www.cherryswitches.com

Page 2 of 2, Last update 2016-01-12, Specifications subject to change without notice.

Note: An external pull-up resistor is required, the value of which is dependent on the supply voltage. The resistor should be connected

between the output and Vcc. Refer to the wiring diagram for lead colors or pin numbering as applicable.

Recommended External Pull-Up Resistor

Volts DC

5

9

12

15

24

Ohms

1k

1.8k

2.4k

3k

3k

Open Collector Sinking Block Diagram

Dimensions mm (inches)