LP5030 datasheet(13/57 Pages) TI1

13 / 57 page

Phase 1

Phase 2

Phase 3

Cycle Time

Phase 1

Phase 2

Phase 3

LED1

LED4

LED[3h (n-1)+1]

LED0

LED3

LED[3h (n-1)]

LED2

LED5

LED[3h (n-1)+2]

LP5030, LP5036

www.ti.com

SLVSEH1 – SEPTEMBER 2018

Product Folder Links: LP5030 LP5036

Submit Documentation Feedback

Feature Description (continued)

8.3.1.4 PWM Phase-Shifting

A PWM phase-shifting scheme allows delaying the time when each LED driver is active. When the LED drivers

are not activated simultaneously, the peak load current from the pre-stage power supply is significantly

decreased. The scheme also reduces input-current ripple and ceramic-capacitor audible ringing. LED drivers are

grouped into three different phases.

•

Phase 1—the rising edge of the PWM pulse is fixed. The falling edge of the pulse is changed when the duty

cycle changes. Phase 1 is applied to LED0, LED3, …, LED[3 × (n – 1)].

•

Phase 2—the middle point of the PWM pulse is fixed. The pulse spreads in both directions when the PWM

duty cycle is increased. Phase 2 is applied to LED1, LED4, …, LED[3 × (n – 1) + 1].

•

Phase 3—the falling edge of the PWM pulse is fixed. The rising edge of the pulse is changed when the duty

cycle changes. Phase 3 is applied to LED2, LED5, …, LED[3 × (n – 1) + 2].

•

For LP5030, n = 10. For LP5036, n = 12.

Figure 7. PWM Phase-Shifting

8.3.2 LED Bank Control

For most LED-animation effects, like blinking and breathing, all the RGB LEDs have the same lighting pattern.

Instead of controlling the individual LED separately, which occupies the microcontroller resources heavily, the

LP503x device provides an easy coding approach, the LED bank control.

Each channel can be configured as either independent control or bank control through the LEDx_Bank_EN

intensity-control registers. When LEDx_Bank_EN = 1, the LP503x device drives the LED in LED bank-control

mode. The LED bank has its own independent PWM control scheme, which is the same structure as the PWM

scheme of each channel. See Each Channel PWM Control for more details. When a channel configured as LED

bank-control mode, the related color mixing and intensity control is governed by the bank control registers

(BANK_A_COLOR, BANK_B_COLOR, BANK_C_COLOR, and BANK_BRIGHTNESS) regardless of the inputs

on its own color-mixing and intensity-control registers.

LP5030 Datenblatt(PDF) 13 Page - Texas Instruments

LP5030 Datenblatt(HTML) 13 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

Datenblatt Download

Link URL