| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty.
BuyNow |
ComSIT USA | DS1818R20TR
| Analog Devices Inc | AVAILABLE EU | | 1,944
 |
ComSIT USA | BZT52B5V6VGS18
| Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 5.6V V(Z), 1.96%, 0.41W, Silicon, Unidirectional
RoHS : Compliant | | 165,670
|
ZMY20GS18
| Vishay Intertechnologies | ZENER DIODE Zener Diode, 20V V(Z), 6%, 1W, Silicon, Unidirectional, DO-213AB
RoHS : Compliant | | 60,000
|
TZMB6V8GS18
| Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 6.8V V(Z), 2%, 0.5W, Silicon, Unidirectional, DO-213AA
RoHS : Compliant | | 60,000
|
TZMC30GS18
| Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 30V V(Z), 5%, 0.5W, Silicon, Unidirectional, DO-213AA
RoHS : Compliant | | 50,000
|
TZMB9V1GS18
| Vishay Intertechnologies | Zener Diode, 9.1V V(Z), 2%, 0.5W, Silicon, Unidirectional
RoHS : Compliant | | 40,000
|
TZMC22GS18
| Vishay Intertechnologies | Zener Diode, 22V V(Z), 5%, 0.5W, Silicon, Unidirectional
RoHS : Compliant | | 10,000
|
1N4148WSVGS18
| Vishay Intertechnologies | SMALL SIGNAL FAST SWITCHING DIODE Rectifier Diode, 1 Phase, 1 Element, 0.15A, 100V V(RRM), Silicon
RoHS : Compliant | | 10,000
|
VLME31N2Q134GS18
| Vishay Intertechnologies | Electronic Component
RoHS : Compliant | | 8,000
|
ZM4742AGS18
| Vishay Intertechnologies | ZENER DIODE Zener Diode, 12V V(Z), 5%, 1W, Silicon, Unidirectional, DO-213AB
RoHS : Compliant | | 5,000
|
TS1851IDT
 | STMicroelectronics | 1.8V INPUT/OUTPUT RAIL-TO-RAIL LOW POWER OPERATIONAL AMPLIFIER Operational Amplifier, 1 Func, 3000uV Offset-Max, BIPolar, PDSO8
RoHS : Compliant | | 2,500
|
1S1885A
| Toshiba America Electronic Components | SILICON DIFFUSED TYPE RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 1.2A, 100V V(RRM), Silicon, DO-15
RoHS : Not Compliant | | 1,800
|
DS181215
| Maxim Integrated Products | 5V ECONORESET WITH ACTIVE HIGH PUSH-PULL OUTPUT Power Supply Support Circuit, Fixed, 1 Channel, +4.13VV, CMOS, PBCY3
RoHS : Not Compliant | | 1,300
|
Z8S18020VSC
 | Zilog Inc | ENHANCED MICROPROCESSOR WITH FASTER EXECUTION, POWER-SAVER MODE, LOW EMI Microprocessor, 8-Bit, 20MHz, CMOS, PQCC68
RoHS : Not Compliant | | 112
|
ICS1893CFILE
| ics | 3.3-V 10BASE-T/100BASE-TX INTEGRATED PHYCEIVER Interface Circuit, 1-Trnsvr, CMOS, PDSO48
RoHS : Compliant | | 17
|
EP2S180F1020C4N
 | Altera Corporation | STRATIX II FPGA Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1020
RoHS : Compliant | | 5
|
PEI Genesis | EXS-18-H6-20-313PN-05
| Amphenol Corporation | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
 |
RTS1BS18N23P03
| Amphenol Sine Systems | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
S1802-04-1.5-34
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
S1802-13-1.5-34
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
S1802-28-2.0-12
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
S1814-2712T
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
S1844-65R30SD
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
S1852-64-34
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
S1895-09R02-3H
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
S1895-28R01-3H
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
S4160CS1807-12
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
S5283S1812CN6-109
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
85330ES1808P6
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
85337RS1808P6L
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
AE83383S18317
| Aero-Electric Connector Inc |
RoHS : Compliant | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
PUI | CBW57-HS-18A
| | | | 122
|
0103-1P07S18TSAA01
| | | | 5
|
Rutronik | TZMC12-GS18
| Vishay Intertechnologies | Z-DIODE 0,5W 12V 5% MINIMELF
RoHS : Compliant | 10,000 : $0.0165
20,000 : $0.0162
30,000 : $0.016
40,000 : $0.0159
60,000 : $0.0156
|
| 170,000
|
TZMC5V1-GS18
| Vishay Intertechnologies | Z-DIODE 0,5W 5,1V 5% MINIMELF
RoHS : Compliant | 10,000 : $0.0165
20,000 : $0.0162
30,000 : $0.016
40,000 : $0.0159
60,000 : $0.0156
|
| 80,000
|
TZMC10-GS18
| Vishay Intertechnologies | Z-DIODE 0,5W 10V 5% MINIMELF
RoHS : Compliant | 10,000 : $0.0165
20,000 : $0.0162
30,000 : $0.016
40,000 : $0.0159
60,000 : $0.0156
|
| 70,000
|
TZMC3V9-GS18
| Vishay Intertechnologies | Z-DIODE 0,5W 3,9V 5% MINIMELF
RoHS : Compliant | | 30,000
|
TZMC18-GS18
| Vishay Intertechnologies | Z-DIODE 0,5W 18V 5% MINIMELF
RoHS : Compliant | 10,000 : $0.0165
20,000 : $0.0162
30,000 : $0.016
40,000 : $0.0159
60,000 : $0.0156
|
| 30,000
|
TZMC75-GS18
| Vishay Intertechnologies | Z-DIODE 0,5W 75V 5% MINIMELF
RoHS : Compliant | | 20,000
|
TZMC30-GS18
| Vishay Intertechnologies | Z-DIODE 0,5W 30V 5% MINIMELF
RoHS : Compliant | 10,000 : $0.0165
20,000 : $0.0162
30,000 : $0.016
40,000 : $0.0159
60,000 : $0.0156
|
| 20,000
|
TZMC36-GS18
| Vishay Intertechnologies | Z-DIODE 0,5W 36V 5% MINIMELF
RoHS : Compliant | 10,000 : $0.0165
20,000 : $0.0162
30,000 : $0.016
40,000 : $0.0159
60,000 : $0.0156
|
| 20,000
|
TZMC4V7-GS18
| Vishay Intertechnologies | Z-DIODE 0,5W 4,7V 5% MINIMELF
RoHS : Compliant | 10,000 : $0.0165
20,000 : $0.0162
30,000 : $0.016
40,000 : $0.0159
60,000 : $0.0156
|
| 20,000
|
ZMY62-GS18
| Vishay Intertechnologies | Z-DIODE 1,0W 62V 5% MELF
RoHS : Compliant | | 10,000
|
LL4148-GS18
| Vishay Intertechnologies | SI-DIODE 0,150A 100V MINIMELF
RoHS : Compliant | 10,000 : $0.0064
20,000 : $0.0064
40,000 : $0.0064
80,000 : $0.0064
160,000 : $0.0064
|
| 10,000
|
ZMY51-GS18
| Vishay Intertechnologies | Z-DIODE 1,0W 51V 5% MELF
RoHS : Compliant | | 10,000
|
BZT55C12-GS18
| Vishay Intertechnologies | Z-DIODE 0,5W 12V 5% QUADROMELF
RoHS : Compliant | 10,000 : $0.022
20,000 : $0.0216
30,000 : $0.0214
40,000 : $0.0212
50,000 : $0.0208
|
| 10,000
|
TZMC27-GS18
| Vishay Intertechnologies | Z-DIODE 0,5W 27V 5% MINIMELF
RoHS : Compliant | 10,000 : $0.0165
20,000 : $0.0162
30,000 : $0.016
40,000 : $0.0159
60,000 : $0.0156
|
| 10,000
|
TZMC39-GS18
| Vishay Intertechnologies | Z-DIODE 0,5W 39V 5% MINIMELF
RoHS : Compliant | 10,000 : $0.0165
20,000 : $0.0162
30,000 : $0.016
40,000 : $0.0159
60,000 : $0.0156
|
| 10,000
|
Braemac Americas-Symmetry | AMMLPDBLCS-18.4320T
| Abracon Corporation | | | 0
|
AMMLPEBLJS-18.4320T
| Abracon Corporation | | | 0
|
AMMLPFLAVRS-18.4320T
| Abracon Corporation | | | 0
|
770-RPS1831-200G
| DFI Inc | RPS183-H610EDB, 2 DDR5, Rear I/O (2 DP*++, 2 LAN, 2 USB 3.2 Gen2, 2 USB 2.0 Type A), Internal I/O (1 M.2 M/B/E Key, 1 eDP*, 1 HDMI*, 2 USB 3.2 Gen1, 1 USB 2.0 Type A), w/TPM, DC19~24V, -5 to 65 C | | 0
|
ABLS-18.432MHZ-20-B-3-H-T
 | Abracon Corporation | CRYSTAL 18.4320MHZ 20PF SMD
RoHS : Compliant | | 0
|
AMMLPEBVRS-18.4320T
| Abracon Corporation | | | 0
|
CFM600S180
| Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply | | 0
|
EC2645ETTTS-18.432M TR
| Abracon Corporation | Standard Clock Oscillator 18.432MHz SMD 5.0mm x 7.0mm 50ppm -40C to +85C | | 0
|
AMMLPABVCS-18.4320T
| Abracon Corporation | | | 0
|
AMMLPDBVJS-18.4320T
| Abracon Corporation | | | 0
|
AMMLPEBVCS-18.4320T
| Abracon Corporation | | | 0
|
AMMLPFLBXJS-18.4320T
| Abracon Corporation | | | 0
|
AMMLPVBLJS-18.4320T
| Abracon Corporation | | | 0
|
CFM500S180-PC
| Cincon Electronics Corporation | AC-DC AC-DC MODULES
RoHS : Compliant | | 0
|
AMMLPDBVRS-18.4320T
| Abracon Corporation | | | 0
|
Chip-Germany GmbH | ABLS-18.432MHZ-B2-T
| Abracon Corporation | | | 49
|
WS18-3D460
| SICK AG | | | 1
|
Component Electronics, Inc | 1008CS-180XJLC
| Coilcraft Inc | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $0.5
100 : $0.58
1 : $0.77
|
| 1,750
|
DS1803Z-010-T/R
| Dallas Semiconductor | IN STOCK SHIP TODAY | 1,000 : $3.5
100 : $4.04
1 : $5.38
|
| 1,510
|
1008LS-182XKBB
| Coilcraft Inc | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $0.5
100 : $0.58
1 : $0.77
|
| 900
|
1008CS-180XJBB
| Coilcraft Inc | IN STOCK SHIP TODAY
RoHS : Not Compliant | 1,000 : $0.5
100 : $0.58
1 : $0.77
|
| 110
|
SCS18B48-10.000MHZ
| Suntsu Electronics Inc | IN STOCK SHIP TODAY | 1,000 : $0.25
100 : $0.29
1 : $0.38
|
| 100
|
DS1833A
| Dallas Semiconductor | IN STOCK SHIP TODAY | | 64
|
S1812R-474K
| API Delevan | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $2.25
100 : $2.6
1 : $3.46
|
| 56
|
DS1867-100
| Dallas Semiconductor | IN STOCK SHIP TODAY
RoHS : Not Compliant | 1,000 : $5.0
100 : $5.77
1 : $7.69
|
| 34
|
NAS1831A4B16
| | IN STOCK SHIP TODAY | | 28
|
MS18235-1BT
| Dialight | IN STOCK SHIP TODAY | 1,000 : $7.5
100 : $8.65
1 : $11.54
|
| 20
|
MTLW-140-05-T-S-185
| Samtec Inc | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $2.5
100 : $2.88
1 : $3.85
|
| 10
|
Z8S18020VSC
| Zilog Inc | IN STOCK SHIP TODAY
RoHS : Not Compliant | 1,000 : $12.5
100 : $14.42
1 : $19.23
|
| 5
|
BM90-220S18-00
| Enargy Power Corporation | IN STOCK SHIP TODAY | 1,000 : $30.0
100 : $34.62
1 : $46.15
|
| 4
|
S8VS-18024
| OMRON Corporation | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $250.0
100 : $288.46
1 : $384.62
|
| 2
|
MS18237-1
| Dialight | IN STOCK SHIP TODAY | 1,000 : $5.0
100 : $5.77
1 : $7.69
|
| 1
|
DB Roberts | NAS1829C3C12
| Military Specifications | | 1 : $1.2423
100 : $0.873
500 : $0.6872
1,000 : $0.5667
2,500 : $0.5667
|
| 2,500
|
SS182RF9C070L-24-02
| Tech-Etch | CLIP-ON CYLINDRICAL RADIUS | | 7
|
BOS-180
| Sugatsune Kogyo Co Ltd | | | 0
|
RS-1809-0562
| Heyco | RS 0187 OD X091 ID X562 LG NAT | | 0
|
27XTS1870442
| Essentra Components | FIR TREE RIVET, .182-.192 HOLE | | 0
|
D4-A35T12DSS18PSNA
| Southco | D4-A35T12DSS18PSNA | | 0
|
D4-A35T51DSS18PSNA
| Southco | D4-A35T51DSS18PSNA | | 0
|
NAS1829C3A05
| RAF Electronic Hardware | | | 0
|
NAS1831AC3B04
| RAF Electronic Hardware | 3/16 FEMALE FEMALE STANDOFF | | 0
|
MSCBS-18-01
| Essentra Components | CB SptThrd MLMtrcNat1-1/8 in Spc | | 0
|
010832S187
| Essentra Components | SET SCREW, SLOTTED HEAD, 8-32 | | 0
|
D4-A5T14DSS18PSNA
| Southco | D4-A5T14DSS18PSNA | | 0
|
RS-1809-0750
| Heyco | RS 0187 OD X091 ID X750 LG NAT | | 0
|
D4-A35T15DSS18PSNA
| Southco | D4-A35T15DSS18PSNA | | 0
|
D4-A5T23DSS18PSNA
| Southco | D4-A5T23DSS18PSNA | | 0
|
FDH Electronics | MS18029-23
| Marco | Terminals & Spl | 1 : $9.859
5 : $9.859
10 : $8.532
25 : $8.066
50 : $8.066
100 : $7.649
250 : $7.519
500 : $7.519
1,000 : $7.273
2,500 : $6.932
10,000 : $6.932
|
| 630
|
MS3402DS18-1AZ
| Corsair Electrical Connectors Inc | Connector | 1 : $134.142
5 : $125.048
10 : $111.785
25 : $110.117
50 : $110.117
100 : $108.498
250 : $105.398
500 : $102.47
1,000 : $101.066
2,500 : $101.066
10,000 : $101.066
|
| 98
|
MS3402DS18-11P-LC
| Corsair Electrical Connectors Inc | Connector | 1 : $122.198
5 : $113.914
10 : $101.832
25 : $100.312
50 : $100.312
100 : $98.837
250 : $96.013
500 : $93.346
1,000 : $92.067
2,500 : $92.067
10,000 : $92.067
|
| 35
|
MS3402DS18-11PX
| Corsair Electrical Connectors Inc | Connector | 1 : $149.567
5 : $139.427
10 : $124.639
25 : $122.779
50 : $122.779
100 : $120.973
250 : $117.517
500 : $114.253
1,000 : $112.687
2,500 : $112.687
10,000 : $112.687
|
| 35
|
MS3402DS18-1E-LC
| Corsair Electrical Connectors Inc | Connector | 1 : $137.176
5 : $127.876
10 : $114.314
25 : $112.608
50 : $112.608
100 : $110.952
250 : $107.781
500 : $104.788
1,000 : $103.352
2,500 : $103.352
10,000 : $103.352
|
| 28
|
MS18029-6S-16
| R&B Electronics | Connector Acc | 1 : $54.511
5 : $54.511
10 : $47.173
25 : $44.6
50 : $44.6
100 : $42.293
250 : $41.576
500 : $41.576
1,000 : $40.213
2,500 : $38.328
10,000 : $38.328
|
| 25
|
MS3402DS18-22EY-LC
| Corsair Electrical Connectors Inc | Connector | 1 : $130.18
5 : $121.354
10 : $108.483
25 : $106.864
50 : $106.864
100 : $105.293
250 : $102.284
500 : $99.443
1,000 : $98.081
2,500 : $98.081
10,000 : $98.081
|
| 25
|
MS3402DS18-3A
| Corsair Electrical Connectors Inc | Connector | 1 : $125.925
5 : $117.388
10 : $104.938
25 : $103.372
50 : $103.372
100 : $101.851
250 : $98.941
500 : $96.193
1,000 : $94.875
2,500 : $94.875
10,000 : $94.875
|
| 22
|
MS18029-6S-5
| MilSpec Products Inc | Connector Acc | 1 : $39.517
5 : $39.517
10 : $33.632
25 : $25.495
50 : $25.495
100 : $23.593
250 : $22.909
500 : $22.909
1,000 : $22.909
2,500 : $22.909
10,000 : $22.909
|
| 3
|
MS18029-1S18
| R&B Electronics | Wire and Cable | | 2
|
MS18029-23
| Arvan Inc | Terminals & Spl | 1 : $5.972
5 : $5.972
10 : $4.976
25 : $4.019
50 : $4.019
100 : $3.667
250 : $3.371
500 : $3.371
1,000 : $3.371
2,500 : $3.371
10,000 : $3.371
|
| 1
|
MS18029-6S-16
| Arvan Inc | Terminal Strip | | 1
|
MS18029-1S-18
| R&B Electronics | Wire and Cable | 1 : $57.089
5 : $57.089
10 : $49.404
25 : $46.709
50 : $46.709
100 : $44.293
250 : $43.542
500 : $43.542
1,000 : $42.115
2,500 : $40.141
10,000 : $40.141
|
| 0
|
MS18029-23
| R&B Electronics | Wire and Cable | 1 : $21.314
5 : $21.314
10 : $17.762
25 : $14.346
50 : $14.346
100 : $13.088
250 : $12.032
500 : $12.032
1,000 : $12.032
2,500 : $12.032
10,000 : $12.032
|
| 0
|
MS18029-6S-5
| R&B Electronics | Connector Acc | 1 : $34.289
5 : $34.289
10 : $29.673
25 : $28.055
50 : $28.055
100 : $26.603
250 : $26.153
500 : $26.153
1,000 : $25.295
2,500 : $24.109
10,000 : $24.109
|
| 0
|
Maritex | SIL RNL A TYPE, 9PINS 1/8W 5%, 8X 100E
| Royal Electronic Factory (Thailand) Co Ltd | Chip array SMD; RA8x100R; 1/8W; 5% | 300 : $0.023
150 : $0.025
50 : $0.028
1 : $0.031
|
| 6,517
|
WS18P4SMA-B
| Cyg Wayon Circuit Protection Co Ltd | Transil Diode (TVS); 400W; 18V; 13.7A; bidirectional; -65+150 deg.C; SMD; DO214AC(SMA) | | 4,675
|
DCPS1821W-CT
| CONNTHERM | DC plug; female; inner diameter 2.1mm; outer diameter 5.5mm | 500 : $0.117
100 : $0.133
25 : $0.145
1 : $0.16
|
| 2,600
|
K5B FS 18X5X8-1.0-01
| King Core Electronics Inc | Ferrite core for flat cable EMI-RP19x6.5x8/RC10,/3528pcs/ RoHS KingCore | 1,008 : $0.082
252 : $0.087
126 : $0.1
25 : $0.115
1 : $0.355
|
| 2,432
|
DS1818R-5+T&R
| Analog Devices Inc | Power Management ICs (PMICs); DS1818R-5+T&R; ANALOG DEVICES; 3; 3.04 mm; 1.12 mm; SOT-23
RoHS : Compliant | 1,000 : $0.806
500 : $0.854
100 : $0.972
30 : $1.166
10 : $1.353
1 : $1.732
|
| 1,830
|
DCPS1831C
| CONNTHERM | DC plug; female; inner diameter 3.1mm; outer diameter 6.5mm | | 1,435
|
MPZ1608S181ATDH5
| TDK Corporation | Ferrite Beads; MPZ1608S181ATDH5; TDK; 600 �m; 0603; 180 ?; 50 m?
RoHS : Compliant | 4,000 : $0.016
1,500 : $0.018
500 : $0.022
50 : $0.029
1 : $0.091
|
| 1,029
|
PLS18S-CT
| CONNTHERM | Pin Header; pitch 2.54mm, 1x18 pins, assembly: THT; male; straight; single row | 500 : $0.046
150 : $0.05
100 : $0.067
1 : $0.119
|
| 1,000
|
DCPS1810B-CT
| CONNTHERM | DC plug; female; inner diameter 1.0mm; outer diameter 3.8mm | 500 : $0.094
100 : $0.103
25 : $0.139
1 : $0.174
|
| 980
|
DCPS1825-CT
| CONNTHERM | DC plug; female; inner diameter 2.5mm; outer diameter 5.5mm | 500 : $0.103
100 : $0.121
25 : $0.139
1 : $0.174
|
| 719
|
PBMS18S-CT
| CONNTHERM | Pin Header; pitch 2.00mm; 1x18 pins; assembly: THT; female; straight; single row | 500 : $0.133
250 : $0.153
100 : $0.169
1 : $0.176
|
| 500
|
QOS1.8432MHZ-TTL/CMOS-5V-30PPM-DIL8-ROHS
| Fronter Electronics Co Ltd | Quartz oscillator; 1.8432 MHz; 30ppm | 400 : $0.488
80 : $0.55
40 : $0.56
20 : $0.563
1 : $1.215
|
| 414
|
DS1819AR-10+T&R
| Analog Devices Inc | Power Management ICs (PMICs); DS1819AR-10+T&R; ANALOG DEVICES; 5; SOT-23; 1.3 mm; 3 mm
RoHS : Compliant | 300 : $2.839
100 : $3.182
30 : $3.857
10 : $4.486
1 : $6.008
|
| 368
|
DS1818R-10+T&R
| Analog Devices Inc | Power Monitors; DS1818R-10+T&R; ANALOG DEVICES; 1 V; 5.5 V
RoHS : Compliant | 1,000 : $1.064
300 : $1.138
100 : $1.222
30 : $1.402
10 : $1.675
1 : $2.102
|
| 22
|
DCPS1821-CT
| CONNTHERM | DC plug; female; inner diameter 2.1mm; outer diameter 5.5mm | 500 : $0.154
100 : $0.176
25 : $0.198
1 : $0.22
|
| 8
|
Neutron USA | AIS18F08AP024-Q65
| Altech Corporation | Proximity Sensors SENSOR-M18-S8.0-F-1030VDC 200MA-PNP-NO-65 CONNECTOR | | 50
|
S186ELDQ
| Banner Engineering Corp | Photoelectric Sensors S186ELD :Emitter; Range: depends on receiver; Input: 10-30 V dc; Output: Not Applicable; M12 Integral QD | | 7
|
ECS130US18
| XP Power | Power Supply; AC-DC; PSU, 130W, COMPACT OPEN FRAME
RoHS : Compliant | | 6
|
S18RW3L
| Banner Engineering Corp | Photoelectric Sensors EZ-BEAM S18 Series: Retro; Range: 2 m; Input: 20-250 V ac; Output: SPST Solid-state Dark Operate; 2 m (6.5 ft) Cable | | 4
|
QS18EP6DV
| Banner Engineering Corp | PE Sensor, Diffuse, Rectang w/M18 Mt, R: 0.6m, 10-30VDC, PNP, 2m Cable, 75224 | | 2
|
QS18UPAEQ8
| Banner Engineering Corp | Photoelectric Sensors WORLD-BEAM QS18U: Ultrasonic remote TEACH; Range: 50-500 mm; Input: 12-30 V dc; Output: PNP; Epoxy-encapsulated; 4-pin M12 Integral QD | | 2
|
QS18VN6DB
| Banner Engineering Corp | Sensor, World-Beam, Defuse, R: 450mm, 10-30VDC, L/D NPN, 2M Cable, 61663 | | 2
|
QS18UPAQ
| Banner Engineering Corp | Qs18U World-Beam, Ultrasonic Teach Mode, Range, 50, QS18U Series | | 1
|
QS18VP6AFF200Q5
| Banner Engineering Corp | PE Sensor, Adj FGS, Adj R: 30-200mm, 10-30VDC, PNP L/D, 6" PT QDM12, 11474 | | 1
|
BC5-S18-AZ3X
| TURCK Inc | Capacitive Sensor, M18 Barrel, R: 5/7.5 mm for F/NF, AC 2-wire NO, 20250 VAC, Cable | | 0
|
S18SP6DQPMA
| Banner Engineering Corp | Photoelectric Sensor, Diffuse, 100mm, 10-30VDC, PNP, QD, S18 | | 0
|
VMS-180C-48-CNF
| CUI Inc | AC/DC Power Supply, Single-OUT, 48V 3.75A 180W, 11-Pin Box, Covered, Adj Vout
RoHS : Compliant | | 0
|
QS18AB6AF300 W/30
| Banner Engineering Corp | PE Sensor, BGS Adj Field, R: 0.3m, 10-30VDC, NPN/PNP LO, 9m Cable, 11458 | | 0
|
QS18VN6LD
| Banner Engineering Corp | Photoelectric Sensor, Class 1 Laser Diffuse, 300mm, 10-30VDC, L/D NPN, 2m Cable, 73034 | | 0
|
QS18VN6LDQ5
| Banner Engineering Corp | Photoelectric Sensor, Laser Diffuse, 300mm, 10-30VDC, NPN, QD, QS18 | | 0
|
Pasternack Enterprises US | PE39437/HS-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink., Radio frequency assembly SMA male to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE39437/HS-18 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE39437/HS-18 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE39437/HS-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. | 1 : $128.99
25 : $122.54
50 : $116.09
100 : $110.93
|
| 434
|
PE3C0062LF/HS-180
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0062LF/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C0062LF/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder. | 1 : $224.99
25 : $213.74
50 : $202.49
100 : $193.49
|
| 162
|
PE3C0349/HS-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Female Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly SMA male to SMA female cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female cable 18 inch length using PE-SR405FLJ coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C0349/HS-18 can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C0349/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0349/HS-18 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 18 inch length using PE-SR405FLJ coax with heatshrink. | 1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59
|
| 157
|
PE3W17167/HS-180
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-LW600 Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 180 inch length using LMR-LW600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 180 inch length using LMR-LW600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17167/HS-180 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17167/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W17167/HS-180 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17167/HS-180 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $158.99
25 : $151.04
50 : $143.09
100 : $136.73
|
| 64
|
PE3W16752/HS-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using TCOM-240 Coax with HeatShrink., Pasternack’s PE3W16752/HS-18 SMA male to SMA male RF cable assembly using TCOM-240 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W16752/HS-18 can also be known as an SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.312-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16752/HS-18 RF cable has a PE jacket of 0.24-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W16752/HS-18 SMA plug to SMA plug cable assembly is built with TCOM-240, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. | 1 : $129.035
25 : $122.58
50 : $116.13
100 : $110.97
|
| 14
|
PE3W13564/HS-180
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-UF coax with Times Microwave components with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W13564/HS-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3W13564/HS-180 is built with LMR-600-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600-UF coax with Times Microwave components with heatshrink. | 1 : $241.99
25 : $229.89
50 : $217.79
100 : $208.11
|
| 0
|
PE39423/HS-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA male to SMA male cable 18 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 18 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE39423/HS-18 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE39423/HS-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. | 1 : $78.19
25 : $74.28
50 : $70.37
100 : $67.24
|
| 0
|
PE3W12044/HS-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Smooth Bore SMP Male Bulkhead to 2.92mm Male Cable 18 Inch Length Using RG405 Coax with HeatShrink., Radio frequency assembly smooth bore SMP male bulkhead to 2.92mm male cable 18 inch length using RG405 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Smooth bore SMP male bulkhead to 2.92mm male cable 18 inch length using RG405 coax with heatshrink, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and 2.92mm cable connection on the other. Our SMP to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. PE3W12044/HS-18 can also be known as a SMP plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. SMP plug to 2.92mm plug cable assembly PE3W12044/HS-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP male bulkhead to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12044/HS-18 can also be used in the other direction and will be 2.92mm male to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this smooth bore SMP male bulkhead to 2.92mm male cable 18 inch length using RG405 coax with heatshrink. | 1 : $288.99
25 : $274.54
50 : $260.09
100 : $248.53
|
| 0
|
PE3W09153/HS-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female Right Angle to SMA Female Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly SMP female right angle to SMA female cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to SMA female cable 18 inch length using PE-SR405FLJ coax with heatshrink, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and SMA cable connection on the other. Our right angle SMP to SMA cable assemblies have a female gender on end 1 and female on end 2. PE3W09153/HS-18 can also be known as a right angle SMP jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA jack cable assembly PE3W09153/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with right angle SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP right angle female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09153/HS-18 can also be used in the other direction and will be SMA female to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMA female cable 18 inch length using PE-SR405FLJ coax with heatshrink. | 1 : $162.99
25 : $154.84
50 : $146.69
100 : $140.17
|
| 0
|
PE3W12421/HS-180
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. 7/16 DIN Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly 7/16 DIN male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and type N cable connection on the other. Our low loss 7/16 DIN to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W12421/HS-180 can also be known as a low loss 7/16 DIN plug to N type plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3W12421/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency 7/16 DIN male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12421/HS-180 can also be used in the other direction and will be N type male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low loss 7/16 DIN plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to N type cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink. | 1 : $226.99
25 : $215.64
50 : $204.29
100 : $195.21
|
| 0
|
PE3W17134/HS-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. N Male to N Male Cable 18 Inch Length Using TCOM-600 Coax with HeatShrink., Pasternack’s PE3W17134/HS-18 type N male to type N male RF cable assembly using TCOM-600 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17134/HS-18 can also be known as a type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17134/HS-18 RF cable has a PE jacket of 0.59-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. This PE3W17134/HS-18 type N plug to type N plug cable assembly is built with TCOM-600, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. This type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. | 1 : $187.295
25 : $177.93
50 : $168.57
100 : $161.07
|
| 0
|
PE3W07633LF/HS-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to 3.5mm Male Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to 3.5mm male cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to 3.5mm male cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and 3.5mm cable connection on the other. Our SMA to 3.5mm cable assemblies have a male gender on end 1 and male on end 2. PE3W07633LF/HS-18 can also be known as a SMA plug to 3.5mm plug cable assembly and will be shipped same-day as it is purchased. SMA plug to 3.5mm plug cable assembly PE3W07633LF/HS-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to 3.5mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to 3.5mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07633LF/HS-18 can also be used in the other direction and will be 3.5mm male to SMA male cable assembly if the opposite connectivity is required. SMA plug to 3.5mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to 3.5mm cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to 3.5mm male cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder. | 1 : $301.99
25 : $286.89
50 : $271.79
100 : $259.71
|
| 0
|
PE3W17373/HS-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. N Male to N Male Cable 18 Inch Length Using TCOM-600 Coax with HeatShrink., Pasternack’s PE3W17373/HS-18 type N male to type N male RF cable assembly using TCOM-600 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17373/HS-18 can also be known as a type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.81-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17373/HS-18 RF cable has a PE jacket of 0.59-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. This PE3W17373/HS-18 type N plug to type N plug cable assembly is built with TCOM-600, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. This type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. | 1 : $135.885
25 : $129.09
50 : $122.3
100 : $116.86
|
| 0
|
PE3W11930/HS-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Reverse Polarity TNC Jack Bulkhead to SMA Male Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink., Radio frequency assembly reverse polarity TNC jack bulkhead to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity TNC jack bulkhead to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC bulkhead cable connection on one end and SMA cable connection on the other. Our reverse polarity TNC to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W11930/HS-18 can also be known as a reverse polarity TNC female to SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC female to SMA plug cable assembly PE3W11930/HS-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable reverse polarity TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance. RF specs on this reverse polarity TNC jack bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11930/HS-18 can also be used in the other direction and will be SMA male to reverse polarity TNC jack bulkhead cable assembly if the opposite connectivity is required. TNC reverse polarity female bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC jack bulkhead to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink. | 1 : $169.99
25 : $161.49
50 : $152.99
100 : $146.19
|
| 0
|
PE3W10051/HS-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Mini SMP Female Right Angle to SMP Female Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly mini SMP female right angle to SMP female cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMP female cable 18 inch length using PE-SR405FLJ coax with heatshrink, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and SMP cable connection on the other. Our right angle mini SMP to SMP cable assemblies have a female gender on end 1 and female on end 2. PE3W10051/HS-18 can also be known as a right angle mini SMP jack to SMP jack cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMP jack cable assembly PE3W10051/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable Mini SMP cable assembly is manufactured with right angle mini SMP to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency mini SMP right angle female to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10051/HS-18 can also be used in the other direction and will be SMP female to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMP cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMP female cable 18 inch length using PE-SR405FLJ coax with heatshrink. | 1 : $194.99
25 : $185.24
50 : $175.49
100 : $167.69
|
| 0
|
Relay Specialties | CBW57-HS-18A
| OptiFuse | Thermal Circuit Breaker; 18 A 125/250 VAC; 32/50 VDC M11 x 1.0 | 1 : $6.49
10 : $5.77
25 : $5.19
50 : $4.72
100 : $4.52
|
| 122
|
MS188-903
| Stancor | STANCOR RELAY | 1 : $8.06
5 : $7.81
10 : $7.58
25 : $7.35
50 : $6.63
|
| 11
|
TE Connectivity | WHDS-18-2
| TE Connectivity | STRAIN RELIEF, HD30, 18SZ, RA Primary Product Material: Steel Automotive Connector Accessory Type: Strain Relief Operating Temperature Range: -55 – 125 °C Operating Temperature Range: -67 – 257 °F Steel Strain Relief | TE Connectivity
RoHS : Compliant | | 938
|
WHDS-18-1
| TE Connectivity | STRAIN RELIEF, HD30, 18SZ, ST Primary Product Material: Steel Automotive Connector Accessory Type: Strain Relief Operating Temperature Range: -55 – 125 °C Operating Temperature Range: -67 – 257 °F Steel Strain Relief | TE Connectivity
RoHS : Compliant | | 298
|
HSC100S18RJ
| TE Connectivity | HSC100S 18R 5% Screw Terminal Resistance Value: 18 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Through-Hole Resistor | 18 Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant | | 22
|
HSC150S18KJ
| TE Connectivity | HSC150S 18K 5% Screw Terminal Resistance Value: 18K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Through-Hole Resistor | 18K Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant | | 21
|
HSC100S180RJ
| TE Connectivity | HSC100S 180R 5% Screw Terminal Resistance Value: 180 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Through-Hole Resistor | 180 Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant | | 14
|
Wuhan P&S | SM8S18AHE3_A/I
| Vishay Intertechnologies | Surface Mount Transient Voltage Suppressors
RoHS : Compliant | 1 : $19.18
100 : $6.4
500 : $5.92
1,000 : $5.76
|
| 27,000
|
German ▼ 
English
Chinese
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand