E5GN

E5GN

Wiring Terminals

from the internal circuits. When using a grounding thermocou-

ple, do not connect the control output terminals to the ground.

If the control output terminals are connected to the ground,

errors will occur in the measured temperature values as a

result of leakage current.

sections. If reinforced insulation is required, connect the input

and output terminals to a device without any exposed

current-carrying parts or to a device with standard insulation

suitable for the maximum operating voltage of the power

supply I/O section.

Analog input

Input power supply

Two input power supplies are available:

100 to 240 VAC or 24 VAC/VDC (no polarity).

Relay output

Voltage output

Alarm output

Control output

Cat. No. GCTC13

8/00

Specifications subject to change without notice.

Printed in U.S.A.

OMRON ELECTRONICS, INC.

One East Commerce Drive

Schaumburg, IL 60173

1-800-55-OMRON

OMRON CANADA, INC.

885 Milner Avenue

Scarborough, Ontario M1B 5V8

416-286-6465

R