Datenblatt-Suchmaschine für elektronische Bauteile
  German  ▼
ALLDATASHEETDE.COM

X  



S12O2B Verteiler

VerteilerTeilenummerHerstellerBauteilbeschribungPriceQty.
BuyNow

Pasternack Enterprises US
PE3C1490/HS-12

Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 12 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 12 inch length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C1490/HS-12 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1490/HS-12 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C1490/HS-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1490/HS-12 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $154.99
10 : $151.89
25 : $148.79
100 : $145.69
1,554
PE3C4529/HS-12

Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Female Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly N male to N female low loss cable 12 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 12 inch length using LMR-240-UF coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3C4529/HS-12, can also be known as a low loss type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C4529/HS-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4529/HS-12 can also be used in the other direction and will be type N female to N type male cable assembly if the opposite connectivity is required. Low loss N type plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female low loss cable 12 inch length using LMR-240-UF coax with heatshrink.
1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91
922
PE39437/HS-12

Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Cable 12 Inch Length Using PE-SR402FLJ Coax with HeatShrink., Radio frequency assembly SMA male to SMA male cable 12 inch length using PE-SR402FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 12 inch length using PE-SR402FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE39437/HS-12 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE39437/HS-12 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE39437/HS-12 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.
1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47
434
PE3W05740/HS-12

Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female to SMP Female Right Angle Cable 12 Inch Length Using PE-SR405FL Coax with HeatShrink., Pasternack’s PE3W05740/HS-12 SMA female to right angle SMP female RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and a right angle SMP cable connection on the other. Our SMA to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3W05740/HS-12 can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our SMA female to right angle SMP female cable has a maximum VSWR of 1.4:1. This PE3W05740/HS-12 SMA jack to SMP jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3W05740/HS-12 can also be used in the other direction and will be a right angle SMP female to SMA female cable assembly if the opposite connectivity is required. This SMA jack to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements.
1 : $123.99
10 : $119.03
25 : $114.07
100 : $109.11
157
PE3W08804/HS-12

Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to Reverse Polarity SMA Jack Bulkhead Cable 12 Inch Length Using RG142 Coax with HeatShrink., Radio frequency assembly SMA male to reverse polarity SMA jack bulkhead cable 12 inch length using RG142 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to reverse polarity SMA jack bulkhead cable 12 inch length using RG142 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our SMA to reverse polarity SMA cable assemblies have a male gender on end 1 and jack on end 2. PE3W08804/HS-12 can also be known as a SMA plug to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity SMA female cable assembly PE3W08804/HS-12 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to reverse polarity SMA jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08804/HS-12 can also be used in the other direction and will be reverse polarity SMA jack bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA reverse polarity female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity SMA jack bulkhead cable 12 inch length using RG142 coax with heatshrink.
1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11
114
PE3W18579/HS-12

Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. RP SMA Plug Right Angle to RP SMA Jack Bulkhead Low Loss Cable 12 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly RP SMA plug right angle to RP SMA jack bulkhead low loss cable 12 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The RP SMA plug right angle to RP SMA jack bulkhead low loss cable 12 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle reverse polarity SMA cable connection on one end and a reverse polarity SMA bulkhead cable connection on the other. Our low loss right angle reverse polarity SMA to reverse polarity SMA cable assembly has a plug gender on end 1 and a jack on end 2. PE3W18579/HS-12 can also be known as a low loss right angle reverse polarity SMA male to reverse polarity SMA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18579/HS-12 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Reverse polarity SMA male to reverse polarity SMA female cable assembly PE3W18579/HS-12 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18579/HS-12 can also be used in the other direction and will be a reverse polarity SMA jack bulkhead to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity right angle male to SMA reverse polarity female bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $156.99
10 : $150.71
25 : $144.43
100 : $138.15
114
PE3C3508/HS-12

Pasternack Enterprises Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male Right Angle to BNC Male Cable 12 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly BNC male right angle to BNC male cable 12 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male right angle to BNC male cable 12 inch length using RG316-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and BNC cable connection on the other. Our right angle BNC to BNC cable assembly has male gender on end 1 and male on end 2. PE3C3508/HS-12 can also be known as a right angle BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.600 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. BNC plug to BNC plug cable assembly PE3C3508/HS-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C3508/HS-12 RF cable are available on our downloadable PDF datasheet.PE3C3508/HS-12 can also be used in the other direction and will be BNC male to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements.
1 : $128.99
25 : $122.54
50 : $116.09
100 : $110.93
0
PE3C6040/HS-12

Pasternack Enterprises Key Specifications, Connector 1 Series: Trimmed Lead, Connector 1 Gender: Hermaphroditic, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Trimmed Lead to SMA Male Cable 12 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly trimmed lead to SMA male cable 12 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The trimmed lead to SMA male cable 12 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom trimmed lead to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a trimmed lead cable connection on one end and a SMA cable connection on the other. Our trimmed lead to SMA cable assembly has a sexless gender on end 1 and a male on end 2. PE3C6040/HS-12 can also be known as a trimmed lead sexless to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3C6040/HS-12 RF cable has a FEP jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. Trimmed lead sexless to SMA plug cable assembly PE3C6040/HS-12 is built with RG316 which is a flexible coax type. The Pasternack flexible Trimmed Lead cable assembly is manufactured with trimmed lead to SMA cable connectors, has a impedance, and is single shielded. One connector features the crimp/solder attachment method, while the other has the crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C6040/HS-12 can also be used in the other direction and will be a SMA male to trimmed lead sexless cable assembly if the opposite connectivity is required. Trimmed lead sexless to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality trimmed lead to SMA cable assembly for quick shipment worldwide. Variations of trimmed lead and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Trimmed Lead to SMA RF cable assembly as per your requirements.
1 : $44.29
25 : $42.08
50 : $39.86
100 : $38.09
0
PE3C6547/HS-12

Pasternack Enterprises Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MMCX Plug Right Angle to Limited Detent SMP Male Bulkhead Cable 12 Inch Length Using PE-P086 Coax with HeatShrink., Radio frequency assembly MMCX plug right angle to limited detent SMP male bulkhead cable 12 inch length using PE-P086 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to limited detent SMP male bulkhead cable 12 inch length using PE-P086 coax with heatshrink, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and SMP bulkhead cable connection on the other. Our right angle MMCX to SMP cable assemblies have a plug gender on end 1 and male on end 2. PE3C6547/HS-12 can also be known as a right angle MMCX male to SMP plug cable assembly and will be shipped same-day as it is purchased. MMCX male to SMP plug cable assembly PE3C6547/HS-12 is built with PE-P086 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to SMP cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to SMP male bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6547/HS-12 can also be used in the other direction and will be SMP male bulkhead to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to SMP plug bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMP cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to limited detent SMP male bulkhead cable 12 inch length using PE-P086 coax with heatshrink.
1 : $160.99
25 : $152.94
50 : $144.89
100 : $138.45
0
PE3W02910LF/HS-12

Pasternack Enterprises Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMB Plug Right Angle to SMA Male Low Loss Cable 12 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly SMB plug right angle to SMA male low loss cable 12 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB plug right angle to SMA male low loss cable 12 inch length using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMB cable connection on one end and a SMA cable connection on the other. Our low loss right angle SMB to SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3W02910LF/HS-12 can also be known as a low loss right angle SMB male to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02910LF/HS-12 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our right angle SMB plug to SMA male cable has a maximum VSWR of 1.4:1. SMB male to SMA plug cable assembly PE3W02910LF/HS-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W02910LF/HS-12 can also be used in the other direction and will be a SMA male to right angle SMB plug cable assembly if the opposite connectivity is required. Low loss SMB right angle male to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59
0
PE3W09153/HS-12

Pasternack Enterprises Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female Right Angle to SMA Female Cable 12 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly SMP female right angle to SMA female cable 12 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to SMA female cable 12 inch length using PE-SR405FLJ coax with heatshrink, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and SMA cable connection on the other. Our right angle SMP to SMA cable assemblies have a female gender on end 1 and female on end 2. PE3W09153/HS-12 can also be known as a right angle SMP jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA jack cable assembly PE3W09153/HS-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with right angle SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP right angle female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09153/HS-12 can also be used in the other direction and will be SMA female to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMA female cable 12 inch length using PE-SR405FLJ coax with heatshrink.
1 : $154.99
25 : $147.24
50 : $139.49
100 : $133.29
0
PE3W12386/HS-12

Pasternack Enterprises Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male to SMA Male Cable 12 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly TNC male to SMA male cable 12 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to SMA male cable 12 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and a SMA cable connection on the other. Our TNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W12386/HS-12 can also be known as a TNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W12386/HS-12 RF cable has a FEP jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. Our TNC male to SMA male cable has a maximum VSWR of 1.5:1. TNC plug to SMA plug cable assembly PE3W12386/HS-12 is built with RG316 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W12386/HS-12 can also be used in the other direction and will be a SMA male to TNC male cable assembly if the opposite connectivity is required. TNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA RF cable assembly as per your requirements.
1 : $74.89
25 : $71.15
50 : $67.4
100 : $64.41
0
PE3704/HS-12

Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Cable 12 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly SMA male to SMA male cable 12 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 12 inch length using RG316-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3704/HS-12 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.57-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3704/HS-12 RF cable has a FEP jacket of 0.114-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 85 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3704/HS-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.
1 : $54.59
25 : $51.86
50 : $49.13
100 : $46.95
0
PE37534/HS-12

Pasternack Enterprises Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MCX Plug Right Angle to SMA Female Cable 12 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly MCX plug right angle to SMA female cable 12 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to SMA female cable 12 inch length using RG316-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MCX cable connection on one end and a SMA cable connection on the other. Our right angle MCX to SMA cable assembly has a plug gender on end 1 and a female on end 2. PE37534/HS-12 can also be known as a right angle MCX male to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.57-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE37534/HS-12 RF cable has a FEP jacket of 0.114-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 85 dB. Our right angle MCX plug to SMA female cable has a maximum VSWR of 1.5:1. MCX male to SMA jack cable assembly PE37534/HS-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE37534/HS-12 can also be used in the other direction and will be a SMA female to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA RF cable assembly as per your requirements.
1 : $136.99
25 : $130.14
50 : $123.29
100 : $117.81
0
PE3982/HS-12

Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to TNC Male Cable 12 Inch Length Using RG393 Coax with HeatShrink., Radio frequency assembly N male to TNC male cable 12 inch length using RG393 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to TNC male cable 12 inch length using RG393 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our type N to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3982/HS-12 can also be known as a type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3982/HS-12 RF cable has a FEP jacket of 0.390-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3982/HS-12 is built with RG393 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3982/HS-12 can also be used in the other direction and will be a TNC male to type N male cable assembly if the opposite connectivity is required. Type N plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC RF cable assembly as per your requirements.
1 : $171.99
25 : $163.39
50 : $154.79
100 : $147.91
0

Venkel Ltd.
CRS1206-4W-1003FT

VENKEL LTD Anti-Sulfuration CR;1206;1/4W;100K ;�1%
RoHS : Compliant
0
CRS1206-4W-1210FT

VENKEL LTD Anti-Sulfuration CR;1206;1/4W;121R;�1%
RoHS : Compliant
0
CRS1206-4W-134JT

VENKEL LTD Anti-Sulfuration CR;1206;1/4W;130K;�5%
RoHS : Compliant
0
CRS1206-4W-1373FT

VENKEL LTD Anti-Sulfuration CR;1206;1/4W;137K;�1%
RoHS : Compliant
0
CRS1206-4W-1580FT

VENKEL LTD Anti-Sulfuration CR;1206;1/4W;158R;�1%
RoHS : Compliant
0
CRS1206-4W-1742FT

VENKEL LTD Anti-Sulfuration CR;1206;1/4W;17.4K;�1%
RoHS : Compliant
0
CRS1206-4W-1823FT

VENKEL LTD Anti-Sulfuration CR;1206;1/4W;182K ;�1%
RoHS : Compliant
0
CRS1206-4W-2101FT

VENKEL LTD Anti-Sulfuration CR;1206;1/4W;2.1K;�1%
RoHS : Compliant
0
CRS1206-4W-2552FT

VENKEL LTD Anti-Sulfuration CR;1206;1/4W;25.5K;�1%
RoHS : Compliant
0
CRS1206-4W-31R6FT

VENKEL LTD Anti-Sulfuration CR;1206;1/4W;31.6R;�1%
RoHS : Compliant
0
CRS1206-4W-3650FT

VENKEL LTD Anti-Sulfuration CR;1206;1/4W;365R;�1%
RoHS : Compliant
0
CRS1206-4W-4992FT

VENKEL LTD Anti-Sulfuration CR;1206;1/4W;49.9K;�1%
RoHS : Compliant
0
CRS1206-4W-6981FT

VENKEL LTD Anti-Sulfuration CR;1206;1/4W;6.98K;�1%
RoHS : Compliant
0
CRS1206-4W-7502FT

VENKEL LTD Anti-Sulfuration CR;1206;1/4W;75K;�1%
RoHS : Compliant
0
CRS1206-4W-7872FT

VENKEL LTD Anti-Sulfuration CR;1206;1/4W;78.7K;�1%
RoHS : Compliant
0

Vyrian
PDSE1-S12-S12-M-TR

CUI Inc DC-DC Unregulated Power Supply Module, 1 Output, 1W, Hybrid
RoHS : Compliant
18,000
YS1221500000G

Amphenol Corporation Barrier Strip Terminal Block, 10A, 1.31mm2, 2 Row(s), 2 Deck(s)
RoHS : Compliant
13,355
Y92E-S12PP4A5M

OMRON Corporation Circular Connector, 4 Contact(s), Female, Wire Terminal
11,905
PDS1-S12-S12-S

CUI Inc DC-DC Unregulated Power Supply Module, 1 Output, 1W, Hybrid
RoHS : Compliant
9,914
S9S12XS128J1MALR

NXP Semiconductors Microcontroller, 16-Bit, FLASH, CPU12 CPU, 40MHz, CMOS, PQFP112
RoHS : Compliant
8,013
S9S12XS128J1CAL

NXP Semiconductors Microcontroller, 16-Bit, FLASH, CPU12 CPU, 40MHz, CMOS, PQFP112
RoHS : Compliant
5,386
S9S12XS128J1VAAR

NXP Semiconductors Microcontroller, 16-Bit, FLASH, CPU12 CPU, 40MHz, CMOS, PQFP80
RoHS : Compliant
5,069
MC9S12XS128MAE

NXP Semiconductors Microcontroller, 16-Bit, FLASH, CPU12 CPU, 40MHz, CMOS, PQFP64
RoHS : Compliant
4,367
S9S12XS128J1MAAR

NXP Semiconductors Microcontroller, 16-Bit, FLASH, CPU12 CPU, 40MHz, CMOS, PQFP80
RoHS : Compliant
4,144
HS12-100P0S/12PS30

Microchip Technology Inc Microprocessor Circuit, CMOS, PDSO20
RoHS : Compliant
3,659
S9S12XS128J1CAA

NXP Semiconductors Microcontroller, 16-Bit, FLASH, CPU12 CPU, 40MHz, CMOS, PQFP80
RoHS : Compliant
3,607
S9S12XS128J1CALR

NXP Semiconductors Microcontroller, 16-Bit, FLASH, CPU12 CPU, 40MHz, CMOS, PQFP112
RoHS : Compliant
2,779
NCS12S1212C

Murata Manufacturing DC-DC Regulated Power Supply Module
843
NCS12S1215C

Murata Manufacturing DC-DC Regulated Power Supply Module
719
ULS-12/8.3-D48N-C

Murata Manufacturing DC-DC Regulated Power Supply Module
626

Waytek, Inc.
871-1A-S 12VDC

Song Chuan Precision Company Song Chuan Micro Relay 35A 12V SPST PN 871-1A-S-12VDC(Waytek DISC)
1 : $1.8724
10 : $1.8415
50 : $1.8003
100 : $1.7694
500 : $1.7488
1,000 : $1.7179
10,190
SS12A1T

Amphenol Sine Systems Amphenol Sine Systems SS12A1T stamped and formed female socket terminal is a tin-plated RADSOK contact for 14-12 Ga. wire. Built from copper alloy, it supports MagnaMate ATHP connector assemblies requiring a loose socket terminal.
1 : $0.3175
10 : $0.3175
50 : $0.3065
100 : $0.3065
200 : $0.2956
500 : $0.2956
4,034
SS12A1T

Amphenol Sine Systems Stamped & Formed 14-12 Ga, 2.5mm, Tin, Female Reel disc way, no repl
1,000 : $0.3234
5,000 : $0.3124
4,000
A171AHS12VDC.96

CIT Relay & Switch 280 Relay, 30A, SPST, 12VDC
1 : $3.1687
10 : $2.8134
50 : $2.519
100 : $2.3159
500 : $2.2042
1,000 : $2.0925
1,249
A171AHS12VDC.96R

CIT Relay & Switch 280 Relay, 30A,SPST w/Resistor 12VDC
1 : $3.388
10 : $3.0224
50 : $2.7076
100 : $2.4842
500 : $2.342
1,000 : $2.2505
1,074
YPS121212

Thomas & Betts Thomas & Betts Harnessflex YPS121212 hinged Y fitting is a conduit branch fitting with .350" left, center, and right openings for corrugated loom routing. Its hinged Y design supports smooth harness branching while maintaining organized conduit protection in vehicle and equipment wiring applications.
1 : $4.2453
50 : $3.7842
100 : $3.4344
200 : $3.3231
500 : $3.2118
1,000 : $3.0846
936
A171AS12VDC.96D

CIT Relay & Switch 280 Relay, 20A,SPST w/Diode 12VDC
1 : $3.1286
10 : $2.7409
50 : $2.4196
100 : $2.1979
500 : $2.076
1,000 : $1.9542
923
TPS121212

Thomas & Betts Thomas & Betts Harnessflex TPS121212 hinged tee fitting is a conduit branch fitting with .350" left, center, and right openings for corrugated loom routing. Its hinged tee design supports clean three-way harness branching while maintaining organized conduit protection in vehicle and equipment wiring applications.
1 : $4.1118
50 : $3.6652
100 : $3.3264
200 : $3.2186
500 : $3.1108
1,000 : $2.9876
887
A171AS12VDC.96

CIT Relay & Switch 280 Relay, 20A, SPST, 12VDC
1 : $2.3486
10 : $2.2591
50 : $2.1809
100 : $2.0692
500 : $1.8679
1,000 : $1.8009
559
A171AHS12VDC.96D

CIT Relay & Switch 280 Relay, 30A, SPST w/Diode 12VDC
1 : $3.388
10 : $3.0224
50 : $2.7076
100 : $2.4842
500 : $2.342
1,000 : $2.2505
370
A171AS12VDC.96R

CIT Relay & Switch 280 Relay, 20A,w/Resistor 12VDC
1 : $3.1286
10 : $2.7409
50 : $2.4196
100 : $2.1979
500 : $2.076
1,000 : $1.9542
348
171-S1-200-2

MP Mechanical Products 171-S1-200-2 is a surface-mount circuit breaker, automatic reset, 1/4" Stud, 200A, 30VDC. Additional details include interrupt capacity SAE J1625, ABYC-E11, SAE J1171 compliant, ignition protected, and IP67 dust- and waterproof ingress protection.
1 : $20.76
5 : $19.93
10 : $19.09
50 : $18.4
100 : $17.84
200 : $17.42
309
175-S1-200-2

MP Mechanical Products 175-S1-200-2 is a surface-mount circuit breaker, push/trip reset, 1/4" studs, 200A, 30VDC. Additional details include interrupt capacity SAE J1625, ABYC-E11, SAE J1171 compliant, ignition protected, and IP67 dust- and waterproof ingress protection.
1 : $40.54
5 : $36.17
10 : $33.91
50 : $32.01
100 : $30.49
200 : $28.99
81
174-S1-200-2

MP Mechanical Products 174-S1-200-2 is a surface-mount circuit breaker, manual reset, 1/4" studs, 200A, 30VDC. Additional details include interrupt capacity SAE J1625, ABYC-E11, SAE J1171 compliant, ignition protected, and IP67 dust- and waterproof ingress protection.
1 : $34.6
5 : $30.88
10 : $28.94
50 : $27.32
100 : $26.03
200 : $24.74
68
875-S1-200-2

MP Mechanical Products 875S12002 is a marine-rated surface-mount high-amp circuit breaker, Type III, 200A 48VDC. Additional details include IP66 ingress protection, mounting with #10 or M5 screw, and SAE J1171 ignition protection.
1 : $53.4
5 : $50.34
10 : $48.67
50 : $46.44
100 : $44.22
57

Win Source Electronics
BSS123W-7-F

Diodes Incorporated Trans MOSFET N-CH 100V 0.17A 3-Pin SOT-323 T/R / MOSFET N-CH 100V 170MA SC70-3
RoHS : Compliant
146 : $2.0657
117 : $2.1497
90 : $2.2336
63 : $2.4016
41 : $2.4855
19 : $2.6535
71,564
ADS1292RIRSMR

Texas Instruments AFE General Purpose 2 ADC 24bit 1.8V/3V 32-Pin VQFN EP T/R / IC AFE 24BIT 8KSPS 2CH 32VQFN
RoHS : Compliant
50 : $6.0092
40 : $6.2535
31 : $6.4978
22 : $6.9863
14 : $7.2306
7 : $7.7191
57,142
ADS1220IRVAR

Texas Instruments Low-Power, Low-Noise, 24-Bit, ADC for Small-Signal Sensors | IC ADC 24BIT SIGMA-DELTA 16VQFN
RoHS : Compliant
135 : $2.2364
108 : $2.3273
83 : $2.4182
58 : $2.6
38 : $2.691
18 : $2.8728
28,180
ADS1232IPWR

Texas Instruments IC ADC 24-BIT 10/80SPS 24-TSSOP
RoHS : Compliant
211 : $1.4272
169 : $1.4852
130 : $1.5433
91 : $1.6593
59 : $1.7173
28 : $1.8333
20,000
ADS1247

Texas Instruments 24-Bit Analog-to-Digital Converters for Temperature Sensors
50 : $6.7272
38 : $7.5033
29 : $7.762
21 : $8.0208
14 : $8.2796
6 : $10.0906
19,200
ADS1251U/2K5

Texas Instruments 1-Channel Single ADC Delta-Sigma 20ksps 24-bit Serial 8-Pin SOIC T/R / IC ADC CONV 24BIT LP 8-SOIC
RoHS : Compliant
46 : $6.5228
37 : $6.7879
29 : $7.0531
20 : $7.5834
13 : $7.8485
6 : $8.3788
9,300
ADS1255IDBRG4

Texas Instruments Very Low Noise, 24-Bit Analog-to-Digital Converter
RoHS : Compliant
63 : $5.346
51 : $5.5633
39 : $5.7805
28 : $6.2152
18 : $6.4325
9 : $6.8672
7,600
VS-50TPS12L-M3

Vishay Huntington SCR STANDARD 1200V 50A TO-247L
205 : $1.4672
153 : $1.6365
119 : $1.693
86 : $1.7494
56 : $1.8058
23 : $2.2008
7,171
TB67S128FTG(O,EL)

Toshiba America Electronic Components IC MTR DRVR BIPOLAR 0-5.5V 64QFN / Bipolar Motor Driver Power MOSFET Parallel 64-VQFN (9x9)
RoHS : Compliant
89 : $3.3986
66 : $3.7907
52 : $3.9214
38 : $4.0522
24 : $4.1829
10 : $5.0979
3,959
DS1233Z-10+T&R

Maxim Integrated Products IC 4.375V 10% SOT223-3
RoHS : Compliant
136 : $2.2204
101 : $2.4766
79 : $2.562
57 : $2.6474
37 : $2.7328
16 : $3.3306
2,755
AD2S1210BST

Analog Devices Inc Resolver-to-Digital Converter 10-16 Bit 44-LQFP
21 : $14.8855
16 : $16.6031
12 : $17.1756
9 : $17.7481
6 : $18.3207
3 : $22.3283
2,198
AD2S1210ASTZ-RL7

Analog Devices Inc IC R/D CONV 10/12/14/16B 48LQFP
RoHS : Compliant
5 : $62.5564
4 : $69.7745
3 : $72.1805
2 : $74.5865
1 : $76.9925
600
ADS125H02IRHBT

Texas Instruments IC ADC 24BIT SIGMA-DELTA 32VQFN
RoHS : Compliant
21 : $14.7728
16 : $16.4773
12 : $17.0455
9 : $17.6137
6 : $18.1819
3 : $22.1591
550
ADS1210U/1K

Texas Instruments IC 24-BIT 1 CHAN A/D 18-SOIC
RoHS : Compliant
16 : $19.5489
12 : $21.8046
9 : $22.5564
7 : $23.3083
5 : $24.0602
2 : $29.3234
250
AVS12CB

STMicroelectronics TRIAC INT TRIGGER 600V TO220AB
RoHS : Compliant
61 : $4.9619
46 : $5.5344
35 : $5.7252
26 : $5.9161
17 : $6.1069
7 : $7.4428
122

Link URL



War ALLDATASHEET hilfreich?  [ DONATE ]  

Über Alldatasheet   |   Werbung   |   Kontakt   |   Privatsphäre und Datenschutz   |   Link zum Datenblatt    |   Linktausch   |   Hersteller
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com