Luminaires may be altered for design improvement or discontinued without prior notice.

Toll free: 866.586.4647 Fax: 514.683.8872

260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5

LUMINIS.COM

LUMINIS

TYPE:

QUANTITY:

PROJECT:

CATALOG

NUMBER:

FIXTURE

WATTAGE

VOLTAGE

FINISH

OPTION

OPTION

OPTION

OPTION

MATERIALS

Eclipse is made of corrosion resistant 356 aluminum alloy with a copper (CU)

content of less than 0.1%.

LED printed circuit board is assembled with a cast aluminum heat sink designed

with fins pattern to optimize heat dissipation and luminaire efficacy. The

structural support arms are made with a built-in wire way. The driver is enclosed

in a separate cast aluminum chamber allowing a quick access for electrical

maintenance without disturbing the optical light chamber. The lower cast

aluminum housing fits on a 4” (102) or 5” (127) pole and contains all electrical

controls on a removable tray.

ELECTRICAL

LED

DRIVER

Standard driver is 0-10V dimming-ready (dims to 10%) with: 120-

277 multi-volt compatibility (50-60Hz), optional 347V on request,

minimum operating temperature of -30ºC/-22ºF, output over voltage

protection, output over current protection, output short circuit

protection with auto-recovery, and over temperature protection

(110ºC).

LED

Standard 4000K/80CRI. Optional 2700K, 3000K and 3500K.

Removable modular LED platform.

LIFE

75,000hrs L

145,000hrs L

FINISH

Five-stage preparation process including preheating of cast parts for air extraction,

and an environmentally friendly alloy sealant. Polyester powder coating is applied

through an electrostatic process and oven cured for long term finish.

MOUNTING

Maximum weight: 44lbs (20kg)

Eclipse is designed for ease of access and installation.

Standard luminaire fits on a 4” (102) or 5” (127) pole.

Alternate poles or wall attachments are proposed with high quality components

to meet multiple installation conditions.

CERTIFICATION

Tested to UL1598 and CSA 22.2 #250. ETL listed wet location.

Photometric testing performed by an independent laboratory in accordance

with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with

IESNA LM80 standards. CE certification on request.

Rated IP65.

1

1

3

2

4

6

5

ECLIPSE MAXI - LED

8” Pole/Wall mount

1- 30” dia. (762) X 3/16“ (5) thick aluminum

reflector disc with two sides painted white

enamel.

2- Set of two cast aluminum supporting arms.

3- LED sealed optical beam control lens.

4- Cast aluminum LED heat sink.

5- Cast aluminum upper electrical housing.

6- Cast aluminum lower electrical housing.

EC870

EC871

27”

(686)

30”

(762)

EC870

EPA: .70

15º

EC871

EPA: 1.87