REV. A

–4–

AD8354

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection. Although the

AD8354 features proprietary ESD protection circuitry, permanent damage may occur on devices

subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended

to avoid performance degradation or loss of functionality.

ABSOLUTE MAXIMUM RATINGS

*

Supply Voltage VPOS . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V

Input Power (re: 50

Ω) . . . . . . . . . . . . . . . . . . . . . . . . 10 dBm

Equivalent Voltage . . . . . . . . . . . . . . . . . . . . . . 700 mV rms

Internal Power Dissipation

Paddle Not Soldered . . . . . . . . . . . . . . . . . . . . . . . . 325 mW

Paddle Soldered . . . . . . . . . . . . . . . . . . . . . . . . . . . 812 mW

°C/W

°C/W

Maximum Junction Temperature . . . . . . . . . . . . . . . . . 150

°C

Operating Temperature Range . . . . . . . . . . . –40

°C to +85°C

Storage Temperature Range . . . . . . . . . . . . –65

°C to +150°C

Lead Temperature Range (Soldering, 60 sec) . . . . . . . . 240

°C

*Stresses above those listed under Absolute Maximum Ratings may cause perma-

nent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device reliability.

PIN CONFIGURATION

TOP VIEW

(Not to Scale)

8

1

NC = NO CONNECT

COM1

NC

INPT

COM1

VOUT

VPOS

COM2

COM2

AD8354

2

3

4

7

6

5

ORDERING GUIDE

Temperature

Package

Package

Model

Range

Description

Option

Branding

AD8354ACP-R2

–40

°C to +85°C

8-Lead LFCSP

CP-8

JCA

AD8354ACP-REEL7

–40

°C to +85°C

8-Lead LFCSP

CP-8

JCA

AD8354-EVAL

Evaluation Board

PIN FUNCTION DESCRIPTIONS

Pin No.

Mnemonic

Description

1, 8

COM1

Device Common. Connect to low

impedance ground.

2NCNo Connection.

3INPT

RF Input Connection. Must be

ac-coupled.

4, 5

COM2

Device Common. Connect to low

impedance ground.

6

VPOS

Positive Supply Voltage.

7

VOUT

RF Output Connection. Must be

ac-coupled.