AP0201AT datasheet(2/31 Pages) ONSEMI

2 / 31 page

AP0201AT

www.onsemi.com

Features (continued)

• ON Semiconductor Custom UDP−based Protocol

• IPv4, IPv6, TCP, DHCP, QoS and ICMP4 Support

• Proxy Service for Customer Specific Protocol

• Metadata over Ethernet

• Hybrid Mode Operation: Configuration over Serial

Interface and Video over Ethernet

• AEC−Q101 Qualified and PPAP Capable

Applications

• Surround, Rear and Front View Cameras

• Blind Spot/Side Mirror Replacement Cameras

• Automotive Viewing/Processing Fusion Cameras

ORDERING INFORMATION

Table 2. AVAILABLE PART NUMBERS

Part Number

Product Description

Orderable Product Attribute Description

AP0201AT2L00XEGA0−DR

Ethernet Co−Processor, 100−ball VFBGA

Drypack

AP0201AT2L00XEGA0−TR

Ethernet Co−Processor, 100−ball VFBGA

Tape & Reel†

AP0201AT2L00XEGAD3−GEVK

AP0201AT Demo Kit

AP0201AT2L00XEGAH3−GEVB

AP0201AT Head Board

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

FUNCTIONAL OVERVIEW

Figure 1 shows the typical configuration of the

AP0201AT in a camera system. On the host side, commands

and image data are sent out over the Ethernet bus. The

AP0201AT interface to the sensor supports a parallel

interface or HiSPi interface.

Figure 1. AP0201AT Connectivity

NOTE: The Hybrid mode supports configuring the AP0201AT through the serial interface and streaming video over Ethernet.

Hybrid Mode can be enabled by loading an available patch. Please contact ON Semiconductor support.

AP0201AT Datenblatt(PDF) 2 Page - ON Semiconductor