliant | 3,498 | |||
| BC850BE6327HTSA1 | Infineon Technologies AG | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant | 200 | |||
 Win Source Electronics | BC850C | Diotec Semiconductor AG | NPN general purpose transistors RoHS : Compliant |
| 394,000 | |
| BC850CLT1 | onsemi | TRANS NPN 45V 0.1A SOT23 RoHS : Not Compliant |
| 358,110 | ||
| BC850CLT1G | onsemi | TRANS NPN 45V 0.1A SOT23 RoHS : Compliant |
| 267,000 | ||
| BC850B | Diotec Electronics Corp | TRANS NPN 45V 0.1A SOT23-3 |
| 162,000 | ||
| BC850CW | Taiwan Semiconductor | SOT-323, 50V, 0.1A, NPN BIPOLAR / Bipolar (BJT) Transistor NPN 45 V 100 mA 100MHz 200 mW Surface Mount SOT-323 |
| 61,000 | ||
| VSC8502XML-03 | Microchip Technology Inc | IC TELECOM INTERFACE 135QFN / Telecom IC Ethernet 135-QFN (12x12) RoHS : Compliant |
| 5,472 | ||
| VSC8502XML | Microchip Technology Inc | IC TELECOM INTERFACE 135QFN RoHS : Compliant |
| 4,900 | ||
| VSC8504XKS-05 | Microchip Technology Inc | IC TELECOM INTERFACE 256BGA / Telecom IC Ethernet 256-PBGA (17x17) RoHS : Compliant |
| 990 | ||
| MPC850DSLVR50BU | Freescale Semiconductor | IC MPU MPC8XX 50MHZ 256BGA RoHS : Compliant |
| 153 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
German ▼ 
English
Chinese
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand