Datenblatt-Suchmaschine für elektronische Bauteile
  German  ▼
ALLDATASHEETDE.COM

X  



C9900-R231 Verteiler
VerteilerTeilenummerHerstellerBauteilbeschribungPriceQty.
BuyNow

TME		EC9901-000

 TE Connectivity Marker: cable-heat shrinkable; 25mm; white; Shrinking ratio: 2: 1
RoHS : Compliant
1,000 : $1.68
2,000
CPC9909NE

 IXYS Corporation IC: driver; AC/DC switcher,DC/DC switcher,LED driver; SO8-EP
RoHS : Compliant
500 : $1.38
200 : $1.44
100 : $1.49
50 : $1.54
25 : $1.63
15 : $1.72
10 : $1.8
1 : $2.39
1,016
CPC9909N

 IXYS Corporation IC: driver; AC/DC switcher,DC/DC switcher,LED driver; SO8; 2mA
RoHS : Compliant
50 : $1.37
25 : $1.41
10 : $1.62
5 : $1.81
1 : $2.11
685
C99073-000

 TE Connectivity PIN: 2
RoHS : Compliant
1 : $1,293.54
1
CPC9909NTR

 IXYS Corporation IC: driver; AC/DC switcher,DC/DC switcher,LED driver; SO8
RoHS : Compliant
2,000 : $1.4
0
LTST-C990TBKT

 Lite-On Semiconductor Corporation LED; blue; SMD; 560÷1400mcd; 75°; 20mA; 525nm; Lens: transparent
RoHS : Compliant
15,000 : $0.115
0
CPC9909NETR

 IXYS Corporation IC: driver; AC/DC switcher,DC/DC switcher,LED driver; SO8-EP
RoHS : Compliant
2,000 : $1.39
0
EVC990

 ifm efector inc Cable: for sensors; automatics
5 : $36.06
1 : $37.5
0
LTST-C990KRKT

 Lite-On Semiconductor Corporation LED; red; SMD; 0603; 180÷1120mcd; 75°; 25mA; Lens: transparent
RoHS : Compliant
15,000 : $0.072
0
LTST-C990TGKT

 Lite-On Semiconductor Corporation LED; green; SMD; 0603; 75°; 525nm; round; No.of diodes: 1
RoHS : Compliant
15,000 : $0.134
0
CC990

 TESTEC Elektronik GmbH Probe: for oscilloscope; current; 1.5MHz; 600V; 0.23us; BNC plug
3 : $1,211.87
1 : $1,301.64
0

Avnet Americas		RN55C9903FRE5

 Vishay Intertechnologies - Tape and Reel (Alt: RN55C9903FRE5)
RoHS : Not Compliant
40,000 : $0.15086
20,000 : $0.15255
10,000 : $0.15481
5,000 : $0.15707
1,000 : $0.22983
0
RN55C9903FRE6

 Vishay Intertechnologies - Tape and Reel (Alt: RN55C9903FRE6)
RoHS : Not Compliant
40,000 : $0.28123
20,000 : $0.28267
10,000 : $0.28411
5,000 : $0.28556
1,000 : $0.28844
0
TAZG335K050CBLC9900

 Kyocera AVX Components CWR09/CWR11/CWR29 - Bulk (Alt: TAZG335K050CBLC9900)
RoHS : Compliant
0
RN60C9900FB14

 Vishay Intertechnologies Through Hole Resistor, 990 ohm, RN Series, 125 mW, ? 1%, Axial Leaded, 300 V, Metal Film, ? 50ppm/?C - Bulk (Alt: RN60C9900FB14)
RoHS : Not Compliant
40,000 : $0.30406
20,000 : $0.30562
10,000 : $0.30718
5,000 : $0.30874
1,000 : $0.31186
0
TAZF685K020CBLC9900

 Kyocera AVX Components CWR09/CWR11/CWR29 - Bulk (Alt: TAZF685K020CBLC9900)
RoHS : Compliant
0
LTE-C9904-P

 Lite-On Semiconductor Corporation - Tape and Reel (Alt: LTE-C9904-P)
RoHS : Compliant
4,416,000 : $0.08464
2,208,000 : $0.08622
1,104,000 : $0.09003
552,000 : $0.09383
276,000 : $0.09764
0
LTST-C990TBKT

 Lite-On Semiconductor Corporation CHIP LED DOME LENS GREEN 525NM, SUPER BRIGHTNESS - Tape and Reel (Alt: LTST-C990TBKT)
RoHS : Compliant
240,000 : $0.09983
120,000 : $0.1023
60,000 : $0.10478
30,000 : $0.10725
15,000 : $0.10973
0
B43416C9907A

 TDK Corporation Aluminum Electrolytic Capacitor with Snap-In Terminals 900uF 400V -10% to 20% 2-Pin Through Hole Cardboard - Bulk (Alt: B43416C9907A000)
RoHS : Compliant
9,600 : $12.08015
4,800 : $12.30637
2,400 : $12.8493
1,200 : $13.39222
240 : $16.72255
0
RN55C9901BRE7

 Vishay Intertechnologies - Tape and Reel (Alt: RN55C9901BRE7)
RoHS : Not Compliant
48,000 : $0.40317
24,000 : $0.4077
12,000 : $0.41374
6,000 : $0.41978
1,500 : $0.55554
0
RN55C9903FRE7

 Vishay Intertechnologies - Tape and Reel (Alt: RN55C9903FRE7)
RoHS : Not Compliant
48,000 : $0.15086
24,000 : $0.15255
12,000 : $0.15481
6,000 : $0.15707
1,500 : $0.22983
0
LTST-C990KRKT

 Lite-On Semiconductor Corporation CHIP LED DOME LENS RED - Tape and Reel (Alt: LTST-C990KRKT)
RoHS : Compliant
240,000 : $0.06219
120,000 : $0.06374
60,000 : $0.06528
30,000 : $0.06682
15,000 : $0.06836
0
LTE-C9906-Q

 Lite-On Semiconductor Corporation - Tape and Reel (Alt: LTE-C9906-Q)
RoHS : Compliant
8,832,000 : $0.08037
4,416,000 : $0.08187
2,208,000 : $0.08548
1,104,000 : $0.0891
552,000 : $0.09271
0
RN55C9901BRE6

 Vishay Intertechnologies Through Hole Resistor, 9.9 kohm, RN Series, 100 mW, ? 0.1%, Axial Leaded, 200 V, Metal Film - Tape and Reel (Alt: RN55C9901BRE6)
RoHS : Not Compliant
40,000 : $0.61772
20,000 : $0.62089
10,000 : $0.62406
5,000 : $0.62722
1,000 : $0.63356
0
LTE-C9906

 Lite-On Semiconductor Corporation - Tape and Reel (Alt: LTE-C9906)
RoHS : Compliant
8,832,000 : $0.07262
4,416,000 : $0.07398
2,208,000 : $0.07725
1,104,000 : $0.08051
552,000 : $0.08378
0
TAZH336K015CBLC9900

 Kyocera AVX Components CWR09/CWR11/CWR29 - Bulk (Alt: TAZH336K015CBLC9900)
RoHS : Compliant
0

Newark		BTNKSC990

 C&K Switches Cap Black Ksc9 Series; |C&k Components BTNKSC990
RoHS : Compliant
10 : $0.455
100 : $0.418
250 : $0.41
500 : $0.4
1,000 : $0.381
2,500 : $0.36
5,000 : $0.353
6,640
CPC9909NETR

 Littelfuse Inc Led Driver, Dc/Dc, Buck, Boost, 120Khz; |Littelfuse CPC9909NETR
RoHS : Compliant
1 : $2.1
50 : $1.43
100 : $1.28
250 : $1.21
500 : $1.17
1,000 : $1.15
2,500 : $1.12
5,000 : $1.1
2,000
CPC9909NETR

 Littelfuse Inc Led Driver, Dc/Dc, Buck, Boost, 120Khz; |Littelfuse CPC9909NETR
RoHS : Compliant
1 : $2.1
50 : $1.43
100 : $1.28
250 : $1.21
500 : $1.17
1,000 : $1.15
2,500 : $1.12
5,000 : $1.1
2,000
CPC9909NE

 Littelfuse Inc Led Driver, Boost/Buck, 120Khz, Soic-8Ep; |Littelfuse CPC9909NE
RoHS : Compliant
1 : $2.59
10 : $1.92
25 : $1.76
50 : $1.67
100 : $1.58
250 : $1.51
500 : $1.44
898
EC-9904-BT

 BUD Industries Inc Case 19", 6.0, Steel, Portable; |Bud Industries EC-9904-BT
RoHS : Compliant
1 : $268.84
5 : $261.84
10 : $256.28
5
EC-9906-BT

 BUD Industries Inc 19" Case, Cabinet, Black, 8U, Steel; |Bud Industries EC-9906-BT
RoHS : Compliant
1 : $317.32001
5 : $310.97
10 : $304.63
2
EC-9905-BT

 BUD Industries Inc 19" Case, Cabinet, Black, 7U, Steel; |Bud Industries EC-9905-BT
RoHS : Compliant
1 : $308.07999
5 : $301.92001
10 : $295.76001
2
EC-9902-S

 BUD Industries Inc 19" Case, Cabinet, Sand, 4U, Steel; |Bud Industries EC-9902-S
RoHS : Compliant
1 : $280.04999
5 : $274.45001
10 : $268.85001
1
EC-9902-BT

 BUD Industries Inc 19" Case, Cabinet, Black, 4U, Steel; |Bud Industries EC-9902-BT
RoHS : Compliant
1 : $280.04999
5 : $274.45001
10 : $268.85001
1
C-990

 General Devices Cable Carrier, Steel, Clear; |General Devices C-990
RoHS : Compliant
18 : $125.93
0
CPC9909N

 Littelfuse Inc Off-Line High Brightness Led Driver/ Tub; |Littelfuse CPC9909N
RoHS : Not Compliant
1,000 : $1.38
2,000 : $1.35
3,000 : $1.32
5,000 : $1.3
10,000 : $1.27
25,000 : $1.24
50,000 : $1.21
100,000 : $1.19
0
BTNKSC990

 C&K Switches Cap Black Ksc9 Series; |C&k Components BTNKSC990
RoHS : Not Compliant
10,000 : $0.685
20,000 : $0.639
0
EC9901-000

 TE Connectivity Wire Labels & Markers Zhd-Sce-1K-9.5-50-; |Te Connectivity Raychem EC9901-000
RoHS : Not Compliant
1,000 : $1.64
0
PA411C9900

 E-Switch Inc Ea; |E-Switch PA411C9900
RoHS : Compliant
5,000 : $1.49
0
RLR07C9900FSB14

 Vishay Intertechnologies Res, Vishay Rlr07C9900Fsb14; |Vishay RLR07C9900FSB14
RoHS : Not Compliant
1,000 : $2.65
2,000 : $2.6
3,000 : $2.54
5,000 : $2.49
10,000 : $2.44
25,000 : $2.39
50,000 : $2.33
100,000 : $2.28
0

RS		EC-9906-BT

 BUD Industries Inc RACK, CABINET,19 IN,8U/14 IN,14.5 IN DEPTH, BLACK,500LB WT-CAP, CLASSIC II SERIES
1 : $410.17
1
EC-9904-BT

 BUD Industries Inc RACK, CABINET,19 IN,6U/10.5 IN,14.5 IN DEPTH, BLACK,500LB WT-CAP, CLASSIC II SERIES
RoHS : Compliant
1 : $343.92
1
EC-9902-BT

 BUD Industries Inc RACK, CABINET,19 IN,4U/7 IN,14.5 IN DEPTH, BLACK,500LB WT-CAP, CLASSIC II SERIES
1 : $329.11
1
C99013

 Norgren POPPET SPECIAL, 1/2 NPT
1 : $843.7
0
VC9903

 ABB Group PINT SIZE CLEAR PRIMER WITH DAUBER APPLICATOR
1 : $13.68
0
CPC9909N

 Littelfuse Inc OFF-LINE HIGH BRIGHTNESS LED DRIVER
RoHS : Compliant
100 : $2.07
0
EC-9906-S

 BUD Industries Inc RACK, CABINET,19 IN,8U/14 IN,14.5 IN DEPTH, SAND,500LB WT-CAP, CLASSIC II SERIES
1 : $372.88
0
EC-9905-S

 BUD Industries Inc RACK, CABINET,19 IN,7U/12.25 IN,14.5 IN DEPTH, SAND,500LB WT-CAP, CLASSIC II SERIES
1 : $362.02
0
EC-9904-S

 BUD Industries Inc RACK, CABINET,19 IN,6U/10.5 IN,14.5 IN DEPTH, SAND,500LB WT-CAP, CLASSIC II SERIES
1 : $343.92
0
EC9900-000

 TE Connectivity RAYCHEM;WIRE IDENTIFICATION 9.5MM DIA 50MM LENGTH WHITE;EC9900-000
RoHS : Compliant
2,000 : $2.06
50,000 : $1.94
100,000 : $1.86
0
EC9901-000

 TE Connectivity THERMOFIT, PRINTABLE LOW FIRE HAZARD,2:1,WHITE,0.375,ZHD-SCE-1K-9.5-50-S1-9
RoHS : Compliant
2,000 : $1.91
4,000 : $1.83
8,000 : $1.78
0
EC9903-000

 TE Connectivity RAYCHEM;WIRE IDENTIFICATION 12.7MM DIA 1PRESCORE 50MM LENGTH WHITE;EC9903-000
RoHS : Compliant
2,000 : $2.82
50,000 : $2.65
100,000 : $2.57
0
CPC9909NTR

 Littelfuse Inc OFF-LINE HIGH BRIGHTNESS LED DRIVER REEL
RoHS : Compliant
2,000 : $1.97
50,000 : $1.88
100,000 : $1.82
0
EC-9903-BT

 BUD Industries Inc RACK, CABINET,19 IN,5U/8.75 IN,14.5 IN DEPTH, BLACK,500LB WT-CAP, CLASSIC II SERIES
1 : $335.28
0
R3G310-FC99-01

 ebm-papst DC CENTRIFUGAL FAN, BACKWARD-CURVED,318X165X318MM,1530 CFM,24V, IP44,1650 RPM,105
10 : $780.59
0

Microchip Technology Inc		GC9904-UC

 Microchip Technology Inc Si Schottky Non Hermetic Chip, Projected EOL: 2046-08-15 - Contact for Pricing
RoHS : Compliant
0
GC9902-UC

 Microchip Technology Inc Si Schottky Non Hermetic Chip, Projected EOL: 2046-08-15 - Contact for Pricing
RoHS : Compliant
0
GC9901-00

 Microchip Technology Inc Si Schottky Non Hermetic Chip, Projected EOL: 2046-08-15 - Contact for Pricing
0
GC9900-00

 Microchip Technology Inc Si Schottky Non Hermetic Chip, Projected EOL: 2046-08-15 - Contact for Pricing
0
GC9902-S12

 Microchip Technology Inc Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing
RoHS : Compliant
0
GC9904-S12

 Microchip Technology Inc Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing
RoHS : Compliant
0
GC9903-QB1

 Microchip Technology Inc Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15
RoHS : Compliant
1,000 : $16.09
500 : $16.4
250 : $17.05
100 : $17.87
50 : $18.97
1 : $19.79
0
GC9901-TSR

 Microchip Technology Inc Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing
RoHS : Compliant
0
GC9901-QR1

 Microchip Technology Inc Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing
RoHS : Compliant
0
GC9901-S12

 Microchip Technology Inc Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15
RoHS : Compliant
1,000 : $12.46
500 : $12.72
250 : $13.23
100 : $13.84
50 : $14.71
1 : $15.34
0
GC9902-TSR

 Microchip Technology Inc Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing
RoHS : Compliant
0
GC9901-127C

 Microchip Technology Inc Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing
RoHS : Not Compliant
0
GC9902-127B-TSR

 Microchip Technology Inc Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing
RoHS : Compliant
0
GC9901-174C-QR1

 Microchip Technology Inc Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing
RoHS : Compliant
0
GC9902-174C-QR1

 Microchip Technology Inc Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing
RoHS : Compliant
0

Sager		EC9900-000

 TE Connectivity Wire Labels & Markers ZHD-SCE-1K-9.5-50-9
RoHS : Compliant
0
EC9901-000

 TE Connectivity Wire Labels & Markers ZHD-SCE-1K-9.5-50-S1-9
RoHS : Compliant
0
060-C990-04

 HONEYWELL TEST AND MEASUREMENT Industrial Pressure Sensors
0
BTNKSC990

 C&K Switches Switch Actuators Button for KSC9 Black, 15.4mm
0
C-990

 General Devices Racks & Rack Cabinet Accessories
1 : $156.4
10 : $136.85
25 : $118.45
50 : $98.9
100 : $93.15
0
EC-9906-BT

 BUD Industries Inc COMMUNICATIONS CABINET BLACK (16.1 X 21.1 X 15.5 IN)
1 : $363.0
10 : $333.0
25 : $318.0
50 : $302.0
100 : $288.57
0
EC-9904-BT

 BUD Industries Inc COMMUNICATIONS CABINET BLACK (12.6 X 21.1 X 15.5 IN)
RoHS : Compliant
1 : $334.0
10 : $307.0
25 : $293.0
50 : $278.0
100 : $266.16
0
EC9903-000

 TE Connectivity Wire Labels & Markers ZHD-SCE-1K-12.7-50-S1-9
RoHS : Compliant
0
C9904

 TE Connectivity TE Connectivity
0
EC-9906-S

 BUD Industries Inc COMMUNICATIONS CABINET SAND (16.1 X 21.1 X 15.5 IN)
1 : $363.0
10 : $333.0
25 : $318.0
50 : $302.0
100 : $288.57
0
EC-9902-BT

 BUD Industries Inc COMMUNICATIONS CABINET BLACK (9.1 X 21.1 X 15.5 IN)
1 : $320.0
10 : $294.0
25 : $280.0
50 : $266.0
100 : $254.7
0
EC-9905-S

 BUD Industries Inc COMMUNICATIONS CABINET SAND (14.3 X 21.1 X 15.5 IN)
1 : $352.0
10 : $323.0
25 : $308.0
50 : $293.0
100 : $280.16
0
EC-9905-BT

 BUD Industries Inc COMMUNICATIONS CABINET BLACK (14.3 X 21.1 X 15.5 IN)
1 : $352.0
10 : $323.0
25 : $308.0
50 : $293.0
100 : $280.16
0
EC9908-000

 TE Connectivity Wire Labels & Markers ZHD-SCE-5K-2.4-50-9
RoHS : Compliant
0
EC-9904-S

 BUD Industries Inc COMMUNICATIONS CABINET SAND (12.6 X 21.1 X 15.5 IN)
1 : $334.0
10 : $307.0
25 : $293.0
50 : $278.0
100 : $266.16
0

Interstate Connecting Components		10C9900973

 Brady Worldwide Inc 0468-0113-0000,REV.00
1 : $0.0324
5,000 : $0.0324
1,250
EC9903-000

 TE Connectivity ZHD-SCE-1K-12.7-50-S1-9
RoHS : Compliant
0
EC9907-000

 TE Connectivity ZHD-SCE-1K-25.4-50-S1-9
RoHS : Compliant
0
EC9905-000

 TE Connectivity ZHD-SCE-1K-19.0-50-S1-9
RoHS : Compliant
0

Chip 1 Exchange		CPC9909NE

 INSTOCK
1,955
MC990001A09

 INSTOCK
1

Avnet Abacus		C99073-000

 TE Connectivity (Alt: C99073-000)
RoHS : Compliant
0

Braemac Americas-Symmetry		33-HC990EXF-35-00-0190

 Calian
1 : $284.45
0
33-HC990XF-28

 Calian HC990XF Extended-Filter Full-Band GNSS Low-Profile Helical Antenna + L-Band, 28dB
1 : $349.87
0
33-HC990EXF-35-00-1500

 Calian HC990EXF Extended-Filter Embedded Full GNSS Helical Antenna + L-Band, 35dB, SMA straight male connector, 1500mm cable
1 : $284.45
0
33-HC990EXF-35-05-0361

 Calian
1 : $284.45
0
HC990EXF-35-05-0361

 Calian Embedded, Full GNSS Spectrum + L-band with eXtended Filtering, 35dB active gain, MCX R/A Male/Plug, 361mm cable length
1 : $284.45
0
33-HC990EXF-35-00-0150

 Calian Internal p/n 110-0342-A
1 : $284.45
0
33-HC990EXF-28-00-1500

 Calian HC990EXF Extended-Filter Embedded Full GNSS Helical Antenna + L-Band, 28dB, SMA straight male connector, 1500mm cable
1 : $284.45
0

Chip-Germany GmbH		C9900-A323 PCI-BUS

 Beckhoff Automation GmbH
2
C9900-K115 TYP BNC/BELDE

 Beckhoff Automation GmbH
2
C9900-K435 128079

 Beckhoff Automation GmbH
1
C9900-K535 129179

 Becmer
1

Master Electronics		CPC9909NE

 Littelfuse Inc Led Driver Boost/Buck 120Khz Soic-8Ep Rohs Compliant: Yes |Littelfuse CPC9909NE
RoHS : Compliant
10,000 : $0.948
7,500 : $0.957
5,000 : $0.97
2,500 : $0.992
1,000 : $1.022
500 : $1.044
300 : $1.061
100 : $1.096
1,500
10C9900750

 Brady Worldwide Inc
RoHS : Compliant
2,500 : $0.87
1,000 : $1.26
500 : $1.45
250 : $1.73
100 : $2.08
50 : $2.39
25 : $2.67
10 : $2.83
746
EC-9903-BT

 BUD Industries Inc Cabinet Rack - Doorless - Non-Vented - 5U - 15.500 L x 21.060 W x 10.810 H (393.70mm x 534.92mm x 284.57mm) Overall Dimensions - Steel - Black Textured.
RoHS : Compliant
20 : $230.97
10 : $233.37
5 : $233.95
3 : $235.5
1 : $238.74
1
GC9902-S12

 Microchip Technology Inc
RoHS : Compliant
100 : $13.94
75 : $14.23
50 : $15.25
25 : $20.33
0
GC9904-UC

 Microchip Technology Inc
RoHS : Compliant
200 : $4.42
150 : $4.52
100 : $4.84
50 : $6.45
0
EC9900-000

 TE Connectivity ZHD-SCE-1K-9.5-50-9 MOQ Reduction
RoHS : Compliant
2,000 : $1.31
1,500 : $1.34
1,000 : $1.69
500 : $2.74
0
EC9901-000

 TE Connectivity ZHD-SCE-1K-9.5-50-S1-9
RoHS : Compliant
2,000 : $1.47
1,500 : $1.5
1,000 : $1.9
500 : $3.08
250 : $3.09
100 : $3.1
75 : $3.11
0
BTNKSC990

 C&K Switches Switch Access Tactile Switch Round Button
RoHS : Compliant
50,000 : $0.281
25,000 : $0.2817
10,000 : $0.2824
8,000 : $0.2832
5,000 : $0.2839
0
EC-9904-BT

 BUD Industries Inc Cabinet Rack - Doorless - Non-Vented - 6U - 15.500 L x 21.060 W x 12.560 H (393.70mm x 534.92mm x 319.02mm) Overall Dimensions - Steel - Black Textured.
RoHS : Compliant
20 : $278.73
10 : $285.65
5 : $286.37
3 : $290.35
1 : $298.64
0
EC9903-000

 TE Connectivity ZHD-SCE-1K-12.7-50-S1-9 MOQ Reduction
RoHS : Compliant
2,000 : $1.68
1,500 : $1.71
1,000 : $2.44
500 : $4.6
0
EC9908-000

 TE Connectivity ZHD-SCE-5K-2.4-50-9 MOQ Reduction
RoHS : Compliant
5,000 : $0.734
3,750 : $0.749
2,500 : $1.064
1,250 : $2.011
0
GC9903-QB1

 Microchip Technology Inc Si Schottky Non Hermetic Beam Lead
RoHS : Compliant
32 : $22.08
24 : $22.53
16 : $24.14
8 : $32.18
0
EC9906-000

 TE Connectivity ZHD-SCE-1K-25.4-50-9 MOQ Reduction
RoHS : Compliant
1,000 : $2.79
750 : $2.85
500 : $3.6
250 : $5.85
0
VC9903

 Thomas & Betts CLEAR PRIMER - PINT 31376
RoHS : Compliant
24 : $42.01
18 : $42.87
12 : $45.93
6 : $61.24
0
GC9901-S12

 Microchip Technology Inc Si Schottky Non Hermetic Beam Lead
RoHS : Compliant
50 : $16.87
38 : $17.21
25 : $18.69
13 : $23.96
0

Pasternack Enterprises US		PE3C9905-60

 Pasternack Enterprises Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male Right Angle to TNC Female Bulkhead Low Loss Cable 60 Inch Length Using LMR-195-UF Coax., Radio frequency assembly TNC male right angle to TNC female bulkhead low loss cable 60 inch length using LMR-195-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC female bulkhead low loss cable 60 inch length using LMR-195-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss right angle TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C9905-60 can also be known as a low loss right angle TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9905-60 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our right angle TNC male to bulkhead TNC female cable has a maximum VSWR of 1.35:1. TNC plug to TNC jack cable assembly PE3C9905-60 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9905-60 can also be used in the other direction and will be a TNC female bulkhead to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $132.99
10 : $130.33
25 : $127.67
100 : $125.01
1,901
PE3C9905-12

 Pasternack Enterprises Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male Right Angle to TNC Female Bulkhead Low Loss Cable 12 Inch Length Using LMR-195-UF Coax., Radio frequency assembly TNC male right angle to TNC female bulkhead low loss cable 12 inch length using LMR-195-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC female bulkhead low loss cable 12 inch length using LMR-195-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss right angle TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C9905-12 can also be known as a low loss right angle TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9905-12 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our right angle TNC male to bulkhead TNC female cable has a maximum VSWR of 1.35:1. TNC plug to TNC jack cable assembly PE3C9905-12 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9905-12 can also be used in the other direction and will be a TNC female bulkhead to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $111.99
10 : $109.75
25 : $107.51
100 : $105.27
1,901
PE3C9905-300

 Pasternack Enterprises Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. TNC Male Right Angle to TNC Female Bulkhead Low Loss Cable 300 Inch Length Using LMR-195-UF Coax., Radio frequency assembly TNC male right angle to TNC female bulkhead low loss cable 300 inch length using LMR-195-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC female bulkhead low loss cable 300 inch length using LMR-195-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss right angle TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C9905-300 can also be known as a low loss right angle TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9905-300 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our right angle TNC male to bulkhead TNC female cable has a maximum VSWR of 1.35:1. TNC plug to TNC jack cable assembly PE3C9905-300 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9905-300 can also be used in the other direction and will be a TNC female bulkhead to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $239.99
10 : $235.19
25 : $230.39
100 : $225.59
545
PE3C9904-24

 Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 24 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 24 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9904-24 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9904-24 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9904-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9904-24 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $94.19
25 : $89.48
50 : $84.77
100 : $81.0
41
PE3C9904-48

 Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 48 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 48 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9904-48 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9904-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9904-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9904-48 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $98.49
25 : $93.57
50 : $88.64
100 : $84.7
41
PE3C9904-12

 Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 12 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 12 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9904-12 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9904-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9904-12 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9904-12 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06
41
PE3C9904-60

 Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 60 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 60 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9904-60 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9904-60 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9904-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9904-60 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $100.99
25 : $95.94
50 : $90.89
100 : $86.85
41
PE3C9908/HS-36

 Pasternack Enterprises Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Female Bulkhead to Trimmed Lead Cable 36 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to trimmed lead cable 36 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to trimmed lead cable 36 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a trimmed lead cable connection on the other. Our BNC to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9908/HS-36 can also be known as a BNC jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9908/HS-36 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has a between series connection. BNC jack to trimmed lead sexless cable assembly PE3C9908/HS-36 is built with RG178 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to trimmed lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9908/HS-36 can also be used in the other direction and will be a trimmed lead sexless to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to trimmed lead cable assembly for quick shipment worldwide. Variations of BNC and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to Trimmed Lead RF cable assembly as per your requirements.
1 : $88.89
25 : $84.45
50 : $80.0
100 : $76.45
6
PE3C9908/HS-6

 Pasternack Enterprises Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. BNC Female Bulkhead to Trimmed Lead Cable 6 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to trimmed lead cable 6 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to trimmed lead cable 6 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a trimmed lead cable connection on the other. Our BNC to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9908/HS-6 can also be known as a BNC jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9908/HS-6 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has a between series connection. BNC jack to trimmed lead sexless cable assembly PE3C9908/HS-6 is built with RG178 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to trimmed lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9908/HS-6 can also be used in the other direction and will be a trimmed lead sexless to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to trimmed lead cable assembly for quick shipment worldwide. Variations of BNC and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to Trimmed Lead RF cable assembly as per your requirements.
1 : $82.39
25 : $78.27
50 : $74.15
100 : $70.86
6
PE3C9908/HS-12

 Pasternack Enterprises Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Female Bulkhead to Trimmed Lead Cable 12 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to trimmed lead cable 12 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to trimmed lead cable 12 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a trimmed lead cable connection on the other. Our BNC to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9908/HS-12 can also be known as a BNC jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9908/HS-12 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has a between series connection. BNC jack to trimmed lead sexless cable assembly PE3C9908/HS-12 is built with RG178 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to trimmed lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9908/HS-12 can also be used in the other direction and will be a trimmed lead sexless to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to trimmed lead cable assembly for quick shipment worldwide. Variations of BNC and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to Trimmed Lead RF cable assembly as per your requirements.
1 : $85.59
25 : $81.31
50 : $77.03
100 : $73.61
6
PE3C9908/HS-9

 Pasternack Enterprises Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. BNC Female Bulkhead to Trimmed Lead Cable 9 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to trimmed lead cable 9 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to trimmed lead cable 9 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a trimmed lead cable connection on the other. Our BNC to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9908/HS-9 can also be known as a BNC jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9908/HS-9 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has a between series connection. BNC jack to trimmed lead sexless cable assembly PE3C9908/HS-9 is built with RG178 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to trimmed lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9908/HS-9 can also be used in the other direction and will be a trimmed lead sexless to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to trimmed lead cable assembly for quick shipment worldwide. Variations of BNC and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to Trimmed Lead RF cable assembly as per your requirements.
1 : $85.59
25 : $81.31
50 : $77.03
100 : $73.61
6
PE3C9906/HS

 Pasternack Enterprises
0
PE3C9901/HS

 Pasternack Enterprises
0
PE3C9903

 Pasternack Enterprises
0
PE3C9909

 Pasternack Enterprises
0

Vyrian		HMC990LP4E

 Analog Devices Inc Down Converter
RoHS : Compliant
10,816
GC9902-17SP

 Microchip Technology Inc Mixer Diode, Low Barrier, X Band, Silicon
RoHS : Compliant
2,180

Link URL



War ALLDATASHEET hilfreich?  [ DONATE ]  

Über Alldatasheet   |   Werbung   |   Kontakt   |   Privatsphäre und Datenschutz   |   Link zum Datenblatt    |   Linktausch   |   Hersteller
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com