1500 WATT LOW CAPACITANCE

TRANSIENT VOLTAGE SUPPRESSOR

Microsemi

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 4

Copyright

 2002

10-21-2004 REV C

SCOTTSD A L E DIVISION

LC6.5 thru LC170A

SCHEMATIC APPLICATIONS

The TVS low capacitance device configuration is shown in Figure 2. As a further option for unidirectional applications, an additional low

capacitance rectifier diode may be used in parallel in the same polarity direction as the TVS as shown in Figure 3. In applications where random

high voltage transients occur, this will prevent reverse transients from damaging the internal low capacitance rectifier diode and also provide a

low voltage conducting direction. The added rectifier diode should be of similar low capacitance and also have a higher reverse voltage rating

(2) low capacitance TVS devices in anti-parallel for bidirectional applications, this added protective feature for both directions (including the

reverse of each rectifier diode) is also provided. The unidirectional and bidirectional configurations in Figure 3 and 4 will both result in twice the

capacitance of Figure 2.

FIGURE 2

FIGURE 3

FIGURE 4

TVS with internal Low

Optional Unidirectional

Optional Bidirectional

Capacitance Diode

configuration (TVS and

configuration (two TVS

separate rectifier diode)

devices in anti-parallel)

in parallel)

PACKAGE DIMENSIONS

DO-13 (or DO-202AA)