LUMINIS.COM

TYPE:

QUANTITY:

PROJECT:

CATALOG

NUMBER:

FIXTURE

CCT

WATTAGE

VOLTAGE

FINISH

OPTION

OPTION

OPTION

Luminaires may be altered for design improvement or discontinued without prior notice.

Toll free: 866.586.4647 Fax: 514.683.8872

260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5

LUMINIS

MATERIALS

Prisma is made of an extruded aluminum housing designed to optimize

the functionality of the driver and the solid state components.

Prisma is available with a choice of two interchangeable reflectors.

-

Diffused prismatic refractor with a linear peripheral pattern providing

general upward illumination with efficient down lighting.

-

Aluminum reflector designed to optimize light source performance

and uniformity.

Ventilated cast aluminum heat sink to optimize heat management and

luminaire efficacy.

LED array is mechanically secured and easily removable for maintenance

or upgrade.

ELECTRICAL

LED

277 multi-volt compatibility (50-60Hz), operating temperature

range of -30ºC/-22ºF to 60ºC/140ºF, output over voltage

protection, output over current protection and output short

circuit protection with auto-recovery.

LED

Standard 4000K CCT (80 CRI) or 5000K (80 CRI). Optional

2700K, 3000K and 3500K. See electrical options.

LIFE

63,000hrs L

71,000hrs and 84,000hrs respectively).

FINISH

Polyester powder coating is applied through an electrostatic process and oven

cured for long term finish.

MOUNTING

Maximum weight: 14.5lbs (6.6kg)

Mounts on a standard 4” (102) octagonal electrical box with 3 1/2” (89) C/C

mounting holes.

CERTIFICATION

Tested to UL1598 and CSA 22.2 #250.

Photometric testing per LM79-2008, LED light source with LM80 certified

testing.

Ceiling pendant luminaire with a choice of diffused prismatic

refractor or an anodized aluminum reflector with two part

inner surface treatment. Upper etched surface combined with

multi-faceted specular lower part.

Optional attachments and accessories are available to

customize and adapt each luminaire to particular design

requirements.

1- Standard heavy duty 45º hang straight swivel, with 5”

diameter (127) canopy and universal mounting plate.

2- 7/8” diameter (22) X36” long (914) suspension stem. Precut

factory stems are available on request. (Specify STM with

desired length)

3- Removable top cover for quick maintenance.

4- Extruded aluminum driver housing module with a fine linear

stria pattern.

5- LED heat sink specifically designed to optimize heat

dissipation.

6- PR2228: Diffused prismatic refractor.

PR2230: Aluminum reflector.

Inner surface: multi-faceted specular anodized.

Exterior surface: Satin anodized natural aluminum.

Alternate exterior finish (Option RP8)

1

1

2

3

4

6

5

PR2228

PR2230

36”

(914)

22”

(558)

PR2228

23.5” (597)

PR2230

23” (584)

PRISMA 22” - LED

Pendant