WM8802SCFT datasheet(30/65 Pages) WOLFSON

Teilenummer	WM8802SCFT

Bauteilbeschribung	Digital Audio Interface Transceiver

PDF	65 Pages

Scroll/Zoom	100%

Hersteller	WOLFSON [Wolfson Microelectronics plc]

Direct Link	http://www.wolfsonmicro.com

Logo

30 / 65 page

WM8802

Product Preview

PP Rev 1.1 April 2004

RDATA

Output starts from the RLRCK edge immediately after RERR flag is lowered

RERR

Internal clock signal

RLRCK

Data

45 ms to 300 ms

Figure 21 Internal Lock Signal

CHANNEL STATUS OUTPUT

DATA CATEGORY SPECIFICATION BIT 1 OUTPUT ( AUDIO )

The AUDIO pin outputs bit 1 of the channel status indicating that the input bi-phase data is PCM

audio data. AUDIO status is immediately output upon detection of RERR even during High output.

An output ORed with IEC61937 or the DTS-CD/LD detection flag is also possible with AOSEL.

AUDIO

OUTPUT CONDITIONS

PCM audio data (CS bit 1 = Low)

Non-audio data (CS bit 1 = High

Table 12 AUDIO Output

EMPHASIS INFORMATION OUTPUT (EMPHA)

The EMPHA pin output indicates that the signal has the presence or absence of 50/15

µs emphasis

for consumer and broadcast studio.

EMPHA status is immediately output upon detection of RERR even during High output.

EMPHA

OUTPUT CONDITIONS

No pre-emphasis

50/15

µs pre-emphasis

Table 13 EMPHA Output

WM8802SCFT Datenblatt(PDF) 30 Page - Wolfson Microelectronics plc