Page 8 of 8
Data Sheet
MX205Q
Information furnished by MEMSIC is believed to be
accurate and reliable. However, no responsibility is
assumed by MEMSIC for its use, nor for any infringe-
ments of patents or other rights of third parties which
may result from its use. No license is granted by
implications or otherwise under any patent or patent
rights of MEMSIC.
Technical information.
Subject to change without notice.
Layout Notes
1. Use robust low inductance ground
wiring
2. Liberal use of ceramic bypass
capacitors
3. The capacitors should be located
as close as possible to the device
supply pins (VDA, VDD).
4. The capacitor lead length should
be as short as possible. Surface
mount capacitors are preferred.
Printed Circuit Board Layout and
Filter Requirements
®MEMSIC, Inc. 2000.
100 Burtt Road, Andover, MA 01810
Tel: 978.623.8188
•
Fax: 978.623.9945
www.memsic.com
MX201Q ANALOG Data Sheet N 8/1/01
Filtering Notes
1. Low pass filter – 200Hz, -3db
2. Ceramic capacitors C
3
, C
4
3. f = 1/2
πRC
4. Resistor R
3
, R
4
– 1/8 Watt,
5% tolerance
5. Reference Application Note
# AN-00MX-004
R3=
C3=
C4=
R4=
German ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
