| Datenblatt-Suchmaschine für elektronische Bauteile |
|
M1041S-R Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
![]() Rochester Electronics | BUK7M10-40EX![]() | Nexperia | Power Field-Effect Transistor, 56A I(D), 40V, 0.01ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant |
| 4,500 | |
| NSPM1041BMUTBG | onsemi | Surge Protection, 4.8 V, 125 A ESD Protection, Peak Working Voltage 4.8V RoHS : Compliant |
| 11,373,518 | ||
| ADM1041ARQZ | onsemi | Power Supply Secondary-Side Controller 24-SOP Tube RoHS : Compliant |
| 32 | ||
| XC2060M104F80LRABKXQMA1 | Infineon Technologies AG | 16bit Microcontroller RoHS : Compliant |
| 47,320 | ||
ADM1041AARQZ![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO24 RoHS : Compliant |
| 9,284 | ||
| ADM1041ARQ-2 | Analog Devices Inc | SECONDARY-Side Controller with Current SHARE and HOUSEKEEPING RoHS : Not Compliant |
| 548 | ||
ADM1041ARQZ-REEL![]() | Analog Devices Inc | Power Supply Secondary-Side Controller 24-SOP T/R RoHS : Compliant |
| 2,500 | ||
ADM1041ARQZ![]() | Analog Devices Inc | Power Supply Secondary-Side Controller 24-SOP Tube RoHS : Compliant |
| 8,790 | ||
ADM1041ARQZ-REEL7![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO24 RoHS : Compliant |
| 9,226 | ||
TSM104WIPWR![]() | Texas Instruments | Op Amp Standard 900kHz 16-SOP T/R RoHS : Compliant |
| 5,694 | ||
TSM104WAIPWR![]() | Texas Instruments | Op Amp Standard 900kHz 16-SOP T/R RoHS : Compliant |
| 8,000 | ||
TSM104WIPW![]() | Texas Instruments | Operational Amplifier, 4 Func, 6000uV Offset-Max, BIPolar, PDSO16 RoHS : Compliant |
| 1,620 | ||
TSM104WIDR![]() | Texas Instruments | Op Amp Standard 900kHz 16-SOIC T/R RoHS : Compliant |
| 7,500 | ||
TSM104WAIDR![]() | Texas Instruments | Op Amp Standard 900kHz 16-SOIC T/R RoHS : Compliant |
| 7,210 | ||
TSM104WAID![]() | Texas Instruments | Op Amp Standard 900kHz 16-SOIC Tube RoHS : Compliant |
| 3,570 | ||
![]() ComSIT USA | DSPIC33EV256GM104IPT | AVAILABLE EU | 81 | |||
| TMM10401SDSMPTR | Samtec Inc | AVAILABLE EU | 6 | |||
![]() NexGen Digital | BGM1043N7E6327XUSA1 | Infineon Technologies AG | RoHS : Compliant | 55,391 | ||
| TFM-104-02-L-S-WT-K-TR | Samtec Inc | RoHS : Compliant | 306 | |||
![]() Powell Electronics | MTMM-104-03-L-S-130 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 801 | |
| MTMM-104-05-G-S-146 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 801 | ||
| MTMM-104-11-L-S-414 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 801 | ||
| MTMM-104-13-T-S-535 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 801 | ||
| MTMM-104-03-G-D-125 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 638 | ||
| MTMM-104-04-S-D-135 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 638 | ||
| MTMM-104-05-L-D-197 | Samtec Inc | Connector Header RoHS : Compliant |
| 638 | ||
| MTMM-104-06-L-D-020 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 638 | ||
| MTMM-104-06-S-D-225 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 638 | ||
| MTMM-104-07-L-D-250 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 638 | ||
| MTMM-104-08-S-D-315 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 638 | ||
| MTMM-104-09-G-D-105 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 638 | ||
| MTMM-104-10-G-D-305 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 638 | ||
| MTMM-104-10-T-D-410 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 638 | ||
| MTMM-104-02-T-D-080 | Samtec Inc | Connector Header RoHS : Compliant |
| 549 | ||
![]() PUI | CFRM104-HF | 82,500 | ||||
| CEFM104-G | 10,000 | |||||
![]() Richardson RFPD | REM10-4815S/A/CTRL | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 15V 0.67A 10W Medical 6-P RoHS : Compliant |
| 0 | |
| PSEPM1045-1200 | Wall Industries Inc | AC/DC Power Supply Single-OUT 12V 3.75A 45W 14-Pin RoHS : Compliant | 0 | |||
| REM10-4805D/A | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 5V/-5V 1A/-1A 10W Medical RoHS : Compliant |
| 0 | ||
REM10-4805D/A/CTRL![]() | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 5V/-5V 1A/-1A 10W Medical RoHS : Compliant |
| 0 | ||
| REM10-4812D/C | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 12V/-12V 0.416A/-0.416A 1 RoHS : Compliant |
| 0 | ||
| REM10-4812SW/A | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 12V 0.83A 10W Medical 5-P RoHS : Compliant |
| 0 | ||
| REM10-4815DW/C | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 15V/-15V 0.333A/-0.333A 1 RoHS : Compliant |
| 0 | ||
REM10-483.3S/A/CTRL![]() | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 3.3V 2.5A 10W Medical 6-P RoHS : Compliant |
| 0 | ||
| 760M10414 | Knowles CDE | FILM CAPACITOR RoHS : Compliant | 0 | |||
| PSEPM1040-4800 | Wall Industries Inc | AC/DC Power Supply Single-OUT 48V 0.83A 40W 14-Pin RoHS : Compliant | 0 | |||
REM10-4812SW/A/CTRL![]() | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 12V 0.83A 10W Medical 6-P RoHS : Compliant |
| 0 | ||
| PSEPM1045-1500 | Wall Industries Inc | AC/DC Power Supply Single-OUT 15V 3A 45W 14-Pin RoHS : Compliant | 0 | |||
| PSEPM1045-24D0 | Wall Industries Inc | AC/DC Power Supply Dual-OUT 24V/5V 1.77A/0.5A 45W RoHS : Compliant | 0 | |||
| PSEPM1045-4800 | Wall Industries Inc | AC/DC Power Supply Single-OUT 48V 0.93A 45W 14-Pin | 0 | |||
| REM10-483.3SW/C | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 3.3V 2.5A 10W Medical 5-P RoHS : Compliant |
| 0 | ||
![]() Rutronik | BYM10-400-E3/96 | Vishay Intertechnologies | SI-DIODE 1A 400V MELF RoHS : Compliant |
| 4,500 | |
![]() Avnet Asia | SVM1045V | PanJit Semiconductor | Diode Schottky 10A 3-Pin TO-277 (Alt: SVM1045V) RoHS : Compliant | 10,000 | ||
| NPIM104P3R3MTRF | NIC Components Corp | Power Inductor (SMD), 3.3 uH, ? 20%, 11 A, Shielded, 20 A, 11mm x 10mm x 3.8mm (Alt: NPIM104P3R3MTRF) RoHS : Compliant |
| 4,000 | ||
| TSM-104-01-S-DV-007-P-TR | Samtec Inc | Pin Header, Board-to-Board, 2.54 mm, 2 Rows, 8 Contacts, Surface Mount, TSM Series, Unshrouded (Alt: TSM-104-01-S-DV-007-P-TR) RoHS : Compliant |
| 1,000 | ||
| TSM-104-01-S-DV-P-TR | Samtec Inc | (Alt: TSM-104-01-S-DV-P-TR) RoHS : Compliant | 200 | |||
| RM104PJ360CS | Samsung Electro-Mechanics | RESISTOR ARRAY INVERTED CONCAVE 0402 4R 36OHM 0.0625W| (Alt: RM104PJ360CS) RoHS : Compliant | 0 | |||
| TSM-104-01-F-SV-P-TR | Samtec Inc | Pin Header, Board-to-Board, 2.54 mm, 1 Rows, 4 Contacts, Surface Mount, TSM Series, Unshrouded (Alt: TSM-104-01-F-SV-P-TR) RoHS : Compliant | 0 | |||
BUK7M10-40EX![]() | Nexperia | (Alt: BUK7M10-40EX) RoHS : Compliant | 0 | |||
| TMM-104-01-T-S-RA | Samtec Inc | Pin Header, Board-to-Board, 3.3 A, 2 mm, 1 Rows, 4 Contacts, Through Hole, TMM Series, Unshrouded (Alt: TMM-104-01-T-S-RA) RoHS : Compliant | 0 | |||
| SMM-104-02-S-D-P-TR | Samtec Inc | Conn Socket Strip SKT 8 POS 2mm Solder ST SMD T/R (Alt: SMM-104-02-S-D-P-TR) RoHS : Compliant | 0 | |||
| TSM-104-01-F-SV-A-P-TR | Samtec Inc | (Alt: TSM-104-01-F-SV-A-P-TR) RoHS : Compliant | 0 | |||
| MTMM-104-04-T-S-160 | Samtec Inc | Pin Header, Board-to-Board, 2 mm, 1 Rows, 4 Contacts, Through Hole, MTMM Series (Alt: MTMM-104-04-T-S-160) RoHS : Compliant | 0 | |||
| RM104PJ330CS | Samsung Electro-Mechanics | RESISTOR ARRAY INVERTED CONCAVE 0402 4R 33OHM 0.0625W| (Alt: RM104PJ330CS) RoHS : Compliant | 0 | |||
| NPIM104P6R8MTRF | NIC Components Corp | Power Inductor (SMD), 6.8 uH, ? 20%, 8.5 A, Shielded, 13.5 A, 11mm x 10mm x 3.8mm (Alt: NPIM104P6R8MTRF) RoHS : Compliant |
| 0 | ||
| TSM-104-01-L-DV-P-TR | Samtec Inc | (Alt: TSM-104-01-L-DV-P-TR) RoHS : Compliant | 0 | |||
| RM104PJ150CS | Samsung Electro-Mechanics | RESISTOR ARRAY INVERTED CONCAVE 0402 4R 15OHM 0.0625W| (Alt: RM104PJ150CS) RoHS : Compliant | 0 | |||
![]() DB Roberts | HFH-M10-40ZI | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly |
| 8,595 | |
| EM-10-41 | Southco |
| 13 | |||
| EM-10-40 | Southco |
| 5 | |||
| EM-10-42 | Southco | 0 | ||||
| AESSM10-45 | PennEngineering (PEM) | 0 | ||||
| RWA45M1045 | Essentra Components | 0 | ||||
| EM-10-43-410 | Southco | 0 | ||||
| HFHS-M10-40 | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | 0 | |||
| HFHB-M10-40X | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows s | 0 | |||
| LEDM-1-04 | Essentra Components | LED Spacer5MM T-1-3/4Blk4MM Spc LED Spacer 5MM T-1-3/4 Black | 0 | |||
| HFHDS-M10-40 | PennEngineering (PEM) | 09-C.H. Studs | 0 | |||
| EM-10-43 | Southco | 0 | ||||
| EM-10-42-410 | Southco | 0 | ||||
| AESH-M10-45 | PennEngineering (PEM) | 0 | ||||
| M-M10-45 | SHEREX FASTENING SO | 0 | ||||
![]() ECCO | GM104576 | ITT Interconnect Solutions |
| 37 | ||
![]() Flip Electronics | NSPM1041BMUTBG | onsemi | Stock, Ship Today RoHS : Compliant | 13,274 | ||
![]() Master Electronics | LTMM-104-01-L-D-SM | Samtec Inc | 2.00 mm Shrouded Terminal Strip RoHS : Compliant |
| 0 | |
| LTMM-104-02-F-D-RA-01 | Samtec Inc | 2.00 mm Shrouded Terminal Strip RoHS : Compliant |
| 0 | ||
| LTMM-104-02-L-D-SM-P | Samtec Inc | 2.00 mm Shrouded Terminal Strip RoHS : Compliant |
| 0 | ||
| LTMM-104-02-SM-D | Samtec Inc | 2.00 mm Shrouded Terminal Strip RoHS : Compliant |
| 0 | ||
| FTM-104-02-F-SV | Samtec Inc | Headers & Wire Housings RoHS : Compliant |
| 0 | ||
| DSPIC33EV32GM104-E/PT | Microchip Technology Inc | Microcontroller - dsPIC 33EV FuSa - 16-Bit - 60 MIPs - 35 I/O - 32KB (11K x 24) FLASH - 4K x 8 RAM - 4.5 to 5.5V - 44-TQFP (10x10). RoHS : Compliant |
| 0 | ||
| DSPIC33EV64GM104-I/ML | Microchip Technology Inc | Microcontroller - dsPIC 33EV FuSa - 16-Bit - 70 MIPs - 35 I/O - 64KB (22K x 24) FLASH - 8K x 8 RAM - 4.5 to 5.5V - 44-QFN (8x8). RoHS : Compliant |
| 0 | ||
| MTMM-104-02-F-S-045 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-104-02-F-S-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-104-02-F-S-126 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-104-02-L-D-004 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-104-02-L-D-130 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-104-02-L-Q-010 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-104-02-L-S-018 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-104-02-S-D-010 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE51OM1047 | Pasternack Enterprises | Key Specifications, Antenna Type: Omni, Polarization: ±45 Deg. Slant, Minimum Frequency: 3.3 GHz, Maximum Frequency: 3.8 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm. 8 dBi Omni Antenna 3,300-3,800 MHz N Type Female Connector., Pasternack’s PE51OM1047 is a high performance 5G / LTE outdoor 2 port omni directional antenna specifically designed for cellular networks, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 8 dBi omni Antenna operates within a range of 3.3 GHz-3.8 GHz and comes with N Type female Connector which is ideal for 5G, LTE, CDMA, LPWAN/IoT/M2M applications including LoRA, LTE-M, and NB-IOT. Manufactured to the highest international standards, our commercial grade, 2 port ±45 deg. slant polarized omni antenna with heavy duty steel mast mounting brackets and a lightweight pvc radome is ideally suited for all weather operation. Pasternack's type N connectorized PE51OM1047 antenna has a horizontal HPBW tolerance of Degrees and vertical HPBW tolerance of Degrees with 100 Watts max input power. The single band omni directional antenna has a type N female standard polarity threaded connector, gain nominal of 8 dBi gain and can be used to broadcast cellular LTE signals. The model 2 port PE51OM1047 designed specifically for the outdoors has an operational temperature between -40° to 60° deg C, and can withstand a wind velocity of up to 124.274 MPH. Ideal for point to multipoint use in large open areas such as base station installations or large campuses the antenna has an impedance of 50 Ohms and max input power of 100 Watts. The mounting pole diameter is between 1.18in - 2.16in, and operates on the 3500 MHz cellular band. Pasternack’s PE51OM1047 with pvc Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PE51OM1047 is a omni directional series antenna with a single band type and has a 8 dBi gain nominal. The included mounting bracket and hardware for this single band omni antenna with pvc radome, makes it very easy to install. The 2 port omni directional 3500 MHz band antenna with ±45 deg. slant polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 8 dBi omni directional 3.3 GHz-3.8 GHz N Type female connector antennas. Order our LTE outdoor omni directional antenna PE51OM1047, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 54 | |
| PE51OM1048 | Pasternack Enterprises | Key Specifications, Antenna Type: Omni, Polarization: ±45 Deg. Slant, Minimum Frequency: 3.3 GHz, Maximum Frequency: 3.8 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm. 13 dBi Omni Antenna 3,300-3,800 MHz N Type Female Connector., Pasternack’s PE51OM1048 is a high performance 5G / LTE outdoor 2 port omni directional antenna specifically designed for cellular networks, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 13 dBi omni Antenna operates within a range of 3.3 GHz-3.8 GHz and comes with N Type female Connector which is ideal for 5G, LTE, CDMA, LPWAN/IoT/M2M applications including LoRA, LTE-M, and NB-IOT. Manufactured to the highest international standards, our commercial grade, 2 port ±45 deg. slant polarized omni antenna with heavy duty steel mast mounting brackets and a lightweight pvc radome is ideally suited for all weather operation. Pasternack's type N connectorized PE51OM1048 antenna has a horizontal HPBW tolerance of Degrees and vertical HPBW tolerance of Degrees with 100 Watts max input power. The single band omni directional antenna has a type N female standard polarity threaded connector, gain nominal of 13 dBi gain and can be used to broadcast cellular LTE signals. The model 2 port PE51OM1048 designed specifically for the outdoors has an operational temperature between -40° to 60° deg C, and can withstand a wind velocity of up to 124.274 MPH. Ideal for point to multipoint use in large open areas such as base station installations or large campuses the antenna has an impedance of 50 Ohms and max input power of 100 Watts. The mounting pole diameter is between 1.18in - 2.16in, and operates on the 3500 MHz cellular band. Pasternack’s PE51OM1048 with pvc Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PE51OM1048 is a omni directional series antenna with a single band type and has a 13 dBi gain nominal. The included mounting bracket and hardware for this single band omni antenna with pvc radome, makes it very easy to install. The 2 port omni directional 3500 MHz band antenna with ±45 deg. slant polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 13 dBi omni directional 3.3 GHz-3.8 GHz N Type female connector antennas. Order our LTE outdoor omni directional antenna PE51OM1048, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 49 | ||
| PE51OM1046 | Pasternack Enterprises | Key Specifications, Antenna Type: Omni, Polarization: Vertical, Minimum Frequency: 3.3 GHz, Maximum Frequency: 3.8 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm. 10 dBi Omni Antenna 3,300-3,800 MHz N Type Female Connector., Pasternack’s PE51OM1046 is a high performance 5G / LTE outdoor omni directional proline antenna specifically designed for cellular networks, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 10 dBi omni Antenna operates within a range of 3.3 GHz-3.8 GHz and comes with N Type female Connector which is ideal for 5G, LTE, CDMA, LPWAN/IoT/M2M applications including LoRA, LTE-M, and NB-IOT. Manufactured to the highest international standards, our commercial grade, vertical polarized omni antenna with heavy duty steel mast mounting brackets and a lightweight fiberglass radome is ideally suited for all weather operation. Pasternack's type N connectorized PE51OM1046 antenna has a horizontal HPBW tolerance of Degrees and vertical HPBW tolerance of Degrees with 100 Watts max input power. The single band proline omni directional antenna has a type N female standard polarity threaded connector, gain nominal of 10 dBi gain and can be used to broadcast cellular LTE signals. The model PE51OM1046 designed specifically for the outdoors has an operational temperature between -40° to 60° deg C, and can withstand a wind velocity of up to 134.216 MPH. Ideal for point to multipoint use in large open areas such as base station installations or large campuses the antenna has an impedance of 50 Ohms and max input power of 100 Watts. The mounting pole diameter is between 1.18in - 2.36in, and operates on the 3500 MHz cellular band. Pasternack’s PE51OM1046 with white colored fiberglass Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PE51OM1046 is a omni directional proline series antenna with a single band type and has a 10 dBi gain nominal. The included mounting bracket and hardware for this single band omni antenna with fiberglass radome, makes it very easy to install. The proline omni directional 3500 MHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 10 dBi proline omni directional 3.3 GHz-3.8 GHz N Type female connector antennas. Order our LTE outdoor omni directional proline antenna PE51OM1046, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 35 | ||
| PE51OM1049 | Pasternack Enterprises | Key Specifications, Antenna Type: Omni, Polarization: ±45 Deg. Slant, Minimum Frequency: 3.3 GHz, Maximum Frequency: 3.8 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm. 12 dBi Omni Antenna 3,300-3,800 MHz N Type Female Connector., Pasternack’s PE51OM1049 is a high performance 5G / LTE outdoor 4 port omni directional antenna specifically designed for cellular networks, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 12 dBi omni Antenna operates within a range of 3.3 GHz-3.8 GHz and comes with N Type female Connector which is ideal for 5G, LTE, CDMA, LPWAN/IoT/M2M applications including LoRA, LTE-M, and NB-IOT. Manufactured to the highest international standards, our commercial grade, 4 port ±45 deg. slant polarized omni antenna with heavy duty steel mast mounting brackets and a lightweight uv resistance pvc radome is ideally suited for all weather operation. Pasternack's type N connectorized PE51OM1049 antenna has a horizontal HPBW tolerance of Degrees and vertical HPBW tolerance of Degrees with 50 Watts max input power. The single band omni directional antenna has a type N female standard polarity threaded connector, gain nominal of 12 dBi gain and can be used to broadcast cellular LTE signals. The model 4 port PE51OM1049 designed specifically for the outdoors has an operational temperature between -40° to 65° deg C, and can withstand a wind velocity of up to 210 MPH. Ideal for point to multipoint use in large open areas such as base station installations or large campuses the antenna has an impedance of 50 Ohms and max input power of 50 Watts. The mounting pole diameter is between 1.57in - 2.36in, and operates on the 3500 MHz cellular band. Pasternack’s PE51OM1049 with uv resistance pvc Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PE51OM1049 is a omni directional series antenna with a single band type and has a 12 dBi gain nominal. The included mounting bracket and hardware for this single band omni antenna with uv resistance pvc radome, makes it very easy to install. The 4 port omni directional 3500 MHz band antenna with ±45 deg. slant polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 12 dBi omni directional 3.3 GHz-3.8 GHz N Type female connector antennas. Order our LTE outdoor omni directional antenna PE51OM1049, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 33 | ||
| PE51OM1045 | Pasternack Enterprises | Key Specifications, Antenna Type: Omni, Polarization: Vertical/Horizontal, Minimum Frequency: 2.4 GHz, Maximum Frequency: 2.5 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm. 12 dBi Omni Antenna 2,400-2,500 MHz N Type Female Connector., Pasternack’s PE51OM1045 is a high performance 5G / LTE outdoor 2 port omni directional proline antenna specifically designed for cellular networks, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 12 dBi omni Antenna operates within a range of 2.4 GHz-2.5 GHz and comes with N Type female Connector which is ideal for 5G, LTE, CDMA, LPWAN/IoT/M2M applications including LoRA, LTE-M, and NB-IOT. Manufactured to the highest international standards, our commercial grade, 2 port vertical/horizontal polarized omni antenna with heavy duty steel mast mounting brackets and a lightweight pvc radome is ideally suited for all weather operation. Pasternack's type N connectorized PE51OM1045 antenna has a horizontal HPBW tolerance of Degrees and vertical HPBW tolerance of Degrees with 50 Watts max input power. The single band proline omni directional antenna has a type N female standard polarity threaded connector, gain nominal of 12 dBi gain and can be used to broadcast cellular LTE signals. The model 2 port PE51OM1045 designed specifically for the outdoors has an operational temperature between -40° to 60° deg C, and can withstand a wind velocity of up to 134.216 MPH. Ideal for point to multipoint use in large open areas such as base station installations or large campuses the antenna has an impedance of 50 Ohms and max input power of 50 Watts. The mounting pole diameter is between 1.18in - 2.36in, and operates on the 2400 MHz cellular band. Pasternack’s PE51OM1045 with white colored pvc Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PE51OM1045 is a omni directional proline series antenna with a single band type and has a 12 dBi gain nominal. The included mounting bracket and hardware for this single band omni antenna with pvc radome, makes it very easy to install. The 2 port proline omni directional 2400 MHz band antenna with vertical/horizontal polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 12 dBi proline omni directional 2.4 GHz-2.5 GHz N Type female connector antennas. Order our LTE outdoor omni directional proline antenna PE51OM1045, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 25 | ||
| PE51OM1044 | Pasternack Enterprises | Key Specifications, Antenna Type: Omni, Polarization: Vertical, Minimum Frequency: 2.5 GHz, Maximum Frequency: 2.7 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm. 12 dBi Omni Antenna 2,500-2,700 MHz N Type Female Connector., Pasternack’s PE51OM1044 is a high performance 5G / LTE outdoor omni directional proline antenna specifically designed for cellular networks, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 12 dBi omni Antenna operates within a range of 2.5 GHz-2.7 GHz and comes with N Type female Connector which is ideal for 5G, LTE, CDMA, LPWAN/IoT/M2M applications including LoRA, LTE-M, and NB-IOT. Manufactured to the highest international standards, our commercial grade, vertical polarized omni antenna with heavy duty steel mast mounting brackets and a lightweight fiberglass radome is ideally suited for all weather operation. Pasternack's type N connectorized PE51OM1044 antenna has a horizontal HPBW tolerance of Degrees and vertical HPBW tolerance of Degrees with 50 Watts max input power. The single band proline omni directional antenna has a type N female standard polarity threaded connector, gain nominal of 12 dBi gain and can be used to broadcast cellular LTE signals. The model PE51OM1044 designed specifically for the outdoors has an operational temperature between -40° to 60° deg C, and can withstand a wind velocity of up to 134.216 MPH. Ideal for point to multipoint use in large open areas such as base station installations or large campuses the antenna has an impedance of 50 Ohms and max input power of 50 Watts. The mounting pole diameter is between 1.18in - 2.36in, and operates on the 2500 MHz, 2600 MHz cellular band. Pasternack’s PE51OM1044 with white colored fiberglass Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PE51OM1044 is a omni directional proline series antenna with a single band type and has a 12 dBi gain nominal. The included mounting bracket and hardware for this single band omni antenna with fiberglass radome, makes it very easy to install. The proline omni directional 2500 MHz, 2600 MHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 12 dBi proline omni directional 2.5 GHz-2.7 GHz N Type female connector antennas. Order our LTE outdoor omni directional proline antenna PE51OM1044, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 19 | ||
| PE51OM1042 | Pasternack Enterprises | Key Specifications, Antenna Type: Omni, Polarization: Vertical, Minimum Frequency: 1.71 GHz, Maximum Frequency: 2.7 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Maximum Input VSWR: 2.3:1. 8 dBi Omni Antenna 1,710-2,700 MHz N Type Female Connector., Pasternack’s PE51OM1042 is a high performance 5G / LTE outdoor omni directional proline antenna specifically designed for cellular networks, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 8 dBi omni Antenna operates within a range of 1.71 GHz-2.7 GHz and comes with N Type female Connector which is ideal for 5G, LTE, CDMA, LPWAN/IoT/M2M applications including LoRA, LTE-M, and NB-IOT. Manufactured to the highest international standards, our commercial grade, vertical polarized omni antenna with heavy duty steel mast mounting brackets and a lightweight fiberglass radome is ideally suited for all weather operation. Pasternack's type N connectorized PE51OM1042 antenna has a horizontal HPBW tolerance of 360 Degrees and vertical HPBW tolerance of 17 Degrees with 50 Watts max input power. The single band proline omni directional antenna has a type N female standard polarity threaded connector, gain nominal of 8 dBi gain and can be used to broadcast cellular LTE signals. The model PE51OM1042 designed specifically for the outdoors has an operational temperature between -40° to 70° deg C, and can withstand a wind velocity of up to 124.27 MPH. Ideal for point to multipoint use in large open areas such as base station installations or large campuses the antenna has an impedance of 50 Ohms and max input power of 50 Watts. The mounting pole diameter is between 1.18in - 2.36in, and operates on the 1800 MHz, 1900 MHz, 2100 MHz, 2600 MHz cellular band. Pasternack’s PE51OM1042 with gray colored fiberglass Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PE51OM1042 is a omni directional proline series antenna with a single band type and has a 8 dBi gain nominal. The included mounting bracket and hardware for this single band omni antenna with fiberglass radome, makes it very easy to install. The proline omni directional 1800 MHz, 1900 MHz, 2100 MHz, 2600 MHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 8 dBi proline omni directional 1.71 GHz-2.7 GHz N Type female connector antennas. Order our LTE outdoor omni directional proline antenna PE51OM1042, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 18 | ||
| PE51OM1041 | Pasternack Enterprises | Key Specifications, Antenna Type: Omni, Polarization: Vertical, Minimum Frequency: 1.71 GHz, Maximum Frequency: 2.7 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Maximum Input VSWR: 2.3:1. 6 dBi Omni Antenna 1,710-2,700 MHz N Type Female Connector., Pasternack’s PE51OM1041 is a high performance 5G / LTE outdoor omni directional proline antenna specifically designed for cellular networks, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 6 dBi omni Antenna operates within a range of 1.71 GHz-2.7 GHz and comes with N Type female Connector which is ideal for 5G, LTE, CDMA, LPWAN/IoT/M2M applications including LoRA, LTE-M, and NB-IOT. Manufactured to the highest international standards, our commercial grade, vertical polarized omni antenna with heavy duty steel mast mounting brackets and a lightweight fiberglass radome is ideally suited for all weather operation. Pasternack's type N connectorized PE51OM1041 antenna has a horizontal HPBW tolerance of 360 Degrees and vertical HPBW tolerance of 25 Degrees with 50 Watts max input power. The single band proline omni directional antenna has a type N female standard polarity threaded connector, gain nominal of 6 dBi gain and can be used to broadcast cellular LTE signals. The model PE51OM1041 designed specifically for the outdoors has an operational temperature between -40° to 70° deg C, and can withstand a wind velocity of up to 124.27 MPH. Ideal for point to multipoint use in large open areas such as base station installations or large campuses the antenna has an impedance of 50 Ohms and max input power of 50 Watts. The mounting pole diameter is between 1.18in - 2.36in, and operates on the 1800 MHz, 1900 MHz, 2100 MHz, 2600 MHz cellular band. Pasternack’s PE51OM1041 with gray colored fiberglass Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PE51OM1041 is a omni directional proline series antenna with a single band type and has a 6 dBi gain nominal. The included mounting bracket and hardware for this single band omni antenna with fiberglass radome, makes it very easy to install. The proline omni directional 1800 MHz, 1900 MHz, 2100 MHz, 2600 MHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 6 dBi proline omni directional 1.71 GHz-2.7 GHz N Type female connector antennas. Order our LTE outdoor omni directional proline antenna PE51OM1041, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 16 | ||
| PE51OM1040 | Pasternack Enterprises | Key Specifications, Antenna Type: Omni, Polarization: Vertical, Minimum Frequency: 617 MHz, Maximum Frequency: 3.8 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm. 7 dBi Omni Antenna 617-3,800 MHz N Type Female Connector., Pasternack’s PE51OM1040 is a high performance 5G / LTE outdoor omni directional proline antenna specifically designed for cellular networks, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 6-7 dBi omni Antenna operates within a range of 617 MHz-3.8 GHz and comes with N Type female Connector which is ideal for 5G, LTE, CDMA, LPWAN/IoT/M2M applications including LoRA, LTE-M, and NB-IOT. Manufactured to the highest international standards, our commercial grade, vertical polarized omni antenna with heavy duty steel mast mounting brackets and a lightweight polycarbonate radome is ideally suited for all weather operation. The proline omni directional antenna with band 1 frequency range of 617 MHz to 960 MHz, gain of 6, VSWR max of 2:1 at F1; and band 2 with a frequency range of 1.71 GHz to 3.8 GHz, gain of 7 and VSWR max of 2.5:1 at F2, eliminates the need for different antennas and enable using the same antenna for a wide array of telecommunication applications where wide coverage is desired. Pasternack's type N connectorized PE51OM1040 antenna has a F1 HPBW Vertical Elevation of 43 Degrees, F2 HPBW Vertical Elevation of 22 Degrees and a HPBW Horizontal Azimuth of 360 Degrees with 50 Watts max input power. The single band proline omni directional antenna has a type N female standard polarity threaded connector, gain nominal of 6-7 dBi gain and can be used to broadcast cellular LTE signals. The model PE51OM1040 designed specifically for the outdoors has an operational temperature between -40° to 70° deg C, and can withstand a wind velocity of up to 134.21 MPH. Ideal for point to multipoint use in large open areas such as base station installations or large campuses the antenna has an impedance of 50 Ohms and max input power of 50 Watts. The mounting pole diameter is between 1.97in - 3.54in, and operates on the 600 MHz, 700 MHz, 800 MHz, 1800 MHz, 1900 MHz, 2100 MHz, 2600 MHz, 3500 MHz cellular band. Pasternack’s PE51OM1040 with white colored polycarbonate Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PE51OM1040 is a omni directional proline series antenna with a single band type and has a 6-7 dBi gain nominal. The included mounting bracket and hardware for this single band omni antenna with polycarbonate radome, makes it very easy to install. The proline omni directional 600 MHz, 700 MHz, 800 MHz, 1800 MHz, 1900 MHz, 2100 MHz, 2600 MHz, 3500 MHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 6-7 dBi proline omni directional 617 MHz-3.8 GHz N Type female connector antennas. Order our LTE outdoor omni directional proline antenna PE51OM1040, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 12 | ||
| PE51OM1043 | Pasternack Enterprises | Key Specifications, Antenna Type: Omni, Polarization: Vertical, Minimum Frequency: 1.71 GHz, Maximum Frequency: 2.7 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Maximum Input VSWR: 2.3:1. 10 dBi Omni Antenna 1,710-2,700 MHz N Type Female Connector., Pasternack’s PE51OM1043 is a high performance 5G / LTE outdoor omni directional proline antenna specifically designed for cellular networks, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 10 dBi omni Antenna operates within a range of 1.71 GHz-2.7 GHz and comes with N Type female Connector which is ideal for 5G, LTE, CDMA, LPWAN/IoT/M2M applications including LoRA, LTE-M, and NB-IOT. Manufactured to the highest international standards, our commercial grade, vertical polarized omni antenna with heavy duty steel mast mounting brackets and a lightweight fiberglass radome is ideally suited for all weather operation. Pasternack's type N connectorized PE51OM1043 antenna has a horizontal HPBW tolerance of 360 Degrees and vertical HPBW tolerance of 12 Degrees with 50 Watts max input power. The single band proline omni directional antenna has a type N female standard polarity threaded connector, gain nominal of 10 dBi gain and can be used to broadcast cellular LTE signals. The model PE51OM1043 designed specifically for the outdoors has an operational temperature between -40° to 70° deg C, and can withstand a wind velocity of up to 124.27 MPH. Ideal for point to multipoint use in large open areas such as base station installations or large campuses the antenna has an impedance of 50 Ohms and max input power of 50 Watts. The mounting pole diameter is between 1.18in - 2.36in, and operates on the 1800 MHz, 1900 MHz, 2100 MHz, 2600 MHz cellular band. Pasternack’s PE51OM1043 with gray colored fiberglass Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PE51OM1043 is a omni directional proline series antenna with a single band type and has a 10 dBi gain nominal. The included mounting bracket and hardware for this single band omni antenna with fiberglass radome, makes it very easy to install. The proline omni directional 1800 MHz, 1900 MHz, 2100 MHz, 2600 MHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 10 dBi proline omni directional 1.71 GHz-2.7 GHz N Type female connector antennas. Order our LTE outdoor omni directional proline antenna PE51OM1043, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 8 | ||
![]() Sager | MTMM-104-03-L-S-130 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 1,213 | |
| MTMM-104-03-G-D-125 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 967 | ||
| MTMM-104-02-T-D-080 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 832 | ||
| LTMM-104-01-L-D-SM | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Terminal Strip RoHS : Compliant |
| 0 | ||
| LTMM-104-02-F-D-RA-01 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Terminal Strip RoHS : Compliant |
| 0 | ||
| LTMM-104-02-L-D-SM-P | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| LTMM-104-02-SM-D | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Terminal Strip RoHS : Compliant |
| 0 | ||
| FTM-104-02-F-SV | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| REM10-4815S/A/CTRL | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 10W 36-75Vin 15Vout DIP24 RoHS : Compliant |
| 0 | ||
| PXC-M10-48WS24-A | TDK-Lambda Corporation | Isolated DC/DC Converters - Through Hole DC-DC, PCB Mount, Input 18-75VDC, Output 24V 0.416A, 10W RoHS : Compliant |
| 0 | ||
| MTMM-104-02-L-D-130 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-104-02-L-S-063 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-104-02-T-S-175 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-104-03-F-D-180 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
| MTMM-104-04-F-D-121 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
![]() TE Connectivity | FSM104 | TE Connectivity | FSM104=SPST-NO Contact Current Rating: 50 mA Actuator Style: Round Actuator Operating Function: NO Contact Base Material: Brass Switch Contact Plating Material: Silver Tactile Switch | 50 mA Round Actuator Brass | Part Number: FSM104 | Internal Number: 1437565-6 | TE Connectivity RoHS : Compliant |
| 492 | |
![]() Venkel Ltd. | TA050TCM104MAR | VENKEL LTD | Tantalum Chip Capacitor;50V;TCM;0.1uF;�20%;A RoHS : Compliant | 0 | ||
| TA050TCM104KAR | VENKEL LTD | Tantalum Chip Capacitor;50V;TCM;0.1uF;�10%;A RoHS : Compliant | 0 | |||
| SVM1045VB-UVL | VENKEL LTD | Rectifier;TO-277;45V;10A RoHS : Not Compliant | 0 | |||
| TA035TCM104MAR | VENKEL LTD | Tantalum Chip Capacitor;35V;TCM;0.1uF;�20%;A RoHS : Compliant | 0 | |||
| SVM1045V-UVL | VENKEL LTD | Rectifier;TO-277;45V;10A RoHS : Not Compliant | 0 | |||
| TA035TCM104KAR | VENKEL LTD | Tantalum Chip Capacitor;35V;TCM;0.1uF;�10%;A RoHS : Compliant | 0 | |||
![]() Vyrian | DSPIC33EV64GM104-I/ML | Microchip Technology Inc | 16-Bit Size, 0-Ext Bit, 40MHz, CMOS, PQCC44 RoHS : Compliant | 12,614 | ||
| P16NM104MAB15 | Vishay Intertechnologies | Potentiometer, Cermet, 1W, 100000ohm, 316V, 20% +/-Tol, 150ppm/Cel, 1 Turn(s) RoHS : Compliant | 12,154 | |||
| STMM-104-01-G-D-SM-LC | Samtec Inc | Board Connector, 8 Contact(s), 2 Row(s), Male, Straight, 0.078 inch Pitch, Surface Mount Terminal, Black Insulator RoHS : Compliant | 12,015 | |||
| LTMM-104-01-L-D-SM | Samtec Inc | Board Connector, 8 Contact(s), 2 Row(s), Male, Straight, 0.078 inch Pitch, Solder Terminal, Black Insulator RoHS : Compliant | 11,814 | |||
| TSM-104-01-S-DV-P | Samtec Inc | Board Connector, 8 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle RoHS : Compliant | 11,748 | |||
| TSM-104-01-T-SV-A | Samtec Inc | Board Connector, 4 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Surface Mount Terminal, Locking, Black Insulator RoHS : Compliant | 11,742 | |||
| TMM-104-01-F-D-SM-003-P | Samtec Inc | Board Connector, 8 Contact(s), 2 Row(s), Male, Straight, 0.078 inch Pitch, Surface Mount Terminal, Black Insulator RoHS : Compliant | 11,723 | |||
| MTMM-104-06-S-D-225 | Samtec Inc | Board Stacking Connector, 8 Contact(s), 2 Row(s), Male, Straight, Solder Terminal RoHS : Compliant | 11,700 | |||
| TMM-104-01-S-S-SM-P-TR | Samtec Inc | Board Connector, 4 Contact(s), 1 Row(s), Male, Straight, 0.079 inch Pitch, Surface Mount Terminal, Black Insulator RoHS : Compliant | 10,853 | |||
| DSPIC33EV256GM104T-I/P8 | Microchip Technology Inc | 16-Bit Size, 0-Ext Bit, 40MHz, CMOS, PQFP48 RoHS : Compliant | 9,818 | |||
BUK7M10-40EX![]() | Nexperia | Power Field-Effect Transistor, 56A I(D), 40V, 0.01ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 9,050 | |||
TSM104WIPWRE4![]() | Texas Instruments | Operational Amplifier, 4 Func, 6000uV Offset-Max, BIPolar, PDSO16 RoHS : Compliant | 7,169 | |||
| TMM-104-03-L-S | Samtec Inc | Board Connector, 4 Contact(s), 1 Row(s), Male, Straight, 0.079 inch Pitch, Solder Terminal, Locking, Black Insulator RoHS : Compliant | 6,920 | |||
| CLM-104-02-F-D-PA | Samtec Inc | Board Connector, 8 Contact(s), 2 Row(s), Female, Straight, 0.039 inch Pitch, Surface Mount Terminal, Black Insulator, Plug RoHS : Compliant | 6,361 | |||
TSM104WIDG4![]() | Texas Instruments | Operational Amplifier, 4 Func, 6000uV Offset-Max, BIPolar, PDSO16 RoHS : Compliant | 4,682 | |||
![]() Win Source Electronics | TSM-104-01-T-SV-P-TR | Samtec Inc | CONN HEADER SMD 4POS 2.54MM RoHS : Compliant |
| 7,700 | |
| RN2483A-I/RM104 | Microchip Technology Inc | RF TXRX MOD ISM<1GHZ CAST SMD RoHS : Compliant |
| 1,635 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |