74ACT153 datasheet(3/12 Pages) ONSEMI

3 / 12 page

MC74AC153, MC74ACT153

http://onsemi.com

Figure 2. Logic Symbol

Ea I0a I1a I2a I3a

I0b I1b I2b I3b Eb

FUNCTIONAL DESCRIPTION

The MC74AC153/74ACT153 is a dual 4−input

multiplexer. It can select two bits of data from up to four

sources under the control of the common Select inputs (S0,

S1). The two 4−input multiplexer circuits have individual

active−LOW Enables (Ea,Eb) which can be used to strobe

the outputs independently. When the Enables (Ea, Eb) are

HIGH, the corresponding outputs (Za, Zb) are forced LOW.

The MC74AC153/74ACT153 is the logic implementation

of a 2−pole, 4−position switch, where the position of the

switch is determined by the logic levels supplied to the two

Select inputs. The logic equations for the outputs are shown

below.

Za = Ea•(I0a•S1•S0+I1a•S1•S0+I2a•S1•S0+I3a•S1•S0)

Zb = Eb•(I0b•S1•S0+I1b•S1•S0+I2b•S1•S0+I3b•S1•S0)

Ea I0a

I3a

I0b

I1b

I2b

I3b Eb

Figure 3. Logic Diagram

NOTE: This diagram is provided only for the understanding of logic

operations and should not be used to estimate propagation

delays.

I1a

I2a

74ACT153 Datenblatt(PDF) 3 Page - ON Semiconductor