8563 datasheet(10/23 Pages) PHOENIX

10 / 23 page

AXL E S3 DI8 DO4 2A M12 6P

8563_en_04

PHOENIX CONTACT

Connection example

Figure 7

Example of connection of sensors and

actuators

Connection notes

IN 6

+24 V

IN 5

OUT 2

Note: data corruption or loss

Implement the FE connection using mounting

screws, in order to ensure immunity to inter-

ference.

NOTE: device damage

To ensure IP65/IP67 protection, cover unused

sockets with protective caps.

NOTE: Damage to the electronics

Only supply the sensors with the voltage U

provided at the terminal points.

NOTE: Damage to the electronics

Observe the correct polarity of the supply volt-

ages U

S and UA in order to prevent damage to

the device.

NOTE: Malfunction

When connecting the sensors and actuators,

observe the assignment of the connections to

the Sercos input and output data.

Secure the device to a level surface or to a

profile. Do not use this device to bridge gaps,

in order to prevent forces being transmitted

via the device.

Use standard M5 screws with toothed lock

washer and self-locking nuts. Observe the

maximum torque of the screws.

8563 Datenblatt(PDF) 10 Page - PHOENIX CONTACT