2

-----

-----

Time

: 30 / 2 to 3 / 30 / 2 to 3 (Minutes)

5 cycles

Reflow

: At the recommended temperature profile

Manual soldering: 350ç ± 10ç for 5 seconds

1 mA

20 cycles

500 Mø min.

No flashover or insulation breakdown.

100 V DC

150 V AC /one minute, 120 V AC /one minute(0.4mm pitch type)

50 mø max.

100 mø max(0.4mm pitch type).

* Including FPC conductor resistance

Contact resistance: 50 mø max.

100 mø max(0.4mm pitch type).

No damage, cracks, or parts dislocation.

No electrical discontinuity of 1μs or more.

Contact resistance: 50 mø max.

100 mø max(0.4mm pitch type).

No damage, cracks, or parts dislocation.

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles

in each of the 3 directions.

waveform, 3 cycles in each of the 3 axis

Contact resistance: 50 mø max.

100 mø max(0.4mm pitch type).

Insulation resistance: 50 Mø min.

No damage, cracks, or parts dislocation.

96 hours at 40ç and humidity of 90% to 95%.

No deformation of components affecting performance.

■Materials

■Ordering information

FH 33 M H J - 12 (6) S B - 1 SH (10)

Series name:FH

Series No:33

Blank:0.5mm pitch,1mm pitch

M:0.4mm pitch

1

2

Material

LCP

PPS

LCP

PA

LCP

PPS

Phosphor bronze

PA

Color:Beige

Color:Deep brown

Color:Beige

Color:Black

Color:Beige

Color:Deep brown

Color:Beige

Color:Black

Gold flash plated

Pure tin reflow plated

UL94V-0

Finish

Remarks

Insulator

FH33 series

FH33J series

FH33M series

FH33MHJ series

Contacts

Metalfittings

Part

■Product Specifications

Ratings

Current rating

0.5 A

(0.4mm pitch type 0.4A)

Voltage rating

50 V AC

(0.4mm pitch type 40V AC)

Operating temperature range -55 ç to +85ç (Note 1)

Operating humidity range

Relative humidity 90% max.

(No condensation)

Storage temperature range -10ç to +50ç (Note 2)

Storage humidity range

Relative humidity 90% max. (No

condensation)

Recommended FPC

Thickness = 0.3 ± 0.05mm gold plated (under 30 pos.), 0.3 ± 0.03mm gold plated (over 31 pos.)

4. Durability

(insertion/ withdrawal)

5. Vibration

6. Shock

7. Humidity

(Steady state)

8. Temperature cycle

9. Resistance to

soldering heat

3. Contact resistance

1. Insulation resistance

2. Withstanding voltage

Item

Specification

Conditions

Note 1: Includes temperature rise caused by current flow.

Note 2: The term ”storage” refers to products stored for long period of time prior to mounting and use. Operating

Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage,

shipment or during transportation.

FH33 Series

10

11

12

1

3

4

2

5

6

7

8

9

3

Blank:Standard

J:Halogen-free

Flame retardance UL94V-0

Standard type:Number of contacts

Eccentric type:Number of contacts

in 1mm housing

5

Blank:Width 3.0mm(standard)

H:Width 3.5mm(long actuator type)

4

6

Contact alignment:S: single

Eccentric direction:

Blank:standard type

B:Eccentric type

8

Standard type:Blank

Eccentric type:Number of

contacts

9

Plating specifications:

Blank:Gold plated

(10)...Gold plating with nickel

barrier 5,000pieces/reel

(99)...Gold plating with nickel

barrier 500pieces/reel

Contact pitch:

0.4mm,0.5mm,1mm

SH:SMT horizontal mounting

12

10

11

7