| Datenblatt-Suchmaschine für elektronische Bauteile |
|
C9900-R257 Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
![]() TME | CBR04C999B5GAC | YAGEO Corporation | Capacitor: ceramic; 9.9pF; 50VDC; C0G (NP0); SMD; 0402; 1x0.5x0.5mm |
| 20,000 | |
| EC9901-000 | TE Connectivity | Marker: cable-heat shrinkable; 25mm; white; Shrinking ratio: 2: 1 RoHS : Compliant |
| 2,000 | ||
CPC9909NE![]() | IXYS Corporation | IC: driver; AC/DC switcher,DC/DC switcher,LED driver; SO8-EP RoHS : Compliant |
| 1,016 | ||
CPC9909N![]() | IXYS Corporation | IC: driver; AC/DC switcher,DC/DC switcher,LED driver; SO8; 2mA RoHS : Compliant |
| 685 | ||
| EVC996 | ifm efector inc | Cable: for sensors; automatics |
| 0 | ||
| EVC997 | ifm efector inc | Cable: for sensors; automatics |
| 0 | ||
| IGC99T120T8RLX1SA3 | Infineon Technologies AG | Transistor: IGBT; Field Stop; 1.2kV RoHS : Compliant |
| 0 | ||
CPC9909NTR![]() | IXYS Corporation | IC: driver; AC/DC switcher,DC/DC switcher,LED driver; SO8 RoHS : Compliant |
| 0 | ||
| EF45101S2-1000U-C99 | SUNON USA | Fan: DC; 45x45x10mm; axial; 12VDC; 16m3/h; 26.1dBA; slide; 3.05mmH2O |
| 0 | ||
| HAC0251S4-1000U-C99 | SUNON USA | Fan: DC; 120x120x25mm; axial; 12VDC; 93.79m3/h; 32.1dBA; slide |
| 0 | ||
| IC991267 | ipf electronic gmbh | Sensor: inductive; OUT: PNP / NO; 1.8mm; 7÷35VDC; M12; 2m; IP67 |
| 0 | ||
| EF80151S2-1000U-C99 | SUNON USA | Fan: DC; 80x80x15mm; axial; 12VDC; 57.1m3/h; 29.9dBA; slide; 24AWG |
| 0 | ||
| LTST-C990TBKT | Lite-On Semiconductor Corporation | LED; blue; SMD; 560÷1400mcd; 75°; 20mA; 525nm; Lens: transparent RoHS : Compliant |
| 0 | ||
| EVC993 | ifm efector inc | Cable: for sensors; automatics |
| 0 | ||
| EVC995 | ifm efector inc | Cable: for sensors; automatics |
| 0 | ||
![]() Avnet Americas | C99 | TE Connectivity | - Bulk (Alt: 7-1437627-4) RoHS : Compliant | 0 | ||
| PPC999LFGR02ZZZ938121 | Intel Corporation | (Alt: PPC999LFGR02ZZZ938121) RoHS : Not Compliant |
| 0 | ||
| PPC999WFGM05ZZZ938234 | Intel Corporation | (Alt: PPC999WFGM05ZZZ938234) RoHS : Not Compliant |
| 0 | ||
| PPC999WFGU05X1Z938226 | Intel Corporation | (Alt: PPC999WFGU05X1Z938226) RoHS : Not Compliant |
| 0 | ||
| ATS-17C-99-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, - Trays (Alt: ATS-17C-99-C2-R0) RoHS : Compliant |
| 0 | ||
| AHC996OSGU01ZZP99DL8C | Intel Corporation | B43544B2188M62 (Alt: AHC996OSGU01ZZP99DL8C) RoHS : Not Compliant |
| 0 | ||
| CWR06JC225KCC/99 | Vishay Intertechnologies | Surface Mount Tantalum Capacitor, 2.2 uF, 20 V, 1510 [3825 Metric], ? 10%, 5 Ohm, D Size Code - Bulk (Alt: CWR06JC225KCC/99) RoHS : Not Compliant |
| 0 | ||
| CWR06KH475KC/99 | Vishay Intertechnologies | - Bulk (Alt: CWR06KH475KC/99) RoHS : Not Compliant |
| 0 | ||
| ATS-12C-99-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, - Trays (Alt: ATS-12C-99-C3-R0) RoHS : Compliant |
| 0 | ||
| MS27479E16C99SA | Amphenol Corporation | - Bulk (Alt: MS27479E16C99SA) RoHS : Not Compliant |
| 0 | ||
| MS27479T10C99PA | Amphenol Corporation | - Bulk (Alt: MS27479T10C99PA) RoHS : Not Compliant |
| 0 | ||
| MS27479T16C99SB | Amphenol Corporation | - Bulk (Alt: MS27479T16C99SB) RoHS : Not Compliant |
| 0 | ||
| MS27481E16C99S | Amphenol Corporation | - Bulk (Alt: MS27481E16C99S) RoHS : Not Compliant |
| 0 | ||
| MS27481E16C99SD(LC) | Amphenol Corporation | - Bulk (Alt: MS27481E16C99SD(LC)) RoHS : Not Compliant |
| 0 | ||
| MS27504E10C99PA | Amphenol Corporation | - Bulk (Alt: MS27504E10C99PA) RoHS : Not Compliant |
| 0 | ||
![]() Newark | CBR04C999B5GAC![]() | KEMET Corporation | Cap, 9.9Pf, 50V, 0402; |Kemet CBR04C999B5GAC RoHS : Compliant |
| 8,498 | |
CBR04C999B5GAC![]() | KEMET Corporation | Cap, 9.9Pf, 50V, 0402; |Kemet CBR04C999B5GAC RoHS : Compliant |
| 8,498 | ||
| BTNKSC990 | C&K Switches | Cap Black Ksc9 Series; |C&k Components BTNKSC990 RoHS : Compliant |
| 6,640 | ||
CBR06C999BAGAC![]() | KEMET Corporation | Cap, 9.9Pf, 250V, 0603; |Kemet CBR06C999BAGAC RoHS : Compliant |
| 3,851 | ||
CBR06C999BAGAC![]() | KEMET Corporation | Cap, 9.9Pf, 250V, 0603; |Kemet CBR06C999BAGAC RoHS : Compliant |
| 3,851 | ||
CBR06C999B5GAC![]() | KEMET Corporation | Cap, 9.9Pf, 50V, 0603; |Kemet CBR06C999B5GAC RoHS : Compliant |
| 3,327 | ||
CBR06C999B5GAC![]() | KEMET Corporation | Cap, 9.9Pf, 50V, 0603; |Kemet CBR06C999B5GAC RoHS : Compliant |
| 3,327 | ||
| VC-9921 | BUD Industries Inc | 19" Wall Cabinet, Vision Cab; |Bud Industries VC-9921 RoHS : Compliant |
| 10 | ||
| EC-9904-BT | BUD Industries Inc | Case 19", 6.0, Steel, Portable; |Bud Industries EC-9904-BT RoHS : Compliant |
| 5 | ||
| VC-9932 | BUD Industries Inc | Cabinet; |Bud Industries VC-9932 RoHS : Compliant |
| 2 | ||
| VC-9933 | BUD Industries Inc | Steel Enclosure; |Bud Industries VC-9933 RoHS : Compliant |
| 2 | ||
| EC-9906-BT | BUD Industries Inc | 19" Case, Cabinet, Black, 8U, Steel; |Bud Industries EC-9906-BT RoHS : Compliant |
| 2 | ||
| EC-9905-BT | BUD Industries Inc | 19" Case, Cabinet, Black, 7U, Steel; |Bud Industries EC-9905-BT RoHS : Compliant |
| 2 | ||
| VC-9931 | BUD Industries Inc | Cabinet; |Bud Industries VC-9931 RoHS : Compliant |
| 1 | ||
| EC-9902-BT | BUD Industries Inc | 19" Case, Cabinet, Black, 4U, Steel; |Bud Industries EC-9902-BT RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | EVAL01-HMC996LP4E | Analog Devices Inc | HMC996LP4E Evaluation Board RoHS : Compliant |
| 49 | |
| EV1HMC994APM5 | Analog Devices Inc | EB requiring external bias tee RoHS : Not Compliant |
| 41 | ||
| DC995A | Analog Devices Inc | LT3080EDD - 1.1A Adjustable, S RoHS : Compliant |
| 39 | ||
| DC996B-J | Analog Devices Inc | LTC2215IUP - LVDS OUT, 65Msps, |
| 39 | ||
| DC992A | Analog Devices Inc | LTC3549EDCB Demo Board |
| 23 | ||
| EVAL01-HMC997LC4 | Analog Devices Inc | HMC997LC4 Evaluation Board |
| 20 | ||
| DC997B-F | Analog Devices Inc | LTC2240CUP-10 - LVDS OUT, VCC |
| 18 | ||
| DC999A | Analog Devices Inc | LTC3533EDE Demo Board - High E |
| 16 | ||
| DC997B-B | Analog Devices Inc | LTC2241CUP-12 - LVDS OUT, VCC |
| 12 | ||
| HMC998APM5ETR | Analog Devices Inc | Distributed Amplifier RoHS : Compliant |
| 9 | ||
| HMC998APM5E | Analog Devices Inc | Distributed Amplifier RoHS : Compliant |
| 8 | ||
| DC996B-A | Analog Devices Inc | LTC2208 - LVDS OUT, 130Msps, 1 |
| 4 | ||
| HMC994A-SX | Analog Devices Inc | 01-30GHz 0.5W DISTRIBUTED AMP RoHS : Compliant |
| 1 | ||
| HMC998A | Analog Devices Inc | 0.01-22GHz 2W DISTRIBUTED AMPL RoHS : Compliant |
| 0 | ||
| HMC997LC4TR-R5 | Analog Devices Inc | Analog Variable Gain amp SMT 1 |
| 0 | ||
![]() RS | GC99MFRA1 | StarTech | RIGHT ANGLE DB9 TO DB9 SERIAL CABLE ADAPTER TYPE 1 - M/F |
| 100 | |
| GC99MFRA2 | StarTech | RIGHT ANGLE DB9 TO DB9 SERIAL CABLE ADAPTER TYPE 2 - M/F |
| 41 | ||
| KC-99-54 | Kings Electronics | CONNECTOR BNC BRASS BERYLLIUM COPPER SILVER PLATED 500 V (RMS) TEFLON |
| 20 | ||
| VC9963 | ABB Group | PINT SIZE STANDARD CLEAR PVC CEMENT WITH DAUBER APPLICATOR. |
| 5 | ||
| VC9983 | ABB Group | PINT SIZE ALL WEATHER QUICKSET CLEAR CEMENT WITH DAUBER APPLICATOR. |
| 1 | ||
| EVC994 | ifm efector inc | PATCH CABLE, M8 MALE TO M8 FEMALE, 8M, 3-PIN, 3-WIRE, A-CODED, BLACK PUR |
| 1 | ||
| VC-9920 | BUD Industries Inc | RACK, CABINET,19 IN,9U/15.75 IN,17.72IN DEPTH, BLACK,200LB WT-CAP, VISIONCAB SERIES |
| 1 | ||
| VC-9930-B | BUD Industries Inc | RACK, CABINET,19 IN,6U/10.5 IN,21.77 IN DEPTH, BLACK,200LB WT-CAP, VISIONCAB SERIES |
| 1 | ||
| EC-9906-BT | BUD Industries Inc | RACK, CABINET,19 IN,8U/14 IN,14.5 IN DEPTH, BLACK,500LB WT-CAP, CLASSIC II SERIES |
| 1 | ||
| EC-9904-BT | BUD Industries Inc | RACK, CABINET,19 IN,6U/10.5 IN,14.5 IN DEPTH, BLACK,500LB WT-CAP, CLASSIC II SERIES RoHS : Compliant |
| 1 | ||
| EC-9902-BT | BUD Industries Inc | RACK, CABINET,19 IN,4U/7 IN,14.5 IN DEPTH, BLACK,500LB WT-CAP, CLASSIC II SERIES |
| 1 | ||
| C99 | Goodyear Belts | CLASSICAL V-BELT, 1 BAND, C' SECTION |
| 0 | ||
| C99 | Gates | V-BELT, C SECTION, SINGLE SECTION, HI-POWER II SERIES |
| 0 | ||
| C99 | OPTIBELT GmbH | OPTIBELT VB, C' BELT SECTION, 7/8" WIDTH, 103" OUTSIDE LENGTH |
| 0 | ||
| C99 | Browning (Bearings) | GRIPBELTS |
| 0 | ||
![]() Microchip Technology Inc | GC9932-127A | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 RoHS : Compliant |
| 2,596 | |
| GC9952-6LP | Microchip Technology Inc | Si Schottky Non Hermetic Plastic SMT, Projected EOL: 2046-08-15 RoHS : Compliant |
| 445 | ||
| GC9904-UC | Microchip Technology Inc | Si Schottky Non Hermetic Chip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9941-05 | Microchip Technology Inc | Si Schottky Non Hermetic Chip, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| GC9902-UC | Microchip Technology Inc | Si Schottky Non Hermetic Chip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9912-00 | Microchip Technology Inc | Si Schottky Non Hermetic Chip, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| GC9902-S12 | Microchip Technology Inc | Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9982-8JR | Microchip Technology Inc | Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9923-S12 | Microchip Technology Inc | Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9987-8JR | Microchip Technology Inc | Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9923-127A | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 RoHS : Compliant |
| 0 | ||
| GC99313-TSR | Microchip Technology Inc | Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| GC9986-128C | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| GC9902-127B-TSR | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9942-129B-TSR | Microchip Technology Inc | Si Schottky Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Rochester Electronics | MAC997B6G![]() | onsemi | TRIAC Logic - Sensitive Gate 400V 800mA TO-226-3 Box RoHS : Compliant |
| 10,000 | |
| CY7C9915JXC-5 | Cypress Semiconductor | Clock Generator 3.75MHz to 150MHz Input 150MHz Output 32-Pin PLCC RoHS : Compliant |
| 1,259 | ||
| CY7C9915JXI-1 | Cypress Semiconductor | Clock Generators and Synthesizers Tube RoHS : Compliant |
| 3,297 | ||
MPC9993FA![]() | Freescale Semiconductor | PLL Based Clock Driver, 9993 Series, 5 True Output(s), 0 Inverted Output(s), CMOS, PQFP32 RoHS : Not Compliant |
| 250 | ||
![]() Sager | C99 | TE Connectivity | Switch Bezels / Switch Caps C99=C-9 WHITE | 0 | ||
| ATS-17C-99-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 |
| 0 | ||
| C99561-000 | TE Connectivity | Heat Shrink Tubing & Sleeves 1814-10-340810 RoHS : Not Compliant |
| 0 | ||
| ATS-12C-99-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 |
| 0 | ||
| VC9932 | ABB Group | CL VC9932 PURPLE PRIMER - QUART 308 |
| 0 | ||
| ATS-07C-99-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM |
| 0 | ||
| EC9900-000 | TE Connectivity | Wire Labels & Markers ZHD-SCE-1K-9.5-50-9 RoHS : Compliant | 0 | |||
| EC9962-000 | TE Connectivity | Wire Labels & Markers 05801418 RoHS : Compliant |
| 0 | ||
| ATS-05C-99-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
| EC9921-000 | TE Connectivity | TE Connectivity TTC-PRINTER-3124-COVER |
| 0 | ||
| EC9983-000 | TE Connectivity | Wire Labels & Markers 5801440 RoHS : Compliant |
| 0 | ||
| 2455RC-99190133 | Honeywell Sensing and Control | Thermostats COMMERCIAL THERMAL RoHS : Compliant | 0 | |||
| EC9986-000 | TE Connectivity | Wire Labels & Markers 5801443 RoHS : Compliant |
| 0 | ||
| ATS-02C-99-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
| ATS-03C-99-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | MP86952GMJC994Z | MONOLITHIC POWER SYSTEMS. | AVAILABLE EU | 2,465 | ||
![]() ComSIT USA | SC99453P | Motorola Semiconductor Products | Electronic Component RoHS : Not Compliant | 378 | ||
| MPC991FA | Motorola Semiconductor Products | LOW VOLTAGE PLL CLOCK DRIVER PLL Based Clock Driver, 991 Series, 13 True Output(s), 0 Inverted Output(s), ECL, PQFP52 RoHS : Not Compliant | 132 | |||
![]() Interstate Connecting Components | MS27472E16C99PA | Amphenol Aerospace | MIL-DTL-38999 Series II connectors have up to 128 contacts contained in an insert. They are environmentally sealed and have an operating temperature between -65 C and 200 C. MIL-DTL-38999 II harsh environment thin walled restricted length connectors fea |
| 5 | |
| MS27472T10C99S L/C | Conesys | MIL-DTL-38999 Series II connectors have up to 128 contacts contained in an insert. They are environmentally sealed and have an operating temperature between -65 C and 200 C. MIL-DTL-38999 II harsh environment thin walled restricted length connectors fea |
| 2 | ||
| EC9962-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC05801418 RoHS : Compliant | 0 | |||
| EC9921-000 | TE Connectivity | TTC-PRINTER-3124-COVER |
| 0 | ||
| EC9983-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC05801440 RoHS : Compliant | 0 | |||
| EC9986-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC05801443 RoHS : Compliant | 0 | |||
| EC9984-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC05801441 RoHS : Compliant | 0 | |||
| MS27480T10C99S | Amphenol Aerospace | MIL-DTL-38999 Series II connectors have up to 128 contacts contained in an insert. They are environmentally sealed and have an operating temperature between -65 C and 200 C. MIL-DTL-38999 II harsh environment thin walled restricted length connectors fea |
| 0 | ||
| EC9963-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC05801419 RoHS : Compliant | 0 | |||
| EC9928-000 | TE Connectivity | D-SCE-2.4-50-4-CS34034 | 0 | |||
| EC9975-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC05801432 RoHS : Compliant | 0 | |||
| EC9948-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC05801447 RoHS : Compliant | 0 | |||
| EC9973-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC05801430 RoHS : Compliant | 0 | |||
| MS27473T10C99PC | Amphenol Aerospace | MIL-DTL-38999 Series II connectors have up to 128 contacts contained in an insert. They are environmentally sealed and have an operating temperature between -65 C and 200 C. MIL-DTL-38999 II harsh environment thin walled restricted length connectors fea |
| 0 | ||
| EC9981-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC05801438 RoHS : Compliant | 0 | |||
![]() NexGen Digital | IMIC9915AY![]() | Cypress Semiconductor | RoHS : Not Compliant | 121 | ||
HMC992LP5E![]() | Hittite Microwave Corp | RoHS : Compliant | 7 | |||
![]() PEI Genesis | 8D711ZC99PC | SOURIAU-SUNBANK |
| 0 | ||
| 8D011ZC99SE | SOURIAU-SUNBANK |
| 0 | |||
| 8D711ZC99PA | SOURIAU-SUNBANK |
| 0 | |||
| 8DA517ZC99SE | SOURIAU-SUNBANK |
| 0 | |||
| 8D117ZC99PN | SOURIAU-SUNBANK |
| 0 | |||
| 8D511ZC99PN | SOURIAU-SUNBANK |
| 0 | |||
| 8D711ZC99SA | SOURIAU-SUNBANK |
| 0 | |||
| 8D717ZC99PB | SOURIAU-SUNBANK |
| 0 | |||
| 8DA511ZC99SE | SOURIAU-SUNBANK |
| 0 | |||
| 8D517ZC99SA | SOURIAU-SUNBANK |
| 0 | |||
| 8DA511ZC99PC | SOURIAU-SUNBANK |
| 0 | |||
| 8D517ZC99SN | SOURIAU-SUNBANK |
| 0 | |||
| MS3437C99C | SOURIAU-SUNBANK |
| 0 | |||
| 8D117ZC99SN | SOURIAU-SUNBANK |
| 0 | |||
| 8D511ZC99SN | SOURIAU-SUNBANK |
| 0 | |||
![]() Chip 1 Exchange | C99830-000 | INSTOCK | 501,540 | |||
| LC99115L-S | SANYO Semiconductor Co Ltd | INSTOCK | 3,295 | |||
| CPC9909NE | INSTOCK | 1,955 | ||||
| MC990001A09 | INSTOCK | 1 | ||||
![]() Avnet Abacus | EC9962-000 | TE Connectivity | (Alt: EC9962-000) RoHS : Compliant | 0 | ||
| EC9921-000 | TE Connectivity | Cover for TE3124 Thermal Transfer Label Printers (Alt: EC9921-000) RoHS : Not Compliant | 0 | |||
| EC9983-000 | TE Connectivity | (Alt: EC9983-000) RoHS : Compliant | 0 | |||
| EC9986-000 | TE Connectivity | (Alt: EC9986-000) RoHS : Compliant | 0 | |||
| EC9984-000 | TE Connectivity | (Alt: EC9984-000) RoHS : Compliant | 0 | |||
| EC9963-000 | TE Connectivity | (Alt: EC9963-000) RoHS : Compliant | 0 | |||
| C99933-000 | TE Connectivity | (Alt: C99933-000) RoHS : Compliant | 0 | |||
| EC9975-000 | TE Connectivity | (Alt: EC9975-000) RoHS : Compliant | 0 | |||
| EC9973-000 | TE Connectivity | (Alt: EC9973-000) RoHS : Compliant | 0 | |||
| EC9981-000 | TE Connectivity | (Alt: EC9981-000) RoHS : Compliant | 0 | |||
| EC9982-000 | TE Connectivity | (Alt: EC9982-000) RoHS : Compliant | 0 | |||
CBR04C999B5GAC![]() | KEMET Corporation | SMD Multilayer Ceramic Capacitor 99 pF 50 V 0402 1005 Metric 01pF C0G NP0 - Tape and Reel (Alt: CBR04C999B5GAC) RoHS : Compliant | 0 | |||
CBR06C999BAGAC![]() | KEMET Corporation | SMD Multilayer Ceramic Capacitor 99 pF 250 V 0603 1608 Metric 01pF C0G NP0 - Tape and Reel (Alt: CBR06C999BAGAC) RoHS : Compliant | 0 | |||
CBR06C999B5GAC![]() | KEMET Corporation | SMD Multilayer Ceramic Capacitor 99 pF 50 V 0603 1608 Metric 01pF C0G NP0 - Tape and Reel (Alt: CBR06C999B5GAC) RoHS : Compliant | 0 | |||
| RCWP25120000ZSEC99 | Vishay Intertechnologies | Res Thick Film Jumper 2512 0Ohm 1W Molded TR (Alt: RCWP25120000ZSEC99) RoHS : Compliant | 0 | |||
![]() Avnet Silica | STWLC99JR | STMicroelectronics | QiCompliant Inductive Wireless Power Receiver 121Pin WLCSP TR (Alt: STWLC99JR) RoHS : Compliant | 0 | ||
| LC99TIAMD | Quectel Wireless Solutions Co Ltd | (Alt: LC99TIAMD) RoHS : Compliant | 0 | |||
| GC99670-00 | Microchip Technology Inc | SchottkySurface Mount Limiting Diode DriverSchottkySurface Mount Limiting Diode Driver (Alt: GC99670-00) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | 33-HC990EXF-35-00-0190 | Calian |
| 0 | ||
| 33-HC990XF-28 | Calian | HC990XF Extended-Filter Full-Band GNSS Low-Profile Helical Antenna + L-Band, 28dB |
| 0 | ||
| 33-HC997EXF-28-00-1500 | Calian | HC997EXF Extended-Filter Embedded Triple-band GNSS Helical Antenna + L-Band, 28dB, SMA straight male connector, 1500mm cable |
| 0 | ||
| 33-HC990EXF-35-00-1500 | Calian | HC990EXF Extended-Filter Embedded Full GNSS Helical Antenna + L-Band, 35dB, SMA straight male connector, 1500mm cable |
| 0 | ||
| 33-HC990EXF-35-05-0361 | Calian |
| 0 | |||
| 33-HC997EXF-35-00-1500 | Calian | HC997EXF Extended-Filter Embedded Triple-band GNSS Helical Antenna + L-Band, 35dB, SMA straight male connector, 1500mm cable |
| 0 | ||
| HC990EXF-35-05-0361 | Calian | Embedded, Full GNSS Spectrum + L-band with eXtended Filtering, 35dB active gain, MCX R/A Male/Plug, 361mm cable length |
| 0 | ||
| 33-HC990EXF-35-00-0150 | Calian | Internal p/n 110-0342-A |
| 0 | ||
| 33-HC990EXF-28-00-1500 | Calian | HC990EXF Extended-Filter Embedded Full GNSS Helical Antenna + L-Band, 28dB, SMA straight male connector, 1500mm cable |
| 0 | ||
![]() Chip-Germany GmbH | C9900-A323 PCI-BUS | Beckhoff Automation GmbH | 2 | |||
| C9900-K115 TYP BNC/BELDE | Beckhoff Automation GmbH | 2 | ||||
| C9900-K435 128079 | Beckhoff Automation GmbH | 1 | ||||
| C9900-K535 129179 | Becmer | 1 | ||||
![]() Component Electronics, Inc | HMC994APM5E | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 223 | |
| C9930-80003 | Hewlett Packard Co | IN STOCK SHIP TODAY |
| 49 | ||
| KC-99-54 | Kings Electronics | IN STOCK SHIP TODAY |
| 9 | ||
| KC-99-35 | Kings Electronics | IN STOCK SHIP TODAY |
| 5 | ||
![]() EBV Elektronik | IGC99T120T8RMX1SA1 | Infineon Technologies AG | (Alt: SP000945524) RoHS : Compliant | 0 | ||
| IGC99T120T8RHX1SA1 | Infineon Technologies AG | TRENCHSTOPTM IGBT4 High Power Chip (Alt: SP000945508) RoHS : Compliant | 0 | |||
| IGC99T120T8RLX1SA3 | Infineon Technologies AG | IGBT CHIPS (Alt: SP000945514) RoHS : Compliant | 0 | |||
| IGC99T120T8RQX1SA1 | Infineon Technologies AG | IGBT CHIPS (Alt: SP000945530) RoHS : Compliant | 0 | |||
![]() Master Electronics | C99 | TE Connectivity | Switch Access Round Cap Push Button Switch Loose RoHS : Compliant |
| 1,200 | |
| KC-99-20 | Winchester Interconnect | BNC Female T Connector - Female to Female to Female - 50 Ohm - Silver Plating. RoHS : Compliant |
| 26 | ||
| C995-8758-002 | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| C99561-000 | TE Connectivity | 1814-10-340810 RoHS : Compliant |
| 0 | ||
| VC9932 | Thomas & Betts | PURPLE PRIMER - QUART 3080 RoHS : Compliant |
| 0 | ||
| GC9902-S12 | Microchip Technology Inc | RoHS : Compliant |
| 0 | ||
| GC9904-UC | Microchip Technology Inc | RoHS : Compliant |
| 0 | ||
| EC9900-000 | TE Connectivity | ZHD-SCE-1K-9.5-50-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| EC9962-000 | TE Connectivity | 05801418 RoHS : Compliant |
| 0 | ||
| GC9923-127A | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip RoHS : Compliant |
| 0 | ||
| C995-8756-000 | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| EC9921-000 | TE Connectivity | TTC-PRINTER-3124-COVER RoHS : Compliant |
| 0 | ||
| EC9983-000 | TE Connectivity | Cable Accessories Wire Marker Polyvinyl Chloride Yellow Box RoHS : Compliant |
| 0 | ||
| EC9986-000 | TE Connectivity | 05801443 RoHS : Compliant |
| 0 | ||
| 2455RC-99470004 | Honeywell Sensing and Control | Honeywell Ceramic Automatic Reset Thermostats 2455RC Series 2455RC-99470004 Switch Type SPST Automatic Reset Open on Rise Contact Type Silver Alloy Ceramic 15 A/10 A B205 T846 Operating Temperature 0 °C to 260 °C [32 °F to 500 °F] Open Temperature 140 °C [284 °F] Close Temperature 115 °C [239 °F] Open Tolerance 4 °C [7.2 °F] Close Tolerance 8 °C [14.4 °F] RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C9905-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male Right Angle to TNC Female Bulkhead Low Loss Cable 60 Inch Length Using LMR-195-UF Coax., Radio frequency assembly TNC male right angle to TNC female bulkhead low loss cable 60 inch length using LMR-195-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC female bulkhead low loss cable 60 inch length using LMR-195-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss right angle TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C9905-60 can also be known as a low loss right angle TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9905-60 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our right angle TNC male to bulkhead TNC female cable has a maximum VSWR of 1.35:1. TNC plug to TNC jack cable assembly PE3C9905-60 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9905-60 can also be used in the other direction and will be a TNC female bulkhead to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,901 | |
| PE3C9930-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MCX Plug Right Angle to Push-On SMB Plug Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly MCX plug right angle to push-on SMB plug cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to push-on SMB plug cable 12 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MCX cable connection on one end and a SMB cable connection on the other. Our right angle MCX to SMB cable assembly has a plug gender on end 1 and a plug on end 2. PE3C9930-12 can also be known as a right angle MCX male to SMB male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9930-12 RF cable has a FEP jacket of 0.105-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our right angle MCX plug to SMB plug cable has a maximum VSWR of 1.4:1. MCX male to SMB male cable assembly PE3C9930-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MCX cable assembly is manufactured with right angle MCX to SMB cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9930-12 can also be used in the other direction and will be a SMB plug to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMB cable assembly for quick shipment worldwide. Variations of MCX and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMB RF cable assembly as per your requirements. |
| 366 | ||
| PE3C9930-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. MCX Plug Right Angle to Push-On SMB Plug Cable 9 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly MCX plug right angle to push-on SMB plug cable 9 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to push-on SMB plug cable 9 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MCX cable connection on one end and a SMB cable connection on the other. Our right angle MCX to SMB cable assembly has a plug gender on end 1 and a plug on end 2. PE3C9930-9 can also be known as a right angle MCX male to SMB male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9930-9 RF cable has a FEP jacket of 0.105-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our right angle MCX plug to SMB plug cable has a maximum VSWR of 1.4:1. MCX male to SMB male cable assembly PE3C9930-9 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MCX cable assembly is manufactured with right angle MCX to SMB cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9930-9 can also be used in the other direction and will be a SMB plug to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMB cable assembly for quick shipment worldwide. Variations of MCX and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMB RF cable assembly as per your requirements. |
| 366 | ||
| PE3C9904-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 24 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 24 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9904-24 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9904-24 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9904-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9904-24 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 41 | ||
| PE3C9904-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 48 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 48 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9904-48 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9904-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9904-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9904-48 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 41 | ||
| PE3C9962-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMPS Female Right Angle to 2.92mm Female Cable 12 Inch Length Using PE-P047HF Coax., Radio frequency assembly SMPS female right angle to 2.92mm female cable 12 inch length using PE-P047HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female right angle to 2.92mm female cable 12 inch length using PE-P047HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMPS to 2.92mm cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMPS cable connection on one end and 2.92mm cable connection on the other. Our right angle SMPS to 2.92mm cable assembly has female gender on end 1 and female on end 2. PE3C9962-12 can also be known as a right angle SMPS jack to 2.92mm jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. These cable assemblies are suitable for scientific research, high-reliability, high-density for aerospace & defense application, ground base station &communication systems, avionics and radar systems where RF signal integrity is critical. This cable assembly employs durable and flexible materials, and with a 0.100 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMPS jack to 2.92mm jack cable assembly PE3C9962-12 is built with PE-P047HF which is a flexible coax type. The Pasternack flexible SMPS cable assembly is manufactured with right angle SMPS to 2.92mm cable connectors, has a 50 Ohm impedance and is double shielded. This blue RF cable assembly features an FEP jacket with 0.06 inches diameter. One connector features the solder attachment method and a beryllium copper body with gold plating, while the other has clamp/solder attachment method and passivated stainless steel body with plating. RF specs on this 40 GHz maximum frequency SMPS right angle female to 2.92mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9962-12 can also be used in the other direction and will be 2.92mm female to right angle SMPS female cable assembly if the opposite connectivity is required. SMPS right angle jack to 2.92mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMPS to 2.92mm cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMPS female right angle to 2.92mm female cable 12 inch length using PE-P047HF coax. |
| 29 | ||
| PE3C9908/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Female Bulkhead to Trimmed Lead Cable 36 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to trimmed lead cable 36 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to trimmed lead cable 36 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a trimmed lead cable connection on the other. Our BNC to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9908/HS-36 can also be known as a BNC jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9908/HS-36 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has a between series connection. BNC jack to trimmed lead sexless cable assembly PE3C9908/HS-36 is built with RG178 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to trimmed lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9908/HS-36 can also be used in the other direction and will be a trimmed lead sexless to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to trimmed lead cable assembly for quick shipment worldwide. Variations of BNC and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to Trimmed Lead RF cable assembly as per your requirements. |
| 6 | ||
| PE3C9957 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm. SMPS Female to 1.85mm Female Cable Using PE-P047HF Coax., Radio frequency assembly SMPS female to 1.85mm female cable using PE-P047HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female to 1.85mm female cable using PE-P047HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMPS to 1.85mm cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMPS cable connection on one end and 1.85mm cable connection on the other. Our SMPS to 1.85mm cable assembly has female gender on end 1 and female on end 2. PE3C9957 can also be known as a SMPS jack to 1.85mm jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. These cable assemblies are suitable for scientific research, high-reliability, high-density for aerospace & defense application, ground base station &communication systems, avionics and radar systems where RF signal integrity is critical. This cable assembly employs durable and flexible materials, and with a 0.100 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMPS jack to 1.85mm jack cable assembly PE3C9957 is built with PE-P047HF which is a flexible coax type. The Pasternack flexible SMPS cable assembly is manufactured with SMPS to 1.85mm cable connectors, has a 50 Ohm impedance and is double shielded. This blue RF cable assembly features an FEP jacket with 0.06 inches diameter. One connector features the solder attachment method and a beryllium copper body with gold plating, while the other has clamp/solder attachment method and passivated stainless steel body with plating. RF specs on this 40 GHz maximum frequency SMPS female to 1.85mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9957 can also be used in the other direction and will be 1.85mm female to SMPS female cable assembly if the opposite connectivity is required. SMPS jack to 1.85mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMPS to 1.85mm cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMPS female to 1.85mm female cable using PE-P047HF coax. | 3 | |||
| PE3C9955-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMPS Female to 2.92mm Female Cable 6 Inch Length Using PE-P047HF Coax., Radio frequency assembly SMPS female to 2.92mm female cable 6 inch length using PE-P047HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female to 2.92mm female cable 6 inch length using PE-P047HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMPS to 2.92mm cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMPS cable connection on one end and 2.92mm cable connection on the other. Our SMPS to 2.92mm cable assembly has female gender on end 1 and female on end 2. PE3C9955-6 can also be known as a SMPS jack to 2.92mm jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. These cable assemblies are suitable for scientific research, high-reliability, high-density for aerospace & defense application, ground base station &communication systems, avionics and radar systems where RF signal integrity is critical. This cable assembly employs durable and flexible materials, and with a 0.100 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMPS jack to 2.92mm jack cable assembly PE3C9955-6 is built with PE-P047HF which is a flexible coax type. The Pasternack flexible SMPS cable assembly is manufactured with SMPS to 2.92mm cable connectors, has a 50 Ohm impedance and is double shielded. This blue RF cable assembly features an FEP jacket with 0.06 inches diameter. One connector features the solder attachment method and a beryllium copper body with gold plating, while the other has clamp/solder attachment method and passivated stainless steel body with plating. RF specs on this 40 GHz maximum frequency SMPS female to 2.92mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9955-6 can also be used in the other direction and will be 2.92mm female to SMPS female cable assembly if the opposite connectivity is required. SMPS jack to 2.92mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMPS to 2.92mm cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMPS female to 2.92mm female cable 6 inch length using PE-P047HF coax. |
| 1 | ||
| PE3C9956-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMPS Female to 1.85mm Male Cable 6 Inch Length Using PE-P047HF Coax., Radio frequency assembly SMPS female to 1.85mm male cable 6 inch length using PE-P047HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female to 1.85mm male cable 6 inch length using PE-P047HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMPS to 1.85mm cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMPS cable connection on one end and 1.85mm cable connection on the other. Our SMPS to 1.85mm cable assembly has female gender on end 1 and male on end 2. PE3C9956-6 can also be known as a SMPS jack to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. These cable assemblies are suitable for scientific research, high-reliability, high-density for aerospace & defense application, ground base station &communication systems, avionics and radar systems where RF signal integrity is critical. This cable assembly employs durable and flexible materials, and with a 0.100 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMPS jack to 1.85mm plug cable assembly PE3C9956-6 is built with PE-P047HF which is a flexible coax type. The Pasternack flexible SMPS cable assembly is manufactured with SMPS to 1.85mm cable connectors, has a 50 Ohm impedance and is double shielded. This blue RF cable assembly features an FEP jacket with 0.06 inches diameter. Both the connectors have a solder attachment method and a beryllium copper body with gold plating. RF specs on this 40 GHz maximum frequency SMPS female to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9956-6 can also be used in the other direction and will be 1.85mm male to SMPS female cable assembly if the opposite connectivity is required. SMPS jack to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMPS to 1.85mm cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMPS female to 1.85mm male cable 6 inch length using PE-P047HF coax. |
| 1 | ||
| PE3C9938 | Pasternack Enterprises | 0 | ||||
| PE3C9970-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMPS Female Right Angle to SMA Male Cable 12 Inch Length Using PE-P047HF Coax., Radio frequency assembly SMPS female right angle to SMA male cable 12 inch length using PE-P047HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female right angle to SMA male cable 12 inch length using PE-P047HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMPS to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMPS cable connection on one end and SMA cable connection on the other. Our right angle SMPS to SMA cable assembly has female gender on end 1 and male on end 2. PE3C9970-12 can also be known as a right angle SMPS jack to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. These cable assemblies are suitable for scientific research, high-reliability, high-density for aerospace & defense application, ground base station &communication systems, avionics and radar systems where RF signal integrity is critical. This cable assembly employs durable and flexible materials, and with a 0.100 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMPS jack to SMA plug cable assembly PE3C9970-12 is built with PE-P047HF which is a flexible coax type. The Pasternack flexible SMPS cable assembly is manufactured with right angle SMPS to SMA cable connectors, has a 50 Ohm impedance and is double shielded. This blue RF cable assembly features an FEP jacket with 0.06 inches diameter. One connector features the solder attachment method and a beryllium copper body with gold plating, while the other has solder/solder attachment method and brass body with gold plating. RF specs on this 27 GHz maximum frequency SMPS right angle female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9970-12 can also be used in the other direction and will be SMA male to right angle SMPS female cable assembly if the opposite connectivity is required. SMPS right angle jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMPS to SMA cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMPS female right angle to SMA male cable 12 inch length using PE-P047HF coax. |
| 0 | ||
| PE3C9983 | Pasternack Enterprises | 0 | ||||
| PE3C9920 | Pasternack Enterprises | 0 | ||||
| PE3C9925 | Pasternack Enterprises | 0 | ||||
![]() Vyrian | DC997B-F | Analog Devices Inc | 11,890 | |||
| HMC995LP5GETR | Analog Devices Inc | Wide Band High Power Amplifier, 1 Func, GAAS RoHS : Compliant | 10,214 | |||
| HMC994LP5E | Analog Devices Inc | Wide Band Medium Power Amplifier, 0MHz Min, 28000MHz Max RoHS : Compliant | 10,140 | |||
| DC992A | Analog Devices Inc | 9,849 | ||||
| MAX3747AEUB-C99 | Analog Devices (Maxim Integrated) | 8,166 | ||||
MAC997A8G![]() | onsemi | 4 Quadrant Logic Level TRIAC, 600V V(DRM), 0.8A I(T)RMS, TO-92 RoHS : Compliant | 7,828 | |||
| GC9986-8JR | Microchip Technology Inc | Mixer Diode, High Barrier, C Band, Silicon RoHS : Compliant | 7,802 | |||
| HMC998APM5ETR | Analog Devices Inc | RoHS : Compliant | 7,481 | |||
| HMC994ALP5ETR | Analog Devices Inc | Wide Band Medium Power Amplifier RoHS : Compliant | 7,341 | |||
| DC996B-E | Analog Devices Inc | 7,112 | ||||
| DC996A-P | Analog Devices Inc | 6,909 | ||||
| EVAL01-HMC997LC4 | Analog Devices Inc | 6,742 | ||||
| HMC994A-SX | Analog Devices Inc | RoHS : Compliant | 6,387 | |||
| EVAL01-HMC998LP5 | Analog Devices Inc | 5,460 | ||||
| STWLC99JR | STMicroelectronics | 3,621 | ||||
![]() Win Source Electronics | CSTCE8M00G15C99-R0 | Murata Manufacturing Co Ltd | RoHS : Compliant |
| 2,500 | |
| HMC994APM5E | Analog Devices Inc | IC RF AMP 0HZ-28GHZ 32LFCSP-CAV RoHS : Compliant |
| 1,088 | ||
| HMC994APM5ETR | Analog Devices Inc | IC RF AMP 0HZ-28GHZ 32LFCSP-CAV / RF Amplifier IC 0Hz ~ 28GHz 32-LFCSP-CAV (5x5) RoHS : Compliant |
| 1,010 | ||
| HMC998APM5E | Analog Devices Inc | IC AMP GP 0HZ-22GHZ 32LFCSP-CAV / RF Amplifier IC General Purpose 0Hz ~ 22GHz 32-LFCSP-CAV (5x5) RoHS : Compliant |
| 950 | ||
| HMC998APM5ETR-R5 | Analog Devices Inc | IC RF AMP GPS 0HZ-22GHZ 32LFCSP RoHS : Compliant |
| 950 | ||
| HMC998APM5ETR | Analog Devices Inc | IC AMP GP 0HZ-22GHZ 32LFCSP-CAV / RF Amplifier IC General Purpose 0Hz ~ 22GHz 32-LFCSP-CAV (5x5) RoHS : Compliant |
| 930 | ||
| HMC998A | Analog Devices Inc | IC RF AMP VSAT 100MHZ-20GHZ DIE / RF Amplifier IC VSAT 100MHz ~ 20GHz Die RoHS : Compliant |
| 500 | ||
| HMC996LP4E | Analog Devices Inc | IC RF AMP GPS 5GHZ-12GHZ 24QFN / RF Amplifier IC General Purpose 5GHz ~ 12GHz 24-QFN (4x4) RoHS : Compliant |
| 333 | ||
| HMC996LP4ETR | Analog Devices Inc | IC RF AMP RADAR 5GHZ-12GHZ 24QFN / RF Amplifier IC Radar 5GHz ~ 12GHz 24-QFN (4x4) RoHS : Compliant |
| 310 | ||
| HMC994A | Analog Devices Inc | IC RF AMP VSAT 0HZ-30GHZ DIE RoHS : Compliant |
| 190 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |