| Datenblatt-Suchmaschine für elektronische Bauteile |
|
S18FCJ-R Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
![]() TME | TS18-5-17-SL-160-SMT-TR![]() | Same Sky | Microswitch TACT; SPST-NO; Pos: 2; 0.05A/12VDC; SMT; none; 1.6N RoHS : Compliant |
| 4,000 | |
| BV302S18018 | ZETTLER Magnetics Inc | Transformer: encapsulated; 1.8VA; 230VAC; 18V; 100mA; PCB |
| 473 | ||
| CF2WS-180K | SR Components Inc | Resistor: carbon film; 180kΩ; THT; 2W; ±5%; 500V; Ø0.7x35mm; axial |
| 400 | ||
| BV382S18032 | ZETTLER Magnetics Inc | Transformer: encapsulated; 3.2VA; 230VAC; 18V; 178mA; PCB |
| 103 | ||
| 382A012-25-CS-1821-0 | TE Connectivity | 382A012-25-CS-1821-0 |
| 100 | ||
| BAV102-GS18 | Vishay Intertechnologies | Diode: switching; SMD; 120V; 250mA; 50ns; MiniMELF,SOD80; Ufmax: 1V RoHS : Compliant |
| 0 | ||
| BZT55B6V2-GS18 | Vishay Intertechnologies | Diode: Zener; 0.5W; 6.2V; SMD; SOD80; single diode RoHS : Compliant |
| 0 | ||
TS18-5-20-SL-160-SMT-TR![]() | Same Sky | Microswitch TACT; SPST-NO; Pos: 2; 0.05A/12VDC; SMT; none; 1.6N RoHS : Compliant |
| 0 | ||
| TS18115C0000G | Amphenol Anytek | Connector: pluggable terminal block; plug; female; power supply |
| 0 | ||
| TZMB24-GS18 | Vishay Intertechnologies | Diode: Zener; 0.5W; 24V; SMD; MiniMELF,SOD80; single diode RoHS : Compliant |
| 0 | ||
| TZMB6V2-GS18 | Vishay Intertechnologies | Diode: Zener; 0.5W; 6.2V; SMD; MiniMELF,SOD80; single diode RoHS : Compliant |
| 0 | ||
| TZMC43-GS18 | Vishay Intertechnologies | Diode: Zener; 0.5W; 43V; SMD; MiniMELF,SOD80; single diode RoHS : Compliant |
| 0 | ||
| E57PS-18SNN5-Q | Eaton Corporation | Sensor: inductive; OUT: NPN / NO; 0÷5mm; 10÷48VDC; M18; IP67; 300mA RoHS : Compliant |
| 0 | ||
| 720LS/18 | Beta Electric | Socket: 6-angles; socket spanner,impact; HEX 18mm; 1/2"; long |
| 0 | ||
| ZMY5V6-GS18 | Vishay Intertechnologies | Diode: Zener; 1W; 5.6V; SMD; DO213AB,MELF glass; single diode; ZMY RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | STRVS185X02B | STMicroelectronics | Diode TVS Single Uni-Dir 128V 2-Pin DO-214AA T/R - Tape and Reel (Alt: STRVS185X02B) RoHS : Compliant |
| 25,000 | |
| ECS-184-18-5PX-TR | ECS International Inc | - Tape and Reel (Alt: ECS-184-18-5PX-TR) RoHS : Compliant |
| 5,000 | ||
| SQS180ENW-T1_GE3 | Vishay Intertechnologies | Automotive N-Channel 40 V (D-S) 175C MOSFET PowerPAK 1212-8SLW - Tape and Reel (Alt: SQS180ENW-T1_GE3) RoHS : Not Compliant |
| 3,000 | ||
| 600S180FW250XT | Kyocera AVX Components | MLC 600 - Tape and Reel (Alt: 600S180FW250XT) RoHS : Not Compliant |
| 2,000 | ||
| PTS181230V020 | Eaton Corporation | Resettable Fuse, PPTC, 1812 (4532 Metric), PolyTron PTS1812, 30 VDC, 200 mA, 400 mA, 0.02 s - Tape and Reel (Alt: PTS181230V020) RoHS : Compliant |
| 2,000 | ||
| VGAS181234U770DP | Kyocera AVX Components | - Tape and Reel (Alt: VGAS181234U770DP) RoHS : Compliant |
| 2,000 | ||
| RWR80S1821FRS70 | Vishay Intertechnologies | Through Hole Resistor, 1.82 kohm, RWR Series, 2 W, ? 1%, Axial Leaded, Wirewound, ? 20ppm/?C - Tape and Reel (Alt: RWR80S1821FRS70) RoHS : Not Compliant |
| 1,000 | ||
| MTLW-105-05-G-S-185 | Samtec Inc | - Bulk (Alt: MTLW-105-05-G-S-185) RoHS : Compliant |
| 587 | ||
| ECS-18-13-1X | ECS International Inc | - Bulk (Alt: ECS-18-13-1X) RoHS : Compliant |
| 491 | ||
MCP23S18-E/MJ![]() | Microchip Technology Inc | - Rail/Tube (Alt: MCP23S18-E/MJ) RoHS : Compliant |
| 273 | ||
MCP23S18-E/SO![]() | Microchip Technology Inc | I/O Expander 28-Pin SOIC W - Rail/Tube (Alt: MCP23S18-E/SO) RoHS : Compliant |
| 189 | ||
| ATS-HP-D3L100S18W-112 | Advanced Thermal Solutions Inc | HIGH PERFORMANCE COPPER HEAT PIPE - ROUN - Trays (Alt: ATS-HP-D3L100S18W-112) RoHS : Compliant |
| 100 | ||
| ECS-184-18-4X | ECS International Inc | - Bulk (Alt: ECS-184-18-4X) RoHS : Compliant |
| 100 | ||
| MTLW-103-05-G-S-185 | Samtec Inc | - Bulk (Alt: MTLW-103-05-G-S-185) RoHS : Compliant |
| 29 | ||
| REF60W1ZVS186EMTOBO2 | Infineon Technologies AG | REF60W1ZVS186EMTOBO2 - Boxed Product (Development Kits) (Alt: REF60W1ZVS186EMTOBO2) RoHS : Not Compliant |
| 1 | ||
![]() Newark | DS1804U-010+T&R | Analog Devices Inc | Trimmer Digital Pot, 10K, Single, Usop-8; |Analog Devices, Inc. DS1804U-010+T&R RoHS : Compliant |
| 2,504 | |
| DS1804U-010+T&R | Analog Devices Inc | Trimmer Digital Pot, 10K, Single, Usop-8; |Analog Devices, Inc. DS1804U-010+T&R RoHS : Compliant |
| 2,504 | ||
| DS1812R-5+T&R | Analog Devices Inc | Mpu Supervisor, 5.5V, Sot-23-3; |Analog Devices, Inc. DS1812R-5+T&R RoHS : Compliant |
| 1,058 | ||
| DS1812R-5+T&R | Analog Devices Inc | Mpu Supervisor, 5.5V, Sot-23-3; |Analog Devices, Inc. DS1812R-5+T&R RoHS : Compliant |
| 1,058 | ||
| DS1813R-15+T&R | Analog Devices Inc | Mpu Supervisor, 5.5V, Sot-23-3; |Analog Devices, Inc. DS1813R-15+T&R RoHS : Compliant |
| 507 | ||
| DS1813R-15+T&R | Analog Devices Inc | Mpu Supervisor, 5.5V, Sot-23-3; |Analog Devices, Inc. DS1813R-15+T&R RoHS : Compliant |
| 507 | ||
| DS1803Z-050+ | Analog Devices Inc | Digital Pot, 50K, Dual, Nsoic-16; |Analog Devices, Inc. DS1803Z-050+ RoHS : Compliant |
| 460 | ||
| CS18184 | Hammond Manufacturing | Enclosure Met, Electrical/Ind, Steel; |Hammond CS18184 RoHS : Compliant |
| 329 | ||
| OS-187 | Essentra Components | Insulation Sleeve, Nylon 6/6, Natural; Accessory Type:Insulation Sleeve; For Use With:Essentra Components Straight Type Receptacles; Product Range:Os Series Rohs Compliant: Yes |Essentra Components OS-187 RoHS : Compliant |
| 200 | ||
| DS1855E-050+ | Analog Devices Inc | Digital Pot, 50K, -40 To 85Deg C; |Analog Devices, Inc. DS1855E-050+ RoHS : Compliant |
| 188 | ||
| DS1806E-050+ | Analog Devices Inc | Digital Pot, 50K, Hex, Tssop-20; |Analog Devices, Inc. DS1806E-050+ RoHS : Compliant |
| 145 | ||
| WRPS18UWH | Hammond Manufacturing | Inner Panel, 18U, Steel, Sgnl Wht; |Hammond WRPS18UWH RoHS : Compliant |
| 102 | ||
| AIO-BDPCS-18-22 | Amphenol Industrial Operations | Blanking Plug, Dome, 18Mm, Black, Nyl; Plug Material:Nylon 6 (Polyamide 6); Thread Size:Pg16; External Diameter:18Mm; Product Range:Guardxcel Series |Amphenol Industrial AIO-BDPCS-18-22 RoHS : Not Compliant |
| 50 | ||
| S1811-46R | Harwin | Rfi Shield Clip, 8.8 X 2.48 X 3.37Mm; Accessory Type:Shield Clip; For Use With:Harwin Emi/Rfi Shields; Product Range:- Rohs Compliant: Yes |Harwin S1811-46R RoHS : Compliant |
| 5 | ||
| 160S-18 | Dwyer Instruments Inc | Pitot Tube, S Type, Stainless Steel, 18"; Accessory Type:Pitot Tube; Diameter:0.313"; Body Material:Stainless Steel; For Use With:Flow Measurement In Air Streams; Product Range:160S Series Rohs Compliant: Yes |Dwyer 160S-18 RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | DS1812R-5+T&R | Analog Devices Inc | 5V EconoReset with Active High RoHS : Compliant |
| 30,513 | |
| DS1813R-15+T&R | Analog Devices Inc | 5V EconoReset with Pushbutton RoHS : Compliant |
| 24,128 | ||
| DS1830+ | Analog Devices Inc | Reset Sequence Pushbutton RoHS : Compliant |
| 15,128 | ||
| DS1859B-020+T&R | Analog Devices Inc | Dual, Temperature-Controlled R RoHS : Compliant | 10,000 | |||
| ADES1830CCSZ | Analog Devices Inc | 16 Channel Multicell Battery M RoHS : Compliant |
| 2,889 | ||
| DS1803Z-050+ | Analog Devices Inc | Addressable Dual Digital Poten RoHS : Compliant |
| 2,499 | ||
| DS1804U-050+ | Analog Devices Inc | Nonvolatile Trimmer Potentiome RoHS : Compliant |
| 2,297 | ||
| DS1806E-050+ | Analog Devices Inc | Digital Sextet Potentiometer RoHS : Compliant |
| 2,063 | ||
| DS1856E-020+ | Analog Devices Inc | Dual, Temperature-Controlled R RoHS : Compliant |
| 96 | ||
| DS1855E-050+ | Analog Devices Inc | Dual Nonvolatile Digital Poten RoHS : Compliant |
| 34 | ||
| ADZS-180PWM-SAM | Analog Devices Inc | PWM/Memory 180-Pin Probing Boa |
| 16 | ||
| DS1804U-010+T&R | Analog Devices Inc | Nonvolatile Trimmer Potentiome RoHS : Compliant |
| 0 | ||
| DS1818R-5-U+ | Analog Devices Inc | 3.3V EconoReset with Pushbutto RoHS : Compliant | 0 | |||
| DS1847B-050+T&R | Analog Devices Inc | Dual Temperature-Controlled NV RoHS : Compliant | 0 | |||
| DS1856E-020+T&R | Analog Devices Inc | Dual, Temperature-Controlled R RoHS : Compliant | 0 | |||
![]() RS | QS186LEQ8 (70253) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, LASER CLASS 1, 15M, 10-30VDC, QD, QS18 |
| 71 | |
| QS18EP6DQ8 (71995) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, 800MM, 10-30VDC, PNP, QD, QS18 |
| 27 | ||
| QS18VN6FF100Q8 (71878) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, FIXED FIELD, 100MM, 10-30VDC, NPN, QD, QS18 |
| 13 | ||
| S8VS-18024A (S8VS18024A) | OMRON Industrial Automation | AC-DC POWER SUPPLY, 24V, 7.5A, 85-264V, ENCLOSED, PFC, 180W, S8VS SERIES |
| 8 | ||
| QS18VP6DQ8-86796 | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, 450 MM, 10-30 VDC, PNP, M12 QD, QS18 SERIES |
| 5 | ||
| QS18VP6FPQ8 (66468) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, PLASTIC FIBER OPTIC, 10-30VDC, PNP, QD, QS18 |
| 5 | ||
| S18RW3LP (33448) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, POLARIZED RETRO, 2M, 20-250VAC, SSAC, CABLE, S18 |
| 3 | ||
| CPE14-M1BH-5LS-1/8 (196942) | Festo | SOLENOID VALVE, 5/2-WAY, PNEUMATIC RESET, 24VDC, G 1/8, 800 L/MIN, -0.9-10 BAR |
| 3 | ||
| S18S2P6FF100Q (45156) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, FIXED FIELD, 100MM, 10-30VDC, PNP, QD, S18 |
| 2 | ||
| BAM00T0 (BOS 18,0-HW-3) | Balluff Inc | BOS - PHOTOELECTRIC SENSORS & ACCESSORIES, BOS 18.0-HW-3 |
| 2 | ||
| BOS00K5 (BOS 18KF-PA-1RE-S4-C) | Balluff Inc | SENSOR, PHOTOELECTRIC RETROREFLECTIVE, M18, RED LIGHT, 5M, PNP, LO/DO, M12 |
| 2 | ||
| CMMT-AS-C3-11A-P3-MP-S1 (8143166) | Festo | SERVO DRIVE, CMMT-AS SERIES |
| 2 | ||
| S18-2VPLP-2M | Banner Engineering Corp | PHOTOELECTRIC SENSOR, POLARIZED RETRO, 6M, 10-30VDC, PNP, CABLE, S18-2 |
| 1 | ||
| QS186LE11 (02756) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, LASER CLASS 1, 15M, 10-30VDC, CABLE, VERTICAL, QS18 SERIES |
| 1 | ||
| S18 | Klein Tools Inc | 9/16" HOLLOW SHANK NUT DRIVER; 4" SHANK |
| 0 | ||
![]() STMicroelectronics | LDL1117S18R | STMicroelectronics | 1.2 A High PSRR low dropout linear voltage regulator RoHS : Compliant |
| 14,652 | |
LD1117AS18TR![]() | STMicroelectronics | Low drop fixed and adjustable positive voltage regulators RoHS : Compliant |
| 12,192 | ||
TS1852AIST![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 3,963 | ||
TS1852IDT![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 3,378 | ||
TS1851ILT![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 2,519 | ||
| STRVS185X02B | STMicroelectronics | ST Repetitive Voltage Suppressor RoHS : Compliant |
| 195 | ||
L78S18CV![]() | STMicroelectronics | positive voltage regulator RoHS : Compliant |
| 133 | ||
TS1872AIYDT![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
TS1872IDT![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
TS1854IPT![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
TS1872AIDT![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
TS1871IDT![]() | STMicroelectronics | 1.8V Input/Output Rail-to-Rail Low Power Operational Amplifiers RoHS : Compliant |
| 0 | ||
TS1874AIYPT![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
TS1872IYDT![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
TS1874IPT![]() | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
![]() Microchip Technology Inc | MCP1826S-1802E/AB![]() | Microchip Technology Inc | 1.0A LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 29,190 | |
| MCP1755S-1802E/MC | Microchip Technology Inc | 16v, 300 mA low quiescent current LDO with shutdown, DFN, Projected EOL: 2040-12-26 RoHS : Compliant |
| 17,100 | ||
| MCP1825S-1802E/DBVAO | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2051-01-09 RoHS : Compliant |
| 13,182 | ||
| MCP23S18T-E/SOVAO | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with 12C Interface, SOIC, Projected EOL: 2046-08-02 RoHS : Compliant |
| 7,193 | ||
MCP1825S-1802E/EB![]() | Microchip Technology Inc | 500MA LOW VOLTAGE, LOW IQ LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 4,100 | ||
MCP1826S-1802E/DB![]() | Microchip Technology Inc | 1.0A LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 3,869 | ||
MCP23S18T-E/MJ![]() | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with I2C Interface, QFN, Projected EOL: 2036-10-02 RoHS : Compliant |
| 1,035 | ||
MCP1827S-1802E/AB![]() | Microchip Technology Inc | 1.5A LDO Regulator, TO-220, Projected EOL: 2036-09-06 RoHS : Compliant |
| 1,000 | ||
| AC31S18A | Microchip Technology Inc | AVR Programming Adapter, Projected EOL: RoHS : Compliant |
| 263 | ||
MCP23S18-E/SP![]() | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with 12C Interface, SPDIP, Projected EOL: 2036-09-30 RoHS : Compliant |
| 210 | ||
| MCP23S18T-E/MJVAO | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with I2C Interface, QFN, Projected EOL: 2046-07-06 RoHS : Compliant |
| 148 | ||
MCP23S18-E/SO![]() | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with 12C Interface, SOIC, Projected EOL: 2036-09-30 RoHS : Compliant |
| 80 | ||
MCP1825S-1802E/DB![]() | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 58 | ||
MCP23S18-E/MJ![]() | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with I2C Interface, QFN, Projected EOL: 2036-10-02 RoHS : Compliant |
| 27 | ||
| AT68166H-YS18-E | Microchip Technology Inc | 16Mbit 512Kx32 SRAM MCM,18ns Prot, CQFP, Projected EOL: 2040-12-03 - Contact for Pricing RoHS : Compliant | 3 | |||
![]() Bisco Industries | NAS1829C4E05 | Lyn-Tron Inc | 16,321 | |||
| NAS1829C4G12 | Lyn-Tron Inc | 822 | ||||
| NAS1829-4G32 | RAF Electronic Hardware | 196 | ||||
| NAS1831C3B06 | NAS SPACERS/STANDOFFS/HANDLES | 72 | ||||
| NAS1829C4G12 | RAF Electronic Hardware | 52 | ||||
| NAS1829C6J26 | RAF Electronic Hardware | 51 | ||||
| NAS1801-5-20 | NAS HEX CAP SCREWS | 45 | ||||
| NAS1802-3-14P | B&B Specialties Inc | 9 | ||||
| NAS1802-08-20 | NAS HEX CAP SCREWS | 6 | ||||
| NAS1802-3-96P | NAS HEX CAP SCREWS | 6 | ||||
| NAS1802-3-30 | NAS HEX CAP SCREWS | 4 | ||||
| NAS1829C4E05 | NAS SPACERS/STANDOFFS/HANDLES | 2 | ||||
| NAS1831AC4C16 | RAF Electronic Hardware | 2 | ||||
| NAS1831-4C24 | NAS SPACERS/STANDOFFS/HANDLES | 1 | ||||
| NAS1831C3B06 | RAF Electronic Hardware | 1 | ||||
![]() Rochester Electronics | BGS18MA14E6327XTSA1 | Infineon Technologies AG | RF Switch SP8T 100MHz 3.8GHz 14-QFN T/R RoHS : Compliant |
| 364,313 | |
| EP2S180F1020C5N | Altera Corporation | FPGAs Stratix II 9383040b 1.15V 742 I/O 1020-BGA Tray RoHS : Compliant |
| 1 | ||
CYD02S18V-167BBC![]() | Cypress Semiconductor | Dual-Port SRAM, 128KX18, 4ns PBGA256 RoHS : Not Compliant |
| 45 | ||
CYD09S18V18-200BBXI![]() | Cypress Semiconductor | Dual-Port SRAM, 512KX18, 3.3ns PBGA256 RoHS : Compliant |
| 126 | ||
FAN1117AS18X![]() | Fairchild Semiconductor Corporation | Fixed Positive LDO Regulator, 1.8V, 1.2V Dropout, BIPolar, PDSO4 RoHS : Compliant |
| 320,006 | ||
DS1804-100![]() | Maxim Integrated Products | Pot Digital 1 Element 100 POS 100 kOhm 2.7V ±20% 8-DIP Tube RoHS : Not Compliant |
| 1,446 | ||
| DS1806S-100+ | Maxim Integrated Products | Digital Sextet Potentiometer RoHS : Compliant |
| 1,368 | ||
DS1811R-10-U![]() | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.35V, CMOS, PDSO3 RoHS : Not Compliant |
| 19,425 | ||
DS1813R-15-U+![]() | Maxim Integrated Products | Supervisory Circuit 4.13V SOT-23-3 RoHS : Compliant |
| 2,444 | ||
DS1816R-20-U![]() | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.55V, CMOS, PDSO3 RoHS : Not Compliant |
| 6,576 | ||
DS1831A+![]() | Maxim Integrated Products | Power Supply Management Circuit, Fixed, 4 Channel, PDIP16 RoHS : Compliant |
| 10,875 | ||
DS1844S-010/T&R![]() | Maxim Integrated Products | Pot Digital 4 Element 64 POS 10 kOhm 2.7V ±20% 20-SOIC T/R RoHS : Not Compliant |
| 1,000 | ||
| DS1852B-000/C | Maxim Integrated Products | Telecom Circuit RoHS : Not Compliant |
| 79 | ||
NP80N03MLE-S18-AY![]() | Renesas Electronics Corporation | MOSFET N-Channel 30V 80A (Tc) TO-220-3 Tube RoHS : Compliant |
| 300 | ||
| 54LS183J | Rochester Electronics LLC | 54LS183 - Full Adder, Dual Carry-Save RoHS : Not Compliant |
| 300 | ||
![]() Sager | ATS-18A-02-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM |
| 0 | |
ATS-18A-164-C2-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,T766 |
| 0 | ||
ATS-18A-169-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 |
| 0 | ||
ATS-18A-170-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 |
| 0 | ||
ATS-18A-183-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM |
| 0 | ||
ATS-18A-188-C2-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 |
| 0 | ||
ATS-18A-194-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 |
| 0 | ||
ATS-18B-04-C2-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 |
| 0 | ||
| ATS-18B-09-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 |
| 0 | ||
ATS-18B-10-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 |
| 0 | ||
ATS-18B-100-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM |
| 0 | ||
ATS-18B-124-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM |
| 0 | ||
ATS-18B-201-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 |
| 0 | ||
ATS-18B-23-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM |
| 0 | ||
| ATS-18B-28-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 |
| 0 | ||
![]() Coilcraft Direct | 0805CS-181XGRC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 38,339 | |
| 0402CS-18NX | Coilcraft Inc | RF Inductor, ceramic core, 2% toll, SMT, RoHS, halogen-free RoHS : Compliant |
| 20,697 | ||
| 0603CS-18NXJL | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 5,341 | ||
| 0805LS-182XGEC | Coilcraft Inc | RF inductor, ferrite core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 3,284 | ||
| 0402CS-18NXJRW | Coilcraft Inc | RF Inductor, ceramic core, 5% toll, SMT, RoHS, halogen-free RoHS : Compliant |
| 2,616 | ||
| 1008CS-180XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 2,214 | ||
| 0805LS-182XJLC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS RoHS : Compliant |
| 1,882 | ||
| 1206CS-181XFLC | Coilcraft Inc | RF inductor, ceramic core, 1% tol, SMT, RoHS RoHS : Compliant | 1,600 | |||
| 0603CS-18NXGE | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 1,030 | ||
| 0805LS-182XJLD | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1008HS-181TGRC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, Halogen Free R RoHS : Compliant |
| 0 | ||
| 0603LS-183XJEC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant | 0 | |||
| 0805HS-181TGRC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 0805HS-181TFRC | Coilcraft Inc | RF inductor, ceramic core, 1% tol, SMT, RoHS RoHS : Compliant | 0 | |||
| 0805HS-180TJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | TS1851ILT![]() | STMicroelectronics | TS1851 Series 0.25 V/µs 6 V Rail-to-Rail Low Power Operational Amplifier-SOT23-5 RoHS : Compliant | 3,151 | ||
| VS18VUA1LAMTFTR | ROHM Semiconductor | 瞬态电压抑制器(AEC-Q101标准) RoHS : Compliant |
| 3,000 | ||
TVS1801DRBR![]() | Texas Instruments | RoHS : Compliant | 2,638 | |||
| DS1811R-15+TR | Analog Devices Inc | DS1811R-15 ECONORESET | 2,529 | |||
| DS1816R-10+T&R | Analog Devices Inc | DS1816 Series 2.97 V 250 ms SMT Open Drain Simple Reset/Power On Reset - SOT-23 RoHS : Compliant | 389 | |||
SN65LVDS180PWRQ1![]() | Texas Instruments | IC DRVR/RCR LINE DIFF HS 14TSSOP RoHS : Compliant | 139 | |||
| DS1804Z-010+ | Analog Devices Inc | RoHS : Compliant | 100 | |||
| VS18VUA1VWMTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| VS18VUA1VWMTFTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| VS18VUA1LBTBR1 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| ICS1892Y | Renesas Electronics Corporation | 91 | ||||
| DS1818R-5+T&R | Analog Devices Inc | DS1818 Series 3.15 V 250 ms SMT Open Drain Simple Reset/Power On Reset - SOT-23 RoHS : Compliant | 86 | |||
| DS1804Z-010+T&R | Analog Devices Inc | DS1804 Series 100 Step 10kOhm Non-Volatile Trimmer Potentiometer - SOIC-8 RoHS : Compliant | 45 | |||
SN65ALS180DR![]() | Texas Instruments | IC DIFF DRVR/RCVR PAIR 14-SOIC RoHS : Compliant | 11 | |||
| DS18B20U+ | Analog Devices Inc | DS18B20 Series 5.5V Surface Mount 1-Wire Digital Thermometer - uMAX-8 RoHS : Compliant | 10 | |||
![]() ComSIT USA | DS1818R20TR | Analog Devices Inc | AVAILABLE EU | 1,944 | ||
![]() ComSIT USA | ZMY100GS18 | Vishay Intertechnologies | ZENER DIODE Zener Diode, 100V V(Z), 6%, 1W, Silicon, Unidirectional RoHS : Compliant | 50,000 | ||
| TZMC51GS18 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 51V V(Z), 5%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Compliant | 50,000 | |||
| ZMY6V2GS18 | Vishay Intertechnologies | ZENER DIODE Zener Diode, 6.2V V(Z), 6.45%, 1W, Silicon, Unidirectional, DO-213AB RoHS : Compliant | 30,000 | |||
| TZMC7V5GS18 | Vishay Intertechnologies | Zener Diode, 7.5V V(Z), 6.7%, 0.5W RoHS : Not Compliant | 28,155 | |||
| ZMY68GS18 | Vishay Intertechnologies | ZENER DIODE Zener Diode, 68V V(Z), 5.88%, 1W, Silicon, Unidirectional, DO-213AB RoHS : Compliant | 10,000 | |||
| BZD27C33PGS18 | Vishay Intertechnologies | ZENER DIODE WITH SURGE CURRENT SPECIFICATION Zener Diode, 33V V(Z), 6.06%, 0.8W, Silicon, Unidirectional, DO-219AB RoHS : Compliant | 10,000 | |||
| BZX84C33VGS18 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 33V V(Z), 5%, 0.3W, Silicon, Unidirectional RoHS : Compliant | 9,910 | |||
| MMSZ4691VGS18 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 6.2V V(Z), 5%, 0.5W, Silicon, Unidirectional RoHS : Compliant | 6,995 | |||
TS1872AIYDT![]() | STMicroelectronics | 1.8V INPUT/OUTPUT RAIL-TO-RAIL LOW POWER OPERATIONAL AMPLIFIER Operational Amplifier, 2 Func, 1500uV Offset-Max, BICMOS, PDSO8 RoHS : Compliant | 5,000 | |||
| CS18LV02563AC70 | Chiplus Semiconductor Corp | 32K WORD BY 8 BIT HIGH SPEED SUPER LOW POWER SRAM Standard SRAM, 32KX8, 70ns, CMOS, PDSO28 RoHS : Not Compliant | 4,000 | |||
| MKS185460404PCV0B147S38 | Stocko Contact GmbH & Co Kg | Conn Shrouded Header HDR 4 POS 2.5mm Solder ST Thru-Hole RoHS : Compliant | 3,000 | |||
| TEKS5423X01GS18 | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 3,000 | |||
| DS1816R10TR | Dallas Semiconductor | 3.3V ECONORESET WITH OPEN DRAIN OUTPUT Power Supply Support Circuit, Fixed, 1 Channel, PDSO3 RoHS : Not Compliant | 2,200 | |||
L78S18CV![]() | STMicroelectronics | Regulator, 1 Output, BIPolar RoHS : Not Compliant | 1,400 | |||
| ICS1890Y | ics | 10BASE-T/100BASE-TX INTEGRATED PHYCEIVER LAN Controller, 1 Channel(s), 12.5MBps, CMOS, PQFP64 RoHS : Not Compliant | 256 | |||
![]() Interstate Connecting Components | BACC45FS18-11P7H | Cinch Connectivity Solutions | BACC PLUG 10#16 1#2 PIN | 0 | ||
| TS18115C0000G | Amphenol Anytek | TS -3.5 -18P GREEN - BM CL | 0 | |||
| CIR02RFS-18-20S-F80-VO | ITT Interconnect Solutions | 5015 BAY PNL MT RECP 5#16 SKT CRIMP LC RoHS : Compliant |
| 0 | ||
| CIR02RFS1819SF80T12 | ITT Interconnect Solutions | CIR02RFS-18-19S-F80-T12 | 0 | |||
| 202K142-25/225-CS-1858 | TE Connectivity | 202K142-25/225-CS-1858-0 |
| 0 | ||
| 280-018P2H26MEGS-186 | Glenair Inc | 0 | ||||
| 388HS181XNF17-05 | Glenair Inc | D10 - CONNECTOR, ACCESS | 0 | |||
| FRITS4108GS18-3SB0F7 | Glenair Inc | RoHS : Compliant | 0 | |||
| G87MPS182202CHR | Amphenol Commercial | MINI POWER SUPER 4.2MM | 0 | |||
| FRCIR02RFS1812PF80T12 | ITT Interconnect Solutions | FRCIR02RFS-18-12P-F80-T12 | 0 | |||
| FRITS4100RS18-19PB0F6 | Glenair Inc | RoHS : Compliant | 0 | |||
| DD78M3S0T6S-1827.0 | Amphenol Positronic | DD SERIES, D-SUB 78 POS, PIN (MALE) | 0 | |||
| BACC45FS18-8P9H | Cinch Connectivity Solutions | BACC PLUG 8#12 PIN | 0 | |||
| 222K174-25-CS-1858-0 | TE Connectivity | 222K174-25-CS-1858-0 RoHS : Compliant | 0 | |||
| A85049109S18TX066D | Amphenol PCD | M85049109S18TX06-6D | 0 | |||
![]() NexGen Digital | RMC16S-181JTH50K | Kamaya Inc | 18,000 | |||
| RMC1/16S-181JTH99 | Kamaya Inc | 6,634 | ||||
| LQG15HS18NJ02D | Murata Manufacturing Co Ltd | RoHS : Compliant | 5,167 | |||
| 1008CS-180KXBC | Coilcraft Inc | 1,991 | ||||
| 0805CS180XJBC | Coilcraft Inc | 933 | ||||
| 1008HS-181TJBC | Coilcraft Inc | RoHS : Not Compliant | 875 | |||
| ECS-184-S-20A-TR | ECS International Inc | RoHS : Compliant | 524 | |||
| 1812LS-183XJBC | Coilcraft Inc | RoHS : Not Compliant | 500 | |||
| DS1818R-5+ | Maxim Integrated Products | 143 | ||||
| ATC600S180GT250 | American Technical Ceramics Corp | 82 | ||||
| 0603LS-181XJLC | Coilcraft Inc | RoHS : Compliant | 60 | |||
| LP3873ES-1.8/NOPB | National Semiconductor Corporation | RoHS : Compliant | 49 | |||
| NAS186DD3C6.B | 40 | |||||
DS1818R-5-U+![]() | Maxim Integrated Products | RoHS : Compliant | 13 | |||
| DS18S20Z | Dallas Semiconductor | RoHS : Not Compliant | 8 | |||
![]() PEI Genesis | O2B2S 1/8 BLACK | SUMITOMO ELECTRIC Interconnect Products |
| 30,000 | ||
| BACC45FS18-11P7H | Cinch Connectivity Solutions |
| 0 | |||
| 06F2015S1813CN3 | SOURIAU-SUNBANK |
| 0 | |||
| 03F3009S1808N4-114 | SOURIAU-SUNBANK |
| 0 | |||
| 03X2016S1811CN5 | SOURIAU-SUNBANK |
| 0 | |||
| BACC45FS18-31P7 | Cinch Connectivity Solutions |
| 0 | |||
| BACC45FS18-8P9H | Cinch Connectivity Solutions |
| 0 | |||
| S1802-10-1.5-12 | SOURIAU-SUNBANK |
| 0 | |||
| S1841-64-30S | SOURIAU-SUNBANK |
| 0 | |||
| S1844-09R12D | SOURIAU-SUNBANK |
| 0 | |||
| S1852-72-12 | SOURIAU-SUNBANK |
| 0 | |||
| S1888-08-12 | SOURIAU-SUNBANK |
| 0 | |||
| S3566S18E1.0 | SOURIAU-SUNBANK |
| 0 | |||
| S4603FS1807L34-6 | SOURIAU-SUNBANK |
| 0 | |||
| 85333RS1808S6 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | AHDMBS-18-059 | Amphenol Sine Systems | Backshell with camble clamp Size 18 |
| 594 | |
| CS18184 | Hammond Manufacturing | SCREW COVER NO KO'S 18X18X4 |
| 148 | ||
| MS3450LS18-10SZ | Conesys | WALL MT. REC. |
| 147 | ||
| MS3456LS18-10S | Conesys | Straight Plug |
| 147 | ||
| TW-17-09-L-S-180-135 | Samtec Inc | Cable Assembly, Wire-to-Board, Through-H RoHS : Compliant |
| 89 | ||
| 382A012-25-CS-1821-0 | TE Connectivity | Connectors |
| 66 | ||
| WRPS18UWH | Hammond Manufacturing | 18U STEEL INNER PANEL RoHS : Compliant |
| 65 | ||
| MS3456KS18-11PY | Conesys | Straight Plug |
| 54 | ||
| 222K174-25-CS-1858-0 | TE Connectivity | Connectors RoHS : Compliant |
| 46 | ||
| 202K132-25/225-CS-1858-0 | TE Connectivity | Connectors RoHS : Compliant |
| 44 | ||
| MS3456KS18-9PZ | Conesys | Straight Plug |
| 28 | ||
| 85333RS1831SNL | SOURIAU-SUNBANK | 853 31C 31#20 SKT PLUG |
| 13 | ||
| MS3452LS18-1SZ | Amphenol Corporation | CONNECTOR |
| 12 | ||
| MS3454LS18-4SW | Conesys | Jam Nut Receptacle |
| 4 | ||
| MS3459KS18-4PZ | Conesys | Self Locking Plug |
| 4 | ||
![]() PUI | CBW57-HS-18A | 122 | ||||
| 0103-1P07S18TSAA01 | 5 | |||||
![]() Rutronik | BAS85-GS18 | Vishay Intertechnologies | SCHOTTKY-DIODE 30V 0,2A GLASS RoHS : Compliant |
| 170,000 | |
| S07J-GS18 | Vishay Intertechnologies | SI-DIODE 0,7A 600V SMF DO219AB RoHS : Compliant |
| 150,000 | ||
| LS101C-GS18 | Vishay Intertechnologies | SCHOTTKY-DIODE 40V 0,01A QuadroMELF RoHS : Compliant |
| 90,000 | ||
| TZMC10-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 10V 5% MINIMELF RoHS : Compliant |
| 70,000 | ||
LQG15HS18NH02D![]() | Murata Manufacturing Co Ltd | LQG15HS 0,018uH 400mA 3% MLT RoHS : Compliant |
| 60,000 | ||
| TZMC5V1-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 5,1V 5% MINIMELF RoHS : Compliant |
| 50,000 | ||
| TZMC3V9-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 3,9V 5% MINIMELF RoHS : Compliant |
| 30,000 | ||
| TZMC75-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 75V 5% MINIMELF RoHS : Compliant |
| 20,000 | ||
| ZMY12-GS18 | Vishay Intertechnologies | Z-DIODE 1,0W 12V 5% MELF RoHS : Compliant |
| 10,000 | ||
| LS101A-GS18 | Vishay Intertechnologies | SCHOTTKY-DIODE 60V 0,03A QuadroMELF RoHS : Compliant |
| 10,000 | ||
| BZT55B13-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 13V 2% QUADROMELF RoHS : Compliant |
| 10,000 | ||
| ZM4742A-GS18 | Vishay Intertechnologies | Z-DIODE 1,0W 12V 5% MELF RoHS : Compliant |
| 10,000 | ||
| BCAP0360P270S18 | Maxwell Technologies | BCAP 360F 2,7V -0+20% 36x64 RoHS : Compliant |
| 7,370 | ||
| ZMY18-GS18 | Vishay Intertechnologies | Z-DIODE 1,0W 18V 5% MELF RoHS : Compliant |
| 5,000 | ||
| PTS181216V050 | Eaton Electronics | 0.5A resettable PTC 16V 1812 RoHS : Compliant |
| 2,000 | ||
![]() Chip 1 Exchange | GDZ11B-V-GS18 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 10,000 | ||
| MF60SS-180F-A5 | ASJ Holdings Limited | INSTOCK | 10,000 | |||
| BAS21-V-GS18 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 9,684 | |||
| ZMY12-GS18 | INSTOCK | 5,000 | ||||
| PS186HDMQFN56GTR2-A1 | PARAT | INSTOCK | 3,100 | |||
| DS1815R-10 | INSTOCK | 2,929 | ||||
| DS1811R-10+T&R | INSTOCK | 2,529 | ||||
| 1008LS-182XKBC | INSTOCK | 1,275 | ||||
| ICS1890Y | INSTOCK | 575 | ||||
DS1811R-10+T&R![]() | Maxim Integrated Products | INSTOCK RoHS : Compliant | 500 | |||
| SN74AS1805N | INSTOCK | 172 | ||||
L78S18CV![]() | STMicroelectronics | INSTOCK RoHS : Compliant | 47 | |||
| DS1802 | INSTOCK | 37 | ||||
ICS1892Y![]() | Integrated Device Technology Inc | INSTOCK RoHS : Not Compliant | 10 | |||
| ICS1892Y | ICS | INSTOCK | 2 | |||
![]() Avnet Abacus | LQG15HS18NJ02D | Murata Manufacturing Co Ltd | Multilayer Inductor 18 nH 036 ohm 22 GHz 300 mA 0402 1005 Metric LQG15HS02 Series (Alt: LQG15HS18NJ02D) RoHS : Compliant | 40,000 | ||
| MMZ1005S182ET000 | TDK Corporation | Ferrite Bead 0402 1005 Metric 18 kohm 200 mA MMZE Series 15 ohm 25 (Alt: MMZ1005S182ET000) RoHS : Compliant | 40,000 | |||
| MMZ1005S182ETD25 | TDK Corporation | MMZ1005S182ETD25 (Alt: MMZ1005S182ETD25) RoHS : Compliant | 10,000 | |||
| PTS181230V020 | Eaton Corporation | Resettable Fuse PPTC 1812 4532 Metric PolyTron PTS1812 30 VDC 200 mA 400 mA 002 s - Tape and Reel (Alt: PTS181230V020) RoHS : Compliant | 8,000 | |||
| PTS181216V110 | Eaton Corporation | Resettable Fuse PPTC 1812 4532 Metric PolyTron PTS1812 16 VDC 11 A 22 A 05 s - Tape and Reel (Alt: PTS181216V110) RoHS : Compliant | 2,000 | |||
| ATBS-PS-1805 | Amphenol Corporation | Backshell for T1618PSX and AT1615PSX Series 1518 Position HeavyDuty Connectors 18 Shell Size ST Thermoplastic (Alt: ATBS-PS-1805) RoHS : Compliant | 1,050 | |||
ECM140US18![]() | XP Power | POWER SUPPLY 140WATT OPEN FRAME (Alt: ECM140US18) RoHS : Compliant | 10 | |||
| ATS180A-E | CTS Corporation | (Alt: ATS180A-E) RoHS : Compliant | 0 | |||
| CAS18C101KAGGC | KEMET Corporation | Ceramic Suppression Capacitor 100 pF 10 X2 250 VAC 1812 4532 Metric Surface Mount 35 mm (Alt: CAS18C101KAGGC) RoHS : Compliant | 0 | |||
| CAS18C150MAGGC | KEMET Corporation | Ceramic Suppression Capacitor 15 pF 20 X2 250 VAC 1812 4532 Metric Surface Mount 35 mm (Alt: CAS18C150MAGGC) RoHS : Compliant | 0 | |||
| CAS18C220KAGGC | KEMET Corporation | Ceramic Suppression Capacitor 22 pF 10 X2 250 VAC 1812 4532 Metric Surface Mount 35 mm (Alt: CAS18C220KAGGC) RoHS : Compliant | 0 | |||
| CAS18C271KARFC | KEMET Corporation | Ceramic Suppression Capacitor 270 pF 10 X1 Y2 250 VAC 250 VAC 1812 4532 Metric (Alt: CAS18C271KARFC) RoHS : Compliant | 0 | |||
| CAS18C471GAGGC | KEMET Corporation | Ceramic Suppression Capacitor 470 pF 2 X2 250 VAC 1812 4532 Metric Surface Mount 35 mm (Alt: CAS18C471GAGGC) RoHS : Compliant | 0 | |||
| CAS18C821JAGGC | KEMET Corporation | Ceramic Suppression Capacitor 820 pF 5 X2 250 VAC 1812 4532 Metric Surface Mount 35 mm (Alt: CAS18C821JAGGC) RoHS : Compliant | 0 | |||
| TRS1-80MSR01EV | KEMET Corporation | (Alt: TRS1-80MSR01EV) RoHS : Compliant | 0 | |||
![]() Avnet Asia | EYGS182307 | Panasonic Electronic Components | (Alt: EYGS182307) RoHS : Compliant | 50 | ||
| TZMC43-GS18 | Vishay Intertechnologies | (Alt: TZMC43-GS18) RoHS : Compliant | 0 | |||
| PTS181233V075 | Eaton Corporation | Resettable Fuse, PPTC, 1812 (4532 Metric), PolyTron PTS1812, 33 VDC, 750 mA, 1.5 A, 0.2 s (Alt: PTS181233V075) RoHS : Compliant | 0 | |||
PTVS18VZ1USKYL![]() | Nexperia | (Alt: PTVS18VZ1USKYL) RoHS : Compliant | 0 | |||
| CCS-180719-01-MP | Samtec Inc | SATCCS-180719-01-MP CUSTOM HDR COMPONENT (Alt: CCS-180719-01-MP) RoHS : Compliant | 0 | |||
| BE70C-S-18SP-2-02-0305 | Samtec Inc | SATBE70C-S-18SP-2-02-0305 70 GHZ, BULLS (Alt: BE70C-S-18SP-2-02-0305) RoHS : Compliant | 0 | |||
| EYG-S182307 | Panasonic Electronic Components | (Alt: EYG-S182307) RoHS : Compliant | 0 | |||
| ABLS-18.432MHZ-B2-T | Abracon Corporation | Crystal, Standard, 18.432 MHz, SMD, 11.5mm x 4.7mm x 4.2mm, 50 ppm, 18 pF, 20 ppm, ABLS (Alt: ABLS-18.432MHZ-B2-T) RoHS : Compliant | 0 | |||
| PTS181260V014 | Eaton Corporation | Resettable Fuse, PPTC, 1812 (4532 Metric), PolyTron PTS1812, 60 VDC, 140 mA, 340 mA, 0.2 s (Alt: PTS181260V014) RoHS : Compliant | 0 | |||
| TZMB20-GS18 | Vishay Intertechnologies | (Alt: TZMB20-GS18) RoHS : Compliant | 0 | |||
| PTS181212V150 | Eaton Corporation | (Alt: PTS181212V150) RoHS : Compliant | 0 | |||
| LL46-GS18 | Vishay Intertechnologies | SCHOTTKY DIODE SOD80 MINIMELF (Alt: LL46-GS18) RoHS : Compliant | 0 | |||
| TZM5232B-GS18 | Vishay Intertechnologies | (Alt: TZM5232B-GS18) RoHS : Compliant | 0 | |||
| TZMC2V7-GS18 | Vishay Intertechnologies | ZENER DIODE SOD80 MINIMELF (Alt: TZMC2V7-GS18) RoHS : Compliant |
| 0 | ||
| PTS181216V110 | Eaton Corporation | Resettable Fuse, PPTC, 1812 (4532 Metric), PolyTron PTS1812, 16 VDC, 1.1 A, 2.2 A, 0.5 s (Alt: PTS181216V110) RoHS : Compliant | 0 | |||
![]() Avnet Silica | PTVS18VP1UP,115![]() | Nexperia | TVS Diode PTVS Unidirectional 18 V 292 V SOD128 2 Pins (Alt: PTVS18VP1UP,115) RoHS : Compliant | 141,000 | ||
LD1117S18CTR![]() | STMicroelectronics | LDO Regulator Pos 18V 13A 4Pin3Tab SOT223 TR (Alt: LD1117S18CTR) RoHS : Compliant | 117,500 | |||
TS1871AIYLT![]() | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871AIYLT) RoHS : Compliant | 111,000 | |||
TS1874IPT![]() | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin TSSOP TR (Alt: TS1874IPT) RoHS : Compliant | 42,500 | |||
LD1117S18TR![]() | STMicroelectronics | Fixed LDO Voltage Regulator 15V in 11V Dropout 18V950mA out SOT2233 (Alt: LD1117S18TR) RoHS : Compliant | 42,500 | |||
LD1117AS18TR![]() | STMicroelectronics | LDO Regulator Pos 18V 1A 4Pin3Tab SOT223 TR (Alt: LD1117AS18TR) RoHS : Compliant | 30,000 | |||
| LDL1117S18R | STMicroelectronics | Fixed LDO Voltage Regulator 26 V to 18 V input 40 mV Dropout 18 V 12 A out SOT2234 (Alt: LDL1117S18R) RoHS : Compliant | 12,500 | |||
TS1874AIYPT![]() | STMicroelectronics | Operational Amplifier RRIO 4 Channels 18 MHz 06 Vs 18V to 6V TSSOP 14 Pins (Alt: TS1874AIYPT) RoHS : Compliant | 12,500 | |||
TS1871AILT![]() | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871AILT) RoHS : Compliant | 9,000 | |||
TS1872IDT![]() | STMicroelectronics | OP Amp Dual GP RR IO 6V 8Pin SO N TR (Alt: TS1872IDT) RoHS : Compliant | 7,500 | |||
TS1871ILT![]() | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871ILT) RoHS : Compliant | 6,000 | |||
TS1874IYPT![]() | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin TSSOP TR (Alt: TS1874IYPT) RoHS : Compliant | 2,500 | |||
TS1874AIYDT![]() | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin SOIC TR (Alt: TS1874AIYDT) RoHS : Compliant | 2,500 | |||
MCP23S18-E/MJ![]() | Microchip Technology Inc | IO Expander 16 bit I2C Serial SPI 18 V 55 V QFN 24 Pins (Alt: MCP23S18-E/MJ) RoHS : Compliant | 91 | |||
| 71V25761S183PFGI | Renesas Electronics Corporation | (Alt: 71V25761S183PFGI) RoHS : Compliant | 72 | |||
![]() Braemac Americas-Symmetry | AMMLPDBLJS-18.4320T | Abracon Corporation |
| 0 | ||
| AMMLPEBLCS-18.4320T | Abracon Corporation |
| 0 | |||
| CFM500S180 | Cincon Electronics Corporation | AC-DC AC-DC MODULES RoHS : Compliant |
| 0 | ||
| EC7B-24S18NS | Cincon Electronics Corporation | Isolated DC-DC Converter RoHS : Compliant |
| 0 | ||
| AMMLPAAVCS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPDAXRS-18.4320T | Abracon Corporation |
| 0 | |||
AMPLA1004S-180MT![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| GPS-18774 | SparkFun Electronics | SparkFun GNSS Timing Breakout - ZED-F9T (Qwiic) |
| 0 | ||
| AMMLPDAVJS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPEAVCS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPFLAXJS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPVALJS-18.4320T | Abracon Corporation |
| 0 | |||
| ABLS-18.432MHZ-K4T | Abracon Corporation | CRYSTAL 18.4320MHZ 18PF SMD |
| 0 | ||
ASPI-4030S-180M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| CFM600S180-PC | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | ||
![]() Component Electronics, Inc | 1008LS-182XKBC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,400 | |
| GPEG10DS-TIS185 | Crane Connectors | IN STOCK SHIP TODAY |
| 600 | ||
| EGS-1-80-22.6R-1% | Vishay Dale | IN STOCK SHIP TODAY |
| 247 | ||
| 970-EN0-DS/18 | WECO Electrical Connectors | IN STOCK SHIP TODAY | 200 | |||
| ECS-184-18-4 | ECS International Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 100 | ||
| N82S185F | Signetics | IN STOCK SHIP TODAY RoHS : Not Compliant | 53 | |||
| HC-49/U-S18432000ABJB | Citizen Finedevice Co Ltd | IN STOCK SHIP TODAY |
| 46 | ||
| MKDS1/8-3.81 | Phoenix Contact | IN STOCK SHIP TODAY |
| 26 | ||
| NTE74S188 | NTE Electronics Inc | IN STOCK SHIP TODAY |
| 14 | ||
| DS1804Z-010 | Dallas Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 10 | ||
| MS18235-3YT | Dialight | IN STOCK SHIP TODAY |
| 8 | ||
| DS1832/T&R | Dallas Semiconductor | IN STOCK SHIP TODAY |
| 7 | ||
TS1872IDT![]() | STMicroelectronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 3 | ||
| MP2-S180-51P1-TR30 | 3M | IN STOCK SHIP TODAY | 3 | |||
| GT32S-18A | Carlo Gavazzi Holding AG | IN STOCK SHIP TODAY |
| 2 | ||
![]() DB Roberts | NAS1801-04-6 | Military Specifications |
| 382 | ||
| NAS1801-3-10 | Military Specifications |
| 272 | |||
| SQLEDS1-8-26 | Essentra Components | Led SpacerT-1Black1/2 inSpc Led Spacer T-1 Black | 0 | |||
| NAS1829C4E05 | RAF Electronic Hardware | STEEL 303 STANDOFFS | 0 | |||
| NAS1831C3B06 | RAF Electronic Hardware | 0 | ||||
| OS-187 | Essentra Components | SLEEVE INSULATOR,NAT,.187 IN S | 0 | |||
| FLCBS-18-01 | Essentra Components | CB SptFlexibleNatural1-1/8 in Spc CB Spt Flexible Natural | 0 | |||
| RS-1811-0437 | Heyco | RS 0187 OD X115 ID X437 LG NAT | 0 | |||
| D4-A35T18DSS18PSNA | Southco | D4-A35T18DSS18PSNA | 0 | |||
| D4-A5T26DSS18PSNA | Southco | D4-A5T26DSS18PSNA | 0 | |||
| D4AW35T30DSS18PSNA | Southco | D4AW35T30DSS18PSNA | 0 | |||
| D4-AW5T14DSS18PSNA | Southco | D4-AW5T14DSS18PSNA | 0 | |||
| CHC-S18DN | Sugatsune Kogyo Co Ltd | 0 | ||||
| RS-1809-0437 | Heyco | RS 0187 OD X091 ID X437 LG NAT | 0 | |||
| RS-1811-0687 | Heyco | RS 0187 OD X115 ID X687 LG NAT | 0 | |||
![]() EBV Elektronik | S07J-GS18 | Vishay Intertechnologies | (Alt: S07J-GS18) RoHS : Compliant | 3,320,000 | ||
| TLZ5V6A-GS18 | Vishay Intertechnologies | (Alt: TLZ5V6A-GS18) RoHS : Compliant | 290,000 | |||
| TZMC5V6-GS18 | Vishay Intertechnologies | (Alt: TZMC5V6-GS18) RoHS : Compliant | 150,000 | |||
| ZMY6V8-GS18 | Vishay Intertechnologies | (Alt: ZMY6V8-GS18) RoHS : Compliant | 140,000 | |||
| TZMC5V1-GS18 | Vishay Intertechnologies | (Alt: TZMC5V1-GS18) RoHS : Compliant | 80,000 | |||
| ZMY12-GS18 | Vishay Intertechnologies | (Alt: ZMY12-GS18) RoHS : Compliant | 60,000 | |||
| TZMC4V3-GS18 | Vishay Intertechnologies | (Alt: TZMC4V3-GS18) RoHS : Compliant | 50,000 | |||
| VLMV3100-GS18 | Vishay Intertechnologies | SMDLED RED GREEN PLCC3e3 (Alt: VLMV3100-GS18) RoHS : Compliant | 48,000 | |||
| TZMB13-GS18 | Vishay Intertechnologies | (Alt: TZMB13-GS18) RoHS : Compliant | 30,000 | |||
| BZT55B6V2-GS18 | Vishay Intertechnologies | ZENER DIODE SOD80 QUADROMELF (Alt: BZT55B6V2-GS18) RoHS : Compliant | 20,000 | |||
| ZMY47-GS18 | Vishay Intertechnologies | (Alt: ZMY47-GS18) RoHS : Compliant | 15,000 | |||
| TZMC3V9-GS18 | Vishay Intertechnologies | (Alt: TZMC3V9-GS18) RoHS : Compliant | 10,000 | |||
| ZMY33-GS18 | Vishay Intertechnologies | (Alt: ZMY33-GS18) RoHS : Compliant | 5,000 | |||
| 1SS184(TE85L,F) | Toshiba America Electronic Components | Diode Switching 85V 03A 3Pin SMini TR (Alt: 1SS184(TE85L,F)) RoHS : Compliant | 3,000 | |||
MCP23S18-E/SO![]() | Microchip Technology Inc | IO Expander 28Pin SOIC W (Alt: MCP23S18-E/SO) RoHS : Compliant | 54 | |||
![]() Flip Electronics | NCP160BFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 160,000 | |
| Z8S18020VSG1960 | Littelfuse Inc | Stock, Ship Today | 25,586 | |||
| NCP161BFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,885 | ||
| Z8S18020VEG00TR | Littelfuse Inc | Stock, Ship Today | 4,550 | |||
| NCV59151DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,976 | ||
NCP5663DS18R4G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,400 | ||
| Z8S18010VEG | Littelfuse Inc | Stock, Ship Today | 2,375 | |||
| Z8S18010VSG | Littelfuse Inc | Stock, Ship Today | 1,675 | |||
| NCP59151DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 800 | ||
| Z8S18020FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 725 | |||
| NCP59301DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 700 | ||
| Z8S18010FEG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 305 | |||
| EP2S180F1020C3 | Altera Corporation | Stock RoHS : Not Compliant | 10 | |||
| ICS80HCPS1848CHMI | Integrated Device Technology Inc | Stock | 4 | |||
| IDT80HCPS1848CHMI | Integrated Device Technology Inc | Stock | 4 | |||
![]() Master Electronics | TS18-5-17-SL-160-SMT-TR![]() | Same Sky | 5.2 x 5.2 mm 1.7 mm Actuator Height Off PCB 160 gf Silver Surface Mount TR SPST Tactile Switch RoHS : Compliant |
| 8,000 | |
| CCS-18S180-T | Teledyne Coax Switches | RF Switch Commercial DC-12GHz SMA Failsafe SP8T TTL RoHS : Compliant |
| 2 | ||
| CS-18S23C-T | Teledyne Coax Switches | RF Switch Commerical DC-12GHz SMA Failsafe SP3T Indicator TTL RoHS : Compliant |
| 1 | ||
| IDSS-18-S-18.00 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| T2SDT-05-24-S-18.00-T-NDS | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TCMD-06-S-18.00-01-RW | Samtec Inc | Ribbon Cable IDC Plug to Free End 12 Ways 18 457.2 mm 2 mm Tiger Eye TCMD RoHS : Compliant |
| 0 | ||
| TCMD-07-S-18.01-01 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TCMD-22-S-18.00-01 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TCSD-02-S-18.00-01 | Samtec Inc | Ribbon Cables / IDC Cables IDC Socket Cable Assemblies 2.00mm Pitch RoHS : Compliant |
| 0 | ||
| TCSD-10-S-18.88-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TCSD-15-S-18.00-01 | Samtec Inc | IDC SOCKET CABLE ASSEMBLI RoHS : Compliant |
| 0 | ||
| TCSD-16-S-18.00-01-N-RW-SR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TCSD-16-S-18.00-01-N-SR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 0D.S18.3227.0 | Wieland Electric GmbH | Jumper Bar Ivb Wtn 16-2 S Modular Spacing 12 Mm Insulated Yes Number Of Poles 2 Color Grey Mounting Method Pluggable Inflammability Class Of Insulation Material Acc. With Ul94 V0 RoHS : Compliant |
| 0 | ||
| CIR02RFS-18-19S-F80-T12 | ITT Interconnect Solutions | Circular Connector - Receptacle - Female Sockets - 10 Position - Shell Size-Insert 18-19 - Bayonet Lock - Crimp Contacts - Panel (Flange) Mount. RoHS : Not Compliant |
| 0 | ||
![]() Neutron USA | SLE18S1803B01 | Advanced Energy Industries Inc | Wall Mount AC Adapters 18W 18Vout 2.3mm Contacts Required |
| 50 | |
| CMS-1849-24SP | CUI Inc | Speakers & Transducers 18 mm, 4.9 mm deep, PU+PEI, Nd-Fe-B, 2 W, 4 ohm, 530 Hz, solder pads |
| 50 | ||
| QS18UPA | Banner Engineering Corp | Ultrasonic Proximity Sensor,18 mm,Rectangular,Diffuse,0.5m,PNP-NO/NC,Cable 4Wire |
| 32 | ||
| QS18VP6FF50Q8 | Banner Engineering Corp | QS18 WORLD-BEAM Fixed-Field Range 50 m 71755, QS18 Series |
| 28 | ||
| S18DLBXXPQ | Banner Engineering Corp | LED Panel Mount Indicators S18 Daylight Visible EZ-LIGHT - 18 mm - IP67; Single Color: Blue; 10-30 V dc PNP Input; 4-pin M12 QD |
| 23 | ||
| S18DLGXXP | Banner Engineering Corp | Indicator, M18 Barrel Mt, Green, 18 mm, 10-30Vdc PNP Input, 2m cable 4wire, 25797 |
| 14 | ||
| QS18VP6DQ8-86796 | Banner Engineering Corp | PE Sensor, Diffuse, R: 450 mm, 10-30 Vdc, L/D PNP, QDM12, 86796 |
| 5 | ||
| QS18VP6FF100Q8-74211 | Banner Engineering Corp | Photoelectric Sensor, Fixed Field, 100mm, 10-30VDC, PNP, QDM12, 74211 |
| 4 | ||
| S18-2VPLP-2M | Banner Engineering Corp | Photoelectric Sensors S18-2 Series: Polarized Retroreflective; Range: 6 m; Input: 10-30 V dc; Outputs: complementary PNP; 2 m 4-conductor PVC Cable |
| 1 | ||
| SLE18S1803B01 | SL Power Electronics | Wall Mount AC Adapters 18W 18Vout 2.3mm Contacts Required |
| 0 | ||
| NI8-S18-AP7X-0.2-RS4T/S100 | TURCK Inc | ProXimity Sensor;8mm Sensing Distance;18mm Barrel;NO;PNP;Non-Flush |
| 0 | ||
| QS18VP6LP, 61630 | Banner Engineering Corp | Banner Engineering QS18VP6LP Photoelectric Sensor, Polarized Retro, 3.5m, 10-30VDC, PNP, Cable, QS18 |
| 0 | ||
| S18DLGRXNT | Banner Engineering Corp | LED Panel Mount Indicators S18 DAYLIGHT VISIBLE EZ Light - 18 mm - IP67; Two Color: Green Red; 10-30 V dc NPN Input; 4-screw Terminal Wiring |
| 0 | ||
| S18LBXXPQ | Banner Engineering Corp | Barrel Mt Indicator, M18, Ez-Light, 18 mm, Single Color Blue, 10-30Vdc, PNP Input, QDM12, 20934 |
| 0 | ||
| S18UIA | Banner Engineering Corp | Ultrasonic Proximity Sensor; TOF, M18 Barrel, R: 0.3m; Analog; 2m Cable 5-Wire, 02702 |
| 0 | ||
![]() Pasternack Enterprises US | PE3W02559/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Right Angle Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly SMA male to SMA male right angle cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male right angle cable 18 inch length using PE-SR405FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle SMA cable connection on the other. Our SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W02559/HS-18 can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02559/HS-18 RF cable has a FEP jacket of 0.105-inch diameter. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W02559/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W02559/HS-18 can also be used in the other direction and will be a right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 561 | |
| PE39436/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. MMCX Plug Right Angle to SMA Female Bulkhead Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly MMCX plug right angle to SMA female bulkhead cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to SMA female bulkhead cable 18 inch length using PE-SR405FLJ coax with heatshrink, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and SMA bulkhead cable connection on the other. Our right angle MMCX to SMA cable assemblies have a plug gender on end 1 and female on end 2. PE39436/HS-18 can also be known as a right angle MMCX male to SMA jack cable assembly and will be shipped same-day as it is purchased. MMCX male to SMA jack cable assembly PE39436/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with right angle MMCX to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39436/HS-18 can also be used in the other direction and will be SMA female bulkhead to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMA cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to SMA female bulkhead cable 18 inch length using PE-SR405FLJ coax with heatshrink. |
| 532 | ||
| PE3W04384LF/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SSMC Plug Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SSMC plug cable 18 inch length using PE-SR405FLJ coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SSMC plug cable 18 inch length using PE-SR405FLJ coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SSMC cable connection on the other. Our SMA to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3W04384LF/HS-18 can also be known as a SMA plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04384LF/HS-18 RF cable has a FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our SMA male to SSMC plug cable has a maximum VSWR of 1.4:1. SMA plug to SSMC male cable assembly PE3W04384LF/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a stainless steel body with gold plating, while the other has the clamp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W04384LF/HS-18 can also be used in the other direction and will be a SSMC plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SSMC RF cable assembly as per your requirements. |
| 428 | ||
| PE3C0062LF/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0062LF/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C0062LF/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder. |
| 162 | ||
| PE3C10780/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-FR, RF Cable Type: LMR-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. Fire Rated N Male to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-600-FR Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C10780/HS-180 low loss type N male to right angle type N male RF cable assembly using LMR-600-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N male to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C10780/HS-180 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10780/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. This PE3C10780/HS-180 type N plug to type N plug cable assembly is built with LMR-600-FR, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 180-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C10780/HS-180 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. This low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 160 | ||
| PE3W08827/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male Right Angle to SMA Male Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and a SMA cable connection on the other. Our right angle SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W08827/HS-18 can also be known as a right angle SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W08827/HS-18 RF cable has a FEP jacket of 0.161-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our right angle SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W08827/HS-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance. One connector features the solder/solder attachment method and a stainless steel body with gold plating, while the other has the solder (without contact) attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W08827/HS-18 can also be used in the other direction and will be a SMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 126 | ||
| PE3W08827LF/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Right Angle Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male right angle cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male right angle cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W08827LF/HS-18 can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W08827LF/HS-18 is built with PE-SR402FLJ which is a corrugated coax type. The Pasternack corrugated SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance. RF specs on this 12.4 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08827LF/HS-18 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder. |
| 126 | ||
| PE3C5133/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male Right Angle to 7/16 DIN Male Low Loss Cable 180 Inch Length Using LMR-600 Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male right angle to 7/16 DIN male low loss cable 180 inch length using LMR-600 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to 7/16 DIN male low loss cable 180 inch length using LMR-600 coax with Times Microwave components with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and 7/16 DIN cable connection on the other. Our low loss right angle N type to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3C5133/HS-180 can also be known as a low loss right angle type N plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN plug cable assembly PE3C5133/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency N type right angle male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5133/HS-180 can also be used in the other direction and will be 7/16 DIN male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to 7/16 DIN male low loss cable 180 inch length using LMR-600 coax with Times Microwave components with heatshrink. |
| 5 | ||
| PE3W11930/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Reverse Polarity TNC Jack Bulkhead to SMA Male Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink., Radio frequency assembly reverse polarity TNC jack bulkhead to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity TNC jack bulkhead to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC bulkhead cable connection on one end and SMA cable connection on the other. Our reverse polarity TNC to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W11930/HS-18 can also be known as a reverse polarity TNC female to SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC female to SMA plug cable assembly PE3W11930/HS-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable reverse polarity TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance. RF specs on this reverse polarity TNC jack bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11930/HS-18 can also be used in the other direction and will be SMA male to reverse polarity TNC jack bulkhead cable assembly if the opposite connectivity is required. TNC reverse polarity female bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC jack bulkhead to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink. |
| 0 | ||
| PE3W17373/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. N Male to N Male Cable 18 Inch Length Using TCOM-600 Coax with HeatShrink., Pasternack’s PE3W17373/HS-18 type N male to type N male RF cable assembly using TCOM-600 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17373/HS-18 can also be known as a type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.81-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17373/HS-18 RF cable has a PE jacket of 0.59-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. This PE3W17373/HS-18 type N plug to type N plug cable assembly is built with TCOM-600, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. This type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C4436/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SSMC Plug to SSMC Plug Cable 18 Inch Length Using RG316-DS Coax with HeatShrink., Pasternack’s PE3C4436/HS-18 SSMC plug to SSMC plug RF cable assembly using RG316-DS coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMC plug to SSMC plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SSMC cable connection on one end and a SSMC cable connection on the other. Our SSMC to SSMC cable assembly has a plug gender on end 1 and a plug on end 2. PE3C4436/HS-18 can also be known as a SSMC male to SSMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.156-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. SSMC to SSMC cable from Pasternack is ideal for applications including ssmc cable general purpose test, data acquisition systems, a, d conversion systems, ultra wideband digital receivers and software defined radio (sdr). This cable assembly employs durable and flexible materials, and with a 0.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C4436/HS-18 RF cable has an FEP jacket of 0.114-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SSMC plug to SSMC plug cable has a maximum VSWR of 1.5:1. This PE3C4436/HS-18 SSMC male to SSMC male cable assembly is built with RG316-DS, which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to SSMC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This SSMC male to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMC to SSMC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMC to SSMC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W01814/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W01814/HS-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01814/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W01814/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C1446/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male Right Angle to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink., Radio frequency assembly N male right angle to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C1446/HS-180 can also be known as a low loss right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1446/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C1446/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2605/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-DB coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-DB coax with Times Microwave components with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C2605/HS-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C2605/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600-DB coax with Times Microwave components with heatshrink. |
| 0 | ||
| PE3W00121LF/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using PE-SR402FL Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male cable 18 inch length using PE-SR402FL coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 18 inch length using PE-SR402FL coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W00121LF/HS-18 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W00121LF/HS-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance. Both the connectors have a solder (without contact) attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
![]() Venkel Ltd. | WRFI0402-S-18NGT | VENKEL LTD | Wirewound RF Inductor;0402;18nH;�2% RoHS : Not Compliant | 16,000 | ||
| WRFI0603-S-18NKT | VENKEL LTD | Wirewound RF Inductor;0603;18nH;�10% RoHS : Not Compliant | 8,000 | |||
| WRFI0805-S-18NKT | VENKEL LTD | Wirewound RF Inductor;0805;18nH;�10% RoHS : Not Compliant | 0 | |||
| WRFI1008-S-18NKT | VENKEL LTD | Wirewound RF Inductor;1008;18nH;�10% RoHS : Not Compliant | 0 | |||
| WRFI0603-S-18NGT-13 | VENKEL LTD | Wirewound RF Inductor;0603;18nH;�2% RoHS : Not Compliant | 0 | |||
| SHPI626630S-180MU | VENKEL LTD | Shielded High Power Inductor;626630;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI626650S-180MU | VENKEL LTD | Shielded High Power Inductor;626650;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI121260S-180MU | VENKEL LTD | Shielded High Power Inductor;121260;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI121280S-180MU | VENKEL LTD | Shielded High Power Inductor;121280;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI737345S-181MU | VENKEL LTD | Shielded High Power Inductor;737345;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| SHPI626630S-181MU | VENKEL LTD | Shielded High Power Inductor;626630;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| WRFI0402-S-18NJT | VENKEL LTD | Wirewound RF Inductor;0402;18nH;�5% RoHS : Not Compliant | 0 | |||
| SHPI121280S-181MU | VENKEL LTD | Shielded High Power Inductor;121280;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| SHPI121210S-180MU | VENKEL LTD | Shielded High Power Inductor;121210;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI121210S-181MU | VENKEL LTD | Shielded High Power Inductor;121210;Standard;180uH;�20% RoHS : Compliant | 0 | |||
![]() Vyrian | SN74S182NP1 | Texas Instruments | Look-Ahead Carry Generator, TTL, PDIP16 RoHS : Not Compliant | 13,300 | ||
| SN74S181FN | Texas Instruments | Arithmetic Logic Unit, S Series, 4-Bit, TTL, PQCC28 RoHS : Not Compliant | 6,250 | |||
| DS1840K-000 | Analog Devices Inc | 4,650 | ||||
| DS1819AR-20 | Analog Devices Inc | Power Supply Management Circuit, Fixed, 1 Channel, PDSO5 RoHS : Not Compliant | 3,850 | |||
| SN54S189J | Texas Instruments | Standard SRAM, 16X4, 50ns, TTL, PDIP16 RoHS : Not Compliant | 3,000 | |||
| DS1806S-100+T&R | Analog Devices Inc | Digital Potentiometer, 100000ohm, 3-wire Serial Control Interface, 64 Positions, PDSO20 RoHS : Compliant | 2,750 | |||
| DS1818R-5-U+ | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.06V, PDSO3 RoHS : Compliant | 1,350 | |||
| SN54S182J-00 | Texas Instruments | Look-Ahead Carry Generator, S Series, 4-Bit, TTL, CDIP16 | 1,300 | |||
| DS1809Z-010+T&R | Analog Devices Inc | Analog Circuit, 1 Func, PDSO8 RoHS : Compliant | 1,100 | |||
| DS1815R-10 | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.88V, CMOS, PDSO3 RoHS : Not Compliant | 1,000 | |||
| DS1836A-05 | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.63V, CMOS, PDIP8 RoHS : Not Compliant | 540 | |||
| DS1804Z-C01+T&R | Analog Devices Inc | 450 | ||||
| DS1803S-050 | Analog Devices Inc | Digital Potentiometer, 50000ohm, 2-wire Serial Control Interface, 256 Positions, PDSO16 RoHS : Not Compliant | 410 | |||
| DS1803E-100/T&R/C01 | Analog Devices Inc | Digital Potentiometer | 390 | |||
| DS1804U-010+T&R | Analog Devices Inc | Digital Potentiometer, 1 Func, 10000ohm, Increment/decrement Control Interface, 100 Positions, PDSO8 RoHS : Compliant | 360 | |||
![]() Win Source Electronics | DS18B20 | Nexperia | 11 B -55 ~ 125C 1-WIRE DIGITAL, |
| 160,000 | |
| DS18B20+ | Maxim Integrated Products | SENSOR TEMPERATURE 1-WIRE TO92-3 RoHS : Compliant |
| 100,000 | ||
DS1832S![]() | Maxim Integrated Products | IC SUPERVISOR 1 CHANNEL 8SOIC / 3.3-Volt MicroMonitor Chip RoHS : Not Compliant |
| 85,000 | ||
DS1804Z-010![]() | Maxim Integrated Products | IC DGTL POT 10KOHM 100TAP 8SOIC RoHS : Not Compliant |
| 67,500 | ||
| DS18S20Z+T | Maxim Integrated Products | SENSOR TEMPERATURE 1-WIRE 8SOIC |
| 42,500 | ||
TVS1800DRVR![]() | Texas Instruments | UNIDIR PRECISION SURGE DIODE / RoHS : Compliant |
| 31,840 | ||
SN75ALS181NSRG4![]() | Texas Instruments | IC DIFF LINE DRVR/RCVR 14SO RoHS : Compliant |
| 29,160 | ||
| DS18B20U+T | Maxim Integrated Products |
| 19,080 | |||
| DS1813R-10+T | Maxim Integrated Products |
| 6,410 | |||
DS1813R-10+T&R![]() | Maxim Integrated Products | IC 4.35V W/PB 10% SOT23-3 RoHS : Compliant |
| 6,320 | ||
MCP23S18-E/SO![]() | Microchip Technology Inc | 16-Bit I/O Expander with Open-Drain Outputs RoHS : Compliant |
| 5,400 | ||
TMDS181IRGZR![]() | Texas Instruments | TMDS181x 6 Gbps TMDS Retimer | IC RETIMER DVI HDMI 6GBPS 48VQFN RoHS : Compliant |
| 5,002 | ||
DS1813R-5/T&R![]() | Maxim Integrated Products | IC SUPERVISOR 1 CHANNEL SOT23-3 RoHS : Not Compliant |
| 2,140 | ||
MCP23S18T-E/SO![]() | Microchip Technology Inc | IC I/O EXPANDER SPI 16B 28SOIC RoHS : Compliant |
| 1,927 | ||
| DS18S20Z+ | Maxim Integrated Products | Temp Sensor Digital Serial (1-Wire) 8-Pin SOIC N / SENSOR TEMPERATURE 1-WIRE 8SOIC RoHS : Compliant |
| 100 | ||
![]() Wuhan P&S | SM8S18AHE3_A/I | Vishay Intertechnologies | Surface Mount Transient Voltage Suppressors RoHS : Compliant |
| 27,000 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |